Discuss

discuss@lists.centos.org

34753 discussions

Centos6.4 routing problem
by Johan Vermeulen 05 Jun '13

05 Jun '13

dear All, I'm facing this routing problem, the setup is actualy part of ltsp, but I think this problem is Centos-specific. The server is a Dell Poweredge R210. The install is standard 6.4, updated. I have one nic facing the public internet: vi /etc/sysconfig/network-scripts/ifcfg-em1 DEVICE=em1 BOOTPROTO=none HWADDR=d4:ae:52:c1:28:2b NM_CONTROLLED=no ONBOOT=yes TYPE=Ethernet UUID="cdfe1d58-c56c-47fc-8a93-5df2e168d176" IPV6INIT=no USERCTL=no DNS2=195.238.2.22 DNS1=192.168.66.1 IPADDR=192.168.66.5 NETMASK=255.255.255.128 GATEWAY=192.168.66.1 and one nic serving the lan and dhpcd. vi /etc/sysconfig/network-scripts/ifcfg-em2 DEVICE=em2 BOOTPROTO=none HWADDR=d4:ae:52:c1:28:2c NM_CONTROLLED=no ONBOOT=yes TYPE=Ethernet UUID="e72a17b6-fb5f-43f0-9136-fa4d92b542ae" IPADDR=192.168.70.129 NETMASK=255.255.255.128 IPV6INIT=no USERCTL=no in iptables, prerouting and masquerading are configured : # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *nat :PREROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -o eth+ -j MASQUERADE -A POSTROUTING -o em2 -j MASQUERADE COMMIT *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -i eth+ -j ACCEPT -A INPUT -i em2 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT -A FORWARD -p icmp -j ACCEPT -A FORWARD -i lo -j ACCEPT -A FORWARD -i eth+ -j ACCEPT -A FORWARD -i em2 -j ACCEPT -A FORWARD -o eth+ -j ACCEPT -A FORWARD -o em2 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT and in /etc/sysctl.conf ipforwarding is set to 1 # Kernel sysctl configuration file for Red Hat Linux # # For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and # sysctl.conf(5) for more details. # Controls IP packet forwarding net.ipv4.ip_forward = 1 clients get ip adresses from dhcp server, and there's no other dhcp server on the lan. But clients cannot ping the public internet, e.g. 8.8.8.8 the only EM I'm seeing is when executing command : [root@centoshofkwartier ~]# sysctl -p /etc/sysctl.conf net.ipv4.ip_forward = 1 net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.default.accept_source_route = 0 kernel.sysrq = 0 kernel.core_uses_pid = 1 net.ipv4.tcp_syncookies = 1 error: "net.bridge.bridge-nf-call-ip6tables" is an unknown key error: "net.bridge.bridge-nf-call-iptables" is an unknown key error: "net.bridge.bridge-nf-call-arptables" is an unknown key kernel.msgmnb = 65536 kernel.msgmax = 65536 kernel.shmmax = 68719476736 kernel.shmall = 4294967296 I switched the cables and switches, and changed the connection with the public internet. Can anybody offer some advise on this? Greetings, J. -- Johan Vermeulen IT-medewerker Caw De Kempen Opensource Software is the future.

5 7

Re: [CentOS] Centos6.4 routing problem
by Bonnie Mtengwa 05 Jun '13

05 Jun '13

Sent from my HTC ----- Reply message ----- From: "Johan Vermeulen" <jvermeulen(a)cawdekempen.be> To: "CentOS mailing list" <centos(a)centos.org> Subject: [CentOS] Centos6.4 routing problem Date: Tue, Jun 4, 2013 16:13 hello Mark, thanks for the help. Op 04-06-13 15:56, m.roth(a)5-cent.us schreef: > Johan Vermeulen wrote: >> dear All, >> >> I'm facing this routing problem, the setup is actualy part of ltsp, but >> I think this problem is Centos-specific. >> >> The server is a Dell Poweredge R210. The install is standard 6.4, updated. >> >> I have one nic facing the public internet: >> > First, we always have BOOTPROTO set - in your case, assuming you're > getting em1's IP from DHCP, you should have that; in the case of em2, it's > BOOTPROTO=static. As it is, I'd think (without testing) that em1 is trying > to present a reserved IP to the 'Net, which is a no-no. both ifcfg's now have BOOTPROTO=static and I restarted network and dhcpd. > >> vi /etc/sysconfig/network-scripts/ifcfg-em1 >> >> DEVICE=em1 >> BOOTPROTO=none >> HWADDR=d4:ae:52:c1:28:2b >> NM_CONTROLLED=no >> ONBOOT=yes >> TYPE=Ethernet >> UUID="cdfe1d58-c56c-47fc-8a93-5df2e168d176" >> IPV6INIT=no >> USERCTL=no >> DNS2=195.238.2.22 >> DNS1=192.168.66.1 >> IPADDR=192.168.66.5 >> NETMASK=255.255.255.128 >> GATEWAY=192.168.66.1 >> >> and one nic serving the lan and dhpcd. >> >> vi /etc/sysconfig/network-scripts/ifcfg-em2 >> >> DEVICE=em2 >> BOOTPROTO=none >> HWADDR=d4:ae:52:c1:28:2c >> NM_CONTROLLED=no >> ONBOOT=yes >> TYPE=Ethernet >> UUID="e72a17b6-fb5f-43f0-9136-fa4d92b542ae" >> IPADDR=192.168.70.129 >> NETMASK=255.255.255.128 >> IPV6INIT=no >> USERCTL=no > <snip> > Secondly, what does route show? > > mark > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos [root@centoshofkwartier ~]# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.70.128 * 255.255.255.128 U 0 0 0 em2 192.168.66.0 * 255.255.255.128 U 0 0 0 em1 link-local * 255.255.0.0 U 1002 0 0 em1 link-local * 255.255.0.0 U 1003 0 0 em2 default 192.168.66.1 0.0.0.0 UG 0 0 0 em1 greetings, J. _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

CentOS-announce Digest, Vol 100, Issue 1
by centos-announce-request＠centos.org 04 Jun '13

04 Jun '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:0892 CentOS 5 rgmanager Update (Johnny Hughes) 2. CEBA-2013:0891 CentOS 6 setuptool FASTTRACK Update (Johnny Hughes) 3. CEBA-2013:0893 CentOS 6 selinux-policy Update (Johnny Hughes) 4. CESA-2013:0898 Moderate CentOS 5 mesa Update (Johnny Hughes) 5. CESA-2013:0897 Important CentOS 6 mesa Update (Johnny Hughes) 6. CESA-2013:0896 Moderate CentOS 6 qemu-kvm Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 3 Jun 2013 11:48:18 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0892 CentOS 5 rgmanager Update To: centos-announce(a)centos.org Message-ID: <20130603114818.GA27622(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0892 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0892.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 9990c86eb1cbcef8237cce912d59b4e2758e8473a85d70de068e51e2348cdc0f rgmanager-2.0.52-37.el5.centos.3.i386.rpm x86_64: e8d6e01befd489b81022b98d2ffcb7b96b3a2cc8666fd5eb632d09bb4ab1d763 rgmanager-2.0.52-37.el5.centos.3.x86_64.rpm Source: 276c23ce42ca75b3dd2f25ee0e57b21024142a188a20bf7f2a06a1e1f44c7700 rgmanager-2.0.52-37.el5.centos.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 3 Jun 2013 12:34:31 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0891 CentOS 6 setuptool FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20130603123431.GA53208(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0891 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0891.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 36446fd8595d5da4756548ddee55c2d6cea5276a2f4f7598d6fd260cd289d45c setuptool-1.19.9-4.el6.i686.rpm x86_64: e5784303d1779bc601a30eceb4621e27cb08a566c9aaa26edaa4ea1dd7ee8e25 setuptool-1.19.9-4.el6.x86_64.rpm Source: c3bd69242b65f88995c3b7395c1fd2088b366c07fcbef24b14e82b5c14789ca9 setuptool-1.19.9-4.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Mon, 3 Jun 2013 12:34:48 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0893 CentOS 6 selinux-policy Update To: centos-announce(a)centos.org Message-ID: <20130603123448.GA53327(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0893 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0893.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ed2e81c6e49bc95e9fc856e56ef5d556ce01a8320da3ddc473e93dc080d10f38 selinux-policy-3.7.19-195.el6_4.6.noarch.rpm ca73161d06dfc52932895e0e09f35ba0edece97ef152a61fd13c51c659a14fe5 selinux-policy-doc-3.7.19-195.el6_4.6.noarch.rpm 26bdf1b81f9cab8776559f7c5dfc3e35934c9d47ea7c0b7810e5e5401745dd74 selinux-policy-minimum-3.7.19-195.el6_4.6.noarch.rpm 9b49abbe0a66c428af17f494ae1caaadccc5330e805848d73d5a0b39d8859b1a selinux-policy-mls-3.7.19-195.el6_4.6.noarch.rpm a4d07b07952cd24b2f9265801ce215d4a5925aebb8560788c15471f30871ef4e selinux-policy-targeted-3.7.19-195.el6_4.6.noarch.rpm x86_64: ed2e81c6e49bc95e9fc856e56ef5d556ce01a8320da3ddc473e93dc080d10f38 selinux-policy-3.7.19-195.el6_4.6.noarch.rpm ca73161d06dfc52932895e0e09f35ba0edece97ef152a61fd13c51c659a14fe5 selinux-policy-doc-3.7.19-195.el6_4.6.noarch.rpm 26bdf1b81f9cab8776559f7c5dfc3e35934c9d47ea7c0b7810e5e5401745dd74 selinux-policy-minimum-3.7.19-195.el6_4.6.noarch.rpm 9b49abbe0a66c428af17f494ae1caaadccc5330e805848d73d5a0b39d8859b1a selinux-policy-mls-3.7.19-195.el6_4.6.noarch.rpm a4d07b07952cd24b2f9265801ce215d4a5925aebb8560788c15471f30871ef4e selinux-policy-targeted-3.7.19-195.el6_4.6.noarch.rpm Source: 79646b7d323685762c33a61b26648937de05ea39317ff41acfb6c4a76ca6be04 selinux-policy-3.7.19-195.el6_4.6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Mon, 3 Jun 2013 22:45:12 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0898 Moderate CentOS 5 mesa Update To: centos-announce(a)centos.org Message-ID: <20130603224512.GA32100(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0898 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0898.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 49122822eedbdd13ba7b1d680f51063154adde54959b2c3ccf2074ed5f2f0c57 glx-utils-6.5.1-7.11.el5_9.i386.rpm 89996ecbb3e50a020a6905f19e6218ebe3b41ddb46ae6199fb6da9fe6b54ed2f mesa-libGL-6.5.1-7.11.el5_9.i386.rpm 79020ce23423acbbe16d3a2bc55539de12c479544ceeae78f9f1387cae422418 mesa-libGL-devel-6.5.1-7.11.el5_9.i386.rpm e357c9406e9722f1a7f6a240128a31942cda596c6cc640b56f18122d5b70d8eb mesa-libGLU-6.5.1-7.11.el5_9.i386.rpm f4987ed4555a6490fc4d2a1a8409aa6d8d5e85b9caf083df5c9332099418cf2e mesa-libGLU-devel-6.5.1-7.11.el5_9.i386.rpm 2f77557f39e7e620d1fac84df078ce7a79e4580171317d1649b18fe6f4b23c40 mesa-libGLw-6.5.1-7.11.el5_9.i386.rpm 7096f36a4d960d574411d1d3e4c4e1642f4807bc7a634980045b1ce428f8606a mesa-libGLw-devel-6.5.1-7.11.el5_9.i386.rpm fdec08b6c0c4449d1af374f50ff41c10f69421a19f9db91272c0dcea4e546cfe mesa-libOSMesa-6.5.1-7.11.el5_9.i386.rpm 1ca226e6674f3b14bc1144dd67a0667c955e582c6e20f8069d339ae04bc4158c mesa-libOSMesa-devel-6.5.1-7.11.el5_9.i386.rpm 76f2304ed34c364648901a0382cfefc12ac5ebccaa838a12c4e417fb12d45a8f mesa-source-6.5.1-7.11.el5_9.i386.rpm x86_64: 9b12ff551e5a69f523613f3635ef91730d04b06f74a61c864ab20e63092d1eec glx-utils-6.5.1-7.11.el5_9.x86_64.rpm 89996ecbb3e50a020a6905f19e6218ebe3b41ddb46ae6199fb6da9fe6b54ed2f mesa-libGL-6.5.1-7.11.el5_9.i386.rpm 0aa84d570829032ef5101b335be2663ffd4764a2119b0b836ee8d88e6307bdbe mesa-libGL-6.5.1-7.11.el5_9.x86_64.rpm 79020ce23423acbbe16d3a2bc55539de12c479544ceeae78f9f1387cae422418 mesa-libGL-devel-6.5.1-7.11.el5_9.i386.rpm f9f9b8a79c0ff282dc45a357a9b71576f836fdea8cd55fd674d3e67cc0b6b51c mesa-libGL-devel-6.5.1-7.11.el5_9.x86_64.rpm e357c9406e9722f1a7f6a240128a31942cda596c6cc640b56f18122d5b70d8eb mesa-libGLU-6.5.1-7.11.el5_9.i386.rpm 22d3e0eb2c4ed006ef43b87332df7c05f066a9b21df08c2a0361609b4b07a686 mesa-libGLU-6.5.1-7.11.el5_9.x86_64.rpm f4987ed4555a6490fc4d2a1a8409aa6d8d5e85b9caf083df5c9332099418cf2e mesa-libGLU-devel-6.5.1-7.11.el5_9.i386.rpm aac5376318e0b52e7cb3aff6c12c68c01be0d3dc9415b16a35d0a1b41de75c5b mesa-libGLU-devel-6.5.1-7.11.el5_9.x86_64.rpm 2f77557f39e7e620d1fac84df078ce7a79e4580171317d1649b18fe6f4b23c40 mesa-libGLw-6.5.1-7.11.el5_9.i386.rpm c960c171b6feea2f593d0ae65ea34ebc134a3aee66339dd8d4ecf441492e7918 mesa-libGLw-6.5.1-7.11.el5_9.x86_64.rpm 7096f36a4d960d574411d1d3e4c4e1642f4807bc7a634980045b1ce428f8606a mesa-libGLw-devel-6.5.1-7.11.el5_9.i386.rpm 66a23e02a593099709a10760a644d4f6bd472abe2a9c35a8cb2b605a73cf5e62 mesa-libGLw-devel-6.5.1-7.11.el5_9.x86_64.rpm fdec08b6c0c4449d1af374f50ff41c10f69421a19f9db91272c0dcea4e546cfe mesa-libOSMesa-6.5.1-7.11.el5_9.i386.rpm f4c47c1d00f5bb382a191b3d6290f1cf041709988619349636916f3dca9edc13 mesa-libOSMesa-6.5.1-7.11.el5_9.x86_64.rpm 1ca226e6674f3b14bc1144dd67a0667c955e582c6e20f8069d339ae04bc4158c mesa-libOSMesa-devel-6.5.1-7.11.el5_9.i386.rpm 3da66f8f5ee59e2d68bfdd22c0e9921b1582b0606e1130ec29bd4678b1938a5b mesa-libOSMesa-devel-6.5.1-7.11.el5_9.x86_64.rpm be65dcebe4f326aad1791ac65a58d285f371ac6f47a17b3e240d0da25ccf1e5d mesa-source-6.5.1-7.11.el5_9.x86_64.rpm Source: 28fe60820ac9b7051fd865022adfd5a63d215c7b75ec5d0275594cbbc645cc6e mesa-6.5.1-7.11.el5_9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Mon, 3 Jun 2013 23:29:01 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0897 Important CentOS 6 mesa Update To: centos-announce(a)centos.org Message-ID: <20130603232901.GA6511(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0897 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0897.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 593fa4ebcae095c02f486fd0fdb9449fd4ac1e03bf26082f015177a34f146d72 glx-utils-9.0-0.8.el6_4.3.i686.rpm e8c4e7edec8a41eb3a8a5284dd90ec8a5b1eea677196747e1b352050b550d33c mesa-demos-9.0-0.8.el6_4.3.i686.rpm e634fc3b90b7222d121db2192697c59030e18fad3257b682a5a080ef97cdcddd mesa-dri-drivers-9.0-0.8.el6_4.3.i686.rpm c2fa021e0e2c92e772c26c79682e0be6da86a5d17016c2e1f27a33c5f5a71221 mesa-dri-filesystem-9.0-0.8.el6_4.3.i686.rpm 03f465504810bc7cfc58c843cc0218e1c6f254756f1715ecce717a370d65c3fa mesa-libGL-9.0-0.8.el6_4.3.i686.rpm 6890d6bcf2d317dbd2d540743f976f94a03732ede9ceb3519fe7a21bbe5ab952 mesa-libGL-devel-9.0-0.8.el6_4.3.i686.rpm 8e2e473fd5156f1cf1babd41703e1d5758dc26c8c038e3b247dbc4e5f8ff48c5 mesa-libGLU-9.0-0.8.el6_4.3.i686.rpm 5784dbeb45912450b85f9f3a36bf15171fb317ac34e00253d2f60c3bb85607ab mesa-libGLU-devel-9.0-0.8.el6_4.3.i686.rpm b53d35f0da1e5d36139bb464d7216a1c09a40180fa4b23dd368f5f48e029607f mesa-libOSMesa-9.0-0.8.el6_4.3.i686.rpm 009be5877f408918cf36938e469f790876d5e6363f23d8a02827d21938720893 mesa-libOSMesa-devel-9.0-0.8.el6_4.3.i686.rpm x86_64: cb6695915ebcfbfb8110971e42e037b249ef022f30e78d385b04836beb7632b9 glx-utils-9.0-0.8.el6_4.3.x86_64.rpm 4e8364f5ac1abae5fbc41dc33dd8b8c8d91bc5237d398654214ba8246cf6cc3c mesa-demos-9.0-0.8.el6_4.3.x86_64.rpm e634fc3b90b7222d121db2192697c59030e18fad3257b682a5a080ef97cdcddd mesa-dri-drivers-9.0-0.8.el6_4.3.i686.rpm 853c613b7ca795525d0e391c5549f9fd7474a9f5cf3f55e26e700b3e22ad0059 mesa-dri-drivers-9.0-0.8.el6_4.3.x86_64.rpm c2fa021e0e2c92e772c26c79682e0be6da86a5d17016c2e1f27a33c5f5a71221 mesa-dri-filesystem-9.0-0.8.el6_4.3.i686.rpm b913d7ab0ae55c764bb22627a2898279d952c82479b719c210a63be7cef5368b mesa-dri-filesystem-9.0-0.8.el6_4.3.x86_64.rpm 03f465504810bc7cfc58c843cc0218e1c6f254756f1715ecce717a370d65c3fa mesa-libGL-9.0-0.8.el6_4.3.i686.rpm d380d861c848c23719c96465051995611137cabd63501f54f48b865320bc545a mesa-libGL-9.0-0.8.el6_4.3.x86_64.rpm 6890d6bcf2d317dbd2d540743f976f94a03732ede9ceb3519fe7a21bbe5ab952 mesa-libGL-devel-9.0-0.8.el6_4.3.i686.rpm 2bf470a008ed79da61bc18f33f5c3d2a43d846efc401406b49b26898dba4037e mesa-libGL-devel-9.0-0.8.el6_4.3.x86_64.rpm 8e2e473fd5156f1cf1babd41703e1d5758dc26c8c038e3b247dbc4e5f8ff48c5 mesa-libGLU-9.0-0.8.el6_4.3.i686.rpm fbad4438403168f9fb54955f40cb36de8c24a8ea2f6af337e71fd45d49a08ee0 mesa-libGLU-9.0-0.8.el6_4.3.x86_64.rpm 5784dbeb45912450b85f9f3a36bf15171fb317ac34e00253d2f60c3bb85607ab mesa-libGLU-devel-9.0-0.8.el6_4.3.i686.rpm f3642776b44a6861257406bb9f8e66e433cca9e2f9a3b95e9588c4c6bc65db54 mesa-libGLU-devel-9.0-0.8.el6_4.3.x86_64.rpm b53d35f0da1e5d36139bb464d7216a1c09a40180fa4b23dd368f5f48e029607f mesa-libOSMesa-9.0-0.8.el6_4.3.i686.rpm 8db963ba7e3af3839ec0ee3062e3abd3601ddfa61830f5861b70946a19d62b65 mesa-libOSMesa-9.0-0.8.el6_4.3.x86_64.rpm 009be5877f408918cf36938e469f790876d5e6363f23d8a02827d21938720893 mesa-libOSMesa-devel-9.0-0.8.el6_4.3.i686.rpm efa0dd189c61762f925824cd6b001abd27c66944f55cb7754604bac06bfd332b mesa-libOSMesa-devel-9.0-0.8.el6_4.3.x86_64.rpm Source: 7ca6cd877d2916ddd5fce46e56c307534d8a573e67c2e96eb8d55224069b03b3 mesa-9.0-0.8.el6_4.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Mon, 3 Jun 2013 23:30:45 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0896 Moderate CentOS 6 qemu-kvm Update To: centos-announce(a)centos.org Message-ID: <20130603233045.GA6641(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0896 Moderate Upstream details at : http://rhn.redhat.com/errata/RHSA-2013-0896.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e97edfe3f7f53168e515ed246094d8815942d1f0398be50b0275650fc4d48d18 qemu-guest-agent-0.12.1.2-2.355.0.1.el6.centos.5.i686.rpm x86_64: 585d0b8e14824c397079fac85b4524099fbd96e6d8269c1f96f8a78bcaa555d3 qemu-guest-agent-0.12.1.2-2.355.0.1.el6.centos.5.x86_64.rpm 68401f77608c13049a0a45710d8ed34818fecfa1aa5eb6a7f66df049631b6b5f qemu-guest-agent-win32-0.12.1.2-2.355.0.1.el6.centos.5.x86_64.rpm 739a22239efcc7f63e5d6acecfcee1675c467db9a79b5302785ec60e05c2bd2f qemu-img-0.12.1.2-2.355.0.1.el6.centos.5.x86_64.rpm bfbee74d70e99cc51458a8f4818e3b2f7f023fde49a1db8b391f635227a7d9e4 qemu-kvm-0.12.1.2-2.355.0.1.el6.centos.5.x86_64.rpm 0e590bb25400f61e02003d011d577050f8c3e77634ef815f11d2e51151b5b922 qemu-kvm-tools-0.12.1.2-2.355.0.1.el6.centos.5.x86_64.rpm Source: ea3a5183c1105b4d5baf4f3cb393addfaae25339a51631804dffa561c9da1523 qemu-kvm-0.12.1.2-2.355.0.1.el6.centos.5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 100, Issue 1 ***********************************************

1 0

Need a Centos 6 USB hard drive recovery procedure
by Rock 03 Jun '13

03 Jun '13

My 15GB backup USB drive somehow got "corrupted" such that a "chkdsk /f E:" on WinXP removed the file allocation table (or whatever) making the NTFS drive appear empty. I tried Windows Recuva freeware to recover the files, and it has been working for 24 hours; but it has dumped about 65,000 files into a separate flat Windows directory. http://www3.picturepush.com/photo/a/12892041/img/12892041.jpg Since none of the files were deleted or written over, is there a method on Linux that will simply recover the missing file allocation directory structure instead of dumping a hundred thousand files into a single directory?

14 34

Where has system-config-sound gone?
by Ken Smith 03 Jun '13

03 Jun '13

Hi All, Just installed 6.4 on a system that might become a Myth Backend. Where's the normal sound icon gone that usually appears in Gnome? I can see the intel sound card driver is loaded. Which bits of alsa should be there? This is what I've got:- rpm -qa | grep alsa alsamixergui-0.9.0-0.9.rc2.el6.x86_64 alsa-utils-1.0.22-5.el6.x86_64 alsa-lib-1.0.22-3.el6.x86_64 Under System | Preferences Selecting the "Sound" icon gives a dialog box that says "Waiting for Sound System to respond" and the sound system never does respond. I bet I've got a zoo of stuff missing.... Any pointers most welcome Thanks Ken -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

3 4

OT: Script Help
by James Pifer 03 Jun '13

03 Jun '13

Sorry for the off topic, but don't a better resource. I'm not great at scripting, but need a quick script to modify a file. I have a long file that has lines like this: some text some text2 CN=DATA.OU=XYZ.O=CO some text3 some text4 And this repeats, but XYZ changes. "DATA" is always called data. (it's being renamed basically) I need to change the middle line but leave the rest of the file as is like this: some text some text2 CN=XYZ_DATA.OU=XYZ.O=CO some text3 some text4 Anyone know a quick way to do this? Any help is appreciated. Thanks, James

10 21

How to start the graphic services configuration?
by Norman Schklar 03 Jun '13

03 Jun '13

I don't see a menu option from the KDE window or a name in the install software.. Norm

2 2

6.4 failing to connect
by Beartooth 01 Jun '13

01 Jun '13

Why do I keep getting this, and what do I do?? The error message is Greek to me. :-{ [root@Hbsk ~]# yum update Loaded plugins: fastestmirror, refresh-packagekit, security Loading mirror speeds from cached hostfile epel/metalink | 13 kB 00:00 * c6-media: * epel: mirror.vcu.edu * remi: rpms.famillecollet.com file:///media/CentOS/repodata/repomd.xml: [Errno 14] Could not open/read file:///media/CentOS/repodata/repomd.xml Trying other mirror. file:///media/cdrecorder/repodata/repomd.xml: [Errno 14] Could not open/ read file:///media/cdrecorder/repodata/repomd.xml Trying other mirror. file:///media/cdrom/repodata/repomd.xml: [Errno 14] Could not open/read file:///media/cdrom/repodata/repomd.xml Trying other mirror. Error: Cannot retrieve repository metadata (repomd.xml) for repository: c6-media. Please verify its path and try again [root@Hbsk ~]# -- Beartooth Staffwright, Neo-Redneck Not Quite Clueless Power User Remember I have precious (very precious!) little idea where up is.

3 3

Frustrated. Java on Centos 6 doesn't give an error message when downloading from a Samsung Galaxy S3
by Rock 01 Jun '13

01 Jun '13

SUMMARY: Maybe this all boils down to "how do we debug when Java fails on Centos 6? DETAILS: If you don't have the Samsung Galaxy S3, then you might not realize how frustratingly difficult it is to transfer multiple files from the smartphone to Centos 6. It should be as simple as hooking up a USB cable and dragging and dropping (which it is, on most other smartphones, including the Samsung Galaxy S2, which has USBMS mode still intact). Note: I don't have a microUSB card, so that isn't an option and I have no desire to transfer the personal photos to the cloud just to get them from the phone to Centos, nor to install Wine and/or a virtuoal OS just to do something as simple as transfer files. On the Samsung Galaxy S3, you can go all day to Settings->More Settings-> but there is nothing for "USB" anywhere anymore. Unfortunately, [url=http://androidforums.com/computers/499522-looking- linux-file-transfer-tool-android-4-0-devices.html]Google has apparently disabled USB transfer in the Android OS 4.0[/url] and above and replaced it with MTP file transfer. So Windows recognizes any ICS device plugged in, and Mac does too (via Android File Transfer); but Centos does not. Anyway, [url=https://www.centos.org/modules/newbb/viewtopic.php? topic_id=39977&forum=57&post_id=182904#forumpost182904]the workaround[/ url], is to use Kies Air to transfer the files over the air via WiFi from the phone to the Centos PC. This works - but that brings up the problem of [b]multiple[/b] files. The Kies Air gui for transferring multiple files at once is trivial (you just check "all files"); but it doesn't work. There is no error message. There are no warnings. There are no indications whatsoever; it just doesn't transfer anything. If you use the exact same procedure to transfer a single file, it works just fine. Googling for "Kies air won't download multiple files", I find a bazillion others have this problem - but most answers simply say to "install Java" on the host PC. For example: http://www.samsung.com/uk/support/usefulsoftware/KIESAIR/JSP Q: I cannot send multiple files at once A: Need to install Java – downloadable from the Java homepage (www.java.com ) in order to transfer multiple files at once or to upload a file over 100MB. So maybe this whole frustrating task of downloading multiple files from the smartphone to Centos hinges on debugging Java. Here's where I'm lost though. I know nothing about Java. What does "install Java" mean for Centos 6? Is that icedtea? [b]Q: How can I get an error message if icedtea isn't working when I try to transfer multiple files via Kies Air?[/b] [img]http://www5.picturepush.com/photo/a/13140568/640/13140568.png[/img]

14 52

how to find unknown ip address?
by hadi motamedi 01 Jun '13

01 Jun '13

Dear All On my network, there is a node with unknown ip address so I do not know about its range and it can be any of the range xx.xx.xx.xx . Is there any tool on my centos server to find this unknown ip address (irrespective of the range of my centos server self ip range) ? Thank you

8 11

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss