Discuss

discuss@lists.centos.org

34758 discussions

Anyone already tried to backport the latest ASPM kernel patch to 6.2?
by Michael Lampe 13 Feb '12

13 Feb '12

After going from CentOS 5.7 to 6.2, a lot of things turned out to be much better, but there are also quite some regressions. The most obvious one is power consumption on my notebook. It was notably lower before. The ASPM issue introduced in 2.6.38 was widely reported and discussed, and the 6.2 kernel has exacatly this code as a backport. http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdi… So I started to experiment with the upstream patch: http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=commitd… To make it apply, one needs to change 'pci_is_pcie(pdev)' into 'pdev->is_pcie'. One also needs to fiddle a little with the first chunk. I came up with the patch attached, but unfortunately the new kernel showed no improvement. Most probably I got something wrong. Anyone else here who tried this or is interested in sorting this out? Thanks, Michael

3 6

Adding Mandarin support - pointers?
by m.roth＠5-cent.us 13 Feb '12

13 Feb '12

I've had a request from one of my users to add Mandarin support. A few quick googles gets me nothing, nor looking for "adding language support". Anyone have a pointer to info on adding whatever packages/group packages I need? Thanks in advance. mark

4 4

Perl Libraries
by Matt 12 Feb '12

12 Feb '12

Having troubles with perl libraries. Does everyone use yum to install perl modules on CentOS 5.x? I have installed the rpmforge repository. I am having terrible luck with installing libraries though. Needed Mechanize for one script but had all sorts of conflicts. Ended up installing mechanize manually from rpm and adding it to yum exclude. Right now I am trying to get Net::SSH::Perl installed and run this script: http://www.perlhowto.com/execute_commands_on_remote_machines_using_ssh Would think it would be as simple as 'yum install perl-Net-OpenSSH' but it does not work. It installs but perl complains when using it. Is it better to use CPAN instead of yum? For those doing a good deal of perl scripting what are you using to manage libraries? Any pointers would be great.

5 10

Can I get rid of i86 packages and libraries on an x86_64 virtual server?
by John J. Boyer 12 Feb '12

12 Feb '12

The server is a vpn with only 20 GB of storage. I would like to free up disk space. Even if I must keep some i86 stuff, I think I can get rid of the dev packages for it. Thanks, John -- John J. Boyer; President, Chief Software Developer Abilitiessoft, Inc. http://www.abilitiessoft.com Madison, Wisconsin USA Developing software for people with disabilities

3 2

Key auth question
by Jussi Hirvi 12 Feb '12

12 Feb '12

I have a problem getting key authentication to work with one remote user (git), even though it works fine for the remote user "root". The remote file .ssh/authorized_keys is identical for both users - I cp'ed it from the root account to the git home dir. On local machine (OS X, by the way) I have: $ cd $ ls -l .ssh -rw------- 1 jussihirvi staff 668 Aug 24 16:13 id_rsa (the rest is omitted) On remote machine (as root): $ cd $ ls -ld .ssh drwxr-xr-x 2 root root 4096 Feb 11 17:45 .ssh $ ls -l .ssh total 8 -rw------- 1 root root 1768 Feb 11 17:45 authorized_keys -rw-r--r-- 1 root root 631 Feb 11 12:30 known_hosts On remote machine (as git): $ cd $ ls -ld .ssh drwxr-xr-x 2 git git 4096 Feb 12 11:15 .ssh $ ls -l .ssh total 8 -rw------- 1 git git 1768 Feb 12 10:52 authorized_keys -rw-r--r-- 1 git git 631 Feb 12 11:05 known_hosts When, on local machine, I do: $ ssh root@remotehost I get in without a password. But when I do $ ssh git@remotehost I will be asked for a password. What should I check? - Jussi -- Jussi Hirvi * Green Spot Suvilahdenkatu 1 B 78 * 00500 Helsinki * Finland Tel. +358 9 493 981 * Mobile +358 40 771 2098 (only sms) jussi.hirvi(a)greenspot.fi * http://www.greenspot.fi

3 2

Key auth question
by Jussi Hirvi 12 Feb '12

12 Feb '12

1 0

Startech USB21000S
by Phil Savoie 12 Feb '12

12 Feb '12

Hi All, Just wondering if anyone has had the occasion to use one of these for usb networking with Centos 6.2. Did it work out of the box? Any recommendations? It uses the ax88178 chipset and is a gigabit usb network adaptor. Thanks a bunch, in advance for your time. Phil

4 5

python26-memcached on centOS 5.5
by Anand Jeyahar 12 Feb '12

12 Feb '12

Hi, Is anyone here running memcached + python2.6 + django setup on a CentOS 5.5?? Am trying to set one up here and have trouble with the python26-memcached installation. So far i have installed (via yum): 1.python26 2. python26-memcached 3. libevent 4. memcached-devel Now when i try to run `import memcache` from the python2.6 shell i get an ImportError: No module named memcache. The python26 installation picks up other modules(django etc..) fine. So there's no configuration problem from python26 interpreter. I am not able to figure out the problem. Any ideas/suggestions? Is building from source my only way out?? Thanks and Regards ______________________________________________________________________________________- Thanks and Regards Anand Jeyahar Senior Systems Analyst, CSSCorp Pvt. Ltd., Mob: +91 80561 33088 Extn: 7101080 Please NOTE: This electronic message, including any attachments, may include privileged, confidential and/or inside information owned by Demand Media, Inc. Any distribution or use of this communication by anyone other than the intended recipient(s) is strictly prohibited and may be unlawful. If you are not the intended recipient, please notify the sender by replying to this message and then delete it from your system. Thank you.

2 2

TLS support on postfix
by Kumar Krishna 11 Feb '12

11 Feb '12

Hi List, I have a postfix server based on CentOS 5 in which I have been trying to add TLS encryption support for SMTP. From the localhost when I do an EHLO, following is the output [root@xxxxxxx ~]# nc localhost 25 220 xxxxxxx.xxxx.xxx.xx ESMTP Postfix EHLO localhost 250-xxxxxxx.xxxx.xxx.xx 250-PIPELINING 250-SIZE 41943040 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH PLAIN LOGIN 250-AUTH=PLAIN LOGIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN However from a remote location when I do the EHLO, the response does not contains STARTTLS, ENHANCEDSTATUSCODES and DSN krishna@L03:~$ nc xxxxxxx.xxxx.xxx.xx 25 220 xxxxxxx.xxxx.xxx.xx ESMTP Postfix EHLO localhost 250-xxxxxxx.xxxx.xxx.xx 250-PIPELINING 250-SIZE 41943040 250-VRFY 250-ETRN 250-AUTH PLAIN LOGIN 250 8BITMIME I have done some googling and found this might be because of the Cisco Router's "ESMTP Fix". However Can someone here tell me if there are any settings in master.cf or main.cf that might result in similar behaviour? Regards, KRiSHNA

3 8

Terminal settings with Putty?
by Lists 11 Feb '12

11 Feb '12

Trying to use Putty 0.62 (the most current version I can find) and when I use the c compiler, I see a bunch of terminal codes that obfuscate the output of the compiler. (Teaching my son some programming) Anybody know what I should be setting to what? It's pretty much a CentOS6 server set up with defaults. You can see what I'm talking about http://i.imgur.com/dpwLg.png Thanks in advance... -Ben

2 2

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss