Discuss

discuss@lists.centos.org

2 participants
34758 discussions

php + sybase 12.5 shared module
by Bassett, Mark 12 Jan '06

12 Jan '06

PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/sybase.so' - /usr/lib/php/modules/sybase.so: undefined symbol: dbversion in Unknown on line 0 After doing a rpmbuild -bb on the php 5.0.4 source rpm from centosplus. The packages all build, but I cannot seem to get sybase to compile as a shared module. If I make it a static module it compiles fine. Anyone have any ideas what this error is about?

1 0

compiling and getting an error
by Jerry Geis 12 Jan '06

12 Jan '06

I downloaded a bluetooth module today (btsco.41.tgz) I am getting an error on line 88 when compiling and trying to figure out why??? I have compared it to alsa-driver code and it looks good to me. here is the source snippit: ----------------- the following line is line 86 --------------- static int index[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = -2}; module_param_array(index, int, NULL, 0444); MODULE_PARM_DESC(index, "Index value for Bluetooth SCO Headset Soundcard."); ------------------------------------------------------------------- below is the compile output. [root@geisjdell kernel]# [root@geisjdell kernel]# make make[1]: Entering directory `/usr/src/kernels/2.6.9-22.0.1.EL-i686' CC [M] /usr/src/btsco-0.41/kernel/btsco.o /usr/src/btsco-0.41/kernel/btsco.c:88: error: invalid lvalue in unary `&' /usr/src/btsco-0.41/kernel/btsco.c:88: error: initializer element is not constant /usr/src/btsco-0.41/kernel/btsco.c:88: error: (near initialization for `__param_arr_index.num') make[2]: *** [/usr/src/btsco-0.41/kernel/btsco.o] Error 1 make[1]: *** [_module_/usr/src/btsco-0.41/kernel] Error 2 make[1]: Leaving directory `/usr/src/kernels/2.6.9-22.0.1.EL-i686' make: *** [default] Error 2 [root@geisjdell kernel]# Any idea on what to do with this? Most everything else I download compiles. I am using a fully up2date centos 4.2 system. Thanks for any suggestions... Jerry

1 0

I have installed CentOS 4.2 on an AMD based machine using the ATI chipset (xpress 200) and I am hav
by Chris Hammond 12 Jan '06

12 Jan '06

I have installed CentOS 4.2 on an AMD based machine using the ATI chipset (xpress 200) and I am having issues with it. It seems to be a very Linux unfriendly chipset. I have looked at the ATI proprietary drivers but they seem to be for video. My problem is the IDE channel on which you cannot enable DMA. There is serious clock slew also as well as nic issues. There is supposed to be an ATI driver in the kernel that works properly with the IDE controller. Has anyone here had to deal with this chipset (SB400) and been able to compile kernel modules or the such to work around the issues? Thanks Chris

1 0

server without gcc?
by Robert Hanson 12 Jan '06

12 Jan '06

i cant believe i have a production box online without gcc installed using a new CentOS 4 server CD??? confused to say the least as i always install all the compiler and etc components... will the command yum install gcc get me everything i need or should i specify something else to get everything in one swoop that i might ever need thanks - rh -- Robert Hanson - Abba Communications Computer & Internet Services (509) 624-7159 - www.abbacomm.net

6 8

RE: [CentOS] Broadcom NIC Binding under Centos 4.2
by ABOKHALAF, Nassri Abdellatif 12 Jan '06

12 Jan '06

Thanks Robin, > > here is a sample. If you want to use tagged vlans it will be > slightly different. Let me know if you want a tagged vlan sample. Looks good ! I will try it right now ! Nassri

1 0

Broadcom NIC Binding under Centos 4.2
by ABOKHALAF, Nassri Abdellatif 12 Jan '06

12 Jan '06

Hello all, I'm having unusual difficulty configuring teaming with Centos 4.2. The 2 NIC's are Broadcom. The HW is HP DL360 and there is no teaming driver for RHEL4 since it comes with package (says HP). Since there is no teaming driver from centos (as far as I know), I tried the Broadcom Driver, configured the team file, but the team just wont come up. A Virtual Interface should be up but only eth0 & eth1 appear. I fell really stupid because with Intel this is pretty straightforward. Any clues, any suggestions, Nassri

2 1

ac_nonexistent
by Jerry Geis 12 Jan '06

12 Jan '06

I am trying to compile btsco.41 and it is looking for ac_nonexistent.h "yum provides ac_nonexistent.h" does not tell me anything. Where might I find this file??? Thanks jerry

2 1

Backup strategy using 2 HDD + 2 drawers
by Ugo Bellavance 12 Jan '06

12 Jan '06

Hi, One of my CentOS 4 server is a repository for backups for other machines. In this server, there is a 3ware RAID card and 2 HDD for the OS + data of this server. I also have 2 drawers (each containing one 200GB hdd), connected to a promise TX2000 card. One disk will remain in the server and one will be taken outside. What would be the best strategy for syncing the hdd when I swap them? Note: I don't want to do hot swap. No problem putting this server down once a week. It is a development server. Regards, -- Ugo -> Please don't send a copy of your reply by e-mail. I read the list. -> Please avoid top-posting, long signatures and HTML, and cut the irrelevant parts in your replies.

5 8

CentOS-announce Digest, Vol 11, Issue 3
by centos-announce-request＠centos.org 12 Jan '06

12 Jan '06

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2006:0156 Moderate CentOS 3 i386 ethereal - security update (Tru Huynh) 2. CESA-2006:0156 Moderate CentOS 3 x86_64 ethereal - security update (Tru Huynh) 3. CESA-2006:0163 Important CentOS 3 i386 cups - security update (Tru Huynh) 4. CESA-2006:0163 Important CentOS 3 x86_64 cups - security update (Tru Huynh) 5. CESA-2006:0163 Important CentOS 3 ia64 cups - security update (Pasi Pirhonen) 6. CESA-2006:0156 Moderate CentOS 3 ia64 ethereal - security update (Pasi Pirhonen) 7. CESA-2006:0163 Important CentOS 3 s390(x) cups - security update (Pasi Pirhonen) 8. CESA-2006:0163 Important CentOS 4 ia64 cups - security update (Pasi Pirhonen) 9. CESA-2006:0163 Important CentOS 4 axp cups - security update (Pasi Pirhonen) 10. CESA-2006:0163 Important CentOS 4 s390(x) cups - security update (Pasi Pirhonen) 11. CESA-2006:0177 Important CentOS 4 ia64 gpdf - security update (Pasi Pirhonen) 12. CESA-2006:0177 Important CentOS 4 axp gpdf - security update (Pasi Pirhonen) 13. CESA-2006:0177 Important CentOS 4 s390(x) gpdf - security update (Pasi Pirhonen) 14. CESA-2006:0156 Moderate CentOS 4 ia64 ethereal - security update (Pasi Pirhonen) 15. CESA-2006:0156 Moderate CentOS 4 axp ethereal - security update (Pasi Pirhonen) 16. CESA-2006:0156 Moderate CentOS 4 s390(x) ethereal - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Wed, 11 Jan 2006 23:25:50 +0100 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2006:0156 Moderate CentOS 3 i386 ethereal - security update To: centos-announce(a)centos.org Message-ID: <20060111222550.GA13966(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2006:0156 ethereal security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2006-0156.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/ethereal-0.10.14-1.EL3.1.i386.rpm updates/i386/RPMS/ethereal-gnome-0.10.14-1.EL3.1.i386.rpm source: updates/SRPMS/ethereal-0.10.14-1.EL3.1.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update ethereal\* Tru -- Tru Huynh (CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

help with Xlib
by Craig White 12 Jan '06

12 Jan '06

I have a remote session via ssh/vncviewer and I'm logged in and working. I have opened a terminal and am trying to start the Fedora Directory Server console (not that this should matter)... and thus I am typing (as root)... ./startconsole -x nologo -u admin -a MYHOSTNAME:PORT# & and it fails to launch and returns the following error... Xlib: connection to "MYHOSTNAME:1.0" refused by server Xlib: no protocol specified Console: can't connect to X11 window server using 'MYHOSTNAME:1.0' as the value of the DISPLAY variable and of course it then exits I have done this elsewhere - the difference I think is that I originally installed this system without any X stuff but have since added it and am launching this from a GNOME session (so I know X is working). Clues? Craig

4 9

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss