Discuss

discuss@lists.centos.org

34753 discussions

How to set macaddr with nmcli
by Robert Moskowitz 03 Aug '18

03 Aug '18

I see my problem. I mis-read what nmcli con mod eth0 mac "02:67:15:00:81:0B" does. It sets HWADDR; which interface to link to, not MACADDR, what MAC address you want for your interface. So I have read the nmcli pages and googled a bit. I cannot find a way to set MACADDR. I suppose I can set HWADDR then use sed to change it to MACADDR, but this seems a real hack. ARM boards do not have assigned MAC addresses. Uboot uses various information to generate a local MAC address. I want finer control of my MAC address for my servers. In the past, I just edited ifcfg-eth0. I am trying now to do it all with nmcli. I thought I had it, but I misread the manual. Any pointers? thanks BTW, I remember setting MAC addresses on 3COM 3C501C boards because the old board died and we had software licensed to specific MAC addresses. So you had to specify your MAC address in the config file. The DEC admin had to do a similar thing if he had to swap out his LAN card (related: read up on why Dr. Comer set ARP timeout to 10min). Then there was that counterfeit 3C503C from Malaysia, all with the same MAC address. Caused havoc on the networks. EVERYONE had to specify their MAC address with those. 3COM did find the plant making these clones and shut them down. But the damage was done to a lot of us.

1 0

ifcfg-link?
by Robert Moskowitz 03 Aug '18

03 Aug '18

This is happening with the Centos7-armv7 image 1804, but I was wondering if it is a broader C7 issue. My image has only 2 ifcfg files: ifcfg-l0 and -link. 'ip a' is listing the ethernet as eth0. ifcfg-link has contains: DEVICE=link BOOTPROTO=dhcp ONBOOT=on I then used nmcli to create my ifcfg-eth0 nmcli con delete eth0 nmcli con add type ethernet con-name eth0 ifname eth0 ip4 192.168.129.11/25 gw4 192.168.129.1 nmcli con mod eth0 ipv4.dns "50.253.254.2 192.168.129.1" nmcli con mod eth0 mac "02:67:15:00:81:0B" I moved the cable to the 192.168.129.1 vlan (which does not have a dhcp server), and nmcli con up eth0 Error: Connection activation failed: No suitable device found for this connection. Oops. ? rebooting did not help. Came up with no address for interface eth0, yet no suitable device. Where would I look to find what may be happening here? I appreciate that this may be specific to armv7 and my Cubieboard2, but then again, it may be something known by other Centos people. Thanks for any help!

1 1

NFS/RDMA connection closed
by admin＠genome.arizona.edu 02 Aug '18

02 Aug '18

Hi, we are having a problem with NFS using RDMA protocol over our FDR10 Infiniband network. I previously wrote to NFS mailing list about this, so you may find our discussion there. I have taken some load off the server which was using NFS for backups, and converted it to use SSH, but we are still having critical problems with NFS clients losing connection to the server, causing the clients to hang and needing a reboot. I wanted to check in here before filing a bug with CentOS. Our setup is a cluster with one head node (NFS server) and 9 compute nodes (NFS clients). All the machines are running CentOS 6.9 2.6.32-696.30.1.el6.x86_64 and using the "Inbox"/CentOS RDMA implementation/drivers (not Mellanox OFED). (We also have other NFS clients but they are using 1GbE for NFS connection and, while they will still hang with messages like "NFS server not responding, retrying" or "timed out", they will eventually recover and don't need a reboot.) On the server (which is named pac) I will see messages like this: Jul 30 18:19:38 pac kernel: svcrdma: failed to send reply chunks, rc=-5 Jul 30 18:19:38 pac kernel: svcrdma: failed to send write chunks, rc=-5 Jul 31 15:03:05 pac kernel: svcrdma: failed to send write chunks, rc=-5 Jul 31 15:09:06 pac kernel: svcrdma: failed to send write chunks, rc=-5 Jul 31 15:16:09 pac kernel: svcrdma: failed to send write chunks, rc=-5 Jul 31 15:23:31 pac kernel: svcrdma: Error -107 posting RDMA_READ Jul 31 15:53:55 pac kernel: svcrdma: failed to send write chunks, rc=-5 Jul 31 16:09:19 pac kernel: svcrdma: failed to send reply chunks, rc=-5 Jul 31 16:09:19 pac kernel: svcrdma: failed to send reply chunks, rc=-5 Previously I had also seen messages like "Jul 11 21:09:56 pac kernel: nfsd: peername failed (err 107)!" however have not seen that in this latest hangup. And on the clients (named n001-n009) I will see messages like this: Jul 30 18:17:26 n001 kernel: RPC: rpcrdma_sendcq_process_wc: frmr ffff8810674024c0 (stale): WR flushed Jul 30 18:17:26 n001 kernel: RPC: rpcrdma_sendcq_process_wc: frmr ffff88106638a640 (stale): WR flushed Jul 30 18:19:26 n001 kernel: nfs: server 10.10.11.100 not responding, still trying Jul 30 18:19:36 n001 kernel: nfs: server 10.10.10.100 not responding, timed out Jul 30 18:19:38 n001 kernel: rpcrdma: connection to 10.10.11.100:20049 on mlx4_0, memreg 5 slots 32 ird 16 Jul 30 18:19:38 n001 kernel: nfs: server 10.10.11.100 OK Jul 31 14:42:08 n001 kernel: RPC: rpcrdma_sendcq_process_wc: frmr ffff8810671f02c0 (stale): WR flushed Jul 31 14:42:08 n001 kernel: RPC: rpcrdma_sendcq_process_wc: frmr ffff8810677bda40 (stale): WR flushed Jul 31 14:42:08 n001 kernel: RPC: rpcrdma_sendcq_process_wc: frmr ffff8810677bd940 (stale): WR flushed Jul 31 14:42:08 n001 kernel: RPC: rpcrdma_sendcq_process_wc: frmr ffff8810671f0240 (stale): WR flushed Jul 31 14:43:35 n001 kernel: rpcrdma: connection to 10.10.11.100:20049 on mlx4_0, memreg 5 slots 32 ird 16 Jul 31 15:01:53 n001 kernel: RPC: rpcrdma_sendcq_process_wc: frmr ffff881065133140 (stale): WR flushed Jul 31 15:01:53 n001 kernel: RPC: rpcrdma_sendcq_process_wc: frmr ffff8810666e3f00 (stale): WR flushed Jul 31 15:01:53 n001 kernel: RPC: rpcrdma_sendcq_process_wc: frmr ffff881063ea0dc0 (stale): WR flushed Jul 31 15:01:53 n001 kernel: RPC: rpcrdma_sendcq_process_wc: frmr ffff8810677bdb40 (stale): WR flushed Jul 31 15:03:05 n001 kernel: rpcrdma: connection to 10.10.11.100:20049 on mlx4_0, memreg 5 slots 32 ird 16 Jul 31 15:07:07 n001 kernel: RPC: rpcrdma_sendcq_process_wc: frmr ffff881060e59d40 (stale): WR flushed Jul 31 15:07:07 n001 kernel: RPC: rpcrdma_sendcq_process_wc: frmr ffff8810677efac0 (stale): WR flushed Jul 31 15:07:07 n001 kernel: RPC: rpcrdma_sendcq_process_wc: frmr ffff88106638a640 (stale): WR flushed Jul 31 15:07:07 n001 kernel: RPC: rpcrdma_sendcq_process_wc: frmr ffff8810671f03c0 (stale): WR flushed Jul 31 15:09:06 n001 kernel: rpcrdma: connection to 10.10.11.100:20049 on mlx4_0, memreg 5 slots 32 ird 16 Jul 31 15:16:09 n001 kernel: rpcrdma: connection to 10.10.11.100:20049 closed (-103) Jul 31 15:53:32 n001 kernel: nfs: server 10.10.10.100 not responding, timed out Jul 31 16:08:56 n001 kernel: nfs: server 10.10.10.100 not responding, timed out Jul 30 18:17:26 n002 kernel: RPC: rpcrdma_sendcq_process_wc: frmr ffff881064461500 (stale): WR flushed Jul 30 18:17:26 n002 kernel: RPC: rpcrdma_sendcq_process_wc: frmr ffff8810604b2600 (stale): WR flushed Jul 30 18:19:26 n002 kernel: nfs: server 10.10.11.100 not responding, still trying Jul 30 18:19:38 n002 kernel: rpcrdma: connection to 10.10.11.100:20049 on mlx4_0, memreg 5 slots 32 ird 16 Jul 30 18:19:38 n002 kernel: nfs: server 10.10.11.100 OK Jul 31 14:43:35 n002 kernel: rpcrdma: connection to 10.10.11.100:20049 closed (-103) Jul 31 16:08:56 n002 kernel: nfs: server 10.10.10.100 not responding, timed out Similar messages show up on the other clients n003-n009. After these messages on the clients, their load will continually go up (viewable through Ganglia) (I would guess since they are waiting for NFS mount to re-appear). They aren't reachable any longer through SSH and neither can root log in through console via IPMI web applet (just hangs after entering password, may get to prompt eventually but system load is so high), they need to be rebooted through IPMI interface. Here is /etc/fstab on the server, UUID=f15df051-ffb8-408c-8ad2-1987b6f082a2 / ext3 defaults 0 1 UUID=c854ee27-32cf-445d-8308-4e6f1a87d364 /boot ext3 defaults 0 2 UUID=b92a100f-2521-408b-9b15-93671c6ae056 swap swap defaults 0 0 UUID=a8a7b737-25ed-43a7-ae4b-391c71aa8c08 /data xfs defaults 0 2 UUID=d5692ec2-d5dc-4bb8-98d4-a4fb2ff54748 /projects xfs defaults 0 2 /dev/drbd0 /newwing xfs noauto 0 0 UUID=a305f309-d997-43ec-8e4f-78e26b07652f /working xfs defaults 0 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 I read that adding "inode64,nobarrier" for the xfs mount options may help? That is something I can try once the server can be rebooted. Here is current mounts on the server, /dev/sda3 on / type ext3 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw) /dev/sda1 on /boot type ext3 (rw) /dev/sdc1 on /data type xfs (rw) /dev/sdb1 on /projects type xfs (rw) /dev/sde1 on /working type xfs (rw,nobarrier) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) nfsd on /proc/fs/nfsd type nfsd (rw) /dev/drbd0 on /newwing type xfs (rw) Here is /etc/exports on the server, /data 10.10.10.0/24(rw,no_root_squash,async) /data 10.10.11.0/24(rw,no_root_squash,async) /data 150.x.x.192/27(rw,no_root_squash,async) /data 150.x.x.64/26(rw,no_root_squash,async) /home 10.10.10.0/24(rw,no_root_squash,async) /home 10.10.11.0/24(rw,no_root_squash,async) /opt 10.10.10.0/24(rw,no_root_squash,async) /opt 10.10.11.0/24(rw,no_root_squash,async) /projects 10.10.10.0/24(rw,no_root_squash,async) /projects 10.10.11.0/24(rw,no_root_squash,async) /projects 150.x.x.192/27(rw,no_root_squash,async) /projects 150.x.x.64/26(rw,no_root_squash,async) /tools 10.10.10.0/24(rw,no_root_squash,async) /tools 10.10.11.0/24(rw,no_root_squash,async) /usr/share/gridengine 10.10.10.10/24(rw,no_root_squash,async) /usr/share/gridengine 10.10.11.10/24(rw,no_root_squash,async) /usr/local 10.10.10.10/24(rw,no_root_squash,async) /usr/local 10.10.11.10/24(rw,no_root_squash,async) /working 10.10.10.0/24(rw,no_root_squash,async) /working 10.10.11.0/24(rw,no_root_squash,async) /working 150.x.x.192/27(rw,no_root_squash,async) /working 150.x.x.64/26(rw,no_root_squash,async) /newwing 10.10.10.0/24(rw,no_root_squash,async) /newwing 10.10.11.0/24(rw,no_root_squash,async) /newwing 150.x.x.192/27(rw,no_root_squash,async) /newwing 150.x.x.64/26(rw,no_root_squash,async) The 10.10.10.0/24 network is 1GbE and the 10.10.11.0/24 is the Infiniband. The other networks are also 1GbE. Our cluster nodes will normally mount all of these using the Infiniband with RDMA and the computation jobs will normally be using /working which will see the most reading/writing but /newwing, /projects, and /data are also used. Here is an /etc/fstab from the nodes, #NFS/RDMA #10.10.11.100:/opt /opt nfs rdma,port=20049 0 0 #10.10.11.100:/data /data nfs rdma,port=20049 0 0 #10.10.11.100:/tools /tools nfs rdma,port=20049 0 0 #10.10.11.100:/home /home nfs rdma,port=20049 0 0 #10.10.11.100:/usr/local /usr/local nfs rdma,port=20049 0 0 #10.10.11.100:/usr/share/gridengine /usr/share/gridengine nfs rdma,port=20049 0 0 #10.10.11.100:/projects /projects nfs rdma,port=20049 0 0 #10.10.11.100:/working /working nfs rdma,port=20049 0 0 #10.10.11.100:/newwing /newwing nfs rdma,port=20049 0 0 #NFS/IPoIB 10.10.11.100:/opt /opt nfs tcp 0 0 10.10.11.100:/data /data nfs tcp 0 0 10.10.11.100:/tools /tools nfs tcp 0 0 10.10.11.100:/home /home nfs tcp 0 0 10.10.11.100:/usr/local /usr/local nfs tcp 0 0 10.10.11.100:/usr/share/gridengine /usr/share/gridengine nfs tcp 0 0 10.10.11.100:/projects /projects nfs tcp 0 0 10.10.11.100:/working /working nfs tcp 0 0 10.10.11.100:/newwing /newwing nfs tcp 0 0 #NFS/TCP #10.10.10.100:/opt /opt nfs defaults 0 0 #10.10.10.100:/data /data nfs defaults 0 0 #10.10.10.100:/tools /tools nfs defaults 0 0 #10.10.10.100:/home /home nfs defaults 0 0 #10.10.10.100:/usr/local /usr/local nfs defaults 0 0 #10.10.10.100:/usr/share/gridengine /usr/share/gridengine nfs defaults 0 0 #10.10.10.100:/projects /projects nfs defaults 0 0 #10.10.10.100:/working /working nfs defaults 0 0 #10.10.10.100:/newwing /newwing nfs defaults 0 0 Here I can switch between different interfaces/protocols for the NFS mounts. Currently we are trying the IPoIB. We haven't started a cluster job yet so not sure how it will perform. With the NFS/TCP over 1GbE the server/nodes would hang from time to time but still did not crash at least, however was of course slow being limited by 1GbE. We haven't had this problem until recently. I upgraded our cluster to add the two additional nodes (n008 and n009) and we also added more storage to the server (/newwing and /working). The new nodes are AMD EPYC platform whereas the server and the nodes n001-n007 are Intel Xeon platform, not sure if that would cause such a crash. The new nodes were cloned from n001 and only kernel command line and network parameters were changed. The jobs are submitted to the cluster via Sun Grid Engine, and in total there are about 61 jobs that may start at once and open connections to the NFS server... it sounds like it is a system overload, although the load on the server remains low, under 10%, even as it hangs the load may increase to 80%. The server is a few years old but still has 2x 6-core Intel Xeon E5-2620 v2 @ 2.10GHz with 128GB of RAM. Would appreciate your assistance to troubleshoot this critical problem and, if needed, gather the required information to submit a bug to the tracker! Thanks, -- Chandler Arizona Genomics Institute www.genome.arizona.edu

1 1

Desktop lag with CentOS7/Mate and high CPU usage
by James Pearson 02 Aug '18

02 Aug '18

We have noticed significant desktop/UI lag on CentOS7 workstations using Mate when the CPU usage is high - i.e. the mouse pointer lags and moving windows (e.g. terminal windows) become jumpy (not smooth) We didn't see (or notice) this issue with CentOS6/Gnome2 This can easily be shown by running something like 'cpuburn' (https://patrickmn.com/projects/cpuburn/) and moving a mate-terminal window around the screen We can make things 'better' by running CPU intensive apps via 'nice' (without any noticeable performance hit to the CPU intensive app) - but this is a rather messy way of fixing the issue We can also make things better by renice'ing X to a negative nice level However, both these approaches seem wrong to me - as I'm probably missing something straightforward here Does anyone know of any CentOS7/Mate settings that could be used to improve desktop/UI responsiveness with high CPU usage ? Thanks James Pearson

5 5

Screensavers on Centos-7
by Fred Smith 02 Aug '18

02 Aug '18

Hi all! I keep having problems with screensaver(s) on Centos-7. I have in the past liked Xscreensaver, so I've installed it and tried to suppress whatever other screensaver is on the system. Xscreensaver works fine for a day or 20 then quits working. After a lengthy battle I gave up and removed it. I'm now trying mate-screensaver, which does the same thing! when I say "quits working" I mean just that. one night it goes to a black screen (as configured) then a minute or two later the power manager shuts off the screen. The next night it does neither, and forever after. Sometimes after a reboot it'll work again for a while then it starts misbehaving again. First question: Anybody have any similar issues? Anybody have any ideas on what's going on here and what I can do about it? So, not being in a position to reboot, last night I killed mate-screensaver and mate-powermanager, with the hopes the daemons would restart themselves. No such luck. so I tried to figure out what programs I could run to get them started again. So far I'm too stupid to be able to figure that out, as well. Second question: Anybody able to clue me in on how the screensavers and power managers are managed/started? there isn't a systemctl module for it, as far as I can see. if I run mate-screensaver from the commandline (as me, not root) I get no prompt back, so I assume it's running silently, but it also doesn't blank the screen at the specified time. So, thanks in advance for any assistance! -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- "Not everyone who says to me, 'Lord, Lord,' will enter the kingdom of heaven, but only he who does the will of my Father who is in heaven." ------------------------------ Matthew 7:21 (niv) -----------------------------

1 0

C7 Xfce group
by Robert Moskowitz 01 Aug '18

01 Aug '18

I am working with Centos-arm which right now only has the gnome and kde desktops. I am spoiled with using Xfce on all my Fedora systems (MUCH longer battery life on my notebook, for example). I like its simplicity. I see from messages here that mainline C7 does have the Xfce desktop. Can someone give me a list of rpms that make up the group, so I can try starting with the minimal image and see if I can build an Xfce desktop? Meanwhile I am going to put in a request for Xfce on the centos-arm list. thanks

2 3

Finding user's files
by mark 01 Aug '18

01 Aug '18

This is among the things we need to do when a user leaves, and it's a larger question than it sounds. Our Office has many servers, with a good number of fileservers for projects, with large filesystems (i.e. 10's of TB). Can anyone think of a way *other* than running what's probably a many-hour long find / -user on all our systems, which is really intensive, to find all the files own by a given user? Locate would be great, but from the man pages and what I can find online, it only stores filenames and paths. mark

4 4

Strange vncserver behavior
by Robert Moskowitz 01 Aug '18

01 Aug '18

I got vncserver working per: https://www.tecmint.com/install-and-configure-vnc-server-in-centos-7/ Then I went to set up a second instance, and have that for logging on to root: ========== cp /lib/systemd/system/vncserver@.service /etc/systemd/system/vncserver@:2.service vi /etc/systemd/system/vncserver@\:2.service replace <USER> with root systemctl daemon-reload systemctl start vncserver@:2 ========== I got the message: Job for vncserver@:2.service failed because a configured resource limit was exceeded. See "systemctl status vncserver@:2.service" and "journalctl -xe" for details. #systemctl -l status vncserver@:2.service ● vncserver@:2.service - Remote desktop service (VNC) Loaded: loaded (/etc/systemd/system/vncserver@:2.service; disabled; vendor preset: disabled) Active: failed (Result: resources) since Wed 2018-08-01 08:45:19 EDT; 1min 8s ago Process: 2267 ExecStart=/usr/sbin/runuser -l root -c /usr/bin/vncserver %i (code=exited, status=0/SUCCESS) Process: 2260 ExecStartPre=/bin/sh -c /usr/bin/vncserver -kill %i > /dev/null 2>&1 || : (code=exited, status=0/SUCCESS) Aug 01 08:45:14 localhost systemd[1]: Starting Remote desktop service (VNC)... Aug 01 08:45:19 localhost systemd[1]: PID file /home/root/.vnc/localhost:2.pid not readable (yet?) after start. Aug 01 08:45:19 localhost systemd[1]: Failed to start Remote desktop service (VNC). Aug 01 08:45:19 localhost systemd[1]: Unit vncserver@:2.service entered failed state. Aug 01 08:45:19 localhost systemd[1]: vncserver@:2.service failed. =========== And yet, I am able to connect to 5902! It is running. cat /root/.vnc/localhost:2.log shows: Xvnc TigerVNC 1.8.0 - built Apr 11 2018 21:04:25 Copyright (C) 1999-2017 TigerVNC Team and many others (see README.txt) See http://www.tigervnc.org for information on TigerVNC. Underlying X server release 11903000, The X.Org Foundation Wed Aug 1 08:45:16 2018 vncext: VNC extension running! vncext: Listening for VNC connections on all interface(s), port 5902 vncext: created VNC server for screen 0 Wed Aug 1 08:45:23 2018 ComparingUpdateTracker: 0 pixels in / 0 pixels out ComparingUpdateTracker: (1:nan ratio) Wed Aug 1 08:51:01 2018 Connections: accepted: 192.168.160.20::53318 SConnection: Client needs protocol version 3.8 SConnection: Client requests security type VeNCrypt(19) SVeNCrypt: Client requests security type TLSVnc (258) etc. ======== what is going on with systemctl? thanks

1 0

how to update python 2.7.5 to python 2.7.15 on centos 7.4
by qw 01 Aug '18

01 Aug '18

Hi, I have one question about python update. How to update python 2.7.5 to python 2.7.15 on centos 7.4? Thanks! Regards Andrew

2 1

CVE-2018-0495 Libgcrypt Vulnerability Fix for CentOS 6?
by nschehovin＠yahoo.com 01 Aug '18

01 Aug '18

Is there a schedule for fixing CVE-2018-0495 Libgcrypt Vulnerability for CentOS 6? I can not find a patch for this CVE. Please point me in the right direction if I am missing something. Thanks, Ed

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss