Discuss

discuss@lists.centos.org

2 participants
34758 discussions

Start a nNew thread

CentOS-announce Digest, Vol 151, Issue 4
by centos-announce-request＠centos.org 15 Sep '17

15 Sep '17

1 0

TCP Wrappers
by Nick Lekkas 15 Sep '17

15 Sep '17

Hello there to all ! I have issues to make work the spawn on hosts.allow on a CentOS 7 system ? Has anyone succeed with this ..? Thanks in advance Nick __________ Information from ESET Endpoint Antivirus, version of detection engine 16085 (20170914) __________ The message was checked by ESET Endpoint Antivirus. Email message - is OK http://www.eset.com

1 0

lighttpd and cgi error reporting
by hw 15 Sep '17

15 Sep '17

Hi, is there a way to get error messages created by CGI perl programs (not fastCGI) logged with lighttpd? Apache used to put all errors into its error log and lighttpd does not. That makes debugging rather difficult.

1 1

Spurious Segmentation Fault after upgrade to 7.4
by Gerhard Schneider 15 Sep '17

15 Sep '17

After upgrading approx. 50 machines to 7.4 we discovered a reproducible SegFault of one of our commercial programs we use. This SegFault does not occur on CentOS 7.3 and it occurs only on Xeon E3-1230 V3, Xeon E5-2690 and Xeon E5-2697 v2. It does NOT occur on Xeon E5-2697 v3 and Xeon E3-1231 v3, AMD Ryzen and older Core I7-9xx. It is not dependent of the kernel, we switched back to an CentOS 7.3 kernel and forward to an Linux 4.11 kernel without success. When we run CentOS 7.3 as a guest on CentOS 7.4 in VMWare on affected CPUs the Segmentation Fault does not occur. Is there any processor specific optimzation dependency on the 7.4 glibc or any libraries I don't know? And what to do against it? Thank you in advance! Gerhard Schneider -- Gerhard Schneider Institute of Lightweight Design and e-Mail: gs(a)ilsb.tuwien.ac.at Structural Biomechanics (E317) Tel.: +43 1 58801 31716 TU Wien / Vienna / Austria Fax: +43 1 58801 31799 A-1060 Wien, Getreidemarkt 9/BE02 http://www.ilsb.tuwien.ac.at/~gs/

1 0

Running COS 7.1708 on VirtualBox 5.1.28
by Ken Gramm 15 Sep '17

15 Sep '17

Anyone else having issues getting the VB drivers to load on 1708? I keep gettting an "Error: unable to find the sources of your current Linux kernel..." message. I do have kernel-devel installed and I had no issues running 1611 on the same host. Thanks

2 3

Update to 7.4 using DVD
by Jerry Geis 14 Sep '17

14 Sep '17

I am attempting to update to 7.4 using the DVD I get these errors(truncated list) Error: Package: libgpod-0.8.3-14.el7.x86_64 (@epel) Requires: libusbmuxd.so.2()(64bit) Removing: usbmuxd-1.0.8-11.el7.x86_64 (@anaconda) libusbmuxd.so.2()(64bit) Obsoleted By: usbmuxd-1.1.0-1.el7.x86_64 (c7-media) Not found Error: Package: network-manager-applet-1.4.0-2.el7.x86_64 (@base) Requires: libnma(x86-64) = 1.4.0-2.el7 Removing: libnma-1.4.0-2.el7.x86_64 (@base) libnma(x86-64) = 1.4.0-2.el7 Updated By: libnma-1.8.0-3.el7.x86_64 (c7-media) libnma(x86-64) = 1.8.0-3.el7 Error: Package: ipa-python-compat-4.4.0-14.el7.centos.7.noarch (@updates) Requires: ipa-common = 4.4.0-14.el7.centos.7 Removing: ipa-common-4.4.0-14.el7.centos.7.noarch (@updates) ipa-common = 4.4.0-14.el7.centos.7 Updated By: ipa-common-4.5.0-20.el7.centos.noarch (c7-media) ipa-common = 4.5.0-20.el7.centos Error: Package: jansson-devel-2.4-6.el7.x86_64 (@base) Requires: jansson = 2.4-6.el7 Removing: jansson-2.4-6.el7.x86_64 (@anaconda) jansson = 2.4-6.el7 Updated By: jansson-2.10-1.el7.x86_64 (c7-media) jansson = 2.10-1.el7 Error: Package: graphite2-devel-1.3.6-1.el7_2.x86_64 (c7-media) Requires: graphite2(x86-64) = 1.3.6-1.el7_2 Installed: graphite2-1.3.10-1.el7_3.x86_64 (@updates) graphite2(x86-64) = 1.3.10-1.el7_3 Available: graphite2-1.3.6-1.el7_2.x86_64 (c7-media) graphite2(x86-64) = 1.3.6-1.el7_2 Error: Package: ipa-python-compat-4.4.0-14.el7.centos.7.noarch (@updates) Requires: python2-ipalib = 4.4.0-14.el7.centos.7 Removing: python2-ipalib-4.4.0-14.el7.centos.7.noarch (@updates) python2-ipalib = 4.4.0-14.el7.centos.7 Updated By: python2-ipalib-4.5.0-20.el7.centos.noarch (c7-media) python2-ipalib = 4.5.0-20.el7.centos Error: Package: grilo-devel-0.2.12-2.el7.x86_64 (@base) Requires: libgrlnet-0.2.so.0()(64bit) Removing: grilo-0.2.12-2.el7.x86_64 (@anaconda) libgrlnet-0.2.so.0()(64bit) Updated By: grilo-0.3.3-1.el7.x86_64 (c7-media) ~libgrlnet-0.3.so.0()(64bit) Error: Package: mesa-libgbm-devel-11.2.2-2.20160614.el7.x86_64 (@base) Requires: mesa-libgbm(x86-64) = 11.2.2-2.20160614.el7 Removing: mesa-libgbm-11.2.2-2.20160614.el7.x86_64 (@base) mesa-libgbm(x86-64) = 11.2.2-2.20160614.el7 Updated By: mesa-libgbm-17.0.1-6.20170307.el7.x86_64 (c7-media) mesa-libgbm(x86-64) = 17.0.1-6.20170307.el7 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest I have ran the rpm -Va --nofiles --nodigest did no help, I ran with the --skip-broken and then all these files are skipped, including new kernel. What else can I run to install these files ? I'm doing this from the mounted DVD yum --disablerepo=\* --enablerepo=c7-media update Thanks, Jerry

6 18

Re: [CentOS] Intel Skylake Server
by Mark (Netbook) 14 Sep '17

14 Sep '17

Hello, I have a pre-production Intel Skylake server using dual 8176 processors (28 core @2.1Ghz) I have loaded from the DVD distribution CentOS 7.3 and RHEL 7.4 with no problems. When I try and load CentOS 6.9 the boot process hangs just as the Anaconda graphics is started for CentOS configuration. If I use a secondary graphics card then the process completes with no problems and CentOS boots from the system disk error free. The server uses AST2500 graphics as standard. This seems to be the problem. What I need is an iso file that I can load during the initial boot process. I have tried various grub options and they don’t work. The reason that I am trying CentOS 6.9 is that many people have applications which will only run on CentOS 6.*. Regards, Mark Woolfson MW Consultancy Ltd Leeds LS18 4LY United Kingdom Tel: +44 113 259 1204 Mob: +44 786 065 2778 --- This email has been checked for viruses by AVG. http://www.avg.com

3 3

vmware player 12.5.7 with CentOS 7.4
by Jerry Geis 14 Sep '17

14 Sep '17

hi all - anyone find a way to get vmware player 12.5.7 working with 7.4? Thanks - everything good with the upgrade except that. Great job CentOS team! Jerry starting vmplayer I get the following: Note: adwaita is installed. canberra is installed No idea what pk is ? vmplayer (vmware-modconfig:12595): Gtk-WARNING **: Unable to locate theme engine in module_path: "adwaita", /usr/share/themes/Adwaita/gtk-2.0/main.rc:733: error: unexpected identifier `direction', expected character `}' (vmware-modconfig:12595): Gtk-WARNING **: Unable to locate theme engine in module_path: "adwaita", /usr/share/themes/Adwaita/gtk-2.0/hacks.rc:28: error: invalid string constant "normal_entry", expected valid string constant Gtk-Message: Failed to load module "pk-gtk-module": libpk-gtk-module.so: cannot open shared object file: No such file or directory Gtk-Message: Failed to load module "canberra-gtk-module": libcanberra-gtk-module.so: cannot open shared object file: No such file or directory Stopping vmware (via systemctl): [ OK ] Using kernel build system. make: Entering directory `/tmp/modconfig-piDjEW/vmnet-only' /usr/bin/make -C /lib/modules/3.10.0-693.2.2.el7.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \ MODULEBUILDDIR= modules make[1]: Entering directory `/usr/src/kernels/3.10.0-693.2.2.el7.x86_64' CC [M] /tmp/modconfig-piDjEW/vmnet-only/driver.o CC [M] /tmp/modconfig-piDjEW/vmnet-only/hub.o CC [M] /tmp/modconfig-piDjEW/vmnet-only/userif.o CC [M] /tmp/modconfig-piDjEW/vmnet-only/netif.o CC [M] /tmp/modconfig-piDjEW/vmnet-only/bridge.o CC [M] /tmp/modconfig-piDjEW/vmnet-only/procfs.o CC [M] /tmp/modconfig-piDjEW/vmnet-only/smac.o CC [M] /tmp/modconfig-piDjEW/vmnet-only/smac_compat.o CC [M] /tmp/modconfig-piDjEW/vmnet-only/vnetEvent.o In file included from include/linux/pci.h:35:0, from /tmp/modconfig-piDjEW/vmnet-only/compat_netdevice.h:27, from /tmp/modconfig-piDjEW/vmnet-only/netif.c:43: include/linux/pci_ids.h:2251:0: warning: "PCI_VENDOR_ID_VMWARE" redefined [enabled by default] #define PCI_VENDOR_ID_VMWARE 0x15ad ^ In file included from /tmp/modconfig-piDjEW/vmnet-only/net.h:38:0, from /tmp/modconfig-piDjEW/vmnet-only/vnetInt.h:26, from /tmp/modconfig-piDjEW/vmnet-only/netif.c:42: /tmp/modconfig-piDjEW/vmnet-only/vm_device_version.h:56:0: note: this is the location of the previous definition #define PCI_VENDOR_ID_VMWARE 0x15AD ^ In file included from /tmp/modconfig-piDjEW/vmnet-only/netif.c:43:0: /tmp/modconfig-piDjEW/vmnet-only/netif.c: In function ‘VNetNetifStartXmit’: /tmp/modconfig-piDjEW/vmnet-only/compat_netdevice.h:343:46: error: ‘struct net_device’ has no member named ‘trans_start’ #define compat_netif_trans_update(d) do { (d)->trans_start = jiffies; } while (0) ^ /tmp/modconfig-piDjEW/vmnet-only/netif.c:468:4: note: in expansion of macro ‘compat_netif_trans_update’ compat_netif_trans_update(dev); ^ make[2]: *** [/tmp/modconfig-piDjEW/vmnet-only/netif.o] Error 1 make[2]: *** Waiting for unfinished jobs.... In file included from /tmp/modconfig-piDjEW/vmnet-only/net.h:38:0, from /tmp/modconfig-piDjEW/vmnet-only/vnetInt.h:26, from /tmp/modconfig-piDjEW/vmnet-only/bridge.c:52: /tmp/modconfig-piDjEW/vmnet-only/vm_device_version.h:56:0: warning: "PCI_VENDOR_ID_VMWARE" redefined [enabled by default] #define PCI_VENDOR_ID_VMWARE 0x15AD ^ In file included from include/linux/pci.h:35:0, from /tmp/modconfig-piDjEW/vmnet-only/compat_netdevice.h:27, from /tmp/modconfig-piDjEW/vmnet-only/bridge.c:51: include/linux/pci_ids.h:2251:0: note: this is the location of the previous definition #define PCI_VENDOR_ID_VMWARE 0x15ad ^ make[1]: *** [_module_/tmp/modconfig-piDjEW/vmnet-only] Error 2 make[1]: Leaving directory `/usr/src/kernels/3.10.0-693.2.2.el7.x86_64' make: *** [vmnet.ko] Error 2 make: Leaving directory `/tmp/modconfig-piDjEW/vmnet-only' Starting vmware (via systemctl): Job for vmware.service failed because the control process exited with error code. See "systemctl status vmware.service" and "journalctl -xe" for details. [FAILED]

2 1

Re: [CentOS] JRE 8.1 for CentOS6
by ejm 14 Sep '17

14 Sep '17

> When I put in http it changes it back to https That's common now that everyone puts re-directs in to force everyone to use https. Can you get to the Apache logs on the remote machine? They may have more info. The error about Java 1.8 might be a red-herring. If the remote machine uses Perl on the backend, you might try setting the shell env variable OPENSSL_PREFIX to point on your local CentOS6 box to a newer version of openssl that handles the TLS handshake. The CPAN module Net::SSLeay uses that variable (if set) to use the specified OpenSSL library. --Ed

3 2

CentOS-announce Digest, Vol 151, Issue 3
by centos-announce-request＠centos.org 14 Sep '17

14 Sep '17

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. Release for CentOS Linux 7 (1708) on x86_64 (Karanbir Singh) 2. Release for CentOS 7.4.1708 for AArch64/ARM64 (Jim Perrin) 3. Release for CentOS Linux 7 (1708) on armhfp (Fabian Arrotin) 4. CESA-2017:2685 Moderate CentOS 7 bluez Security Update (Johnny Hughes) 5. CESA-2017:2679 Important CentOS 7 kernel Security Update (Johnny Hughes) 6. Updates for CentOS Linux 7 (1708) through 9/11/2017 (Johnny Hughes) 7. Release for CentOS Linux 7 (1708) on ppc64le (James O'Connor) 8. Release for CentOS Linux 7 (1708) on ppc64 (James O'Connor) ---------------------------------------------------------------------- Message: 1 Date: Wed, 13 Sep 2017 20:48:27 +0100 From: Karanbir Singh <kbsingh(a)centos.org> To: CentOS Announcements List <centos-announce(a)centos.org> Subject: [CentOS-announce] Release for CentOS Linux 7 (1708) on x86_64 Message-ID: <93441a2b-09f1-3577-6f02-76cace36ba3f(a)centos.org> Content-Type: text/plain; charset="utf-8" I am pleased to announce the general availability of CentOS Linux 7 (1708) for 64 bit x86 compatible machines. Effectively immediately, this is the current release for CentOS Linux 7 and is tagged as 1708, derived from Red Hat Enterprise Linux 7.4 As always, read through the Release Notes at : http://wiki.centos.org/Manuals/ReleaseNotes/CentOS7 - these notes contain important information about the release and details about some of the content inside the release from the CentOS QA team. These notes are updated constantly to include issues and incorporate feedback from the users. ---------- Updates, Sources, and DebugInfos Updates released since we froze the iso and install media content are posted in the updates repo along with the release. This will include content from late Aug 2017 and Sept 2017, therefore anyone running a new install is highly encouraged to run a 'yum update' operation immediate on install completion. You can apply all updates, including the content released today, on your existing CentOS Linux 7/x86_64 machine by just running 'yum update'. As with all CentOS Linux 7 components, this release was built from sources hosted at git.centos.org. In addition, SRPMs that are a byproduct of the build (and also considered critical in the code and buildsys process) are being published to match every binary RPM we release. Sources will be available from vault.centos.org in their own dedicated directories to match the corresponding binary RPMs. Since there is far less traffic to the CentOS source RPMs compared with the binary RPMs, we are not putting this content on the main mirror network. If users wish to mirror this content they can do so using the reposync command available in the yum-utils package. All CentOS source RPMs are signed with the same key used to sign their binary counterparts. Developers and end users looking at inspecting and contributing patches to the CentOS Linux distro will find the code hosted at git.centos.org far simpler to work against. Details on how to best consume those are documented along with a quick start at : http://wiki.centos.org/Sources Debuginfo packages are also being signed and pushed. Yum configs shipped in the new release file will have all the context required for debuginfo to be available on every CentOS Linux install. This release supersedes all previously released content for CentOS Linux 7, and therefore we highly encourage all users to upgrade their machines. Information on different upgrade strategies and how to handle stale content is included in the Release Notes. Note that older content, obsoleted by newer versions of the same applications are trim'd off from repos like Extras/ and Plus/ However this time we have also extended this to the sIG content hosted at mirror.centos.org, and some older End of Life content has been dropped. Everything we ever release, is always available on the vault service for people still looking for and have a real need for it. ---------- Download In order to conserve donor bandwidth, and to make it possible to get the mirror content sync'd out as soon as possible, we recommend using torrents to get your initial installer images: Details on the images are available on the mirrors at http://mirror.centos.org/centos/7/isos/x86_64/0_README.txt - that file clearly highlights the difference in the images, and when one might be more suitable than the others. The sizes, sha256 sums for the ISO files: ec7500d4b006702af6af023b1f8f1b890b6c7ee54400bb98cef968b883cd6546 CentOS-7-x86_64-DVD-1708.iso ( 4.2G) 8593f5a1631ebfb7581193a7b4ef96d44f500d3ceb49cc4cfbfd71d5698e4173 CentOS-7-x86_64-Everything-1708.iso ( 8.1G) 9941f5e1257d74e763652ceae5096ed73ddc94a9703ae116931d8713b801fec0 CentOS-7-x86_64-LiveGNOME-1708.iso ( 1.2G) 4ba63634a8430d134d8a9535c62ff1341c33c898fb1c768a0c6e54fbc92a9133 CentOS-7-x86_64-LiveKDE-1708.iso ( 1.7G) bba314624956961a2ea31dd460cd860a77911c1e0a56e4820a12b9c5dad363f5 CentOS-7-x86_64-Minimal-1708.iso ( 792 M) fe3d960cce4d2c1c9f1b66817fe87cc0ee1a1c6c5dd126204cb5c33d51a45620 CentOS-7-x86_64-NetInstall-1708.iso ( 422 M) Information for the torrent files and sums are available at http://mirror.centos.org/centos/7/isos/x86_64 -------- Additional Images The container, Vagrant, Cloud and Atomic Host images are being prepared and will be released in the next few days. Look for an announcement posted to the centos-announce list for more information on availability for these in the coming days. ---------- Dojo We try and organise Dojos in various parts of the world as a one day event, to bring together people who use CentOS and others who are keen to learn about CentOS. The day's focus is on sharing technical knowledge and success stories. It's also a great place to meet and talk about upcoming technologies and learn how others are using them on CentOS Linux. The next Dojo coming up is on the 20th Oct hosted by CERN, in Switzerland. Details for this are available on https://indico.cern.ch/event/649159/ ( please note that you must register ahead of time to attend ) ---------- Getting Help The CentOS ecosystem is sustained by community driven help and guidance. The best place to start for new users is at http://wiki.centos.org/GettingHelp We are also on social media, you can find the project: on Twitter at : http://twitter.com/CentOSProject on Facebook at : https://www.facebook.com/groups/centosproject/ on LinkedIn at : https://www.linkedin.com/groups/22405 And you will find the core team and a majority of the contributors on irc, on freenode.net in #centos ; talking about the finer points of distribution engineering and platform enablement. ---------- Contributors This release was made possible due to the hard work of many people, foremost on that list are the Red Hat Engineers for producing a great distribution and the CentOS QA team, without them CentOS Linux would look very different. Many of the team went further and beyond expectations to bring this release to you, and I would like to thank everyone for their help. We are also looking for people to get involved with the QA process in CentOS, if you would like to join this please introduce yourself on the centos-devel list (http://lists.centos.org/mailman/listinfo/centos-devel ). As some people would have noticed there is no i686 build for 1708 as yet - we have run into a couple of build and dependency issues that could use help. So if you are keen to get involved this is a great opportunity. Finally, please join me in thanking the donors who all make this possible for us. Enjoy the fresh new release! -- Karanbir Singh, Project Lead, The CentOS Project +44-207-0999389 | http://www.centos.org/ | twitter.com/CentOS GnuPG Key : http://www.karan.org/publickey.asc

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss