Discuss

discuss@lists.centos.org

2 participants
34758 discussions

Centos 3.6 - iscsi target issues
by Bruno Sousa 21 May '06

21 May '06

Hello, I'm running a server that needs to have a kernel 2.4.xxx. So now I'm running a CentOS 3.6 with kernel 2.4.21-37.0.1.ELsmp. Now, I want to make this server usable for ISCSI, so I started to install the ISCSI target, and the problems begin. If I try to install ISCSI version 0.4.13 from source code I got the following error : The present kernel configuration has modules disabled. Type 'make config' and enable loadable module support. Then build a kernel with module support enabled. This means that the CentOS kernel doesn't allow to insert modules? Sorry for perhaps being a lame question, but I can , and use, insmod all the time. Anyway, later on I found a src.rpm, so I give it a try. The file is http://www.digicola.com/developer/iscsitarget-0.4.12-6.src.rpm , and i i try to rebuild the rpm , with the command rpmbuild --rebuild iscsitarget-0.4.12-6.src.rpm it gives me the following error : error: Failed build dependencies: kernel-smp-devel = 2.4.21-37.0.1.EL is needed by iscsitarget-0.4.12-6 I searched a little and I installed the kernel-devel package.but it still doesn't work. If anyone could point me out some way to solve this, it would be very appreciated. Best regards, Bruno Sousa

2 4

sendmail config problem
by Paul R. Ganci 21 May '06

21 May '06

Recently my wife received an Email addressed from jdavidson4(a)home.com. When she tried to reply to the original message her reply bounced with ----- The following addresses had permanent fatal errors ----- <jdavidson4(a)home.com> (reason: 553 5.3.5 system config error) ----- Transcript of session follows ----- 553 5.3.5 home.com.nurdog.com. config error: mail loops back to me (MX problem?) 554 5.3.5 Local configuration error I started to do some digging and discovered that there is no MX record for home.com which is the ultimate reason my wife's message bounces. However what disturbs me is that given the lack of DNS MX record for home.com my Email server is tacking my domain name nurdog.com onto the original domain name and creating home.com.nurdog.com. I verified that this action is indeed occurring: # sendmail -bt -C./sendmail.cf ADDRESS TEST MODE (ruleset 3 NOT automatically invoked) Enter <ruleset> <address> > 3,0 jdavidson4(a)home.com canonify input: jdavidson4 @ home . com Canonify2 input: jdavidson4 < @ home . com > Canonify2 returns: jdavidson4 < @ home . com . nurdog . com . > canonify returns: jdavidson4 < @ home . com . nurdog . com . > parse input: jdavidson4 < @ home . com . nurdog . com . > Parse0 input: jdavidson4 < @ home . com . nurdog . com . > Parse0 returns: jdavidson4 < @ home . com . nurdog . com . > ParseLocal input: jdavidson4 < @ home . com . nurdog . com . > ParseLocal returns: jdavidson4 < @ home . com . nurdog . com . > Parse1 input: jdavidson4 < @ home . com . nurdog . com . > Mailertable input: < home . com . nurdog . com > jdavidson4 < @ home . com . nurdog . com . > Mailertable input: home . < com . nurdog . com > jdavidson4 < @ home . com . nurdog . com . > Mailertable input: home . com . < nurdog . com > jdavidson4 < @ home . com . nurdog . com . > Mailertable input: home . com . nurdog . < com > jdavidson4 < @ home . com . nurdog . com . > Mailertable returns: jdavidson4 < @ home . com . nurdog . com . > Mailertable returns: jdavidson4 < @ home . com . nurdog . com . > Mailertable returns: jdavidson4 < @ home . com . nurdog . com . > Mailertable returns: jdavidson4 < @ home . com . nurdog . com . > MailerToTriple input: < > jdavidson4 < @ home . com . nurdog . com . > MailerToTriple returns: jdavidson4 < @ home . com . nurdog . com . > Parse1 returns: $# esmtp $@ home . com . nurdog . com . $: jdavidson4 < @ home . com . nurdog . com . > parse returns: $# esmtp $@ home . com . nurdog . com . $: jdavidson4 < @ home . com . nurdog . com . > I run a second server that does not have this problem and this issue only seems to occur on domains with broken DNS. For example if I use an email address which comes with a working server I get: > 3,0 prg(a)cirrus.com canonify input: prg @ cirrus . com Canonify2 input: prg < @ cirrus . com > Canonify2 returns: prg < @ cirrus . com . > canonify returns: prg < @ cirrus . com . > parse input: prg < @ cirrus . com . > Parse0 input: prg < @ cirrus . com . > Parse0 returns: prg < @ cirrus . com . > ParseLocal input: prg < @ cirrus . com . > ParseLocal returns: prg < @ cirrus . com . > Parse1 input: prg < @ cirrus . com . > Mailertable input: < cirrus . com > prg < @ cirrus . com . > Mailertable input: cirrus . < com > prg < @ cirrus . com . > Mailertable returns: prg < @ cirrus . com . > Mailertable returns: prg < @ cirrus . com . > MailerToTriple input: < > prg < @ cirrus . com . > MailerToTriple returns: prg < @ cirrus . com . > Parse1 returns: $# esmtp $@ cirrus . com . $: prg < @ cirrus . com . > parse returns: $# esmtp $@ cirrus . com . $: prg < @ cirrus . com . > This obvious thing to try was to remove FEATURE(always_add_domain), run m4 and restart sendmail but that had no effect. I am not that concerned about this problem, but for the life of me googling and comparing the config files between my two Email servers does not indicate anthing obvious to me to cause this behavior. Does anyone have an idea to which sendmail config parameter might be causing nurdog.com to get tacked onto home.com in these circumstances? Thanks for any ideas. -- Paul (ganci(a)nurdog.com)

2 6

mysql : Access denied for user
by kenkensmile＠netscape.net 20 May '06

20 May '06

Hi all, I am having a problem with mysql. I set up root password set password for root@localhost=password('xxxxxxxxx'); set password for root@'xxx.yyyy.com'=password('yyyyyyyy'); after that I tried to log in, but mysql says ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES) I guess that I had the right password. My friend told me that I might have used a wrong password, so I set up new password for root. However, mysql says the exactly same thing!! ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES) I was not sure about the error, so I decided to remove mysql and deleted /var/lib/mysql. After that I reinstalled mysql and set up mysql again. However, mysql again says ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES) I am 100000% sure that I am using the right passward for root I am quite puzzled by the error and need your help. Does anyone know how I can fix this problem? I am using CentOS4.3. Thank you for your help. Cheers, Joe ___________________________________________________ Try the New Netscape Mail Today! Virtually Spam-Free | More Storage | Import Your Contact List http://mail.netscape.com

7 11

Centos 4.3 and Card Reader
by Ralph Alvy 20 May '06

20 May '06

CentOS 4.3 (fully updated, including CentOS Plus kernel). Running KDE 3.5.2 (fully updated from redhat.kde repo). I can't seem to get the OS to recognize my SD card when inserted into my USB card reader. Mepis 6 Beta 3 has no problem with it. DMESG sees nothing happening when the card is inserted. USB-STORAGE module is loaded.

5 15

Re: Centos/RHEL with MGE UPS Protection Centers (usb)
by J.J.Garcia 20 May '06

20 May '06

OPENSOURCE wrote: > > I hope this answer your questions, and I hope you're ready to wait a bit > more. > Sure, NP for me, thanks for the feedback Arnaud. I have to admit that past days im having the syslog with a lil more activity from the new usb attached unit (ellipse ASR 1000 VA) Network UPS Tools: New USB/HID UPS driver 0.23 (2.0.2-pre2) Detected an UPS: MGE UPS SYSTEMS/ELLIPSE usb 3-1: control timeout on ep0in usb 3-1: usbfs: USBDEVFS_CONTROL failed cmd newhidups rqt 161 rq 1 len 10 ret -110 usb 3-1: usbfs: USBDEVFS_CONTROL failed cmd newhidups rqt 161 rq 1 len 10 ret -32 usb 3-1: usbfs: process 3225 (newhidups) did not claim interface 0 before use usb 3-1: usbfs: USBDEVFS_CONTROL failed cmd newhidups rqt 161 rq 1 len 10 ret -32 usb 3-1: usbfs: process 3225 (newhidups) did not claim interface 0 before use usb 3-1: usbfs: USBDEVFS_CONTROL failed cmd newhidups rqt 161 rq 1 len 10 ret -32 usb 3-1: usbfs: process 3225 (newhidups) did not claim interface 0 before use usb 3-1: usbfs: USBDEVFS_CONTROL failed cmd newhidups rqt 161 rq 1 len 10 ret -32 usb 3-1: usbfs: process 3225 (newhidups) did not claim interface 0 before use usb 3-1: usbfs: USBDEVFS_CONTROL failed cmd newhidups rqt 161 rq 1 len 10 ret -32 usb 3-1: usbfs: process 3225 (newhidups) did not claim interface 0 before use Is this important? BTW im still able to do upsc commands: [root@sparkbox log]# upsc mgeups@localhost battery.charge: 100 battery.charge.low: 30 battery.runtime: 1981 driver.name: newhidups driver.parameter.port: auto driver.version: 2.0.2-pre2 driver.version.data: MGE HID 0.7 driver.version.internal: 0.23 input.transfer.high: 264.0 input.transfer.low: 184.0 outlet.0.desc: Main Outlet outlet.0.id: 1 outlet.0.switchable: 0 outlet.1.desc: PowerShare Outlet 1 outlet.1.id: 2 outlet.1.switch: 1 outlet.1.switchable: 0 output.voltage: 230.0 ups.delay.shutdown: -1 ups.delay.start: -10 ups.load: 20 ups.mfr: MGE UPS SYSTEMS ups.model: Ellipse 1000 ups.power.nominal: 1000 ups.serial: 1H7G0602E ups.status: OL CHRG TIA Jose.

1 0

haldaemon crashes system?
by Josh Kelley 19 May '06

19 May '06

I'm in the process of setting up CentOS 4.3 on an old 400MHz K6 and found that the system hangs within several seconds of starting haldaemon. With haldaemon disabled, everything seems to work. >From what I've read, disabling haldaemon isn't a problem, but I thought I'd ask if anyone else has seen similar problems or if anyone had any troubleshooting tips. I found a similar issue at https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=178236, although it doesn't sound quite the same. Should I log a bug at Red Hat's Bugzilla? Or at CentOS's bug site? Or is it even worth trying to track down a bug on hardware this old? Josh Kelley

2 2

yum grouplist error
by Alfred von Campe 19 May '06

19 May '06

I keep a local copy of the yum repository using rsync every night. Commands like "yum update" still work, but lately I've been getting the following error: # yum grouplist Setting up Group Process Setting up repositories Error: Caching enabled and local cache: //var/cache/yum/base/ yumgroups.xml does not match checksum My nightly rsync cron job doesn't update this file -- should it? How does one rebuild it? To set up my local repository, I edited the file /etc/yum.repos.d/CentOS-Base.repo and changed all baseurl entries to use file:///path/to/my/repo instead of http:// mirror.centos/org/... Do I have something misconfigured? Thanks, Alfred

3 4

Visio
by Chris Peikert 19 May '06

19 May '06

Anyone know of an Open Source software comparable to Microsoft Visio?

3 4

Setting default paper size in OpenOffice
by Niki Kovacs 19 May '06

19 May '06

Hi, I'm using the default OpenOffice.org that ships with CentOS 4.3. In OO, I launch "Printer configuration" and set the default paper size from "US Letter" to "A4". OK, and then OK again. But the settings don't seem to be saved, they revert to US Letter every time, which is rather annoying, as I don't set this up for me (but for a bunch of Joe Users), and I can't expect them to manually configure the paper size everytime they want to print something. Any suggestions? Niki Kovacs

1 0

RE: [CentOS] Visio
by Andrew Elliott 19 May '06

19 May '06

Good Afternoon, There's "Dia": http://www.gnome.org/projects/dia/ if you're gnome Also, there's "DiaCanvas" which I guess is similar (never used it): http://sourceforge.net/projects/diacanvas/ And of course kivio: http://www.koffice.org/kivio/ if you're a kde fan.... Andrew Elliott Network Services Computar Services Inc. 2191 Thurston Drive Ottawa, Ontario K1G 6C9 Tel: (613) 482-8374 Fax: (613) 737-3611 Email: andrewe(a)computar.ca ________________________________ From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Chris Peikert Sent: Friday, May 19, 2006 11:59 AM To: 'CentOS mailing list' Subject: [CentOS] Visio Anyone know of an Open Source software comparable to Microsoft Visio?

2 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss