Discuss

discuss@lists.centos.org

34758 discussions

Best way to hold at 5.3 release
by Joseph L. Casale 08 Jan '10

08 Jan '10

I need to do some testing with 5.3 as its suggested that 5.4 has "some bugs in the toolchain and libc". That being the case, I can install with a url and repo line pointing to a mirror with 5.3 still but how does one properly make sure during subsequent uses of yum it doesn't attempt to use 5.4 rpms? Is it simple enough to just manually set '$releasever' to 5.3 in the repo file or do I need to do anything else? What actually happens to the 5.3 repo so that `yum update` actually switches repo's when one is available? Thanks! jlc

4 4

Re: [CentOS] SAN help
by Per Qvindesland 08 Jan '10

08 Jan '10

Hi Not sure if you have done this already but install multipath as the os sees multiple presented luns which needs to be tied up to one by multipath also do not use the rh drivers for you qlogic it's not recommended at all for any storage solutions. Per At Fredag, 08-01-2010 on 6:29 "Paras pradhan" wrote: Yes here is th o/p of fdisk -l. Two Luns are assigned. one of 323 G and another of 359 G as seen blow. sda is my local disk. So do you think incorrect zoning can lead to this? Thanks Paras. ----------------------------------------------------- [root@prd1 ~]# fdisk -l Disk /dev/sda: 146.1 GB, 146163105792 bytes 255 heads, 63 sectors/track, 17769 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 33 265041 83 Linux /dev/sda2 34 4210 33551752+ 82 Linux swap / Solaris /dev/sda3 4211 6821 20972857+ 83 Linux /dev/sda4 6822 17769 87939810 5 Extended /dev/sda5 6822 17769 87939778+ 83 Linux Disk /dev/sdb: 323.4 GB, 323459481600 bytes 255 heads, 63 sectors/track, 39325 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 1 2 16033+ 83 Linux /dev/sdb2 3 39325 315861997+ 83 Linux Disk /dev/sdc: 359.3 GB, 359399424000 bytes 255 heads, 63 sectors/track, 43694 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdc1 1 43694 350972023+ 83 Linux Disk /dev/sdd: 323.4 GB, 323459481600 bytes 255 heads, 63 sectors/track, 39325 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdd1 1 2 16033+ 83 Linux /dev/sdd2 3 39325 315861997+ 83 Linux Disk /dev/sde: 323.4 GB, 323459481600 bytes 255 heads, 63 sectors/track, 39325 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sde1 1 2 16033+ 83 Linux /dev/sde2 3 39325 315861997+ 83 Linux Disk /dev/sdf: 359.3 GB, 359399424000 bytes 255 heads, 63 sectors/track, 43694 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdf1 1 43694 350972023+ 83 Linux Disk /dev/sdg: 323.4 GB, 323459481600 bytes 255 heads, 63 sectors/track, 39325 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdg1 1 2 16033+ 83 Linux /dev/sdg2 3 39325 315861997+ 83 Linux Disk /dev/sdh: 323.4 GB, 323459481600 bytes 255 heads, 63 sectors/track, 39325 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdh1 1 2 16033+ 83 Linux /dev/sdh2 3 39325 315861997+ 83 Linux Disk /dev/sdi: 359.3 GB, 359399424000 bytes 255 heads, 63 sectors/track, 43694 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdi1 1 43694 350972023+ 83 Linux Disk /dev/sdj: 323.4 GB, 323459481600 bytes 255 heads, 63 sectors/track, 39325 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdj1 1 2 16033+ 83 Linux /dev/sdj2 3 39325 315861997+ 83 Linux Disk /dev/sdk: 323.4 GB, 323459481600 bytes 255 heads, 63 sectors/track, 39325 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdk1 1 2 16033+ 83 Linux /dev/sdk2 3 39325 315861997+ 83 Linux Disk /dev/sdl: 359.3 GB, 359399424000 bytes 255 heads, 63 sectors/track, 43694 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdl1 1 43694 350972023+ 83 Linux Disk /dev/sdm: 323.4 GB, 323459481600 bytes 255 heads, 63 sectors/track, 39325 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdm1 1 2 16033+ 83 Linux /dev/sdm2 3 39325 315861997+ 83 Linux On Thu, Jan 7, 2010 at 11:26 PM, Eero Volotinen wrote: On 1/8/10 7:21 AM, Paras pradhan wrote: > > > On Thu, Jan 7, 2010 at 11:08 PM, Eero Volotinen > wrote: > > On 1/8/10 6:38 AM, Paras pradhan wrote: > > My CentOS 5.4 box has a single HBA card with 2 ports connected to my > > Storage. 2 Luns are assigned to my HBA card. Under /dev instead of > > seeing 4 devices I can see 12 devices from sdb to sdm. I am using > qlogic > > driver that is bulitin to the OS. Has any one seen this kind of > situation? > > Sounds like zoning problem .. > > > Storage is HDS and the LUN type created was of type netware. I don't > know why this type but my storage administrator said its correct. This > might be an issue? > > Or if you can ellaborate how this is zoning problem it wud be great help. Are you sure that you can see correct luns? check the size ? -- Eero _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

2 1

SAN help
by Paras pradhan 08 Jan '10

08 Jan '10

My CentOS 5.4 box has a single HBA card with 2 ports connected to my Storage. 2 Luns are assigned to my HBA card. Under /dev instead of seeing 4 devices I can see 12 devices from sdb to sdm. I am using qlogic driver that is bulitin to the OS. Has any one seen this kind of situation? Paras

3 10

Mplayer and VDPAU
by fred smith 07 Jan '10

07 Jan '10

Does anyone here know if the mplayer from rpmfusion (mplayer-1.0-0.41.svn20090711.el5.rf) was compiled with VDPAU support? I've looked on the mplayer web site and it says you can use vdpau, but it doesn't say HOW. Would that be with something like "-vo vdpau" ?? Thanks! -- ------------------------------------------------------------------------------- .---- Fred Smith / ( /__ ,__. __ __ / __ : / / / / /__) / / /__) .+' Home: fredex(a)fcshome.stoneham.ma.us / / (__ (___ (__(_ (___ / :__ 781-438-5471 -------------------------------- Jude 1:24,25 ---------------------------------

3 7

MIgrate/Upgrade from Centos 5.4 32bit to Centos 5.4 64bit
by Oliver Schulze L. 07 Jan '10

07 Jan '10

Hi, It is posible to do a simple procedure to upgrade a Centos 5.4 32bits (i686) to a Centos 5.4 64bits(x32_64)? I was thinking about an upgrade or install without formating. I will have a current backup before doing it. Any advice/tips is welcome. Many thanks Oliver -- Oliver Schulze http://tinymailto.com/oliver

3 4

Re: [CentOS] CentOS 5.4 x86_64 and HPLIP-3.9.12
by gene.poole＠macys.com 07 Jan '10

07 Jan '10

All, I did contact the HP Launchpad site and receive instructions to re-install their driver with some changes I hadn't done. I plan on attempting that this evening and I'll reply tomorrow and let everyone know how it went. Thanks, Gene Poole

1 0

High l-avg with centos 4.8 on G2 only
by fortin.pierre＠bell.ca 07 Jan '10

07 Jan '10

Hi We deployed centos 4.8 on HP DL380 G2, G3 and G4 servers (same number of cpus). The same software is running on all servers. Only on G2 servers we see a low cpu utilization combined with high load-average. For example, during the same time of day and same workload, on a G2 I see a l-avg of 11.31 and on a G4 I see 2.68. The server response time seems unchanged and we don't have any problem with it so far, but I need to figure out why the l-avg remains high. We were running redhad AS 3 before, and the l-avg was low on all server type. Anyone have an idea where I should look.

3 4

cron job schedule problem
by mcclnx mcc 07 Jan '10

07 Jan '10

We have CENTOS 5.3 on DELL server. there has a cron job supposedly should run on 1st and 3rd week on Saturday but it run everyday. anyone know what wrong? 01 08 1-7,15-21 * 6 program.sh ___________________________________________________ 您的生活即時通－溝通、娛樂、生活、工作一次搞定！ http://messenger.yahoo.com.tw/

3 2

centos IDM + sogo
by Geoff Galitz 07 Jan '10

07 Jan '10

Hello, We are testing the Centos LDAP Directory Server but are running into issues with applications (SOGo) authenticating against the LDAP system. The crux of my question is, can I just treat the Centos Directory Server as a generic OpenLDAP configuration on the client side? In more detail when I try to add account via ldapadd: -------------------------------- ldapadd -f sogo.ldif -x -W -D cn="Directory Manager",dc=XXX,dc=de Enter LDAP Password: ldap_bind: No such object (32) matched DN: dc=XXX,dc=de ------------------------------- It is my understanding that this means the "Directory Manager" user was not found. User authentication does not work from SOGo, at all. Any pointers? --------------------------------- Geoff Galitz Blankenheim NRW, Germany http://www.galitz.org/ http://german-way.com/blog/

2 1

Dear Centos Mailing List, If you can't find in google, try JUSTDIAL.COM
by Dhiraj Chatpar 07 Jan '10

07 Jan '10

Dear Centos Mailing List,I strongly recommend this website www.justdial.com. It's a world class local search service & I've always found anything I've ever wanted.You can find info on any company, product, or service in over 240 cities in India.You can also call them up 24x7, on phone (69999999), a local call in 240 Indian cities.Ask for anything, you'll get the info on the phone and/or by SMS within 30 secs, and this service is at no cost!For a change, it's an original Indian idea and an Indian company with world class service, and with a vision to spread all over the world.Be a proud Indian and forward this to every Indian you know.Best Wishes,Dhiraj ChatparClick Here to unsubscribe.

12 22

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss