Discuss

discuss@lists.centos.org

34758 discussions

grub issue
by Indunil Jayasooriya 16 Mar '09

16 Mar '09

HI, I always get a grub prompt ,after I installed 2nd processor to the Server IBM x3610 At the grub prompt, I always have to issue below commands. Then, Server starts successfully. grub> root (hd0,0) Filesystem type is ext2fs, partition type 0x83 grub> kernel /vmlinuz-2.6.18-128.1.1.el5PAE [Linux-bzImage, setup=0x1e00, size=0x1bb714] grub> initrd /initrd-2.6.18-128.1.1.el5PAE.img grub> boot Could you pls let me know to overcome this issue? Hope to hear from you. -- Thank you Indunil Jayasooriya

4 4

That RTL8169 thing...
by Drew Weaver 16 Mar '09

16 Mar '09

Motherboard - Intel DG41TY Device: RealTek: 8111D Driver: RTL8169 Causes Kernel panic during install and boot. -- It seems that the newer the card that uses this driver, the worse the problems are. Is there any plan to roll a newer version into the installer or the actual distribution itself? Thanks, -Drew

2 1

Re: [CentOS] NTP error message on /var/log/messages
by mcclnx mcc 16 Mar '09

16 Mar '09

Thanks. You are right. I did NOT reboot after change Ip address. It is correct now. --- 09/3/15 (日)，Filipe Brandenburger <filbranden(a)gmail.com> 寫道： > 寄件者: Filipe Brandenburger <filbranden(a)gmail.com> > 主旨: Re: [CentOS] NTP error message on /var/log/messages > 收件者: "CentOS mailing list" <centos(a)centos.org> > 日期: 2009 3 15 日下午 7:30 > Hi, > > 2009/3/15 mcclnx mcc <mcclnx(a)yahoo.com.tw>: > > I just setup CENTOS 4.7 with latest patches on DELL > server. > > 狢 also configured NTP point to out time server. 狢 > found > > /var/log/messages file every 20 to 30 minutes will > generate > > a error message : > > Mar 15 14:28:15 SER1 ntpd[25037]: > sendto(172.29.21.16): Invalid argument > > I saw this once when I changed a machine's IP but did not > restart the > NTP service. The daemon was still trying to send/receive > packets using > the old IP. After restarting NTP (service ntpd restart) the > problem > was fixed. > > Make sure you also check that NTP is properly synchronizing > the clocks > with the "ntpq -p" command. > > HTH, > Filipe > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos > ______________________________________________________________________________________________________ 付費才容量無上限？Yahoo!奇摩電子信箱2.0免費給你，信件永遠不必刪！ http://tw.mg0.mail.yahoo.com/dc/landing

1 0

php 5.2
by Melinda Odom 16 Mar '09

16 Mar '09

Hi, Is there any news about CentOS 5.2 updating to php 5.2? Best Regards, Melinda Odom Design Hosting, Inc. Web Design, Web Hosting, & Ecommerce Solutions 479-471-0891 CST info(a)designhosting.biz http://www.designhosting.biz

5 4

php 5.2
by Melinda Odom 16 Mar '09

16 Mar '09

Hi, I am running centos 5 with php 5.1.6-20 and mysql 5.0.45-7.el5 on a production server running a lot of ecommerce stores. The future next versions of these stores all are requiring php 5.2 at least. I don't want any problems with the ecommerce stores I have now with php 5.1.6-20 so don't know what to do. With the next version of one store I will need php 5.2 plus MySQLi extension. Another store version I will need only php 5.2. I found several posts last night about php 5.2 never being in centos 5 because redhat wouldn't support centos. Any advice is greatly appreciated. Thanks! Best Regards, Melinda Odom Design Hosting, Inc. Web Design, Web Hosting, & Ecommerce Solutions 479-471-0891 CST info(a)designhosting.biz http://www.designhosting.biz

3 3

Re: [CentOS] php 5.2
by Melinda Odom 15 Mar '09

15 Mar '09

5 4

Installing php 5.2
by Todd Cary 15 Mar '09

15 Mar '09

In reading the help file for yum, I am confused on how to find out if my php 4.3 can be updated to php 5.2 using yum. Any suggestion would be appreciated... Todd -- Ariste Software Petaluma, CA 94952 http://www.toddcary.com/aristephotography/

2 1

running yum from userid
by Robert Moskowitz 15 Mar '09

15 Mar '09

I added via visudo my userid for authorization of me ALL(ALL) NOPASSWD: ALL and I still cannot run yum as me. Is this just not possible?

5 5

dvd rw not recognized
by Frank Cox 14 Mar '09

14 Mar '09

I installed Centos 5.2 on a brand new computer the other day. It has an Asus DVD RW drive in it which I used to boot the netboot disk off of to install the operating system so it found the dvd at that point. Now k3b tells me that it can't find any drives. [nathalie@jeff ~]$ ll /dev/scd0 brw------- 1 nathalie disk 11, 0 Mar 10 14:00 /dev/scd0 [nathalie@jeff ~]$ ll /dev/cdrom* lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/cdrom -> scd0 lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/cdrom-sr0 -> scd0 [nathalie@jeff ~]$ ll /dev/dvd* lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/dvd -> scd0 lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/dvdrw -> scd0 lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/dvdrw-sr0 -> scd0 lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/dvd-sr0 -> scd0 lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/dvdwriter -> scd0 lrwxrwxrwx 1 root root 4 Mar 10 14:00 /dev/dvdwriter-sr0 -> scd0 cdrecord --scanbus tells me this: 1,0,0 100) * 1,1,0 101) '��' '��' '��' Removable vendor specific 7 unknown/no device 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) * /var/log/messages tells me this: Mar 10 13:06:22 jeff kernel: sd 1:0:0:0: Attached scsi disk sda Mar 10 13:06:22 jeff kernel: Vendor: ASUS Model: DRW-20B1ST Rev: 1 .00 Mar 10 13:06:22 jeff kernel: Type: CD-ROM ANSI S CSI revision: 05 dmesg tells me this: sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:1:0: Attached scsi CD-ROM sr0 What am I doing wrong here? -- MELVILLE THEATRE ~ Melville Sask ~ http://www.melvilletheatre.com

1 0

pop3 attack
by James Pifer 14 Mar '09

14 Mar '09

I was looking at my maillog and it looks like someone is trying to get into my pop3 server. Dec 9 15:28:54 mailserver dovecot: pop3-login: Aborted login: user=<alexis>, method=PLAIN, rip=::ffff:66.167.184.203, lip=::ffff:192.168.1.2 Dec 9 15:29:08 mailserver dovecot: pop3-login: Aborted login: user=<alfonso>, method=PLAIN, rip=::ffff:66.167.184.203, lip=::ffff:192.168.1.2 Dec 9 15:29:14 mailserver dovecot: pop3-login: Aborted login: user=<alexis>, method=PLAIN, rip=::ffff:66.167.184.203, lip=::ffff:192.168.1.2 Dec 9 15:29:18 mailserver dovecot: pop3-login: Aborted login: user=<alfonso>, method=PLAIN, rip=::ffff:66.167.184.203, lip=::ffff:192.168.1.2 Dec 9 15:29:36 mailserver dovecot: pop3-login: Aborted login: user=<alfred>, method=PLAIN, rip=::ffff:66.167.184.203, lip=::ffff:192.168.1.2 How worried should I bee about this? Any suggestions for dealing with it? Thanks, James

22 59

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss