Discuss

discuss@lists.centos.org

34753 discussions

Start a nNew thread

CentOS-announce Digest, Vol 109, Issue 11
by centos-announce-request＠centos.org 20 Mar '14

20 Mar '14

1 0

CentOS-announce Digest, Vol 109, Issue 10
by centos-announce-request＠centos.org 19 Mar '14

19 Mar '14

1 0

Verizon DSL + rp-pppoe + CentOS 6.5
by Max Pyziur 18 Mar '14

18 Mar '14

Greetings, I've just upgrade a home server to CentOS 6.5 with a new dual-core processor and mobo. I see that with the CentOS 6.x release rp-pppoe can be run as a daemon. I've looked through some online one-page setup notes for rp-pppoe, but nowhere is there a discussion of running it as a daemon. Until now, I've cobbled an ifcfg-ppp0 file and placed it in /etc/sysconfig/network-scripts. The connection has worked; however, I'd like to have a proper and coherent implemention on this iteration. If anyone has experience or insight on this setup, I would appreciate it. Much thanks, Max Pyziur pyz(a)brama.com

2 2

forestalling kerberos for a non-kerberos user
by m.roth＠5-cent.us 18 Mar '14

18 Mar '14

Well... we've got this annoying message in the logs: a 5.10 nfs server complains about an nfs4_CB timeout from the client, which is running FC19. My twist is that motion - remember me fighting motion? - is the "user" whose home directory needs to be mounted, to store pics & video. It, of course, has no kerberos ticket. Ideally, I'd like to find a way to tell nfs not to check kerberos for that user. If anyone knows a way to do that, or some other option so that it skips kerberos, I'm interested. One last note: krb5 is heavily in use for all normal users, so it's not going away. mark

1 0

USB to Ethernet problem
by Giri Prasad 18 Mar '14

18 Mar '14

Hello All, I installed Centos 6.5 64 bit on a Dell Vostro 1550 laptop with i3 core. The kernel installed was 2.6.32-431.el6.x86_64. I was not able to compile kernel modules, even after installing the kernel headers, kernel source rpms. So I downloaded the kernel linux-3.10.31.tar.xz, extracted it, and did the following: make defconfig change CONFIG_USB_USBNET=y, in the .config. make ASIX AX88xxx Based USB 2.0 Ethernet Adapters (USB_NET_AX8817X) [Y/n/m/?] (NEW) n ASIX AX88179/178A USB 3.0/2.0 to Gigabit Ethernet (USB_NET_AX88179_178A) [Y/n/m/?] (NEW) n All the other options selected the default. make modules make modules_install make install Then I booted from 3.10 kernel, which went thru fine. After logging in into the 3.10 kernel, I compiled and insmod the asix driver for usb to ethernet. Upon insmod, the eth1 interface comes up, but with no IPV4 address assigned. So I assigned a static IP address using ifconfig. Then added a route for the default gateway. Now, after assigning a static IPV4 address, this eth1 is pinging to the default gateway 192.168.1.1. But eth1 is not pinging/connecting to the external internet. Can someone please provide some answers. I am using the device from www.svbinternational.com. The device is labeled USB 2.0 to network 10/100Mbps ethernet adapter. Device id, as can be seen from lsusb is: Device 003: ID 0b95:772b ASIX Electronics Corp. AX88772B. Thanks in advance. Regards, Giri AX88772C_772B_772A_760_772_178_LINUX_DRIVER_v4.12.0_Source.tar.bz2 [root@gpcentospc1 AX88772C_772B_772A_760_772_178_LINUX_DRIVER_v4.12.0_Source]# insmod asix.ko [root@gpcentospc1 ~]# lsmod Module Size Used by asix 47587 0 [root@gpcentospc1 ~]# ifconfig (DEFAULT NO IP ADDRESS) eth1 Link encap:Ethernet HWaddr 00:00:00:00:00:01 inet6 addr: fe80::200:ff:fe00:1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:5 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:228 (228.0 b) TX bytes:954 (954.0 b) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:52 errors:0 dropped:0 overruns:0 frame:0 TX packets:52 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4040 (3.9 KiB) TX bytes:4040 (3.9 KiB) [root@gpcentospc1 ~]# ifconfig eth1 192.168.1.20 netmask 255.255.255.0 broadcast 192.168.1.255 [root@gpcentospc1 ~]# ifconfig eth1 Link encap:Ethernet HWaddr 00:00:00:00:00:01 inet addr:192.168.1.20 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::200:ff:fe00:1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:438 (438.0 b) TX bytes:1992 (1.9 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:52 errors:0 dropped:0 overruns:0 frame:0 TX packets:52 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4040 (3.9 KiB) TX bytes:4040 (3.9 KiB) [root@gpcentospc1 ~]# route add default gw 192.168.1.1 [root@gpcentospc1 ~]# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.1.1 0.0.0.0 UG 0 0 0 eth1 192.168.1.0 * 255.255.255.0 U 0 0 0 eth1 [root@gpcentospc1 ~]# lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0b95:772b ASIX Electronics Corp. AX88772B Bus 001 Device 004: ID 0461:4d81 Primax Electronics, Ltd Dell N889 Optical Mouse Bus 001 Device 005: ID 0a5c:21bc Broadcom Corp. BCM2070 Bluetooth 2.1 + EDR Bus 001 Device 006: ID 0c45:643e Microdia Bus 002 Device 003: ID 0bda:0138 Realtek Semiconductor Corp. RTS5138 Card Reader Controller [root@gpcentospc1 ~]# ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=254 time=3.73 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=254 time=1.88 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=254 time=1.95 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=254 time=1.95 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=254 time=1.87 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=254 time=1.93 ms 64 bytes from 192.168.1.1: icmp_seq=7 ttl=254 time=1.91 ms 64 bytes from 192.168.1.1: icmp_seq=8 ttl=254 time=1.86 ms 64 bytes from 192.168.1.1: icmp_seq=9 ttl=254 time=1.97 ms 64 bytes from 192.168.1.1: icmp_seq=10 ttl=254 time=1.88 ms ^C --- 192.168.1.1 ping statistics --- 10 packets transmitted, 10 received, 0% packet loss, time 9778ms rtt min/avg/max/mdev = 1.867/2.095/3.731/0.549 ms [root@gpcentospc1 ~]# ping google.com ping: unknown host google.com [root@gpcentospc1 ~]# uname -a Linux gpcentospc1.cruzesoft.com 3.10.31 #8 SMP Tue Mar 18 01:52:26 IST 2014 x86_64 x86_64 x86_64 GNU/Linux [root@gpcentospc1 ~]# [root@gpcentospc1 ~]# [root@gpcentospc1 ~]# ethtool -i eth1 driver: asix version: 22-Aug-2005 firmware-version: ASIX AX88772B USB 2.0 Ethernet bus-info: usb-0000:00:1a.0-1.1 supports-statistics: no supports-test: no supports-eeprom-access: yes supports-register-dump: no supports-priv-flags: no [root@gpcentospc1 ~]# [root@gpcentospc1 ~]# The same device on Windows 7 64 bit, same laptop, gets the IP Address and mask as 169.254.74.198, whereas the wireless interface is properly assigned the IPV4 address as 192.168.1.2 : Autoconfiguration IPv4 Address. . : 169.254.74.198 Subnet Mask . . . . . . . . . . . : 255.255.0.0 C:\Users\giri>ipconfig Windows IP Configuration Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::606c:d214:57c9:4ac6%17 Autoconfiguration IPv4 Address. . : 169.254.74.198 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : fe80::ed2:b5ff:fe13:d3d4%17 Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::7448:5c68:7e43:1108%15 IPv4 Address. . . . . . . . . . . : 192.168.1.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : fe80::ed2:b5ff:fe13:d3d4%15 192.168.1.1

5 6

Slow RAID resync
by Jeff Allison 18 Mar '14

18 Mar '14

OK todays problem. I have a HP N54L Microserver running centos 6.5. In this box I have a 3x2TB disk raid 5 array, which I am in the process of extending to a 4x2TB raid 5 array. I've added the new disk --> mdadm --add /dev/md0 /dev/sdb And grown the array --> mdadm --grow /dev/md0 --raid-devices=4 Now the problem the resync speed is v slow, it refuses to rise above 5MB, in general it sits at 4M. from looking at glances it would appear that writing to the new disk is the bottle neck, /dev/sdb is the new disk. Disk I/O In/s Out/s md0 0 0 sda1 0 0 sda2 0 1K sdb1 3.92M 0 sdc1 24.2M 54.7M sdd1 11.2M 54.7M sde1 16.3M 54.7M I partitiioned the disk with --> parted -a optimal /dev/sdb [root@nas ~]# parted -a optimal /dev/sdb GNU Parted 2.1 Using /dev/sdb Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA ST2000DM001-1E61 (scsi) Disk /dev/sdb: 2000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 2000GB 2000GB primary ntfs raid There is no ntfs filesystem on the disk, I've still not worked out how to remove that flag. I've followed the article here --> http://www.cyberciti.biz/tips/linux-raid-increase-resync-rebuild-speed.html to attempt to speed it up but no joy. Any Ideas what I've done wrong? parted output [root@nas ~]# parted -l Model: ATA ST31000528AS (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 525MB 524MB primary ext4 boot 2 525MB 1000GB 1000GB primary lvm Model: ATA ST2000DM001-1E61 (scsi) Disk /dev/sdb: 2000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 2000GB 2000GB primary ntfs raid Model: ATA ST2000DM001-9YN1 (scsi) Disk /dev/sdc: 2000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 2000GB 2000GB primary raid Model: ATA WDC WD25EZRS-00J (scsi) Disk /dev/sdd: 2500GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 2000GB 2000GB primary ntfs raid Model: ATA ST2000DL001-9VT1 (scsi) Disk /dev/sde: 2000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 2000GB 2000GB primary raid

2 2

CentOS-announce Digest, Vol 109, Issue 9
by centos-announce-request＠centos.org 18 Mar '14

18 Mar '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2014:0305 Moderate CentOS 5 samba Update (Johnny Hughes) 2. CEBA-2014:0297 CentOS 6 gzip FASTTRACK Update (Johnny Hughes) 3. CEBA-2014:0299 CentOS 6 device-mapper-multipath Update (Johnny Hughes) 4. CEBA-2014:0302 CentOS 6 qemu-kvm Update (Johnny Hughes) 5. CEBA-2014:0303 CentOS 6 glib2 Update (Johnny Hughes) 6. CESA-2014:0304 Important CentOS 6 mutt Update (Johnny Hughes) 7. CESA-2014:0306 Moderate ruby193-rubygem-actionpack SCL Security Update (Johnny Hughes) 8. CEBA-2014:0296 CentOS 6 suitesparse FASTTRACK Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 17 Mar 2014 19:05:31 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:0305 Moderate CentOS 5 samba Update To: centos-announce(a)centos.org Message-ID: <20140317190531.GA24210(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:0305 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-0305.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: f3cdf78d5aefaf77c8c556f6b4d611d3b8e24ac637be33b50743bf0166695f5c libsmbclient-3.0.33-3.40.el5_10.i386.rpm f8d217a096740aa7ebd46c6d3d36517296d8334156167bc7bb8cf59c77d676fe libsmbclient-devel-3.0.33-3.40.el5_10.i386.rpm dfce23d491ac7f25a4fc6dd87dfd325ca98c62ed29aa3733afed17cb1ccd4d38 samba-3.0.33-3.40.el5_10.i386.rpm f31e1cba3055ddfdea341e45a4a404d64543989dd09d1e5f9e2149905258ea6e samba-client-3.0.33-3.40.el5_10.i386.rpm dbdaaca5ce7f3f88177f61fc2df9470e9d2d1d47d4e1bc909acda448eded1e48 samba-common-3.0.33-3.40.el5_10.i386.rpm f8492e849cc54b0942e7fbc9619e3717073ec5a2b43a1a38872025cf789ef4da samba-swat-3.0.33-3.40.el5_10.i386.rpm x86_64: f3cdf78d5aefaf77c8c556f6b4d611d3b8e24ac637be33b50743bf0166695f5c libsmbclient-3.0.33-3.40.el5_10.i386.rpm c4ee9a9192bdd9e9bb94aec8e9c5431cd21f8fd433757439958ba3069059533e libsmbclient-3.0.33-3.40.el5_10.x86_64.rpm f8d217a096740aa7ebd46c6d3d36517296d8334156167bc7bb8cf59c77d676fe libsmbclient-devel-3.0.33-3.40.el5_10.i386.rpm 5b18aa9c1bf34a03c5dd9cd2f2fa59709908d4a7e0bebc63174aac97dc4d34c5 libsmbclient-devel-3.0.33-3.40.el5_10.x86_64.rpm 05acba32d694e38874a7ccfd18dc0e53ed6f64e90e2c02976e396ffced5225a4 samba-3.0.33-3.40.el5_10.x86_64.rpm cfd6e538543451b67453e0af9ec00a5caac70e66071c6b912af9e932f0b34131 samba-client-3.0.33-3.40.el5_10.x86_64.rpm dbdaaca5ce7f3f88177f61fc2df9470e9d2d1d47d4e1bc909acda448eded1e48 samba-common-3.0.33-3.40.el5_10.i386.rpm 99fbe4b217cb0fdf5f7e44c71b59b4a9215bb88d69dd45587c0936899763dbe1 samba-common-3.0.33-3.40.el5_10.x86_64.rpm 9d904d6fcd3958f60a69f0ad21d20810a77368e879ff041a09cc96511b98163a samba-swat-3.0.33-3.40.el5_10.x86_64.rpm Source: 8433588e57b9554fb6eba9ae7c2ce80761b969188548b784cdc469404bc76d44 samba-3.0.33-3.40.el5_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 17 Mar 2014 21:16:26 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0297 CentOS 6 gzip FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20140317211626.GA925(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0297 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0297.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: d58a70566f97916a707a4fea7a9ccec9d78e79f1bd5e0272b41668f1cfc6decb gzip-1.3.12-22.el6.i686.rpm x86_64: 6b192814cea63bc95bbfe03d76869cdcee71c687209289216a7255d530991f20 gzip-1.3.12-22.el6.x86_64.rpm Source: 5e4cd2ce721ac138d275963b4bbfe05b5134a51ba2f25d26c9b0ba736256fe2d gzip-1.3.12-22.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Mon, 17 Mar 2014 21:17:13 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0299 CentOS 6 device-mapper-multipath Update To: centos-announce(a)centos.org Message-ID: <20140317211713.GA1169(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0299 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0299.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 073f7dd6869170f351e9b799eff499dd50c508d6e57f786152c45c6fdf602a38 device-mapper-multipath-0.4.9-72.el6_5.1.i686.rpm 801c9ae5d8838bdf862bca1ed37a95bf1abf6659f1f9de293fcf3cec09a2ed14 device-mapper-multipath-libs-0.4.9-72.el6_5.1.i686.rpm 5ef8aac1b02b954ca1d7b2c7d95c21ed06830684539d761d0111a5e1bd5888a9 kpartx-0.4.9-72.el6_5.1.i686.rpm x86_64: 9a52bc69b2ea56a99147f3e203200d3f64292488fcd5434250abb0c1477de8f5 device-mapper-multipath-0.4.9-72.el6_5.1.x86_64.rpm 801c9ae5d8838bdf862bca1ed37a95bf1abf6659f1f9de293fcf3cec09a2ed14 device-mapper-multipath-libs-0.4.9-72.el6_5.1.i686.rpm d863f3141cf51c9c0888f136d0561c1bd458ae810ed3213b59e0ad6bf04fbbfb device-mapper-multipath-libs-0.4.9-72.el6_5.1.x86_64.rpm 5f17ff89bfa07430615276102ffab37c50a12666a68a6e5f88740c3d6ff6f485 kpartx-0.4.9-72.el6_5.1.x86_64.rpm Source: e80b4b13dd03491ecb487c87d618a263aaaaabc0b3338928ee6ce6c331cda348 device-mapper-multipath-0.4.9-72.el6_5.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Mon, 17 Mar 2014 21:18:14 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0302 CentOS 6 qemu-kvm Update To: centos-announce(a)centos.org Message-ID: <20140317211814.GA1402(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0302 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0302.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 283d0874f8d9a69edef45e9e70f01685e2aab9a9b2ee8f742f2d38a275f51589 qemu-guest-agent-0.12.1.2-2.415.el6_5.6.i686.rpm x86_64: 142f833c373a25d2c20dfb5fa80adbc3c3ee57a252faf58916812acd2dd29746 qemu-guest-agent-0.12.1.2-2.415.el6_5.6.x86_64.rpm 18f37225f03c23813c678289e4ce5b307bec5e74e14c842a6ba70c1905652ab9 qemu-img-0.12.1.2-2.415.el6_5.6.x86_64.rpm e2de22436736cb84435555dba5c86d528325aa8d577585891ded6cc2be57e489 qemu-kvm-0.12.1.2-2.415.el6_5.6.x86_64.rpm 154ee3376b9b5a331ed59059b1a1cd3f62df29be74aa73c35db82733690d4b17 qemu-kvm-tools-0.12.1.2-2.415.el6_5.6.x86_64.rpm Source: c93a85dbe108ceb0f6854d422d281b883dee115ea8e022e9052f80822bca110a qemu-kvm-0.12.1.2-2.415.el6_5.6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Mon, 17 Mar 2014 21:18:51 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0303 CentOS 6 glib2 Update To: centos-announce(a)centos.org Message-ID: <20140317211851.GA1768(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0303 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0303.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: aafb14e964ab0725444d7cc5db5d157f5885015d1167678b7a7346ffdf3f31c1 glib2-2.26.1-7.el6_5.i686.rpm 961c916b174af5f8bf7a0cce67510effc5bdeba507060ee672fcf277b381252c glib2-devel-2.26.1-7.el6_5.i686.rpm fd138e6f6bbafb77734803f1eb8ce43c8e60779de529580a9b90629815777fd3 glib2-doc-2.26.1-7.el6_5.noarch.rpm 2b7adc5629c13351c4db1b30d3091ff0fbcd5e86c565858dcfff9c9630a20150 glib2-static-2.26.1-7.el6_5.i686.rpm x86_64: aafb14e964ab0725444d7cc5db5d157f5885015d1167678b7a7346ffdf3f31c1 glib2-2.26.1-7.el6_5.i686.rpm 375dbe6f66f579d8250c85533a080bb49888e9f9d2975c5a46927680d490c635 glib2-2.26.1-7.el6_5.x86_64.rpm 961c916b174af5f8bf7a0cce67510effc5bdeba507060ee672fcf277b381252c glib2-devel-2.26.1-7.el6_5.i686.rpm 3057fbe85540514999c48060f1dc44c55e6c42192e0bf5e8cdabd23cd3e49a81 glib2-devel-2.26.1-7.el6_5.x86_64.rpm fd138e6f6bbafb77734803f1eb8ce43c8e60779de529580a9b90629815777fd3 glib2-doc-2.26.1-7.el6_5.noarch.rpm ba86da550aeba8a2e43f3940bd86e160104ce12382cc0f97d553dcf2a7831324 glib2-static-2.26.1-7.el6_5.x86_64.rpm Source: 629d8dcfa97a760bd9d0690e0d92d5a4da8ccf6f178dd55801720e04e7f3a307 glib2-2.26.1-7.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Mon, 17 Mar 2014 21:19:25 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:0304 Important CentOS 6 mutt Update To: centos-announce(a)centos.org Message-ID: <20140317211925.GA1955(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:0304 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-0304.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 48844f0801d2aec6087a14164a5709877c8ac9b5fe947bcd128bd88592e47f74 mutt-1.5.20-4.20091214hg736b6a.el6_5.i686.rpm x86_64: 448ce476c65fd9f97fa7f96430ce8805a196dd3068e99b0ee3e9af80590f89eb mutt-1.5.20-4.20091214hg736b6a.el6_5.x86_64.rpm Source: 812b801b583fc77929259984cdd4494b901bf6deee0bb3d2f84a04a9e9ee6c73 mutt-1.5.20-4.20091214hg736b6a.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 7 Date: Mon, 17 Mar 2014 21:55:16 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:0306 Moderate ruby193-rubygem-actionpack SCL Security Update To: CentOS-announce(a)centos.org Message-ID: <20140317215516.GA7654(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:0306 (CentOS Software Collections) The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) ----------------------------- X86_64 ----------------------------- 7209df8e46b9c9e6a329be6074e3b19e5fa19f94f5cd67a3b5dd0886c2fa317d ruby193-rubygem-actionpack-3.2.8-5.3.el6.centos.alt.noarch.rpm dfa54a9533c9160f34eeb049be46ada43456a469499bddc170314464199b1cef ruby193-rubygem-actionpack-doc-3.2.8-5.3.el6.centos.alt.noarch.rpm ----------------------------- Source: ----------------------------- 859cb3287a57d5d514bdb4492e81974a42eecf1bcdfb861f4102d12c0907d39 ruby193-rubygem-actionpack-3.2.8-5.3.el6.centos.alt.src.rpm ===================================================== The following upstream security issues are addressed in this update: https://rhn.redhat.com/errata/RHSA-2014-0306.html -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos at irc.freenode.net ------------------------------ Message: 8 Date: Mon, 17 Mar 2014 22:00:17 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0296 CentOS 6 suitesparse FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20140317220017.GA7983(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0296 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0296.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e098105f40eb24ac304e3c95eb7d4ca90b42a511f942f6183c8c253019a8baca suitesparse-3.4.0-9.el6.i686.rpm e7b5f432cb80188dfd055fb3370bff2f165aaf116590f61fd70988ec297559d6 suitesparse-devel-3.4.0-9.el6.i686.rpm 87c637f342974bee994703a738c1daef0aec8e65eddf9d9d3d2f33a8e274ad95 suitesparse-doc-3.4.0-9.el6.noarch.rpm 2326c502f317def9bfc4618995d1b7f1e238ecd3508a621a63143713b4f4bf2d suitesparse-static-3.4.0-9.el6.i686.rpm x86_64: e098105f40eb24ac304e3c95eb7d4ca90b42a511f942f6183c8c253019a8baca suitesparse-3.4.0-9.el6.i686.rpm 0b19212595c73a876b6492525dc70ad0754a78bb3fd69b979c1d9b78f6692494 suitesparse-3.4.0-9.el6.x86_64.rpm e7b5f432cb80188dfd055fb3370bff2f165aaf116590f61fd70988ec297559d6 suitesparse-devel-3.4.0-9.el6.i686.rpm 3b77b6a8e981d91cf47549cc09539983856164027167d0c19d1eccf006a05dc0 suitesparse-devel-3.4.0-9.el6.x86_64.rpm 87c637f342974bee994703a738c1daef0aec8e65eddf9d9d3d2f33a8e274ad95 suitesparse-doc-3.4.0-9.el6.noarch.rpm 715c45dee4e2c5abcce65008eb406aeca235bad062be15024a397aecb8236281 suitesparse-static-3.4.0-9.el6.x86_64.rpm Source: f96c838edb689ba56d5516595906de80ea11f9cf02bd4db1e226675b5504d9c1 suitesparse-3.4.0-9.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 109, Issue 9 ***********************************************

1 0

Problem with RW_MOUNT in a diskless system
by Allan Wu 17 Mar '14

17 Mar '14

Hello everyone, I have a problem with setting up a diskless system on CentOS. Currently I have successfully set up a small cluster of diskless clients following the following available HowTos: http://wiki.centos.org/HowTos/DisklessClients https://coda.jlab.org/wiki/index.php/CentOS6_Linux_Diskless_Setup The client system is CentOS 5.10 and the system is read-only. It has been working fine for a while (although I discard some initiation errors, but as of functionality it is working). But recently when I tried to setup autofs to mount some of the directories from NIS server, I've been having problems because /etc/mtab is not writable. I have enabled temporary state in the OS, please find below my /etc/sysconfig/readonly-root: ==================== # Set to 'yes' to mount the system filesystems read-only. READONLY=yes # Set to 'yes' to mount various temporary state as either tmpfs # or on the block device labelled RW_LABEL. Implied by READONLY TEMPORARY_STATE=yes # Place to put a tmpfs for temporary scratch writable space RW_MOUNT=/var/lib/stateless/writable #RW_MOUNT= # Label on local filesystem which can be used for temporary scratch space RW_LABEL=stateless-rw # Options to use for temporary mount RW_OPTIONS= # Label for partition with persistent data STATE_LABEL=stateless-state # Where to mount to the persistent data STATE_MOUNT=/var/lib/stateless/state # Options to use for peristent mount STATE_OPTIONS= CLIENTSTATE=10.0.0.1:/common/diskless/x86/RHEL5/snapshot Now my solution is making a symbolic link for /etc/mtab to its snapshot in /var/lib/stateless/writable. However, since by default it is mounted on tmpfs instead of NFS, every time the machine reboot, mtab is lost and there are all kinds of problem. So I created another mtab.bak and copy that to the RW_MOUNT when system start. That solves my problem, although I feel the approach is really ugly. So my questions are below: 1. How to mount my RW_MOUNT on my NFS snapshot directory by default? The instructions are not clear on this part. 2. If I can use NFS as snapshot, how do I tell the system which file I want to use the writable version in RW_MOUNT, is there a more elegant way to do that? 3. Could someone points me some direction or background on the snapshot idea? I've looked into /etc/rc.sysinit and saw the part to mount the stateless directory, but more information could be helpful. Thank you in advance! Regards, -- Di Wu (Allan) Center of Domain-Specific Computing <http://www.cdsc.ucla.edu/>, Department of Computer Science, UC Los Angeles Email: allwu(a)cs.ucla.edu Phone: 310-982-5215

1 0

How do graphical admin tools requiring root get authentication?
by Samuel Winchenbach 17 Mar '14

17 Mar '14

Hi All, I have created a CentOS 6.5 OpenStack image using kickstart. I have noticed that when connecting directly to the Virtual Machine's console (think connecting directly to the physical machine) all of the system-config, firewall configuration, application update and install GUI applications work fine and prompt for root login when executed. Hoever if I connect to the VM using xrdp with a tiger-vncserver backend the apps either do not work, or take several minutes to prompt for the root password. Here is a post I made in the forums that has no response: https://www.centos.org/forums/viewtopic.php?f=13&t=45307&sid=865afae345fe83… It looks like my problem may be that when I do a ck-list-sessions the device/terminal information does not seem to be known: Session2: unix-user = '500' realname = '(null)' seat = 'Seat2' session-type = '' active = FALSE x11-display = '' x11-display-device = '' display-device = '' remote-host-name = '' is-local = TRUE on-since = '2014-03-06T17:23:07.718097Z' login-session-id = '4294967295' I have tried disabling selinux, modifying the startwm.sh script included with xrdp to launch the session with "ck-launch-session gnome-session". Neither seem to help. Does anyone have any idea what might be going, or an explanation of how authentication works when one of these apps requires root permission? Thanks! Sam

4 11

ethernet bridge setup
by Jerry Geis 17 Mar '14

17 Mar '14

I have a USB to ethernet device connected to CentOS 6.5 on my laptop. I setup ifcfg-eth0 and added BRIDGE=br0 on eth0 did service network restart, all came up. "seems" to be working. However when I plug an ethernet device into the USB port that is wanting DHCP it is not getting an address. Is there something I missed in the setup? I was expecting the device connected to the USB to be bridged to my same network and be able to get a DHCP address on the same network. Thanks, Jerry

2 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss