Discuss

discuss@lists.centos.org

2 participants
34758 discussions

Re: [CentOS] Protectbase Plugin not working?
by Kai Schaetzl 08 May '06

08 May '06

Daniel de Kok wrote on Sun, 07 May 2006 23:24:56 +0200: > I have attached the plugin gzipped. The instructions for enabling the > plugin are at the top of the file. The default priority for repositories > is 99, a lower number is a higher priority. So far seems to be okay, lists at the moment the same as with protectbase since only the packages are left for updating that aren't in any repo. Kai -- Kai Schätzl, Berlin, Germany Get your web at Conactive Internet Services: http://www.conactive.com

2 3

X86_64, Groupinstall KDE fails
by Benjamin Smith 08 May '06

08 May '06

I have an Athlon/64, 1 GB RAM, 80 GB IDE system and I'm intending to use it for combination workstation/Dev server duties. I've gotten a consistent failure when I try to groupinstall KDE. After grinding through all the deps, it comes up with the below: Install 228 Package(s) Update 0 Package(s) Remove 0 Package(s) Total download size: 331 M Is this ok [y/N]: y Downloading Packages: Running Transaction Test Finished Transaction Test Transaction Check Error: file /usr/share/man/man1/asn1parse.1ssl.gz from install of openssl-0.9.7a-43.8 conflicts with file from package openssl-0.9.7a-43.8 file /usr/share/man/man1/nseq.1ssl.gz from install of openssl-0.9.7a-43.8 conflicts with file from package openssl-0.9.7a-43.8 file /usr/share/man/man1/s_client.1ssl.gz from install of openssl-0.9.7a-43.8 conflicts with file from package openssl-0.9.7a-43.8 file /usr/share/man/man1/s_server.1ssl.gz from install of openssl-0.9.7a-43.8 conflicts with file from package openssl-0.9.7a-43.8 file /usr/share/man/man1/sslpasswd.1ssl.gz from install of openssl-0.9.7a-43.8 conflicts with file from package openssl-0.9.7a-43.8 file /usr/share/man/man5/fonts-conf.5.gz from install of fontconfig-2.2.3-7 conflicts with file from package fontconfig-2.2.3-7 It appears that packages openssl and fontconfig are conflicting with themselves! (?!?) This is a clean, minimal install of CentOS 4.3/64, (installed with all optional packages unchecked, so only disk 1 was needed) I haven't even done a yum update, but that doesn't change anything when I try it. (I've now wiped it twice to try to figure out what I'm missing. Both packages are already installed, with the versions complained about... I've tried running rpm --rebuilddb, and yum clean all to no positive change. What's going on here? What can I try from here? -Ben -- "The best way to predict the future is to invent it." - XEROX PARC slogan, circa 1978

11 19

differences between yum update and yum check-update
by Kai Schaetzl 08 May '06

08 May '06

yum check-update: clamav.i386 0.88.1-1.el4.kb kbs-CentOS-Extra clamav-data.i386 0.88.1-1.el4.kb kbs-CentOS-Extra clamav-lib.i386 0.88.1-1.el4.kb kbs-CentOS-Extra clamav-update.i386 0.88.1-1.el4.kb kbs-CentOS-Extra yum update: Installing: clamav-db i386 0.88.2-1.el4.rf rpmforge 4.0 M replacing clamav-update.i386 0.88-1.el4.kb Updating: clamav i386 0.88.1-1.el4.kb kbs-CentOS-Extras 545 k clamav-lib i386 0.88.1-1.el4.kb kbs-CentOS-Extras 143 k Updating for dependencies: clamav-data i386 0.88.1-1.el4.kb kbs-CentOS-Extras 3.4 M The installed clam rpms on this machine are from kbs-CentOS-Extras (which is protected=1 while rpmforge/dag is not!) I think not only should the replacement not happen if the replaced rpm/repo is protected, there should also be no difference between update and check-update! A bug in yum? Kai -- Kai Schätzl, Berlin, Germany Get your web at Conactive Internet Services: http://www.conactive.com

3 14

Changing mount point - 4.3
by Tom Brown 08 May '06

08 May '06

Hi A box was installed with the majority of the free space in /home but i actually want this to be available to /opt. My fstab had /home looking like this LABEL=/home /home ext3 defaults 1 2 I umounted /home and changed the fstab to look like this /dev/sda5 /opt ext3 defaults 1 2 and then mounted /opt. All works fine. My question is, is this the 'correct' way to do something like this or should i stick to 'LABEL' ? I wonder as i'm not sure where the label tag gets set and when i see the box boot now it still references /home when in reality it is /opt on sda5. Is this a really bad thing to do? thanks

4 4

Sata driver support
by PV Juliet 08 May '06

08 May '06

Hi, I want to compile the kernel for supermicro server . I need the SATA controller support(adp94xx.o). Where i can get the source code of linux kernel 2.6.9 with the support of above mentioned driver ?? Thanks in advance Regards juliet

2 1

Re: Centos/RHEL with MGE UPS Protection Centers (usb)
by J.J.Garcia 08 May '06

08 May '06

comments online, > > The problem with this howto is that the shutdown process will NOT > work as expected. (This is why I ccd you, J.J.Garcia). (See below) > > Thanks a lot Antoine for the feedback, my fault for not checking a full shutdown with newhidups as i used to do with the serial-line models! i was hopping that the new second unit i bought (usb one) work fine as the old serial i previously had :( > > I ended up modifying the fedora rpms to add those hotplug files so > that newhidups works as expected. The source rpm can be found here: > http://www.gymglish.com/opensource/rpms/centos4-rpms/nut-2.0.2-2brx.src.rpm > but it would be nice to have those hotplug files directely in the nut > fedora > rpm, since they are in the nut package. > At this point, and having that mgups guys should also include /etc/issue detection for CentOs during mgeups install (as Arnaud told me in the past) i raise a question: Are they going to include a new release in the mgeups repository for RH based systems? I don't know how this kind of 3rd party pkgs are integrated in the main stream and at the same time im not the one to tell how to do it but just to clarify this now having you release the new rpm. I would like to know the feedback from CentOs maintainers as well. > > I use the following /sbin/halt.local script now, and my shutdown process > works fine: > > ############BEGIN################## > #!/bin/bash > > if [ -f /etc/killpower ] ; then > # if USB is already disabled, re-enable it. (needed by newhidups) > if [ ! -f /proc/bus/usb/devices ]; then > echo "Mounting USB filesystem" > mount -t usbfs usbfs /proc/bus/usb > fi > # newhidups is dynamically linked to libusb in /usr > if [ ! -d /usr/lib ]; then > echo "Mounting /usr filesystem read only" > mount -o ro /usr > fi > # newhidups wants to go into /var/run > if [ ! -d /var/run ]; then > echo "Mounting /var filesystem read only" > mount -o ro /var > fi > > # hotplugging is probably off, so run driver as -u root > echo "Killing the power, bye!" > /sbin/newhidups -u root -k mgeups > sleep 20 > > # uh oh... the UPS power-off failed > # you probably want to reboot here so you don't get stuck! > # *** see the section on power races in shutdown.txt! *** > echo "Killing the power failed ! (/sbin/halt.local)" > sleep 20 > echo "Rebooting." > reboot > fi > ##################END########################## > > > I am pretty happy with the MGE Protection Center UPS hardware, > but the integration with Centos/RHEL is pretty bad currently, > and this is a shame. I hope my post will make things easier for > new users and in the future. > I agree with that and also i think MGE ppl have affordable hardware with good facilities to check the status of these units (really dont know how many people are using this units but i think there should be a lot, my company is using several units also) and integration with RHEL and based systems IMHO could be better. Again, thanks a lot for you hints Antoine Salut vieux poilu! :) Jose

1 0

centos and libesmtp.h
by Erick Perez 08 May '06

08 May '06

Hi, Im compiling dansguardian with the clamav patch, but it needs libesmtp.h and i can't seem to find the rpm for centos or rh4 comments? -- ------------------------------------------- Erick Perez Linux User 376588 http://counter.li.org/ (Get counted!!!) Panama, Republic of Panama

2 1

Protectbase Plugin not working?
by Camron W. Fox 07 May '06

07 May '06

Alle, I have installed and enabled (I think) the yum protectbase plugin: [cwfox@lurker ~]$ rpm -qa | grep -i protectbase yum-plugin-protectbase-1.1-1.c4 [cwfox@lurker ~]$ cat /etc/yum/pluginconf.d/protectbase.conf [main] enabled = 1 [cwfox@lurker ~]$ grep plugin /etc/yum.conf plugins=1 [cwfox@lurker ~]$ cat /etc/yum.repos.d/CentOS-Base.repo <SNIP> [base] name=CentOS-$releasever - Base mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch… #baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/ gpgcheck=1 gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-centos4 protect=1 </SNIP> However, when I do yum check-update as in the following example, there are zero package exclusions and the Dag repo package for rsync (which is a CentOS base package, I believe) is listed: [cwfox@lurker ~]$ sudo yum check-update --enablerepo=dag rsync Loading "protectbase" plugin Loading "fastestmirror" plugin Setting up repositories Loading mirror speeds from cached hostfile Reading repository metadata in from local files 0 packages excluded due to repository protections rsync.i386 2.6.8-1.el4.rf dag [cwfox@lurker ~]$ rpm -qi rsync Name : rsync Relocations: /usr Version : 2.6.3 Vendor: CentOS Release : 1 Build Date: Mon Feb 21 07:16:46 2005 Install Date: Wed Aug 10 14:28:27 2005 Build Host: guru.build.karan.org Group : Applications/Internet Source RPM: rsync-2.6.3-1.src.rpm Size : 262544 License: GPL Signature : DSA/SHA1, Sat Feb 26 11:37:08 2005, Key ID a53d0bab443e1821 Packager : Karanbir Singh <kbsingh(a)centos.org> Summary : A program for synchronizing files over a network. Shouldn't this package from the Dag repository be on the exclusion list or am I misunderstanding the way protectbase is supposed to work? Best Regards, Camron -- Camron W. Fox Hilo Office High Performance Computing Group Fujitsu America, INC. E-mail: cwfox(a)us.fujitsu.com

5 16

How to print
by centos＠911networks.com 07 May '06

07 May '06

How can I print, from the command line, a png file? -- Thanks

4 6

Troubleshooting "too many open files'
by Michael Rock 07 May '06

07 May '06

Hi, Besides file-max and file-nr is there anywhere else I should be looking to solve a C program giving me 'too many open files' problem? (centos 3.4) While the program is complaining here were the values file-max 209632 file-nr 3655 258 209632 lsof | wc -l around 7000 during and about 1111 less after I closed the application. Any ideas? thx __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

3 2

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss