Discuss

discuss@lists.centos.org

34753 discussions

CentOS 7 and mobile broadband Ericsson F5521gw
by Tim 26 May '15

26 May '15

Hello all, I have got problems to get my mobile broadband connection running on my Lenovo T420. But NetworkManager doesn't seem to connect. I ran through the wizard for mobile broadband connections but it doesn't work. The Ericsson f5521gw seems to run with cdc_ndm module. I also installed modem-manager-gui and unlocked my sim by using mmcli. But still NetworkManager can't establish a connection. I also can't delete connection out of the NM-GUI so I needed to remove them from /etc/NetworkManager/system-connections. Did I miss something? The logs seem to be fine so far. My CentOS 7 has all recent updates applied. Thanks in advance Tim

1 0

nmcli, pppoe (ADSL login and password)
by Mihamina Rakotomandimby 26 May '15

26 May '15

Hi all, My target is: CentOS 7 on a X less gateway My internet provider provides a pppoe connection with a login and a password On CentOS6, I used to setip it up with rp-pppoe wizzard and it works: it sets up the needed things to make the network init script launch the connection at boot. I would like to learn how to do it with NM and CentOS 7. How to invoke nmcli in order to have it connected at boot? Thank you.

1 0

Centos 7.1 openldap-2.4.39 question
by Paul R. Ganci 26 May '15

26 May '15

I have two instances of an openldap-2.4.39 server running with syncrepl in a master-master replication setup. These are Centos 7.1 test servers which have been running for over 2 months now with no problems. Partly the good behavior of the LDAP servers is due to very little exercise. Yesterday I decided to try and see exactly how well replication was working. With server-2 up and running I tried these sequences of commands on server-1 (domain, user and DNs have been changed): server-1> systemctl stop slapd server-1> slapadd -l useradd.ldif server-1> systemctl start slapd server-1> ldapsearch -ZZ -W -D cn=Boss,dc=example,dc=com -b ou=People,dc=example,dc=com uid=newuser # extended LDIF # # LDAPv3 # base <ou=People,dc=example,dc=com> with scope subtree # filter: uid=newuser # requesting: ALL # # newuser, People, example.com dn: uid=newuser,ou=People,dc=example,dc=com uid: newuser cn: NEW01- newuser uidNumber: 100510 objectClass: posixAccount objectClass: shadowAccount objectClass: person objectClass: organizationalPerson objectClass: inetOrgPerson objectClass: top gecos: NEW01- newuser sn: NEW01- newuser loginShell: /bin/bash gidNumber: 100510 homeDirectory: /users/home/newuser userPassword:: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx # search result search: 3 result: 0 Success # numResponses: 2 # numEntries: 1 As you can see the user was added correctly. However after a few minutes to give replication a chance to work I went over to server-2 and tried the equivalent ldapsearch command: server-2> ldapsearch -ZZ -W -D cn=Boss,dc=example,dc=com -b ou=People,dc=example,dc=com uid=newuser # extended LDIF # # LDAPv3 # base <ou=People,dc=example,dc=com> with scope subtree # filter: uid=newuser # requesting: ALL # # search result search: 3 result: 0 Success # numResponses: 1 No matter how long I wait, the newuser is never replicated on server=2. So I tried something different. After putting back the LDAP databases so that they were consistent I did this sequence on server-1 server-1> ldapadd -ZZ -W -D cn=Boss,dc=example,dc=com -b ou=People,dc=example,dc=com -f useradd.ldif This time the ldapsearch command: ldapsearch -ZZ -W -D cn=Boss,dc=example,dc=com -b ou=People,dc=example,dc=com uid=newuser returns the new user on both server-1 and server-2! What I found is that as long as I use ldapadd, ldapdelete and ldapmodify the LDAP databases replicate correctly in a master-master mode. My first question: Should the first sequence of commands with the slapadd command work or am I expecting behavior that is not supported? My second question: If the first sequence of commands with the slapadd command should work but does not can anyone suggest a reason as to why? For example do both server-1 and server-2 have to be shutdown before doing the slapadd? Thank you. -- Paul (ganci(a)nurdog.com) (303)257-5208

2 1

Systemd
by Kirk Bocek 25 May '15

25 May '15

So I've built my first CentOS 7 host and am learning all the new ways of doing things. I setup and enabled ntpd but after a reboot I get: $ systemctl status ntpd ntpd.service - Network Time Service Loaded: loaded (/usr/lib/systemd/system/ntpd.service; enabled) Active: inactive (dead) After issuing: $ systemctl start ntpd Ntpd runs just fine. But why isn't it loading at boot time?

11 19

AUTO: Sergio Luis Chavarria Cisneros is out of the office (returning 28/05/2015)
by slchavarria＠iusacell.com.mx 25 May '15

25 May '15

I am out of the office until 28/05/2015. Estaré ausente de la oficina, para cualquier apoyo que necesites favor de contactar a Jose Manuel Flores Dublan Email: jfloresd(a)iusacell.com.mx Cel: 5530300533 Note: This is an automated response to your message "CentOS Digest, Vol 124, Issue 25" sent on 05/25/2015 7:00:02 AM. This is the only notification you will receive while this person is away. “Este mensaje y cualquier archivo que se adjunte al mismo es propiedad de GRUPO IUSACELL y podría contener información privada y privilegiada para uso exclusivo del destinatario. Si usted ha recibido esta comunicación por error, no está autorizado para copiar, retransmitir, utilizar o divulgar este mensaje ni los archivos adjuntos. En este caso por favor notifique inmediatamente al remitente por este mismo conducto. Gracias.”

1 0

mod_suPHP
by Bob Puff 24 May '15

24 May '15

I have been trying to get mod_suPHP working on Centos 7's httpd, just as I've done with versions 5 and 6. I found a couple RPMs that others have built, and I even compiled suPHP from source, and got a successful compile. Each time, I can see with phpinfo() that the mod_suPHP module did indeed load, yet I cannot seem to get any script to run in a user other than the default of 'nobody'. Has anyone else had success with this? For a virtual hosting environment, I really need this type of functionality. 7 is definitely a different animal, but there must be something I am missing. I do have selinux disabled. Bob

2 1

CentOS-Base.repo baseurl commented out
by Tim Semeijn 24 May '15

24 May '15

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Dear, Recently I have noticed that on all my CentOS machines the CentOS-Base.repo file seems to have been modified resulting in all baseurl= lines being commented out. Did I miss something that was planned or is this a bug? Best regards, - -- Tim Semeijn Babylon Network pgp 0x5B8A4DDF -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.19 (Darwin) Comment: GPGTools - http://gpgtools.org iQIcBAEBCgAGBQJVYbnrAAoJEIZioqpbik3fQW0P+gK3GcGdsOHORXgRKWA/QcAP 7n1TkEhGNflTRDcfEwF/uvO3ukdcQ94L9vnC6kxFmzCmDyLy/aph/Ozfpl429/rO k4iy2vplEnEbiLValkmvEJ22U/cjThTyMZ3DDKMUVOBa+MTRbh9BueqLR6S1WLso uxLKXHUAwqfIFKnD7B0vuZcdYf9bRDcmvxkK42rmMKnYEVSsWEK/0+ZWv6VTWRam MJ+VedfC86Z7ftp694SsMwnjR/u913xaEmwze4ErshLC8RSto0HMbBZ9tkgyVkos Ez/PphGJaYbeCMlFQIngSYUa8uBhGKOWD07RGVVs+IIPjq8uQ5mKY7+xkpSWI0Ew Nytj/0vSPWOmvAFACyz5+sCNKRp8ig4XuE7vdd9OVlE7Vh+MKyUEs0SK57JSD8Tc rKaYBchNJrCurW5YY1KrwYB6wWcDTf0QvfHQYJxIVEvrxho9JIXgNkYhGyZpZo8L 1J9eU7LNjalnr7ySe6DxU+50uAaIG5qgavLvv1PMUlfHy3rvVVOPctXMY+jb3OCr NICKYgkE7LEhbbnPcTemrR44H9OuBuWOEu67yn4hVYIi0yzRq8e6D1NVpaVMx+Rv wocncxIy7drEl1dcs7DwHe85fWwwavtMnRwm+c+ObhbhHqksoZA2OziNP6DEKUlN jgmV29E+Jnc96+ckj7B/ =9qZe -----END PGP SIGNATURE-----

3 8

can i get .spec file for apache httpd of centos?
by Vijendra Agarwal (vijagarw) 23 May '15

23 May '15

Hi All, Currently my system is using httpd 2.2.27. As there were many Vulnerability fixes released under 2.2.29, I would like to upgrade the Apache httpd. My system is having CentOS 6.5. I checked on CentOS Repos using yum but could not find the latest httpd rpm from there. So I am building the httpd rpm from the source tar ball downloaded from apache site. I am able to build the rpm successfully but after installation I am facing lot many different issues such as 1. new rpm does not show anything for below command rpm –q httpd —changelog 2. If I check the compiler option used in httpd 2.2.27 and 2.2.29 are very different. For 2.2.27 :- httpd: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic (Build by CentOS) For 2.2.29 :- httpd: -O2 –g (Build by myself) Query ===== 1. How to provide the above compiler option so that the rpm get build with them? 2. Is it possible to get httpd.spec file using which CentOS has build the httpd rpm? Thanks Vijendra.

3 3

No announcement for CEBA-2015-1018
by Leonard den Ottolander 23 May '15

23 May '15

Hi, Received lvm2 updates for CEBA-2015-1018 but haven't seen an announcement on CentOS announce yet nor can I find it in the archives. Is it still in the pipeline or did something go wrong? Regards, Leonard. -- mount -t life -o ro /dev/dna /genetic/research

2 2

Centos 6.6 Can't connect to local MySQL server through socket /var/lib/MySQL/MySQL.sock (error 2002)‏
by Graham Wilman 22 May '15

22 May '15

Hi Total newby to centos I am currently assisting a community radio station set up in the Uk we are using a server based system for our playout software, unfortunately at the moment one of our client servers is experience the above error I came across the error on our main server a few weeks ago and found the solution just by reinstalling the MySQL db but I have tried to deploy the same fix on our client server otherwise known as studio-b client but unfortunately this has not solved the problem any assistance with this would be very much appreciated. All the best Graham Wilman

6 6

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss