Discuss

discuss@lists.centos.org

34758 discussions

Configuring source-specific routing
by Michael Mol 04 May '13

04 May '13

I'm attempting to configure source-specific routing so that my servers can exist on multiple subnets from multiple upstream providers. A rough diagram of the network layout: ISP1 router (blackbox, routes subnet A, address on subnet A) \ -----------eth0(firewall)eth1---((servers)) / ISP2 router (blackbox, routes subnet B, address on subnet B) The aim is to allow the servers to use both subnet A and subnet B. To allow this, any machine on both subnets must have source-specific routing configured, else packets originating from one ISP's AS will be directed at the other's router, and neither ISP cares for that. At the moment, I'm focusing on getting the second ISP properly added to the firewall box. The firewall box is using CentOS 6.4, and normally passes traffic back and forth via proxy_arp. None of my interfaces are NM_CONTROLLED, and NetworkManager is not installed, much less started. I've created a route-eth0:1 file that looks roughly like this: 10.0.0.1 dev eth0:1 \ src 10.0.0.2 \ from 10.0.0.0/29 default via 10.0.0.1 dev eth0:1 \ src 10.0.0.2 \ from 10.0.0.0/29 (Treat indented lines as continuations of the previous line) (No, the ISPs aren't giving me RFC1918 addresses; these are redacted.) If I run "ifup eth0:1", "ip route show" includes the lines: 10.0.0.1 dev eth0 scope link src 10.0.0.2 10.0.0.0/29 dev eth0 proto kernel scope link src 10.0.0.2 default via 10.0.0.1 dev eth0 Note that the "from 10.0.0.0/29" clause is missing. With the addition of a second default route on my firewall/gateway without any restriction on which traffic should go that way, my whole network, of course, tanks. I'm surprised it's been such a pain; I would have expected it to be a relatively common configuration. What's the proper way of doing source-specific routing on CentOS?

7 22

Kickstart and volume group with a dash in the name
by Dennis Jacobfeuerborn 03 May '13

03 May '13

Hi, I'm trying to setup the provisioning of new OpenStack hypervisors with cinder volumes on them. The problem is that kickstart doesn't allow dashed in volume group names? I tried this: volgroup cinder-volumes --pesize=4096 pv.02 and this: volgroup cinder--volumes --pesize=4096 pv.02 but in both cases I end up with a volume group named "cindervolumes" on the system. Any idea what I have to do to accomplish this? Defining VGs with dashes works perfectly fine on the command line. Regards, Denis

6 6

I Know It's A Stupid Question......
by Eddie G. O'Connor Jr. 03 May '13

03 May '13

........But I'm trying to give my son a "cool-yet-kind-of-geeky" 13th Birthday Present......he hinted he liked the CentOS logo, but where would I find things that are branded with it?....searching the web doesn't really help me much, only because I'm not sure what I need to be looking for...any help would be greatly appreciated! Thanks in advance!! EGO II

5 4

AT-2972SX
by Ray Van Dolson 02 May '13

02 May '13

Anyone know off the top of their heads if this (AT-2972SX) fiber network card will work out of the box with CentOS 6.x? Sounds like it's a Broadcom-based card, so perhaps it will, or maybe something exists for it in elrepo? Hoping to avoid needing to build custom drivers from source. Ray

2 5

trying to recover an audio CD...
by Fred Smith 02 May '13

02 May '13

I'm trying to recover data from an audio cd. it is a recording of a live session, made on a professional cd recorder, on the fly. apparently, instead of stopping it and fixating the disc, someone turned off the power. oops. I know that wodim will fixate a disk as long as it was otherwise properly terminated (I've done it more than once), but this one it won't fixate. depending on the drive I try it in, I get different messages, but in either case, it remains unfixated. so i've tried reading it with cdparanoia, but it can't do anything with it, or not that I've figured out how to do. So, can anyone suggest ways to try to recover this audio data? thanks! -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ---------------------------- Do you not know? Have you not heard? The LORD is the everlasting God, the Creator of the ends of the earth. He will not grow tired or weary, and his understanding no one can fathom. ----------------------------- Isaiah 40:28 (niv) -----------------------------

4 4

lxde
by Scott Robbins 02 May '13

02 May '13

Sorry, I accidentally deleted the lxde thread, (on mail where I just use POP3) so headers may be broken for some of you. Anyway, ScientificLinux forums have a post about building lxde. It is time consuming, but if you really want it.... It's using Fedora 14 as the version and has links to necessary rpms. http://scientificlinuxforum.org/index.php?showtopic=759 -- Scott Robbins PGP keyID EB3467D6 ( 1B48 077D 66F6 9DB0 FDC2 A409 FA54 EB34 67D6 ) gpg --keyserver pgp.mit.edu --recv-keys EB3467D6

6 6

CentOS Dojo at Phoenix, AZ on the 10th May 2013
by Karanbir Singh 01 May '13

01 May '13

Hi, The second CentOS user interaction Dojo is taking place at Phoenix, AZ, USA on the 10th May 2013. And once again, we have a great line up of speakers covering a broad spectrum of technologies that people running CentOS usualy care about most. For details on the speakers, the topics and the venue : http://wiki.centos.org/Events/Dojo/Phoenix2013 The early bird ticket sales end on the 30th Apr, so if you can make it - be sure to register early ( You can register now at http://centosdojophoenix.eventbrite.co.uk/ ) The plan is to start at 9:00 with the sessions starting at 9:30, and a nice long lunch break in the middle, with evening BoF sessions and maybe even open spaces for people to interact and talk about the things they care about most : And I'll be fielding any questions that anyone had about and on CentOS, the project as well as CentOS Linux, the distribution. Note: This is a not for profit event, all ticket sales revenue is cycled back into paying for attendee t-shirts, catering at the venue and costs for the event itself. Looking forward to seeing some of the mailing list regulars on the day. - KB -- Karanbir Singh +44-207-0999389 | http://www.karan.org/ | twitter.com/kbsingh GnuPG Key : http://www.karan.org/publickey.asc

4 5

flashing a BIOS on an HP server
by m.roth＠5-cent.us 01 May '13

01 May '13

Hi, folks, Since I've gotten a total of one response in days on the HP forum, maybe the collective mind here has an answer.... As I've mentioned in other posts, we have an HP dl580 g5 that started throwing ECC errors. But wait, it's worse: memory is mirrored.... And the thing is fully populated with 32 DIMMs. I took my best guess, pulled the matching set of DIMMs, and took two off of one of the four riser boards to replace them. I find that the m/b *must* be fully populated before adding riser boards... *and* the riser boards are mirrored. So I had to pull two riser boards, the one I'd taken two DIMMs off of, and it's mirror. Brought it back up, no errors. Then, Monday, I tried replacing one of the two, apparently good riser boards with one that I'd taken out, and had put the two DIMMs that I was guessing included the bad one. I *still* can't provoke the error. Maybe it only happens when I have everything fully populated? (I've run stress to the point where all 2G of swap is used....) Meanwhile, I'd joined an HP forum, and someone suggested that I really, really needed a BIOS update, and that would fix it. Sounds plausible. However, when I found the d/l of that, I ran into three things: first, the damn thing was an .exe, and they do *not* seem to have a .bin. Second, the "description" (laughable, at best) didn't seem to say anything about ECC errors, but whatever. Then there's the biggie: it *seems* to say that I have to install a previous BIOS update first... but I'm not sure. I would have thought it was a full package. Now, as the system is long out of warranty, and there's no way the other Institute will spring to pay HP, they won't even talk to me about *anything*, so I'm on my own. The upshot: does anyone here have a clue as to whether I can flash update the BIOS with the latest update, or whether I actually have to do the older one first? Thanks in advance. mark

8 13

CentOS-announce Digest, Vol 99, Issue 1
by centos-announce-request＠centos.org 01 May '13

01 May '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:0781 CentOS 6 perl Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 30 Apr 2013 14:33:07 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0781 CentOS 6 perl Update To: centos-announce(a)centos.org Message-ID: <20130430143307.GA7038(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0781 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0781.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: f0a50f66e46cc73eea3a5565e5e5e892e088792de2a1f8165163492d7be63602 perl-5.10.1-131.el6_4.i686.rpm 4144c9010ede176aefa5e29bee72645fd77a250fb96879803a84331960f0b56b perl-Archive-Extract-0.38-131.el6_4.i686.rpm 2299f96a517221d892e0bba4d6fd36c6b5becdbc451f1b124aeef82f98c3626e perl-Archive-Tar-1.58-131.el6_4.i686.rpm d5b508375bec0e77299bb7047aee66c667aef9746e2de203ec482b77d1e1bdf5 perl-CGI-3.51-131.el6_4.i686.rpm 023f24c5b51a74c79c56ee5d18f2bdc09ef5f21cd734a3b34f6feb34f50ef9f9 perl-Compress-Raw-Bzip2-2.020-131.el6_4.i686.rpm 66c3a56e1e2e25911f50e8e4780a2ee6e3a432012beb1044604e41678bae793e perl-Compress-Raw-Zlib-2.020-131.el6_4.i686.rpm 102b14b8196c5852c8d5c8ca731f65fe76c5712764841601cf1a85e7f05cc2a4 perl-Compress-Zlib-2.020-131.el6_4.i686.rpm 66e5aba9c5ace6261f18016c6e2a6bc85e18324c5063224be3362e684889e9eb perl-core-5.10.1-131.el6_4.i686.rpm 07bd483b690228b7bd29434ef77dc57b2b072c3b62f1ba3ae7bc28f0a2df53ed perl-CPAN-1.9402-131.el6_4.i686.rpm 9f65a42c201b3d7e93b22cd90773daefcf3175bbb79c3c1edbe115a9c3cda65b perl-CPANPLUS-0.88-131.el6_4.i686.rpm e2bbfa8d71d89e843d7f9ce238e7374e8fe3959692acfce0398ae5926505a9de perl-devel-5.10.1-131.el6_4.i686.rpm 9561f015f62e62975eab011ea1d2d8befbb482a3bc0fa22e27dd30f21d894480 perl-Digest-SHA-5.47-131.el6_4.i686.rpm bfa2886bd96e8d18a98f5cf4d408e01b64f68b90e44d9a4ae0e410612d6cbbb5 perl-ExtUtils-CBuilder-0.27-131.el6_4.i686.rpm eedd337178adac22cfbf66579a546eb18429983683121f1ff6439d274f4fecd7 perl-ExtUtils-Embed-1.28-131.el6_4.i686.rpm 8aafb9b42266b081dddd052c78aa8229a720326e3116893ec4c1a1248be51f32 perl-ExtUtils-MakeMaker-6.55-131.el6_4.i686.rpm e747f84611e5063096d8dde995aecdefc3966441d45c2477655a6bec3cf80a60 perl-ExtUtils-ParseXS-2.2003.0-131.el6_4.i686.rpm 93841ed7f9a12647b1a477a449f6be278ccc80805fd361e97145cf89b2f26b26 perl-File-Fetch-0.26-131.el6_4.i686.rpm 24ddfac33694aa3d58e3e6a7b6e4aa28c19187c070a3613527da19c9aad56a8b perl-IO-Compress-Base-2.020-131.el6_4.i686.rpm 63e7f3ed4fb918c19c959586e50b677d86207bee3c51709969bdb66c2ae99dad perl-IO-Compress-Bzip2-2.020-131.el6_4.i686.rpm 2a471c656cc9fed06e0fbfc3bf8494948f81a111c90a0116cfa4bd2469df93cd perl-IO-Compress-Zlib-2.020-131.el6_4.i686.rpm 1664652e566917cdefb551c55fa0a6c66e9d58b5d20d3c94a7414b557e4745e1 perl-IO-Zlib-1.09-131.el6_4.i686.rpm a769da23d72cf3050df10bd85adcc06123a5d19d4552d23903f4bdf37d0d21b9 perl-IPC-Cmd-0.56-131.el6_4.i686.rpm 45d19f80b9078bd78dbd9306a77213cf917b5e51024c0b6549d78d1efc699e1e perl-libs-5.10.1-131.el6_4.i686.rpm 3b49409fd73c9baac1349d8b5f0dc48b0e2ad4de2704e590a3e9fa178ad6a5ec perl-Locale-Maketext-Simple-0.18-131.el6_4.i686.rpm 249ecdc9fd1e0a22aa6520f6e8ed946578ec93c5638dcf69aa686d2ba4cefb8f perl-Log-Message-0.02-131.el6_4.i686.rpm 3ab5bfc2443670cf22a60c20d674a2e2764399d281ea62c2622bdf8047b78c2d perl-Log-Message-Simple-0.04-131.el6_4.i686.rpm 5a62c0567a5e97c2da4e28edfde4d39a8f90293c782a189d049a3ee49a4f13c8 perl-Module-Build-0.3500-131.el6_4.i686.rpm 1a171e3b8310b7d7e01f6cfecfd757ad9a65e6ce08efc6f980d7c9dfb4d2e786 perl-Module-CoreList-2.18-131.el6_4.i686.rpm e84b680ff75cf24390ec15a91307af9cd8d02d39470351d370bbfa109174b60a perl-Module-Load-0.16-131.el6_4.i686.rpm 9951224e7489542c0b5b9fa8615cd83a98abf88a7b60ce1f9969c0b6ff672e65 perl-Module-Load-Conditional-0.30-131.el6_4.i686.rpm c6cf1d7305985516f66618228fb027820bcc6c3fad0a1b16fb30e3648958d6c1 perl-Module-Loaded-0.02-131.el6_4.i686.rpm 48fd44a4401167417a22f79994fa86198e7bbe31117f60768d17bf477fbe6dc0 perl-Module-Pluggable-3.90-131.el6_4.i686.rpm 726879ee1f179839ab77b9385f901bc6707a81ccc2ddcdb260999bfd70eb1b11 perl-Object-Accessor-0.34-131.el6_4.i686.rpm 997bc7ed17b88be5285887fd3009a8cd42ca92e5c9032fc8effc02ebaa0d1132 perl-Package-Constants-0.02-131.el6_4.i686.rpm f09c4a85272ea98b20b4fc95021b211f5c3233f47ba477c71b6276f817bf80c8 perl-Params-Check-0.26-131.el6_4.i686.rpm 85aeef5c540847b1a2facdbf2ad50ab50e902b909d1d98eb50497e87da87d9cd perl-parent-0.221-131.el6_4.i686.rpm a5b9796a9eb6416159d001dbe44026942310e5ad16c33e514021041b7d376c77 perl-Parse-CPAN-Meta-1.40-131.el6_4.i686.rpm 8268c8d271f821a65dfd24ef4f1d818048d51ca62e3358b672c203d12a2987cc perl-Pod-Escapes-1.04-131.el6_4.i686.rpm 6672e3d771fdbdce128a5193bb266f25f74dc4d0341c1b8162696dffe123984e perl-Pod-Simple-3.13-131.el6_4.i686.rpm 2f54bdc0006d0f88625719e94e12cb700f7a3947780bc8b52cede954eeadd273 perl-suidperl-5.10.1-131.el6_4.i686.rpm 3a614fd2dfe606c117b03f9e80bfe59ecbeddb936466f8034dda6103fa1466d3 perl-Term-UI-0.20-131.el6_4.i686.rpm f19b99eefe66c80c240f2aca9f5bef964c8acbde1ba5b23a62cd2f39618f1c46 perl-Test-Harness-3.17-131.el6_4.i686.rpm dd20dce8950826f318bdfb9bcd4df758b3cc7fa8bf86e9246cdb08008d831da5 perl-Test-Simple-0.92-131.el6_4.i686.rpm 69c55d644dca10fc85f418ff6ba9e0b260e3c1dfd049e1cb638de994a08aef47 perl-Time-HiRes-1.9721-131.el6_4.i686.rpm b8e0ee24c15bc6630082787a61fbeaaf604c909b70f6acd41cd81f850af66a88 perl-Time-Piece-1.15-131.el6_4.i686.rpm 0cbbfcb53a7a7acac947eaab6e3534f58b2295062953229affd09babae201b75 perl-version-0.77-131.el6_4.i686.rpm x86_64: 3ee68cc1da2252ae33db6b9187e73e8a40df0bb629647c4d475c522ea4271b04 perl-5.10.1-131.el6_4.x86_64.rpm d8fe422a46cf0983f5157f2d7c9932b0d943473a05c2ee8295e47d986b2ff0c4 perl-Archive-Extract-0.38-131.el6_4.x86_64.rpm b1bd2d2efc870aa24e2ed88b60b1608709c2b6a933450f050b521eea4c2c81d3 perl-Archive-Tar-1.58-131.el6_4.x86_64.rpm a530f886fb5428239ed3087ac426f5cf1f456e35e2d9539416477ead814e9049 perl-CGI-3.51-131.el6_4.x86_64.rpm 19d2693a82d05b1a70770d8185394edc47a4fdc2cd337ab52994d5f8d8544182 perl-Compress-Raw-Bzip2-2.020-131.el6_4.x86_64.rpm 1e0833439580fcb77f3e2e5f6f9279394dde7078a6638e25e7b2665279f48f5e perl-Compress-Raw-Zlib-2.020-131.el6_4.x86_64.rpm bcf34cd504fffa32d47c9eae3dca546de57e23d1badaed1de0a6cdb977837e04 perl-Compress-Zlib-2.020-131.el6_4.x86_64.rpm df7c2b71a87476037d2a31db2e47a075cad376e224a7bfc06dcfa881f6751492 perl-core-5.10.1-131.el6_4.x86_64.rpm f43cb5513974196c15b2e5eeb474d79ff906acdea9524fcfd927d82730d370f1 perl-CPAN-1.9402-131.el6_4.x86_64.rpm 0d21f34da2a7551eef3bede7c82636723a8740f066e15571369b7192b3c23afd perl-CPANPLUS-0.88-131.el6_4.x86_64.rpm e2bbfa8d71d89e843d7f9ce238e7374e8fe3959692acfce0398ae5926505a9de perl-devel-5.10.1-131.el6_4.i686.rpm 2113a684d17386ad74f7e63205a68c0d8d6b5497d1d0ae181b9d3ef95d7fc483 perl-devel-5.10.1-131.el6_4.x86_64.rpm ad4ce9654618ebcf46607e249528d327e51b2a6170879e30a40fb1973bc98ebc perl-Digest-SHA-5.47-131.el6_4.x86_64.rpm 1214f7b9f6ff3f6f820e4e4a4615eaeed6c7361f49c65514c841a0d44947f284 perl-ExtUtils-CBuilder-0.27-131.el6_4.x86_64.rpm 5ca76e5e83f9d9a8d774a179f45f34c1336f64b4129cb0d41182bb0ee5b636aa perl-ExtUtils-Embed-1.28-131.el6_4.x86_64.rpm ac8f067cf9ca65f985ce632be09e1c1996205ee7497049f218252292f93a65b7 perl-ExtUtils-MakeMaker-6.55-131.el6_4.x86_64.rpm b4a693abbe9b03ebcd5575ae356badc89c95a20a80ed1d1240a5be9c3dc0715f perl-ExtUtils-ParseXS-2.2003.0-131.el6_4.x86_64.rpm af730bf36396643f625ecf45d578e8a4582073fc8451a37dc3eeec7cd56a78a7 perl-File-Fetch-0.26-131.el6_4.x86_64.rpm 18344620ced1794a81ea46d1a9dacc9c8d2b2b92c2001de9a959ba2a95e37a9c perl-IO-Compress-Base-2.020-131.el6_4.x86_64.rpm 7a954ea89fe4849ab8186e7a37bc66c93993caa83dea64c9fb2d63a804173c8a perl-IO-Compress-Bzip2-2.020-131.el6_4.x86_64.rpm 8047169d80531e130be8ef96b285843e6668749fc5314448abd3885d29ae1acb perl-IO-Compress-Zlib-2.020-131.el6_4.x86_64.rpm ff6b34b7c924b8181b2e63b4f3d93263b8d4781544b43420fb4c87dac21beb09 perl-IO-Zlib-1.09-131.el6_4.x86_64.rpm 9fb5c2fdaeb3698eae086f0cce8cbb2da1d91a78f228b9c12804d1560bfcbd11 perl-IPC-Cmd-0.56-131.el6_4.x86_64.rpm 45d19f80b9078bd78dbd9306a77213cf917b5e51024c0b6549d78d1efc699e1e perl-libs-5.10.1-131.el6_4.i686.rpm c319c3414536d6309525cc809914d7296c122a998a3577bc73f529407ea4a32f perl-libs-5.10.1-131.el6_4.x86_64.rpm a331b98d0b5e5a5c17d9e455dcad8989d1f1a12f5c32f50b9b755c19516c3a50 perl-Locale-Maketext-Simple-0.18-131.el6_4.x86_64.rpm 119f0d0b926af41bda37908f739ce2171310d3255f3c4a89bd59e5a4c44c7779 perl-Log-Message-0.02-131.el6_4.x86_64.rpm 30a53937256365e6443f3cb334c626e91c8b7b1e363e80cc5011f0a44a612c55 perl-Log-Message-Simple-0.04-131.el6_4.x86_64.rpm 0eb455b54d7e53301c2f434a9b201e57d47ba6a5e61fb51a2a84ecc597e7766a perl-Module-Build-0.3500-131.el6_4.x86_64.rpm 2fde9787f8c1e3e6569113aa716f8a42c0d01b86461e7fe30888e664b6191f1d perl-Module-CoreList-2.18-131.el6_4.x86_64.rpm 14a93bbfa55de8b3b19465f28d1032fd933348482eea867c0ca4e2e075596b9a perl-Module-Load-0.16-131.el6_4.x86_64.rpm f5bd3dbdf1f13e8ae904fdc0316820f6c470e14275dceea626869e4781eff7ff perl-Module-Load-Conditional-0.30-131.el6_4.x86_64.rpm 580ab065a86f46f32e75a4ad6fa17b7aa76af7a6e3d0e0f6a4af0bbda93e2a7e perl-Module-Loaded-0.02-131.el6_4.x86_64.rpm 6ea66f6bf345dc82a6708e950c275c0215a3a439b8ac087e0ea124a5bee676d3 perl-Module-Pluggable-3.90-131.el6_4.x86_64.rpm dad1cfe704a2577fcf3e82748b42fcdbfc9f07ba3194227b6b9b59b39e9203c0 perl-Object-Accessor-0.34-131.el6_4.x86_64.rpm 48b34692cee71b641aa89a37431d0dce33c43d7a3f9645747b22011579dc6ab3 perl-Package-Constants-0.02-131.el6_4.x86_64.rpm 64fd857e54aba7ab30574309cff1f9fcf235813af0b77ced4ab2ab78bcd9ecff perl-Params-Check-0.26-131.el6_4.x86_64.rpm 8f42472260442fd9972a4393c53f43a92fd927b429ca8ac52e83d5478d38c7dc perl-parent-0.221-131.el6_4.x86_64.rpm f0777666360084b7d6a6683de0fda5879f98214369b1d9e3ed60fbb3d3fca4ec perl-Parse-CPAN-Meta-1.40-131.el6_4.x86_64.rpm 8b0a0ab199f92a5a8831e4177c605b88f632e85600c764c3b21a1788f7c67292 perl-Pod-Escapes-1.04-131.el6_4.x86_64.rpm 7afbdd2a2b340b184f47a3be60d45a222df7f51619192b5ed3e76f54c94c6142 perl-Pod-Simple-3.13-131.el6_4.x86_64.rpm e6fd2ab6ab31a1c4cd8dac7f441b7d5be359c48e42d4693087e0bccbb50fdfaf perl-suidperl-5.10.1-131.el6_4.x86_64.rpm 9d07c0e1011b624ee8be26d93f6b17aa9a93a9588cb5b242d207923da2949fea perl-Term-UI-0.20-131.el6_4.x86_64.rpm b003be227116bf4b0b0c7c27b4dad92afd79789d426e934b9fff76d88f39e4bd perl-Test-Harness-3.17-131.el6_4.x86_64.rpm bf9bd525af2913a05bab525c4a8293fc8001c060f5c1702b8f92b261f5b3070f perl-Test-Simple-0.92-131.el6_4.x86_64.rpm fe440b20b8c53860a73ffc30b0ece72def86f417f3c8849827bf5a666da1edd3 perl-Time-HiRes-1.9721-131.el6_4.x86_64.rpm b5bfc10298e3128895b8f395ff54348ce84d4daafb7a04b063617beb476d9536 perl-Time-Piece-1.15-131.el6_4.x86_64.rpm eee12fa6e0d0d6e6669c56da9aedea33f05f69cb98da245e7172504042eba093 perl-version-0.77-131.el6_4.x86_64.rpm Source: 38e2e272692b5e58f7226f5cae610632dadf76b1a05d21c72f343089ce82ca28 perl-5.10.1-131.el6_4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 99, Issue 1 **********************************************

1 0

Re: [CentOS] Apache stops without evident cause
by James B. Byrne 30 Apr '13

30 Apr '13

On Mon, April 29, 2013 09:02, James Hogarth wrote: >> It is just the httpd service that stops. > > Define 'stops' Attempts to access the web sites served by that service report Server not Found. Running 'service httpd start' starts the service. > > Are there any httpd processes still running? No. > > What are you doing with the server - php, proxy to tomcat, etc Straight-up static web sites. Nothing fancy or dynamic. No CGI scripts. > > There's very little information to go on in your post... > > You have what I have. There is simply no trace of the process by the time my periodic (every 15 minutes) sweep notices that the httpd process is gone and restarts it. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

5 5

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss