Discuss

discuss@lists.centos.org

34758 discussions

About I386 not fitting on one DVD
by david 18 Jul '11

18 Jul '11

Just a thought If the I386 (or i686, never could figure out why the name change) disk doesn't quite fit on the DVD+, and needs a DVD-, this might put some folks at an inconvenience. I wonder if the difference between fitting and not fitting is small enough, so that some amount of pruning might make it fit on the DVD+R image. Some ways to prune could be: a) Create two versions of the DVD, one with all the non-ideographic languages included, and one with the ideographic languares and a subset of the alphabet languages (English, German, French, ...) b) Find some less used but large package which presumes internet access. It could be downloaded with YUM c) Tackle the code bloat (oh yah, sure) David

7 12

Cannot install through (U)EFI
by Baptiste AGASSE 18 Jul '11

18 Jul '11

Hi all, I've a little problem with CentOS 6 and EFI on Dell Poweredge R510... My Logical disk (hardware raid) is a little bit greated than 9TB, so i must use EFI in order to see the whole disk space and boot on it, but my box don't want to boot on CentOS 6 x86_64 Install DVD when i'm in EFI boot mode. someone has successfully installed CentOS 6 x86_64 in EFI mode ? Regards.

2 1

Bacula dbcheck in CentOS6
by Joseph L. Casale 18 Jul '11

18 Jul '11

Anyone else notice that /usr/libexec/bacula/make_catalog_backup.pl runs a "dbcheck -B" which doesn't seem to exist in the version of dbcheck shipped with it? # strings /usr/sbin/dbcheck |grep -i print sprintf vfprintf snprintf -dt print timestamp in debug output -? print this message %d block read errors not printed. That makes it rather hard to do a catalogue backup with the shipped script? jlc

1 0

C6 install error about cyrus
by Jerry Geis 18 Jul '11

18 Jul '11

When I am install C6. I am getting an error about "A fatal error occurred when installing the cyrus-sasl package. Exit Installer. These are my packages: ls -l cyrus-* -rw-r--r-- 1 silentm silentm 11745776 Jul 3 00:08 cyrus-imapd-2.3.16-6.el6.x86_64.rpm -rw-r--r-- 1 silentm silentm 238380 Jul 3 00:03 cyrus-imapd-devel-2.3.16-6.el6.i686.rpm -rw-r--r-- 1 silentm silentm 237328 Jul 3 00:09 cyrus-imapd-devel-2.3.16-6.el6.x86_64.rpm -rw-r--r-- 1 silentm silentm 260504 Jul 3 00:09 cyrus-imapd-utils-2.3.16-6.el6.x86_64.rpm -rw-r--r-- 1 silentm silentm 78796 Jul 3 00:09 cyrus-sasl-2.1.23-8.el6.x86_64.rpm -rw-r--r-- 1 silentm silentm 309328 Jul 3 00:03 cyrus-sasl-devel-2.1.23-8.el6.i686.rpm -rw-r--r-- 1 silentm silentm 309068 Jul 3 00:09 cyrus-sasl-devel-2.1.23-8.el6.x86_64.rpm -rw-r--r-- 1 silentm silentm 33284 Jul 3 00:03 cyrus-sasl-gssapi-2.1.23-8.el6.i686.rpm -rw-r--r-- 1 silentm silentm 33764 Jul 3 00:09 cyrus-sasl-gssapi-2.1.23-8.el6.x86_64.rpm -rw-r--r-- 1 silentm silentm 28720 Jul 3 00:03 cyrus-sasl-ldap-2.1.23-8.el6.i686.rpm -rw-r--r-- 1 silentm silentm 29064 Jul 3 00:09 cyrus-sasl-ldap-2.1.23-8.el6.x86_64.rpm -rw-r--r-- 1 silentm silentm 137956 Jul 3 00:03 cyrus-sasl-lib-2.1.23-8.el6.i686.rpm -rw-r--r-- 1 silentm silentm 138868 Jul 3 00:09 cyrus-sasl-lib-2.1.23-8.el6.x86_64.rpm -rw-r--r-- 1 silentm silentm 46852 Jul 3 00:03 cyrus-sasl-md5-2.1.23-8.el6.i686.rpm -rw-r--r-- 1 silentm silentm 47284 Jul 3 00:09 cyrus-sasl-md5-2.1.23-8.el6.x86_64.rpm -rw-r--r-- 1 silentm silentm 35620 Jul 3 00:03 cyrus-sasl-ntlm-2.1.23-8.el6.i686.rpm -rw-r--r-- 1 silentm silentm 35728 Jul 3 00:09 cyrus-sasl-ntlm-2.1.23-8.el6.x86_64.rpm -rw-r--r-- 1 silentm silentm 30756 Jul 3 00:04 cyrus-sasl-plain-2.1.23-8.el6.i686.rpm -rw-r--r-- 1 silentm silentm 31020 Jul 3 00:09 cyrus-sasl-plain-2.1.23-8.el6.x86_64.rpm -rw-r--r-- 1 silentm silentm 31552 Jul 3 00:04 cyrus-sasl-sql-2.1.23-8.el6.i686.rpm -rw-r--r-- 1 silentm silentm 31768 Jul 3 00:09 cyrus-sasl-sql-2.1.23-8.el6.x86_64.rpm How might I tell whats wrong? or - I am using kickstart is this package "really" needed I could just exclude it. Jerry

1 0

redhat-release file on C6
by Stephen Harris 18 Jul '11

18 Jul '11

Curious as to why redhat-release says "CentOS Linux release" in C6, but on C5 it merely says 'CentOS release". This causes programs that try to parse the file (eg Xen Tools) to fail 'cos it can't parse properly. Yeah, it can be worked around, but it seems an unnecessary change :-( -- rgds Stephen

4 3

CentOS-6 firewall how to open a port
by Timothy Murphy 18 Jul '11

18 Jul '11

I'm running CentOS-6 on an HP MicroServer (since this morning) and I'd like to open an non-standard port, for use on a laptop attached to the internet through the server. Do I have to explicitly add an iptables rule? If so, and I want to open (say) udp port 500 , what command should I give? I've always used shorewall in the past, and will probably do so now if the default firewall is difficult to use. But I thought I would try it first as an experiment. My recollection is that in old versions of CentOS one could non-standard ports through system-config-firewall ; but it seems that now this can only be used for standard ports; I looked at <http://wiki.centos.org/HowTos/Network/IPTables> but didn't find it very enlightening. Any advice or suggestions gratefully received. -- Timothy Murphy e-mail: gayleard /at/ eircom.net tel: +353-86-2336090, +353-1-2842366 s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland

4 5

authconfig-gtk-6.1.9-1.fc14.i686.rpm missing durring URL Install ?
by Armelius Cameron 18 Jul '11

18 Jul '11

Hello, This is a rather strange problem. I am using the i386 netinstall CD to boot and do a URL (HTTP) install since my machine only has CD drive and can't boot from USB either. During the install, the installer was looking for package authconfig- gtk-6.1.9-1.fc14.i686.rpm and claims that it's missing. I checked the RPMs under packages, and for sure it wasn't there. But look at the package name. Why is the installer asking for .fc14. package ? authconfig-gtk-6.1.4-6.el6.i686.rpm exists instead, but I don't understand why the .fc14. package was requested. Anyone else sees this ? My install, of course, did not succeed. Thanks AC

3 3

SQUID Logrotate
by Railic Njegos 18 Jul '11

18 Jul '11

Hi all, i have problem, after uprade CentOS 5.5 to 5.6, Logrotate don't work on two proxy servers. I have installed : squid-2.6.STABLE21-6.el5 logrotate-3.7.4-9.el5_5.2 On first server , squid logs never rotated, config is here cat /etc/logrotate.d/squid /var/log/squid/access.log { weekly rotate 5 copytruncate compress notifempty missingok } /var/log/squid/cache.log { weekly rotate 5 copytruncate compress notifempty missingok } /var/log/squid/store.log { weekly rotate 5 copytruncate compress notifempty missingok # This script asks squid to rotate its logs on its own. # Restarting squid is a long process and it is not worth # doing it just to rotate logs postrotate /usr/sbin/squid -k rotate endscript } On second server squid logs rotated every day . Config : /var/log/squid/access.log { weekly rotate 5 copytruncate compress notifempty missingok } /var/log/squid/cache.log { weekly rotate 5 copytruncate compress notifempty missingok } /var/log/squid/store.log { weekly rotate 5 copytruncate compress notifempty missingok # This script asks squid to rotate its logs on its own. # Restarting squid is a long process and it is not worth # doing it just to rotate logs postrotate /usr/sbin/squid -k rotate endscript } Can someone help me ?

1 0

Upgrade from CentOS 5.4 to 5.6 -> 6.0
by Nguyen Vu Hung 18 Jul '11

18 Jul '11

Hi all, I am running 5.4 After running sudo yum clean all sudo yum update We got it upgraded to 5.6 cat /etc/redhat-release CentOS release 5.6 (Final) So, how can I get it my CentOS from 5.6 to 6.0? [vuhung@-08 ~]$ sudo yum update Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirror.vietoss.com * extras: mirror.vietoss.com * updates: mirror.vietoss.com Setting up Update Process No Packages marked for Update TIA, Vu Hung

5 6

issues when add driverdisk to centos5.6 using NFS method
by 郑栋辉 17 Jul '11

17 Jul '11

Hi, I am Ken.. I am trying to add dud(driver update disk) to centos5.6 using network method, I can successfully add dud to centos5.6 using http and ftp method, but fail when using nfs method. However those all three methods are officially supported in the centos5.6. As indicated in the centos5.6 website, we can see they not only support http, ftp, but also nfs. http://centos.org/docs/5/html/Installation_Guide-en-US/s1-kickstart2-option… ------------------------------------------------------------------------------------------ driverdisk (optional) Driver diskettes can be used during kickstart installations. You must copy the driver diskettes's contents to the root directory of a partition on the system's hard drive. Then you must use the driverdisk command to tell the installation program where to look for the driver disk. driverdisk <partition> [--type=<fstype>] Alternatively, a network location can be specified for the driver diskette: driverdisk --source=ftp://path/to/dd.img driverdisk --source=http://path/to/dd.img driverdisk --source=nfs:host:/path/to/img * <partition> Partition containing the driver disk. * --type= File system type (for example, vfat or ext2). ------------------------------------------------------------------------------------------ In my experiment, I make my dud address in the kickstart file like below: driverdisk --source=nfs:9.122.90.239:/deployment/dud-2.6.18-128-64.centos.iso but it fails to load the dud when centos begin to install. do you have any suggestion to me? Thanks -- BEST WISHES! 郑栋辉 Zheng donghui Dept.of Computer Science & Engineering, Shanghai Jiaotong University Tel: (+86) 1356-418-5078 Email: zhdhui(a)gmail.com MSN: zhdhui(a)gmail.com

3 2

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss