Hello,
I started smartctl -t short of disk in RAID1, but during this
operation this disk was kicked from RAID (only from one MD of three).
/var/log/messages:
Nov  1 16:45:45 server kernel: ata1.00: exception Emask 0x0 SAct 0x0
SErr 0x0 action 0x0
Nov  1 16:45:45 server kernel: ata1.00: cmd
ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Nov  1 16:45:45 server kernel:      res
51/04:00:38:df:f7/00:00:00:00:00/a7 Emask 0x1 (device error)
Nov  1 16:45:45 server kernel: ata1.00: status: { DRDY ERR }
Nov  1 16:45:45 serve kernel: ata1.00: error: { ABRT }
Nov  1 16:45:45 server kernel: ata1.00: configured for UDMA/133
Nov  1 16:45:45 server kernel: ata1: EH complete
Nov  1 16:45:45 server kernel: SCSI device sda: 625142448 512-byte
hdwr sectors (320073 MB)
Nov  1 16:45:45 server kernel: sda: Write Protect is off
Nov  1 16:45:45 server kernel: SCSI device sda: drive cache: write back
Nov  1 16:45:52 server kernel: ata1.00: exception Emask 0x0 SAct 0x0
SErr 0x0 action 0x0
Nov  1 16:45:52 server kernel: ata1.00: cmd
ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Nov  1 16:45:52 server kernel:      res
51/04:00:38:df:f7/00:00:00:00:00/a7 Emask 0x1 (device error)
Nov  1 16:45:52 server kernel: ata1.00: status: { DRDY ERR }
Nov  1 16:45:52 server kernel: ata1.00: error: { ABRT }
Nov  1 16:45:52 server kernel: ata1.00: configured for UDMA/133
Nov  1 16:45:52 server kernel: ata1: EH complete
Nov  1 16:45:52 server kernel: SCSI device sda: 625142448 512-byte
hdwr sectors (320073 MB)
Nov  1 16:45:52 server kernel: sda: Write Protect is off
Nov  1 16:45:52 server kernel: SCSI device sda: drive cache: write back
Nov  1 16:47:43 server kernel: ata1.00: exception Emask 0x0 SAct 0x0
SErr 0x0 action 0x0
Nov  1 16:47:43 server kernel: ata1.00: BMDMA stat 0x25
Nov  1 16:47:43 server kernel: ata1.00: cmd
ca/00:08:1f:41:1e/00:00:00:00:00/e1 tag 0 dma 4096 out
Nov  1 16:47:43 server kernel:      res
51/10:08:1f:41:1e/00:00:00:00:00/e1 Emask 0x81 (invalid argument)
Nov  1 16:47:43 server kernel: ata1.00: status: { DRDY ERR }
Nov  1 16:47:43 server kernel: ata1.00: error: { IDNF }
Nov  1 16:47:43 server kernel: ata1.00: configured for UDMA/133
Nov  1 16:47:43 server kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002
Nov  1 16:47:43 server kernel: sda: Current [descriptor]: sense key:
Aborted Command
Nov  1 16:47:43 server kernel:   Add. Sense: Recorded entity not found
Nov  1 16:47:43 server kernel:
Nov  1 16:47:44 server kernel: Descriptor sense data with sense
descriptors (in hex):
Nov  1 16:47:44 server kernel:     72 0b 14 00 00 00 00 0c 00 0a
80 00 00 00 00 00
Nov  1 16:47:44 server kernel:     01 1e 41 1f
Nov  1 16:47:44 server kernel: end_request: I/O error, dev sda, sector 18759967
Nov  1 16:47:44 server kernel: raid1: Disk failure on sda1, disabling device.
Nov  1 16:47:44 server kernel: Operation continuing on 1 devices
Nov  1 16:47:44 server kernel: ata1: EH complete
Nov  1 16:47:44 server kernel: SCSI device sda: 625142448 512-byte
hdwr sectors (320073 MB)
Nov  1 16:47:44 server kernel: sda: Write Protect is off
Nov  1 16:47:44 server kernel: SCSI device sda: drive cache: write back
Nov  1 16:47:44 server kernel: RAID1 conf printout:
Nov  1 16:47:44 server kernel:  --- wd:1 rd:2
Nov  1 16:47:44 server kernel:  disk 0, wo:1, o:0, dev:sda1
Nov  1 16:47:44 server kernel:  disk 1, wo:0, o:1, dev:sdb1
Nov  1 16:47:44 server kernel: RAID1 conf printout:
Nov  1 16:47:44 server kernel:  --- wd:1 rd:2
Nov  1 16:47:44 server kernel:  disk 1, wo:0, o:1, dev:sdb1
And output of smarctl -all:
=== START OF INFORMATION SECTION ===
Device Model: WDC WD3201ABYS-01B9A0
Serial Number:
Firmware Version: 13.01C02
User Capacity: 320Â 072Â 933Â 376 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Nov 1 19:26:47 2009 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an
interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (8400) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 100) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0003 156 156 021 Pre-fail
Always - 5183
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 82
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000e 200 200 000 Old_age
Always - 0
9 Power_On_Hours 0x0032 081 081 000 Old_age
Always - 14329
10 Spin_Retry_Count 0x0012 100 253 000 Old_age
Always - 0
11 Calibration_Retry_Count 0x0012 100 253 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 82
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age
Always - 58
193 Load_Cycle_Count 0x0032 200 200 000 Old_age
Always - 82
194 Temperature_Celsius 0x0022 123 106 000 Old_age
Always - 24
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age
Offline - 0
SMART Error Log Version: 1
ATA Error Count: 5
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 5 occurred at disk power-on lifetime: 14329 hours (597 days + 1 hours)
When the command that caused the error occurred, the device was
doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 08 a7 4a 1e e1 Error: IDNF at LBA = 0x011e4aa7 = 18762407
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 08 a7 4a 1e e1 0a 45d+04:44:26.835 WRITE DMA
ca 00 08 3f 14 00 e2 0a 45d+04:44:26.816 WRITE DMA
Error 4 occurred at disk power-on lifetime: 14326 hours (596 days + 22 hours)
When the command that caused the error occurred, the device was
doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 08 1f 41 1e e1 Error: IDNF at LBA = 0x011e411f = 18759967
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 08 1f 41 1e e1 0a 45d+02:30:44.518 WRITE DMA
ca 00 08 3f 14 00 e2 0a 45d+02:30:44.504 WRITE DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 14329 -
# 2 Short offline Completed without error 00% 14329 -
# 3 Extended offline Completed without error 00% 14328 -
# 4 Short offline Completed without error 00% 14326 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
This device was kicked from MD during #4 and #2 short test. Second HDD
(same as this problematic) is without errors.
Thank you for you help
