Discuss

discuss@lists.centos.org

34758 discussions

sox: Failed reading obd-demo.mp3: Do not understand format type: mp3
by Kaushal Shriyan 13 Sep '11

13 Sep '11

Hi, Can someone please comment about the below issue [root@host0040 kaushal]# file obd-demo.mp3 obd-demo.mp3: MPEG ADTS, layer III, v1, 256 kBits, 44.1 kHz, Monaural [root@host0040 kaushal]# sox obd-demo.mp3 -e stat sox: Failed reading obd-demo.mp3: Do not understand format type: mp3 [root@host0040 kaushal]# sox -V obd-demo.mp3 -r 8000 -c 1 -t ul -w vm-intro.ulaw sox: Failed reading obd-demo.mp3: Do not understand format type: mp3 [root@host0040 kaushal]# sox -v 0.125 -V <obd-demo.mp3> -t au -r 8000 -U -b -c 1 <obd-demo.ulaw> resample -ql -bash: obd-demo.ulaw: No such file or directory [root@host0040 kaushal]# sox -V obd-demo.mp3 -t au -r 8000 -U -b -c 1 obd-demo.ulaw resample -ql sox: Failed reading obd-demo.mp3: Do not understand foReply rmat type: mp3 [root@host0040 kaushal]# When i invoke the same obd-demo.mp3 it works perfectly fine host0040*CLI> channel originate DAHDI/g0/xxxxxxxxxx Application MP3Player /home/kaushal/obd-demo.mp3 [Sep 9 16:44:56] DEBUG[12691]: sig_pri.c:985 sig_pri_request: sig_pri_request 1 [Sep 9 16:44:56] DEBUG[12691]: sig_pri.c:6427 sig_pri_call: CALLER NAME: NUM: -- Requested transfer capability: 0x00 - SPEECH -- Launching MP3Player(/home/kaushal/obd-demo.mp3) on DAHDI/i1/9833754756-1 [root@host0040 ~]# rpm -qa | grep sox sox-12.18.1-1.el5_5.1 [root@host0040 ~]# rpm -qa | grep lame lame-3.98.4-1.el5.rf lame-devel-3.98.4-1.el5.rf [root@host0040 ~]# MP3 support in SoX is optional and requires access to either or both the external libmad and libmp3lame libraries. To see if there is support for Mp3 run sox -h and look for it under the list of supported file formats as "mp3". [root@host0040 ~]# sox -h sox: Version 12.18.1 Usage: [ gopts ] [ fopts ] ifile [ fopts ] ofile [ effect [ effopts ] ] gopts: -e -h -p -q -S -V fopts: -r rate -c channels -s/-u/-U/-A/-a/-i/-g/-f -b/-w/-l/-d -v volume -x effect: avg band bandpass bandreject chorus compand copy dcshift deemph earwax echo echos fade filter flanger highp highpass lowp lowpass mask mcompand noiseprof noisered pan phaser pick pitch polyphase rate repeat resample reverb reverse silence speed stat stretch swap synth trim vibro vol effopts: depends on effect Supported file formats: aiff al alsa au auto avr cdr cvs dat vms gsm hcom la lu maud nul ossdsp prc raw sb sf sl smp sndt sph 8svx sw txw ub ul uw voc vorbis vox wav wve Which package contains libmad and libmp3lame libraries available on CentOS 5.6 Regards, Kaushal

3 2

Re: [CentOS] Issues with successfully completing rsync with msync. centos.org
by Christopher Hawker 13 Sep '11

13 Sep '11

The rsync command on the CentOS website, on the page that tells you how to setup a mirror. -- If you have any questions, please do not hesitate to contact me on +61 478 241 896. Regards, Christopher Hawker - original message - Subject: Re: [CentOS] Issues with successfully completing rsync with msync.centos.org From: John Doe <jdmls(a)yahoo.com> Date: 13/09/2011 9:04 am From: Christopher Hawker <cwhawker1(a)gmail.com> > I am trying to establish a mirror, and when I execute the rsync command, it only > creates the directories and selected files. It does not download the entire iso > collection or repo files. And which rsync command? JD _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

2 3

vim access
by Ashish Shaligram 13 Sep '11

13 Sep '11

Hello, I have install a cent os 6 x64, and i cant use vim command. Can you help me to how to access file more easily or more reliably. -- *Regards,* Ashish

4 3

CentOS 6: file and directory permissions
by Helmut Drodofsky 13 Sep '11

13 Sep '11

Hi, I fear I am too stupid: I find nowhere the explanation of the dot in file permissions like: -rw-r--r--. 1 root root 457 Aug 4 17:27 config I have searched in forums, Red Hat deployment guide, storage administration guide etc Thank you for help in advance. Best regards Helmut

4 3

trouble building an rpm
by Jon Detert 13 Sep '11

13 Sep '11

i'm a newbie at building rpms. I made a few rpms years ago, but can't now make one on Centos 5. In /usr/local/rpmbuild, there are 5 subdirs: BUILD RPMS SOURCES SPECS SRPMS tmp When I type: rpmbuild -ba /usr/local/rpmbuild/SPECS/centos-release-cr-ihc.spec I get 'file not found' errors, for paths in /usr/local/rpmbuild/tmp: error: File not found: /usr/local/rpmbuild/tmp/centos-release-cr-ihc-buildroot/etc/yum.repos.d error: File not found: /usr/local/rpmbuild/tmp/centos-release-cr-ihc-buildroot/etc/yum.repos.d/CentOS-cr.repo RPM build errors: File not found: /usr/local/rpmbuild/tmp/centos-release-cr-ihc-buildroot/etc/yum.repos.d File not found: /usr/local/rpmbuild/tmp/centos-release-cr-ihc-buildroot/etc/yum.repos.d/CentOS-cr.repo All i did was to: 1) put a tarball in SOURCES, 2) put a spec file in SPECS, 3) rpmbuild -ba my spec file Did I miss a step? If not, here's the contents of my tarball and spec file: The tarball in SOURCES is named: centos-release-cr-ihc-1.tar.gz the contents of which are: drwxr-xr-x root/root 0 2011-09-09 15:40:01 centos-release-cr-ihc-1/ drwxr-xr-x root/root 0 2011-09-09 15:39:57 centos-release-cr-ihc-1/etc/ drwxr-xr-x root/root 0 2011-09-09 15:40:39 centos-release-cr-ihc-1/etc/yum.repos.d/ -rw-r--r-- root/root 523 2011-09-09 15:35:59 centos-release-cr-ihc-1/etc/yum.repos.d/CentOS-cr.repo my spec file is /usr/local/rpmbuild/SPECS/centos-release-cr-ihc.spec the contents of which are: Summary: Package to set up IHC use of the centos-cr repository Name: centos-release-cr-ihc Version: 1 Release: 1 Source0: centos-release-cr-ihc-1.tar.gz License: GPL Group: IHC-config BuildArch: noarch BuildRoot: %{_tmppath}/%{name}-buildroot %description Package to set up IHC use of the centos-cr repository %prep %setup -q %build %install install -m 0755 -d /etc/yum.repos.d install -m 0755 etc/yum.repos.d/CentOS-cr.repo /etc/yum.repos.d/CentOS-cr.repo %clean rm -rf $RPM_BUILD_ROOT %post echo " " echo "Yay IHC IS Team!" %files %dir /etc/yum.repos.d /etc/yum.repos.d/CentOS-cr.repo Thanks, Jon

5 6

Issues with successfully completing rsync with msync.centos.org
by Christopher Hawker 13 Sep '11

13 Sep '11

Hello, I am trying to establish a mirror, and when I execute the rsync command, it only creates the directories and selected files. It does not download the entire iso collection or repo files. I am running CentOS 5.4 (which i will update soon as my host does not have a 5.6 or 6 image), and my IP address is 125.7.120.87, being hosted in Sydney, AU. Any ideas or suggestions would be appreciated. -- If you have any questions, please do not hesitate to contact me on +61 478 241 896. Regards, Christopher Hawker

2 1

fax over ip?
by hadi motamedi 13 Sep '11

13 Sep '11

Dear All I have upgraded to centos 6.0 and I installed ekiga as my sip phone client for centos. What application can I install as fax over ip client for centos 6.0? Thank you

5 14

(5.6) Kernel Link Error
by Always Learning 13 Sep '11

13 Sep '11

Installing VirtualBox-4.1* on Centos 5.6 X64, I get at the end:- Error! Your kernel headers for kernel 2.6.18-274.el5 cannot be found at /lib/modules/2.6.18-274.el5/build or /lib/modules/2.6.18-274.el5/source. In /lib/modules/2.6.18-274.el5/ I find two broken links:- build -> /usr/src/kernels/2.6.18-274.el5-x86_64 source -> ditto The reason why they are broken appears to be the current address is actually /usr/src/kernels/2.6.18-274.3.1.el5-x86_64 Show I reset the links in /lib/modules/2.6.18-274.el5 to point to /usr/src/kernels/2.6.18-274.3.1.el5-x86_64 or is their a bigger problem that needs attention ? -- With best regards, Paul. England, EU.

2 1

C6 continuous release repo
by James B. Byrne 13 Sep '11

13 Sep '11

Where on the CentOS website does one find the CentOS-6 CR repo install package? I can find the one for CentOS-5 but not for 6. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

3 3

CentOS 6, Broadcom, missing wlan0
by Michael D. Berger 13 Sep '11

13 Sep '11

This is a continuation of my previous thread: "Broadcom Wifi Problem" Following a post from "James A. Peltier", who said: You can use the rpmforge version or compile it yourself. I've used this one with success using the details described earlier. http://www.broadcom.com/support/802.11/linux_sta.php I did however have to patch it with http://www.broadcom.com/docs/linux_sta/5_100_82_38.patch the driver built and installed fine. In fact, I'm using it on my laptop as we speak. On my CentOS 6, with BCM4311 802.11b/g. I installed: hybrid-portsrc_x86_32-v5_100_82_38.tar.gz With NetworkManager shut off, I see: #lsmod | grep "b43\|ssb\|wl" wl 2635904 0 lib80211 4858 1 wl and I try to start with: ifup wlan0 I put debug in the script, following into nested scripts, and see that it ultimately fails because: ip -o link fails to return wlan0 . I rechecked the MAC address, which is correct. Also ifconfig and iwconfig do not see wlan0 . Also, the wlan0 light on the box doesn't turn from red to green. If, however, I reenable b43, the light does turn green. Also, on this dual boot box, the WinXP partition runs WLAN0 with no problem. Thanks for your suggestions. Mike.

2 3

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss