Discuss

discuss@lists.centos.org

3 participants
34748 discussions

Network configuration issue with second public ip on CentOS 6
by Meikel 24 Dec '15

24 Dec '15

Hi folks, I have a server at Soyoustart.com (which is a brand of OVH). I run CentOS 6.7 and have problems with network configuration. I want to add a second public ip (failover ip) to the server and did follow the instructions in the CentOS-section of http://hilfe.ovh.de/AdministrationIpAliasHinzufuegen After executing the required steps I'm not able to reach the host via the second ip from an external host. I tried it with ping and with ssh commands. Here the content of the config files (I anonymized the server ip with xx.xx.xx.xx and the failover ip with yy.yy.yy.yy): $ cat /etc/sysconfig/network NETWORKING=yes HOSTNAME=<name-of-my-host> NOZEROCONF=true GATEWAY=xx.xx.xx.254 $ cat /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 BOOTPROTO=static IPADDR=xx.xx.xx.xx NETMASK=255.255.255.0 ONBOOT=yes GATEWAY=xx.xx.xx.254 $ cat /etc/sysconfig/network-scripts/ifcfg-eth0:0 DEVICE=eth0:0 BOOTPROTO=static IPADDR=yy.yy.yy.yy NETMASK=255.255.255.255 ONBOOT=yes When I restart the network I get a message (two times) saying "RTNETLINK answers: Operation not supported". $ service network restart Schnittstelle eth0 beenden: [ OK ] Loopback-Schnittstelle beenden: [ OK ] Loopback-Schnittstelle hochfahren: [ OK ] Schnittstelle eth0 hochfahren: Determining if ip address xx.xx.xx.xx is already in use for device eth0... RTNETLINK answers: Operation not supported RTNETLINK answers: Operation not supported [ OK ] I can see two interfaces eth0 and eth0:0 $ LANG="" ifconfig eth0 Link encap:Ethernet HWaddr ..:..:..:..:..:.. inet addr:xx.xx.xx.xx Bcast:xx.xx.xx.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11122 errors:0 dropped:0 overruns:0 frame:0 TX packets:14371 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1362900 (1.2 MiB) TX bytes:3462327 (3.3 MiB) Interrupt:20 Memory:fe500000-fe520000 eth0:0 Link encap:Ethernet HWaddr ..:..:..:..:..:.. inet addr:yy.yy.yy.yy Bcast:yy.yy.yy.yy Mask:255.255.255.255 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:20 Memory:fe500000-fe520000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:3096 errors:0 dropped:0 overruns:0 frame:0 TX packets:3096 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:274948 (268.5 KiB) TX bytes:274948 (268.5 KiB) I'm able to reach the host from another host (outside OVH network) via xx.xx.xx.xx (I use ping and ssh), but not via yy.yy.yy.yy. Just to be sure that there isn't an issue with the firewall I did "service iptables stop" and ran the "ping" and "ssh" commands again with the same result. For ip xx.xx.xx.xx it works, but not for yy.yy.yy.yy. Not sure if this is important, just in case it matters, some additional information: IPv6 is disabled by kernel parameter "ipv6.disable=1" in /etc/grub.conf The two mac addresses I see for eth0 and eth0:0 with the "ifconfig" command are the same. In the OVH/Soyoustart.com GUI I created a virtual mac for the failover ip, I'm not sure if that virtual mac should come into play somewhere? $ uname -a Linux <name-of-my-host> 2.6.32-573.12.1.el6.x86_64 #1 SMP Tue Dec 15 21:19:08 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux $ LANG="" route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface xx.xx.xx.0 * 255.255.255.0 U 0 0 0 eth0 default vss-gw-6k.fr.eu 0.0.0.0 UG 0 0 0 eth0 Why is yy.yy.yy.yy not reachable from outside? What am I doing wrong or what can I do to narrow down the problem? Regards, Meikel

7 7

C7 apache file access
by Robert Moskowitz 24 Dec '15

24 Dec '15

Pulling out what little hair I have here, but stumbled onto a possible problem. I have a server running C6 apache that is set up with personal directories and no problem showing the files. You can see it at: medon.htt-consult.com/~rgm/pogo So I have a C7 apache server I am building. Files I create on the new server are listing fine. Files I have copied (with cp -avr ...) get permission error e.g.: [Wed Dec 23 12:32:49.359323 2015] [negotiation:error] [pid 3208] (13)Permission denied: [client 192.168.160.20:38708] AH00686: cannot read directory for multi: /home/rgm/public_html/biby/ File permissions are the same. So in frustation I try using stat and it shows a different picture: $ stat test/testit File: ‘test/testit’ Size: 6 Blocks: 8 IO Block: 4096 regular file Device: 803h/2051d Inode: 524296 Links: 1 Access: (0664/-rw-rw-r--) Uid: ( 1000/ rgm) Gid: ( 1000/ rgm) Context: unconfined_u:object_r:httpd_user_content_t:s0 Access: 2015-12-23 13:53:04.212993088 -0500 Modify: 2015-12-23 13:53:06.313000584 -0500 Change: 2015-12-23 13:53:06.313000584 -0500 Birth: - $ stat biby/MishnahBerurah-2015-12-18.amr File: ‘biby/MishnahBerurah-2015-12-18.amr’ Size: 2290374 Blocks: 4480 IO Block: 4096 regular file Device: 803h/2051d Inode: 136295 Links: 1 Access: (0664/-rw-rw-r--) Uid: ( 1000/ rgm) Gid: ( 1000/ rgm) Context: system_u:object_r:unlabeled_t:s0 Access: 2015-12-18 06:54:01.000000000 -0500 Modify: 2015-12-18 06:54:01.000000000 -0500 Change: 2015-12-23 13:56:57.273824913 -0500 Birth: - Notice the difference with Context. Wiaht is this httpd_user_content_t? Why on files I create on this system and not those I cp from a USB drive? And is this the problem or something else? thanks

4 6

Starting stunnel on boot with CentOS7
by Leroy Tennison 24 Dec '15

24 Dec '15

The stunnel package doesn't come with an init script and systemctl doesn't list it as a service I recognize, I guess I could put it in /etc/rd.d/rc.local or create a script in /etc/rc.d/init.d but thought I'd ask before creating my own solution. Confidentiality Notice | This email and any included attachments may be privileged, confidential and/or otherwise protected from disclosure. Access to this email by anyone other than the intended recipient is unauthorized. If you believe you have received this email in error, please contact the sender immediately and delete all copies. If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.

4 6

Solved - Re: C7 apache file access
by Robert Moskowitz 23 Dec '15

23 Dec '15

On 12/23/2015 04:36 PM, Александр Кириллов wrote: > Robert Moskowitz писал 2015-12-23 23:56: >> On 12/23/2015 03:26 PM, John R Pierce wrote: >>> On 12/23/2015 12:05 PM, Robert Moskowitz wrote: >>>>> If SELinux is working, then do >>>>> >>>>> setsebool -P httpd_enable_homedirs on >>>> >>>> Did not help. >>>> >>>> in messages I see: >>>> >>>> Dec 23 14:54:04 medon dbus-daemon: dbus[444]: avc: received >>>> policyload notice (seqno=3) >>>> Dec 23 14:54:04 medon dbus[444]: avc: received policyload notice >>>> (seqno=3) >>>> Dec 23 14:54:04 medon dbus-daemon: dbus[444]: [system] Reloaded >>>> configuration >>>> Dec 23 14:54:04 medon dbus[444]: [system] Reloaded configuration >>>> Dec 23 14:54:11 medon setsebool: The httpd_enable_homedirs policy >>>> boolean was changed to on by root >>>> >>>> BUt still get the access error: >>>> >>>> [Wed Dec 23 14:55:26.579402 2015] [negotiation:error] [pid 3212] >>>> (13)Permission denied: [client 192.168.160.20:38836] AH00686: >>>> cannot read directory for multi: /home/rgm/public_html/biby/ >>>> >>>> i should say that this system is build with the Centos7-arm build >>>> that we are testing out. So this could be a problem with the >>>> selinux build for armv7. But I thought this was a general >>>> C7/apache issue... >>> >>> did you verify it /is/ selinux by running with `setenforce >>> permissive` ? >> >> Thank you for that reminder. I did that and the directory was >> displayed. >> >> switch back to enforcing and get the permissions error. >> >> So what do I try next. My current server is also an ARMv7 that is >> running the Centos6 port of Redsleeve6. This port does not support >> selinux which is one of the many reasons I want to move all my ARMv7 >> servers over to C7-arm as soon as I can. Thus I suspect I am going to >> be learning (relearning in some cases) a lot about selinux... > > Have you tried restorecon -Rv /home ? > > No, as I did not know this command existed and what it might be used for. I can now access the files. Thanks

1 0

Recovering LVM after crash
by Emmanuel Noobadmin 23 Dec '15

23 Dec '15

I've been trying to cover data from a disk that appeared to had been corrupted after a power outage. The original setup was lvm on md raid 1 which appears to be what is complicating the issue. Apart from /boot, everything was on LVM partitions so I don't have any backup lvm information. Following various guides online, I've recreated duplicated the raid partition with dd onto a new disk, recreated the raid 1 array with missing device, but the pv cannot be found. I've tried to find the lvm uuid using this guide https://www.howtoforge.com/recover_data_from_raid_lvm_partitions but despite dumping twice the data to file, there are no plain text configuration information. The drives are not encrypted so that isn't likely to be the problem. I also used testdisk to try to recover the partitions but it says they cannot be recovered. During analysis, it was able to detect the lvm partitions, extracted output: Linux LVM 1069 146 38 60799 228 29 959567608 Linux 1069 179 7 57740 22 10 910409728 Linux 790 66 45 59780 237 33 947685112 Linux 1069 179 7 57740 22 10 910409728 Linux 29283 103 5 85953 201 8 910409728 Linux 29292 181 10 85963 24 13 910409728 The numbers are start CHS, end CHS and size in sectors. There seems to be way more possible partitions than there should be, possibly results of previous LV resizing. With only such data left, is there any possible way to reconstruct the PV/VG/LV without the uuid and recover data?

1 0

Re: [CentOS] Calibre installation fails on C7
by James B. Byrne 23 Dec '15

23 Dec '15

On Wed, December 23, 2015 00:33, John R Pierce wrote: > > prefixing this with, I have no idea what Calibre is... > Calibre is an open source e-reader that handles mobi files along with many other e-reader formats. See: http://calibre-ebook.com/ The last version supported on CentOS6 is v1.48. The latest version is v2.47.0. On Tue, December 22, 2015 22:06, Fred Smith wrote: > Attempting to install latest Calibre on Centos-7, getting: . . . > File "/usr/lib64/python2.7/httplib.py", line 1182, in __init__ > context.load_cert_chain(cert_file, key_file) > ssl.SSLError: [SSL] PEM lib (_ssl.c:2757) > > > Can anybody advise me what this tells me? (other than SOMETHING wrong > with some certificate...) The error you are reporting may be due to some misconfiguration of the certificate chain in the Python libraries. Likely the case if you recently updated to 7.2 as others have reported the same thing. You can try to perform a manual download and install, thus bypassing the whole SSL mess, and see if that works. Quoting from the Calibre website: http://calibre-ebook.com/download_linux Manual binary install or reverting to a previous version If you wish to revert to an earlier calibre release or download a calibre upgrade manually, download the tarball of that release from here (choose the 32-bit or 64-bit version, as appropriate). Assuming you want calibre in /opt/calibre, run the following command, changing the path to calibre-tarball.txz below as appropriate: sudo mkdir -p /opt/calibre && sudo rm -rf /opt/calibre/* && sudo tar xvf /path/to/downloaded/calibre-tarball.txz -C /opt/calibre && sudo /opt/calibre/calibre_postinstall HTH. -- *** e-Mail is NOT a SECURE channel *** Do NOT transmit sensitive data via e-Mail James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

3 2

Centos-7.2 LiveKDE does not work properly
by Timothy Murphy 23 Dec '15

23 Dec '15

CentOS-7-x86_64-LiveKDE-1511.iso installed on a USB stick does not work properly - it takes over 6 minutes to boot. Who can I report this to? -- Timothy Murphy gayleard /at/ eircom.net School of Mathematics, Trinity College, Dublin

2 1

CentOS-announce Digest, Vol 130, Issue 11
by centos-announce-request＠centos.org 23 Dec '15

23 Dec '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. Announcing release for Apache HTTP Server 2.4 on CentOS Linux 6 x86_64 SCL (Honza Horak) 2. Announcing release for Apache HTTP Server 2.4 on CentOS Linux 7 x86_64 SCL (Honza Horak) 3. Announcing release for Varnish Cache 4 on CentOS Linux 7 x86_64 SCL (Honza Horak) 4. Announcing release for Varnish Cache 4 on CentOS Linux 6 x86_64 SCL (Honza Horak) 5. Announcing release for Phusion Passenger 4.0 on CentOS Linux 7 x86_64 SCL (Honza Horak) 6. Announcing release for Phusion Passenger 4.0 on CentOS Linux 6 x86_64 SCL (Honza Horak) 7. Announcing release for nginx 1.6 and 1.8 on CentOS Linux 6 x86_64 SCL (Honza Horak) 8. Announcing release for nginx 1.6 and 1.8 on CentOS Linux 7 x86_64 SCL (Honza Horak) 9. Announcing release for PHP 5.4, 5.5 and 5.6 on CentOS Linux 6 x86_64 SCL (Honza Horak) 10. Announcing release for PHP 5.4, 5.5 and 5.6 on CentOS Linux 7 x86_64 SCL (Honza Horak) 11. Announcing release for Perl 5.16 and 5.20 on CentOS Linux 7 x86_64 SCL (Honza Horak) 12. Announcing release for Perl 5.16 and 5.20 on CentOS Linux 6 x86_64 SCL (Honza Horak) 13. CESA-2015:2694 Important CentOS 6 qemu-kvm Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 22 Dec 2015 12:52:23 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for Apache HTTP Server 2.4 on CentOS Linux 6 x86_64 SCL Message-ID: <56793977.1060101(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of version 2.4 of the Apache HTTP Server on CentOS Linux 6 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: $ sudo yum install centos-release-scl $ sudo yum install httpd24-httpd $ scl enable httpd24 bash At this point you should be able to use httpd just as a normal application. An examples of commands run might be: $ service httpd24-httpd start $ httpd -h In order to view the individual components included in this collection, including additional subpackages, you can run: $ sudo yum list httpd24\* About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collection httpd24 delivers version 2.4 of the Apache HTTP server (with a daemon called httpd24-httpd) and related server modules, like mode_ldap, mod_ssl, mod_auth_kerb and others. For more on the Apatch HTTP, see https://httpd.apache.org. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the Apache HTTP Server collection being released here, we also build and deliver other databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, NodeJS, Ruby, Python and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every second Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ Message: 2 Date: Tue, 22 Dec 2015 12:52:33 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for Apache HTTP Server 2.4 on CentOS Linux 7 x86_64 SCL Message-ID: <56793981.9010605(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of version 2.4 of the Apache HTTP Server on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: $ sudo yum install centos-release-scl $ sudo yum install httpd24-httpd $ scl enable httpd24 bash At this point you should be able to use httpd just as a normal application. An examples of commands run might be: $ service httpd24-httpd start $ httpd -h In order to view the individual components included in this collection, including additional subpackages, you can run: $ sudo yum list httpd24\* About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collection httpd24 delivers version 2.4 of the Apache HTTP server (with a daemon called httpd24-httpd) and related server modules, like mode_ldap, mod_ssl, mod_auth_kerb and others. For more on the Apatch HTTP, see https://httpd.apache.org. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the Apache HTTP Server collection being released here, we also build and deliver other databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, NodeJS, Ruby, Python and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every second Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ Message: 3 Date: Tue, 22 Dec 2015 12:52:57 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for Varnish Cache 4 on CentOS Linux 7 x86_64 SCL Message-ID: <56793999.4020400(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of version 4 of the Varnish Cache Server on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: $ sudo yum install centos-release-scl $ sudo yum install rh-varnish4 $ scl enable rh-varnish4 bash At this point you should be able to use varnish just as a normal application. An example of commands run might be: $ systemctl start rh-varnish4-varnish $ varnishtop In order to view the individual components included in this collection, including additional subpackages, you can run: $ sudo yum list rh-varnish4\* About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collection rh-varnish4 delivers version 4 of the Varnish Cache, a high-performance HTTP reverse proxy. The daemon is called rh-varnish4-varnish. For more on the Varnish HTTP, see https://www.varnish-cache.org. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the Varnish Cache collection being released here, we also build and deliver other databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, NodeJS, Ruby, Python and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every second Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ Message: 4 Date: Tue, 22 Dec 2015 12:53:08 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for Varnish Cache 4 on CentOS Linux 6 x86_64 SCL Message-ID: <567939A4.7090700(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of version 4 of the Varnish Cache Server on CentOS Linux 6 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: $ sudo yum install centos-release-scl $ sudo yum install rh-varnish4 $ scl enable rh-varnish4 bash At this point you should be able to use varnish just as a normal application. An example of commands run might be: $ service rh-varnish4-varnish start $ varnishtop In order to view the individual components included in this collection, including additional subpackages, you can run: $ sudo yum list rh-varnish4\* About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collection rh-varnish4 delivers version 4 of the Varnish Cache, a high-performance HTTP reverse proxy. The daemon is called rh-varnish4-varnish. For more on the Varnish HTTP, see https://www.varnish-cache.org. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the Varnish Cache collection being released here, we also build and deliver other databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, NodeJS, Ruby, Python and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every second Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ Message: 5 Date: Tue, 22 Dec 2015 13:04:53 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for Phusion Passenger 4.0 on CentOS Linux 7 x86_64 SCL Message-ID: <56793C65.4040300(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of Phusion Passenger in version 4.0 on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: $ sudo yum install centos-release-scl $ sudo yum install rh-passenger40 rh-passenger40-ruby22 nginx16 $ scl enable rh-passenger40 rh-ruby22 bash At this point you should be able to use passenger just as a normal application. An examples of commands run might be: $ passenger start $ passenger status In order to view the individual components included in this collection, including other packages that allow you to use passenger with Ruby 2.0 or 1.9.3, instead of 2.2 as in example above, you can run: $ sudo yum list rh-passenger40\* The rh-passenger40 collection relies either on the rh-ruby22, ruby200 or ruby193 collection and the nginx16 collection, so you need to install one of the following packages: rh-passenger40-ruby193, rh-passenger40-ruby200, or rh-passenger40-ruby22. About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collection rh-passenger40 delivers Phusion Passenger, a web and application server designed to be fast, robust and lightweight. The rh-passenger40 Software Collection can also be used with Apache HTTP Server from the httpd24 Software Collection. To do so, install the rh-passenger40-mod_passenger package. For more on the Phusion Passenger, see https://www.phusionpassenger.com. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the Phusion Passenger collections being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, NodeJS, Ruby, Python and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ Message: 6 Date: Tue, 22 Dec 2015 13:05:16 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for Phusion Passenger 4.0 on CentOS Linux 6 x86_64 SCL Message-ID: <56793C7C.6090303(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of Phusion Passenger in version 4.0 on CentOS Linux 6 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: $ sudo yum install centos-release-scl $ sudo yum install rh-passenger40 rh-passenger40-ruby22 nginx16 $ scl enable rh-passenger40 rh-ruby22 bash At this point you should be able to use passenger just as a normal application. An examples of commands run might be: $ passenger start $ passenger status In order to view the individual components included in this collection, including other packages that allow you to use passenger with Ruby 2.0 or 1.9.3, instead of 2.2 as in example above, you can run: $ sudo yum list rh-passenger40\* The rh-passenger40 collection relies either on the rh-ruby22, ruby200 or ruby193 collection and the nginx16 collection, so you need to install one of the following packages: rh-passenger40-ruby193, rh-passenger40-ruby200, or rh-passenger40-ruby22. About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collection rh-passenger40 delivers Phusion Passenger, a web and application server designed to be fast, robust and lightweight. The rh-passenger40 Software Collection can also be used with Apache HTTP Server from the httpd24 Software Collection. To do so, install the rh-passenger40-mod_passenger package. For more on the Phusion Passenger, see https://www.phusionpassenger.com. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the Phusion Passenger collections being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, NodeJS, Ruby, Python and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ Message: 7 Date: Tue, 22 Dec 2015 13:07:08 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for nginx 1.6 and 1.8 on CentOS Linux 6 x86_64 SCL Message-ID: <56793CEC.1010004(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of versions 1.6 and 1.8 of the nginx HTTP and reverse proxy server on CentOS Linux 6 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: $ sudo yum install centos-release-scl $ sudo yum install rh-nginx18 $ scl enable rh-nginx18 bash At this point you should be able to use nginx just as a normal application. An example of commands run might be: $ nginx -v $ service rh-nginx18-nginx start In order to view the individual components included in this collection, including additional subpackages, you can run: $ sudo yum list rh-nginx18\* About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collection nginx16 and rh-nginx18 deliver versions 1.6 and 1.8 of the nginx, an HTTP and reverse proxy server with a focus on high concurrency, performance and low memory usage. The collection nginx16 delivers a daemon called nginx16-nginx and the collection rh-nginx18 delivers a daemon called rh-nginx18-nginx. For more on the nginx, see http://nginx.org. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the nginx collections being released here, we also build and deliver other databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, NodeJS, Ruby, Python and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every second Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ Message: 8 Date: Tue, 22 Dec 2015 13:07:37 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for nginx 1.6 and 1.8 on CentOS Linux 7 x86_64 SCL Message-ID: <56793D09.8090207(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of versions 1.6 and 1.8 of the nginx HTTP and reverse proxy server on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: $ sudo yum install centos-release-scl $ sudo yum install rh-nginx18 $ scl enable rh-nginx18 bash At this point you should be able to use nginx just as a normal application. An example of commands run might be: $ nginx -v $ systemctl start rh-nginx18-nginx In order to view the individual components included in this collection, including additional subpackages, you can run: $ sudo yum list rh-nginx18\* About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collection nginx16 and rh-nginx18 deliver versions 1.6 and 1.8 of the nginx, an HTTP and reverse proxy server with a focus on high concurrency, performance and low memory usage. The collection nginx16 delivers a daemon called nginx16-nginx and the collection rh-nginx18 delivers a daemon called rh-nginx18-nginx. For more on the nginx, see http://nginx.org. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the nginx collections being released here, we also build and deliver other databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, NodeJS, Ruby, Python and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every second Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ Message: 9 Date: Tue, 22 Dec 2015 13:11:59 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for PHP 5.4, 5.5 and 5.6 on CentOS Linux 6 x86_64 SCL Message-ID: <56793E0F.3040804(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of versions 5.4, 5.5 and 5.6 of the PHP on CentOS Linux 6 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps (example of PHP 5.6): $ sudo yum install centos-release-scl $ sudo yum install rh-php56 $ scl enable rh-php56 bash At this point you should be able to use php just as a normal application. Examples of commands run might be: $ php my-app.php $ sudo yum install rh-php56-php-devel yum install libxml2-devel $ sudo pear install Cache_Lite $ sudo pecl install xmldiff In order to view the individual components included in this collection, including additional PHP modules, you can run: $ sudo yum list rh-php56\* About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collections php54, php55 and rh-php56 deliver versions 5.4, 5.5 and 5.6 of the PHP interpreter, pecl and perl installers and some other modules that are also included in the collections as RPMs. For more on the PHP, see http://www.php.net. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the PHP collections being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, NodeJS, Ruby, Python and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every second Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ Message: 10 Date: Tue, 22 Dec 2015 13:12:08 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for PHP 5.4, 5.5 and 5.6 on CentOS Linux 7 x86_64 SCL Message-ID: <56793E18.1050602(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of versions 5.4, 5.5 and 5.6 of the PHP on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps (example of PHP 5.6): $ sudo yum install centos-release-scl $ sudo yum install rh-php56 $ scl enable rh-php56 bash At this point you should be able to use php just as a normal application. Examples of commands run might be: $ php my-app.php $ sudo yum install rh-php56-php-devel yum install libxml2-devel $ sudo pear install Cache_Lite $ sudo pecl install xmldiff In order to view the individual components included in this collection, including additional PHP modules, you can run: $ sudo yum list rh-php56\* About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collections php54, php55 and rh-php56 deliver versions 5.4, 5.5 and 5.6 of the PHP interpreter, pecl and perl installers and some other modules that are also included in the collections as RPMs. For more on the PHP, see http://www.php.net. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the PHP collections being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, NodeJS, Ruby, Python and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every second Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ Message: 11 Date: Tue, 22 Dec 2015 13:12:25 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for Perl 5.16 and 5.20 on CentOS Linux 7 x86_64 SCL Message-ID: <56793E29.9040905(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of versions 5.16 and 5.20 of the Perl language stack on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps (example of Perl 5.20): $ sudo yum install centos-release-scl $ sudo yum install rh-perl520 $ scl enable rh-perl520 bash At this point you should be able to use perl just as a normal application. Examples of commands run might be: $ perl my-app.pl $ sudo yum install rh-perl520-perl-CPAN make $ sudo cpan App::cpanminus $ sudo cpanm -n Furl In order to view the individual components included in this collection, including additional Perl modules, you can run: $ sudo yum list rh-perl520\* About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collections perl516 and rh-perl520 deliver versions 5.16 and 5.20 of the Perl language stack, cpan installer and some other modules that are also included in the collections as RPMs. For more on the Perl, see https://www.perl.org. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the Perl collections being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, NodeJS, Ruby, Python, PHP and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every second Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ Message: 12 Date: Tue, 22 Dec 2015 13:12:36 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for Perl 5.16 and 5.20 on CentOS Linux 6 x86_64 SCL Message-ID: <56793E34.9090203(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of versions 5.16 and 5.20 of the Perl language stack on CentOS Linux 6 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps (example of Perl 5.20): $ sudo yum install centos-release-scl $ sudo yum install rh-perl520 $ scl enable rh-perl520 bash At this point you should be able to use perl just as a normal application. Examples of commands run might be: $ perl my-app.pl $ sudo yum install rh-perl520-perl-CPAN make $ sudo cpan App::cpanminus $ sudo cpanm -n Furl In order to view the individual components included in this collection, including additional Perl modules, you can run: $ sudo yum list rh-perl520\* About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collections perl516 and rh-perl520 deliver versions 5.16 and 5.20 of the Perl language stack, cpan installer and some other modules that are also included in the collections as RPMs. For more on the Perl, see https://www.perl.org. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the Perl collections being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, NodeJS, Ruby, Python, PHP and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every second Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ Message: 13 Date: Tue, 22 Dec 2015 17:18:03 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:2694 Important CentOS 6 qemu-kvm Security Update Message-ID: <20151222171803.GA15495(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:2694 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-2694.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: b696390d8917ac773ee6aec7aea75dc0b45e05987ef9d75af804fc55ee4c1beb qemu-guest-agent-0.12.1.2-2.479.el6_7.3.i686.rpm x86_64: 84f0bb42e2a41afb55ef562f922c1cf3930c2e6693c461f3f0e437b37616e2dc qemu-guest-agent-0.12.1.2-2.479.el6_7.3.x86_64.rpm 5fec2687a04c15616dee3d8bc3461783e3e32ec9e665a103242a14d9cfc1ca0a qemu-img-0.12.1.2-2.479.el6_7.3.x86_64.rpm 2d8f0b102815b4d4d3b33daa489d31879bea053d1f391ef280b5aaedb1198b34 qemu-kvm-0.12.1.2-2.479.el6_7.3.x86_64.rpm 26d6611cbece4dc9fb708a57c4051129059b407704b6367ec2744be3883d3d26 qemu-kvm-tools-0.12.1.2-2.479.el6_7.3.x86_64.rpm Source: d66c3e7a3148aac6f2c8925c8e48829429bd1cc856ece2ca8d30626145028f83 qemu-kvm-0.12.1.2-2.479.el6_7.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net Twitter: @JohnnyCentOS ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 130, Issue 11 ************************************************

1 0

Centos7 Raspberry Pi 2 Login
by david 22 Dec '15

22 Dec '15

Folks I'm not sure this is the right mailing list for the Centos7 port to Raspberry Pi. On the chance that this is the right place... I just booted the Centos Linux 7 for Raspbery Pi 2, but have no idea what the built-in accounts or passwords are. I've tried user: pi password: raspberry and user: root password: password to no avail. Does anyone know? Is there a HOW-TO file with helpful information? Thanks David

4 5

CentOS-announce Digest, Vol 130, Issue 10
by centos-announce-request＠centos.org 22 Dec '15

22 Dec '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit https://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. Announcing release for NodeJS 0.10 on CentOS Linux 7 x86_64 SCL (Honza Horak) 2. Announcing release for NodeJS 0.10 on CentOS Linux 6 x86_64 SCL (Honza Horak) 3. Announcing release for PostgreSQL 9.2 and 9.4 on CentOS Linux 6 x86_64 SCL (Honza Horak) 4. Announcing release for PostgreSQL 9.2 and 9.4 on CentOS Linux 7 x86_64 SCL (Honza Horak) 5. Announcing release for MongoDB 2.4 and 2.6 on CentOS Linux 6 x86_64 SCL (Honza Horak) 6. Announcing release for MongoDB 2.4 and 2.6 on CentOS Linux 7 x86_64 SCL (Honza Horak) 7. Announcing release for MySQL 5.5 and 5.6 on CentOS Linux 7 x86_64 SCL (Honza Horak) 8. Announcing release for MySQL 5.5 and 5.6 on CentOS Linux 6 x86_64 SCL (Honza Horak) 9. Announcing release for MariaDB 5.5 and 10.0 on CentOS Linux 6 x86_64 SCL (Honza Horak) 10. Announcing release for MariaDB 5.5 and 10.0 on CentOS Linux 7 x86_64 SCL (Honza Horak) ---------------------------------------------------------------------- Message: 1 Date: Mon, 21 Dec 2015 17:02:37 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for NodeJS 0.10 on CentOS Linux 7 x86_64 SCL Message-ID: <5678229D.8010608(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of version 0.10 of the NodeJS on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: $ sudo yum install centos-release-scl $ sudo yum install nodejs010 $ scl enable nodejs010 bash At this point you should be able to use NodeJS just as a normal application. An examples of commands run might be: $ node my-app.js $ npm install uglify-js --global $ uglifyjs my-app.js -o my-app.min.js In order to view the individual components included in this collection, including additional NodeJS modules, you can run: $ sudo yum list nodejs010\* About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collection nodejs010 delivers version 0.10 of the NodeJS Javascript interpreter, npm installer and some other modules that are also included in the collections as RPMs. For more on the NodeJS, see https://nodejs.org. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the NodeJS collection being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, Ruby, Python and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every second Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ Message: 2 Date: Mon, 21 Dec 2015 17:03:11 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for NodeJS 0.10 on CentOS Linux 6 x86_64 SCL Message-ID: <567822BF.2070706(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of version 0.10 of the NodeJS on CentOS Linux 6 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps: $ sudo yum install centos-release-scl $ sudo yum install nodejs010 $ scl enable nodejs010 bash At this point you should be able to use NodeJS just as a normal application. An examples of commands run might be: $ node my-app.js $ npm install uglify-js --global $ uglifyjs my-app.js -o my-app.min.js In order to view the individual components included in this collection, including additional NodeJS modules, you can run: $ sudo yum list nodejs010\* About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collection nodejs010 delivers version 0.10 of the NodeJS Javascript interpreter, npm installer and some other modules that are also included in the collections as RPMs. For more on the NodeJS, see https://nodejs.org. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the NodeJS collection being released here, we also build and deliver databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, Ruby, Python and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every second Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ Message: 3 Date: Mon, 21 Dec 2015 17:05:28 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for PostgreSQL 9.2 and 9.4 on CentOS Linux 6 x86_64 SCL Message-ID: <56782348.3060907(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of versions 9.2 and 9.4 of the PostgreSQL server on CentOS Linux 6 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps (example of PostgreSQL 9.4): $ sudo yum install centos-release-scl $ sudo yum install rh-postgresql94 $ scl enable rh-postgresql94 bash At this point you should be able to use PostgreSQL just as a normal application. An examples of commands run might be: $ postgresql-setup --initdb $ service rh-postgresql94-postgresql start $ psql Since su and sudo commands clear environment variables, we need to run scl enable once again for example after switching to postgres user role: $ su - postgres -c 'scl enable rh-postgresql94 -- psql' In order to view the individual components included in this collection, including additional subpackages, you can run: $ sudo yum list rh-postgresql94\* About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collection rh-postgresql94 delivers version 9.4 of the PostgreSQL server and related client tools. The collection postgresql92 delivers version 9.2 of the PostgreSQL server and related client tools. The collections also include client library libpq.so, which is however only meant to be used by the server, while other client applications are advised to use the client library available in postgresql-libs package from base system. For more on the PostgreSQL, see http://www.postgresql.org. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the PostgreSQL collections being released here, we also build and deliver other databases, web servers, and language stacks including multiple versions of MySQL, MariaDB, Apache HTTP Server, NodeJS, Ruby, Python and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every second Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ Message: 4 Date: Mon, 21 Dec 2015 17:06:02 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for PostgreSQL 9.2 and 9.4 on CentOS Linux 7 x86_64 SCL Message-ID: <5678236A.2070404(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of versions 9.2 and 9.4 of the PostgreSQL server on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps (example of PostgreSQL 9.4): $ sudo yum install centos-release-scl $ sudo yum install rh-postgresql94 $ scl enable rh-postgresql94 bash At this point you should be able to use PostgreSQL just as a normal application. An examples of commands run might be: $ postgresql-setup --initdb $ systemctl start rh-postgresql94-postgresql $ psql Since su and sudo commands clear environment variables, we need to run scl enable once again for example after switching to postgres user role: $ su - postgres -c 'scl enable rh-postgresql94 -- psql' In order to view the individual components included in this collection, including additional subpackages, you can run: $ sudo yum list rh-postgresql94\* About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collection rh-postgresql94 delivers version 9.4 of the PostgreSQL server and related client tools. The collection postgresql92 delivers version 9.2 of the PostgreSQL server and related client tools. The collections also include client library libpq.so, which is however only meant to be used by the server, while other client applications are advised to use the client library available in postgresql-libs package from base system. For more on the PostgreSQL, see http://www.postgresql.org. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the PostgreSQL collections being released here, we also build and deliver other databases, web servers, and language stacks including multiple versions of MySQL, MariaDB, Apache HTTP Server, NodeJS, Ruby, Python and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every second Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ Message: 5 Date: Mon, 21 Dec 2015 17:06:47 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for MongoDB 2.4 and 2.6 on CentOS Linux 6 x86_64 SCL Message-ID: <56782397.3060105(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of versions 2.4 and 2.6 of the MongoDB server on CentOS Linux 6 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps (example of MongoDB 2.6): $ sudo yum install centos-release-scl $ sudo yum install rh-mongodb26 rh-mongodb26-mongodb $ scl enable rh-mongodb26 bash At this point you should be able to use MongoDB just as a normal application. An examples of commands run might be: $ service rh-mongodb26-mongod start $ mongo In order to view the individual components included in this collection, including additional subpackages, you can run: $ sudo yum list rh-mongodb26\* About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collection rh-mongodb26 delivers version 2.6 of the MongoDB server (with daemon called rh-mongodb26-mongod) and related client tools. The collection mongodb24 delivers version 2.4 of the MongoDB server (with daemon called mongodb24-mongodb) and related client tools. Both collections also include mongo-java-driver to connect to MongoDB server in Java. For more on the MongoDB, see http://mongodb.org. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the MongoDB collections being released here, we also build and deliver other databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, NodeJS, Ruby, Python and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every second Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ Message: 6 Date: Mon, 21 Dec 2015 17:07:19 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for MongoDB 2.4 and 2.6 on CentOS Linux 7 x86_64 SCL Message-ID: <567823B7.6060603(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of versions 2.4 and 2.6 of the MongoDB server on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps (example of MongoDB 2.6): $ sudo yum install centos-release-scl $ sudo yum install rh-mongodb26 rh-mongodb26-mongodb $ scl enable rh-mongodb26 bash At this point you should be able to use MongoDB just as a normal application. An examples of commands run might be: $ systemctl start rh-mongodb26-mongod $ mongo In order to view the individual components included in this collection, including additional subpackages, you can run: $ sudo yum list rh-mongodb26\* About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collection rh-mongodb26 delivers version 2.6 of the MongoDB server (with daemon called rh-mongodb26-mongod) and related client tools. The collection mongodb24 delivers version 2.4 of the MongoDB server (with daemon called mongodb24-mongodb) and related client tools. Both collections also include mongo-java-driver to connect to MongoDB server in Java. For more on the MongoDB, see http://mongodb.org. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the MongoDB collections being released here, we also build and deliver other databases, web servers, and language stacks including multiple versions of PostgreSQL, MariaDB, Apache HTTP Server, NodeJS, Ruby, Python and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every second Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ Message: 7 Date: Mon, 21 Dec 2015 17:20:23 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for MySQL 5.5 and 5.6 on CentOS Linux 7 x86_64 SCL Message-ID: <567826C7.3090806(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of versions 5.5 and 5.6 of the MySQL on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps (example of MySQL 5.6): $ sudo yum install centos-release-scl $ sudo yum install rh-mysql56 $ scl enable rh-mysql56 bash At this point you should be able to use MySQL just as a normal application. An examples of commands run might be: $ systemctl start rh-mysql56-mysqld $ mysql In order to view the individual components included in this collection, including additional subpackages plugins, you can run: $ sudo yum list rh-mysql56\* About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collection rh-mysql56 delivers version 5.6 of the MySQL server (with daemon called rh-mysql56-mysqld) and related client tools. The collection mysql55 delivers version 5.5 of the MySQL server (with daemon called mysql55-mysqld) and related client tools. Both the collections include no client library libmysqlclient.so and client applications are advised to use the client library available in mysql-libs package from base system. For more on the MySQL, see https://www.mysql.com. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the MySQL collections being released here, we also build and deliver other databases, web servers, and language stacks including multiple versions of MariaDB, PostgreSQL, MongoDB Apache HTTP Server, NodeJS, Ruby, Python and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every second Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ Message: 8 Date: Mon, 21 Dec 2015 17:20:31 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for MySQL 5.5 and 5.6 on CentOS Linux 6 x86_64 SCL Message-ID: <567826CF.2020709(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of versions 5.5 and 5.6 of the MySQL on CentOS Linux 6 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps (example of MySQL 5.6): $ sudo yum install centos-release-scl $ sudo yum install rh-mysql56 $ scl enable rh-mysql56 bash At this point you should be able to use MySQL just as a normal application. An examples of commands run might be: $ service rh-mysql56-mysqld start $ mysql In order to view the individual components included in this collection, including additional subpackages plugins, you can run: $ sudo yum list rh-mysql56\* About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collection rh-mysql56 delivers version 5.6 of the MySQL server (with daemon called rh-mysql56-mysqld) and related client tools. The collection mysql55 delivers version 5.5 of the MySQL server (with daemon called mysql55-mysqld) and related client tools. Both the collections include no client library libmysqlclient.so and client applications are advised to use the client library available in mysql-libs package from base system. For more on the MySQL, see https://www.mysql.com. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the MySQL collections being released here, we also build and deliver other databases, web servers, and language stacks including multiple versions of MariaDB, PostgreSQL, MongoDB Apache HTTP Server, NodeJS, Ruby, Python and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every second Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ Message: 9 Date: Mon, 21 Dec 2015 17:20:36 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for MariaDB 5.5 and 10.0 on CentOS Linux 6 x86_64 SCL Message-ID: <567826D4.7060900(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of versions 5.5 and 10.0 of the MariaDB server on CentOS Linux 6 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps (example of MariaDB 10.0): $ sudo yum install centos-release-scl $ sudo yum install rh-mariadb100 $ scl enable rh-mariadb100 bash At this point you should be able to use MariaDB just as a normal application. An examples of commands run might be: $ service rh-mariadb100-mariadb start $ mysql In order to view the individual components included in this collection, including additional subpackages plugins, you can run: $ sudo yum list rh-mariadb100\* About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collection rh-mariadb100 delivers version 10.0 of the MariaDB server (with daemon called rh-mariadb100-mariadb) and related client tools. The collection mariadb55 delivers version 5.5 of the MariaDB server (with daemon called mariadb55-mariadb) and related client tools. Both the collections include no client library libmysqlclient.so and client applications are advised to use the client library available in mysql-libs package from base system. For more on the MariaDB, see https://mariadb.org. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the MariaDB collections being released here, we also build and deliver other databases, web servers, and language stacks including multiple versions of MySQL, PostgreSQL, MongoDB Apache HTTP Server, NodeJS, Ruby, Python and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every second Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ Message: 10 Date: Mon, 21 Dec 2015 17:20:43 +0100 From: Honza Horak <hhorak(a)redhat.com> To: centos-announce(a)centos.org Subject: [CentOS-announce] Announcing release for MariaDB 5.5 and 10.0 on CentOS Linux 7 x86_64 SCL Message-ID: <567826DB.4040301(a)redhat.com> Content-Type: text/plain; charset=utf-8; format=flowed I am pleased to announce the immediate availability of versions 5.5 and 10.0 of the MariaDB server on CentOS Linux 7 x86_64, delivered via a Software Collection (SCL) built by the SCLo Special Interest Group (https://wiki.centos.org/SpecialInterestGroup/SCLo) QuickStart ---------- You can get started in three easy steps (example of MariaDB 10.0): $ sudo yum install centos-release-scl $ sudo yum install rh-mariadb100 $ scl enable rh-mariadb100 bash At this point you should be able to use MariaDB just as a normal application. An examples of commands run might be: $ systemctl start rh-mariadb100-mariadb $ mysql In order to view the individual components included in this collection, including additional subpackages plugins, you can run: $ sudo yum list rh-mariadb100\* About Software Collections -------------------------- Software Collections give you the power to build, install, and use multiple versions of software on the same system, without affecting system-wide installed packages. Each collection is delivered as a group of RPMs, with the grouping being done using the name of the collection as a prefix of all packages that are part of the software collection. The collection rh-mariadb100 delivers version 10.0 of the MariaDB server (with daemon called rh-mariadb100-mariadb) and related client tools. The collection mariadb55 delivers version 5.5 of the MariaDB server (with daemon called mariadb55-mariadb) and related client tools. Both the collections include no client library libmysqlclient.so and client applications are advised to use the client library available in mysql-libs package from base system. For more on the MariaDB, see https://mariadb.org. The SCLo SIG in CentOS ---------------------- The Software Collections SIG group is an open community group co-ordinating the development of the SCL technology, and helping curate a reference set of collections. In addition to the MariaDB collections being released here, we also build and deliver other databases, web servers, and language stacks including multiple versions of MySQL, PostgreSQL, MongoDB Apache HTTP Server, NodeJS, Ruby, Python and others. Software Collections SIG release was announced at https://lists.centos.org/pipermail/centos-announce/2015-October/021446.html You can learn more about Software Collections concepts at: http://softwarecollections.org You can find information on the SIG at https://wiki.centos.org/SpecialInterestGroup/SCLo ; this includes howto get involved and help with the effort. We meet every second Wednesday at 16:00 UTC in #centos-devel (ref: https://www.centos.org/community/calendar) for an informal open forum open to anyone who might have comments, concerns or wants to get started with SCL's in CentOS. Enjoy! Honza SCLo SIG member ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org https://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 130, Issue 10 ************************************************

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss