Discuss

discuss@lists.centos.org

34758 discussions

Start a nNew thread

CentOS-announce Digest, Vol 87, Issue 13
by centos-announce-request＠centos.org 23 May '12

23 May '12

1 0

Reset adapter
by sebastian 23 May '12

23 May '12

Hi, one of our rented root-server has a problem with the network-adapter.The network is interrupted from time to time and i can not longer connect to our server. We can only reboote (remote) the server and restart the network. I think it was an network-driver-problem from an "Intel Corporation 82574L Gigabit Network" --- e1000e But now i have install a new kernel-driver and i have the same problem again. Here an extract of the logs: <---//first log with old driver//--- May 22 16:52:40 mega2 kernel: e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k May 22 16:52:40 mega2 kernel: e1000e: Copyright(c) 1999 - 2011 Intel Corporation. May 22 16:52:40 mega2 kernel: e1000e 0000:04:00.0: Disabling ASPM L0s May 22 16:52:40 mega2 kernel: e1000e 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 22 16:52:40 mega2 kernel: scsi 0:1:0:0: Direct-Access TOSHIBA MBF245LRC 6104 PQ: 1 ANSI: 5 May 22 16:52:40 mega2 kernel: scsi 0:1:1:0: Direct-Access TOSHIBA MBF245LRC 6104 PQ: 1 ANSI: 5 May 22 16:52:40 mega2 kernel: usb 1-1.2: new full speed USB device using ehci_hcd and address 3 May 22 16:52:40 mega2 kernel: scsi 0:3:0:0: Enclosure ADAPTEC Virtual SGPIO PQ: 0 ANSI: 5 May 22 16:52:40 mega2 kernel: Refined TSC clocksource calibration: 3092.973 MHz. May 22 16:52:40 mega2 kernel: Switching to clocksource tsc May 22 16:52:40 mega2 kernel: e1000e 0000:04:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:75:ad:38 May 22 16:52:40 mega2 kernel: e1000e 0000:04:00.0: eth0: Intel(R) PRO/1000 Network Connection May 22 16:52:40 mega2 kernel: e1000e 0000:04:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF May 22 16:52:40 mega2 kernel: e1000e 0000:05:00.0: Disabling ASPM L0s May 22 16:52:40 mega2 kernel: e1000e 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 May 22 16:52:40 mega2 kernel: usb 1-1.2: New USB device found, idVendor=0557, idProduct=2221 May 22 16:52:40 mega2 kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 May 22 16:52:40 mega2 kernel: usb 1-1.2: Product: Hermon USB hidmouse Device May 22 16:52:40 mega2 kernel: usb 1-1.2: Manufacturer: Winbond Electronics Corp May 22 16:52:40 mega2 kernel: usb 1-1.2: configuration #1 chosen from 1 choice May 22 16:52:40 mega2 kernel: input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 May 22 16:52:40 mega2 kernel: generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input0 May 22 16:52:40 mega2 kernel: input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input5 May 22 16:52:40 mega2 kernel: generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input1 May 22 16:52:40 mega2 kernel: input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6 May 22 16:52:40 mega2 kernel: e1000e 0000:05:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:75:ad:39 May 22 16:52:40 mega2 kernel: e1000e 0000:05:00.0: eth1: Intel(R) PRO/1000 Network Connection May 22 16:52:40 mega2 kernel: e1000e 0000:05:00.0: eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF May 22 16:52:40 mega2 kernel: scsi: waiting for bus probes to complete ... May 22 16:52:40 mega2 kernel: sd 0:0:0:0: [sda] 878686208 512-byte logical blocks: (449 GB/418 GiB) May 22 16:52:40 mega2 kernel: sd 0:0:0:0: [sda] Write Protect is off May 22 16:52:40 mega2 kernel: sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA May 22 16:52:40 mega2 kernel: sda: sda1 sda2 May 22 16:52:40 mega2 kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk May 22 16:52:40 mega2 kernel: dracut: Scanning devices sda2 for LVM logical volumes vg_r378120301/lv_root vg_r378120301/lv_swap May 22 16:52:40 mega2 kernel: dracut: inactive '/dev/vg_r378120301/lv_root' [50.00 GiB] inherit May 22 16:52:40 mega2 kernel: dracut: inactive '/dev/vg_r378120301/lv_home' [358.70 GiB] inherit May 22 16:52:40 mega2 kernel: dracut: inactive '/dev/vg_r378120301/lv_swap' [9.80 GiB] inherit May 22 16:52:40 mega2 kernel: EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: May 22 16:52:40 mega2 kernel: dracut: Mounted root filesystem /dev/mapper/vg_r378120301-lv_root May 22 16:52:40 mega2 kernel: SELinux: Disabled at runtime. May 22 16:52:40 mega2 kernel: type=1404 audit(1337698352.963:2): selinux=0 auid=4294967295 ses=4294967295 May 22 16:52:40 mega2 kernel: dracut: May 22 16:52:40 mega2 kernel: dracut: Switching root May 22 16:52:40 mega2 kernel: udev: starting version 147 May 22 16:52:40 mega2 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 May 22 16:52:40 mega2 kernel: scsi 0:1:0:0: Attached scsi generic sg1 type 0 May 22 16:52:40 mega2 kernel: scsi 0:1:1:0: Attached scsi generic sg2 type 0 May 22 16:52:40 mega2 kernel: scsi 0:3:0:0: Attached scsi generic sg3 type 13 May 22 16:52:40 mega2 kernel: ses 0:3:0:0: Attached Enclosure device May 22 16:52:40 mega2 kernel: iTCO_vendor_support: vendor-support=0 May 22 16:52:40 mega2 kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 May 22 16:52:40 mega2 kernel: iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) May 22 16:52:40 mega2 kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) May 22 16:52:40 mega2 kernel: i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 May 22 16:52:40 mega2 kernel: ACPI: I/O resource 0000:00:1f.3 [0x1180-0x119f] conflicts with ACPI region SMIO [0x1180-0x119f] May 22 16:52:40 mega2 kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver May 22 16:52:40 mega2 kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: May 22 16:52:40 mega2 kernel: EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: May 22 16:52:40 mega2 kernel: Adding 10272760k swap on /dev/mapper/vg_r378120301-lv_swap. Priority:-1 extents:1 across:10272760k May 22 16:52:40 mega2 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team May 22 16:52:40 mega2 kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max) May 22 16:52:40 mega2 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team May 22 16:52:40 mega2 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready May 22 16:52:40 mega2 kernel: e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None May 22 16:52:40 mega2 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready May 22 16:52:40 mega2 rpc.statd[1764]: Version 1.2.3 starting May 22 16:52:40 mega2 sm-notify[1765]: Version 1.2.3 starting May 22 16:52:40 mega2 kernel: RPC: Registered udp transport module. May 22 16:52:40 mega2 kernel: RPC: Registered tcp transport module. May 22 16:52:40 mega2 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module. May 22 16:52:40 mega2 lldpad: bound ctrl iface to /com/intel/lldpad May 22 16:52:40 mega2 kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb(a)candelatech.com> May 22 16:52:40 mega2 kernel: All bugs added by David S. Miller <davem(a)redhat.com> May 22 16:52:40 mega2 kernel: 8021q: adding VLAN 0 to HW filter on device eth0 May 22 16:52:40 mega2 kernel: bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.8 (Oct 02, 2011) ... ... ... May 23 00:01:24 mega2 kernel: ------------[ cut here ]------------ May 23 00:01:24 mega2 kernel: WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x26d/0x280() (Not tainted) May 23 00:01:24 mega2 kernel: Hardware name: X9SCL/X9SCM May 23 00:01:24 mega2 kernel: NETDEV WATCHDOG: eth0 (e1000e): transmit queue 0 timed out May 23 00:01:24 mega2 kernel: Modules linked in: ipt_REDIRECT xt_conntrack iptable_mangle nf_conntrack_ftp ipt_LOG xt_limit xt_multiport iptable_nat nf_nat bnx2fc fcoe libfcoe 8021q garp stp llc libfc scsi_transport_fc scsi_tgt sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support ses enclosure sg ext4 mbcache jbd2 sd_mod crc_t10dif e1000e aacraid(U) dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio ipv6 cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi [last unloaded: scsi_wait_scan] May 23 00:01:24 mega2 kernel: Pid: 0, comm: swapper Not tainted 2.6.32-220.17.1.el6.x86_64 #1 May 23 00:01:24 mega2 kernel: Call Trace: May 23 00:01:24 mega2 kernel: <IRQ> [<ffffffff81069c97>] ? warn_slowpath_common+0x87/0xc0 May 23 00:01:24 mega2 kernel: [<ffffffff81069d86>] ? warn_slowpath_fmt+0x46/0x50 May 23 00:01:24 mega2 kernel: [<ffffffff8144ab2d>] ? dev_watchdog+0x26d/0x280 May 23 00:01:24 mega2 kernel: [<ffffffff8107d2b4>] ? mod_timer+0x144/0x220 May 23 00:01:24 mega2 kernel: [<ffffffff8144a8c0>] ? dev_watchdog+0x0/0x280 May 23 00:01:24 mega2 kernel: [<ffffffff8107cab7>] ? run_timer_softirq+0x197/0x340 May 23 00:01:24 mega2 kernel: [<ffffffff810a0dc0>] ? tick_sched_timer+0x0/0xc0 May 23 00:01:24 mega2 kernel: [<ffffffff8102aead>] ? lapic_next_event+0x1d/0x30 May 23 00:01:24 mega2 kernel: [<ffffffff81072291>] ? __do_softirq+0xc1/0x1d0 May 23 00:01:24 mega2 kernel: [<ffffffff810958b0>] ? hrtimer_interrupt+0x140/0x250 May 23 00:01:24 mega2 kernel: [<ffffffff8100c24c>] ? call_softirq+0x1c/0x30 May 23 00:01:24 mega2 kernel: [<ffffffff8100de85>] ? do_softirq+0x65/0xa0 May 23 00:01:24 mega2 kernel: [<ffffffff81072075>] ? irq_exit+0x85/0x90 May 23 00:01:24 mega2 kernel: [<ffffffff814f5450>] ? smp_apic_timer_interrupt+0x70/0x9b May 23 00:01:24 mega2 kernel: [<ffffffff8100bc13>] ? apic_timer_interrupt+0x13/0x20 May 23 00:01:24 mega2 kernel: <EOI> [<ffffffff812c4f9e>] ? intel_idle+0xde/0x170 May 23 00:01:24 mega2 kernel: [<ffffffff812c4f81>] ? intel_idle+0xc1/0x170 May 23 00:01:24 mega2 kernel: [<ffffffff813fa537>] ? cpuidle_idle_call+0xa7/0x140 May 23 00:01:24 mega2 kernel: [<ffffffff81009e06>] ? cpu_idle+0xb6/0x110 May 23 00:01:24 mega2 kernel: [<ffffffff814d479a>] ? rest_init+0x7a/0x80 May 23 00:01:24 mega2 kernel: [<ffffffff81c1ff7b>] ? start_kernel+0x424/0x430 May 23 00:01:24 mega2 kernel: [<ffffffff81c1f33a>] ? x86_64_start_reservations+0x125/0x129 May 23 00:01:24 mega2 kernel: [<ffffffff81c1f438>] ? x86_64_start_kernel+0xfa/0x109 May 23 00:01:24 mega2 kernel: ---[ end trace 142cbdb308188d13 ]--- May 23 00:01:24 mega2 kernel: e1000e 0000:04:00.0: eth0: Reset adapter ---//end first log with reset apapter//---> <--//second log with new driver//--- May 23 10:08:22 mega2 kernel: e1000e: Intel(R) PRO/1000 Network Driver - 1.11.3-NAPI May 23 10:08:22 mega2 kernel: e1000e: Copyright(c) 1999 - 2012 Intel Corporation. May 23 10:08:22 mega2 kernel: e1000e 0000:04:00.0: Disabling ASPM L0s May 23 10:08:22 mega2 kernel: e1000e 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 23 10:08:22 mega2 kernel: scsi 0:1:0:0: Direct-Access TOSHIBA MBF245LRC 6104 PQ: 1 ANSI: 5 May 23 10:08:22 mega2 kernel: scsi 0:1:1:0: Direct-Access TOSHIBA MBF245LRC 6104 PQ: 1 ANSI: 5 May 23 10:08:22 mega2 kernel: usb 1-1.2: new full speed USB device using ehci_hcd and address 3 May 23 10:08:22 mega2 kernel: Refined TSC clocksource calibration: 3092.973 MHz. May 23 10:08:22 mega2 kernel: Switching to clocksource tsc May 23 10:08:22 mega2 kernel: e1000e 0000:04:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:75:ad:38 May 23 10:08:22 mega2 kernel: e1000e 0000:04:00.0: eth0: Intel(R) PRO/1000 Network Connection May 23 10:08:22 mega2 kernel: e1000e 0000:04:00.0: eth0: MAC: 4, PHY: 8, PBA No: FFFFFF-0FF May 23 10:08:22 mega2 kernel: e1000e 0000:05:00.0: Disabling ASPM L0s May 23 10:08:22 mega2 kernel: e1000e 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 May 23 10:08:22 mega2 kernel: usb 1-1.2: New USB device found, idVendor=0557, idProduct=2221 May 23 10:08:22 mega2 kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 May 23 10:08:22 mega2 kernel: usb 1-1.2: Product: Hermon USB hidmouse Device May 23 10:08:22 mega2 kernel: usb 1-1.2: Manufacturer: Winbond Electronics Corp May 23 10:08:22 mega2 kernel: usb 1-1.2: configuration #1 chosen from 1 choice May 23 10:08:22 mega2 kernel: input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 May 23 10:08:22 mega2 kernel: generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input0 May 23 10:08:22 mega2 kernel: input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input5 May 23 10:08:22 mega2 kernel: generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input1 May 23 10:08:22 mega2 kernel: input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6 May 23 10:08:22 mega2 kernel: e1000e 0000:05:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:75:ad:39 May 23 10:08:22 mega2 kernel: e1000e 0000:05:00.0: eth1: Intel(R) PRO/1000 Network Connection May 23 10:08:22 mega2 kernel: e1000e 0000:05:00.0: eth1: MAC: 4, PHY: 8, PBA No: FFFFFF-0FF May 23 10:08:22 mega2 kernel: scsi: waiting for bus probes to complete ... May 23 10:08:22 mega2 kernel: scsi 0:3:0:0: Enclosure ADAPTEC Virtual SGPIO PQ: 0 ANSI: 5 May 23 10:08:22 mega2 kernel: sd 0:0:0:0: [sda] 878686208 512-byte logical blocks: (449 GB/418 GiB) May 23 10:08:22 mega2 kernel: sd 0:0:0:0: [sda] Write Protect is off May 23 10:08:22 mega2 kernel: sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA May 23 10:08:22 mega2 kernel: sda: sda1 sda2 May 23 10:08:22 mega2 kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk May 23 10:08:22 mega2 kernel: dracut: Scanning devices sda2 for LVM logical volumes vg_r378120301/lv_root vg_r378120301/lv_swap May 23 10:08:22 mega2 kernel: dracut: inactive '/dev/vg_r378120301/lv_root' [50.00 GiB] inherit May 23 10:08:22 mega2 kernel: dracut: inactive '/dev/vg_r378120301/lv_home' [358.70 GiB] inherit May 23 10:08:22 mega2 kernel: dracut: inactive '/dev/vg_r378120301/lv_swap' [9.80 GiB] inherit May 23 10:08:22 mega2 kernel: EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: May 23 10:08:22 mega2 kernel: dracut: Mounted root filesystem /dev/mapper/vg_r378120301-lv_root May 23 10:08:22 mega2 kernel: SELinux: Disabled at runtime. May 23 10:08:22 mega2 kernel: type=1404 audit(1337760494.977:2): selinux=0 auid=4294967295 ses=4294967295 May 23 10:08:22 mega2 kernel: dracut: May 23 10:08:22 mega2 kernel: dracut: Switching root May 23 10:08:22 mega2 kernel: udev: starting version 147 May 23 10:08:22 mega2 kernel: ses 0:3:0:0: Attached Enclosure device May 23 10:08:22 mega2 kernel: iTCO_vendor_support: vendor-support=0 May 23 10:08:22 mega2 kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 May 23 10:08:22 mega2 kernel: iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) May 23 10:08:22 mega2 kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) May 23 10:08:22 mega2 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 May 23 10:08:22 mega2 kernel: scsi 0:1:0:0: Attached scsi generic sg1 type 0 May 23 10:08:22 mega2 kernel: scsi 0:1:1:0: Attached scsi generic sg2 type 0 May 23 10:08:22 mega2 kernel: ses 0:3:0:0: Attached scsi generic sg3 type 13 May 23 10:08:22 mega2 kernel: i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 May 23 10:08:22 mega2 kernel: ACPI: I/O resource 0000:00:1f.3 [0x1180-0x119f] conflicts with ACPI region SMIO [0x1180-0x119f] May 23 10:08:22 mega2 kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver May 23 10:08:22 mega2 kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: May 23 10:08:22 mega2 kernel: EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: May 23 10:08:22 mega2 kernel: Adding 10272760k swap on /dev/mapper/vg_r378120301-lv_swap. Priority:-1 extents:1 across:10272760k May 23 10:08:22 mega2 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team May 23 10:08:22 mega2 kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max) May 23 10:08:22 mega2 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team May 23 10:08:22 mega2 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready May 23 10:08:22 mega2 kernel: e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None May 23 10:08:22 mega2 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready May 23 10:08:22 mega2 rpc.statd[1753]: Version 1.2.3 starting May 23 10:08:22 mega2 sm-notify[1754]: Version 1.2.3 starting May 23 10:08:22 mega2 kernel: RPC: Registered udp transport module. May 23 10:08:22 mega2 kernel: RPC: Registered tcp transport module. May 23 10:08:22 mega2 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module. May 23 10:08:22 mega2 lldpad: bound ctrl iface to /com/intel/lldpad May 23 10:08:22 mega2 kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb(a)candelatech.com> May 23 10:08:22 mega2 kernel: All bugs added by David S. Miller <davem(a)redhat.com> May 23 10:08:22 mega2 kernel: 8021q: adding VLAN 0 to HW filter on device eth0 May 23 10:08:22 mega2 kernel: bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.8 (Oct 02, 2011) ... ... ... May 23 10:32:26 mega2 kernel: ------------[ cut here ]------------ May 23 10:32:26 mega2 kernel: WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x26d/0x280() (Not tainted) May 23 10:32:26 mega2 kernel: Hardware name: X9SCL/X9SCM May 23 10:32:26 mega2 kernel: NETDEV WATCHDOG: eth0 (e1000e): transmit queue 0 timed out May 23 10:32:26 mega2 kernel: Modules linked in: ipt_REDIRECT xt_conntrack iptable_mangle nf_conntrack_ftp ipt_LOG xt_limit xt_multiport iptable_nat nf_nat bnx2fc fcoe 8021q libfcoe libfc garp stp llc scsi_transport_fc scsi_tgt sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables i2c_i801 i2c_core sg iTCO_wdt iTCO_vendor_support ses enclosure ext4 mbcache jbd2 sd_mod crc_t10dif e1000e(U) aacraid(U) dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio ipv6 cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi [last unloaded: scsi_wait_scan] May 23 10:32:26 mega2 kernel: Pid: 0, comm: swapper Not tainted 2.6.32-220.17.1.el6.x86_64 #1 May 23 10:32:26 mega2 kernel: Call Trace: May 23 10:32:26 mega2 kernel: <IRQ> [<ffffffff81069c97>] ? warn_slowpath_common+0x87/0xc0 May 23 10:32:26 mega2 kernel: [<ffffffff8101bf06>] ? intel_pmu_enable_all+0xa6/0x150 May 23 10:32:26 mega2 kernel: [<ffffffff81069d86>] ? warn_slowpath_fmt+0x46/0x50 May 23 10:32:26 mega2 kernel: [<ffffffff8144ab2d>] ? dev_watchdog+0x26d/0x280 May 23 10:32:26 mega2 kernel: [<ffffffff8144a8c0>] ? dev_watchdog+0x0/0x280 May 23 10:32:26 mega2 kernel: [<ffffffff8107cab7>] ? run_timer_softirq+0x197/0x340 May 23 10:32:26 mega2 kernel: [<ffffffff810a0dc0>] ? tick_sched_timer+0x0/0xc0 May 23 10:32:26 mega2 kernel: [<ffffffff8102aead>] ? lapic_next_event+0x1d/0x30 May 23 10:32:26 mega2 kernel: [<ffffffff81072291>] ? __do_softirq+0xc1/0x1d0 May 23 10:32:26 mega2 kernel: [<ffffffff810958b0>] ? hrtimer_interrupt+0x140/0x250 May 23 10:32:26 mega2 kernel: [<ffffffff8100c24c>] ? call_softirq+0x1c/0x30 May 23 10:32:26 mega2 kernel: [<ffffffff8100de85>] ? do_softirq+0x65/0xa0 May 23 10:32:26 mega2 kernel: [<ffffffff81072075>] ? irq_exit+0x85/0x90 May 23 10:32:26 mega2 kernel: [<ffffffff814f5450>] ? smp_apic_timer_interrupt+0x70/0x9b May 23 10:32:26 mega2 kernel: [<ffffffff8100bc13>] ? apic_timer_interrupt+0x13/0x20 May 23 10:32:26 mega2 kernel: <EOI> [<ffffffff812c4f9e>] ? intel_idle+0xde/0x170 May 23 10:32:26 mega2 kernel: [<ffffffff812c4f81>] ? intel_idle+0xc1/0x170 May 23 10:32:26 mega2 kernel: [<ffffffff813fa537>] ? cpuidle_idle_call+0xa7/0x140 May 23 10:32:26 mega2 kernel: [<ffffffff81009e06>] ? cpu_idle+0xb6/0x110 May 23 10:32:26 mega2 kernel: [<ffffffff814d479a>] ? rest_init+0x7a/0x80 May 23 10:32:26 mega2 kernel: [<ffffffff81c1ff7b>] ? start_kernel+0x424/0x430 May 23 10:32:26 mega2 kernel: [<ffffffff81c1f33a>] ? x86_64_start_reservations+0x125/0x129 May 23 10:32:26 mega2 kernel: [<ffffffff81c1f438>] ? x86_64_start_kernel+0xfa/0x109 May 23 10:32:26 mega2 kernel: ---[ end trace 9dfbc5721c4b2955 ]--- May 23 10:32:26 mega2 kernel: e1000e 0000:04:00.0: eth0: Reset adapter ---//end second log with the same error//---> I am unfortunately at a loss, what could the problem be? Thanks Sebastian

1 0

Centos 6 - vnc - authentication is required to set the network proxy used for downloading packages
by Frank Cox 23 May '12

23 May '12

A window keeps popping up on my remote desktop stating "authentication is required to set the network proxy used for downloading packages. An application is attempting to perform an action that requires privileges. Authentication as the super user is required to perform this action" and asking for the root password. If I hit cancel it comes back several minutes later. I've found several references to this issue doing various google searches, but nothing that clearly states a solution. How can I get rid of this? -- MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com www.creekfm.com - FIFTY THOUSAND WATTS of POW WOW POWER!

2 4

CentOS in the world
by Muhammad A. Fatahna 23 May '12

23 May '12

Hi all, Now, i still analyse about CentOS user, how to know the amount of centos users around the world that can be get a result CentOS percentage of all distributions. thank you very much -- http://mafatahna.web.id @mafatahna

3 4

Secure VNC access from iPad
by david 23 May '12

23 May '12

Dear Gurus If any of you have been successful in using an iPad as a VNC client with SSH tunnelling, I'd love to know how it's done. I have tried using the iSSH application, but without success. I know that the server is accessible from a Windows client (using TigerVNC), via an SSH tunnel, so the server is properly configured. If you have a working example, please let me know what magic sauce you used. Thanks David

3 2

Centos 6 - tigervnc - numbers on keypad
by Frank Cox 23 May '12

23 May '12

I have a ncurses-based program that runs on a vnc desktop on a remote computer. On Centos 5 you could enter numbers into the program using the numeric keypad. I just installed a new machine running Centos 6 to do this same job and now numbers can only be entered using the numbers across the top of the keyboard. The program still recognizes the keys on the keypad when numlock is not set (so you get home, pgup, left and right cursor, etc.) but I get nothing when I set the numlock key. Having said that, I do see activity when I set numlock and run the xev program, so the keypresses are obviously getting through. How can I make this thing accept numbers from the numeric keypad on Centos 6? Do I have to re-write the ncurses program to recognize some different keycodes? -- MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com www.creekfm.com - FIFTY THOUSAND WATTS of POW WOW POWER!

1 0

Centos 6 - Networking: Some Queries
by Sanjay Arora 23 May '12

23 May '12

Hello all I am setting up a Centos 6 machine with one network card & one onboard network port. Both are recognized & work. Onboard Network port is unused yet, but is required for dedicated access to LTSP LAN, which would allow older PIII machines to boot from this system. I have installed LTSP but again Networking seems to be the problem area, as the clients won't boot from this machine. Have muddled & tinkered with Networking a bit...deleted & reconfigured the ifcfg files again & again but as I don't understand NetworkManager and Google is not helping get relevant results, so I have brought the system to minimum working condition, where one network card is providing LAN access on which Internet Router is configured. And now I am posting my system's condition below as output of various commands. My network-scripts directory: [root@swyam network-scripts]# ls ifcfg-Internet_GW ifup-eth ifcfg-lo ifup-ippp ifdown ifup-ipv6 ifdown-bnep ifup-isdn ifdown-eth ifup-plip ifdown-ippp ifup-plusb ifdown-ipv6 ifup-post ifdown-isdn ifup-ppp ifdown-post ifup-routes ifdown-ppp ifup-sit ifdown-routes ifup-tunnel ifdown-sit ifup-wireless ifdown-tunnel init.ipv6-global ifup net.hotplug ifup-aliases network-functions ifup-bnep network-functions-ipv6 Ifconfig output: [root@swyam network-scripts]# ifconfig eth0 Link encap:Ethernet HWaddr E0:69:95:77:A7:F3 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:20 Memory:fe600000-fe620000 eth1 Link encap:Ethernet HWaddr 00:60:52:0C:0B:DE inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2245698 errors:0 dropped:0 overruns:0 frame:0 TX packets:1785431 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3105161344 (2.8 GiB) TX bytes:148843277 (141.9 MiB) Interrupt:16 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:525 errors:0 dropped:0 overruns:0 frame:0 TX packets:525 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:53459 (52.2 KiB) TX bytes:53459 (52.2 KiB) [root@swyam network-scripts]# cat ifcfg-Internet_GW TYPE=Ethernet BOOTPROTO=none IPADDR=192.168.1.3 PREFIX=24 GATEWAY=192.168.1.1 DNS1=218.248.245.1 DNS2=8.8.8.8 DOMAIN="218.248.245.1 8.8.8.8 8.8.4.4" DEFROUTE=yes IPV4_FAILURE_FATAL=yes IPV6INIT=no NAME="Internet GW" UUID=d4535709-a05b-459d-a4fd-f08ec9460bcc ONBOOT=yes DNS3=8.8.4.4 Network Manager is running and the above card "Internet_GW" was configured through the NetworkManager applet. Internet works. One can disconnect Internet through the NetworkManager applet. Yet the applet's Edit Connection --> Wired --> Last Used status shows "Never". Now let's come to what I want to do with this machine....The Onboard network port for LTSP services....Network card on network 192.168.1.0/24(192.168.1.1 is the ISP ADSL router) to provide LAN access & Internet access. Now what I want to do is to create a third network for my virtual machines (KVM) say 172.16.1.1/24. Now create some sort of dummy bridge and get these machines talking to the Internet....said bridge to either forward the packets through the normal Internet path or somehow use NAT to do it. I think this should be doable but haven't come across any example or any tutorial for this. Now comes why I want a separate network....why not use 192.168.1.0/24...problem is...I don't want to disable Network Manager by putting Managed=NO in my ifcfg file. As with Network Manager enabled, I can use USB devices whenever my ISP goes down....and I'm afraid it happens more frequently than I care to bear. I frankly also don't understand how Network Manager works....in a broad manner....literature I found was either too technical or too old or was focussed on a particular problem. I would like to know a network/bridge/device topology that can solve my issue....three networks...lan. ltsp, virtual machines, all having access to each other & the net, while keeping the option of using networkmanager or any other tool (I'm open) to plugin any other wireless internet access device. I am not very advanced admin, but can follow instructions. Kindly help. With regards & thanks. Sanjay.

3 3

Apache error
by Luigi Rosa 22 May '12

22 May '12

I have a VMware virtual machine with CentOS 6 32bit updated to the lates patches Yesterday Apache started to give this error: [Tue May 22 09:46:07 2012] [error] (38)Function not implemented: apr_socket_accept: (client socket) [Tue May 22 09:46:08 2012] [error] (38)Function not implemented: apr_socket_accept: (client socket) [Tue May 22 09:46:09 2012] [error] (38)Function not implemented: apr_socket_accept: (client socket) [Tue May 22 09:46:09 2012] [error] (38)Function not implemented: apr_socket_accept: (client socket) [Tue May 22 09:46:09 2012] [error] (38)Function not implemented: apr_socket_accept: (client socket) [Tue May 22 09:46:09 2012] [error] (38)Function not implemented: apr_socket_accept: (client socket) [Tue May 22 09:46:09 2012] [error] (38)Function not implemented: apr_socket_accept: (client socket) [Tue May 22 09:46:09 2012] [error] (38)Function not implemented: apr_socket_accept: (client socket) [Tue May 22 09:46:09 2012] [error] (38)Function not implemented: apr_socket_accept: (client socket) [Tue May 22 09:46:09 2012] [error] (38)Function not implemented: apr_socket_accept: (client socket) Any suggestion about this? Ciao, luigi -- / +--[Luigi Rosa]-- \ An idealist is one who, on noticing that roses smell better than a cabbage, concludes that it will also make better soup.

7 17

Error in Squirrelmail
by Edson - PMSS 22 May '12

22 May '12

Yesterday I upgrade my CentOS e-mail server and I changed the version of Squirrelmail and PHP. Now, after the changes, I can't send e-mail by squirrelmail. I can send only by e-mail clients like Thunderbird and Outlook in the network. I did a backup of the old configuration and data files and I replaced it on the new configuration, but nothing happen. I need someone's help. Thank you. Edson

2 2

CentOS-announce Digest, Vol 87, Issue 12
by centos-announce-request＠centos.org 22 May '12

22 May '12

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2012:0677 Moderate CentOS 5 postgresql Update (Johnny Hughes) 2. CESA-2012:0678 Moderate CentOS 5 postgresql84 Update (Johnny Hughes) 3. CESA-2012:0676 Moderate CentOS 5 kvm Update (Johnny Hughes) 4. CESA-2012:0678 Moderate CentOS 6 postgresql Update (Johnny Hughes) 5. CEBA-2012:0684 CentOS 5 ipa-client Update (Johnny Hughes) 6. CESA-2012:0683 Important CentOS 6 bind-dyndb-ldap Update (Johnny Hughes) 7. CEBA-2012:0686 CentOS 6 gnome-power-manager Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 21 May 2012 16:39:19 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:0677 Moderate CentOS 5 postgresql Update To: centos-announce(a)centos.org Message-ID: <20120521163919.GA19306(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:0677 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2012-0677.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: f9e276c942b735df8aaa8f64f17a141d718a9804bff7773f1ff06a07fd47db83 postgresql-8.1.23-4.el5_8.i386.rpm c3a4e0955658e0c632b3fb0b3e85a9992e15a897d92e8eca6f3c777201a6b4df postgresql-contrib-8.1.23-4.el5_8.i386.rpm 00d92787a9c7de634e45cdf1822b3a9cf8913b2084ce13581ee5b23a2a06b577 postgresql-devel-8.1.23-4.el5_8.i386.rpm f4e273491ee6627d5057071481e6ec0e928b11fcb9fef278bbc98bdd04d7b6c4 postgresql-docs-8.1.23-4.el5_8.i386.rpm 0bd5d29aba396fca05372358453672816f730ab01b5f03c6a8b30ddaedfb22a7 postgresql-libs-8.1.23-4.el5_8.i386.rpm 37a059f6214a5c541c9714cdbde33100b7407edfd3d674af20c373468297d665 postgresql-pl-8.1.23-4.el5_8.i386.rpm 805ad49d0d49f53984bba1dd0065fd354f0cdd50c06ccbdad0234e20658767f5 postgresql-python-8.1.23-4.el5_8.i386.rpm d6fa4da806c0dba29c50742e1ce816f77dd092791ecfa0af9c3aeb8371b5ba00 postgresql-server-8.1.23-4.el5_8.i386.rpm 00235559b90095c8374f6b11e40615331050d3f881d9c071240f974e03611ea6 postgresql-tcl-8.1.23-4.el5_8.i386.rpm c5dd661f2503a79dc2ed8e002fc462851ca6ca2c1b4c0cc9dbac8bca723c816f postgresql-test-8.1.23-4.el5_8.i386.rpm x86_64: 44551ba6bef3bb32f129aabf8b30b5b1a8f5e97532741753be994aab0d2ec4dd postgresql-8.1.23-4.el5_8.x86_64.rpm 0aecec19127f3552e7ce2f3952913d1313e601047cf595c1e7beeaf83ba289fc postgresql-contrib-8.1.23-4.el5_8.x86_64.rpm 00d92787a9c7de634e45cdf1822b3a9cf8913b2084ce13581ee5b23a2a06b577 postgresql-devel-8.1.23-4.el5_8.i386.rpm 9fcfc89dc721d947879dddbe9a0d45c4820494695ebe25fa696aeef2a74f8ee6 postgresql-devel-8.1.23-4.el5_8.x86_64.rpm d016311279608f102e451e1018349b1b2fbf1e9ef406496f47e465139972f50b postgresql-docs-8.1.23-4.el5_8.x86_64.rpm 0bd5d29aba396fca05372358453672816f730ab01b5f03c6a8b30ddaedfb22a7 postgresql-libs-8.1.23-4.el5_8.i386.rpm c01f4c5d6d06aa2184e6c88171acdaf414f5e0d6af8fd6555cb0d0529eccf381 postgresql-libs-8.1.23-4.el5_8.x86_64.rpm 87aa73348e1081cc0c4177baf824584ca1a1ffcd8f5fc663ab59f3ba1a1ae138 postgresql-pl-8.1.23-4.el5_8.x86_64.rpm b03eaec63f92c8533a05d90b45102cc47fdadcff3b6a0b7f5e3aad6e47158c9c postgresql-python-8.1.23-4.el5_8.x86_64.rpm 0a9cfa5fe55a74078257ecb6db8227062884f8d966dded93b8e606504462e788 postgresql-server-8.1.23-4.el5_8.x86_64.rpm b0a2dabc127be160ad32950118dfc598aeec406ffeac7d1ba228beee0f39d843 postgresql-tcl-8.1.23-4.el5_8.x86_64.rpm 3c73ff8898bf449d8bad68edd87c647cb5918c51eb5fff7c6837a1329b906fd4 postgresql-test-8.1.23-4.el5_8.x86_64.rpm Source: c16d2a9298ed52cbb8bc0b84fcdefa98a02f9854adbf8feef7830e24d4b0575a postgresql-8.1.23-4.el5_8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 21 May 2012 16:41:51 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:0678 Moderate CentOS 5 postgresql84 Update To: centos-announce(a)centos.org Message-ID: <20120521164151.GA19517(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:0678 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2012-0678.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 8abb3bab3559e3f42e1f85ffbc0bb809e582035c569f458c0a9b848bb64f87fe postgresql84-8.4.11-1.el5_8.i386.rpm 83c207fcac0b1ce8b42698ccf0881c99cfed435c423822369bffda4ba74d5c05 postgresql84-contrib-8.4.11-1.el5_8.i386.rpm 42249c01ae6cf19eb18da8008b5d0db1fcbe735fa58e2937a1ee0efb88f2915a postgresql84-devel-8.4.11-1.el5_8.i386.rpm c8c2228e2d8ea41be661f29065f0a3af7627f63b4314bb94ba9d1d1e02ddbb84 postgresql84-docs-8.4.11-1.el5_8.i386.rpm 3d296cf4a88a86fb8a4f58e634ab473dc2a8d0a019007f7f0058c7f2d33d6820 postgresql84-libs-8.4.11-1.el5_8.i386.rpm 90bb183a7ef0d10a5483ee6b137927ba33ff88d7811ac4511343270425d84372 postgresql84-plperl-8.4.11-1.el5_8.i386.rpm f6db9b1bd7ae1be6451624b6ee4ea6de9a2e86fbfbcd6601f753351294261406 postgresql84-plpython-8.4.11-1.el5_8.i386.rpm 526332f28787dadf3000c1ab09600881a6495b460bc2f743641c0bd2fa80bef6 postgresql84-pltcl-8.4.11-1.el5_8.i386.rpm 6aca09b885b2ad65e9b1683983c9ddbf23c309bbb4b2bb1f0579d5396856297c postgresql84-python-8.4.11-1.el5_8.i386.rpm 3a97d9723c3f206098efdb906a1fb7e62468b06ed64558ee119d9616d46ec13e postgresql84-server-8.4.11-1.el5_8.i386.rpm 9e4752564d0ab270d035f10a92a7ea6cdfc9d8fa4a9d22ea74ac2d3a4aa3fd7e postgresql84-tcl-8.4.11-1.el5_8.i386.rpm ccad7cbe50a53077b342a60d144d6699fb8a3b1b41b55cf41f93c6dd7c36cb36 postgresql84-test-8.4.11-1.el5_8.i386.rpm x86_64: 500e46b654ba7753fabc889955aa48e1b9439761cd030013b00919bd30b120fb postgresql84-8.4.11-1.el5_8.x86_64.rpm 5dfdc5335ae2c890881f4f85bfa1c9324c6df2a19a5f5163fd65e697b57650de postgresql84-contrib-8.4.11-1.el5_8.x86_64.rpm 42249c01ae6cf19eb18da8008b5d0db1fcbe735fa58e2937a1ee0efb88f2915a postgresql84-devel-8.4.11-1.el5_8.i386.rpm e73e15cc41bd77b74ccd56a7dc30827012a135cd65ee1828c964c977e329e0ec postgresql84-devel-8.4.11-1.el5_8.x86_64.rpm 36b6b381f05f332f3ff876178938658a89f2db4f275b83ec9f26cbe0e3b36fad postgresql84-docs-8.4.11-1.el5_8.x86_64.rpm 3d296cf4a88a86fb8a4f58e634ab473dc2a8d0a019007f7f0058c7f2d33d6820 postgresql84-libs-8.4.11-1.el5_8.i386.rpm b7bfc4008181d910ea382d9aea5cbe82ab8bd991b3c9f31b2226ad49d31d4913 postgresql84-libs-8.4.11-1.el5_8.x86_64.rpm cb0a9c7f68dc8dae12ac6e40541792acfbcefb11aabb0804f55d3304d4c713cf postgresql84-plperl-8.4.11-1.el5_8.x86_64.rpm 95b626e8268e45fe4109f36836f339d1314a6148f1108d86d93319b795d27a2a postgresql84-plpython-8.4.11-1.el5_8.x86_64.rpm 02ac4b3d6bc6681ee661f3d59350c2839366aadc179db456e4c0782a2e98822b postgresql84-pltcl-8.4.11-1.el5_8.x86_64.rpm 746acbf7c495a78abb980dc37302cda9e54a680c04d35c73ec65b4503e7c21e7 postgresql84-python-8.4.11-1.el5_8.x86_64.rpm 07b53de3f60bc3f69717f4b89ca5f68c41c0610e19061c55b747c33ab6d85034 postgresql84-server-8.4.11-1.el5_8.x86_64.rpm 3b17d76640ad3b46e483c72bf852f6f7cb03a705c6d5ca24d5c7e6184277f1eb postgresql84-tcl-8.4.11-1.el5_8.x86_64.rpm 4b26e4074ec30566f2db13fb64bdc6ff4a83558b0d9d900bfba440e24bb2699e postgresql84-test-8.4.11-1.el5_8.x86_64.rpm Source: 08b4e204de306927f9a5dcca328d525c5e28a9369e06272b503ac789359051a0 postgresql84-8.4.11-1.el5_8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Mon, 21 May 2012 16:43:32 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:0676 Moderate CentOS 5 kvm Update To: centos-announce(a)centos.org Message-ID: <20120521164332.GA19667(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:0676 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2012-0676.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: e22b1a89f4a8ca1a3546a02a37b18ad4370c4b58875f0d2dce21ab66db87015c kmod-kvm-83-249.el5.centos.4.x86_64.rpm 9b44d033b33c2ac6d8404341d07487320d9851af57bb19fb86d501b596c4dd43 kmod-kvm-debug-83-249.el5.centos.4.x86_64.rpm cb0312811c382f7e52e96449c145ccc9a130c993148ecca43c8c661b23795ca3 kvm-83-249.el5.centos.4.x86_64.rpm 5fcc62a914836a862f1c9ba3346b9734aba674cca61d1eb0fa571ce687e206a4 kvm-qemu-img-83-249.el5.centos.4.x86_64.rpm 42a3ed0b687342e8ed5240f547e712fd4a5f250a0e9834195bebc7509e7ca557 kvm-tools-83-249.el5.centos.4.x86_64.rpm Source: c1c895a63971079e9496fe4134bf6e8e2963dac9a20ed02a16f1cb1df6c1a995 kvm-83-249.el5.centos.4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Mon, 21 May 2012 21:24:46 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:0678 Moderate CentOS 6 postgresql Update To: centos-announce(a)centos.org Message-ID: <20120521212446.GA889(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:0678 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2012-0678.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 84ec4f5147f1794dedf496cb3be490a0ded24073018e92cd3a4c931a7d9598dc postgresql-8.4.11-1.el6_2.i686.rpm 89734dd986e1034152894cda4bdf04c749119a16a02832523d5a090307ca252a postgresql-contrib-8.4.11-1.el6_2.i686.rpm 88413cb4bddde1936f63856a82be7a53de34e631e17345566911ca7afb863251 postgresql-devel-8.4.11-1.el6_2.i686.rpm 1b884f3abc6605bf2025f2067bec39c31a0cacacc16dc0d966d76f3aaeb1c620 postgresql-docs-8.4.11-1.el6_2.i686.rpm 13b2901269df3ee359251cefacbe0bcace57f864d50c1baa5b0e424a4673b461 postgresql-libs-8.4.11-1.el6_2.i686.rpm 7cc5947da57702c0b4c3e73fa22396b7e12a12fb4b8a2477bf6670e4288cda3a postgresql-plperl-8.4.11-1.el6_2.i686.rpm aa86384959a48961fd501cda81decf2cf976137160a314119c2ec2595696b6ae postgresql-plpython-8.4.11-1.el6_2.i686.rpm 8fdceea801228c3d31b3e2985532de498cf657a4cd4ae68815085d93e650a064 postgresql-pltcl-8.4.11-1.el6_2.i686.rpm 0622f5213344c45877889c832ba3111c31347488e4664c6d858add0b57d01977 postgresql-server-8.4.11-1.el6_2.i686.rpm 286d911fda4d2e94cb6d8a4521a83b0e837c73345cc615b9e6ea7380741eb089 postgresql-test-8.4.11-1.el6_2.i686.rpm x86_64: 84ec4f5147f1794dedf496cb3be490a0ded24073018e92cd3a4c931a7d9598dc postgresql-8.4.11-1.el6_2.i686.rpm a96253bf764b2057cc323104b566c771515f44bf1299106fbcb08da7118e5693 postgresql-8.4.11-1.el6_2.x86_64.rpm f7fb62a9cf0279c60685097a8194ded94b899b7c9e0a20c5a931ada9fe37614f postgresql-contrib-8.4.11-1.el6_2.x86_64.rpm 88413cb4bddde1936f63856a82be7a53de34e631e17345566911ca7afb863251 postgresql-devel-8.4.11-1.el6_2.i686.rpm ca10ecc2037a9fcb51d15d034b038224d630dca0c21136c0d11fa2ea26d41c39 postgresql-devel-8.4.11-1.el6_2.x86_64.rpm 5f45840308a4a025d2aa713bf84911fb5a54926083179391d987f3399e6a9dd2 postgresql-docs-8.4.11-1.el6_2.x86_64.rpm 13b2901269df3ee359251cefacbe0bcace57f864d50c1baa5b0e424a4673b461 postgresql-libs-8.4.11-1.el6_2.i686.rpm bf31aecd652f3f7ae2ee08970d01f3d6edf09be5a3bc8a03a2783c70d149bd61 postgresql-libs-8.4.11-1.el6_2.x86_64.rpm 5dd9c2f77df7684ab88fd684bd4d630647c536a999046ba4801c6e3cbfb7b3be postgresql-plperl-8.4.11-1.el6_2.x86_64.rpm 8efdc41bd5431bf676e9d8204162fc8c28a2cd58b5b3efdd7d668848fac5cacc postgresql-plpython-8.4.11-1.el6_2.x86_64.rpm 78d06ac42b581899a9abb8c600ecaa2f2afdb44d3ea5905b7a372920fcb32266 postgresql-pltcl-8.4.11-1.el6_2.x86_64.rpm 9f30336bff78813a74a99da35a658129ca3ba927bd91e02d260e1a7ba741bafe postgresql-server-8.4.11-1.el6_2.x86_64.rpm ef6e413c743edbfa02f7ee7d616cc5149aa910b3aa684336c750a349e217e1a9 postgresql-test-8.4.11-1.el6_2.x86_64.rpm Source: b82c20acb2fa0e5742bc2f956bd033ebc496f84e678faacda57aa7a8e5f8d4af postgresql-8.4.11-1.el6_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Mon, 21 May 2012 21:34:36 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0684 CentOS 5 ipa-client Update To: centos-announce(a)centos.org Message-ID: <20120521213436.GA2383(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0684 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0684.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 34557f7f27c27b9bc75920bacd6ff6d5783add23fa837a4a2b0d9954e5b8abad ipa-client-2.1.3-2.el5_8.i386.rpm x86_64: 195d336b38f590a310b5be29a026085155f0fd7fb237e803149e6c65e2410594 ipa-client-2.1.3-2.el5_8.x86_64.rpm Source: 0a6f13e4141eaa818182bf93ba9a133cc547b62768329024b3a42aa48e15d4a5 ipa-client-2.1.3-2.el5_8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Mon, 21 May 2012 22:49:33 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:0683 Important CentOS 6 bind-dyndb-ldap Update To: centos-announce(a)centos.org Message-ID: <20120521224933.GA5546(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:0683 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2012-0683.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 73af3f65df2182510d95b85508b1e31c6b139193c46b7855fc3aee287bc1a8ee bind-dyndb-ldap-0.2.0-7.el6_2.1.i686.rpm x86_64: ad9317fc73bc81ee30807344d03da73f017c73238aa2ed2e6c99f302a742d42f bind-dyndb-ldap-0.2.0-7.el6_2.1.x86_64.rpm Source: a0871334275fff81228924d12ab60abf8934c79c05afe939d50bd636352258b1 bind-dyndb-ldap-0.2.0-7.el6_2.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 7 Date: Tue, 22 May 2012 13:27:52 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0686 CentOS 6 gnome-power-manager Update To: centos-announce(a)centos.org Message-ID: <20120522132752.GA15651(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0686 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0686.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: c002dad7305a7334a7587a7129cec40b8b938766154ad50d07f52fa276219c86 gnome-power-manager-2.28.3-6.el6_2.i686.rpm 883acb1a1c1276d95e05e042543cbdc6d31c797062dbedec8460a382fdde98f0 gnome-power-manager-extra-2.28.3-6.el6_2.i686.rpm x86_64: 6858b93cdf28663495ddff786d438429ed2329b519235b8fcc5d408271667cde gnome-power-manager-2.28.3-6.el6_2.x86_64.rpm eb19ae429fe70b78b719dcd91bb62112999cc00b62dba54d8d8a90332628436d gnome-power-manager-extra-2.28.3-6.el6_2.x86_64.rpm Source: c1e06274ea833535b2bd9b53301e797fb9ca556111d6f3d48647d165e6c238ee gnome-power-manager-2.28.3-6.el6_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 87, Issue 12 ***********************************************

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss