Discuss

discuss@lists.centos.org

34758 discussions

Firewire on Centos-6 ???
by Fred Smith 02 Aug '13

02 Aug '13

Hi all! I'm trying to use my first-ever firewire device, and just OOB I'm not getting very far, so advice would be appreciated. When I plug in the device I see some entries in /var/log/messages: Jul 27 14:50:30 fcshome kernel: firewire_core: phy config: card 0, new root=ffc1, gap_count=5 Jul 27 14:50:31 fcshome kernel: firewire_core: created device fw1: GUID 0003f300118123f9, S100 lsmod says this: # lsmod | grep fire firewire_ohci 24695 0 firewire_core 50151 1 firewire_ohci crc_itu_t 1717 2 udf,firewire_core I have these 1394-related packages installed: # yum list installed | grep 1394 libavc1394.x86_64 0.5.3-9.1.el6 @anaconda-CentOS-201207061011.x86_64/6.3 libdc1394.x86_64 2.1.2-3.4.el6 @base libdc1394-docs.x86_64 2.1.2-3.4.el6 @base libdc1394-tools.x86_64 2.1.2-3.4.el6 @base libraw1394.x86_64 2.0.4-1.el6 @anaconda-CentOS-201207061011.x86_64/6.3 lspci says this: 03:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) the only mention of 1394 that I see in /etc/modprobe.d is this (grep output): dist.conf:install eth1394 /bin/true which, to the limited extent of my understanding shouldn't be a problem. I'm trying to use Kino. when I start it up and click the "capture" tab on the right I get a warning in the bar at the bottom of the Kino window that reads: WARNING: raw1394 kernel module not loaded or failure to read/write /dev/raw/1394! which makes sense since there ins't a /dev/raw/1394. however, according to this: # find /dev -name \*firewire\* -print /dev/.udev/db/firewire:fw1 /dev/.udev/db/firewire:fw0 there are two firewire device nodes. Should Kino be using one of those device nodes instead of /dev/raw/1394? Or if not, does anyone have further advice (preferably helpful advice) ?? thanks! Fred -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- "Not everyone who says to me, 'Lord, Lord,' will enter the kingdom of heaven, but only he who does the will of my Father who is in heaven." ------------------------------ Matthew 7:21 (niv) -----------------------------

3 4

CentOS-announce Digest, Vol 102, Issue 2
by centos-announce-request＠centos.org 02 Aug '13

02 Aug '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:1127 CentOS 6 device-mapper-multipath Update (Johnny Hughes) 2. CEBA-2013:1128 CentOS 5 poppler Update (Johnny Hughes) 3. CEEA-2013:1130 CentOS 5 cciss Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 1 Aug 2013 10:01:41 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1127 CentOS 6 device-mapper-multipath Update To: centos-announce(a)centos.org Message-ID: <20130801100141.GA59728(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1127 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1127.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: c1bce28dc2a2c48bc58e89ae0da056a213d55318d45668d41596bc57bd0260c5 device-mapper-multipath-0.4.9-64.el6_4.1.i686.rpm bf728f140ef71be5c6e33195c9c00b07957650db01b2552a337647eef561e2cf device-mapper-multipath-libs-0.4.9-64.el6_4.1.i686.rpm 7f4f9ffdcac473c577362c21764779b80400eefa3a773af88261417d6a6610e7 kpartx-0.4.9-64.el6_4.1.i686.rpm x86_64: fdd267866a9988835f33ad6b28cae5bd09998fbb99714dca6e18dbcfe9b0efac device-mapper-multipath-0.4.9-64.el6_4.1.x86_64.rpm bf728f140ef71be5c6e33195c9c00b07957650db01b2552a337647eef561e2cf device-mapper-multipath-libs-0.4.9-64.el6_4.1.i686.rpm 2e4ae537674dbb3ec2bfcc89b5b6a69cf1ae38967ba00137027b553910230dfb device-mapper-multipath-libs-0.4.9-64.el6_4.1.x86_64.rpm 937f4ad29946260cb619376167465405b3c261e5117a0cddd53f149271773dcf kpartx-0.4.9-64.el6_4.1.x86_64.rpm Source: e48b106a194f4fac8d60d6a79ebbd6e23a3c1e46d31e4179fb2eb9c8ddc83043 device-mapper-multipath-0.4.9-64.el6_4.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Thu, 1 Aug 2013 10:47:23 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:1128 CentOS 5 poppler Update To: centos-announce(a)centos.org Message-ID: <20130801104723.GA12884(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:1128 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-1128.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: cee7e02bd829a945d12ce952f718d9bf9e559a51ce1ccde9cb8ea03d6e539635 poppler-0.5.4-19.el5_9.2.i386.rpm 5924a1ba816e34a6db403f81cf3c4a84804a46cd1a1c49169543f5648cca51cf poppler-devel-0.5.4-19.el5_9.2.i386.rpm 7d71b524e0e5e207f8498fd5e998f1eaf0034471f5b9b6abd328c91fc1e85da8 poppler-utils-0.5.4-19.el5_9.2.i386.rpm x86_64: cee7e02bd829a945d12ce952f718d9bf9e559a51ce1ccde9cb8ea03d6e539635 poppler-0.5.4-19.el5_9.2.i386.rpm 000fddbd8a01ad15f703f4a67d8657cf751090303309691f0ff23c92db16e950 poppler-0.5.4-19.el5_9.2.x86_64.rpm 5924a1ba816e34a6db403f81cf3c4a84804a46cd1a1c49169543f5648cca51cf poppler-devel-0.5.4-19.el5_9.2.i386.rpm 7046b600bbf48d0107e03bd338769e1c28b469bad8f4fd8c4af9a1b5cbf57da9 poppler-devel-0.5.4-19.el5_9.2.x86_64.rpm 6807755b4e4a5c1bcfef84f0928a557a16afcea29abb2e9d338432e633bd24af poppler-utils-0.5.4-19.el5_9.2.x86_64.rpm Source: 57dd885fc9831072fcb993b4d83ca788f430499c1c0cbddb58963dc8f91d6c5f poppler-0.5.4-19.el5_9.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Thu, 1 Aug 2013 11:26:47 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2013:1130 CentOS 5 cciss Update To: centos-announce(a)centos.org Message-ID: <20130801112647.GA14619(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2013:1130 Upstream details at : https://rhn.redhat.com/errata/RHEA-2013-1130.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 31dfe744e171002bdc77819e73e9900aa039129d94f4ae36405d87a954292da0 kmod-cciss-3.6.28-2.el5_9.i686.rpm d2f886ac813ae8713a62a8f3d7f6c6ae6875fe5d8f37f47626bb5e1c9d70d03a kmod-cciss-PAE-3.6.28-2.el5_9.i686.rpm f5162ef00e5a020b26633a866b90394725c5b1554158bd6059c16be4baacff2c kmod-cciss-xen-3.6.28-2.el5_9.i686.rpm x86_64: 1d89cb721b501098db63e57b4a97c7c04767f177e07d917cccb58ee87354de9d kmod-cciss-3.6.28-2.el5_9.x86_64.rpm 1a4bf15896ce4460d9e04fac9320565d839e25ebc5949adc8e3b08b6dfe137c1 kmod-cciss-xen-3.6.28-2.el5_9.x86_64.rpm Source: 2f062bfd801287311edac258f91d9da73fb2708657ca58ad2f3c40afd30d2313 cciss-3.6.28-2.el5_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 102, Issue 2 ***********************************************

1 0

<ask> What is tools for remastering Centos 6 ?
by Iftakhul Anwar 01 Aug '13

01 Aug '13

Hi All, I have fully configured Centos 6.4 machine and my own application inside. I want to remastering my own machine so that can used to another machine without any configuration. any software like remastersys on Centos which can use for remastering Centos 6 ? Thanks -- *M.Iftakhul Anwar* Meruvian Integrator High Performance Computing / Cloud Computing (HPC/CC) Office Phone : 021-93586577 Mobile Phone : 085215331477 Blog : http://blog.mervpolis.com/roller/anwar FB : http://www.facebook.com/troya.adromeda Website : www.meruvian.org

8 17

Django 1.5 Upgrade
by Larry Martell 01 Aug '13

01 Aug '13

Anyone here using django on centos. On my Mac, running python 2.7, I upgraded from 1.4 to 1.5 by doing this: rm -rf /Library/Python/2.7/site-packages/django Followed by python setup.py install in the dir I untar-ed Django-1.5.1 to. This all worked fine. On a Centos system running python 2.6 I did: rm -rf /usr/lib/python2.6/site-packages/django followed by the setup.py install. My django app is working, and appears to be running 1.5, however anytime I use manage.py (for collectstatic or syncdb or test, for example) I get these messages: /usr/lib/python2.6/site-packages/django/core/management/__init__.py:465: DeprecationWarning: The 'execute_manager' function is deprecated, you likely need to update your 'manage.py'; please see the Django 1.4 release notes (https://docs.djangoproject.com/en/dev/releases/1.4/) DeprecationWarning) /usr/lib/python2.6/site-packages/django/core/management/__init__.py:409: DeprecationWarning: The 'setup_environ' function is deprecated, you likely need to update your 'manage.py'; please see the Django 1.4 release notes (https://docs.djangoproject.com/en/dev/releases/1.4/) DeprecationWarning) So it seems I still have some 1.4 stuff around. I don't get this on my Mac. How can I get rid of these messages?

2 2

CentOS-announce Digest, Vol 102, Issue 1
by centos-announce-request＠centos.org 01 Aug '13

01 Aug '13

1 0

SSL vulnerabilities
by Anumeha Prasad 01 Aug '13

01 Aug '13

Hi, Following 2 vulnerabilities were detected in VA scan required for PCI compliance: 1. SSL Weak Cipher Suites Supported 2. SSL Medium Strength Cipher Suites Supported I'm using CentOS 5.8 with open ssl version "openssl-0.9.8e-22.el5_8.4". Any idea how to get rid of this? Thanks, Anumeha

4 4

Centos media repo
by Patrick 01 Aug '13

01 Aug '13

I can't seem to check off the centos media repo from within the add/remove application. Is there a way to do this? I tried to invoke gpk-application from root but it didn't work. Thanks-Patrick

3 3

Kernel 3.10 and CentOS 5
by Stephen Harris 31 Jul '13

31 Jul '13

I have a Centos 5 machine which I've just compiled the 3.10.4 kernel on (remembering to set CONFIG_SYSFS_DEPRECATED) because I needed new rtlwifi drivers for my rtl8192cu device. So far, so good. It seems to work. Except /proc/bus/usb doesn't exist anymore. USB_DEVICEFS has been removed. An older kernel (3.2.9) says Usbfs entries are files and not character devices; usbfs can't handle Access Control Lists (ACL) which are the default way to grant access to USB devices for untrusted users of a desktop system. The usbfs functionality is replaced by real device-nodes managed by udev. These nodes lived in /dev/bus/usb and are used by libusb. Has anyone got udev on C5 working with this new kernel so my USB devices show? (It's not causing me any real issues, other than "lsusb" nor working; just curious!) -- rgds Stephen

5 5

looking for a comprehensive list of centos-compatible yum repositories (for gnustep program)
by Dan Hitt 31 Jul '13

31 Jul '13

I installed CentOS 6.4 on a partition on my computer a few days ago, and i'm trying to equip it with the software i think i need. For example, i need, or i think i need, a couple of gnustep programs for uploading images from my digital camera (the programs being openapp and Camera.app). I imagine that these are old enough that they must surely exist in rpms somewhere. But i apparently don't know how to google around sufficiently well to locate a repository that contains them, or even that contains packages that i know exist as rpms. For example: i'm certain that an rpm exists for a package called gnustep-make, because its name popped up on http://forums.fedoraforum.org/showthread.php?t=279655 But if i try 'sudo yum install gnustep-make' i get 'No package gnustep-make available.' So that clearly means that i don't have enough repositories configured for use. So, i'd be grateful for any pointers to a list of CentOS-compatible repositories that i can put in the yum configuration (/etc/yum.repos.d or elsewhere). (Maybe this is a FAQ, or an RTFM --- i'd appreciate any steering here!) dan

3 3

surveillance DVR
by m.roth＠5-cent.us 31 Jul '13

31 Jul '13

Does anyone know of a DVR that runs Linux that does NOT USE Active-X, and/or allows logging in directly? All I keep running into are crap that ->requires<- IE, and don't allow directly logging in. mark

4 4

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss