Discuss

discuss@lists.centos.org

2 participants
34758 discussions

Start a nNew thread

Re: Re: Re: Re: Re: Re: Re: Re: RE: [CentOS] Moving files to new server
by nayeem＠gulfnetksa.com 13 Mar '06

13 Mar '06

Please send email at nayeem(a)ksa.zajil.com

7 8

OT: routing between eth0 and ppp0 WITHOUT NAT
by James Pifer 13 Mar '06

13 Mar '06

Sorry to post this here, but since last week I've posted to Fedora's mailing list, pptp-devel's list, and linuxgeneral forum. No one has given much for answers, or the people that have replied have not understood what I'm looking for. Hoping someone here can. For the record, I'm doing this on FC3 not CentOS. Anyway, if anyone can provide assistance I would be very appreciative. I'm trying to setup linux as a router instead of a MASQ/NAT over a VPN. So I'm trying to "connect" to private networks using the VPN as the conduit. Here are the details: On a Fedora Core 3 machine 1) running pptpclient 2) pptpclient is configured to do "LAN to LAN" 3) machine set to act as a router: /proc/sys/net/ipv4/ip_forward is set to 1 After I make the pptp connection I do: iptables -F When I try to use the connection the machine is still doing NAT. So next I also do: iptables -t nat -F Now, that breaks it so other machines cannot access the remote network at all, even though the static routes are still in place. For example, I have a windows machine that can access the remote network before blowing the nat table away. After blowing the nat table away, if I do a tracert on the windows machine, the tracert stops at the internal nic (eth0) of the FC3 pc with the vpn connection. It is also setup as a router. So it never does an routing. I've also played with lots of different rules found on the net for dealing with H323 over iptables and have had no success. I've also loaded ip_conntrack and that did not make a difference. So the FC3 machine, with a connection to eth0 and ppp0, plus set to act as a router, does not appear to act as a router between eth0 and ppp0. Is it possible to make it be a router between eth0 and ppp0 WITHOUT masquerade? Just be a router.... We have routes on the other side telling the routers how to reach my internal network. To ask the question why? I have an IPPhone that does not work through iptables. In the past I used IPCop as my firewall and connect to my company with branch office VPN. The VPN was great and super stable, but the IPPhone would connect once in a while at best. Research showed the problem was iptables. I now have a hardware router that does branch office and the phone works pretty well. I want to try and get it to work with the above scenrio so I can take the phone with me on the road. I would like to pptp vpn using laptop's wireless NIC. Then have the phone directly connected to the 10/100 NIC with a crossover cable. Maybe I'm in a dreamland and this is not possible, I don't know. Any assistance is appreciated. James

3 6

RE: [CentOS] server vendor
by Bowie Bailey 13 Mar '06

13 Mar '06

William Warren wrote: > I need a good server vendor(not dell) that i can get a server from > that is 1u rack mountable(2u max) with a decent turnaround(i am > hoping if i order tomorrow i can get it within two weeks. who would > you recommend? I have had good luck with www.asaservers.com. They will even pre-install CentOS for you. -- Bowie

1 0

Re: [CentOS] YUM update from RHEL3 to CentOS3 stalls
by iank＠mac.com 13 Mar '06

13 Mar '06

Thanks Johnny. Well, here is some good news (I hope). I was able to scroll back on the console, and it looks like all of the RPMs were installed, but it is the actual post-install scripts that were interrupted. I checked the list of what was installed vs. the list of what was dowloaded/needed, and they match. So, any ideas on how to complete the post-install process? Ian

1 0

Re: [CentOS] YUM update from RHEL3 to CentOS3 stalls
by iank＠mac.com 13 Mar '06

13 Mar '06

Johnny Hughes wrote: > > try: > yum clean > > and then > > yum upgrade Thanks Johnny. I forgot to mention that I have already tried: yum clean yum clean all rebuilding the RPM database clearing out all of the headers/header.info under /var/cache/yum It still claims nothing needs to be done. BTW, sorry if this reply hoses threading. I'm in an in-between state right now, in the midst of switching jobs. So, my mail list memberships are being received in one place, but sent from another. Thanks again, Ian

2 1

YUM update from RHEL3 to CentOS3 stalls
by iank＠mac.com 13 Mar '06

13 Mar '06

Hi all, I just ran into a problem. I was following the nifty procedure to upgrade a WhiteHat/RHEL3.x box to CentOS 3.6 and the update hung. It was in the process of updating MySQL server, and a post install scriptlet apparently failed. So I killed the process with a CTRL-C. However, upon trying to restart YUM, it says there is nothing left to, saying: Gathering header information file(s) from server(s) Server: CentOS-3 - Addons Server: CentOS-3 - Base Server: CentOS-3 - Extras Server: CentOS-3 - Updates Finding updated packages Downloading needed headers No Packages Available for Update No actions to take However, the MySQL server package was 121/172, so there should be 51 packages left. Unless the output to the screen was killed off, but the process continued? I have yet to reboot for fear something is in a very unstable state. Any ideas? Thanks, Ian

2 1

Drac 4 and CentOS 4
by William Warren 13 Mar '06

13 Mar '06

I am curious if the java requirements for the Drac4 have been updated? From what i have found in the archives the Drac 4 still requires an old java version? Could someone let me know if I am incorrect? -- My "Foundation" verse: Isa 54:17 No weapon that is formed against thee shall prosper; and every tongue that shall rise against thee in judgment thou shalt condemn. This is the heritage of the servants of the LORD, and their righteousness is of me, saith the LORD. -- carpe ductum -- "Grab the tape" CDTT (Certified Duct Tape Technician) Linux user #322099 Machines: 206822 256638 276825 http://counter.li.org/

1 1

alsa 1.0.11rc3 on AMD 64
by Jerry Geis 13 Mar '06

13 Mar '06

Any one try alsa 1.0.11rc3 on AMD 64? I download drivers, library and utils. I did ./configure; make; make install for drivers. worked fine. I did ./configure; make; make install for libs. worked fine. I did ./configure on utils worked fine. on doing a make I get the following errors below. I did try the alsa mailing list first... All I got there was it worked on their linux system. Any ideas on why the utils compile is failing. drivers and libs worked fine. THanks, Jerry ------------------ Making all in alsactl make[1]: Entering directory `/usr/src/alsa-utils-1.0.11rc2/alsactl' gcc -g -O2 -o alsactl alsactl.o state.o power.o names.o -lasound -lm -ldl -lpthread state.o(.text+0x53b): In function `get_control': /usr/src/alsa-utils-1.0.11rc2/alsactl/state.c:185: undefined reference to `snd_ctl_elem_info_is_user' state.o(.text+0x1b3c): In function `add_user_control': /usr/src/alsa-utils-1.0.11rc2/alsactl/state.c:724: undefined reference to `snd_ctl_elem_add_boolean' state.o(.text+0x1b54):/usr/src/alsa-utils-1.0.11rc2/alsactl/state.c:727: undefined reference to `snd_ctl_elem_add_iec958' state.o(.text+0x1b8c):/usr/src/alsa-utils-1.0.11rc2/alsactl/state.c:721: undefined reference to `snd_ctl_elem_add_integer' names.o(.text+0xe1b): In function `probe_timers': /usr/src/alsa-utils-1.0.11rc2/alsactl/names.c:428: undefined reference to `snd_timer_ginfo_sizeof' names.o(.text+0xe3b):/usr/src/alsa-utils-1.0.11rc2/alsactl/names.c:428: undefined reference to `snd_timer_ginfo_sizeof' names.o(.text+0xe9e):/usr/src/alsa-utils-1.0.11rc2/alsactl/names.c:438: undefined reference to `snd_timer_ginfo_set_tid' names.o(.text+0xf0f):/usr/src/alsa-utils-1.0.11rc2/alsactl/names.c:448: undefined reference to `snd_timer_ginfo_get_name' collect2: ld returned 1 exit status make[1]: *** [alsactl] Error 1 make[1]: Leaving directory `/usr/src/alsa-utils-1.0.11rc2/alsactl' make: *** [all-recursive] Error 1

1 0

Shocking news: Yum update repo server runs on Mirosoft IIS?
by Yanik Doucet 13 Mar '06

13 Mar '06

2 1

Strange SSH login try.
by Dominik Składanowski 13 Mar '06

13 Mar '06

Hello list. Today I saw something strange in logs one of my servers. Part of the /var/log/security: Mar 12 15:01:03 server sshd[28505]: Invalid user abc from ::ffff:x.x.x.x Mar 12 15:01:03 server sshd[28503]: Invalid user ab from ::ffff:x.x.x.x Mar 12 15:01:03 server sshd[28507]: Invalid user abcd from ::ffff:x.x.x.x Mar 12 15:01:03 server sshd[28509]: Invalid user abcde from ::ffff:x.x.x.x Mar 12 15:01:03 server sshd[28511]: Invalid user abcdef from ::ffff:x.x.x.x Mar 12 15:01:04 server sshd[28515]: Invalid user abcdefgh from ::ffff:x.x.x.x Mar 12 15:01:04 server sshd[28513]: Invalid user abcdefg from ::ffff:x.x.x.x "abcdefgh" is my username to the different machine in the other domain, x.x.x.x it's my workstation. Yesterday, I loged into machine where my login is "abcdefgh" from x.x.x.x. But not to the "server". Anybody has an idea? Regards -- _________________________________________________________________ D o m i n i k S k ł a d a n o w s k i

4 6

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss