Discuss

discuss@lists.centos.org

34753 discussions

RE: [CentOS] Adaptec 29320
by Graham Johnston 06 Feb '07

06 Feb '07

We are using a Adaptec 39320A PCIe with a Dell PowerEdge 2950 server. Using with a Dell PowerVault tape changer and TSM. graham -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Bowie Bailey Sent: Tuesday, February 06, 2007 10:06 AM To: CentOS mailing list (E-mail) Subject: [CentOS] Adaptec 29320 I need a SCSI card to attach a tape library to my system. I am looking at the Adaptec 29320A-R. Can anyone confirm that this card will work with the stock CentOS 4 kernel? -- Bowie _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

Server Tutorials but written in Spanish
by Erick Perez 06 Feb '07

06 Feb '07

this message is mostly for the spanish speaking people on this list. To avoid reinventing the wheel, i was doing a google search for centos based server tutorials but in spanish. I found several things, but not much. I am looking for tutorials about: How to setup postfix with centos, dovecot, creating rpm, apache,bind I will teach some unix basics to my students (Oh God!) but I'm a lazy teacher and I don't want to write from scratch. Pointers for manuals will be gladly accepted (centos/rpm based). Otherwise, I will have to write 'em from scratch. thanks, -- ------------------------------------------------------------ Erick Perez Panama Sistemas Integradores de Telefonia IP y Soluciones Para Centros de Datos Panama, Republica de Panama Cel Panama. +(507) 6694-4780 ------------------------------------------------------------

3 2

Adaptec 29320
by Bowie Bailey 06 Feb '07

06 Feb '07

I need a SCSI card to attach a tape library to my system. I am looking at the Adaptec 29320A-R. Can anyone confirm that this card will work with the stock CentOS 4 kernel? -- Bowie

2 1

RE: [CentOS] qmail on CentOS 4.4
by Mark Schoonover 06 Feb '07

06 Feb '07

Jim Perrin wrote: >> IIRC correctly, this is the (in)famous errno problem. It requires a >> patch to put qmail at 1.03. Life with qmail has all the instruction >> you need to patch and install qmail. There's a script to do it all >> for you. Qmail is really straight forward provided you follow the >> install directions to the letter. Once you do, you'll have the best >> SMTP server running. > > *COUGH* > <flame war> > So... the patch upgrades qmail to postfix? > > /runs I am honored you commented on my post! :) Thanks! Mark Schoonover *** Winner of the 2008 Best Psychic Award IS Manager American Geotechnical - California, Nevada and Arizona V-> 858.450.4040 F-> 714.685.3909 C-> 858.472.3816

1 0

CODA or NFS
by Alexander Lopez 06 Feb '07

06 Feb '07

Hi Friends.. Well, I have setting OpenLDAP on CentOS 4.4 on a Blade Server.. I am trying of setting a cluster.. But I don't know that use: NFS or CODA.. What is you opinion?

3 2

clamd error
by Indunil Jayasooriya 06 Feb '07

06 Feb '07

Hi, I get the below error, while starting clamd. what's wrong with it? help is needeed. [root@worldnet clamav]# /etc/init.d/clamd start Starting Clam AntiVirus Daemon: LibClamAV Error: cli_cvdload(): Can't create temporary directory /var/tmp/clamav-25f631f5d9a7b846 LibClamAV Error: Can't load /var/clamav/main.cvd: Unable to create temporary directory ERROR: Unable to create temporary directory [FAILED] -- Thank you Indunil Jayasooriya

3 2

vsftp
by John Hinton 05 Feb '07

05 Feb '07

I'm having an odd behavior with vsftp on all CentOS 4 servers... maybe 3 too, but I'm not on those much. I am transferring in port mode as I've never managed to get passive to work with a firewall running. Anyway, this is what happens. During normal transfers with few files.. it works perfectly. During the transfer of like a large website with hundreds of files in various directories, from a fast connection, vsftp stalls out with a high degree of consistency. I thought this was happening only when I was doing this locally through the intranet, but I have now discovered our outside users are having the same problem when they are on a hi speed connection. Does anyone have any ideas as to why this is happening? Thanks, John Hinton

2 1

Problem with 2.6.11.4 kernel and e1000 driver
by Mark Hull-Richter 05 Feb '07

05 Feb '07

I get the following results when I try to load the 2.6.11.4 kernel with an Intel e1000 driver (the one that comes in the kernel source): 1) If I build it into the kernel, nothing shows up at all. 2) If I build it as a loadable module, I get errors on eth0 and eth1 that the MAC address is different than expected, and it ignores the controller. What's up with this? Thanks. mhr

1 0

KDE oops
by Ted Miller 05 Feb '07

05 Feb '07

I realize this may technically be "off topic", but I have made all the icons on my KDE desktop disappear. It is something in the KDE setup in my /home/tmiller/... setup, as my wife's icons work fine. It is probably the result of something I deleted or moved in moving my home directory from Mandriva 2006 to Centos 4. The files are all in /home/tmiller/Desktop, but they don't show up on the desktop. Neither do the device icons, or any other icons. I have the Configure-Desktop -> Behavior -> General -> Show icons on desktop box checked, but the don't show. I hope someone will recognize my problem and be able to help me with 10 seconds of typing. If no one knows what I have done I will quietly go looking for a KDE forum or mailing list to plead my case in. Ted Miller Indiana

1 0

Recommendations for Lexmark Z11 driver install?
by Bart Schaefer 05 Feb '07

05 Feb '07

I've "inherited" an old Lexmark Z11 and would like to plug it in to my CentOS 4 box as a second printer. I shut down, hooked it up to the parallel port, rebooted, and hwbrowser recognizes it on /dev/lp0, so I ran through setting it up as a queue with printconf-gui. However, printing the test page fails because the renderer "lz11.foomatic" is not found (details below for anyone who wants to read that far). A quick look at linuxprinting.org leads me to the lz11 project. I've downloaded lz11-V2-1.2 which contains lz11.foomatic, but after reading through the installer shell script I'm not exactly happy about what it's going to do to my rpm-based cups install (clobber files in the foomatic directories and drop a whole lot of utility scripts in /usr/bin, among other things). Any advice on how best to proceed would be appreciated: What's the least disruptive way to do the upgrade? As an aside, why does printconf-gui allow one to select a printer for which the driver is not installed? (Should lz11.foomatic be available from somewhere else, and I simply haven't installed all the right centos packages?) __________ Here's the rundown of what I've tried so far, starting with the log output when the test print fails: I [04/Feb/2007:20:33:06 -0800] Adding start banner page "none" to job 4. I [04/Feb/2007:20:33:06 -0800] Adding end banner page "none" to job 4. I [04/Feb/2007:20:33:06 -0800] Job 4 queued on 'Lexmark' by 'root'. I [04/Feb/2007:20:33:06 -0800] Started filter /usr/lib/cups/filter/pstops (PID 6400) for job 4. I [04/Feb/2007:20:33:06 -0800] Started filter /usr/lib/cups/filter/foomatic-rip (PID 6401) for job 4. E [04/Feb/2007:20:33:06 -0800] PID 6401 stopped with status 1! I [04/Feb/2007:20:33:06 -0800] Hint: Try setting the LogLevel to "debug" to find out more. I [04/Feb/2007:20:33:06 -0800] Saving printers.conf... If I look with "lpq" I find: Lexmark is not ready Rank Owner Job File(s) Total Size 1st root 4 testprint.ps 15360 bytes (Jobs 1-3 were previous failed attempts at printing the test page, which I deleted with lprm.) Any clues as to why "Lexmark is not ready"? "lpstat -a" says: Lexmark accepting requests since Jan 01 00:00 Obviously that date is a bit wacky. I tried "lpc": lpc> status Lexmark: printer is on device 'parallel' speed -1 queuing is enabled printing is enabled no entries daemon present So I rebooted again, and now lpc shows exactly the same but lpq says: Lexmark is ready no entries However, printing the test page still fails with exactly the same "stopped with status 1" error. (The printer remains "ready" now, even after the job fails.) So I set LogLevel debug as suggested and this appears to be the relevent part of the output: D [04/Feb/2007:21:45:18 -0800] [Job 6] renderer command: lz11.foomatic --papersize=letter --color=0 --inksaving=1 --resx=582 --resy=582 D [04/Feb/2007:21:45:18 -0800] [Job 6] renderer return value: 16777215 D [04/Feb/2007:21:45:18 -0800] [Job 6] renderer received signal: 16777215 D [04/Feb/2007:21:45:18 -0800] [Job 6] Process dying with "The renderer command line returned an unrecognized error code 16777215.", exit stat: 1 D [04/Feb/2007:21:45:18 -0800] [Job 6] The renderer command line returned an unrecognized error code 16777215. D [04/Feb/2007:21:45:18 -0800] [Job 6] D [04/Feb/2007:21:45:18 -0800] [Job 6] Closing renderer D [04/Feb/2007:21:45:18 -0800] [Job 6] KID3 exited with status 1 D [04/Feb/2007:21:45:18 -0800] [Job 6] Renderer exit stat: 1

1 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss