Discuss

discuss@lists.centos.org

34758 discussions

Enable HT on CentOS 6.4 (Dell R720 64 Bit server)
by Kaushal Shriyan 24 May '13

24 May '13

Hi, I have HT Feature available on my Dell Server R720. Please help me understand if HT is enabled on the server, will there be a performance impact. What are the deciding factors to enable HT on the servers. Regards Kaushal

2 1

CentOS-announce Digest, Vol 99, Issue 12
by centos-announce-request＠centos.org 24 May '13

24 May '13

1 0

Changing disk UUID after cloning
by Glenn Eychaner 24 May '13

24 May '13

So, I have a CentOS 6 system, and I want to make several clones of it. I'm using Clonezilla to clone the drives; that's no problem. But the drive UUIDs are driving me up the wall. After cloning, the two drives have the same UUID, but I'd like each clone to have different UUIDs so there's no possibility of a conflict when I am running diagnostics with two drives installed, etc. But when I change the UUID of the /boot or / partition (even if I update /etc/fstab), the system won't boot; it GRUBs OK (after I use recovery mode to rerun grub-install), but never gets to the 'Welcome to CentOS " message. Do I need to "rebless" vmlinuz or initrd or initramfs in the /boot partition if I change the drive UUID? Or should I just ignore UUID and go back to using labels in /etc/fstab (which is what I did in CentOS 5)? Thanks, -G. -- Glenn Eychaner (geychaner(a)lco.cl) Telescope Systems Programmer, Las Campanas Observatory

5 4

CentOS-announce Digest, Vol 99, Issue 11
by centos-announce-request＠centos.org 23 May '13

23 May '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:0854 CentOS 6 vte Update (Johnny Hughes) 2. Release for CentOS-6.4 LiveCD and LiveDVD for i386 and x86_64 (Karanbir Singh) 3. CEBA-2013:0857 CentOS 6 qemu-kvm Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 22 May 2013 17:17:34 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0854 CentOS 6 vte Update To: centos-announce(a)centos.org Message-ID: <20130522171734.GA17174(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0854 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0854.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a5fd4ed13fc0a3ff83a7fec625875c7901033ca7995057cd7b0e9f181f9a023c vte-0.25.1-8.el6_4.i686.rpm 9cba8a558f58101effb64a11f42638039ac139c01cc37d10b579f8b64b6c7ad9 vte-devel-0.25.1-8.el6_4.i686.rpm x86_64: a5fd4ed13fc0a3ff83a7fec625875c7901033ca7995057cd7b0e9f181f9a023c vte-0.25.1-8.el6_4.i686.rpm 181ae90c9641e5c73bc945cf957914463950bfbd5a7ba775afc514453f47a015 vte-0.25.1-8.el6_4.x86_64.rpm 9cba8a558f58101effb64a11f42638039ac139c01cc37d10b579f8b64b6c7ad9 vte-devel-0.25.1-8.el6_4.i686.rpm 346172102f88fd0fcecbd2c0a808b7b5c60f5a0ff8de84598e8922ce1a54da9a vte-devel-0.25.1-8.el6_4.x86_64.rpm Source: 4f3e50988eda272b1e447fad62272f884b625c63b9ce02b146fde0c6d41b5a1e vte-0.25.1-8.el6_4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 22 May 2013 18:23:45 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] Release for CentOS-6.4 LiveCD and LiveDVD for i386 and x86_64 To: CentOS Announcements List <centos-announce(a)centos.org> Message-ID: <519CFF21.2050800(a)centos.org> Content-Type: text/plain; charset=ISO-8859-1 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 We are pleased to announce the immediate availability of CentOS-6.4 LiveCD and LiveDVD for the i386 and x86_64 architectures. Detailed Release Notes are available at http://wiki.centos.org/Manuals/ReleaseNotes/CentOSLiveDVD6.4 and http://wiki.centos.org/Manuals/ReleaseNotes/CentOSLiveCD6.4 +++++++++++++++++++++++ Overview The CentOS-6.4 LiveDVD and LiveCD are meant to be a Linux environment suited to be run directly from either Optical media or USB storage devices. It does not need any persistent storage on a machine, which also makes it a suitable recovery environment. The Live media are setup to run as full desktop environments and include most of the applications used in this role. +++++++++++++++++++++++ Download SHA256SUMs : 4677bb7d14f907e55936f991286c5d391519ada92428f71e82dac91b16bf671b CentOS-6.4-x86_64-LiveCD.iso 11822113016177b02bd80dbb35ae80f55db7b0590086b77bb661a4f7d40ee549 CentOS-6.4-i386-LiveCD.iso 1dee1e5f9df0278002b7da0279ed55afdf11abc5b889f4678ba43d70979e00f1 CentOS-6.4-x86_64-LiveDVD.iso 29e91fbfc30cab11661c38d767a0b1694cf57b994440575aa41b2c86a115e3e0 CentOS-6.4-i386-LiveDVD.iso The CentOS-6.4 Live media is released to all external mirrors and available for download now. List of mirrors is available at these urls : http://isoredirect.centos.org/centos/6/isos/i386/ http://isoredirect.centos.org/centos/6/isos/x86_64/ Due to the size of these DVDs, torrents have also been released and are being seeded at this time. The torrents are available at: http://mirror.centos.org/centos/6/isos/x86_64/CentOS-6.4-x86_64-LiveDVD.tor… http://mirror.centos.org/centos/6/isos/x86_64/CentOS-6.4-x86_64-LiveCD.torr… http://mirror.centos.org/centos/6/isos/i386/CentOS-6.4-i386-LiveDVD.torrent http://mirror.centos.org/centos/6/isos/i386/CentOS-6.4-i386-LiveCD.torrent Once you download the images, its important to verify contents using the sha256sum utility, against the published sums here. +++++++++++++++++++++++ Notes You can now install the Live environment to your hard disk (which wasn?t possible with the 5.x Live medias). Please note that you need more that 512Mb of ram to be able to use that ?install to hard drive? feature (If you have less than 512Mb of ram, you can install to disk but in text-mode, meaning that instead of clicking on the desktop icon, you have to launch a gnome-terminal and launch the ?liveinst? command from within the terminal) There is no upstream Live media product. The Live media produced within the CentOS Project is based on and around the livemedia tools from the Fedora Project. These LiveCD and LiveDVD only contains content found within the primary CentOS-6 distribution. No package from outside the distribution was included and no package has been changed from whats included in the base distribution. We appreciate all forms of feedback about these LiveDVD, including specific application inclusion requests or feature changes in future releases. The best place to provide this feedback is via the centos-devel mailing list ( http://lists.centos.org/ ) and feature requests via the issue tracker ( http://bugs.centos.org/ ). Enjoy! - -- Karanbir Singh, The CentOS Project +44-207-0999389 | http://www.centos.org/ | twitter.com/CentOS GnuPG Key : http://www.karan.org/publickey.asc -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlGc/yAACgkQMA29nj4Tz1tOKgCggp9eQI15zSoIJVn1e4pML4ku HAMAoKh+Ld5mu6ZvTTM2jteDfkElKDVH =IH0z -----END PGP SIGNATURE----- ------------------------------ Message: 3 Date: Wed, 22 May 2013 23:58:43 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0857 CentOS 6 qemu-kvm Update To: centos-announce(a)centos.org Message-ID: <20130522235843.GA31396(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0857 Upstream details at : http://rhn.redhat.com/errata/RHBA-2013-0857.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: fe27ea8edcd66481e96cc65daf5d69c26a06ce251f15ee056ac820b3bce3c8bb qemu-guest-agent-0.12.1.2-2.355.0.1.el6.centos.3.i686.rpm x86_64: 69d528adf214da22f2d0371b6ab15c77d8e99eafae63f9def9e269636d101b9b qemu-guest-agent-0.12.1.2-2.355.0.1.el6.centos.3.x86_64.rpm c83e3410c035ea6e4e88f16c5b26656ba84316e8c0260abd8a3de0bbbde78e8c qemu-guest-agent-win32-0.12.1.2-2.355.0.1.el6.centos.3.x86_64.rpm 5a69c850ef9e55380dcc3e0c2b72bb7f9c365384f9892b96ccb0ddf5b3421710 qemu-img-0.12.1.2-2.355.0.1.el6.centos.3.x86_64.rpm 69ba558a43a5dd5462c0cb3a174a98dc54f87eaba90cb7e5bc5fd224dc0948a4 qemu-kvm-0.12.1.2-2.355.0.1.el6.centos.3.x86_64.rpm 3db5c8273f775ff3bea5836dcc396f3e886e6489a7819fdaa1430b017a2267b1 qemu-kvm-tools-0.12.1.2-2.355.0.1.el6.centos.3.x86_64.rpm Source: 4f865077cef2fad1d44522e253f5a67f203a7d5a1085bc8030b0312ddb745442 qemu-kvm-0.12.1.2-2.355.0.1.el6.centos.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 99, Issue 11 ***********************************************

1 0

Re: [CentOS] Changing disk UUID after cloning
by Glenn Eychaner 22 May '13

22 May '13

On May 22, 2013, at 4:14 PM, Reindl Harald <h.reindl(a)thelounge.net> wrote: > Am 22.05.2013 21:58, schrieb Glenn Eychaner: >> So, I have a CentOS 6 system, and I want to make several clones of it. I'm using Clonezilla to clone the drives; that's no problem. But the drive UUIDs are driving me up the wall. After cloning, the two drives have the same UUID, but I'd like each clone to have different UUIDs so there's no possibility of a conflict when I am running diagnostics with two drives installed, etc. But when I change the UUID of the /boot or / partition (even if I update /etc/fstab), the system won't boot; it GRUBs OK (after I use recovery mode to rerun grub-install), but never gets to the 'Welcome to CentOS " message. Do I need to "rebless" vmlinuz or initrd or initramfs in the /boot partition if I change the drive UUID? > > for the inital boot /etc/fstab is *irrelevant* > logical thinking: if it can read it the partition is already mounted > > * at least GRUB config contains a line like "root=UUID=b935b5db-0051-4f7f-83ac-6a6651fe0988" Not on my system; CentOS 6 uses grub 0.97, and my grub.conf file doesn't contain any UUIDs that I can find. > * dracut / initramfs contains at least the UUID for /boot > * did yiou try "dracut -f" after the changes? That's probably the problem; I will make another attempt in the morning, if I decide that I care. I may simply decide that I don't care if I have duplicated UUIDs between workstations, if it becomes too much trouble to fix. :-) -G. -- Glenn Eychaner (geychaner(a)lco.cl) Telescope Systems Programmer, Las Campanas Observatory

1 0

CentOS source rpm repository setup
by Toralf Lund 22 May '13

22 May '13

Hi. I thought I might set up my CentOS 6 system with a source rpm repository config, so that I'll be able to download srpm files via "yumdownloader --source" or similar. I'm thinking that in order to this, I have to add something like the following to the yum repos config: [base-source] name=CentOS-$releasever - Base (SRPMS) baseurl=http://mirror.centos.org/centos/$releasever/os/SRPMS gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 #released updates [updates-source] name=CentOS-$releasever - Updates (SRPMS) baseurl=http://mirror.centos.org/centos/$releasever/updates/SRPMS gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6 The question is, what I specify as "baseurl"? The above does not actually work, as http://mirror.centos.org/ does not have SRPMS subdirectories, although I believe it did in the past for earlier versions. So, does anyone know of URLs I can use instead? Thanks, - Toralf This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

4 6

donneé un image iso de centos .merci
by jalila fattach 22 May '13

22 May '13

2 1

freenx not working with newly installed centos 6.4
by Natxo Asenjo 22 May '13

22 May '13

hi, this is not the same as http://bugs.centos.org/view.php?id=6298 I can login with ssh but not with freenx With 6.3 this worked, I just spinned some new servers and now I can no longer use freenx. in /var/log/messages: pr 3 22:05:11 testthuis nxserver[3435]: (nx) Failed login for user=admin from IP=192.168.0.160 Apr 3 22:06:01 testthuis nxserver[3619]: (nx) Failed login for user=admin from IP=192.168.0.160 Apr 3 22:06:52 testthuis nxserver[3818]: (nx) Failed login for user=admin from IP=192.168.0.160 in /var/log/nx/nxserver.log: -- NX SERVER START: -c /usr/bin/nxserver - ORIG_COMMAND= -- NX SERVER START: - ORIG_COMMAND= Info: Using fds #4 and #3 for communication with nxnode. HELLO NXSERVER - Version 3.2.0-74-SVN OS (GPL, using backend: not detected) NX> 105 hello NXCLIENT - Version 3.2.0 NX> 134 Accepted protocol: 3.2.0 NX> 105 SET SHELL_MODE SHELL NX> 105 SET AUTH_MODE PASSWORD NX> 105 login NX> 101 User: admin NX> 102 Password: Info: Closing connection to slave with pid 3761. NX> 404 ERROR: wrong password or login NX> 999 Bye My node.conf file is a copy of the node.conf.sample file, nothing changed. I do not want to use the nx database authentication but our ldap (ipa) authentication., this has always worked until now. I have temporarily set selinux in permissive mode but no difference. Can anyone else reproduce this? At work we have a mirror, so I tried at home with a manually installed centos and internet upgrades. No difference. TIA, -- Groeten, natxo

5 15

CentOS-announce Digest, Vol 99, Issue 10
by centos-announce-request＠centos.org 22 May '13

22 May '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2013:0847 Moderate CentOS 5 kernel Update (Johnny Hughes) 2. CEBA-2013:0846 CentOS 5 xen Update (Johnny Hughes) 3. CEEA-2013:0852 CentOS 5 rgmanager Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 22 May 2013 00:42:18 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0847 Moderate CentOS 5 kernel Update To: centos-announce(a)centos.org Message-ID: <20130522004218.GA2167(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0847 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0847.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ab5044367344e995cb1eae8cfae59c2b6df68a8366ab6830b1b7fff6311de88e kernel-2.6.18-348.6.1.el5.i686.rpm 098b89256fe94e488bc11c7d7d5c9c633f26e6ce2f556027cb6a4c09d83c6b1a kernel-debug-2.6.18-348.6.1.el5.i686.rpm 07934a3d05a145d04f3174247f261ec83865876335ec30735b690a16d2155ffc kernel-debug-devel-2.6.18-348.6.1.el5.i686.rpm 9844fb6c5aa44ab6c81d364f5297d0a79312be417eaff79e14fc857b198c00c6 kernel-devel-2.6.18-348.6.1.el5.i686.rpm c677268f2a1d2eb32508693ccef0813e236b12909e8b32a785ccb472d53740e0 kernel-doc-2.6.18-348.6.1.el5.noarch.rpm de801934133ee709e3c513299db6f9e5876767e6a00ac55928ecad7d9762fdcd kernel-headers-2.6.18-348.6.1.el5.i386.rpm fe04425d4d7c8314ab42b7601be855c02d79a94dbeb5badce6c701acc35c11e6 kernel-PAE-2.6.18-348.6.1.el5.i686.rpm ef9181b7ff77bce3f1bec28a5e37360b8e64932f44531bc66c83216699e7e7e6 kernel-PAE-devel-2.6.18-348.6.1.el5.i686.rpm 765cf57dab52afb57f18bb84cc354f11ae3fa264b9b157bf84914cacb6db2b83 kernel-xen-2.6.18-348.6.1.el5.i686.rpm 347a8b9e89eea05d6b53e1b30fa5569593d62282c16561aff945e1604c7e4465 kernel-xen-devel-2.6.18-348.6.1.el5.i686.rpm x86_64: 02a6c7c2f002543eb61596fc3b16a3cb4a8a9d97218adb4caa8f2482fa062a94 kernel-2.6.18-348.6.1.el5.x86_64.rpm 4d0acfe18f15a26f2d32274a03e2daee04c7cd14043de85348c3e50cc513b5b8 kernel-debug-2.6.18-348.6.1.el5.x86_64.rpm 750bd839ca73cf262309eec0a34b82a2e14e2a5a64f1ad6d67eea47a8b8c95de kernel-debug-devel-2.6.18-348.6.1.el5.x86_64.rpm 1a2351ac39b3080b13e0904b6de03e4daa604f428ffdd038ff53402531977e30 kernel-devel-2.6.18-348.6.1.el5.x86_64.rpm c677268f2a1d2eb32508693ccef0813e236b12909e8b32a785ccb472d53740e0 kernel-doc-2.6.18-348.6.1.el5.noarch.rpm 0e84f4daf0c476e555c6ebf1ff261bd44c5e72a5bbe75fe5f574abb3376f7de4 kernel-headers-2.6.18-348.6.1.el5.x86_64.rpm 2df8bbdbb154d41d699bfec546d64d4ce80fddee4800657cd4c7d981f2519bc0 kernel-xen-2.6.18-348.6.1.el5.x86_64.rpm 96add8d6aeaa2c3cfc8fa2ea93b8ced13230353fbef3025e850d7e3858e704c3 kernel-xen-devel-2.6.18-348.6.1.el5.x86_64.rpm Source: 79f0fd50d589af4bc5772082dfd03ac7a6f1e1954f930c8c18583a84c9afdd56 kernel-2.6.18-348.6.1.el5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 22 May 2013 01:26:35 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0846 CentOS 5 xen Update To: centos-announce(a)centos.org Message-ID: <20130522012635.GA3891(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0846 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0846.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ec631cb6cef6d16171547387d83540ee421f208c37e735064f03a4b61f920930 xen-3.0.3-142.el5_9.3.i386.rpm 52625a828dc04a4f501cad0e3e76c0f760a3934be4d079bad86c88b9ac730b1b xen-3.0.3-142.el5_9.3.i686.rpm a37c1d767aabc0be5a3510f2654ccccb7543fdfe31c9571d982f97666268674d xen-devel-3.0.3-142.el5_9.3.i386.rpm 81f01c550d014391e5008eae46189bee65229401ff197737cc4c7ecb1df7df16 xen-devel-3.0.3-142.el5_9.3.i686.rpm 558ccfff31589f7e2b46a501e9f730d7aea01b81941dd82746b49a4871c36abd xen-libs-3.0.3-142.el5_9.3.i386.rpm 6b1cd54270c7cedf43126b650d6cac68a7441badcaaed58639d439b0a7df8bc2 xen-libs-3.0.3-142.el5_9.3.i686.rpm x86_64: e98666d9db0a5110cc81e925a594ea7bda9a1a5e0fde99c521755db29ac92924 xen-3.0.3-142.el5_9.3.x86_64.rpm a37c1d767aabc0be5a3510f2654ccccb7543fdfe31c9571d982f97666268674d xen-devel-3.0.3-142.el5_9.3.i386.rpm 5feb695b37fd5dde27d223b55fcdf8437321f63f4cf6a228356b77e7ab4024a0 xen-devel-3.0.3-142.el5_9.3.x86_64.rpm 558ccfff31589f7e2b46a501e9f730d7aea01b81941dd82746b49a4871c36abd xen-libs-3.0.3-142.el5_9.3.i386.rpm 1d3f7879976677794109e382f561a36452e02035bb037b897f62e8d3861b0496 xen-libs-3.0.3-142.el5_9.3.x86_64.rpm Source: 9dbfd13241c4e3249f424d32ed6526e2b3662d969f3518dab3287b92926ae32b xen-3.0.3-142.el5_9.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Wed, 22 May 2013 11:50:54 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2013:0852 CentOS 5 rgmanager Update To: centos-announce(a)centos.org Message-ID: <20130522115054.GA3369(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2013:0852 Upstream details at : https://rhn.redhat.com/errata/RHEA-2013-0852.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 1c3221b07eb1f14878c380a15e89e9467121295070034d3e3b45175e918bda9f rgmanager-2.0.52-37.el5.centos.2.i386.rpm x86_64: 4b8b522fb08f2002f9a407bc40f4e5bda7d17d22d25847de64c1643408d5ce85 rgmanager-2.0.52-37.el5.centos.2.x86_64.rpm Source: 6a4c446af0a5f6fde288b3385adae0fcaf02b2a4bb4001dd0b3d17b451656bd7 rgmanager-2.0.52-37.el5.centos.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 99, Issue 10 ***********************************************

1 0

Re: [CentOS] Centos 6.4: Possible bug in system-config-network-cmd
by Glenn Eychaner 21 May '13

21 May '13

m.roth: > Hmmm... have you looked at /etc/udev/rules.d/70-persistant-net.rules? # PCI device 0x8086:0x104b (e1000e) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:16:xx:xx:xx:xx", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" # PCI device 0x10b7:0x9200 (3c59x) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:04:xx:xx;xx:xx", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" Not sure there's anything relevant there... -G. -- Glenn Eychaner (geychaner(a)lco.cl) Telescope Systems Programmer, Las Campanas Observatory

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss