Discuss

discuss@lists.centos.org

2 participants
34758 discussions

expert guideance needed on arrays with CentOS 4 installed on dual processor compaq server
by Robert Hanson 14 Aug '05

14 Aug '05

greetings, as most know i have some older dual processor Compaq playtoys that i am deploying CentOS 4 on and doing some real world'ish simulation of failure and regular server environment testing. i have searched www on some things to no avail so off to the experts for some guideance please? case of: a dual Pentium 3 processor 1850R with a smart array 221 controller and quantity (4) 18 Gig SCSI hard drives in default specs RAID5 array created by the controller and Compaq Smartstart CD and i set the RAID rebuild to "highest priority"... Then, i do a custom install without Gnome or KDE of course. linux text lowres nousb nousbstorage skipddc install CentOS 4 using autopartition with a /boot 1024MB i.e. 1Gig / approx 50,000MB i.e. 50Gig everything installed perfect and i rpm --import /usr/share/doc/centos-release-4/RPM-GPG-KEY imported the key and do a full yum update to latest greatest CentOS 4 packages.... Now, i am trying to get some perspective and pointers so i can learn more how to better understand what i really have here. i know i have a lot to learn in regards to managing RAID5 on CentOS 4 Should I have autopartitioned? Is LVM the best way to manage RAID5 on CentOS? What other tools are there on a default CentOS 4 install to manage my array? What tools should i install with yum install to learn more and help me with this situation? If i shutdown the machine, and yank out any drive, and replace it with an identical drive and fire the unit back up, it asks me if i want to rebuild the data. Are these Compaq arrays "hot swap" like i think they are? How "long" does that usually take for it to rebuild by the controller? Hours? Days? Months? ;-> Remember, this is a (4) 18gig drive system. Should I allow the machine to be in production, online, up and running while it is rebuilding the 4th disk? Yes, I get the error from the kernel... non fatal error on ida/c0d0 ....while the machine appears to be rebuilding the 4th disk in the array... What other CentOS software tools should I be aware of to help me here? I really really appreciate your help and pointers and will go check out all of the documentation that you folks will point me to. Please remember, these boxes are not "in production" right now, so this is not an emergency, yet i am trying to simulate a production environment for obvious reaasons. Thank you in advance and kind regards, - rh -- Robert Hanson Abba Communications http://www.abbacomm.net

2 1

SD Card Reader not being recognized
by Dave Gutteridge 14 Aug '05

14 Aug '05

I have a USB card reader that handles various card media, like SD cards, Sony Memory Sticks, and two other formats that I can't even remember what they are. I pretty much exclusively use it for SD cards. With Fedora, when I plugged the card reader into the USB port, and then inserted an SD card, it would automatically come up on the desk top. However, this is not the case with CentOS. Nothing comes up. Naturally, I searched Google for information, hoping that maybe it was just a matter of downloading an RPM or something. But I did not come across any information that helped. Is there a setting that I need to activate in order for CentOS to recognize SD Cards and/or the USB card reader? Dave

13 30

quick question on RAID 1
by Ulrik S. Kofod 14 Aug '05

14 Aug '05

I have 3 disks that I want to setup in a raid 1, my questions is should I setup the 3rd disk as a spare-disk or should I mirror all 3 disks all the time? Will it perform *much* better to only mirror two and have the 3rd as a spare. Is it not safer to mirror all 3 drives all the time ?

5 5

CentOS-4.1 Beta for Alpha arch
by Pasi Pirhonen 14 Aug '05

14 Aug '05

Hi, As usually, i haven't heard of anything about it. I can see that someone has downloaded it, but nothing more. I am now poking you once again to _say_ something about it. My vacation is coming near and the summer isn't afecting to temperature of my machine room so much anymore, so i intend to nail this to official release at time of CentOS-4.2 update release cycle. But i can't fix things i don't even know being broken. I do have things like compat-glibc now, but if there isn't going to be any feedback, i'll just package it with the fixes i do find necessary. Don't get this ranting wrong. I am just poking for info to make things better. -- Pasi Pirhonen - upi(a)iki.fi - http://iki.fi/upi/

1 0

OT: Good flash mp3 player for linux
by Mark Belanger 13 Aug '05

13 Aug '05

Can anyone recommend an flash mp3 player with around a 1 gig of memory that will work easily with linux. I had a a RAVE-MP that I was fairly happy with .... until I stepped on it :(. TIA, -Mark

2 1

SSH hostname login
by Kai 13 Aug '05

13 Aug '05

I run CentOS 4.1 on a remote server and did a minimal installation. My problem is that I can not login using the HOSTNAME, must use the IP. 1. edited the - /etc/sysconfig/network 2. changed - HOSTNAME=a266 3. restarted the network Looks ok, hostname appears when logged on via IP, but can't use the HOSTNAME to log on from client. --- [kai@localhost ~]$ ssh a266 ssh: a266: Name or service not known --- [kai@localhost ~]$ ssh 192.168.0.101 kai(a)192.168.0.101's password: Last login: Sat Aug 13 17:13:09 2005 from 192.168.0.102 [kai@a266 ~]$ --- I can't figure out where I missed out. kai

5 6

Re: [CentOS] MPPE required, but kernel has no support.
by James B. Byrne 13 Aug '05

13 Aug '05

On Thu, 11 Aug 2005 10:36:41 -0400 Tony Schreiner <schreian(a)bc.edu> wrote: > The sourceforge page http://pptpclient.sourceforge.net/ I am going the other way - from MS-Windows client to Linux Server VPN host - but this site has a module for redhat 9 kernel listed. Is this suitable for CentOS 4? Regards, Jim -- *** e-mail is NOT a secure channel *** James B. Byrne mailto:ByrneJB.<token>@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3CE delivery <token> = hal

2 1

Where to go for KDE questions.
by Dave Gutteridge 13 Aug '05

13 Aug '05

I've been trying, unsuccessfully, to log in on the KDE forums on the KDE web site. Unfortunately, despite having registered, my account is not "activated", and I can't post threads. I am also not able to email the forum administrator, as one ironically has to be an activated member to do so. I've also noticed that trying to search their forums results in a MySQL error. So does anyone have a recommendation for a different group or community on line where KDE questions would be welcome? Dave

3 8

cyrus-imapd - unable to connect to POP3
by Arun K. Khan 13 Aug '05

13 Aug '05

This is the first time I am using cyrus-imapd package. I am unable to retrieve messages (pop3). At first, I had not entered the cyrus-master in /etc/hosts.allow and was getting connection refused. After adding the entry I am able to connect to port 110 but for some reason the pop3 server is failing the password authentication (see below). With the same userid/passwd I am able to ssh into the server. What other configuration am I missing. $ telnet 192.168.1.21 110 Trying 192.168.1.21... Connected to 192.168.1.21. Escape character is '^]'. +OK saraswati.surya-group.com Cyrus POP3 v2.2.12-Invoca-RPM-2.2.12-3.RHEL4.1 server ready <82952692.1123769502(a)saraswati.surya-group.com> USER arunk +OK Name is a valid mailbox PASS ******** -ERR [AUTH] Invalid login TIA, -- Arun Khan <knura(a)yahoo.com> Linux is a wigwam: No Windows, No Gates, Apache inside.

4 5

Setting up YUM or APT
by duffmckagan 13 Aug '05

13 Aug '05

I am using Cent oS 4 and I would like to setup the YUM repositories. Can anybody help me setup YUM? THat would be to install software, add repositories, and such necessary stuff. I know how to use apt-get, but not on Cent OS ( I will use either YUM or APT, at a time, but learn both of them, sooner or later.) Thank you. -- "No-one dies a virgin. Life screws everyone."

2 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss