Discuss

discuss@lists.centos.org

2 participants
34758 discussions

The connection was refused when attempting to contact hostname:5500
by Joeffrey Betita 27 Jul '05

27 Jul '05

hello i successfully installed oracle 10g on CentOS 3 i can login at http://hostname:5500/em but after restarting the PC all i get is "The connection was refused when attempting to contact hostname:5500" thank you very much for your help. rgds, Joeffrey

6 17

RE: [CentOS] CentOS and Red Hat SATA drivers
by Kaplan, Andrew H. 27 Jul '05

27 Jul '05

Hi there -- The version number associated with the driver is 0. There is no further information available other than it was listed within the driver disk creation utility as a Red Hat Enterprise 3 driver. Versions 3.3 and 3.4 are the only two of the 3.x line that support the x86_64 architecture. Which version of the two would you recommend as a starting off point? -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Johnny Hughes Sent: Wednesday, July 27, 2005 12:57 PM To: CentOS mailing list Subject: Re: [CentOS] CentOS and Red Hat SATA drivers On Wed, July 27, 2005 11:51 am, Kaplan, Andrew H. said: > Hi there -- > > I was going to experiment with a CentOS x86_64 install in the following > manner: > One of our new dual-xeon servers is using an Adaptec SATA controller card > that > has drivers available for Red Hat Advanced Server 2.1 and Enterprise Linux > 3.0. > I was going to create the drivers for one or the other and then attempt an > install via the linux dd command. My question is, would either of these > drivers > work with a version of CentOS, and if so what version could I use? Thanks. Maybe ... Usually, the kernel version for the driver needs to match the kernel it is built for. So, you would use CentOS-3 or CentOS-2.1 and get the ISO that you need, based on the driver. We did not release a CentOS-3.0 ... so there is not a CD for that. What update # is the RHEL driver for (ie, RHEL-4 Update 2, etc.) You can find old CDs and trees here: http://vault.centos.org/ -- Johnny Hughes <http://www.HughesJR.com/> _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

CentOS and Red Hat SATA drivers
by Kaplan, Andrew H. 27 Jul '05

27 Jul '05

Hi there -- I was going to experiment with a CentOS x86_64 install in the following manner: One of our new dual-xeon servers is using an Adaptec SATA controller card that has drivers available for Red Hat Advanced Server 2.1 and Enterprise Linux 3.0. I was going to create the drivers for one or the other and then attempt an install via the linux dd command. My question is, would either of these drivers work with a version of CentOS, and if so what version could I use? Thanks.

2 1

RHCS/RHGFS rpms
by Feizhou 27 Jul '05

27 Jul '05

built for Centos 4, source from RHEL RHCS/RHGFS rpms in ftp.redhat.com/pub/redhat/linux/enterprise/os/RH{CS|GFS} kernel related rpms are built against i686 only. http://chantaipo.cjb.net:8080/pub/centos/4/RH{CS|GFS}/i386 only up2date works at the moment if you want to try them out.

2 2

SATA controller compatibility
by Michael Thon 27 Jul '05

27 Jul '05

Greetings - I'm looking to put some cheap storage into my server, which is running centos 3. I'm looking at the Maxtor SATA/150 PCI Card and a big maxtor sata drive. I would like to make sure that CentOS has driver for this controller. I looked in Red Hat's hardware database and did some google'ing but I couldn't find any info to confirm that this card is compatible. Any ideas where else to look? Thanks Mike

3 4

Looking for RPM perl-Net-Server-SMTP
by Nikos Zaharioudakis 27 Jul '05

27 Jul '05

Hi everybody, Has anyone come across the perl-Net-Server-SMTP rpm ? Any hint really appreciated -- ########################################3 Zaharioudakis Nikos mob: +30 6947204063

1 0

Extending LVM2 logical volumes [ was: Demonizing ... ]
by Collins Richey 27 Jul '05

27 Jul '05

[ context from the previous thread ] On Saturday 28 May 2005 14:41, Collins Richey wrote: > On 5/28/05, Lamar Owen <lowen(a)pari.edu> wrote: > > Sure. LVM. > I'm curious about this. At work we haven't finished our evaluation of > RHEL3/RHEL4 (CentOS is out of the question, since SLA is king here). > Most of our servers and desktops are RH9 legacy, and we use LVM on all > of them. It's my understanding that RHEL4(CentOS4) only offers LVM2, > and it doesn't appear that you can extend an ext3 filesystem using > LVM2 tools. If that is indeed true, why woud LVM be "measurably > better? While I am no LVM expert, it seems that ext2online does what you want. My CentOS4 box here has ext2online included; I have not had a chance to try it out, so I can't comment on how well it works. However, what I have read is that the LVM2 metadata format is more robust and removes many of the limitations of LVM1. In trying to check on this, I looked for specific information on how this was the case, but have not been able to at this point. The ext2/3 filesystem wasn't designed for resizing online, so it's quite nice one can do it at all; but it appears the LVM2 approach is to rely on the e2fsprogs to do the work, so, taking you question literally, no, there is no LVM2 tool to resize; you would do a two-step, resizing the logical volume then resizing the filesystem with e2fsprogs. But, having never had opportunity to do this, I have no direct experience with it. --- So, has anyone found an equivalent (even multiple commands that I could put in a script) for the e2fsadm utility to extend a logical volume? Anyone who has experience with ext2online? -- Collins Head teachers of the world unite: you have nothing to lose but the Start button.

3 5

Fighting some install issues with a new box
by Sean O'Connell 26 Jul '05

26 Jul '05

Folks- I have had a machine dropped in my lap that I am trying to get CentOS 4.1 to run on as a first pass (the hope is for it to eventually run Rocks -- http://www.rocksclusters.org , which uses CentOS 4.x as its underlying OS). The machine has 2 Opteron 250DP (2.4GHz) with 4 GB of RAM. It is using a Tyan Thunder K8WE (S2895A2NRF) motherboard with an nVidia nForce chipset -- http://www.tyan.com/products/html/thunderk8we.html. It is configured to boot from an SATA drive (80GB) and then use 3Ware 8506-8 card with 8x250GB SATA drives in a big raid 5 as a data store. So, CentOS appears to recognize the nics and find the boot drive well enough to go through a complete install. Now this is where things get "interesting" .. the install process hung for a very long period of time during the "installing grub" phase (this was a cd install, so no post or anything, done off-line). It finally rebooted, but it just hangs at the "GRUB Loading stage2..." If I boot the machine using the 4.1 install cd in rescue mode, I can see the filesystem (the OS is installed). /etc/grub.conf doesn't look unreasonable. One oddball thing is that I cannot see the 3ware card at all (doesn't show up in lspci output). Any thoughts? Anyone set up a similar beastie? Thanks. Sean

3 18

mount a partition when syste start
by Carlos Arellano 26 Jul '05

26 Jul '05

I want mount a partition permanent I mount a partition whit mount /dev/sdb1 /folder But when the system restart already isn't mounted that partition How can I do that? Thanks. Este correo fue escaneado y se encuentra libre de virus. Este correo fue escaneado y se encuentra libre de virus.

2 1

K3b or another alternative for CentOS 3.5?
by User Lists 26 Jul '05

26 Jul '05

Hi all, Somebody knows any application (gui if it is possible) to write CDs under Centos 3.5??. Thank you very much. __________________________________________________ Correo Yahoo! Espacio para todos tus mensajes, antivirus y antispam ¡gratis! Regístrate ya - http://correo.espanol.yahoo.com/

5 6

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss