Discuss

discuss@lists.centos.org

2 participants
34758 discussions

32 bits software on 64 bits CentOS core
by Alex Yuner 22 Nov '05

22 Nov '05

Hello to everybody, it´s possible run 32 bits program on a 64 bits CentOS core?? --------------------------------- Correo Yahoo! Comprueba qué es nuevo, aquí http://correo.yahoo.es

4 3

x windows dell inspiron 1200 setting for 1366x768
by Jerry Geis 22 Nov '05

22 Nov '05

I am attempting to setup a dell inspirons 1200 laptop media accelerator 900 from intel is the chipset so I am using the i810 driver. In the default 1024x768 everything is fine. I am trying to setup the external port not the LCD to be 1366x768. I added a modeline to xorg.conf of: Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "LCD Panel 1600x1200" HorizSync 31.5 - 90.0 VertRefresh 60.0 - 60.0 ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync ModeLine "1024x768" 54.2 1024 1048 1184 1344 768 771 777 806 -hsync -vsync ModeLine "1366x768" 85.5 1366 1494 1624 1798 768 770 776 795 -hsync +vsync Option "dpms" EndSection There is a line in the log file of: (II) I810(0): Monitor0: Using hsync range of 31.00-70.00 kHz (II) I810(0): Monitor0: Using vrefresh range of 50.00-85.00 Hz (II) I810(0): Not using mode "1366x768" (no mode of this name) (II) I810(0): Not using built-in mode "1600x1200" (width too large for virtual size) (II) I810(0): Not using built-in mode "1280x1024" (width too large for virtual size) (1366x768,Monitor0) mode clock 100000MHz exceeds DDC maximum 110MHz (1600x1200,Monitor0) mode clock 162MHz exceeds DDC maximum 110MHz (II) I810(0): 6632 kBytes additional video memory is required to I looked at the specs of the media 900 and it does something like 25XXx10XX What am I not setting up correctly to see the 1366x768? THanks so much, Jerry

1 0

using xfce
by Roger D Vargas 22 Nov '05

22 Nov '05

I had to make a minimal install and now Im installing some packages I need. I decided to use xfce as desktop, but after install, I cant find a way to set is as preferred desktop environment. I try switchdesk xfce, but it says xfce is not installed. How can I set it? -- Roger D. Vargas http://dsgp.blogspot.com | Linux, programación, juegos ______________________________________________ Renovamos el Correo Yahoo! Nuevos servicios, más seguridad http://correo.yahoo.es

4 5

Bad disk?
by Morten 22 Nov '05

22 Nov '05

Hi, I get the below from dmesg. The server seems to run fine, but it does worry me. What should I do? Other than take a backup.. :-) hda: dma_timer_expiry: dma status == 0x21 hda: DMA timeout error hda: dma timeout error: status=0xd0 { Busy } ide: failed opcode was: unknown hda: DMA disabled ide0: reset: success hda: dma_timer_expiry: dma status == 0x21 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=11242764, high=0, low=11242764, sector=11242760 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 11242760 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=11435969, high=0, low=11435969, sector=11435968 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 11435968 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=11277069, high=0, low=11277069, sector=11277064 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 11277064 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=11277069, high=0, low=11277069, sector=11277064 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 11277064 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=11277069, high=0, low=11277069, sector=11277064 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 11277064 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=11277069, high=0, low=11277069, sector=11277064 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 11277064 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=11277069, high=0, low=11277069, sector=11277064 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 11277064 hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=11435269, high=0, low=11435269, sector=11435264 ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 11435264 hda: dma_timer_expiry: dma status == 0x21 hda: DMA timeout error hda: dma timeout error: status=0xd0 { Busy } ide: failed opcode was: unknown hda: DMA disabled ide0: reset: success hda: irq timeout: status=0xd0 { Busy } ide: failed opcode was: unknown ide0: reset: success hda: irq timeout: status=0xd0 { Busy } ide: failed opcode was: unknown ide0: reset: success hda: irq timeout: status=0xd0 { Busy } ide: failed opcode was: unknown end_request: I/O error, dev hda, sector 31873944 hda: status timeout: status=0xd0 { Busy } ide: failed opcode was: unknown hda: DMA disabled hda: drive not ready for command ide0: reset: success

7 12

Vsftpd + ssl
by Thomas E Dukes 22 Nov '05

22 Nov '05

Hello, Does anyone have this working? I have been looking for a couple of hours trying to find docs on how to set this up and so far the only thing I have found is how to enable ssl in vsftpd.conf. TIA

2 3

x windows setting up laptop external monitor atdifferent resolution than LCD
by Jerry Geis 22 Nov '05

22 Nov '05

On 11/22/05, Jerry Geis <geisj at pagestation.com <http://lists.centos.org/mailman/listinfo/centos>> wrote: >/ I need to setup my laptop external monitor at 1366x768 while my />/ LCD is only 1024x768. Is this done by dual head selections in the />/ display configuration? / Setting up dual head machine. You can view an artcile on this at www.pcquest.com they carried this a few months back and you can search the archives from the search box. HTH and please report back success. -- Sudev Barar Learning Linux --- I was looking at dual head under the display settings menu - however, when I select my settings and click OK - NOTHING HAPPENS. The screen stays there and does not go away. Jerry

1 0

x windows setting up laptop external monitor at different resolution than LCD
by Jerry Geis 22 Nov '05

22 Nov '05

I need to setup my laptop external monitor at 1366x768 while my LCD is only 1024x768. Is this done by dual head selections in the display configuration? How is that accomplished? Thanks, Jerry

2 1

Re: [CentOS] SELinux threads, cynicism, one-upmanship, etc.
by Brian T. Brunner 22 Nov '05

22 Nov '05

Thanks, Mike. What I read is that SELinux is still 'beta', and while the need for good security is decades old, we (CentOS/RHEL folks) should not be presumed to be willing beta testers. "Enabled by default" presumes I'm willing. Brian Brunner brian.t.brunner(a)gai-tronics.com (610)796-5838 >>> lesmikesell(a)gmail.com 11/19/05 11:41AM >>> On Fri, 2005-11-18 at 22:42, Lamar Owen wrote: > Maybe I'm wrong, but I think any admin needs to experience having their box > cracked. It will produce the humbleness necessary to the trade, because > overconfidence is dangerous. Yes, but when the box gets cracked _because_ they are using the latest new thing their distribution added under the guise of increased security, as happened with ssh a while back, it also produces the attitude that new stuff should soak a long, long while in a distribution like fedora before going onto production boxes. You want to at least wait until the surprises stop - and I take the flurry of reports of broken apps at every update as an indication that they haven't stopped yet. Your analogy to a weapon was a good one. When the experts tuning the distribution still can't keep it from blowing up in peoples's faces some of the time, normal people should keep their distance. When the fedora and Centos lists go several months without a mysterious app failure caused by SELinux it will be time to reconsider. -- Les Mikesell lesmikesell(a)gmail.com _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos ******************************************************************* This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote also confirms that this email message has been swept for the presence of computer viruses. www.hubbell.com - Hubbell Incorporated

9 20

Ssh with OS X Tiger (Darwin) and CentOS 4.2
by Ryan Lum 22 Nov '05

22 Nov '05

Anyone know any issue with OS X 10.4 and CentOS with ssh or any connectivity issue with: OpenSSH_3.8.1p1 vs OpenSSH_3.9p1?

8 11

problem with yum
by Roger D Vargas 21 Nov '05

21 Nov '05

I installed centos 4.2 but I cant get yum working, i always get a timeout error with repodata/primary.xml.gz from base. How can i solve this? -- Roger D. Vargas http://dsgp.blogspot.com | Linux, programación, juegos ______________________________________________ Renovamos el Correo Yahoo! Nuevos servicios, más seguridad http://correo.yahoo.es

5 12

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss