Discuss

discuss@lists.centos.org

34753 discussions

Re: [CentOS] GPX files
by J Martin Rushton 31 May '17

31 May '17

Thanks for the suggestions. I'd seen gpsbabel, but simply converting the tracks doesn't appear to display them. Another user suggested a downloadable Google Earth, so I'll try that. Failing all else, I've used shell scripting in my day job for the last 18 years (and before that Digital's DCL for the previous 18 years). I'm just trying to avoid reinventing the wheel. Once again, thanks all for the suggestions. On 31/05/17 13:17, Michael Tiernan wrote: > On 5/30/17 7:02 PM, J Martin Rushton wrote: >> Garmin support viewing this via their >> Garmin Express product, > I know this isn't really appropriate to this mailing list but I'll > perpetuate the conversation just this little bit more. > > You need to look at the likes of gpsbabel (http://www.gpsbabel.org/) > and websites like poi-factory (http://www.poi-factory.com/) to chase > this sort of problem. > > I've found very few openly Linux solutions but I've also gotten to the > point that "viewing" the files is less needed than before. I do a lot of > shell based work. One learns to adapt. :( >

1 0

CentOS 7, X issue
by m.roth＠5-cent.us 31 May '17

31 May '17

One of my users is reporting that he's working (heavy graphics, I believe), and X freezes. So, to save him from rebooting, I did init 3. And waited. Almost a minute and a half later, it had not completed. I quit, killed X, and then could init 3, then init 5. I'm not finding clues as to what hung. In messages, I see ay 31 12:07:14 <workstation name> gnome-session: (tracker-miner-fs:1931): GLib-GObject-WARNING **: g_object_notify: object class 'UpDevice' has no property named 'g-name-owner' May 31 12:08:28 <workstation name> abrt-hook-ccpp: Process 31430 (Xorg) of user 0 killed by SIGABRT - dumping core May 31 12:08:29 <workstation name> gnome-session: (gnome-settings-daemon:1677): Gdk-WARNING **: gnome-settings-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :0. The abrt is, I believe, when I killed X. I can't find anything googling, anyone got any thoughts on this? 7.3.1611. Looking at yum.log, I see the cron job updated glibc, dracut, and systemd a few days after I fully updated and rebooted it. mark

1 0

None
by None 31 May '17

31 May '17

by outgoing.mit.edu (8.13.8/8.12.4) with ESMTP id v4VE3rJQ021943 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES128-SHA bits=128 verify=NOT); Wed, 31 May 2017 10:03:54 -0400 From: Michael Tiernan <mtiernan(a)lns.mit.edu> Reply-To: mtiernan(a)mit.edu To: centos(a)centos.org, martinrushton56(a)btinternet.com References: <5907a762-402c-3661-fbb0-44956b439efa(a)btinternet.com> Organization: MIT - Laboratory for Nuclear Science Message-ID: <bf9793f1-eebb-d31e-e4c3-fd8d9b75aa4c(a)mit.edu> Date: Wed, 31 May 2017 10:03:53 -0400 User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.9; rv:52.0) Gecko/20100101 Thunderbird/52.1.1 MIME-Version: 1.0 In-Reply-To: <5907a762-402c-3661-fbb0-44956b439efa(a)btinternet.com> Content-Type: text/plain; charset=utf-8; format=flowed Content-Language: en-US Content-Transfer-Encoding: 7bit X-Brightmail-Tracker: H4sIAAAAAAAAA+NgFprFKsWRmVeSWpSXmKPExsUixG6noutzVi/SYOtdYYtlZxYwW2ycVuTA 5PF91lMWj5Vtk5kDmKK4bFJSczLLUov07RK4MtYfOMFSsJu9onvWX/YGxga2LkYODgkBE4mj G2W7GLk4hAQWM0nsObudDcLZyCjx7NNsRghnLZPE56k7mLoYOTnYBHQkPk/uZwbpFhaQl2j5 xAMSFhKQkng6ezVYiYiAqcThiZ1sEHFHidnfP7OC2PwCRhKHOl4wg9i8AlYS87oegNWwCKhK tJ+7CxYXFUiVOHNyKVSNoMTJmU9YQGxOASeJx0+PgdUzC5hJzNv8kBnCFpe49WQ+E4QtL7H9 7RzmCYxCs5C0z0LSMgtJyywkLQsYWVYxyqbkVunmJmbmFKcm6xYnJ+blpRbpGunlZpbopaaU bmIEBTunJO8Oxn93vQ4xCnAwKvHwGpTpRgqxJpYVV+YeYpTkYFIS5a2w0YsU4kvKT6nMSCzO iC8qzUktPsQowcGsJMJbcAoox5uSWFmVWpQPk5LmYFES5xXXaIwQEkhPLEnNTk0tSC2Cycpw cChJ8DKdAWoULEpNT61Iy8wpQUgzcXCCDOcBGq4IUsNbXJCYW5yZDpE/xajL0fRhyxcmIZa8 /LxUKaA1p4GKBECKMkrz4OaAk1Q+y8ZXjOJAbwnzngCp4gEmOLhJr4CWMAEt2bVDG2RJSSJC SqqBUbH8xGtttRZHNz9rvsdbBB2WNSX4+5/ea8Y+u3+C2lX+qKthnr/uSbnyZD78IJ/DNX/v SYcQL1Np24Mrz/D1L3l1P2TB80M9vn7q9xgnTlCMLlrK3vbn1W25J7fmHX77ae+u3e/1K/VW RP+LWeG1xGiZ+fmLx48pq7tHRTROSWh5/k4+y/RpvBJLcUaioRZzUXEiAMREXRItAwAA Subject: Re: [CentOS] GPX files X-BeenThere: centos(a)centos.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: CentOS mailing list <centos.centos.org> List-Unsubscribe: <https://lists.centos.org/mailman/options/centos>, <mailto:centos-request@centos.org?subject=unsubscribe> List-Archive: <http://lists.centos.org/pipermail/centos/> List-Post: <mailto:centos@centos.org> List-Help: <mailto:centos-request@centos.org?subject=help> List-Subscribe: <https://lists.centos.org/mailman/listinfo/centos>, <mailto:centos-request@centos.org?subject=subscribe> X-List-Received-Date: Wed, 31 May 2017 14:03:57 -0000 On 5/30/17 7:02 PM, J Martin Rushton wrote: > Garmin support viewing this via their > Garmin Express product, I know this isn't really appropriate to this mailing list but I'll perpetuate the conversation just this little bit more. You need to look at the likes of gpsbabel (http://www.gpsbabel.org/) and websites like poi-factory (http://www.poi-factory.com/) to chase this sort of problem. I've found very few openly Linux solutions but I've also gotten to the point that "viewing" the files is less needed than before. I do a lot of shell based work. One learns to adapt. :( -- << MCT >> Michael C Tiernan xmpp:mtiernan@mit.edu +1 (617) 324-9173 MIT - Laboratory for Nuclear Science - http://www.lns.mit.edu High Perf Research Computing Facility at The Bates Linear Accelerator Please avoid sending me MS-Word or MS-PowerPoint attachments. See http://www.gnu.org/philosophy/no-word-attachments.html

1 0

Re: [CentOS] CentOS 6.9 Skylake soft error
by Mark (Netbook) 31 May '17

31 May '17

Hello, I have an Intel NUC6i5 (Skylake i5-6260u processor) running CentOS 6.9 and there are no real problems. However during boot an error occurs in dmesg where a PCH unknown device 0x9d48 is logged. How can I get rid of this error output? Thank you, Mark

4 7

Mini PCs
by Robert Moskowitz 31 May '17

31 May '17

I have been working, for the past few years, with armv7 SOCs and have a number of servers working. Intel, etal are catching up with ARM and I have seen ones like: https://www.aliexpress.com/item/NEW-Mini-pc-X86-4-Lan-Qotom-Q190G4N-with-ce… I am looking for a low power (this is 10W) x86_64 board that has at least 2 core and 2GB memory. A single LAN port, a few USB and sata (not mSata) that supports a 1TB drive (2.5", 5V is just fine). Oh, and for ~$100 :) Case is not necessary, as I can put it in my rack like these: http://medon.htt-consult.com/~rgm/cubieboard/cubietower-3.JPG (goal is to replace that SFF to the left). It looks like Qotom might have one. It is a bit challenging to figure out which units have what. thanks for any pointers.

6 14

IPv6 addresses order (CentOS6)
by Walter H. 31 May '17

31 May '17

Hello, in /etc/sysconfig/network-scripts/ifcfg-eth0 I have this <ifcfg-eth0> ... IPV6INIT=yes IPV6ADDR=prefix::5 IPV6ADDR_SECONDARIES="prefix::2 prefix::3 prefix::4" IPV6_AUTOCONF=no IPV6_DEFAULTGW=prefix::1 IPV6_DEFAULTDEV=eth0 </ifcfg-eth0> when I enter ifconfig the IPv6 addresses are in a different order <ifconfig> eth0 Link encap:Ethernet HWaddr ... inet addr:... Bcast:... Mask:... inet6 addr: fe80::.../64 Scope:Link inet6 addr: prefix::4/64 Scope:Global inet6 addr: prefix::3/64 Scope:Global inet6 addr: prefix::5/64 Scope:Global inet6 addr: prefix::2/64 Scope:Global </ifconfig> is there a way to influence the order? or how can I tell e.g. ssh to use a specific IPv6 address? (as it seems ssh uses the first one listed in ifconfig and not the one defined with IPV6ADDR) Thanks, Walter

3 3

Fix for the CVE-2017-7494?
by Bernard Fay 31 May '17

31 May '17

Hi, Does a fix has already been made in the CenOS RPM repositories for this Samba remote execution code vulnerability, CVE-2017-7494? Thx, Bernard

5 5

{centos 6} errors in libvirtd, all sites down, need advice
by Political Gateway 29 May '17

29 May '17

Today out of the blue...boom all sites down. I use a bridge and virtual machines, 5 websites. virsh shows me all machines are up and running, everything looks okay, but cannot get to sites. Here are the errors listed in the log, condensed due to multiples of same errors. there is some kid or error reading data, then there is some kind of network collision (bobnet, no idea what that is) then it talks of cpus and out of room for data, but tons of room left... any ideas i would be greatful thanks 02:07:15.951: 28676: error : virNetSocketReadWire:911 : End of file while reading data: Input/output error 17:34:33.924: 2447: error : networkCheckRouteCollision:1673 : internal error Network is already in use by interface vbr0 18:03:54.050: 2413: info : libvirt version: 0.9.4, package: 23.el6_2.4 (CentOS BuildSystem <http://bugs.centos.org>, 2012-01-17-10:52:29, c6b18n1.dev.centos.org) 18:03:54.050: 2413: error : virInterfaceDefParseXML:793 : XML error: bond interface misses the bond element 18:22:30.393: 2457: error : ifaceGetIndex:334 : internal error interface vnet0 does not exist 18:22:30.607: 2457: error : qemuAutostartDomain:165 : Failed to autostart VM 'mywebsite': internal error interface vnet0 does not exist 18:25:05.942: 3054: error : ifaceGetIndex:334 : internal error interface vnet0 does not exist 18:27:31.022: 3046: error : virNetworkObjIsDuplicate:1742 : operation failed: network 'bobnet' already exists with uuid 85e167f9-4670-4f7c-68c7-caf2daeecc93 18:31:57.184: 3048: error : ifaceGetIndex:334 : internal error interface vnet0 does not exist 19:15:24.599: 3043: error : qemuMonitorIO:583 : internal error End of file from monitor 00:54:12.418: 7632: warning : qemuDomainObjStart:4649 : Ignoring incomplete managed state /var/lib/libvirt/qemu/save/mywebsite.save 11:51:27.639: 2157: error : qemuDomainSaveImageOpen:3914 : operation failed: failed to read qemu header 2014-03-24 19:03:00.182+0000: 2047: error : qemuDomainSetVcpusFlags:4245 : invalid argument: requested vcpus is greater than max allowable vcpus for the domain: 3 > 2 2016-09-07 15:56:13.228+0000: 24704: error : virFileRewrite:507 : cannot write data to file '/var/run/libvirt/qemu/main.mywebsite.com.xml.new': No space left on device

2 1

test builds on private server updates (drivers, mesa, kernel)
by Andreas Benzler 29 May '17

29 May '17

Hello Guys, while im testing a AMD Radeon RX 480 i was up on my centos 7. To get the card realy work, I upgrade my repros: Drivers: [cms4all-drivers] name=cms4all-drivers baseurl=http://centos.cms4all.org/repo/7/drivers/ gpgcheck=0 enabled=1 libdrm -> 2.4.81 libav -> 1.8.2 libav-utils -> 1.8.2 xorg-x11-drv-intel-2.99.917-21.20170418 xorg-x11-drv-nouveau-1.0.15-1 xorg-x11-drv-ati-7.9.0 xorg-x11-drv-amdgpu-1.3.0 ATI and AMDGPU works here, intel stays out here for test. Mesa: [cms4all-mesa] name=cms4all-mesa baseurl=http://centos.cms4all.org/repo/7/mesa/ #baseurl=file:///srv/repo/centos/7/mesa gpgcheck=0 enabled=1 Mesa3D, needs drivers because of libdrm 2.4.81 Mesa 17.1.1 Add downgrade patch zlib 2.8 -> 2.7 Add mesa-vaapi as separate package, still problmes with video out on centos, remove gstreamer1-vaapi to get my videos working. No problem on other distro (not Fedora). There is a hughe difference gstreamer 1.8 Gnome 3.24. Kernel: [cms4all-kernel] name=cms4all-kernel baseurl=http://centos.cms4all.org/repo/7/kernel/ gpgcheck=0 enabled=1 kernel 4.11.3 Same as elrpo, but add functions to amdgpu and radeon. Sincerely Andy PS: Still unsigned private builds, take the source if your unshure.

1 2

Low random entropy
by Robert Moskowitz 29 May '17

29 May '17

I am use to low random entropy on my arm boards, not an intel. On my Lenovo x120e, cat /proc/sys/kernel/random/entropy_avail reports 3190 bits of entropy. On my armv7 with Centos7 I would get 130 unless I installed rng-tools and then I get ~1300. SSH into one and it drops back to 30! for a few minutes. Sigh. Anyway on my new Zotac nano ad12 with an AMD E-1800 duo core, I am seeing 180. I installed rng-tools and no change. Does anyone here know how to improve the random entropy? thanks

6 17

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss