Discuss

discuss@lists.centos.org

34758 discussions

elrepo kmod-sk98lin.i686
by Steve Brooks 03 Sep '13

03 Sep '13

Hi, I noticed that one of out "Centos 5" servers with an onboard "Marvell 88E8001" was showing some packet overruns. # ifconfig -a eth0 | grep "RX p" RX packets:1629537 errors:0 dropped:0 overruns:3694 frame:0 So I thought about using a driver from "elrepo" the lspci id's suggest to install the "kmod-sk98lin" driver. I yum installed the kernel module and on reboot found the server was still using the old "skge" driver. ethtool -i eth0 driver: skge version: 1.6 Looking at modprobe.conf shows # cat /etc/modprobe.conf | grep eth0 alias eth0 skge [1] Should I just change the "skge" in the above line to "sk98lin" and reboot? [2] This motherboard has a "Marvell 88E8052" as a second NIC, currently disbled in the BIOS. Problem is that the "88E8001" NIC has to be "eth0" as it is the one used in a "flexlm" license server file. In Centos five how can you *force* a given NIC controller to always post at "eth0" ? Cheers, Steve

4 7

Request for suggesstions -- inexpensive 10Gbps NAS / 300TB JBOD with centos head
by Rajagopal Swaminathan 03 Sep '13

03 Sep '13

Greetings, I am located in India. Any experience or suggestions for building blocks using copper preferably (and not fiber SAN)? Enclosures, Technologies (iscsi etc). Many US companies are very picky about export regulations for such humongous data appetites. The application is mainly A/V or vfx file handling. -- Regards, Rajagopal

1 0

CentOS-announce Digest, Vol 103, Issue 1
by centos-announce-request＠centos.org 03 Sep '13

03 Sep '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEEA-2013:1188 CentOS 6 neon Update (Karanbir Singh) 2. CEBA-2013:1189 CentOS 6 cluster Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Tue, 3 Sep 2013 09:15:58 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEEA-2013:1188 CentOS 6 neon Update To: centos-announce(a)centos.org Message-ID: <20130903091558.GA41169(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2013:1188 Upstream details at : https://rhn.redhat.com/errata/RHEA-2013-1188.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: b05110145a3e9f94e57eb17979fe3cc6a0dd1a516c364c4b41bd6e30de66f9ed neon-0.29.3-3.el6_4.i686.rpm 80b95c1be133ec72c19cd0ae0d932498f17efca0f5b4807f06f4f559ad91d8ac neon-devel-0.29.3-3.el6_4.i686.rpm x86_64: b05110145a3e9f94e57eb17979fe3cc6a0dd1a516c364c4b41bd6e30de66f9ed neon-0.29.3-3.el6_4.i686.rpm 0b7bed2cdf503c05397de2d9f5c6e7f038c964a3cc58d01fd6a1cbf64a2897b4 neon-0.29.3-3.el6_4.x86_64.rpm 80b95c1be133ec72c19cd0ae0d932498f17efca0f5b4807f06f4f559ad91d8ac neon-devel-0.29.3-3.el6_4.i686.rpm c622aea27cf4d7e5253dd78bc51b8e0b0b6f15bfad520a8a1251f2e8e2b5a55d neon-devel-0.29.3-3.el6_4.x86_64.rpm Source: 1573653c400c5b7e0db455ee99aa664d360c06d5db36630688281a0b07443e47 neon-0.29.3-3.el6_4.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Tue, 3 Sep 2013 09:21:24 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1189 CentOS 6 cluster Update To: centos-announce(a)centos.org Message-ID: <20130903092124.GA41488(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1189 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1189.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 92a3ab1c34cad52d6778907abe95e0031414a726f2e449bec0a15dded9c9d44e clusterlib-3.0.12.1-49.el6_4.2.i686.rpm f8d769986818a20fd1bab00795863afe90d65ce541c4aa2cfbe348f78038b48e clusterlib-devel-3.0.12.1-49.el6_4.2.i686.rpm 77474f7e8f26489ea2cf5041ea405e2d4bcfd3a791e965b660b4438cd9bb2574 cman-3.0.12.1-49.el6_4.2.i686.rpm 93b228d14a8e43870965382de5bd47d747112148384cb5681a2762c9e35cc497 gfs2-utils-3.0.12.1-49.el6_4.2.i686.rpm x86_64: 92a3ab1c34cad52d6778907abe95e0031414a726f2e449bec0a15dded9c9d44e clusterlib-3.0.12.1-49.el6_4.2.i686.rpm 0a60a9ca1fff1ffa309065676f7443df967e3f8f8b6d3921e4b53bf5d70fac6b clusterlib-3.0.12.1-49.el6_4.2.x86_64.rpm f8d769986818a20fd1bab00795863afe90d65ce541c4aa2cfbe348f78038b48e clusterlib-devel-3.0.12.1-49.el6_4.2.i686.rpm ed4873e55564f95ed35bcdf2b8aed165d6d4bd1fde8ae1f60877dda118bca2d6 clusterlib-devel-3.0.12.1-49.el6_4.2.x86_64.rpm c9c7ea3423d2c457cc7bce18c1e55769e5826ba4d87a20b8fa9bab05b7169cb1 cman-3.0.12.1-49.el6_4.2.x86_64.rpm a76c9a228148f28afcef6c39a6d0d9984b735fdc2aeeed72ffa88831e8b09915 gfs2-utils-3.0.12.1-49.el6_4.2.x86_64.rpm Source: 528a954d68cf6e59c23e5ccac4906102950fdb52fdf0ca01d70e5b3e4e662163 cluster-3.0.12.1-49.el6_4.2.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 103, Issue 1 ***********************************************

1 0

Two external interfaces, one with "default" route and ping problem
by Jobst Schmalenbach 03 Sep '13

03 Sep '13

Hi I have two different IP addresses (in a block of /29), one is on port 0 and the other is on port 2 of a Ciso 888. I am doing this so I can have two different certs with two different ip addresses. I have tried: 1) one machine, two real interfaces, two cables (eth0 and eth2) 2) one machine, one real interface eth0 and one virtual interface eth0:1, one network cable Using number 2) I can ping the two different ip addresses, no problem. The only problem here is that iptables does not work (I cannot create rules for eth0:1 - and yes I know about the security implications). I have a problem with number number 1) I can ping the first ip address and I get a return, but I cannot get a return when I ping the second ip address. I can see traffic coming into the second interface but it does not return. Now one of the interfaces needs the "default" route applied (is this correct??), which is eth0. I assume this is a routing problem? What do I need to do to get this to work? Jobst -- Student to Teacher: Sir, what's an oxymoron? .... Teacher to Student: "Microsoft Works". | |0| | Jobst Schmalenbach, jobst(a)barrett.com.au, General Manager | | |0| Barrett Consulting Group P/L & The Meditation Room P/L |0|0|0| +61 3 9532 7677, POBox 277, Caulfield South, 3162, Australia

3 3

Message from syslogd@localhost ... kernel:Disabling IRQ #17
by Michael Hennebry 02 Sep '13

02 Sep '13

" Message from syslogd@localhost at Aug 27 08:57:53 ... kernel:Disabling IRQ #17" is the message I got on all my terminal windows at the time indicated. What is it complaining about? What should I do about it? I got some information from dmesg. It mentions IRQ 17, but the only error is from before the most recent hibernation. Here are some excerpts, in order from dmesg: SELinux: initialized (dev proc, type proc), uses genfs_contexts hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. fuse init (API version 7.13) [Hardware Error]: Machine check events logged SELinux: initialized (dev sdc1, type vfat), uses genfs_contexts PM: Syncing filesystems ... done. ata_piix 0000:00:1f.1: PCI INT A disabled ACPI: Preparing to enter system sleep state S4 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline SMP alternatives: switching to UP code PM: Creating hibernation image: PM: Need to copy 141814 pages PM: Restoring platform NVS memory microcode: CPU0 updated to revision 0x2e, date = 2004-08-11 Force enabled HPET at resume Enabling non-boot CPUs ... SMP alternatives: switching to SMP code Booting Node 0 Processor 1 APIC 0x1 Initializing CPU#1 microcode: CPU1 updated to revision 0x2e, date = 2004-08-11 CPU1 is up ACPI: Waking up from system sleep state S4 ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880003, writing 0x2880007) Restarting tasks ... done. psmouse serio1: ID: 10 00 64 e100 0000:02:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present irq 17: nobody cared (try booting with the "irqpoll" option) Pid: 0, comm: swapper Not tainted 2.6.32-358.14.1.el6.i686 #1 Call Trace: [<c04bb8d4>] ? __report_bad_irq+0x24/0x90 [<c04bba90>] ? note_interrupt+0x150/0x190 [<c04bc0eb>] ? handle_fasteoi_irq+0x9b/0xc0 [<c040b9f2>] ? handle_irq+0x32/0x60 [<c045fe95>] ? irq_exit+0x35/0x70 [<c040b027>] ? do_IRQ+0x47/0xc0 [<c0409f10>] ? common_interrupt+0x30/0x38 [<f80b00d8>] ? radeon_connector_set_property+0x1a8/0x2a0 [radeon] [<f80d2f80>] ? r600_irq_process+0x140/0x6f0 [radeon] [<f80b9042>] ? radeon_driver_irq_handler_kms+0x12/0x20 [radeon] [<c04b9f25>] ? handle_IRQ_event+0x45/0x140 [<c04bc0b5>] ? handle_fasteoi_irq+0x65/0xc0 [<c040b9f2>] ? handle_irq+0x32/0x60 [<c040b027>] ? do_IRQ+0x47/0xc0 [<c0409f10>] ? common_interrupt+0x30/0x38 [<c0434f52>] ? native_safe_halt+0x2/0x10 [<c041121d>] ? default_idle+0x4d/0xc0 [<c0408884>] ? cpu_idle+0x94/0xd0 [<c0ac39fc>] ? start_kernel+0x3b0/0x3b5 [<c0ac348a>] ? unknown_bootoption+0x0/0x190 handlers: [<f849b2e0>] (snd_intel8x0_interrupt+0x0/0x250 [snd_intel8x0]) [<f915c7f0>] (azx_interrupt+0x0/0x1a0 [snd_hda_intel]) Disabling IRQ #17 google has not helped much. I note that https://bugzilla.redhat.com/show_bug.cgi?id=381331 was closed with a WONTFIX. I also grepped dmesg for IRQ and 17. There were four distinct messages: i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Disabling IRQ #17 The first and last were there once, first and last. The others alternated, eleven times each. I think I kow what snd_hda_intel and Intel ICH are, but it doesn't help I'm really fuzzy on i801_smbus. What is syslogd complaining about and what should I do about it? -- Michael hennebry(a)web.cs.ndsu.NoDak.edu "On Monday, I'm gonna have to tell my kindergarten class, whom I teach not to run with scissors, that my fiance ran me through with a broadsword." -- Lily

2 3

Re: [CentOS] MIssing bell
by adrian＠pa0rda.nl 02 Sep '13

02 Sep '13

Hi, Earlier I asked how I could arrange a bell tone on my CentOS box. I have pcspkr loaded, I can play music over my boxes but the system beep or bell is missing. Seeveral people commented on gnome issues, but I'm using only text-mode. Whe I go down with the cursor e.g. on the command-line I dont hear anything. Is there a way to switch the bell/beep on??? Adrian -- Adri P. van Bloois Antonlaan 104 email: adrian(a)pa0rda.nl 3701 VG Zeist voice: +31-(0)-30-6912741 The Netherlands fax: NONE 52 05'15.77"N 5 4'44.56"E QTH-locater JO 22 OC The whole point of cooking is to get as much flavour out of the ingredients as possible. -- Delia Smith

4 3

Adding new root suffix to 389 server
by Stephen Harris 30 Aug '13

30 Aug '13

My apologies if this is off-topic... On a centos6.4 system I installed 389 server from EPEL. It seems to work well enough. However I'm trying to script things, rather than do it via the GUI. So, for example, I want to add a new suffix: #!/bin/ksh -p pswd=$(cat ~/passwd) add() { echo "dn: cn=example,cn=ldbm database,cn=plugins,cn=config changetype: add objectclass: extensibleObject objectclass: nsBackendInstance nsslapd-suffix: dc=example,dc=com dn: cn=dc=example\,dc=com,cn=mapping tree,cn=config changetype: add objectclass: top objectclass: extensibleObject objectclass: nsMappingTree nsslapd-state: backend nsslapd-backend: example cn: dc=example,dc=com " | ldapmodify -a -D "cn=directory manager" -w $pswd -h $1 } add my_server This appears to work. adding new entry "cn=example,cn=ldbm database,cn=plugins,cn=config" adding new entry "cn=dc=example\,dc=com,cn=mapping tree,cn=config" However I then try and use this new root suffix: #!/bin/ksh -p pswd=$(cat ~/passwd) add() { echo "dn: dc=stephen_test,dc=example,dc=com objectClass: top objectClass: domain dc: stephen_test " | ldapmodify -a -D "cn=directory manager" -w $pswd -h $1 } add my_server And this fails adding new entry "dc=stephen_test,dc=example,dc=com" ldap_add: No such object (32) Similarly: % ldapsearch -x -b 'dc=example,dc=com' # extended LDIF # # LDAPv3 # base <dc=example,dc=com> with scope subtree # filter: (objectclass=*) # requesting: ALL # # search result search: 2 result: 32 No such object # numResponses: 1 Clearly I'm missing something obvious... but I can't see what! -- rgds Stephen

1 0

Just Curious
by Rajagopal Swaminathan 30 Aug '13

30 Aug '13

Greetings, I wonder why the bugfixes gets implemented so fast that there are frequent announcements in centos-announce list. If only I could lay my (very) dirty hands on the sources of information... With warm Regards, Rajagopal

2 1

ntpd heavy CPU consumption
by Steve Thompson 29 Aug '13

29 Aug '13

CentOS 6.4, x86_64. ntpd on one of my systems has started consuming 66% of one core, although it appears to be functioning correctly otherwise. No pertinent logs. Of course, nothing was changed :) I've seen this before many times, but usually the CPU consumption falls back to normal within a day or so, but this has been going on for several weeks now. Stopping and restarting ntpd makes no difference. Reinstalling ntpd makes no difference. The ntpd.conf file is the same as on 200+ other systems, all of which work normally. Anyone seen this before? Steve

2 1

list installed packaged, without formatting overhead
by Mihamina Rakotomandimby 29 Aug '13

29 Aug '13

Hi all, In order to make the same installation on two servers where all was installed via yum/rpm, I want to dump a list of all installed packages on the first server. My problem is if I just "yum list installed", some weird formatting prints packages information on 2 lines... I have to # yum list installed | awk '{print $1}' \ | grep -v '@' | grep -vE '^[0-9]' Is there a cleaner way? # rpm -aq Is not OK because it includes version in a way it's more hard to parse just the package name. Thank you. -- RMA.

2 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss