Discuss

discuss@lists.centos.org

34758 discussions

CentOS 6.4 kickstart bonding
by Baptiste AGASSE 20 Mar '13

20 Mar '13

Hi all, Someone played with kickstart bonding with centos 6.4 ? CentOS 6.4, as upstream now support ifcae bonding in kickstart network section. I've an issue with configuring a second bonding iface in kicstart on CentOS 6.4. The first bonding (bond0) works as espected but the second is not configured during installation. I've a 6 nic server (two for "puclic" network, two for cluster network, two for iscsi network) here is my "network" kickstart section: # "Public" network, bond0 created, it works fine, network --device=bond0 --noipv6 --bootproto=static --onboot=yes --hostname=box.example.com --ip=192.168.1.3 --netmask=255.255.255.0 --gateway=192.168.1.1 --nameserver=192.168.1.1 --bondslaves=p1p1,p1p2 --bondopts=mode=active-backup,primary=p1p1,miimon=80,updelay=60000 # Cluster network, not created on install network --device=bond1 --noipv6 --nodns --nodefroute --bootproto=static --onboot=yes --ip=192.168.2.2 --netmask=255.255.255.0 --bondslaves=em1,em2 --bondopts=mode=active-backup,primary=em1,miimon=80,updelay=60000 # ISCSI network network --device=p1p3 --noipv6 --nodns --nodefroute --bootproto=static --onboot=yes --mtu=9000 --ip=192.168.3.1 --netmask=255.255.255.0 network --device=p1p4 --noipv6 --nodns --nodefroute --bootproto=static --onboot=yes --mtu=9000 --ip=192.168.3.2 --netmask=255.255.255.0 # bond slave network --device=em1 --noipv6 --nodns --bootproto=static --onboot=yes # bond slave network --device=em2 --noipv6 --nodns --bootproto=static --onboot=yes # bond slave network --device=p1p1 --noipv6 --nodns --bootproto=static --onboot=yes # bond slave network --device=p1p2 --noipv6 --nodns --bootproto=static --onboot=yes when i check anaconda-ks.cfg on the installed host, the second bonding iface (bond1) is not present. No error displayed during install or present in install log files on installed hosts. Maybe Have a nice day. Regards. Baptiste.

1 0

CentOS-announce Digest, Vol 97, Issue 11
by centos-announce-request＠centos.org 20 Mar '13

20 Mar '13

1 0

Routing
by Prabhpal S. Mavi 20 Mar '13

20 Mar '13

Greetings Dear CentOS List Guys i have some specific requirement but at this point i only with to know if the following is possible. 1.) CENTOS Machine Acting as Router 2.) Machine is part of 10 VlANs Using 10 local interfaces Is it possible that i can identify the source traffic and forward it to the specific interface. i.e. Remote packet coming from 192.168.21.0 should be forward to 192.168.20.20 (eth1) Is that possible ? Thanks / Regards

3 2

Making a clone of an LVM-based EL5 install
by Lists 20 Mar '13

20 Mar '13

Does anybody here have any idea how to make an exact copy of a drive that has LVM partitions? I'm having trouble using dd to do this for an EL5 server. We're trying to diagnose a software problem of some kind and would like an exact, perfect copy of the software running so that we can see exactly what the problem is without disturbing our production copy. It's been admin practice to set up a single server with the ideal image as desired, and then use DD to replicate that image to multiple hosts. We've done this a large number of times. The exact procedure followed is: -) Perform typical file-level backups with rsync -) Install additional HDD (hereafter sdb) as least a big as the HDD to be duplicated. -) Boot off a CentOS install DVD with "linux rescue" -) Where /dev/sda is the original drive and /dev/sdb is the new drive, run: dd bs=8192 if=/dev/sda of=/dev/sdb; -) shutdown the server upon completion of the previous command and remove 2nd drive. Hereafter, using systems NOT running lvm, we have a bootable drive that can be installed into a 2nd machine and generally expect things to "just work" after sorting out a few driver issues. (EG: /dev/eth#s change) Following this exact procedure with partitions on LVM does NOT result in a booting system! -) When booting from the newly imaged drive, it starts the boot just fine but quits at: ---------------------------- Activating logical volumes Volume group "VolGroup00" not found Trying to resume from /dev/VolGroup00/LogVol01 Unable to access resume device (/dev/VolGroup00/LogVol01) Creating root device. Mounting root filesystem. mount: could not find filesystem '/dev/root' --SNIP-- switchroot: mount failed: no such file or directory Kernel panic - not syncing: Attempted to kill init! ---------------------------- -) Running Linux rescue, at the shell: ---------------------------- # pvscan PV /dev/sda2 VG VolGroup00 lvm2 [153.28 GiB / 0 free] Total: 1 [153.28 GiB] / inuse: 1 [153.28 GiB] / in no VG: [0 ] # vgscan Reading all physical volums. This may take a while... Found volume group "VolGroup00" using metadata type lvm2 # lvscan inactive '/dev/VolGroup00/LogVol00' [151.31 GiB] inherit inactive '/dev/VolGroup00/LogVol01' [1.97 GiB] inherit ---------------------------- -) Running the EL5 installer with the "Find distro" option on mounts the install at /tmp/sysimage without issue. What am I missing?!?!

5 5

New locales on C6...
by John Doe 20 Mar '13

20 Mar '13

Hi, I am trying to add esperanto and a modified greek locales... but I am not sure I am doing it right... On C5, a long time ago, I would: - grab eo_XX and el_GR from the net and put them in /usr/share/i18n/locales - localedef -c -i eo_XX -f UTF-8 /usr/share/locale/eo_XX.utf8 - localedef -c -i el_GR -f UTF-8 /usr/share/locale/el_GR.utf8 The thing is in my archives, I would have locales in both: /usr/lib/locale/ /usr/share/locale/ I do not remember if I just copied the share one in the llib one... Now, on C6, I see only /usr/share/locale/ populated... Does anybody have any experience with modifying/adding locales...? Thx, JD

1 1

unexpected 'reinitialize disk?' prompt form anaconda during kickstart with zerombr
by Duncan Hutty 19 Mar '13

19 Mar '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Anyone have any thoughts on why anaconda might be prompting me to reinitialize the disk during the kickstart of a Centos6.4 install on hyperV when a) the kickstart file contains "zerombr" as referred to in the installation guide[1] b) installation proceeds with no prompt on KVM hypervisors and succeeds? I have read the release notes[2]/tech notes[3] for 6.4 and noted lots of changes concerned with virtualization in general and hyperv hosts in particular, but I don't see anything that appears to be directly pertinent. I did try using the "clearpart --initlabel --all" approach (although that appears to be removed from 6.4), but I get the prompt with that as well. [1]: https://access.redhat.com/knowledge/docs/en-US/Red_Hat_Enterprise_Linux/6/h… [2]: https://access.redhat.com/knowledge/docs/en-US/Red_Hat_Enterprise_Linux/6/h… [3]: https://access.redhat.com/knowledge/docs/en-US/Red_Hat_Enterprise_Linux/6/h… - -- Duncan Hutty http://www.allgoodbits.org -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.17 (Darwin) Comment: GPGTools - http://gpgtools.org Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlFIkeoACgkQCFuTFybf1woVDQCbBUd7PRSa8pWNVo5aQ9V/x+lS mo4AniIpKoK0HvoDxHl2i8IZVmMJLADJ =HnVj -----END PGP SIGNATURE-----

2 1

Policy kit issue on new install of 6.4
by Emmett Culley 19 Mar '13

19 Mar '13

Twice I've done a fresh install of a "Development" machine. In both cases pkexec as a normal user always returns "Error executing command as another user: No authentication agent was found." This keeps me from getting a root command line and prevents yumex from starting from the launcher. I've googled and found nothing accept some references to installing virtual box. Checking the man pages for polkit was no help either. Since this only happens when I install the "Development" group I must assume that some package is missing, and I am at a loss as to where to look. Any clues? Emmett

2 4

kickstart bonding
by Artifex Maximus 19 Mar '13

19 Mar '13

Hello! I would like to use the new bonding feature of kickstart in release 6.4. My setup is one bonding interface (bond0) with two (eth0, eth1) ethernet cards. I am using two VLANs on bonding interface so I have no IP for bond0 but have IPs for bond0.1 and bond0.2. If I create config by hand it works. Now I would like to convert my kickstart file using the new bonding feature. The kickstart file has: network --onboot=yes --noipv6 --device=eth0 --bootproto=static network --onboot=yes --noipv6 --device=eth1 --bootproto=static network --onboot=yes --noipv6 --device=bond0 --bootproto=static --bondslaves=eth0,eth1 --bondopts=... Kickstart gives an error to the bond0 line saying "The provided network interface bond0 does not exist". Why? Then I put a 'modprobe bonding' line to my %pre section. Now same error in the following line: network --onboot=yes --noipv6 --device=bond0 --vlanid=1 --bootproto=static --ip=192.168.1.1 --netmask=255.255.255.0 It is clear as I do not have bond0.1 but why should I have at setup time. I do not want to use at setup time only in my final installation. I am lost that point so I turned to the list. I do not really understand why kickstart use interface bond0 and others at the setup time. Is it just parameters for making config file to my installation. Any idea what is the problem or a good tutorial on this new feature? Thanks, a

1 0

Re: [CentOS] Making a clone of an LVM-based EL5 install
by Antonio da Silva Martins Junior 19 Mar '13

19 Mar '13

----- "Lists" <lists(a)benjamindsmith.com> escreveu: > De: "Lists" <lists(a)benjamindsmith.com> > Para: "CentOS mailing list" <centos(a)centos.org> > Enviadas: Segunda-feira, 18 de Março de 2013 19:36:41 (GMT-0300) Auto-Detected > Assunto: [CentOS] Making a clone of an LVM-based EL5 install > > Does anybody here have any idea how to make an exact copy of a drive > that has LVM partitions? I'm having trouble using dd to do this for an > Hi, What about Clonezilla (www.clonezilla.org) or Mondo (www.mondorescue.org) ?? But, I do it with dd too, and it works fine with LVM. Att., Antonio. -- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Antonio S. Martins Jr. - Support Analyst | "Only The Shadow Knows | | Universidade Estadual de Maringá - Brasil| what evil lurks in the | | NPD - Núcleo de Processamento de Dados | Heart of Men!" | | E-Mail: asmartins(a)uem.br / shadow(a)uem.br | !!! Linux User: 52392 !!! | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ "Real Programmers don’t need comments — the code is obvious." -- Esta mensagem foi verificada pelo sistema de antivirus e acredita-se estar livre de perigo.

1 0

CentOS-announce Digest, Vol 97, Issue 10
by centos-announce-request＠centos.org 19 Mar '13

19 Mar '13

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2013:0651 CentOS 6 ghostscript Update (Johnny Hughes) 2. CEEA-2013:0655 CentOS 6 pcs Update (Johnny Hughes) 3. CEBA-2013:0654 CentOS 6 spice-vdagent Update (Johnny Hughes) 4. CEBA-2013:0653 CentOS 6 initscripts Update (Johnny Hughes) 5. CESA-2013:0656 Moderate CentOS 6 krb5 Update (Johnny Hughes) 6. CEBA-2013:0659 CentOS 6 autofs Update (Johnny Hughes) 7. CEBA-2013:0660 CentOS 5 ypserv Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 18 Mar 2013 15:44:26 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0651 CentOS 6 ghostscript Update To: centos-announce(a)centos.org Message-ID: <20130318154426.GA9622(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0651 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0651.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 3d76404119d85b0879012f8e412c34dfbc1d4712b1541ee06411d5ba8a57dbeb ghostscript-8.70-15.el6_4.1.i686.rpm c726f8673493c73b8aa812059c10922aaad0dfc1fd3ebe0e958519bef38b32b3 ghostscript-devel-8.70-15.el6_4.1.i686.rpm 440e1ca8dc8c5b7520c6cf7bab9913dfbd1466a5130f97ad3822fa0c73551d91 ghostscript-doc-8.70-15.el6_4.1.i686.rpm 9b4027f8f697e0b0a888549278a646ce0dc8b3c53242936b117403639614babc ghostscript-gtk-8.70-15.el6_4.1.i686.rpm x86_64: 3d76404119d85b0879012f8e412c34dfbc1d4712b1541ee06411d5ba8a57dbeb ghostscript-8.70-15.el6_4.1.i686.rpm a17aa797a21eb7a5a18b9a3a0dde9ab8e7f6333865d2daddc91e61ab869f2033 ghostscript-8.70-15.el6_4.1.x86_64.rpm c726f8673493c73b8aa812059c10922aaad0dfc1fd3ebe0e958519bef38b32b3 ghostscript-devel-8.70-15.el6_4.1.i686.rpm 4ac53afb615c7320b7cebd66e590f98b3be7d4759f8fb53884b2e3141e0e1722 ghostscript-devel-8.70-15.el6_4.1.x86_64.rpm eede1f3cb491278bc007a39eba5f91e081d1180c74a7b72b4a9add607baf1f1f ghostscript-doc-8.70-15.el6_4.1.x86_64.rpm 4f2bfc177c4ee3322735d643086a3625c948c60f292da24dcdd17b04eeb6fd5f ghostscript-gtk-8.70-15.el6_4.1.x86_64.rpm Source: d7b78888538f7069a79a722d62ad0d1ba77ff93ad5a601d694113de1230ad344 ghostscript-8.70-15.el6_4.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 18 Mar 2013 15:44:41 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2013:0655 CentOS 6 pcs Update To: centos-announce(a)centos.org Message-ID: <20130318154441.GA9703(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2013:0655 Upstream details at : https://rhn.redhat.com/errata/RHEA-2013-0655.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 21aad532e94cf76a4ea8ecd919d5b345c89a2371d45dd4991462c4d98a729635 pcs-0.9.26-10.el6_4.1.noarch.rpm x86_64: 21aad532e94cf76a4ea8ecd919d5b345c89a2371d45dd4991462c4d98a729635 pcs-0.9.26-10.el6_4.1.noarch.rpm Source: 3710243fa210fa0902c4d2d7d25c429ce7bae3f0df8626e510a7b5547529f0cf pcs-0.9.26-10.el6_4.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Mon, 18 Mar 2013 15:45:29 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0654 CentOS 6 spice-vdagent Update To: centos-announce(a)centos.org Message-ID: <20130318154529.GA9782(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0654 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0654.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: af9f278f843c6e0722c96016d07954b073d8a2ea2a6d064fecbd33327126d3dc spice-vdagent-0.12.0-4.el6_4.1.i686.rpm x86_64: ded05774d067fd64d5a8abe50414596272e4a7ff7b41ed584b925735329d7c1e spice-vdagent-0.12.0-4.el6_4.1.x86_64.rpm Source: af2ded8623f21daa0f93f3fbd30e4eda7d56614671e3f4585466c38714975641 spice-vdagent-0.12.0-4.el6_4.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Mon, 18 Mar 2013 15:45:42 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0653 CentOS 6 initscripts Update To: centos-announce(a)centos.org Message-ID: <20130318154542.GA9881(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0653 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0653.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: f2e1048936790323929cce86333cf363c772c25c13e2e40fddbc6852ff7b684b debugmode-9.03.38-1.el6.centos.1.i686.rpm e7e59d3a021cb0ef2e86adc32f5d29cc67870b22ceab53d02a106b70a6738549 initscripts-9.03.38-1.el6.centos.1.i686.rpm x86_64: 5645ddac8065cba3288c68d6509badb398d9806e215e18d3075e417bfbfd63e3 debugmode-9.03.38-1.el6.centos.1.x86_64.rpm 9f83730e39868c9e76c67b2bbb4f51527831c91765e4b575304716c66fbb1a32 initscripts-9.03.38-1.el6.centos.1.x86_64.rpm Source: 74dc6ca42045927fb1b8bfa1b4ad35c5449a095a1c7e52637826614a91655857 initscripts-9.03.38-1.el6.centos.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Mon, 18 Mar 2013 20:32:47 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2013:0656 Moderate CentOS 6 krb5 Update To: centos-announce(a)centos.org Message-ID: <20130318203247.GA24702(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2013:0656 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2013-0656.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: dd252f69ff25787ab75f3efaa46f76d1e0f48a87fb5b791996f4b7ef4dd7d67b krb5-devel-1.10.3-10.el6_4.1.i686.rpm 65d245d46d2f14162ed67ed25b7dca55188f8e6c43c64622e11382c544065358 krb5-libs-1.10.3-10.el6_4.1.i686.rpm 3729f6ee75a5b47977c6ca11065683219f269df8dc5f27819f849ed1c4db193a krb5-pkinit-openssl-1.10.3-10.el6_4.1.i686.rpm 2e88003b160d7b78e2de12fba9b0246a366138929409ee39e6114abfe45a0c23 krb5-server-1.10.3-10.el6_4.1.i686.rpm 9ab5a56594fc9c55be2710e81da1c57190ff53d4020b6d3c40591285c154c376 krb5-server-ldap-1.10.3-10.el6_4.1.i686.rpm 6960f13683836299c3b219d4b207dc854047e3fa3158f558c8ce68621b190513 krb5-workstation-1.10.3-10.el6_4.1.i686.rpm x86_64: dd252f69ff25787ab75f3efaa46f76d1e0f48a87fb5b791996f4b7ef4dd7d67b krb5-devel-1.10.3-10.el6_4.1.i686.rpm 3ddd84ac961e40a5bb616d5c93c7a96a3f4df7a21ee020ec9c8f551ae1395286 krb5-devel-1.10.3-10.el6_4.1.x86_64.rpm 65d245d46d2f14162ed67ed25b7dca55188f8e6c43c64622e11382c544065358 krb5-libs-1.10.3-10.el6_4.1.i686.rpm 672bc382620be509b4143c8f35530688e0495d71cee9d467f16be9e0cd6359d5 krb5-libs-1.10.3-10.el6_4.1.x86_64.rpm e43bc319aa969d23fc050b921bb16969cc0e34d2dfa7e3764476e6d3b0fe496a krb5-pkinit-openssl-1.10.3-10.el6_4.1.x86_64.rpm 43dcb6e24df2698396d995472fa28a8a5e097296b254879368bf3549f2bae5de krb5-server-1.10.3-10.el6_4.1.x86_64.rpm 9ab5a56594fc9c55be2710e81da1c57190ff53d4020b6d3c40591285c154c376 krb5-server-ldap-1.10.3-10.el6_4.1.i686.rpm 45478afc98f2dec78bec16fa1fc1e283a56d76dcbf99f8412905249ffb5ecd98 krb5-server-ldap-1.10.3-10.el6_4.1.x86_64.rpm 98d46f6adc8c7d7eb9f31ec968896a839e66fcf5b5c5c9d8ccddb250b53043e5 krb5-workstation-1.10.3-10.el6_4.1.x86_64.rpm Source: 23bc36a805d84117c9da30c87fa7d75dc18de693fa654e2207cb8223e0584ad4 krb5-1.10.3-10.el6_4.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Tue, 19 Mar 2013 10:29:10 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0659 CentOS 6 autofs Update To: centos-announce(a)centos.org Message-ID: <20130319102910.GA32104(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0659 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0659.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 48ab69fbdfd139fbc34d9f86dc25286d586155c431b1f327336dc25fad02da01 autofs-5.0.5-74.el6_4.i686.rpm x86_64: af9fb4030539b2ffd3f9da65fccef83d2f63dd7523d779b9b78377b06676102b autofs-5.0.5-74.el6_4.x86_64.rpm Source: bd6bb197140f08304d92b20dd80cb47517abda432f57c7f6db84de26ae37359d autofs-5.0.5-74.el6_4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 7 Date: Tue, 19 Mar 2013 11:00:30 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2013:0660 CentOS 5 ypserv Update To: centos-announce(a)centos.org Message-ID: <20130319110030.GA2742(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2013:0660 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0660.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 57d27c2c7db432b08cbd5474363aceb154bf4ce3e5926e5a02a5fb830e98ed11 ypserv-2.19-10.el5_9.1.i386.rpm x86_64: 1e6a3f0442ecd22205d0bcfa6ddbf08fd7e00092dc96f3e7e48e71023c326030 ypserv-2.19-10.el5_9.1.x86_64.rpm Source: ec8dba5505d1ea8f001de340006632a6e292e92a93a2ac368e248e4789e1cf22 ypserv-2.19-10.el5_9.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 97, Issue 10 ***********************************************

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss