Discuss

discuss@lists.centos.org

34758 discussions

Asus Xonar DX PCIe sound card?
by tony＠softins.clara.co.uk 09 Feb '10

09 Feb '10

Can anyone here report success or failure at making the Asus Xonar DX PCI-express sound card work under CentOS 4? Or failing that, 5? Google only turned up people using it on Ubunt or SuSE... I need to specify the addition of audio outputs to a HP DL360 system, and don't want to buy stuff that will be a pain to get working. :-) Or can anyone recommend any other simple sound cards for PCI-express that have been trouble-free under CentOS 4 or 5? Cheers Tony -- Tony Mountifield Work: tony(a)softins.co.uk - http://www.softins.co.uk Play: tony(a)mountifield.org - http://tony.mountifield.org

1 0

Best way to backup virtual machines from Citrix XenServer.
by Rafał Radecki 09 Feb '10

09 Feb '10

Hi All. I have installed Citrix XenServer. It's Linux-based virtualization software. Could anyone propose a good way to make backups of virtual machines (Linux/Windows) in it? With regards, R.

10 11

auto mounting group shares
by Carlos Santana 09 Feb '10

09 Feb '10

I am using autofs to mount user's home and group directories. The setup works fine for home directories which are mounted after user logs in. The group shares are also mounted, but user has to manually do cd or ls command on group shares, e.g.: ls /groups/chemistry will mount chemistry group share. Is there any way to mount group shares automatically? I noticed that after successful login 'some program' performs chdir (cd) which probably tells autofs to mount home dirs. Which program does this operation? Is there any way to do this for group shares also? - CS.

2 1

slowness in sendmail - 60 second timeout
by Jerry Geis 08 Feb '10

08 Feb '10

I am sending an email from my machine devcentos5x64. the transcript below (hangs for 60 seconds) at the line: MAIL From:<root(a)devcentos5x64.msgnet.com> SIZE=56 AUTH=root(a)devcentos5x64.msgnet.com The email succeeds - but I am trying to figure out the 60 second delay. Neither email server is busy. Nothing is waiting. the DNS on both machines point to the same nameserver. The DNS responds very fast when looking up server names. What else can I look for to remove the slowness or delay? jerry ------------------------------------ date | mail -v -v -v -v geisj(a)pagestation.com geisj(a)pagestation.com... Connecting to [127.0.0.1] via relay... 220 devcentos5x64.msgnet.com ESMTP Sendmail 8.13.8/8.13.8; Mon, 8 Feb 2010 10:02:15 -0500 >>> EHLO devcentos5x64.msgnet.com 250-devcentos5x64.msgnet.com Hello localhost [127.0.0.1], pleased to meet you 250-ENHANCEDSTATUSCODES 250-PIPELINING 250-8BITMIME 250-SIZE 250-DSN 250-ETRN 250-AUTH DIGEST-MD5 CRAM-MD5 250-DELIVERBY 250 HELP >>> MAIL From:<root(a)devcentos5x64.msgnet.com> SIZE=56 AUTH=root(a)devcentos5x64.msgnet.com 250 2.1.0 <root(a)devcentos5x64.msgnet.com>... Sender ok >>> RCPT To:<geisj(a)pagestation.com> >>> DATA 250 2.1.5 <geisj(a)pagestation.com>... Recipient ok 354 Enter mail, end with "." on a line by itself >>> . 250 2.0.0 o18F2FMV002336 Message accepted for delivery geisj(a)pagestation.com... Sent (o18F2FMV002336 Message accepted for delivery) Closing connection to [127.0.0.1] >>> QUIT 221 2.0.0 devcentos5x64.msgnet.com closing connection [root@devcentos5x64 src]#

6 8

busybox for centos
by premrajm＠digilink.in 08 Feb '10

08 Feb '10

Hi, I am trying to build busybox for the centos-5.3,but facing issues in installing the busybox executable into the centos filesystem. Is it possible to build a busybox for a server platform (x86) with centos. Thanks and Regards, Premraj Disclaimer : This message is proprietary to Smartlink Network Systems Limited and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Smartlink Network Systems Ltd. accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus. ______________________________________________________________________________ This email has been scrubbed for your protection by SecureMX. For more information visit http://securemx.in ______________________________________________________________________________

3 2

Exim installation on CentOS
by james Tanit 08 Feb '10

08 Feb '10

Could someone please share some thoughts on how to set up the /etc/hosts and /etc/aliases? This is tough to set up due to the poorly written manual.

4 9

iSCSI + kickstart
by Ugo Bellavance 08 Feb '10

08 Feb '10

Hi, (I'm using RHEL, but I posted on redhat.general and rhel5 mailing lists and didn't get an answer, so I'm taking a chance here as well) Two of my servers have 2 nics (HP DL495c G5). Using RHEL 5.4, I'd like to do a network install to boot from iSCSI, as the NIC supports it, following this document: http://kbase.redhat.com/faq/docs/DOC-6875. However, since my data network is on a network segment that is separated from the SAN (iSCSI) network segment, I'd need to install from pxeboot using the LAN VLAN, but configure another nic so that it has access ot the SAN VLAN. From what I can see, it is not possible to assign a vlan in kickstart, and kickstart can only configure one NIC using the --network parameter. However, I managed to configure another nic using a %pre%. It also looks impossible to create a bonded interface in kickstart, which I'd like to be able to create. Ideally, I'd like a bonded interface in failover mode, and some vlan'd interface on top of the bonded interface. But I could manage that afterwards, I guess. It looks like only my first physical NIC can boot from the SAN, so ideally, I'd need to have a eth0 to be in the SAN segment, and configure eth1 for the LAN, so that it can see my dhcp, pxeboot and tftp server. Then I guess I must change the boot mode of my NIC so that it boots using iSCSI instead of PXE (after the install). But then, will multipath be configured? Since I have two controllers, the lun shows me two disks... If anyone has had experience with this kind of installation, please let me know. Thanks, Ugo

1 0

directory and file permission help
by adrian kok 08 Feb '10

08 Feb '10

Hi I move a zip file from window to linux but all permission of folder and files are kept in 700 How can I change it one time? I don't need to change directory under directory to change as folder as 755 and files as 644 Thank you for your help Send instant messages to your online friends http://uk.messenger.yahoo.com

4 3

Changing size of a xen guest filesystem
by Jussi Hirvi 07 Feb '10

07 Feb '10

It should be easy, but I have not yet found a solution. Only some methods involving use of dd, but that sounds a little scary to me on a production server. I wish there would be a command "virt-resize", but no... Maybe "virt-clone", with the option --file=DISKFILE, could be bended to do this? - Jussi Hirvi -- Jussi Hirvi * Green Spot Topeliuksenkatu 15 C * 00250 Helsinki * Finland Tel. +358 9 493 981 * Mobile +358 40 771 2098 (only sms) jussi.hirvi(a)greenspot.fi * http://www.greenspot.fi The point is that what each one of us does from the time we wake until the time we sleep makes a difference. - Jane Goodall

3 4

Somewhat off topic: Building Android on CentOS 5.4
by Paul R. Ganci 07 Feb '10

07 Feb '10

I asked this question on android-platform(a)googlegroups.com but never received a response. I suspect most (if not all) people compiling the Android platform are using some version of Ubuntu ... hence the lack of response. I would not normally cross post but am hopeful that another CentOS 5.4 user (not on the android-platform forum) might have successfully built the Android platform. I would be extremely grateful if he or she could publish the procedure they used to do so. In any event here is the motivation of why I want to build the Android platform and a description of the problem I encountered: I have a Samsung Moment which the Android module adb will not detect due to a bug in usb_linux.c. Therefore I have been trying to compile a patched version of adb on Centos 5.4. I have followed these instructions in effort to build adb on cupcake: > > cd $HOME/download/android > > repo init -u git://android.git.kernel.org/platform/manifest.git -b cupcake > > repo sync > > cd system/core/adb > > patch -b usb_linux.c usb_linux.c.patch > > cd ../../.. > > make adb > build/core/product_config.mk:261: WARNING: adding test OTA key ============================================ TARGET_PRODUCT=generic TARGET_BUILD_VARIANT=eng TARGET_SIMULATOR= TARGET_BUILD_TYPE=release TARGET_ARCH=arm HOST_ARCH=x86 HOST_OS=linux HOST_BUILD_TYPE=release BUILD_ID= ============================================ /bin/bash: line 0: cd: dalvik/libcore//mnt/home/ganci/download/android//dalvik/libcore:/ No such file or directory /bin/bash: line 0: cd: dalvik/libcore//mnt/home/ganci/download/android//dalvik/libcore:/ No such file or directory dalvik/libcore/Android.mk:150: dalvik/libcore//mnt/home/ganci/download/android/dalvik/libcore/sub.mk: No such file or directory make: execvp: /bin/bash: Argument list too long make: *** No rule to make target `dalvik/libcore//mnt/home/ganci/ download/android/dalvik/libcore/sub.mk'. Stop. Everything works until the make. I have tried several different variations including making everything but everytime it seems the make is very confused about the directory structure. It is as if make is concatenating the relative directory dalvik/libcore with the full path /mnt/home/ganci/download/android/dalvik/libcore. I am open to suggestions. Thanks. -- Paul (ganci(a)nurdog.com)

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss