Discuss

discuss@lists.centos.org

34758 discussions

remote sudo script
by Tim Dunphy 08 Oct '13

08 Oct '13

Hey guys, I'm trying to write a simple bash script that will cp a configuration file to a backup (with the date) remotely to a bunch of machines, using sudo with ssh. I notice that if I run the commands individually, they both work (albeit with some strange output I'd like to suppress): [tdunphy@MIAGRBISSH01V ~]$ ssh -q -t -t -t MIAGRBIORCA00V sudo -S 'cp -v /data/solr-4.3.1/zoe/etc/logback.xml /tmp/logback.xml-${i}-$(date +%Y%m%d).bak' <<EOF > secret_sauce > EOF tcgetattr: Inappropriate ioctl for device `/data/solr-4.3.1/zoe/etc/logback.xml' -> `/tmp/logback.xml--20131007.bak' [tdunphy@MIAGRBISSH01V ~]$ ssh -q -t -t -t MIAGRBIORCA00V sudo -S 'ls -l /home/tdunphy/logback.xml-${i}-$(date +%Y%m%d).bak' <<EOF > secret_sauce > EOF tcgetattr: Inappropriate ioctl for device -rw-r--r-- 1 root root 3372 Oct 7 22:07 /home/tdunphy/logback.xml--20131007.bak The best part of the above is that I am passing my password (secret_sauce - not my real one for obvious reasons) to sudo and having the command executed. One thing I'd like to be able to figure out is how to suppress this message, which is a little distracting and useless to the process: tcgetattr: Inappropriate ioctl for device But more importantly, when I try to pop the above two working statements from the command line into a script, the following occurs: [tdunphy@MIAGRBISSH01V ~]$ for i in MIAGRBIORCA0{0..9}V MIAGRBIORCA1{0..2}V > > do > > ssh -q -t -t -t $i sudo -S 'cp -v /data/solr-4.3.1/zoe/etc/logback.xml /tmp/logback.xml-${i}-$(date +%Y%m%d).bak' <<EOF > secret_sauce > EOF > > ssh -q -t -t -t $i sudo -S 'ls -l /home/tdunphy/logback.xml-${i}-$(date +%Y%m%d).bak' <<EOF > secret_sauce > EOF > > done tcgetattr: Inappropriate ioctl for device `/data/solr-4.3.1/zoe/etc/logback.xml' -> `/tmp/logback.xml--20131007.bak' tcgetattr: Inappropriate ioctl for device -rw-r--r-- 1 root root 3372 Oct 7 22:07 /home/tdunphy/logback.xml--20131007.bak tcgetattr: Inappropriate ioctl for device [sudo] password for tdunphy: For some reason the <<EOF password EOF routine is not working to provide the password to sudo the way I was able to when running the commands individually. Any thoughts on how I should be going about this? Thanks, Tim -- GPG me!! gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B

6 7

CentOS 6.4: Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments.
by Trevor T Kates (Services - 6) 08 Oct '13

08 Oct '13

All: ~> uname -srvmpio Linux 2.6.32-358.18.1.el6.x86_64 #1 SMP Wed Aug 28 17:19:38 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux ~> rpm -qa kernel\* | sort kernel-2.6.32-358.18.1.el6.x86_64 kernel-2.6.32-358.el6.x86_64 kernel-devel-2.6.32-358.18.1.el6.x86_64 kernel-devel-2.6.32-358.el6.x86_64 kernel-firmware-2.6.32-358.18.1.el6.noarch kernel-headers-2.6.32-358.18.1.el6.x86_64 My department has several dozen servers using CentOS 6.4 connected to a HP P2000 G3 FC SAN via a Brocade switch. device-mapper-multipath is used to handle the multiple paths to the SAN storage. Our setup has two paths per two redundant controllers/switches. ~> rpm -qa device-mapper\* | sort device-mapper-1.02.77-9.el6.x86_64 device-mapper-event-1.02.77-9.el6.x86_64 device-mapper-event-libs-1.02.77-9.el6.x86_64 device-mapper-libs-1.02.77-9.el6.x86_64 device-mapper-multipath-0.4.9-64.el6_4.2.x86_64 device-mapper-multipath-libs-0.4.9-64.el6_4.2.x86_64 device-mapper-persistent-data-0.1.4-1.el6.x86_64 ~> sudo cat /etc/multipath.conf multipaths { multipath { wwid <redacted> alias <redacted> } } defaults { find_multipaths yes user_friendly_names yes } ~> sudo multipath -ll <redacted> (<redacted>) dm-1 HP,P2000G3 FC/iSCSI size=1.3T features='1 queue_if_no_path' hwhandler='0' wp=rw |-+- policy='round-robin 0' prio=130 status=active | |- 2:0:0:12 sdd 8:48 active ready running | `- 1:0:0:12 sdb 8:16 active ready running `-+- policy='round-robin 0' prio=10 status=enabled |- 1:0:1:12 sdc 8:32 active ready running `- 2:0:1:12 sde 8:64 active ready running We're having a problem where syslog on every server connected to the SAN is getting spammed with the following: kernel: sd X:0:0:Y [sdX] Warning! Received an indication that the LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. None of the LUN assignments of any of the volumes on the SAN have changed since mapping them to the ports connected to each individual server. So far my searches for a solution have turned up dead-ends and if anyone is able to help, I'd greatly appreciate it. Thanks, Trevor T. Kates CONFIDENTIALITY NOTICE: This electronic message contains information which may be legally confidential and/or privileged and does not in any case represent a firm ENERGY COMMODITY bid or offer relating thereto which binds the sender without an additional express written confirmation to that effect. The information is intended solely for the individual or entity named above and access by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution, or use of the contents of this information is prohibited and may be unlawful. If you have received this electronic transmission in error, please reply immediately to the sender that you have received the message in error, and delete it. Thank you.

1 0

CentOS-announce Digest, Vol 104, Issue 3
by centos-announce-request＠centos.org 08 Oct '13

08 Oct '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1406 CentOS 6 ypserv Update (Karanbir Singh) 2. CEEA-2013:1405 CentOS 6 NetworkManager Update (Karanbir Singh) 3. CESA-2013:1409 Moderate CentOS 6 xinetd Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Mon, 7 Oct 2013 13:44:08 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1406 CentOS 6 ypserv Update To: centos-announce(a)centos.org Message-ID: <20131007134408.GA34064(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1406 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1406.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 8389a7c0ba74106508f8f1fae32cd6e55e3a5803f0ff470febe98c249296b8e6 ypserv-2.19-26.el6_4.2.i686.rpm x86_64: 1c342a1772477d117f064c222c506d5c3999381ff4215280ef44f4d881b5c007 ypserv-2.19-26.el6_4.2.x86_64.rpm Source: a29428dd0dd11e396510e2ce6bcd0460ec184f871e137ade31e75574ecc9ef7f ypserv-2.19-26.el6_4.2.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 7 Oct 2013 13:44:22 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEEA-2013:1405 CentOS 6 NetworkManager Update To: centos-announce(a)centos.org Message-ID: <20131007134422.GA34182(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2013:1405 Upstream details at : https://rhn.redhat.com/errata/RHEA-2013-1405.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: aef82c1f575bdb5a247bc5e1745152836db2322301d9505a0b020008c47528fb NetworkManager-0.8.1-61.el6_4.i686.rpm 69e8e37cf997c93feca8eb775eaa1696abf5596801513bc61949223188b28a13 NetworkManager-devel-0.8.1-61.el6_4.i686.rpm 6a8b4e7841f582de33f33f7966e4c52c0dfbc19f006eb6f2fc61921b92cac389 NetworkManager-glib-0.8.1-61.el6_4.i686.rpm 725acdfb9ff4410d17db38b9a602885431df7464012c95b5e323b340c3973ca0 NetworkManager-glib-devel-0.8.1-61.el6_4.i686.rpm 1b2256b618e7e57a0a986644d7d3e76c53200ac573d1ef462a3392d45209c8b7 NetworkManager-gnome-0.8.1-61.el6_4.i686.rpm x86_64: 558e6736d638034a4be323c873e399dead57f6b27c43780928c60165c063d894 NetworkManager-0.8.1-61.el6_4.x86_64.rpm 69e8e37cf997c93feca8eb775eaa1696abf5596801513bc61949223188b28a13 NetworkManager-devel-0.8.1-61.el6_4.i686.rpm 362dfffe9a04608b1b8cc0c7ccd9858595c7b4364c2d180c9d80b6e88f045898 NetworkManager-devel-0.8.1-61.el6_4.x86_64.rpm 6a8b4e7841f582de33f33f7966e4c52c0dfbc19f006eb6f2fc61921b92cac389 NetworkManager-glib-0.8.1-61.el6_4.i686.rpm 6ed15d103b99a226bf20687aec1b0abc0275f308b7f7d9bda2f79335af05c864 NetworkManager-glib-0.8.1-61.el6_4.x86_64.rpm 725acdfb9ff4410d17db38b9a602885431df7464012c95b5e323b340c3973ca0 NetworkManager-glib-devel-0.8.1-61.el6_4.i686.rpm 0bf3261948dcc0fa9d2d5f5486b57ee7b404c37adc92a3c67a6bd6ee9c47dce5 NetworkManager-glib-devel-0.8.1-61.el6_4.x86_64.rpm 1e49662150be4abe5b54e7f7ff4349a9a1148aecf335dc46fb2d2d18e6000a2e NetworkManager-gnome-0.8.1-61.el6_4.x86_64.rpm Source: 098345f6ed2592459627a675bba6162715fdbbc1e7af6d4a666dc34176fd798c NetworkManager-0.8.1-61.el6_4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Mon, 7 Oct 2013 21:45:03 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2013:1409 Moderate CentOS 6 xinetd Update To: centos-announce(a)centos.org Message-ID: <20131007214503.GA39369(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:1409 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-1409.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 8b6ca635bdd172d22ee9f2eaef989e27df95e80151e9a9c7f4062afc71941140 xinetd-2.3.14-39.el6_4.i686.rpm x86_64: bc2abdac0f4e757715a3f87cdcab48579ff7e41674a06fafe28baaeb6cb71f46 xinetd-2.3.14-39.el6_4.x86_64.rpm Source: d7da128dd939f85a01dc146548bf59b70b66dc60d4d4943541aa54f0b4d3ba29 xinetd-2.3.14-39.el6_4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 104, Issue 3 ***********************************************

1 0

Re: [CentOS] OT: errors compiling kernel module as a rpm package
by C. L. Martinez 08 Oct '13

08 Oct '13

On Tue, Oct 8, 2013 at 8:27 AM, Reindl Harald <h.reindl(a)thelounge.net> wrote: > > > Am 08.10.2013 10:19, schrieb C. L. Martinez: >> Checking for unpackaged file(s): /usr/lib/rpm/check-files >> /home/clopezma/rpmbuild/BUILDROOT/openvswitch-kmod-1.11.0-1.el6.x86_64 >> error: Installed (but unpackaged) file(s) found: >> /etc/depmod.d/openvswitch.conf >> >> RPM build errors: >> Installed (but unpackaged) file(s) found: >> /etc/depmod.d/openvswitch.conf >> >> Any idea why?? I am not an expert rpm packager :)) > > because you simply did not list the file in the %files section > Yep, many thanks Reindl. Works.

1 0

OT: errors compiling kernel module as a rpm package
by C. L. Martinez 08 Oct '13

08 Oct '13

Hi all, I am trying to compile openswitch's kernel module in a CentOS 6.4 host, but fails in rpm-check: Requires: kernel(__alloc_percpu) = 0x55f2580b kernel(__alloc_skb) = 0x25421969 kernel(__dev_get_by_index) = 0x6a6d551b kernel(__init_waitqueue_head) = 0xffc7c184 kernel(__ip_select_ident) = 0x848695b3 kernel(__kmalloc) = 0x5a34a45c kernel(__list_add) = 0x0343a1a8 kernel(__nla_put) = 0x3e2e6f8c kernel(__nla_reserve) = 0x391515a6 kernel(__per_cpu_offset) = 0x32047ad5 kernel(__pskb_pull_tail) = 0xaa1b9b4e kernel(__put_net) = 0xcb27f3de kernel(__secpath_destroy) = 0x430555cc kernel(__skb_checksum_complete) = 0xcf0b750c kernel(__skb_warn_lro_forwarding) = 0x4d288688 kernel(__stack_chk_fail) = 0xf0fdf6cb kernel(__wake_up) = 0x642e54ac kernel(_read_lock) = 0x1a75caa3 kernel(_spin_lock) = 0x973873ab kernel(_spin_lock_bh) = 0x93cbd1ec kernel(_spin_lock_irq) = 0xecde1418 kernel(_spin_lock_irqsave) = 0x712aa29b kernel(_spin_unlock_bh) = 0x3aa1dbcf kernel(_spin_unlock_irqrestore) = 0x4b07e779 kernel(add_timer) = 0x46085e4f kernel(alloc_netdev_mq) = 0xafbc0d15 kernel(autoremove_wake_function) = 0xc8b57c27 kernel(boot_tvec_bases) = 0xfc6256b9 kernel(call_rcu) = 0x1251d30f kernel(complete) = 0xe456bd3a kernel(consume_skb) = 0x0de0cf25 kernel(cpu_possible_mask) = 0x76a495c1 kernel(csum_partial) = 0xe113bbbc kernel(del_timer) = 0x6307fc98 kernel(dev_base_lock) = 0xd1f91bcd kernel(dev_get_by_name) = 0x6edb8870 kernel(dev_queue_xmit) = 0x0d110dab kernel(dev_set_promiscuity) = 0x599a4d52 kernel(dst_release) = 0xec3f0011 kernel(eth_type_trans) = 0xd55704ee kernel(ether_setup) = 0x7f8bdd3a kernel(ethtool_op_get_link) = 0xd4be820d kernel(ethtool_op_get_sg) = 0x14ff9fcb kernel(ethtool_op_get_tso) = 0xcee83622 kernel(ethtool_op_get_tx_csum) = 0xecda447a kernel(ethtool_op_set_sg) = 0x89f397a9 kernel(ethtool_op_set_tso) = 0xbf4e56cf kernel(ethtool_op_set_tx_hw_csum) = 0xdcb79e8c kernel(find_next_bit) = 0xc0a3d105 kernel(finish_wait) = 0x9ccb2622 kernel(free_netdev) = 0x7bd0a577 kernel(free_percpu) = 0xc9ec4e21 kernel(genl_register_family_with_ops) = 0x17c50208 kernel(genl_register_mc_group) = 0x20385c58 kernel(genl_unregister_family) = 0x49439411 kernel(get_random_bytes) = 0x79aa04a2 kernel(inet_add_protocol) = 0xc0b47bb1 kernel(inet_del_protocol) = 0x09ac2202 kernel(inet_get_local_port_range) = 0x475100c2 kernel(inet_proto_csum_replace4) = 0xac63b351 kernel(ip_local_out) = 0xd7c18d8f kernel(ip_route_output_key) = 0x9affb5fe kernel(ipv6_ext_hdr) = 0x8e0b7743 kernel(jiffies) = 0x7d11c268 kernel(jiffies_to_msecs) = 0x37befc70 kernel(kernel_bind) = 0x957e225b kernel(kfree) = 0x037a0cba kernel(kfree_skb) = 0x3d75cbcf kernel(kmem_cache_alloc) = 0xee065ced kernel(kmem_cache_alloc_trace) = 0x2044fa9e kernel(kmem_cache_create) = 0xe4a639f8 kernel(kmem_cache_destroy) = 0x806e575f kernel(kmem_cache_free) = 0x7329e40d kernel(ksize) = 0xa0d3d560 kernel(kthread_create) = 0xc185e3ce kernel(kthread_should_stop) = 0xd2965f6f kernel(kthread_stop) = 0xcf08c5b6 kernel(ktime_get_ts) = 0xefdd5a63 kernel(list_del) = 0x0521445b kernel(local_bh_disable) = 0x3ff62317 kernel(local_bh_enable) = 0x0799aca4 kernel(malloc_sizes) = 0xd691cba2 kernel(mcount) = 0xb4390f9a kernel(memcpy) = 0x236c8c64 kernel(memmove) = 0xa3a5be95 kernel(memset) = 0xde0bdcff kernel(module_layout) = 0x14522340 kernel(mutex_lock) = 0xfee8a795 kernel(mutex_unlock) = 0x03758301 kernel(net_assign_generic) = 0xa43636ec kernel(net_namespace_list) = 0x6d2fc5a6 kernel(net_ratelimit) = 0xf6ebc03b kernel(netif_rx) = 0x75484296 kernel(netlink_broadcast) = 0x00312919 kernel(netlink_set_err) = 0xb3a0e7bb kernel(netlink_unicast) = 0x27418d14 kernel(nf_conntrack_destroy) = 0xd83791bc kernel(nla_find) = 0x444779c4 kernel(nla_memcpy) = 0xf1db1704 kernel(nla_parse) = 0xa58b6804 kernel(nla_put) = 0x37587aff kernel(nla_reserve) = 0x9c3fb1a2 kernel(nlmsg_notify) = 0x888d0b57 kernel(nr_cpu_ids) = 0xfe7c4287 kernel(openvswitch_handle_frame_hook) = 0xbe03eb4d kernel(param_get_int) = 0x6980fe91 kernel(param_set_int) = 0xff964b25 kernel(per_cpu__current_task) = 0x4f1939c7 kernel(per_cpu__kernel_stack) = 0x6dcaeb88 kernel(per_cpu__this_cpu_off) = 0x57adf756 kernel(prepare_to_wait) = 0x33d92f9a kernel(printk) = 0xea147363 kernel(pskb_expand_head) = 0xf5f5d2d9 kernel(pv_irq_ops) = 0x78764f4e kernel(random32) = 0xb86e4ab9 kernel(rcu_barrier) = 0x60a13e90 kernel(register_netdevice) = 0xe85f2610 kernel(register_netdevice_notifier) = 0x63ecad53 kernel(register_pernet_gen_device) = 0x72428be7 kernel(rtnl_lock) = 0xc7a4fbed kernel(rtnl_unlock) = 0x6e720ff2 kernel(schedule) = 0x01000e51 kernel(sk_release_kernel) = 0x829200f4 kernel(skb_checksum) = 0x10af67fe kernel(skb_checksum_help) = 0x72fad770 kernel(skb_clone) = 0xd87b0b1f kernel(skb_copy_and_csum_dev) = 0x51154c2a kernel(skb_copy_bits) = 0x20242fb9 kernel(skb_gso_segment) = 0x3461dbb2 kernel(skb_pull) = 0xd3c80841 kernel(skb_pull_rcsum) = 0xc238d18d kernel(skb_push) = 0x3229caeb kernel(skb_put) = 0x207b7e2c kernel(skb_trim) = 0xc01e3b23 kernel(sock_create_kern) = 0xe91d52ab kernel(strcmp) = 0xe2d5255a kernel(strcpy) = 0xe914e41e kernel(strlcpy) = 0x672144bd kernel(strlen) = 0x25ec1b28 kernel(unregister_netdevice) = 0x24498994 kernel(unregister_netdevice_notifier) = 0xfe769456 kernel(unregister_pernet_gen_device) = 0xf3ff6e0c kernel(wait_for_completion) = 0x1cefe352 kernel(wake_up_process) = 0x266c7c38 Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/clopezma/rpmbuild/BUILDROOT/openvswitch-kmod-1.11.0-1.el6.x86_64 error: Installed (but unpackaged) file(s) found: /etc/depmod.d/openvswitch.conf RPM build errors: Installed (but unpackaged) file(s) found: /etc/depmod.d/openvswitch.conf Any idea why?? I am not an expert rpm packager :))

1 0

Email access via Android device
by Frank Cox 08 Oct '13

08 Oct '13

I'm pretty sure that this is possible, but I don't currently know enough about email to know where to start. My main desktop computer runs Centos 6 and my preferred email client is Sylpheed, which supports both POP and IMAP email, and my "internal network" has a static IP address, so getting access to the computer from the big scary world via my phone isn't a problem. I have six different email accounts that live on various servers. I have Sylpheed set up to poll each account once every ten minutes using POP3 and download all incoming mail. Upon receipt, I have a whole lot of filters in Sylpheed to sort the mail into various subdirectories of my Mail directory. For example, one of my directory structures under Mail is inbox/1/2, and email may be sorted in Mail/inbox or Mail/inbox/1 or Mail/inbox/1/2, or other subdirectories outside of inbox like, for example, Mail/3. In short, I have a dozen or so subdirectories that Sylpheed sorts mail into based on various criteria like From or Subject. What I would like to do is somehow make this whole thing available on my Android phone (Samsung Galaxy 3). As it sits right now, if I am not sitting in front of my computer the only way I can check my email is to ssh into it and look at the files in each of those subdirectories using a text utility like less; this is really inconvenient and I can't reply to emails that way until I get back in front of my computer. I'm thinking that I need to run some kind of a mailserver on my computer that can be accessed by both Sylpheed locally and by ??? on my Android device. I get the impression that if I wanted to hand all of my email over to gmail I could then have something like this working. I don't particularly want to do that; I would rather have something running on my own machine to do it. I could use something else to poll for my email (fetchmail?). Sylpheed does have a configuration setting that I'm not currently using that says "Enable strict checking of summary caches -- enable this if the contents of the folders may be changed by other applications" so based on that I think it can handle having messages magically changed by a program on my Android device. What is the best way to approach this? My best idea so far is to set up fetchmail (or something) to do the pop downloads of incoming mail, and have some kind of a local imap server running though which I access the actual mail via any email client that can work with an imap account. Then I can set up Sylpheed to access only one account, that being the one on my local computer, and run some imap-using mail client on the Android device for remote access. Having never actually used an imap email account in this way, that leads to a couple of other questions. (The only thing I've ever done with imap is set up squirrelmail.) What about filtering the email into those directories? Procmail? And what happens to sent email -- I assume that the SMTP part of the mail client wouldn't actually change -- I would still send outbound mail directly through the mailserver where my email account exists, right? But does it (can it) also send a copy to the imap mail store so I can send email from Android and later on review what I sent with Sylpheed? -- MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com

5 9

CENTOS 5 incoming SFTP
by John McKelvey 07 Oct '13

07 Oct '13

Hello, I have a CENTOS 5 box that can reach the internet and can ping to/from all windows system on my home network. The catch is that I can not connect to the box using SSH from any windows machine, though they can easily ping the linux box and vice-versa. Suggestion of a possible solution would be most appreciated. Many thanks! John -- John McKelvey 10819 Middleford Pl Ft Wayne, IN 46818 260-489-2160 jmmckel(a)gmail.com

9 11

Unresolved references in libnetsnmpagent.so
by Styma, Robert E (Robert) 07 Oct '13

07 Oct '13

Hi, I am running an up to date centos5.9 system. The package, net-snmp-devel-5.3.2.2-20.el5 Contains among oteher things: /usr/lib/libnetsnmpagent.so When I link with this library (-lnetsnmpagent), I get a bunch of unresolved references.: My Google searches has not given me hints to where the C to Perl library exists. I would guess that yum would have loaded the correct package as a dependency: Could someone point me to the correct library? Thank you. /usr/lib/gcc/i386-redhat-linux/4.1.2/../../../libnetsnmpagent.so: undefined reference to `perl_free' /usr/lib/gcc/i386-redhat-linux/4.1.2/../../../libnetsnmpagent.so: undefined reference to `perl_parse' /usr/lib/gcc/i386-redhat-linux/4.1.2/../../../libnetsnmpagent.so: undefined reference to `Perl_eval_pv' /usr/lib/gcc/i386-redhat-linux/4.1.2/../../../libnetsnmpagent.so: undefined reference to `perl_run' /usr/lib/gcc/i386-redhat-linux/4.1.2/../../../libnetsnmpagent.so: undefined reference to `perl_alloc' /usr/lib/gcc/i386-redhat-linux/4.1.2/../../../libnetsnmpagent.so: undefined reference to `make_tempfile' /usr/lib/gcc/i386-redhat-linux/4.1.2/../../../libnetsnmpagent.so: undefined reference to `boot_DynaLoader' /usr/lib/gcc/i386-redhat-linux/4.1.2/../../../libnetsnmpagent.so: undefined reference to `perl_construct' /usr/lib/gcc/i386-redhat-linux/4.1.2/../../../libnetsnmpagent.so: undefined reference to `perl_destruct' /usr/lib/gcc/i386-redhat-linux/4.1.2/../../../libnetsnmpagent.so: undefined reference to `hosts_ctl' /usr/lib/gcc/i386-redhat-linux/4.1.2/../../../libnetsnmpagent.so: undefined reference to `Perl_newXS' Bob Styma Phoenix, AZ

3 3

CentOS Continuous Release Updates are Available for 5.10
by Johnny Hughes 07 Oct '13

07 Oct '13

The Continuous Release Updates for CentOS-5.10 are released to the CR repo. The anaconda and centos-release packages for 5.10 are not released into the CR (as they may need to change for the installable tree), but all other updates are there. For information on what the CR is, see this link: http://wiki.centos.org/AdditionalResources/Repositories/CR We are now focusing on creating an installable tree and creating the ISOs for CentOS-5.10 .. I would expect that we would have the full 5.10 release (tree and ISOs) in 10-14 days from this announcement. For a list of the updates in the CR, see this link: http://lists.centos.org/pipermail/centos-cr-announce/2013-October/thread.ht… Thanks to the CentOS QA team for their effort in testing this CR Repository so we can get it released so soon after the upstream release of EL 5.10. Thanks, Johnny Hughes

1 0

Anyone else getting Sane throwing i/o error after upgrades?
by Rob Kampen 07 Oct '13

07 Oct '13

Hi List, I have an old HP psc2210 that has performed well with xsane, libsane and related drivers until today. Note in the yum logs that recent upgrades to Sep 23 21:28:49 Updated: hplip-common-3.12.4-4.el6_4.1.x86_64 Sep 23 21:28:50 Updated: hplip-libs-3.12.4-4.el6_4.1.x86_64 Sep 23 21:29:17 Updated: libsane-hpaio-3.12.4-4.el6_4.1.x86_64 appear to have caused this error. scanimage -L reports device `hpaio:/usb/PSC_2200_Series?serial=MY34SF74HN0G' is a Hewlett-Packard PSC_2200_Series all-in-one but xsane reports (xsane:10677): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated upon startup, however the gui comes up fine, an attempt at scanning gives scanimage: sane_start: Error during device I/O device locks up and needs reset. Anyone else having this issue? I guess only option is to downgrade?? TIA Rob

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss