Discuss

discuss@lists.centos.org

2 participants
34758 discussions

RE: [CentOS] Apache problem
by Miskell, Craig 22 Jun '06

22 Jun '06

> I maintain 10 webservers which is used for add delivery using > PHP.sometimes > when the load is high my apache process suddenly dies & i > restart apache. > > > i find the following errors in my /var/log/messages/ > > server1 kernel: audit(1150892521.827:18474474): avc: denied { > write } for > pid=28135 comm="httpd" name="php-mmcache" dev=sda7 ino=2146317 > scontext=root:system_r:httpd_t > tcontext=system_u:object_r:var_t tclass=dir > > i think the above one is something related to selinux.so i > disabled selinux > stopped iptables & disabled firewall. > > /sbin/fixfiles restore > > but still i get the above error message in my /var/log/messages I would suggest that if you are still getting this message, then you haven't disabled selinux properly. Also, there should be no reason to stop/disable the firewall to stop these messages - I strongly recommend you re-enabled it ASAP. Craig ======================================================================= Attention: The information contained in this message and/or attachments from AgResearch Limited is intended only for the persons or entities to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipients is prohibited by AgResearch Limited. If you have received this message in error, please notify the sender immediately. =======================================================================

2 1

Back-leveling error?
by Robert Moskowitz 22 Jun '06

22 Jun '06

This is all related to my struggles with Asterfax and libtiff. I rpm -U to libtiff 3.8.2 and I am still having troubles. So I decided to go back to libtiff 3.6.1 (oh and libtiff-devel that seems to be a prerec). So after a bit of playing that did not seem to do anything, I figured out to: rpm -U --oldprogram libtiff-3.6.1-8.i386.rpm libtiff-devel-3.6.1-8.i386.rpm and this seemed to work: rpm -q libtiff libtiff-3.6.1-8 But now things seem to be even more 'broken' if possible. Did I do the backleveling the right way? How do I check?

2 1

Conflict installing openssl.i386 with openssl.x86_64 on a x86_64 system
by Kanwar Ranbir Sandhu 22 Jun '06

22 Jun '06

Hi Everyone, I've got a system running CentOS 4 x86_64 and have some i386 packages (e.g. Firefox) installed, too. I knew when I started out that this wasn't ideal, but worked nonetheless. And, so far, it has. I'm (and my client) are happy! A couple of days ago I updated the server from U2 to U3 (it's not a public system, and runs some critical software...U3 couldn't go in right away). Everything appeared to be going well until it came time to install the updates, when yum barfed: Transaction Check Error: file /usr/share/man/man1/asn1parse.1ssl.gz from install of openssl-0.9.7a-43.8 conflicts with file from package openssl-0.9.7a-43.8 file /usr/share/man/man1/nseq.1ssl.gz from install of openssl-0.9.7a-43.8 conflicts with file from package openssl-0.9.7a-43.8 file /usr/share/man/man1/s_client.1ssl.gz from install of openssl-0.9.7a-43.8 conflicts with file from package openssl-0.9.7a-43.8 file /usr/share/man/man1/s_server.1ssl.gz from install of openssl-0.9.7a-43.8 conflicts with file from package openssl-0.9.7a-43.8 file /usr/share/man/man1/sslpasswd.1ssl.gz from install of openssl-0.9.7a-43.8 conflicts with file from package openssl-0.9.7a-43.8 Looks like the x86_64 and i386 openssl packages install their man pages to the same location. I was able to complete the update after excluding openssl. I'm not sure how other packages handle this, but it looks like a bug. However, I found a mail list thread where Karanbir or Johnny (not sure which one) indicated that this had been fixed. Well, the update is not going in for me, so something is fubar. Anyone else dealing with this? Is there a workaround or fix I'm not aware of? I'd appreciate any pointers. Thanks, Ranbir -- Kanwar Ranbir Sandhu Linux 2.6.16-1.2111_FC4 i686 GNU/Linux 17:22:25 up 10:52, 3 users, load average: 0.67, 0.55, 0.55

4 7

PCI-X Sata Raid Controller
by Bryan Shelton 22 Jun '06

22 Jun '06

Does anyone have any suggested PCI-X Sata Raid Controllers which are natively supported in Centos 4.3, the 2.6 kernel. I guess either with the new megaraid or aacraid drivers? Thanks for the help, Bryan Shelton

2 2

can't change login screen resolution
by Paul 22 Jun '06

22 Jun '06

After boot up, on the login screen, I can't seem to find how to change the resolution. I've have it set at one resolution after login for all users, but still, the login screen remains the same. It's a bit annoying because I get a warning message from my monitor of incorrect settings and sometimes it wacks out. I think the refresh rate is what is causing it. Thanks.

2 3

Great news from the micro$soft front
by Michel 22 Jun '06

22 Jun '06

http://www.nl.datanewsjobs.be/news/20060621018 -- Facts are stuborn things

4 4

yum install nagios, adding dag repository
by karl＠klxsystems.net 22 Jun '06

22 Jun '06

Hi, I'm running an Opteron 64 bit server, and in an effort to re-join it to my nagios monitoring, I have tried the install nagios via Yum. When I type: yum install nagios, or nagios-nrpe, or nagios-plugins, I get: "Nothing to do". as output. In wanting to add the DAG repository to my machine, the documentation i've come across seems vague. Can someone advise me on either of these issues? I have come across the following HOWTO, but it kind of jumps around a bit, and the if/else logic is too hard to decipher. http://www.maxsworld.org/?page_id=115 Any help is most appreciated... -karlski

6 9

RE: [CentOS] SuperMicro X7DBE with CentOS4?
by Bowie Bailey 21 Jun '06

21 Jun '06

Joshua Baker-LePain wrote: > On Tue, 20 Jun 2006 at 5:53pm, Bowie Bailey wrote > > > Joshua Baker-LePain wrote: > > > > > > Is there any reason you're locked into Xeon/FB-DIMM? SuperMicro > > > makes many rather nice Opteron boards, with good ol' DDR SDRAM. > > > And there aren't many areas where Xeon outperforms Opteron these > > > days, if any. > > > > Not really, can you recommend a comparable Opteron MB? I need PCI-X > > 133 for the raid card, capability of at least 32MB RAM, and > > preferably onboard video and LAN. > > I'll assume you meant 32GB RAM. ;) In that case, your options > become a bit more limited. SM doesn't have any 2 socket Opteron > boards with 16 DIMM slots -- they have at most 4 slots/socket. So, > to stick with SM, you'd have to either go with 4GB sticks (which, I'm > guessing, may well be as pricy as FB-DIMM per GB) or go to a 4 socket > board. Either way, you may not get much cost savings, but you'll > still likely get a performance boost. Yea, 32GB... :) I can't actually find any 4GB modules at the moment, but I'm sure you're right. The 2GB PC2700 ECC-Reg modules are cheaper than the DDR2 ECC-FB modules, but 16GB memory still accounts for almost half of the total cost of the server. I'm only populating it with 16GB to start with, but I want to leave myself some headroom to increase it if needed. > The other option is to go with Tyan. They have the S3892, a dual > socket board with 16 DIMM slots. That looks like a good board. It seems to have everything I need. The only source I could find for it is memorylabs.com. Anyone know anything about them? Going with the dual Opteron 270 (2.0GHz) rather than the dual Xeon 5060 (3.2GHz) and the slightly cheaper RAM saves me about $320. > As an aside, 3ware now has a PCIe version (the 9590SE) in addition to > the PCI-X 9550. Any advantage to PCIe over PCI-X? I don't really know much about either other than that they are both faster than standard PCI. -- Bowie

2 1

yum and python. grief and grief. CentOS 4.3
by Dan Shidlovsky 21 Jun '06

21 Jun '06

Hello. Maybe after work with FreeBSD I become too spoilt, but I expect that packages from one distribution kit works among themselves well. But that I see: $ rpm -qa | grep rpm rpm-libs-4.3.13_nonptl rpm-python-4.3.13_nonptl rpm-4.3.13_nonptl rpm-build-4.3.13_nonptl $python >>> import rpm ImportError /usr/lib/librpm-4.3.so: undefined symbol: rpm_execcon Thanks.

9 29

Re: [CentOS] Appended 1 in fstab entries CentOS4.X installs
by cweisiger＠i-55.com 21 Jun '06

21 Jun '06

Im not dual booting nor triple booting. CentOS is the only OS on the system. I have have to format and reload. I just select the partitions re-name them back to / or /boot etc..and select to format with ext3 patition type. I dont actually select each partition and delete them then re-create them. I have always done this even in centos3 and I never had the problem in centos3. Matter of fact I installed a true RHEL4 install and it does the same thing, also same result of RHEL3 as in centos3.

2 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss