Discuss

discuss@lists.centos.org

7 participants
34743 discussions

fresh install - resolv.conf error?
by Troy Engel 13 Apr '04

13 Apr '04

Before I submit as a bug, has anyone else encountered -- doing a fresh, clean install of CentOS-3 results in a resolv.conf with only my secondary nameserver listed and the search domain. The install works fine, the eth0 and eth1 (onboard e100's) are detected, all the right info entered, etc -- typical by the book textmode (not GUI) install that I'd normally do with RH9/RHEL3. Static IP eth0, 2 nameservers, eth1 unused left at defaults. Anyone else confirm? Unfortunately the machine is already in production, so wiping and retrying to confirm isn't an option for me. Shoulda thought of that sooner... -te -- Troy Engel | Systems Engineer Fluid, Inc | http://www.fluid.com

2 2

Out of the woodwork
by donavan nelson 13 Apr '04

13 Apr '04

Greetings Everyone, I finally got around to downloading and installing CentOS 3.1. Performed flawlessly :) Any of my whitebox friends still around here? I've been extremely busy with work as of late....I'm still considering getting involved with CentOS. -- Donavan Nelson donavan(a)whiteboxlinux.net http://whiteboxlinux.net

2 1

Re: Upgrade install using CentOS-3.1 ISO images (Bart Schaefer)
by Jeff Thomas - KD4EVB 11 Apr '04

11 Apr '04

Be curious myself as to what info you come up with on the "upgrade via ISO" and "SATA" support questions you posed. Hopefully someone on the list will help you out with a reply to the list. JT > Message: 1 > Date: Sat, 3 Apr 2004 19:47:15 -0800 (PST) > From: Bart Schaefer <schaefer(a)zanshin.com> > To: centos(a)caosity.org > Subject: [Centos] Upgrade install using CentOS-3.1 ISO images > > Cutting straight to the chase: > > When, if ever, does the installer offer an option to upgrade an existing > installation, rather than wanting to reformat the disks? > > More details than you may want: > > I recently acquired a new PC chassis, with no operating system but with a > Serial-ATA disk (which I was not expecting when I ordered it). I set the > BIOS for legacy IDE mode and installed RedHat 9, then attempted to upgrade > the kernel to add SATA support, without much luck. > > Searching for the SATA driver modules I found CentOS and decided to try > it. I downloaded the three ISO images to another PC, burned CDs, and set > about to upgrade my RH9. However, the installer never offered me the > option of upgrading (keeping my existing filesystems) -- no matter what > steps I tried using when starting the installer, by the time it got to the > page for disk partitioning it always wanted to start from scratch and blow > the existing partitions away. > > I finally concluded that I hadn't put anything important on the disks > during my struggle with RH9, so I went ahead with the clean install. > Everything is working nicely at this point, so thanks for that. > > However, there are some other RH9 systems around the office that may need > to be upgraded at some point, and they definitely can't be wiped clean in > the process. Is there a way to upgrade from RH9 to CentOS? > > Any remarks about upgrading from even older RedHat releases? > > >

5 4

Status of CentOS 2.1
by Janis Pinkis 08 Apr '04

08 Apr '04

Hi! What is status of CentOS 2.1? Is it still developed, when is a stable release planed? Can i use it for non-critical production? What i can do, to help with CentOS 2.1? Regards J.Pinkis

2 3

Mounting Windows partition
by Prasanth S 07 Apr '04

07 Apr '04

Hello, I have recently installed CentOS 3.1 on my laptop and its a dual boot with XP on hda1. I was trying to mount that partion on to /mnt/XP. I have a problem here, when i say df, the listing does not show the XP partion (ntfs/hpfs filesystem). Obviously this can be diagnosed as my kernel does not have the appropriate module (Kernel version 2.4.21-9). I came to know that there is one kernel-ntfs rpm which can help us out here. Could some one get me the link for the appropriate download, as i cant find anything for that kernel version. any new suggestions are highly welcome. Thanks in advance. __________________________________ Do you Yahoo!? Yahoo! Small Business $15K Web Design Giveaway http://promotions.yahoo.com/design_giveaway/

1 0

Re: Mounting windows partition
by Ixen Rodríguez Pérez 07 Apr '04

07 Apr '04

Yes, there is a kernel-ntfs rpm module... you can find it at... http://sorceforge.net/linux-ntfs/ S@l2, -- GNU/Linux Proud User #313158 Ixen Rodríguez Pérez Administrador de Red Nodo CANARREOS EHT Isla de la Juventud FORMATUR. Cuba. Teléfono: 53(046)322039 Fax: 53(046)324924 E-mail: SysAdmin(a)ehtij.co.cu ixenrp(a)ehtij.co.cu URL:http://www.ehtij.co.cu/ -- Este mensaje ha sido analizado por MailScanner en busca de virus y otros contenidos peligrosos, y se considera que está limpio. MailScanner Protección contra Virus de E-mail www.mailscanner.info Nodo Canarreos EHT Isla de la Juventud postmaster(a)ehtij.co.cu

1 0

Upgrade install using CentOS-3.1 ISO images
by Bart Schaefer 06 Apr '04

06 Apr '04

[This message was held for moderation because the mailing list software doesn't recognize <schaefer@...> and <schaefer+centos@...> as equivalent. That was last Friday, but still no sign of the moderator dealing with it, so I'm resending.] Cutting straight to the chase: When, if ever, does the installer offer an option to upgrade an existing installation, rather than wanting to reformat the disks? More details than you may want: I recently acquired a new PC chassis, with no operating system but with a Serial-ATA disk (which I was not expecting when I ordered it). I set the BIOS for legacy IDE mode and installed RedHat 9, then attempted to upgrade the kernel to add SATA support, without much luck. Searching for the SATA driver modules I found CentOS and decided to try it. I downloaded the three ISO images to another PC, burned CDs, and set about to upgrade my RH9. However, the installer never offered me the option of upgrading (keeping my existing filesystems) -- no matter what steps I tried using when starting the installer, by the time it got to the page for disk partitioning it always wanted to start from scratch and blow the existing partitions away. I finally concluded that I hadn't put anything important on the disks during my struggle with RH9, so I went ahead with the clean install. Everything is working nicely at this point, so thanks for that. However, there are some other RH9 systems around the office that may need to be upgraded at some point, and they definitely can't be wiped clean in the process. Is there a way to upgrade from RH9 to CentOS? Any remarks about upgrading from even older RedHat releases?

1 0

gpg key
by syv 06 Apr '04

06 Apr '04

Hi, I am trying to yum some packages and it does not work. I get: yum install lynx Gathering header information file(s) from server(s) Server: CentOS-3.1 - Addons Server: CentOS-3.1 - Base Server: CentOS-3.1 - Extras Server: CentOS-3.1 - Testing Server: CentOS-3.1 - Updates Finding updated packages Downloading needed headers Resolving dependencies Dependencies resolved I will do the following: [install: lynx 2.8.5-11.i386] Is this ok [y/N]: y Getting lynx-2.8.5-11.i386.rpm lynx-2.8.5-11.i386.rpm 100% |=========================| 1.5 MB 00:12 Error: Unsigned Package /var/cache/yum/addons/packages/lynx-2.8.5-11.i386.rpm Error: You may want to run yum clean or remove the file: /var/cache/yum/addons/packages/lynx-2.8.5-11.i386.rpm Error: You may need to disable gpg checking to install this package I did: rpm --import http://mirror.centos.org/centos/3.1/i386/RPM-GPG-KEY-CentOS-3 I get: rpm -qa gpg* gpg-pubkey-db42a60e-37ea5438 gpg-pubkey-025e513b-40561173 rpm -qi gpg-pubkey-db42a60e-37ea5438 <<< redhat rpm -qi gpg-pubkey-025e513b-40561173 <<< centos Name : gpg-pubkey Relocations: (not relocatable) Version : 025e513b Vendor: (none) Release : 40561173 Build Date: Mon 05 Apr 2004 05:25:44 PM PDT Install Date: Mon 05 Apr 2004 05:25:44 PM PDT Build Host: localhost Group : Public Keys Source RPM: (none) Size : 0 License: pubkey Signature : (none) Summary : gpg(CentOS-3 Key <centos-3key(a)caosity.org>) Description : -----BEGIN PGP PUBLIC KEY BLOCK----- Version: rpm-4.2.2 (beecrypt-3.0.0) mQGiBEBWEXMRBACwv6ybAZQEyqFvVXnVmTk5Pvt/k701xbdYFkh/GbolGKhvW0OQzSK0zffe BXrqJHnfWGxOjXvhQVq9miOQUtTCk65s6dZF4HbXRmgQynVAj19S0AxwwqzVZzZAbbNz4Y5M u/UOflR7n5WcNmES1ynFqRsmFWsypIJFrT3gGMC4gwCgmHevld/ebabzVqkk1JjFMoxA0DED /3OJ0IohANLmDe7eAmT8IRIlWb+HPfi2pfhYCjYv/g1nc+0hBPaZtrvFuboaQfUh7vqcVza+ Ti/A1kPsTwDiXClV/njzow04Qx9K2TKLE+Jad9kd9/mJGM2JeUFvbPYFQaIBP6ZW8pibZI7Y KGQ1Rwmv6wCjlQ06ABHetIgV5sOcA/sHFomRwY+aTGxM4Bd0XUZW0Hjj2FP5/38yfWflhDLG SDeJPuwMk+Y5JlTzFfMMeNsMMdGk9Hn7vysKrQwXbZcpS+WmopA8jWg77jhHIXZKLJYdySCD lxsOixG2NBmRS9HQHh/d8OfCEh4tg1VLKhVmkZRpWdHcmxueJfkx3zzMX7QmQ2VudE9TLTMg S2V5IDxjZW50b3MtM2tleUBjYW9zaXR5Lm9yZz6IXwQTEQIAHwUCQFYRcwUJCWYBgAQLBwMC AxUCAwMWAgECHgECF4AACgkQcEnkTQJeUTsPjgCdFVLLKgeMpqc8gFdmHW9pQxtRRKoAoIYp vPOIb1nj88gpx4aYbxcw+S/5iEwEExECAAwFAkBWHykFgwll88oACgkQKN6I1rmRG5KRxACf QOzZp6ComvGfvkPFuJRd9QvVx48AnAvY/AqekJxd/y6TGOQvrmm8CoxWuQINBEBWEZEQCADQ 48xpVDl9w3PlwgauoGaysDgyc8OAkzAM6IPb/Ma068l73y58KJXdBLCTDFbCQb/O29wE7iw8 V/MXqBRl6aWzKkdnkA2RzDHoMqYGHrMUwO8y74l/Crw24b5gzhOkHwZGeuCEHbXyt6h1oYJB s239vyvQF/l5EIUFCRiaYT1Y4tGdeGoCwNEdVCOBz5r9F7ebJaT0rK+cFwMEk3mLXmxYz2w9 NdKS9R8wytIRZDCLY2XadmPKfcZje1tdp0b/z+jbXw1iIs1hbje0kLvC88OSp5Ss0oN0zN2H NZT59mdnqlLlUpNApS1Ev6pPB5ZAvdi43IJdVDKgsp+SSwCy/85TAAMFB/92Z967/FsFxShW +6t7ShI3Y1PF4hVyK3wDF1I83b7Ff+IwFh8YhPt2x8AWTxJRWAoIrtzhG+zEmUjm19dRqeB3 tI3zTqNSkl15IIVGElhv8PFET9UwZblHLVW4LQEqbOIeFlTnjSnbdfh05Qzx0J+eJnMdgBhQ ajItE7R74O5Yx5Dqaat641FxT6cZUtRUcd+tQ58tMkIcK1ZvRiRTC6WkwfULpiRUvG4N+NhC WlfjGUfvcoMuThqkjU3qeVS3hlH2T1MqJMilUUZFN5laLXv9oQFJZReF64mrQBQzueqjtkWE bVqoji1ThdPQTeLgn9SSewZfX584+BMZSkhNBP8ViEwEGBECAAwFAkBWEZEFCQlmAYAACgkQ cEnkTQJeUTsx4wCfZZPhJKRCXgwX7UB9YwDaSFQK8IgAoJgy+aCPMUCH6WUFPVRf49q56+9r =4XKu -----END PGP PUBLIC KEY BLOCK----- This ALMOST matches the one from the web site [different line breaks] Any suggestion? -- Thanks syv(a)911networks.com When the network has to work

3 3

GPG key not installed?
by Troy Engel 05 Apr '04

05 Apr '04

Just installed v3.1, bringing it up to date to work with. It doesn't appear that RPM-GPG-KEY-CentOS-3 was installed anywhere on the system? (easy to find on a CD/google sure, but I'd think it should be installed for easy import?) -te -- Troy Engel | Systems Engineer Fluid, Inc | http://www.fluid.com

1 0

Upgrading Heavily Modified RH9 Machines
by Brad Tilley 04 Apr '04

04 Apr '04

Hello, I have several heavily modified RH9 machines (custom kernels, reiser FS, etc.) Just wondering if CentOS could do an upgrade install on machines such as this? I know it's always better to do a clean install, but these machines have been tweaked a lot over the last year and are running perfectly (a lot of time and effort went into this)... an upgrade install would be great. My main concern is the filesystem. Thanks, Brad

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss