Discuss

discuss@lists.centos.org

34758 discussions

3TB disk with 6.0.4 not booting
by Wes James 07 Nov '13

07 Nov '13

As you know I've been testing centos on an old mac pro. I have 1 disk left of 4 that I'm testing on. I had a 3TB disk and stuck it in and couldn't get centos to boot off of it. It would install, but not boot. I then got "old" disk 4 installed with it. Any idea why the 3TB disk doesn't work? I pulled out an os x 10.6.3 and that would install and boot. I resized the disk in osx and reinstalled centos, but centos still won't boot off the 3TB disk. Thanks, -wes

6 7

Workaround for (EL6.4) rdesktop-1.6.0-10 Woe
by Cal Webster 07 Nov '13

07 Nov '13

rdesktop has been spewing error messages since the update to CentOS 6.4. Aside from the continuous stream of errors in the terminal window from which it was launched, there are a number of usability issues in the remote session. The pointer does not change shape when moving over various window components such as column separators, window borders, etc. The background doesn't refresh within scroll bars, making it difficult to tell where the scroll handle is. We've also found that MS Visio will crash and hang the remote system if run within rdesktop. Other strange phenomenon are also manifest in various applications. In short, rdesktop 1.6.0-10 is buggy and unstable. See this upstream bug report for more: Bug 914279 - regression in 1.6.0-10.el6: Mousepointer and selections not drawn properly https://bugzilla.redhat.com/show_bug.cgi?id=914279 We've been putting up with it, hoping that an update would be published upstream. Even though this issue is affecting customers upstream, as evidenced in the bugzilla report, a bug-fix update doesn't appear to be imminent. I decided to rebuild the Fedora 19 SRPM on CentOS to resolve the issue. It appears from the bugzilla remarks that others have done this trivially. With a few simple precautions, we've done just that. I'm sharing our work-around in the hope that it will benefit others in similar circumstances. This process assumes you have a build machine properly setup with an rpmbuild environment. If you don't, see this article: Set Up an RPM Build Environment under CentOS http://wiki.centos.org/HowTos/SetupRpmBuildEnvironment Note: Watch for line-wrap below. Best Regards, --Cal Webster =============[Rdesktop Workaround]============= ##>> Retrieve and install the CentOS source RPM: rpm -iv http://vault.centos.org/6.4/os/Source/SPackages/rdesktop-1.6.0-10.el6.src.r… ##>> Set aside the sources: [iseo@jato ~]$ cd rpmbuild/SOURCES/ [iseo@jato SOURCES]$ mkdir rdesktop-1.6.0-10 [iseo@jato SOURCES]$ mv *.patch rdesktop-1.6.0.tar.gz rdesktop-1.6.0-10/ ##>> Rename the CentOS spec file: [iseo@jato SOURCES]$ cd ../SPECS/ [iseo@jato SPECS]$ mv rdesktop.spec rdesktop.spec.centos ##>> Retrieve and install the Fedora source RPM from your favorite mirror: (watch for line-wrap in URL) rpm -iv http://mirror.linux.duke.edu/pub/fedora/linux/releases/19/Everything/source… ##>> Rename the Fedora spec file then use the CentOS spec file: [iseo@jato SPECS]$ mv rdesktop.spec rdesktop.spec.fc19 [iseo@jato SPECS]$ cp rdesktop.spec.centos rdesktop.spec ##>> Edit the CentOS spec file: Change version and release to reflect FC19 package Add version suffix to designate local RPM Remove original CentOS patch references and replace with those from FC19 Add comments in change log [iseo@jato SPECS]$ vi rdesktop.spec ----------------------------------- Version: 1.7.1 Release: 2%{?dist}.1.iseo ... Patch0: %{name}-libao.patch ... %prep %setup -q %patch0 -p1 -b .ao ... %changelog * Fri Nov 1 2013 Cal Webster <cwebster(a)bizec.rr.com> 1.7.1-2 - Latest version not available upstream - This version from FC19 - Fixes regression errors (NOT IMPLEMENTED RDP5 opcodes, get cursor, etc) - Fixes mouse cursor not changing and background showing through - Fixes freeze on remote system - See https://bugzilla.redhat.com/show_bug.cgi?id=914279 ----------------------------------- ##>> You might need to install pcsc-lite-devel if you get a build dependency error. It's not installed by default. [root@jato ~]# yum install pcsc-lite-devel ... Installed: pcsc-lite-devel.x86_64 0:1.5.2-13.el6_4 Complete! [root@jato ~]# ##>> You will also need to modify /usr/include/ao/ao.h to overcome this build error: ------------------------------------------------------ [iseo@jato rpmbuild]$ rpmbuild -ba --sign --clean SPECS/rdesktop.spec ... gcc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -Wall -I/usr/include -pthread -I/usr/include/PCSC -DPACKAGE_NAME= \"rdesktop\" -DPACKAGE_TARNAME=\"rdesktop\" -DPACKAGE_VERSION=\"1.7.1\" -DPACKAGE_STRING=\"rdesktop\ 1.7.1\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DL_ENDIAN=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_LOCALE_H=1 -DHAVE_LANGINFO_H=1 -DHAVE_SYSEXITS_H=1 -Dssldir= \"/usr\" -DHAVE_XRANDR=1 -DWITH_SCARD=1 -DEGD_SOCKET=\"/var/run/egd-pool \" -DWITH_RDPSND=1 -DRDPSND_LIBAO=1 -DHAVE_DIRENT_H=1 -DHAVE_DIRFD=1 -DHAVE_DECL_DIRFD=1 -DHAVE_ICONV_H=1 -DHAVE_ICONV=1 -DICONV_CONST= -DHAVE_SYS_VFS_H=1 -DHAVE_SYS_STATVFS_H=1 -DHAVE_SYS_STATFS_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_SYS_MOUNT_H=1 -DSTAT_STATVFS=1 -DHAVE_STRUCT_STATVFS_F_NAMEMAX=1 -DHAVE_STRUCT_STATFS_F_NAMELEN=1 -DHAVE_MNTENT_H=1 -DHAVE_SETMNTENT=1 -DIPv6=1 -DKEYMAP_PATH= \"/usr/share/rdesktop/keymaps/\" -o orders.o -c orders.c rdpsnd_libao.c: In function 'libao_open': rdpsnd_libao.c:78: error: 'ao_sample_format' has no member named 'matrix' rdpsnd_libao.c: In function 'libao_set_format': rdpsnd_libao.c:117: error: 'ao_sample_format' has no member named 'matrix' make: *** [rdpsnd_libao.o] Error 1 make: *** Waiting for unfinished jobs.... error: Bad exit status from /var/tmp/rpm-tmp.wkIC6X (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.wkIC6X (%build) [iseo@jato rpmbuild]$ ------------------------------------------------------ ##>> Make a backup copy of ao.h: cp /usr/include/ao/ao.h /usr/include/ao/ao.h.orig ##>> Open ao.h in vi editor and search for the ao_sample_format type definition. Then add the "matrix" line at the bottom. vi /usr/include/ao/ao.h ----------------------- typedef struct ao_sample_format { int bits; /* bits per sample */ int rate; /* samples per second (in a single channel) */ int channels; /* number of audio channels */ int byte_format; /* Byte ordering in sample, see constants below */ char *matrix; /* channel input matrix */ } ao_sample_format; ----------------------- ##>> Make a copy of the modified ao.h in case it gets overwritten later: cp /usr/include/ao/ao.h /usr/include/ao/ao.h.withMatrix ##>> The build should now complete without incident: ---------------------------------------------------- [iseo@jato rpmbuild]$ rpmbuild -ba --sign --clean SPECS/rdesktop.spec ... Generating signature: 1005 Wrote: /home/iseo/rpmbuild/SRPMS/rdesktop-1.7.1-2.el6.1.iseo.src.rpm Generating signature: 1005 Wrote: /home/iseo/rpmbuild/RPMS/x86_64/rdesktop-1.7.1-2.el6.1.iseo.x86_64.rpm Generating signature: 1005 Wrote: /home/iseo/rpmbuild/RPMS/x86_64/rdesktop-debuginfo-1.7.1-2.el6.1.iseo.x86_64.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.JeWQeP + umask 022 + cd /home/iseo/rpmbuild/BUILD + cd rdesktop-1.7.1 + rm -rf /home/iseo/rpmbuild/BUILDROOT/rdesktop-1.7.1-2.el6.1.iseo.x86_64 + exit 0 Executing(--clean): /bin/sh -e /var/tmp/rpm-tmp.wRDJyS + umask 022 + cd /home/iseo/rpmbuild/BUILD + rm -rf rdesktop-1.7.1 + exit 0 [iseo@jato rpmbuild]$ ---------------------------------------------------- Your install RPM is in ~/rpmbuild/RPMS/{i386,x86_64}/ You can now copy the RPM to any CentOS 6.4 machine of the same architecture and update rdesktop. yum localupdate rdesktop-1.7.1-2.el6.1.iseo.x86_64.rpm -or- If you maintain a local, custom repo like we do just copy the rpm there and update your repo metadata so it'll be installed during the next update cycle. [root@pegasus ~]# yum list rdesktop Loaded plugins: downloadonly, fastestmirror, priorities, refresh-packagekit, : security Loading mirror speeds from cached hostfile * base: ftpserver 56 packages excluded due to repository priority protections Installed Packages rdesktop.i686 1.6.0-10.el6 @base Available Packages rdesktop.i686 1.7.1-2.el6.1.iseo localupdates [root@pegasus ~]# =============[/Rdesktop Workaround]=============

3 6

echo 0> /selinux/enforce
by Wes James 07 Nov '13

07 Nov '13

When does echo 0 > /selinux/inforce need to be used? I.e., where is selinux enforcing itself on the system to protect it? When I do yum install of some package, it seems to work (not being blocked). When would doing something not work because selinux is watching it (or whatever that process is doing)? Thanks, -wes

7 17

CentOS-announce Digest, Vol 105, Issue 5
by centos-announce-request＠centos.org 07 Nov '13

07 Nov '13

1 0

Running MacOSX as VM under CentOS 5.10?
by Robert Heller 07 Nov '13

07 Nov '13

Is it even remotely possible to run MacOSX (or Darwin) as VM under CentOS 5.10 / xen? Or am I better off not even trying and just getting a MacMini or MacBook to just jack into my LAN? I just need a 'build box' and possibly something to do light testing (eg does the program run? Does the GUI come up?). I don't really have the *physical* room for an iMac, unless the screen is tiny. I can cross-build for MS-Windows using mgwin32 and I have VMs for CentOS 6, Fedora, Ubuntu, Debian, etc. Only MacOSX is missing from the 'mix'. -- Robert Heller -- 978-544-6933 / heller(a)deepsoft.com Deepwoods Software -- http://www.deepsoft.com/ () ascii ribbon campaign -- against html e-mail /\ www.asciiribbon.org -- against proprietary attachments

6 6

syslog-ng or rsyslog?
by Rafał Radecki 06 Nov '13

06 Nov '13

Hi All. I've used syslog-ng for some time. I like it. I have a project in which I need to choose a central logging solution. What are your experiences with rsyslog? Is it more complex to setup than syslog-ng? Or maybe does it have some additional features? I am also thinking about using some gui tools for log parsing and graphing. May be proprietary/paid. Any suggestions? Best regards, Rafal.

4 3

Re: [CentOS] [OT] Building a new backup server
by m.roth＠5-cent.us 06 Nov '13

06 Nov '13

Hey, Les, Thanks for changing the subject to OT. Les Mikesell wrote: > On Tue, Nov 5, 2013 at 1:28 PM, <m.roth(a)5-cent.us> wrote: >> >> As I noted, we make sure rsync uses hard links... but we have a good number of individual people and projects with who *each* have a good number of terabytes of data and generated data. Some of our 2TB drives are >> over 90% full, and then there's the honkin' huge RAID, and at least one 14TB partition is over 9TB full.... > > If you have database dumps or big text files that aren't compressed, backuppc could be a big win. I think it is the only thing that can keep a compressed copy on the server side and work directly with a stock rsync and uncompressed files on the target hosts (and it can cache the block-checksums so it doesn't have to uncompress and > recompute them every run). While it is 'just a perl script' it's not quite what you expect from simple scripting... We have a *bunch* of d/bs. Oracle. MySQL. Postgresql. All with about a week's dumps from every night, and then backups of them to the b/u servers. I can't imagine how they'd be a win - don't remember just off the top of my head if they're compressed or not. A *lot* of our data is not huge text files - lots and lots of pure datafiles, output from things like Matlab, R, and some local programs, like the one for modeling protein folding. mark

4 11

Provide access to /home folder
by Gopu Krishnan 06 Nov '13

06 Nov '13

I have a CentOS linux web server in which I have multiple web sites. I have many website programmers now doing the coding for all the sites. How can I provide a key-based authentication for the programmers in such a way that they have access only to /home folder ? They should be able to access only all the files inside /home and able to modify it. This is cPanel server in which all the sites comes under /home directory. Currently they are using separate passwords for every site. If I could give access to my developer inside /home folder, they would be able to do edit all the sites easily rather than having separate password for each site (eg : /home/site1 or /home/site2). Please share your ideas on the same. Thanks,

6 9

Re: [CentOS] [OT] Building a new backup server
by m.roth＠5-cent.us 06 Nov '13

06 Nov '13

Sorin Srbu wrote: > Guys, > > I was thrown a cheap OEM-server with a 120 GB SSD and 10 x 4 TB SATA-disks for the data-backup to build a backup server. It's built around an Asus Z87-A > that seems to have problems with anything Linux unfortunately. > > Anyway, BackupPC is my preferred backup-solution, so I went ahead to install another favourite, CentOS 6.4 - and failed. > > The raid controller is a Highpoint RocketRAID 2740 and its driver is suggested to be prior to starting Anaconda by way of "ctrl-alt-f2", at which point > Anaconda freezes. > > I've come so far as installing Fedora 19 and having it see all the hard-drives, but it refuses to create any partition bigger than approx. 16 TB with ext4. > > I've never had to deal with this big raid-arrays before and am a bit stumped. > > Any hints as to where to start reading up, as well as hints on how to proceed (another motherboard, ditto raidcontroller?), would be greatly appreciated. Several. First, see if you CentOS supports that card. The alternative is to go to Highpoint's website, and look for the driver. You *might* need to get the source and build it - I had to do that a few months ago, on an old 2260 (I think it is) card, and had to hack the source -they're *not* good about updates. If you're lucky, they'll have a current driver or source. Second, on our HBR's (that's a technical term - Honkin' Big RAIDS... <g>), we use ext4, and RAID 6. Also, for about two years, I keep finding things that say that although ext4 supports gigantic filesystems, the tools aren't there yet. The upshot is that I make several volumes and partition them into 14TB-16TB filesystems. Besides, if you have a problem with a truly humongous RAID, the rebuild will finish sometime around next summer.... mark

7 36

CentOS-announce Digest, Vol 105, Issue 4
by centos-announce-request＠centos.org 06 Nov '13

06 Nov '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2013:1505 Important CentOS 5 java-1.6.0-openjdk Update (Johnny Hughes) 2. CEBA-2013:1504 CentOS 6 lvm2 Update (Johnny Hughes) 3. CEBA-2013:1502 CentOS 6 e2fsprogs Update (Johnny Hughes) 4. CESA-2013:1505 Important CentOS 6 java-1.6.0-openjdk Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 5 Nov 2013 20:45:16 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1505 Important CentOS 5 java-1.6.0-openjdk Update To: centos-announce(a)centos.org Message-ID: <20131105204516.GA27067(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1505 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1505.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: dd169ca8d385654007cae4e860cdd298cfc315db65f727aa6c1380d2bca1b123 java-1.6.0-openjdk-1.6.0.0-1.42.1.11.14.el5_10.i386.rpm a4b71822114fd37c6c6daa6d12d3eea9e9b7f1dd24fbe550897de59783d8320e java-1.6.0-openjdk-demo-1.6.0.0-1.42.1.11.14.el5_10.i386.rpm 25629c0881b4abf619e8f36f4c4f445d15a7710ee38c27d24aa2dc8c3fd9e616 java-1.6.0-openjdk-devel-1.6.0.0-1.42.1.11.14.el5_10.i386.rpm 7efd5cffb1c1168654066aff95b2710dd2451970a1e7354e30be1b909c63c5e6 java-1.6.0-openjdk-javadoc-1.6.0.0-1.42.1.11.14.el5_10.i386.rpm 71c6a01a454b9352d68709e9f9031f9eef145420fd60051a66f6b7281cace20d java-1.6.0-openjdk-src-1.6.0.0-1.42.1.11.14.el5_10.i386.rpm x86_64: 39edace146e4b2bbbacfe5e148f443b7d8511bd8842871433225aa0d49da06d9 java-1.6.0-openjdk-1.6.0.0-1.42.1.11.14.el5_10.x86_64.rpm 63941c45f78969dbea729453bab8ad9adbf2c1349ae4fd98097b29ac4ab69ad0 java-1.6.0-openjdk-demo-1.6.0.0-1.42.1.11.14.el5_10.x86_64.rpm cb205722eb289ddd233ec60bf693f0a6c32286cfbba68ebc3fea1d54bc362c5b java-1.6.0-openjdk-devel-1.6.0.0-1.42.1.11.14.el5_10.x86_64.rpm 44067d0bca757f767d3c48382f93590a314533afa69b90f66cf4b64ecd421578 java-1.6.0-openjdk-javadoc-1.6.0.0-1.42.1.11.14.el5_10.x86_64.rpm 56a1fc2fcc56e461be17a201e7c288d25f5672909ef3c47e195feb8634981c1a java-1.6.0-openjdk-src-1.6.0.0-1.42.1.11.14.el5_10.x86_64.rpm Source: 86b2a469dbe6da765da0444cf1b21f4048bf6543fd92813cf6ce8c34f545e3c6 java-1.6.0-openjdk-1.6.0.0-1.42.1.11.14.el5_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Tue, 5 Nov 2013 21:40:57 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1504 CentOS 6 lvm2 Update To: centos-announce(a)centos.org Message-ID: <20131105214057.GA37920(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1504 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1504.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: afb10969863e5be9dc2e12d3d572b3e30e8db05d2fe2cce77b21378309497033 cmirror-2.02.98-9.el6_4.3.i686.rpm f3fcebc12a257b9d62ec8f0dd1d7f312e82166a714c60433488f64dc6ec34c12 device-mapper-1.02.77-9.el6_4.3.i686.rpm 9333086c9884b188f8f7500691a92f8d4403c6c61e81997c4789d988aa643ac2 device-mapper-devel-1.02.77-9.el6_4.3.i686.rpm 0cb5c88b3293cf7ebd3734c8840c84ee0f5af46ef7bda1a27ffe9e26943a7964 device-mapper-event-1.02.77-9.el6_4.3.i686.rpm 05a20b870da7917f87dc96c2e78581f6172cf21b07ab8c0a8a93c580a5b1e2c9 device-mapper-event-devel-1.02.77-9.el6_4.3.i686.rpm 66b622c8613c894029bfbd91dfdcb9c6c4b73cd9ac34c51080c0236c748a3c83 device-mapper-event-libs-1.02.77-9.el6_4.3.i686.rpm e7d9e006dec02f85c6e96a43243e5faa576dfd1681ab3a85773e5fa9969c35df device-mapper-libs-1.02.77-9.el6_4.3.i686.rpm d4892fb65734d69db76cbdc068f020cd7d57a7a6c6ecd830ad6ac459dfafff56 lvm2-2.02.98-9.el6_4.3.i686.rpm 797cd30c09e767f1d0ee6cdb619614e69b256e297cdf55462f44dedb73c5ae03 lvm2-cluster-2.02.98-9.el6_4.3.i686.rpm ca4ba74f3845022f12860ed5eba23d0323cd0b8407a969fa3ea857ff4cd418a1 lvm2-devel-2.02.98-9.el6_4.3.i686.rpm 9bacf9832b22c36c34c4b92ed3c4d49f7d3b2766914ac0ac9b12d4bb7515425c lvm2-libs-2.02.98-9.el6_4.3.i686.rpm x86_64: d4e1f0a6e46ac7e86f6624f15ad4271ce51be7eb40d35fc36592525e246cdaf6 cmirror-2.02.98-9.el6_4.3.x86_64.rpm 657a64406e6d2726e24c9c097720945a02934d190739402f941d6d825d7b8f4d device-mapper-1.02.77-9.el6_4.3.x86_64.rpm 9333086c9884b188f8f7500691a92f8d4403c6c61e81997c4789d988aa643ac2 device-mapper-devel-1.02.77-9.el6_4.3.i686.rpm d0adb6d829ecae82d58dd6edd95fe8aed41fb1e7cadfb53f615cde0f959f36b0 device-mapper-devel-1.02.77-9.el6_4.3.x86_64.rpm e88a36adbf1eaf2840efc0b618cd6efc20a8e28b6da9feb2da1407db714179d0 device-mapper-event-1.02.77-9.el6_4.3.x86_64.rpm 05a20b870da7917f87dc96c2e78581f6172cf21b07ab8c0a8a93c580a5b1e2c9 device-mapper-event-devel-1.02.77-9.el6_4.3.i686.rpm 1dd4869314116e2e078abfc825b87cc50cd4d4d0a63ebdc5676fca792b9b0e60 device-mapper-event-devel-1.02.77-9.el6_4.3.x86_64.rpm 66b622c8613c894029bfbd91dfdcb9c6c4b73cd9ac34c51080c0236c748a3c83 device-mapper-event-libs-1.02.77-9.el6_4.3.i686.rpm 4db96cc287fbb652572955a5cef45f2a2fca9418a88cc0a9bec3a76691cf8c88 device-mapper-event-libs-1.02.77-9.el6_4.3.x86_64.rpm e7d9e006dec02f85c6e96a43243e5faa576dfd1681ab3a85773e5fa9969c35df device-mapper-libs-1.02.77-9.el6_4.3.i686.rpm de142a79204011255d35ce3031d4e6325a64776cbf369d4c9ad8d2fc1d7710ff device-mapper-libs-1.02.77-9.el6_4.3.x86_64.rpm 8fa97478975c6f3f3afc461bef2274c1ac6273c991d34c0cc023ef765d9be1ea lvm2-2.02.98-9.el6_4.3.x86_64.rpm bc6744f858cf6607a6efb4b3cbd985f07bdd676d9147e9e956ca08ef565b7311 lvm2-cluster-2.02.98-9.el6_4.3.x86_64.rpm ca4ba74f3845022f12860ed5eba23d0323cd0b8407a969fa3ea857ff4cd418a1 lvm2-devel-2.02.98-9.el6_4.3.i686.rpm 3e07834f92a6785bc4f1b8ac5e5709e6336b6b24eb03c42c88a906ad1b314874 lvm2-devel-2.02.98-9.el6_4.3.x86_64.rpm 9bacf9832b22c36c34c4b92ed3c4d49f7d3b2766914ac0ac9b12d4bb7515425c lvm2-libs-2.02.98-9.el6_4.3.i686.rpm b676643d3f10a1513b5a87ccaad8bdd3cc72f7df38c52707158af9d386ebe05a lvm2-libs-2.02.98-9.el6_4.3.x86_64.rpm Source: d831861cb6943b5e04c2ecde9e286614aeff471e199f7f33723c4ce188ba893f lvm2-2.02.98-9.el6_4.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Tue, 5 Nov 2013 21:41:19 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1502 CentOS 6 e2fsprogs Update To: centos-announce(a)centos.org Message-ID: <20131105214119.GA38053(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1502 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1502.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 2e985c764113c3864a6e8da89939b40c4e21d7e90b50da8008f16bdda1a46105 e2fsprogs-1.41.12-14.el6_4.4.i686.rpm 7b91e6b1a014ab0db9ac309662ac7e47ef4685ac7ed350f8a1915324658125d5 e2fsprogs-devel-1.41.12-14.el6_4.4.i686.rpm 1f0c281760a4e0586d54ae1bfa160e23e77d96352f6024cbcd3cbf8765fa8a07 e2fsprogs-libs-1.41.12-14.el6_4.4.i686.rpm 24c327fea89ae753a345d985a2af1ede933a289c6fcca698ac943e4ba85f5bfd libcom_err-1.41.12-14.el6_4.4.i686.rpm e451aff77e22c6c7fad3b3c054e30b98c08c03a12d49e5d6959f9a33562516bf libcom_err-devel-1.41.12-14.el6_4.4.i686.rpm 018aa0194f392b02b670d18e451a3d61974cfee93e0ae5d1e52b3cf7792a9bf9 libss-1.41.12-14.el6_4.4.i686.rpm 989e905e80f950194b9cdc1671af7106a6005e04099029d538caf4603f64eea6 libss-devel-1.41.12-14.el6_4.4.i686.rpm x86_64: c1193c93f40b444f4299284cf5e040cea3aff3366dd5007877d385f9fe1e36cb e2fsprogs-1.41.12-14.el6_4.4.x86_64.rpm 7b91e6b1a014ab0db9ac309662ac7e47ef4685ac7ed350f8a1915324658125d5 e2fsprogs-devel-1.41.12-14.el6_4.4.i686.rpm b5f9893ca579d529672ac2506f26bfdf4d6d005d4c65f36f10baa17a2d58cb6a e2fsprogs-devel-1.41.12-14.el6_4.4.x86_64.rpm 1f0c281760a4e0586d54ae1bfa160e23e77d96352f6024cbcd3cbf8765fa8a07 e2fsprogs-libs-1.41.12-14.el6_4.4.i686.rpm 96ac105b3fd87d4dc0944083898b54d1a5768bbc6de78b0015552f9f776c645c e2fsprogs-libs-1.41.12-14.el6_4.4.x86_64.rpm 24c327fea89ae753a345d985a2af1ede933a289c6fcca698ac943e4ba85f5bfd libcom_err-1.41.12-14.el6_4.4.i686.rpm 95ea5f8fbc3ebe7cb1edb0f96f55609943d706136a39aacd11703f80a30e4324 libcom_err-1.41.12-14.el6_4.4.x86_64.rpm e451aff77e22c6c7fad3b3c054e30b98c08c03a12d49e5d6959f9a33562516bf libcom_err-devel-1.41.12-14.el6_4.4.i686.rpm 704e4197883ec6c7fbc7c07eace5cb9abfdf78ad58f2c941426a1910334cb48e libcom_err-devel-1.41.12-14.el6_4.4.x86_64.rpm 018aa0194f392b02b670d18e451a3d61974cfee93e0ae5d1e52b3cf7792a9bf9 libss-1.41.12-14.el6_4.4.i686.rpm add0da2e80f0c3849719a83a86a5565f3406d7071b0fe7b61933d82de3c08895 libss-1.41.12-14.el6_4.4.x86_64.rpm 989e905e80f950194b9cdc1671af7106a6005e04099029d538caf4603f64eea6 libss-devel-1.41.12-14.el6_4.4.i686.rpm 33dfc9904ad3b7d18a3d7f81ea56f6ba58d4575e7e7fec92b8d67cf253b70965 libss-devel-1.41.12-14.el6_4.4.x86_64.rpm Source: e76a30acfe69557020dee6119e8a3cfb17999131e3df3d516f334948aed8f700 e2fsprogs-1.41.12-14.el6_4.4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Tue, 5 Nov 2013 21:41:40 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:1505 Important CentOS 6 java-1.6.0-openjdk Update To: centos-announce(a)centos.org Message-ID: <20131105214140.GA38166(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1505 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1505.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 11734d052a16bfaab1b98c03458e0b1a83f9dbcf1c6aaedad6f212cb6458ec20 java-1.6.0-openjdk-1.6.0.0-1.65.1.11.14.el6_4.i686.rpm b106eb987e683a099ac16bdb1a6579e75b7eb7c52cc02c7cb9f94cdfbba3212b java-1.6.0-openjdk-demo-1.6.0.0-1.65.1.11.14.el6_4.i686.rpm 5f888eb576d1b15e47ff30f2918b3fa3f8b5577f41fb5a8391bb8417e519b7d7 java-1.6.0-openjdk-devel-1.6.0.0-1.65.1.11.14.el6_4.i686.rpm 588afe9ff72a004c506c8732d802ce4145ca7f8ebbab8c24b57295858510a92c java-1.6.0-openjdk-javadoc-1.6.0.0-1.65.1.11.14.el6_4.i686.rpm 95966320da3423eec4b370ef046c59d62beb5527bce6e71edc9b7e8b1bbfae12 java-1.6.0-openjdk-src-1.6.0.0-1.65.1.11.14.el6_4.i686.rpm x86_64: 504433cff9bb1720eb16ae2a02b75327dd7f8a445c302a963b4e4a70165312f6 java-1.6.0-openjdk-1.6.0.0-1.65.1.11.14.el6_4.x86_64.rpm f97c9909c18ae5c144a0689d0b8499cc05a7f5a1384e48e3773f0d874b489911 java-1.6.0-openjdk-demo-1.6.0.0-1.65.1.11.14.el6_4.x86_64.rpm 2d73d7cb54635bf1332de5da46e731ae69c1e70bce2f5d7f58397e04b024a4b7 java-1.6.0-openjdk-devel-1.6.0.0-1.65.1.11.14.el6_4.x86_64.rpm 4c98737fc8ef9dc7e96f8d980bd72c72f19ae31c6081fa11a404042778461fc5 java-1.6.0-openjdk-javadoc-1.6.0.0-1.65.1.11.14.el6_4.x86_64.rpm c529ce8d81427d3b1d60d3b27d829ea6f6f4bc2678e335416887702a7edb2ae3 java-1.6.0-openjdk-src-1.6.0.0-1.65.1.11.14.el6_4.x86_64.rpm Source: 9d916f361bddbfc4a948e0ffe035feabfe6c1c7be531bf22c14d211651826182 java-1.6.0-openjdk-1.6.0.0-1.65.1.11.14.el6_4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 105, Issue 4 ***********************************************

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss