Discuss

discuss@lists.centos.org

34758 discussions

default gw route has gone?
by Rob Kampen 16 Jan '14

16 Jan '14

Weird behaviour. A couple of days ago I installed another DSL router. During the process I have somehow caused the default gw route to disappear - on system start up the interface comes up fine, I can see and connect to the local subnet but not to the internet. [rkampen@timsws network-scripts]$ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 link-local * 255.255.0.0 U 1002 0 0 eth0 is what I get at startup. I need to add sudo route add default gw 192.168.1.1 to get things working properly. [rkampen@timsws network-scripts]$ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 link-local * 255.255.0.0 U 1002 0 0 eth0 default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 Google shows me a number of responses that all tell me to add a line to /etc/sysconfig/network which I already had. [rkampen@timsws network-scripts]$ cat /etc/sysconfig/network NETWORKING=yes HOSTNAME=timsws GATEWAY=192.168.1.1 and [rkampen@timsws network-scripts]$ cat /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE="eth0" NM_CONTROLLED="yes" ONBOOT=yes TYPE=Ethernet BOOTPROTO=dhcp DEFROUTE=no IPV4_FAILURE_FATAL=yes IPV6INIT=no NAME="System eth0" UUID=5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03 HWADDR=00:24:8C:80:0B:15 PEERDNS=yes PEERROUTES=yes LAST_CONNECT=1389583930 So what am I missing? BTW - all other devices are working just fine - just my main CentOS 6.5 WS fails. TIA

5 5

NetworkManger trying to start Supplicant
by david 16 Jan '14

16 Jan '14

Folks In Centos 6.5, I am getting the message in the log file every few minutes: NetworkManager: <info> Trying to start the supplicant... There is no wireless on that computer, but there are two NICs, because it is my home gateway. Is there some tweak that can prevent this message? The installation is a relatively new one, so all packages are "up-to-date". David Kurn

2 1

CentOS on this Laptop
by Steve Clark 16 Jan '14

16 Jan '14

Hi List, Just wondering if anyone has tried CentOS on this laptop. HP ENVY 15-j067cl 15.6 Sam's club is selling it for $699 right now. http://www.samsclub.com/sams/hp-15-6-touch-nb-intel-core-i7-4700qm/prod1161… HP ENVY 15-j067cl 15.6" Touchscreen Laptop Computer, Intel Core i7-4700QM, 8GB Memory, 750GB Hard Drive Thanks, -- Stephen Clark *NetWolves* Director of Technology Phone: 813-579-3200 Fax: 813-882-0209 Email: steve.clark(a)netwolves.com http://www.netwolves.com

2 2

odd issue with ipmitool
by m.roth＠5-cent.us 16 Jan '14

16 Jan '14

Got an older server running 6.5. I've been fighting it - I have two webcams for surveillance of the room; one works with motion, but it resizes the picture down Adjusting resolution from 640x480 to 360x296 and the video's dark and bad contrast. So I went back to the camer I'd been using before that worked fine... on CentOS 5.x, and then I remembered why I'd gone to the other camera - the bottom 40% of so of the screen is green - no picture, just green. Doing a *lot* of googling, I saw references to this, and a number of folks suggesting problems with USB messages. Now, I've tried plugging it in both front and back of the server, given the possibility that there was a difference in versions of USB support, but no joy. So this morning, I started wondering if there was something going on, hardware-wise, on the box. Installed OpenIPMI and ipmitools, fired it up, and tried to do a simple ipmitool sel list... and get "unspecified error". Ok, I said to myself, I tried ipmitool sel 1, ditto... but 2 gives me Get SDR 0003 command failed: Unspecified error Get SDR 0005 command failed: Unspecified error Get SDR 0009 command failed: Unspecified error Get SDR 0014 command failed: Unspecified error Get SDR 0017 command failed: Unspecified error and then a record. I tried jumping around - 200 (which I've seen as the limit on other machines), nothing, 150, yes, 156 or so, yes. Not some lower numbers. So, now the question is whether something screwy is going on with the hardware... or if just, for some reason, the SEL is screwed up. Note that ipmitool sdr list works fine.... mark

1 0

CentOS-announce Digest, Vol 107, Issue 9
by centos-announce-request＠centos.org 16 Jan '14

16 Jan '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2014:0026 Critical CentOS 6 java-1.7.0-openjdk Update (Johnny Hughes) 2. CESA-2014:0027 Important CentOS 5 java-1.7.0-openjdk Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 15 Jan 2014 11:04:23 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:0026 Critical CentOS 6 java-1.7.0-openjdk Update To: centos-announce(a)centos.org Message-ID: <20140115110423.GA23069(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:0026 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-0026.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 23a0398eef38be83195eb0fccc24ebe54b3ca51edd350b09fa6a05d256ee63cc java-1.7.0-openjdk-1.7.0.51-2.4.4.1.el6_5.i686.rpm 64371a3e7b476b95f4bfda3f805f237fa431ef21d3e79f786f2ff8e355dfcb82 java-1.7.0-openjdk-demo-1.7.0.51-2.4.4.1.el6_5.i686.rpm bb0c14e74121c9c2ca9a28d0f2f4aae69ca9efc151d484c5d2f064bf7dcf1d18 java-1.7.0-openjdk-devel-1.7.0.51-2.4.4.1.el6_5.i686.rpm f9099825fd1474021c73792e11f06722ae6d2ccaa0fd44bc63bb88624543edde java-1.7.0-openjdk-javadoc-1.7.0.51-2.4.4.1.el6_5.noarch.rpm f7290801eeb6a3b01fe36c973fbaa2131c3ae4dad9d01fc542c9d721b37abb67 java-1.7.0-openjdk-src-1.7.0.51-2.4.4.1.el6_5.i686.rpm x86_64: c4314a7f9938f7beb7d106ecd26844a3d883d91077d4bdeec40ce5e9d086b85e java-1.7.0-openjdk-1.7.0.51-2.4.4.1.el6_5.x86_64.rpm b9d76670ba0dc34bace9c995e6b3dc6c17cc8dade24a862243c2d75d18c0329b java-1.7.0-openjdk-demo-1.7.0.51-2.4.4.1.el6_5.x86_64.rpm 9440abb63aa7a5bb75e61c5a2e58483aeb302a1dbcac50d72290949783830029 java-1.7.0-openjdk-devel-1.7.0.51-2.4.4.1.el6_5.x86_64.rpm f9099825fd1474021c73792e11f06722ae6d2ccaa0fd44bc63bb88624543edde java-1.7.0-openjdk-javadoc-1.7.0.51-2.4.4.1.el6_5.noarch.rpm dac184e8c4d88dbc5da9db40561d08a75f3424b4e9502141a021f3d54e348de5 java-1.7.0-openjdk-src-1.7.0.51-2.4.4.1.el6_5.x86_64.rpm Source: e38afbec2f04dfc0982594724a371805b278a431e0ee9d220f003adda5ef348d java-1.7.0-openjdk-1.7.0.51-2.4.4.1.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 15 Jan 2014 11:16:34 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:0027 Important CentOS 5 java-1.7.0-openjdk Update To: centos-announce(a)centos.org Message-ID: <20140115111634.GA11446(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:0027 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-0027.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 30812d30d8ede7fa1c21174522d59bf12187bd99006475d1fcaf6bb76cf4e8ed java-1.7.0-openjdk-1.7.0.51-2.4.4.1.el5_10.i386.rpm 697b27dabe7ea3d0cc7a7b6ad307ce08c35295064dd09958a5516c5afd3d2afb java-1.7.0-openjdk-demo-1.7.0.51-2.4.4.1.el5_10.i386.rpm b5f7a2a90818e54abde223abf151907d714971dd7fef5d8b19c1c5743b406ffe java-1.7.0-openjdk-devel-1.7.0.51-2.4.4.1.el5_10.i386.rpm 30b3270acfd54ff77e9ad50c76b0eb3443ba97f36b702b5bd8b15fb14cb56d9e java-1.7.0-openjdk-javadoc-1.7.0.51-2.4.4.1.el5_10.i386.rpm 71acfb7f04742a70a0b905cc677d7cf8b72990b03f0a6f9b27298e78820fc897 java-1.7.0-openjdk-src-1.7.0.51-2.4.4.1.el5_10.i386.rpm x86_64: 189f7dd3675dc9fb44e3410deae51340fc05b4ff27379715e8c6f5b9f75776c9 java-1.7.0-openjdk-1.7.0.51-2.4.4.1.el5_10.x86_64.rpm 73336ebf7af849ec5e54335793fc651a2444f6e0b5362bbd21e30f157862c6ae java-1.7.0-openjdk-demo-1.7.0.51-2.4.4.1.el5_10.x86_64.rpm 2e8db52d26a53505cb20eac30147543b9ae6cc6aadd32b2801ff1c6725b56a5f java-1.7.0-openjdk-devel-1.7.0.51-2.4.4.1.el5_10.x86_64.rpm d9cc947dd116121bc0ee7e50780e45f4b7ee64f2eb03960c847801473de221cf java-1.7.0-openjdk-javadoc-1.7.0.51-2.4.4.1.el5_10.x86_64.rpm 0f12680bcb206978475ac6f7b1b724eed7396ec71a04f63ea34177e39e0afdce java-1.7.0-openjdk-src-1.7.0.51-2.4.4.1.el5_10.x86_64.rpm Source: 7c14457f4849035141a63445e25f650aef4c155e525862117c1bad97ba76725f java-1.7.0-openjdk-1.7.0.51-2.4.4.1.el5_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 107, Issue 9 ***********************************************

1 0

Fwd: HA cluster - strange communication between nodes
by Martin Moravcik 16 Jan '14

16 Jan '14

Hi, For a testing purposes I'm trying to create two node HA environment for running some service (openvpn and haproxy). I installed two CentOS 6.4 KVM guests. I was able to create a cluster and some resources. I followed the document https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux… But my cluster behaves not as expected: After start of cluster sw on both nodes, they can see each other. ---------------------------------------- [root@lb1 ~]# pcs status Cluster name: LB.STK Last updated: Mon Jan 13 15:34:21 2014 Last change: Mon Jan 13 15:24:47 2014 via cibadmin on lb1.asol.local Stack: cman Current DC: lb1.asol.local - partition with quorum Version: 1.1.10-14.el6_5.1-368c726 2 Nodes configured 2 Resources configured Online: [ lb1.asol.local lb2.asol.local ] Full list of resources: Resource Group: LB LAN.VIP (ocf::heartbeat:IPaddr2): Started lb2.asol.local WAN.VIP (ocf::heartbeat:IPaddr2): Started lb2.asol.local ---------------------------------------- After manual shutdown of one node 2 (pcs cluster stop), the node 1 doesn't get this information and still believes node 2 is up and running. In the log of corosync @lb2 these lines are repeating: Jan 13 15:38:43 [1712] lb2.asol.local cib: info: crm_client_new: Connecting 0x25a3810 for uid=0 gid=0 pid=10763 id=2b06a195-11f6-452d-992b-5ea0c69be21a Jan 13 15:38:43 [1712] lb2.asol.local cib: info: cib_process_request: Completed cib_query operation for section 'all': OK (rc=0, origin=local/crm_resource/2, version=0.7.4) Jan 13 15:38:43 [1712] lb2.asol.local cib: info: crm_client_destroy: Destroying 0 events Jan 13 17:24:24 corosync [TOTEM ] Retransmit List: 9a 9b 9c The firewall on both nodes is open for incomming traffic from these nodes and stonith-enabled is set to false. I created keys for root user, so I can make ssh back and forth without using password. The pacemaker's version is 1.1.10-14. Do you have any idea, where might be a problem? thanks martin

6 8

Mock and Mock again
by James B. Byrne 15 Jan '14

15 Jan '14

Question: If I use mock to build package rpmA from tarballA but rpmA has a dependency that can only be satisfied by package rpmB which must also be built from tarballB then how does the rpmB built from the tarballB get pulled into mock when building rpmA? I am trying to build httpd-2.4.7 from Apache and that needs apr-devel and apr-util-devel > 1.4. I can build apr and apr-utils in mock but I cannot find clear instructions on how to get the custom built rpms into the mock build for httpd. I presume that the procedure it is so simple that nobody thinks it necessary to write it out but I cannot figure it out on my own. Do I just build the things in order and leave them in the mock root for the subsequent httpd build to find? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3 -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 1

Re: [CentOS] A question about 7
by m.roth＠5-cent.us 15 Jan '14

15 Jan '14

Warren Young wrote: > On 1/13/2014 07:33, m.roth(a)5-cent.us wrote: <snip> >> Reason for this: at one of my local sf clubs, I've been trying to install Evergreen, F/OSS library software, on a system, and it's a nightmare. >> They seem to have been building it for Ubuntu whateverthelatestanimalis. The >> biggest problem is, IIRC, eventhandler and memchached; oh, and it uses postgresql 9, and nothing else. PGSQL 9 was not a big deal to install, but the other stuff.... Even trying to build it in /usr/local is a royal mess:though I've got the dbi installed, ./configure can't find it. > > Post an actual error message, and someone may be able to help. That's not a problem, well, the issue, as I said, is that configure can't find the interface, even when I've given it the correct paths. Can't really just give it to you, since a) I'm at work, in the DC 'burbs, and b) the clubhouse is up in Baltimore. Not building it at home - I've got other things to build (like xtrackcad).... Thanks for the offer, though. I'm sure there's either some environment variable it isn't happy with, or is missing, or an option isn't right to tell it what path to use. mark

14 30

Advice in Time Sync
by Ku Wei Xiong 15 Jan '14

15 Jan '14

Dear all, I would need some advice as I am a beginner in CentOS. The question is as follows: How to set up timing if NTP was block by ISP? I have try many way such as link the timezone , getting from the hardware clock.However , it is not the solution. Please advice. -- Regards, Ku Wei Xiong 0166365831

8 8

Re: [CentOS] A question about 7
by Les Mikesell 15 Jan '14

15 Jan '14

On Wed, Jan 15, 2014 at 6:05 AM, Steve Clark <sclark(a)netwolves.com> wrote: > On 01/14/2014 08:34 PM, Les Mikesell wrote: > > On Tue, Jan 14, 2014 at 7:17 PM, Warren Young <warren(a)etr-usa.com> wrote: > > I don't know about "less consistent", but I always considered it a > feature in Linux vs the BSDs or big iron Unix that I could always count > on the first network interface being "eth0". > > What does 'first' mean? And the same one isn't consistently first. > > I get that network interfaces can move around on you, but I thought that > was why they started putting the MAC address in the ifcfg-eth? scripts. > What problem did that not solve, that we had to switch to this new system? > > The problem is when you clone a disk and ship it to a location with > 'hands-on' support that doesn't know linux to install in a new chassis > that will arrive there at the same time. Somehow you have to get > someone to put the 4 network cables in the right NICs before anything > can connect. With things tied to MAC addresses that you don't know > ahead of time, nothing will work. > > Now I have to remember which *PCI slot* my Ethernet card is in when I > run "ifconfig" unless I want to dig through the full listing. > > Yes, but that's something you _can_ know. > > How can you know it? And if you know which port is which why isn't in the > instruction > with the drive so the people on site know which port is which? If you insert the card yourself, you obviously know the slot. And you can tell the position from the back just by looking at it. But Centos6 will detect in random order, so knowing the name on one box doesn't help with another. We have to go through contortions plugging on cable in at a time, doing an 'ifconfig up' and checking which interface shows link up. And the people doing that part wish we used more windows instead of Linux. -- Les Mikesell lesmikesell(a)gmail.com

4 6

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss