Discuss

discuss@lists.centos.org

2 participants
34758 discussions

"nv" driver lock up where new version
by Jerry Geis 14 Jan '06

14 Jan '06

Jim, I have posted my xorg.conf file as you can see I have the 1920x1080 information. I post the log file saying nvidia is not accepting the line. The nv driver works at the 1920x1080 information it just doesnt seem stable. jerry ----------------- Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "LCD Panel 1920x1200" HorizSync 31.5 - 90.0 VertRefresh 60.0 - 60.0 ModeLine "1920x1080" 138.5 1920 1968 2000 2080 1080 1082 1087 1111 -hsync +vsync Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "nvidia" VendorName "Videocard vendor" BoardName "NVIDIA GeForce FX (generic)" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 16 Modes "800x600" "640x480" EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1920x1080" "1600x1200" "1400x1050" "1280x1024" "1280x960" "1024x768" "800x600" "640x480" EndSubSection EndSection --------------------------- (II) NVIDIA(0): Frequency information for DFP-0: (II) NVIDIA(0): HorizSync : 30.000-80.000 kHz (II) NVIDIA(0): VertRefresh : 50.000-75.000 Hz (II) NVIDIA(0): (HorizSync from EDID) (II) NVIDIA(0): (VertRefresh from EDID) (II) NVIDIA(0): Adding EDID-provided mode "1920x1080" for DFP-0. (II) NVIDIA(0): Monitor0: Using hsync range of 30.00-80.00 kHz (II) NVIDIA(0): Monitor0: Using vrefresh range of 50.00-75.00 Hz (II) NVIDIA(0): Clock range: 12.00 to 135.00 MHz (II) NVIDIA(0): Not using mode "1920x1080" (bad mode clock/interlace/doublescan)

2 1

"nv" driver lock up where new version
by Jerry Geis 14 Jan '06

14 Jan '06

I have had my "nv" driver lock up a number of times. I downloaded the "nvidia" drivers and they did not work at 1920x1080 resolution. I am looking for an updated driver for just "nv". I found some once for a different driver that you just update commonXXX and yourdriverXXX not the whole X recompile. Where can I find those drivers? THanks, Jerry

2 1

snmp monitoring application
by Aniseko Ioane 14 Jan '06

14 Jan '06

what a better snmp app for centos?

3 3

Re: [CentOS] Printing Postscript - Very Weird Problem.
by C.M. Connelly 13 Jan '06

13 Jan '06

"MZ" == Maciej Żenczykowski <maze(a)cela.pl> MZ> Hey folks, okay, here's the situation - I have a Centos MZ> 4.2 system with cups printing installed printing via MZ> postcript (with appropriate PPD file) to a HP LaserJet MZ> 1320N printer (via jetdirect socket 9100). I have the same setup.... MZ> Everything seems to work right - except for an unusual MZ> 'font'??? problem. Many letters seem to be just slightly MZ> garbled. I have also seen this problem, generally when printing a PDF file (generated with TeX) from gv. If I open the file in Acrobat, it prints fine. I just tried generating some PostScript by piping the output of a command that produces ASCII through ``a2ps -1'', and I see no issues with the printout. If I take a simple LaTeX document and TeX it, producing a DVI file; then run dvips to produce a PostScript file and print that file From gv, I see no issues. On the other hand, if I run that same PostScript file through ps2pdf, then open the PDF file in gv and print it, I see the broken/malformed character issue. Running pdflatex on the source file to get a PDF file gives the same results: looks fine on screen, prints with broken/malformed characters from gv; prints fine from Acrobat. I had the very same problem with a LaserJet 1200 connected via a parallel cable under CentOS 3 a while back, and never really figured out what the deal was beyond this point. The obvious candidate is GhostScript, or gv's use of GhostScript to generate PostScript from the PDF file. Sorry I can't be more specific about what the cause is or a better solution, but at least you know you're not alone in having the problem! Claire P.S. On Will's question -- self tests work fine. It's definitely not the printer, unless it's some weird interaction between its emulated-PostScript interpreter and GhostScript. *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-* Claire Connelly cmc(a)math.hmc.edu Systems Administrator (909) 621-8754 Department of Mathematics Harvey Mudd College *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

1 0

RE: [CentOS] "find" statement: 64bit related??
by Bowie Bailey 13 Jan '06

13 Jan '06

rado wrote: > hi! > 3 machines all run this same test script. 2 -i386, 1 x-64bit machine. > > this line: > > if find / -mount -type f -mtime -1 -print0 | xargs -0 clamscan -l \ > $CLAMDAILY $CLAMEXCLUDES -r --no-summary | cut -d: -f1 > $CHANGEDLOG; > \ then > > the $CHANGEDLOG file... on the 32 bit boxes...oh, probably 220 files. > On the 64bit box 177,999 files lol (Centos 64bit w/everything > installed)! > > it seems to me that the system is disregarding "-mtime -1" > > sure has me puzzled! I have rechecked all of my assigned variables > over and over in the cfg file and the syntax of the functions in the > functions file that make up the whole "team". I can find nothing > remarkable relating to the 64 box's cfg. > > any suggestions? It seems to work fine on my 64-bit machines. Try running this to see what is being selected: find / -mount -type f -mtime -1 -print0 | xargs -0 ls -ld > new_files.txt With the 'ls -ld', you will see the modification times as well, so you can tell if it is really selecting the wrong files. -- Bowie

2 1

system-config-users error
by Jeff Montagna 13 Jan '06

13 Jan '06

Has anyone seen this error before in CentOS 4.2? I've been setting up two identical systems, one has this error and the other doesn't. Short of removing and re-installing all the packages related to gtk is there an easier solution? I have removed and re-installed all the system-config tools, but the error didn't change. sudo system-config-users ** (system-config-users.py:27349): WARNING **: entry is incorrectly formatted (system-config-users.py:27349): GLib-GObject-CRITICAL **: file gvaluearray.c: line 42 (g_value_array_get_nth): assertion `value_array != NULL' failed ** ERROR **: file lib/user.c: line 662 (merge_ent_array_duplicates): should not be reached aborting... /usr/share/system-config-users/system-config-users: line 4: 27349 Aborted /usr/bin/python2 /usr/share/system-config-users/system-config-users.py Jeff Montagna

2 2

RE: [CentOS] RE: Broadcom NIC Binding under Centos 4.2
by ABOKHALAF, Nassri Abdellatif 13 Jan '06

13 Jan '06

Robin, > I have not had time to test this, but the documentation > states that it can be done with some of the other mode=x > numbers, where the mode number represents different types of > bonding ie. round robin, active/standby, etc.. > > Let us know which mode you go with. I'm reading the bonding doc, i'll give a try to the active/active mode, just nedd to make shore that bonding emultates only one MAC addr. Need also to understand if the switch needs to deliver a trunk or just a usual port to my box. I'll come back later with me config. Thanks, Nassri

2 1

"find" statement: 64bit related??
by rado 13 Jan '06

13 Jan '06

hi! 3 machines all run this same test script. 2 -i386, 1 x-64bit machine. this line: if find / -mount -type f -mtime -1 -print0 | xargs -0 clamscan -l \ $CLAMDAILY $CLAMEXCLUDES -r --no-summary | cut -d: -f1 > $CHANGEDLOG; \ then the $CHANGEDLOG file... on the 32 bit boxes...oh, probably 220 files. On the 64bit box 177,999 files lol (Centos 64bit w/everything installed)! it seems to me that the system is disregarding "-mtime -1" sure has me puzzled! I have rechecked all of my assigned variables over and over in the cfg file and the syntax of the functions in the functions file that make up the whole "team". I can find nothing remarkable relating to the 64 box's cfg. any suggestions? thx John Rose -- When a man's around a woman wearing leather clothing, His heart starts beating faster...get's weak knees...throat gets dry...thinks irrationally because she smells like a new truck!

1 0

Yum out of sync?
by Jeff Lasman 13 Jan '06

13 Jan '06

I'm trying to run "yum update" on "CentOS release 3.4 (final)": But I'm getting an error: <snip> Package mod_ssl needs httpd = 2.0.46-44.ent.centos.2, this is not available. </snip> However: </snip> [root@dev1 root]# rpm -qa | grep httpd httpd-devel-2.0.46-44.ent.centos.2 httpd-2.0.46-44.ent.centos.2 </snip> It's installed. So I try yum update httpd and get the same error message. Any ideas? Thanks. Jeff -- Jeff Lasman, Nobaloney Internet Services 1254 So Waterman Ave., Suite 50, San Bernardino, CA 92408 Our blists address used on lists is for list email only Phone +1 909 266-9209, or see: "http://www.nobaloney.net/contactus.html"

5 12

RE: Broadcom NIC Binding under Centos 4.2
by ABOKHALAF, Nassri Abdellatif 13 Jan '06

13 Jan '06

Thanks Robin, > here is a sample. If you want to use tagged vlans it will be > slightly different. Let me know if you want a tagged vlan sample. Followed you samples and team is working just fine now. Tested both nics for failover and never lost a ping. One question : Could you configure both interfaces so you could bind bandwith of both interfaces and still have failover? Nassri

3 3

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss