Discuss

discuss@lists.centos.org

2 participants
34758 discussions

OT: ProFTPD web browser login
by Ed Morrison 13 Sep '05

13 Sep '05

I'm setting up a ftp server. I need to be able to have people have a non interactive login through a web browser into a chrooted directory i.e. ftp://somewhere.com. I also need to have a URL that will auto login a user to a chrooted directory. These chrooted directories will be RO for all anonymous access. That said I also need to have a staff account that has upload rights to these directories. Before I was able to use with Windowz FTP servers: ftp://user:password@somewhere.com. This does not pass with proftpd or vsftpd. Are there conf entries that will allow these? I know there are security risks associated with this but it is an environment I have to deal with anyway. Conf file: # This is the ProFTPD configuration file # $Id: proftpd.conf,v 1.1 2004/02/26 17:54:30 thias Exp $ ServerName "ProFTPD server" ServerIdent on "FTP Server ready." ServerAdmin root@localhost ServerType standalone DefaultServer on AccessGrantMsg "User %u logged in." DeferWelcome off DefaultRoot ~ !adm AuthPAMAuthoritative on IdentLookups off UseReverseDNS off Port 21 Umask 022 ListOptions "-a" AllowRetrieveRestart on AllowStoreRestart on MaxInstances 20 User nobody Group nobody ScoreboardFile /var/run/proftpd.score <Global> AllowOverwrite yes <Limit ALL SITE_CHMOD> AllowAll </Limit> </Global> LogFormat default "%h %l %u %t \"%r\" %s %b" LogFormat auth "%v [%P] %h %t \"%r\" %s" <Anonymous ~ftp> <Limit LOGIN> AllowAll </Limit> User ftp Group ftp AccessGrantMsg "Anonymous login ok, restrictions apply." UserAlias anonymous ftp DefaultChdir /pub <Limit WRITE SITE_CHMOD> DenyAll </Limit> <Limit STOR> DenyAll </Limit> <Limit READ> AllowAll </Limit> </Anonymous> Thanks, Ed

2 2

S-ata controller
by Admin 13 Sep '05

13 Sep '05

Hi List I have a problem with 2 drivers 1. Intel 1000 GT dosen't work correctly 2 Promise SATA 300 TX2 plus/TX4 dosen't work This is not a RAID card, just an S-ata controller for a new s-ata Hitachi 500 Gb drive I have tried CentOS-4.1 kernel, but sadly nothing Any clues anyone? Cheers Jan Erik

1 0

Does a list of compatible motherboards
by Todd Cary 13 Sep '05

13 Sep '05

Is there a list of compatible motherboards? My Abit BE7 is not compatible with either Centos 4.1 or Fedora 3; just RH 9. Any suggestions are welcomed.... Todd -- Ariste Software 200 D Street Ext Petaluma, CA 94952 (707) 773-4523

3 7

hourly log
by Robert 13 Sep '05

13 Sep '05

greetings on a simple CentOS 4 DNS server install i have the below info. crontab -l "shows nothing" pico /etc/crontab shows... SHELL=/bin/bash PATH=/sbin:/bin:/usr/sbin:/usr/bin MAILTO=root HOME=/ # run-parts 01 * * * * root run-parts /etc/cron.hourly 02 4 * * * root run-parts /etc/cron.daily 22 4 * * 0 root run-parts /etc/cron.weekly 42 4 1 * * root run-parts /etc/cron.monthly i have searched and looked and fiddled yet... ummm dunno... ...and i have nothing in /etc/cron.hourly or /etc/cron.d among other places yet ever hour my logfile gets touched so to speak with this stuff and i have virtually every daemon shutoff so i am trying to figure out what it is that is doing this and would sincerely appreciate any help. what did i space or forget please? Sep 11 05:01:01 ns1 crond(pam_unix)[27023]: session opened for user root by (uid=0) Sep 11 05:01:01 ns1 crond(pam_unix)[27023]: session closed for user root Sep 11 06:01:01 ns1 crond(pam_unix)[27027]: session opened for user root by (uid=0) Sep 11 06:01:01 ns1 crond(pam_unix)[27027]: session closed for user root Sep 11 07:01:01 ns1 crond(pam_unix)[27031]: session opened for user root by (uid=0) Sep 11 07:01:01 ns1 crond(pam_unix)[27031]: session closed for user root Sep 11 08:01:01 ns1 crond(pam_unix)[27035]: session opened for user root by (uid=0) Sep 11 08:01:01 ns1 crond(pam_unix)[27035]: session closed for user root im sure i am missing something really simple. tia and regards, - rh -- Robert - Abba Communications Computers & Internet Sales/Service www.abbacomm.net

2 1

Rpms for Teamspeak
by denis＠croombs.org 13 Sep '05

13 Sep '05

Any clues where I can find rpms for this (on Centos 4.x), I have tried a number of different site with no luck. Many thanks Denis

3 2

Boot process slow with rhgb quiet on
by Dave Gutteridge 12 Sep '05

12 Sep '05

If I boot with "rhgb quiet" off, my computer boots in 1 minute and 30 seconds. If I boot with "rhgb quiet" on, my computer boots in 3m11s. That's a long time to wait. Significantly, when booting with "rhgb quiet", right at the moment X takes over, there is a 1m36s pause where the screen is blank except for the hourglass cursor turning around and around. Of course, if my main priority was to simply boot quickly, I would simply remove the "rhgb quiet" option from the boot process. And I'm not opposed to doing that. However, this pause only started happening recently, so I wonder why it exists at all. When booting with "rhgb quiet" off, I tried to look for any errors or indications of a problem, but it seemed to boot mostly without pause or error. There was one message which was like an error warning, which said something about a "microcode device doesn't exist?". But text was moving across the screen quickly and I couldn't write down exactly what it said. Before I give in and remove the "rhgb quiet" option permanently, is there any way I might be able to diagnose and fix this delay problem? I'd rather be telling the computer how to boot, instead of it telling me. Dave

2 1

Hard drive DMA messages upon shutdown
by Edward Diener 12 Sep '05

12 Sep '05

I have 4 hard drives on my system. CentOS is in a logical partition on the first hard drive and there is a swap partition in a logical partition on the first hard drive which I have also told it to use. The other three hard drives contain various partitions, all of which I have hidden from CentOS which are primary partitions. I have as well hidden the primary partitions on the first hard drive also. While there are other Linux parttions I do not want CentOS to use them in any way right now. Yet when I restart or shutdown CentOS I get messages saying that there are DMA errors waiting for some hard disk event on another hard dribe before the OS eventually reboots or shuts down my system. I have checked the mount and nothing but the two partitions with which I have set up to run CentOS are mounted. Why then is CentOS trying to access other hard drives upon shutdown ? Is there some way that I can curtail the OS from doing so ?

1 0

Re: [CentOS] x86_64 Question (Solved)
by Brian T. Brunner 12 Sep '05

12 Sep '05

Hmmm... Looking at drivers/human.c starting at line 666 if (human.state_test(ALIVE)) then if (eval_actions(DUMB)) dumber(); else human.state_set(DEAD); Get used to it. Brian Brunner brian.t.brunner(a)gai-tronics.com (610)796-5838 >>> ethericalzen(a)gmail.com 09/12/05 03:06PM >>> Ignacio Vazquez-Abrams wrote: > On Mon, 2005-09-12 at 12:05 -0500, Alex White wrote: > >>Is there some linkage anyone can pass to me that tells me (not >>necessarily step by step) what options to pass to rpmbuild if I want >>to build a 32-bit app on the athlon64? > > > setarch i386 rpmbuild ... Well then, that was stupid of me. Told you it my dumb question of the year. I will refrain from stupidity for the rest of the year thank you very much. Sincerely, Alex White _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos ******************************************************************* This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote also confirms that this email message has been swept for the presence of computer viruses. www.hubbell.com - Hubbell Incorporated

1 0

php 5.0.5
by Bob Pierce 12 Sep '05

12 Sep '05

I see php 5.0.5 has been released. Are there plans to include this update in the centosplus repo for Centos4? Bob Pierce Systems Analyst Westman Communications Group pierceb(a)westmancom.com

2 1

Failing "yum --installroot=/mnt groupinstall base"
by Jesse Waters 12 Sep '05

12 Sep '05

Hello all, trying to do the below command. yum --installroot=/mnt groupinstall base i receive this error message. "You have enabled checking of packages via GPG keys. This is a good thing. However, you do not have any GPG public keys installed. You need to download the keys for packages you wish to install and install them. You can do that by running the command: rpm --import public.gpg.key" I have already imported the gpg keys in: /usr/share/rhn/RPM-GPG* /usr/share/doc/centos-release-4/RPM-GPG* I can yum install <package> without issue but when I try the groupinstall option it fails any suggestions? Regards, Jesse Waters

2 2

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss