Discuss

discuss@lists.centos.org

2 participants
34758 discussions

Migrate from RHAS 4 to CentOS 4.2
by Jason Dixon 04 May '06

04 May '06

I have a SGI Altix 350 (ia64) that came with RHAS 4, but without any paid support. I would like to migrate the server over to CentOS. Here is what I've pieced together from some older posts by Johnny, can someone confirm this should work? I know this is somewhat covered in the FAQ, although both entries refer to FC or WBEL, which already have built-in yum support. Install the following files: http://vault.centos.org/4.2/os/ia64/CentOS/RPMS/ yum-2.4.0-1.centos4.noarch.rpm http://vault.centos.org/4.2/os/ia64/CentOS/RPMS/centos- release-4-2.1.ia64.rpm http://vault.centos.org/4.2/os/ia64/CentOS/RPMS/centos- yumconf-4-4.3.noarch.rpm Edit /etc/yum.conf and perform a "yum update". Thanks, -- Jason Dixon DixonGroup Consulting http://www.dixongroup.net

4 4

Oprofile in unsupported kernel?
by Dave Hatton 04 May '06

04 May '06

I'm currently looking at oprofile. I see its configured in for the standard kernel but not for unsupported. Any reason? Could this be changed? (Guess I could build my own - just hoping to avoid it) TIA Daveh

1 0

Possible to cause Yum to "reload" packages a second time?
by Barry L. Kline 04 May '06

04 May '06

I wrote in a thread entitled "ip_conntrack_ftp fails to load on CentOS4.3" that I had what I considered to be a borked upgrade, using yum update. When I went from 4.2 -> 4.3 I ceased to be able to use the ip_conntrack_ftp module, thus cutting off my users from ftp access. What I'd like to do is get yum to rerun its update procedure, which should allow any post processing that failed to complete properly to do so. I'm hoping that will add whatever missing piece is causing me the grief. What I haven't found in my reading is any way to get this to occur. Yum insists that nothing needs to be updated, and the logs seem to show it. Yet here I am with the one server that actually needs to have ftp access, without it. Things were working fine until the fateful yum update run. I've considered using rpm -F to refresh the files, but from what I can see that won't work. The switch only causes existing packages to be updated. I just don't see any switches in rpm or yum that will enable me to do what I want to attempt. Does anyone know of a wait to cajole yum to do my bidding? Thanks! Barry

5 9

CentOS-announce Digest, Vol 15, Issue 1
by centos-announce-request＠centos.org 04 May '06

04 May '06

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2006:0420 Moderate CentOS 3 i386 ethereal - security update (Tru Huynh) 2. CESA-2006:0420 Moderate CentOS 3 x86_64 ethereal - security update (Tru Huynh) 3. CESA-2006:0283 Moderate CentOS 3 i386 squirrelmail - security update (Tru Huynh) 4. CESA-2006:0283 Moderate CentOS 3 x86_64 squirrelmail - security update (Tru Huynh) 5. CESA-2006:0280 Moderate CentOS 4 ia64 dia - security update (Pasi Pirhonen) 6. CESA-2006:0283 Moderate CentOS 4 ia64 squirrelmail - security update (Pasi Pirhonen) 7. CESA-2006:0420 Moderate CentOS 4 ia64 ethereal - security update (Pasi Pirhonen) 8. CESA-2006:0283 Moderate CentOS 3 ia64 squirrelmail - security update (Pasi Pirhonen) 9. CESA-2006:0420 Moderate CentOS 3 ia64 ethereal - security update (Pasi Pirhonen) 10. CESA-2006:0280 Moderate CentOS 4 axp dia - security update (Pasi Pirhonen) 11. CESA-2006:0420 Moderate CentOS 4 axp ethereal - security update (Pasi Pirhonen) 12. CESA-2006:0283 Moderate CentOS 4 axp squirrelmail - security update (Pasi Pirhonen) 13. CESA-2006:0280 Moderate CentOS 4 s390(x) dia - security update (Pasi Pirhonen) 14. CESA-2006:0283 Moderate CentOS 4 s390(x) squirrelmail - security update (Pasi Pirhonen) 15. CESA-2006:0283 Moderate CentOS 3 s390(x) squirrelmail - security update (Pasi Pirhonen) 16. CESA-2006:0420 Moderate CentOS 4 i386 ethereal - security update (Johnny Hughes) 17. CESA-2006:0420 Moderate CentOS 4 x86_64 ethereal - security update (Johnny Hughes) 18. CESA-2006:0283 Moderate CentOS 4 x86_64 squirrelmail - security update (Johnny Hughes) 19. CESA-2006:0283 Moderate CentOS 4 i386 squirrelmail - security update (Johnny Hughes) 20. CESA-2006:0280 Moderate CentOS 4 x86_64 dia - security update (Johnny Hughes) 21. CESA-2006:0280 Moderate CentOS 4 i386 dia - security update (Johnny Hughes) 22. CESA-2006:0280-01: Moderate CentOS 2 i386 dia security update (John Newbigin) 23. CESA-2006:0420-01: Moderate CentOS 2 i386 ethereal security update (John Newbigin) 24. CESA-2006:0420 Moderate CentOS 4 s390(x) ethereal - security update (Pasi Pirhonen) 25. CESA-2006:0420 Moderate CentOS 3 s390(x) ethereal - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Wed, 3 May 2006 19:41:25 +0200 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2006:0420 Moderate CentOS 3 i386 ethereal - security update To: centos-announce(a)centos.org Message-ID: <20060503174125.GA23268(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2006:0420 ethereal security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2006-0420.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/ethereal-0.99.0-EL3.2.i386.rpm updates/i386/RPMS/ethereal-gnome-0.99.0-EL3.2.i386.rpm source: updates/SRPMS/ethereal-0.99.0-EL3.2.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update ethereal\* Tru -- Tru Huynh (CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

RE: [CentOS] Re: [CentOS-announce] CESA-2006:0420 Moderate CentOS 4s390(x) ethereal - security update
by King, John (Greg) (LMIT-HOU) 04 May '06

04 May '06

FYI the intial .99 version breaks revolving capture queues. http://bugs.ethereal.com/bugzilla/show_bug.cgi?id=895 The author released a fix for this (pretty quickly too) but I am unsure if RedHat applied the latest CVS fixes (SVN 18032) to this update or not. So if you have any recorders setup like this you may be in for a surprise. -Greg > -----Original Message----- > From: centos-bounces(a)centos.org > [mailto:centos-bounces@centos.org] On Behalf Of Joe Klemmer > Sent: Wednesday, May 03, 2006 10:45 PM > To: centos(a)centos.org > Subject: [CentOS] Re: [CentOS-announce] CESA-2006:0420 > Moderate CentOS 4s390(x) ethereal - security update > > On Thu, 2006-05-04 at 06:34 +0300, Pasi Pirhonen wrote: > > > CentOS Errata and Security Advisory 2006:0420 > > > > https://rhn.redhat.com/errata/RHSA-2006-0420.html > > > > The following updated files have been uploaded and are currently > > syncing to the mirrors: > > > > s390: > > updates/s390/RPMS/ethereal-0.99.0-EL4.2.s390.rpm > > updates/s390/RPMS/ethereal-gnome-0.99.0-EL4.2.s390.rpm > > > > s390x: > > updates/s390x/RPMS/ethereal-0.99.0-EL4.2.s390x.rpm > > updates/s390x/RPMS/ethereal-gnome-0.99.0-EL4.2.s390x.rpm > > Might not there be a way to separate out these announcements by > architecture? As it stands now there's 5 or 6 messages for the same > update. > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos >

1 0

Re: [CentOS-announce] CESA-2006:0420 Moderate CentOS 4 s390(x) ethereal - security update
by Joe Klemmer 04 May '06

04 May '06

On Thu, 2006-05-04 at 06:34 +0300, Pasi Pirhonen wrote: > CentOS Errata and Security Advisory 2006:0420 > > https://rhn.redhat.com/errata/RHSA-2006-0420.html > > The following updated files have been uploaded and are currently > syncing to the mirrors: > > s390: > updates/s390/RPMS/ethereal-0.99.0-EL4.2.s390.rpm > updates/s390/RPMS/ethereal-gnome-0.99.0-EL4.2.s390.rpm > > s390x: > updates/s390x/RPMS/ethereal-0.99.0-EL4.2.s390x.rpm > updates/s390x/RPMS/ethereal-gnome-0.99.0-EL4.2.s390x.rpm Might not there be a way to separate out these announcements by architecture? As it stands now there's 5 or 6 messages for the same update.

2 1

cdrecord issues
by Craig White 04 May '06

04 May '06

I have an issue with cdrecord though and I can't figure it out. I use Webmin, which basically just creates an iso and then uses cdrecord to burn it and it worked fine with previously installed CentOS 4 (I wiped and reinstalled about 8 months ago). This is the command that Webmin tries to execute... cdrecord -v dev=0,0,0 speed=4 -isosize \ '/home/Linux/CentOS-4/CentOS-4.2-i386-bin4of4.iso' The result of cdrecord -scanbus at bottom of email. Log of error just below. Help appreciated... Craig cdrecord: No write mode specified. cdrecord: Asuming -tao mode. cdrecord: Future versions of cdrecord may have different drive dependent defaults. cdrecord: Continuing in 5 seconds... scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 cdrecord: No such file or directory. Cannot open '/dev/pg0'. Cannot open SCSI driver. cdrecord: For possible targets try 'cdrecord -scanbus'. cdrecord: For possible transport specifiers try 'cdrecord dev=help'. Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 JÃ¶rg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM # cdrecord -scanbus Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla Note: The author of cdrecord should not be bothered with problems in this version. scsidev: 'ATA' devname: 'ATA' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Using libscg version 'schily-0.8'. cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling'). scsibus0: 0,0,0 0) 'COMBI ' 'RW16x10/DVD ' 'H1.1' Removable CD-ROM 0,1,0 1) * 0,2,0 2) * 0,3,0 3) * 0,4,0 4) * 0,5,0 5) * 0,6,0 6) * 0,7,0 7) *

11 16

RE: [CentOS] Starting tomcat on bootup
by Todd Reed 03 May '06

03 May '06

That was it! I didn't have the chkconfig: line... Thanks. -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Nick Sent: Tuesday, May 02, 2006 10:32 PM To: CentOS mailing list Subject: Re: [CentOS] Starting tomcat on bootup Barry Brimer wrote: >> I just installed Tomcat and when I run the chkconfig -add tomcat, it >> tells >> me that tomcat does not support chkconfig. > > In order to support chkconfig, an init script must: > 1. Be located in /etc/rc.d/init.d (which /etc/init.d is a symlink to) > 2. Have a commented out line that contains "chkconfig: <default > runlevels for this service> <start priority> <stop priority>" > 3. Have a commented out line that contains "description: <a > description of the service>" > 4. Upon successful service startup, place a lock file in > /var/lock/subsys that matches the name of the service script. Upon > successful service shutdown, the lockfile must be removed. > > It is worth noting that you must use "chkconfig --add <service name>" > in order to have the service script placed in the shutdown/restart > runlevels correctly. > > There are many great examples already provided by existing services. > They should be fairly straightforward reading. Here's the init script we use, if it helps at all: #!/bin/sh # # Tomcat Server # # chkconfig: 345 96 30 # description: Java servlet container JAVA_HOME=/opt/jdk PATH=${JAVA_HOME}/bin:${PATH} TOMCAT_START=/opt/tomcat/bin/startup.sh TOMCAT_STOP=/opt/tomcat/bin/shutdown.sh export JAVA_HOME PATH start() { if [ -x ${TOMCAT_START} ]; then echo "Starting tomcat server..." ${TOMCAT_START} & else echo "Cannot start tomcat server" fi } stop() { if [ -x ${TOMCAT_STOP} ]; then echo "Stopping tomcat server..." ${TOMCAT_STOP} & else echo "Cannot stop tomcat server" fi } restart() { stop sleep 10 start } status() { echo "No status available for tomcat server" } case "$1" in 'start') start ;; 'stop') stop ;; 'restart') restart ;; 'status') status ;; *) echo "Please supply an argument [start|stop|restart]" esac _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

2 1

Rebuilding Raid 1
by Mace Eliason 03 May '06

03 May '06

Trying a different approch. Senario Raid 1 setup Bootable raid drive failed Mirror has been working for almost a month and then rebooted Now can't boot mirror drive grub not mirrored from other drive. I Fixed bootable drive. Question? Can I hook up both drives and boot fixed drive then rebuilt mirror from nonbootable drive to bootable drive? Does the raid automatically rebuilt when I boot with both drives? Can I run a command to rebuilt from one drive to the other and visa versa I want to try it but I am worried that if I hook them up and it boots that because the bootable drive has older info it might over write the other drive. Thanks Can't seem to figure out how to get the other drive bootable.

5 23

Starting tomcat on bootup
by Todd Reed 03 May '06

03 May '06

I just installed Tomcat and when I run the chkconfig -add tomcat, it tells me that tomcat does not support chkconfig. Suggestions?

4 3

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss