Discuss

discuss@lists.centos.org

2 participants
34758 discussions

RE: [CentOS] centos 4.2 update - help!
by Terry Tai 03 Jan '06

03 Jan '06

Thanks for all kind comment, After choosing one nearest mirror site, the update problem was fixed. Regards Terry -----Original Message----- From: Igor Kresnik [mailto:kresnik.igor@gmail.com] Sent: 星期一, 2 一月, 2006 18:14 To: CentOS mailing list Subject: Re: [CentOS] centos 4.2 update - help! try use command yum regards Igor Terry Tai pravi: > > Hello > I have installed centos 4.2 in dell poweredge 850. but I found that > when I launch up2date to do a update action, it always get time out > problem. just like > > error while retrieving package gtk 2-2.14.13-18 > the message is time out > > any one can give some help > > Thanks and Regards > Terry > > ************************************ E-mail Disclaimer > ************************************ > > This e-mail message (together with any attachments) is confidential to > the addressee > > and may also be privileged. If you are not the intended recipient, you > are hereby notified > > that any dissemination, distribution or copying of this message is > strictly prohibited. > > Please also notify the sender immediately by return e-mail and delete > it from your system. > > Internet communications cannot be guaranteed to be secure or error-free. > > The sender and the entity through which this message is sent therefore > do not accept > > liability for errors or omissions as contained in the message and any > spreading of viruses > > as a result of Internet transmission. > > Any opinions contained in this message are those of the sender > personally and would > > not bind any entity unless otherwise clearly stated and with the > authority of the sender > > duly verified. > > **************************************************************************** *************** > > > ------------------------------------------------------------------------ > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos > _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

Reading the Output of DF
by Todd Cary 02 Jan '06

02 Jan '06

I am not sure how to interpret the output of the DF -h command. Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 112G 12G 95G 11% / /dev/hda1 99M 12M 82M 13% /boot none 125M 0 125M 0% /dev/shm The filesystem Centos is using is new to me since I have RH 9 on my other server. I assume the FS combines my two drives into the virtual drive. What I do not understand is the "none" filesystem and how that relates to the "VolGroup00-LogVol00", if at all. Todd -- Ariste Software 2200 D Street Ext Petaluma, CA 94952 (707) 773-4523

3 2

Bash 2 on Centos 4.2
by Adriano Frare 02 Jan '06

02 Jan '06

Dear Friends, I need package bash2, but I didn't find it. Thanks Adriano

2 2

PHP not working with Mysql?
by fred.dehmel＠chefmail.de 02 Jan '06

02 Jan '06

Hi, I installed MySQL via YUM on an actual CentOS coming with this great bluequartz and it seems they won´t to play with each other. MySQL is working, phpinfo shows me. that it is there. Now i transfered some of my stuff and nothing works: phpmyadmin (with correct inc.php) tells me, that my php-Installation isn´t correct, a little cms (Contenido) shows white pages. Mysqld.log tells me, that all is ok, phpinfo the same. Any idea, what my mistake is? Thanks! Fred 1 Million Singles in Ihrer Nahe. Finden Sie Ihren Traumpartner bei Deutschlands beliebtester Partnerboerse: http://singles.freenet.de/index.html?pid=11512

2 1

Kernel
by Admin 02 Jan '06

02 Jan '06

Hi list anyone know what kernel latest CentOS uses? Thanks in advance Regards Jan Erik

2 1

RE: [CentOS] centos 4.2 update - help!
by Terry Tai 02 Jan '06

02 Jan '06

Hello I have installed centos 4.2 in dell poweredge 850. but I found that when I launch up2date to do a update action, it always get time out problem. just like error while retrieving package gtk 2-2.14.13-18 the message is time out any one can give some help Thanks and Regards Terry ************************************ E-mail Disclaimer ************************************ This e-mail message (together with any attachments) is confidential to the addressee and may also be privileged. If you are not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this message is strictly prohibited. Please also notify the sender immediately by return e-mail and delete it from your system. Internet communications cannot be guaranteed to be secure or error-free. The sender and the entity through which this message is sent therefore do not accept liability for errors or omissions as contained in the message and any spreading of viruses as a result of Internet transmission. Any opinions contained in this message are those of the sender personally and would not bind any entity unless otherwise clearly stated and with the authority of the sender duly verified. *******************************************************************************************

3 2

Yumex
by Paul Vandenberg 01 Jan '06

01 Jan '06

In case anybody is interested, I found a version of Yumex that will work with CentOS 4.2. It is from another RHEL clone, Scientific Linux. This is the URL. ftp://ftp.scientificlinux.org/linux/scientific/42/i386/SL/RPMS/yumex-0.42-9… Cheers....Paul

1 0

noprobe boot option with askmethod and NFS install
by Jerry Geis 31 Dec '05

31 Dec '05

>insmod <module> should do it On 31/12/05, Jerry Geis <geisj at pagestation.com <http://lists.centos.org/mailman/listinfo/centos>> wrote: >/ />/ If you specify noprobe at boot can you then manually />/ specify to load the 8139too network module? If so how? />/ />/ Thanks, />/ />/ jerry I am trying to to boot with askmethod to do an nfs install I did the noprobe insmod 8139too and it did not load the network driver. Did I miss something? my command is "linux askmethod noprobe insmod 8139too" Thanks, Jerry /

1 0

noprobe boot option
by Jerry Geis 31 Dec '05

31 Dec '05

If you specify noprobe at boot can you then manually specify to load the 8139too network module? If so how? Thanks, jerry

2 1

RE: Intel Corporation 82573V Gigabit Ethernet Controller
by Gerald Waugh 31 Dec '05

31 Dec '05

> > Attempting to install CentOS on a new MSI MB (MS 9618), which > uses the subject controllers. > There are two controllers on the board, seems as though only > one can be used. > I have to manually init, using ifconfig eth0, to use it. > > I understand that the Ethernet controller drivers are not available. > Is there any news on this or a possible date when drivers > will be incorporated into the install. > > lspci reads; > 03:00.0 Ethernet controller: Intel Corporation 82573V Gigabit > Ethernet Controller (Copper) (rev 03) > 04:00.0 Ethernet controller: Intel Corporation 82573V Gigabit > Ethernet Controller (Copper) > > I find that on bootup the Intel boot loader indicates that > The Ethernet port is corrupted or not initalized, now I assume that > the boot loader is in the ROM, as it comes up early in the > boot process. > > Dmesg says; > ======================================================= > Intel(R) PRO/1000 Network Driver - version 6.0.54-k2-NAPI > Copyright (c) 1999-2004 Intel Corporation. > ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 10 (level, low) -> IRQ 10 > PCI: Setting latency timer of device 0000:03:00.0 to 64 > divert: allocating divert_blk for eth0 > e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection > ACPI: PCI interrupt 0000:04:00.0[A] -> GSI 11 (level, low) -> IRQ 11 > PCI: Setting latency timer of device 0000:04:00.0 to 64 > e1000: 0000:04:00.0: e1000_probe: The EEPROM Checksum Is Not Valid > e1000: probe of 0000:04:00.0 failed with error -5

4 4

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss