Discuss

discuss@lists.centos.org

2 participants
34758 discussions

RPMs for CentOS
by Edward Diener 11 Sep '05

11 Sep '05

When looking for RPMs for CentOS 4.1 outside of the yum CentOS repositories, do I choose the version of a product which says for FC4, or what, if there is no specific version mentioned for CentOS ?

4 9

Returned mail: see transcript for details (fwd)
by Dag Wieers 11 Sep '05

11 Sep '05

Every post I do to this mailinglist is followed by a bounce message from "centos.5.warren(a)recursor.net". I have no clue why this is being send to me, afaics some IP address is being blacklisted but I am not related to it. Am I the only one who gets this and can we remove this person from the mailinglist ? Kind regards, -- dag wieers, dag(a)wieers.com, http://dag.wieers.com/ -- [all I want is a warm bed and a kind word and unlimited power] ---------- Forwarded message ---------- From: centos.5.warren(a)recursor.net To: dag(a)wieers.com Date: Sat, 10 Sep 2005 20:25:22 -0700 Subject: Returned mail: see transcript for details X-Spam-Status: No, score=0.2 required=5.0 tests=NO_REAL_NAME autolearn=no version=3.0.3 The original message was received at Sat, 10 Sep 2005 20:25:22 -0700 from localhost [127.0.0.1] ----- The following addresses had permanent fatal errors ----- <warsome(a)pacbell.net> (reason: 553 5.3.0 ylpvm30,DNSBL:To request removal of, 216.218.230.146, send the complete error message in an E-mail to removeme(a)sbc.sbcglobal.net) ----- Transcript of session follows ----- ... while talking to pbimail3.prodigy.net.: >>> MAIL From:<+centos+warren+d16c2d5125.dag#wieers.com(a)spamgourmet.com> <<< 553 5.3.0 ylpvm30,DNSBL:To request removal of, 216.218.230.146, send the complete error message in an E-mail to removeme(a)sbc.sbcglobal.net 501 5.6.0 Data format error

6 6

Linux Servers: Eccentric Practices for Disk Slicing
by Bryan J. Smith 11 Sep '05

11 Sep '05

The result of continued inquiry ... http://thebs413.blogspot.com/2005/09/linux-servers-eccentric-practices-for.… Not even spell-checked yet nor read-over well. I will clean it up later today. -- Bryan J. Smith b.j.smith(a)ieee.org http://thebs413.blogspot.com ---------------------------------------------------------------------- The best things in life are NOT free - which is why life is easiest if you save all the bills until you can share them with the perfect woman

1 0

CentOS core 4 PCMCIA and freezing in non-interactive startup
by Ryan Lum 11 Sep '05

11 Sep '05

I am having problems starting linux after a server install. First, let me say my setup is: semprom 1.8 dfi nf4x pci express x16 video card My bootup always freezes after Entering non-interactive startup. /etc/rc3.d/S00microcode_ctl: microcode device /dev/cpu/microcode doesn't exist? Checking for new hardware Starting cpuspeed: Apllying iptables firewall rules: Starting pcmcia: then it freezes. i have tried to install it with linux nopcmcia with no luck. Any ideas? is thee are way in rescue mode to remove the PCMCIA check from the bootup sequence? I've tried someone other installs like deskstop and custom, but it usually freezes around network.

2 2

NFSv4 "Missing" Data on Clients
by Jason McCormick 11 Sep '05

11 Sep '05

Hello all. I converted my server from Fedora Core 3 to CentOS 4.1 and I've been slogging unsuccessfully through an NFSv4 problem. I'm using the same configuration for NFS that I had in place on FC3 that worked. On the server, I have the following data structure: /data /data/archive /data/pictures /data/music Each is a separate ext3 filesystem mounted with rw,acl. /etc/exports presents all of these filesystems properly: # exportfs -v /data/pictures 172.17.17.0/27 (rw,wdelay,insecure,root_squash,no_subtree_check,anonuid=65534,anongid=65534) /data/archive 172.17.17.0/27 (rw,wdelay,insecure,root_squash,no_subtree_check,anonuid=65534,anongid=65534) /data/music 172.17.17.0/27 (rw,wdelay,insecure,root_squash,no_subtree_check,anonuid=65534,anongid=65534) /data 172.17.17.0/27 (rw,wdelay,insecure,root_squash,no_subtree_check,fsid=0,anonuid=65534,anongid=65534) All the the appropriate services are running (portmap, nfs, rpcidmapd). I've tried this with and without iptables enabled so I've ruled out firewall issues. When I mount the filesystem on the client, none of the "sub" mountpoints shows its content: # mount -t nfs4 server:/ /mnt/server # ls /mnt/server archive lost+found music pictures # ls /mnt/server/archive # Except that there's 15G of data in /data/archive on the server. File operations in /data that don't traverse the server-side mountpoints work fine (i.e. I've created /data/foo and performed reads and writes in there on the client). I know that this setup worked in Fedora 3 so I'm unable to account for the operational differences. Anyone have any thoughts? - Jason

1 0

Yum issues with swatch
by Ed Morrison 11 Sep '05

11 Sep '05

I am trying to install swatch via yum but it doesn't recognize swatch as being available. I have tried various naming conventions such as swatch-3 etc but still no go. I have Dags repo in yum.conf and I see it listed there on his webpage. In addition, I did a yum search swatch and still nada. Anyone have an idea as to why it will not install? I'm running CentOS 3.5 Thanks, Ed

5 18

CBQ and/or HTB help needed
by Joe Klemmer 11 Sep '05

11 Sep '05

Ok, this has been kicking my @$$ for weeks. I'm trying to get some kind of bandwidth shaping working on my server. I need to throttle ftp down so as not to suck up all the available bandwidth. I had cbq working on the old server (an ancient RH 6.2 box) so I figured I'd just move the config over and get cbq.init from sf.net and it should work. Unfortunately it doesn't. At least it doesn't work to the extent that no throttling of ftp is being done. So next I thought I'd try htb (as someone here mentioned it as an alternative). After printing out the entire section on bandwidth management from the lartc documentation I still can't seem to get anything working. I think I'm at the "forest/trees" point where I've been banging my head against this so much I'm missing something obvious. So, if anyone out there could lend a hand (or more precisely a pair of eyes) I would be greatly appreciative. To save list bandwidth, send replies to me and once I get things working I'll post a summery, with full credit attribution, to the list. Thanks in advance, Joe -- My Useless Vanity Page - http://www.webtrek.com/joe See my blog, sumo game ranks and other interesting junk

3 6

Re: Re: [CentOS] New User: Kudos, small/old platform, RPM Illegal
by Bill Maltby 10 Sep '05

10 Sep '05

Date: Mon, 29 Aug 2005 09:44:49 -0700 (PDT) From: "Bryan J. Smith" <b.j.smith(a)ieee.org> Bill Maltby <wild-bill(a)triad.rr.com> wrote: >> Picked an AMD 5x86 (equivalent to a Pentium 75 MHz) > > <snip> I run IPCop on i486, i586 (true Pentium) and i686 (Pentium Pro) systems. >> Anyway, my problem is that RPM traps with illegal >> instruction when a query all, among other combinations, >> is attempted. >> It does not do it on my AMD XP, but does do it on the old >> one. Possible that RPM was compiled with a later arch >> specified? > > Yes. The K6 is largely i686 compatible (sans cmov), so it at least runs the i586 installer. The 5x86 is definitely an i486. As much as some would mind me recommending another solution on the CentOS list, I feel I must. Consider IPCop 1.4. It is a "Linux from scratch" distro (no longer Red Hat Linux based as of 1.3.0 I believe, maybe it was 1.2.0?). ========================================================================== Bryan, IPCop installed and working fine. Thanks for the suggestion. Hope I edited this right. I'm not familiar with replying from a DIGEST form.

1 0

Software RAID setup ideas and an apology.
by Lamar Owen 10 Sep '05

10 Sep '05

The apology first. If I've offended anyone, or just annoyed anyone, I apologize for that. I sometimes can go 'off the deep end' when I'm being sarcastic (an old habit from my news.admin days when I ran a Usenet site in the early 90's), and I'll try to not go into news.admin mode here in the future. Now, the question. I have a few ideas about how to do this, but am not sure of the ideal way of doing it. It has to be a pretty common thing to do, so I'll ask it here. I have a server (Dell PE 1600SC) with two SCSI host adapters: a U320 LSI/MPT for internal drives only, and an Adaptec 39160 with two internal and two external U160 channels. I have set up a software RAID config with LVM2 on top (CentOS 4) with four 36GB 15K RPM Ultra 3 drives. The internal drives are set up with /dev/sda and /dev/sdb partitioned with 100MB /boot (for sda) and 100MB /boot2 (backup on sdb), and the rest of each drive as mirrors on a RAID1. /dev/sdc and sdd have each a single RAID partition and are likewise mirrors in a RAID1. So I have /dev/md0 and /dev/md1, which are then two parts of a physical volume with the various logical volumes under that. This works and performs well, all things considered. Now, the 39160 HBA is attached through one of its two channels to a donated Cisco Storage Array 12 with 12 18GB drives in it. Unfortunately, the second channel of the SA12 isn't working properly (it automatically configures split bus for the array if the second channel is activated), so I'm limited to a single channel with 12 drives on it. I have the hardware portion of this working, all drives are recognized, etc both at the Adaptec BIOS level and at the Linux kernel level (/dev/sde through /dev/sdp). My question is, what is the opinion of those on the list with experience in this area as to the 'best' method of joining these drives. I would like to be able to lose two or more drives and still have redundancy; I had thought about pairing drives in RAID1's and LVM over the array; and I had thought about a big RAID5. But I don't want to shoot performance through the foot, either. I don't have a good hardware RAID controller for this box, so that's not at this point an option (I have some hardware RAID controllers, but the ones that work ok with this array have much slower SCSI busses, and the boot up behavior of this particular array causes the good RAID controllers I do have with Ultra 3 interfaces to go crazy (the array powers up when it receives signal from the host adapter: not each drive, but the WHOLE ARRAY powers up on command; the DPT controllers I have simply refuse to recognize any drives at all on the bus, regardless of spinup delay (I set it to 60 seconds and still no joy; the 39160 recognizes all the drives just fine))). Maybe one of those slower controllers might be better than software RAID1; but at this point I'm open to suggestions. -- Lamar Owen Director of Information Technology Pisgah Astronomical Research Institute 1 PARI Drive Rosman, NC 28772 (828)862-5554 www.pari.edu

2 1

Missing libs on install
by Sam Drinkard 10 Sep '05

10 Sep '05

I've run across a couple of things I'm not quite sure why, but just discovered the libtermcap.* was not installed from the CD's. I would have thought the termcap libs would be part of the base install, and in fact, when I retrieved them with yum, it does show "base" or "core". Is this just some errant behavior one time or is something broken in the install? I've also found a couple more that did not get installed, but don't recall now what they were, but being part of base, I'd again, think they should be. OS is 4.1 x86-64 My previous question did not provide any answers about dpms, so I ask again.. I have dpms enabled, but the monitor will never suspend or turn off. xset q shows dpms enabled. I've tried with and without a screensaver and still the same thing. The monitor is a Samsung 192N (supported). Any ideas? -- Snowman

2 2

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss