Discuss

discuss@lists.centos.org

2 participants
34758 discussions

RE: [CentOS] Libpcap srpm?
by King, John (Greg) (LMIT-HOU) 01 May '06

01 May '06

Never mind. Found it in the tcpdump srpm. > -----Original Message----- > From: centos-bounces(a)centos.org [mailto:Greg.King@lmit.com] > Sent: Monday, May 01, 2006 2:28 PM > To: centos(a)centos.org > Subject: [CentOS] Libpcap srpm? > > I am looking for this and all I can find (checked some mirrors too) is > the rpm. > > Where is the source rpm so I can rebuild from it? > > Thanks, > > Greg > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos >

1 0

Libpcap srpm?
by King, John (Greg) (LMIT-HOU) 01 May '06

01 May '06

I am looking for this and all I can find (checked some mirrors too) is the rpm. Where is the source rpm so I can rebuild from it? Thanks, Greg

1 0

Raid Questions
by Mace Eliason 01 May '06

01 May '06

Hi, I have a centos 4.2 server setup and running as a zimbra email server. It has 2 18.4Gig SCSI hard drives setup in software raid 1 for mirroring. I had tested the unit before production and found that if I disconnected one of the drives the other wouldn't boot I search and found that I had to modify the boot (I don't remember exactly at the moment) After testing I am sure it worked. On the weekend the power went out and turns out one drive had failed and the server wouldn't boot from the other drive. I am not sure at what point the other drive failed could be days could be weeks ago. What is the proper way to get the system running again? I can fix the failed drive. (damaged pin). When I get it running again will the info on the drive that won't boot be mirror back to the other drive? I am sure the drive that won't boot due to grub and raid is the most current. Thanks for any help Mace

3 3

PHP 5.0.4 and PostgreSQL [solved]
by Dominik Składanowski 01 May '06

01 May '06

You need to change in /var/lib/pgsql/data/pg_hba.conf "ident" to "md5" When you create user password is encrypted, but PostgreSQL server is configured to read password not encrypted. Regards. -- _________________________________________________________________ D o m i n i k S k ł a d a n o w s k i

2 1

PHP 5.0.4 and PostgreSQL
by Dominik Składanowski 01 May '06

01 May '06

Hello list. Does anybody of you use PHP 5.0.4 from "CentOS plus" repo and PostgreSQL 8.1.x from www.postgresql.org (rpms for RHLE 4 AS)? (php-pgsql.rpm I have installed) On my machine PHP don't connect to PostgreSQL. Anybody of you set it up? On the other server I use PHP and PostgreSQL included into CentOS 4.x and it works fine. Regards. -- _________________________________________________________________ D o m i n i k S k ł a d a n o w s k i

3 3

PHP 5.1 rpm
by mbneto 01 May '06

01 May '06

hi, I am looking for a spec (or src.rpm) for PHP 5.1.x and CentOS 4.3. I've noticed that there is a 5.0.4 in the centosplus directory but no 5.1. Any ideas (besides generate my own)?

5 5

firefox-1.5.0.2-3.c4.centos crashing
by Aleksandar Milivojevic 01 May '06

01 May '06

Just wondering, is firefox-1.5.0.2-3.c4.centos from centospolus repo (x86_64 version) crashing for anybody else when opening /usr/share/doc/udev-039/writing_udev_rules/index.html file? It sure makes firefox crash every time for me. -- See Ya' later, alligator! http://www.8-P.ca/

1 0

ip_conntrack_ftp fails to load on CentOS 4.3
by Barry L. Kline 01 May '06

01 May '06

I have a CentOS 4.3 box that is giving me some serious problem. During the "yum update" from 4.2 -> 4.3 I lost my connection (okay, I accidentally closed the window). I logged back on and did another yum update, and it appeared as though things completed properly. Everything is working fine, up until one of my hosting clients noted that he is now unable to use ftp to update his web site. He could when I was running 4.2. Upon further inspection, I noted that the ip_conntrack_ftp module wasn't loaded. When I tried to insert it manually via "modprobe ip_conntrack_ftp" I get what appears to be a hang in the terminal session. Logging on via a separate session I can see that there are tons of "modprobe" processes being spawned. I can use ^C to break out of modprobe and the processes all die. Thinking that I may borked the kernel install, I dropped back to the 2.6.9-22SMP.EL kernel, where I still cannot load the module. I then removed the -34* kernel packages and reinstalled them, then booted into them. No dice. Just for fun, I cleared all iptables entries, and tried again. No dice. Short of a reload (which would be inconvient, given that the box is 100 miles away) I'm at a loss at what to look at next. Everything appears to be fine. The machine is a dual-Athlon box, SCSI, with selinux in permissive mode. Using "strace modprobe ip_conntrack_ftp" I get the results which are at the end of this message. The "unfinished" entry at the end occured when I hit ^C. None of my other boxes (4.2->4.3 upgrades) have this problem. An "rpm -Va" doesn't present any unexpected results (e.g. Those files noted as changed have been, by me.) What have I missed? Any suggestions would be greatly appreciated. Thanks very much. Barry strace modprobe ip_conntrack_ftp results: [SNIP] open("/lib/modules/2.6.9-34.ELsmp/kernel/net/ipv4/netfilter/ip_conntrack.ko", O_RDWR) = 3 fcntl64(3, F_SETLKW, {type=F_WRLCK, whence=SEEK_SET, start=0, len=1}) = 0 open("/proc/modules", O_RDONLY) = 4 fstat64(4, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f36000 read(4, "sunrpc 142757 1 - Live 0xf8c1100"..., 1024) = 923 close(4) = 0 munmap(0xb7f36000, 4096) = 0 close(3) = 0 open("/lib/modules/2.6.9-34.ELsmp/kernel/net/ipv4/netfilter/ip_conntrack_ftp.ko", O_RDWR) = 3 fcntl64(3, F_SETLKW, {type=F_WRLCK, whence=SEEK_SET, start=0, len=1}) = 0 open("/proc/modules", O_RDONLY) = 4 fstat64(4, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f36000 read(4, "sunrpc 142757 1 - Live 0xf8c1100"..., 1024) = 923 read(4, "", 1024) = 0 close(4) = 0 munmap(0xb7f36000, 4096) = 0 close(3) = 0 rt_sigaction(SIGINT, {SIG_IGN}, {SIG_DFL}, 8) = 0 rt_sigaction(SIGQUIT, {SIG_IGN}, {SIG_DFL}, 8) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 clone(child_stack=0, flags=CLONE_PARENT_SETTID|SIGCHLD, parent_tidptr=0xbfec6ed8) = 5403 waitpid(5403, <unfinished ...> [SNIP]

1 0

CentOS 4 for PPC32
by Barry Brimer 01 May '06

01 May '06

Does anyone have any news about the PPC32 release of CentOS 4? Thanks, Barry

1 0

PXE boot, Kickstart NFS install and %include...
by Ron Loftin 01 May '06

01 May '06

Hi Will, I saw your question in the digest version of the list, and thought you might be interested in my solution. I do have it working, and there are a couple of points that I didn't see mentioned in the other parts of this thread, or just were mentioned in passing. The following is a kickstart file for a workstation install on my network. ******************** Begin example ks file *************************** # # Custom partitioning and package selection on mirrored 4.5GB SCSI disks # # nfs --server=server --dir=/export/os-cd/centos/4/os # Use NFS installation media lang en_US.UTF-8 # Language used during installation process langsupport en_US.UTF-8 # Language module(s) to install keyboard us # System keyboard text # Install in text mode %include /mnt/ks/centos/4/ks/general-setup %include /mnt/ks/centos/4/ks/disp/sun-21-inch %include /mnt/ks/centos/4/ks/fw/disabled %include /mnt/ks/centos/4/ks/dsk/4gb-scsi-mirror %include /mnt/ks/centos/4/ks/pkg/ws %include /mnt/ks/centos/4/ks/pkg/cd-burn %pre # # Mount the KickStart tree # mkdir /mnt/ks mount server:/export/install/rhl/kickstart /mnt/ks # # Save DNS config # cp -p /etc/resolv.conf /tmp # %include /mnt/ks/centos/4/ks/post-scripts %include /mnt/ks/centos/4/ks/boot-mirror-scsi ******************** End example ks file ***************************** ******************** Example disk config module ********************** # # Custom partitioning for mirrored 4.5GB SCSI disks # #Clear the Master Boot Record zerombr yes #Clear all partitions from the disk clearpart --initlabel --all part raid.11 --noformat --asprimary --size 2048 --grow --ondisk sda part raid.12 --noformat --asprimary --size 256 --ondisk sda part raid.13 --noformat --asprimary --size 256 --ondisk sda part raid.14 --noformat --asprimary --size 1024 --ondisk sda part raid.21 --noformat --asprimary --size 2048 --grow --ondisk sdb part raid.22 --noformat --asprimary --size 256 --ondisk sdb part raid.23 --noformat --asprimary --size 256 --ondisk sdb part raid.24 --noformat --asprimary --size 1024 --ondisk sdb raid / --fstype ext3 --level 1 --device md0 raid.11 raid.21 raid swap --fstype swap --level 1 --device md1 raid.12 raid.22 raid /var --fstype ext3 --level 1 --device md2 raid.13 raid.23 raid /tmp --fstype ext3 --level 1 --device md3 raid.14 raid.24 ******************** End disk config module ************************** The first 5 lines seem to be required in all kickstart files, or at least I have not been able to do it otherwise. The next lines are modules that describe other KS parameters, display config, firewall config, disk partitions and mirroring, and lists of software groups and/or individual packages to install. One VERY IMPORTANT point to remember is shown in the "%pre" script. This is how to make the modules available to anaconda for processing. Just mount the tree where the modules live somewhere on the target system where you can tell anaconda to go read it. Here, I just create a new directory ( /mnt/ks ) and all %include directives reference that tree. Again, all paths must be specified the way that the CLIENT will evaluate them. After that, it's a snap. You can do almost anything you want as far as including other config files, additional pre/post scripts, whatever. The biggest limit I've found so far is the imagination of the person setting up the process. -- Ron Loftin reloftin(a)twcny.rr.com "God, root, what is difference ?" Piter from UserFriendly

6 8

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss