Discuss

discuss@lists.centos.org

8 participants
34745 discussions

copy with bunzip2?
by Frank Cox 08 Jan '19

08 Jan '19

I have several pdf files as .pdf.bz2, as seen here: a/1.pdf.bz2 a/2.pdf.bz2 a/b/3.pdf.bz2 a/b/c/4.pdf.bz2 I want to copy everything in and under directory a to another computer, but I want the files to be decompressed on the destination machine: a/1.pdf a/2.pdf a/b/3.pdf a/b/c/4.pdf I could just use rsync and run a bunch of bunzip2 commands on the destination after the copying is completed, but perhaps there's a better way that would decompress the files in transit instead? -- MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com

2 1

Re: [CentOS] has anyone a working example for a ks.cfg with two disks?
by Ralf Prengel 08 Jan '19

08 Jan '19

Hallo, this version is working here now. Ralf bootloader --append=" crashkernel=auto" --location=mbr --boot-drive=sda # Partition clearing information clearpart --all --initlabel --drives=sda,sdb # Disk partitioning information part / --fstype="ext4" --ondisk=sda --grow --size=1 part swap --fstype="swap" --ondisk=sda --size=8192 part /mnt/platte02 --fstype="ext4" --ondisk=sdb --size=1 --grow

1 0

Re: [CentOS] has anyone a working example for a ks.cfg with two disks?
by Ralf Prengel 08 Jan '19

08 Jan '19

Zitat von Jack Bailey <jack(a)internetguy.net>: > Here's one of my kickstarts: > > zerombr > clearpart --all --initlabel --drives=$1,$2 Hallo, thanks but dowsn t work here. The installer doesn t accept $1 Ralf

1 0

has anyone a working example for a ks.cfg with two disks?
by Ralf Prengel 08 Jan '19

08 Jan '19

Hallo, has anyone a working example for a ks.cfg with two disks? disk sda swap and / disk sdb /mnt/disk02 I found several ks.cfg examples but none is working here. Centos 7.6 is in use. Thanks Ralf

1 0

Encrypting a file
by mark 08 Jan '19

08 Jan '19

I'm running C6. I want to encrypt a file or two, before I email it. Now, I have a very long passphrase - I used it a number of years ago. and that worked. It's about a paragraph long. For the last year or two, since one upgrade, kgpg popped up a window when I logged in. Until a few days ago, I just hit cancel. But, since this came up, I tried to run it. It got to "enter a passphrase"... and it FROZE MY ENTIRE WORKSPACE. I couldn't copy and paste from another window. I couldn't change focus to *anything*. So, given I want to use a long passphrase, I'd like to either copy and paste, or tell it to use a file. I'm not seeing any way to do this in the gpg manpage. Clues for the poor? mark

1 0

can XFS filesystem recover rm'ed files?
by Dave Burns 07 Jan '19

07 Jan '19

Yes, I rm'ed the wrong directory. The disk has not been written to since, now mounted ro. Is it possible to recover the files without doing forensics on the whole partition? I know the UID and path. XFS is supposed to be pretty amazing, can I get it to do this? Thanks, Dave

2 1

Upgrade CentOS 7.4 to 7.5 and don't want to upgrade it to 7.6
by Kaushal Shriyan 07 Jan '19

07 Jan '19

Hi, Is there a way to upgrade from Centos Linux release 7.4.1708 (Core) to Centos Linux release 7.5.1804 (Core) and not up to CentOS Linux release 7.6.1810 (Core) as the product does not support the latest CentOS Linux release 7.6.1810 (Core) version as of now. It is still a work in progress. Any help will be highly appreciable. I look forward to hearing from you. Thanks in Advance. Best Regards, Kaushal

10 12

libvirt guest on host's shutdown/reboot - problem
by lejeczek 07 Jan '19

07 Jan '19

hi guys I have just two guest after which libvirt looks and when I shutdown those guests: $ virsh shutdown $_dom that domain takes little time to power down, as expected one would say(~20sec) But! I reboot the hosts and I have in my: /etc/sysconfig/libvirt-guests : ON_SHUTDOWN=shutdown PARALLEL_SHUTDOWN=1 SHUTDOWN_TIMEOUT=300 I see libvirtd service shut down takes minutes, a few good minutes to deal with guests shutdown(I suppose?) How could I dig into it and troubleshoot? Would you have any idea as why libvirtd shutdown takes that long? many thank, L.

2 1

CentOS-announce Digest, Vol 167, Issue 1
by centos-announce-request＠centos.org 07 Jan '19

07 Jan '19

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2019:0022 Important CentOS 7 keepalived Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Sun, 6 Jan 2019 12:09:18 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2019:0022 Important CentOS 7 keepalived Security Update Message-ID: <20190106120918.GA3507(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2019:0022 Important Upstream details at : https://access.redhat.com/errata/RHSA-2019:0022 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 4171b23d7282f67bd3938bcac81eee43583a4936513b5e5346e958087bed3b86 keepalived-1.3.5-8.el7_6.x86_64.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ Subject: Digest Footer _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce ------------------------------ End of CentOS-announce Digest, Vol 167, Issue 1 ***********************************************

1 0

ipmi_sdr_cache_create: internal IPMI error
by Ralf Prengel 07 Jan '19

07 Jan '19

Hallo, this happens using freeipmi here on Centos 7 [root@srvdockerndxx etc]# ipmi-sensors Caching SDR repository information: /root/.freeipmi/sdr-cache/sdr-cache-srvdockerndxx.localhost ipmi_sdr_cache_create: internal IPMI error [root@srvdockerndxx etc]# The problem: It is my first try to use freeipmi. The goal is to use it with check-mk to monitor the system. Has anyone a good tutorial or a hint to solve the problem? Thanks Ralf

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss