Discuss

discuss@lists.centos.org

34758 discussions

6.4 SRPMS
by me＠tdiehl.org 11 Mar '13

11 Mar '13

Hi, Can someone tell me when the 6.4 srpms are going to appear in vault? I am looking for the centos-release srpm. Regards, -- Tom me(a)tdiehl.org Spamtrap address me123(a)tdiehl.org

3 3

question after updating to 6.4
by Jerry Geis 11 Mar '13

11 Mar '13

My video driver for AMD HD 4200 did not work after upgrading. I tried to fix it with 13.1 legacy drivers but that did not work I then just grapped a AMD HD 5200 video card and put on AMD 13.1 "regular" and that worked. however, After updating x86_64 to 6.4 and when I compile my project I get this message make: *** No rule to make target `/usr/lib/gcc/x86_64-redhat-linux/4.4.6/include/stddef.h', I have done a "make clean" and the message persists. there is no directory /usr/lib/gcc/x86_64-redhat-linux/4.4.6 - there is a 4.4.7 which matches the "gcc --version" Where is this message coming from and how can I remove it. Thanks, Jerry

1 0

Older versions of packages disappearing from yum repos
by Brian Lalor 11 Mar '13

11 Mar '13

I've been designing the infrastructure for a new team using CentOS 6 and Puppet. I'm still learning Puppet, but thought I had things pretty well under control. After this week, I'm beginning to wonder… :-) In the last week I've had versions of three packages disappear from the yum repositories I'm using, both EPEL and the standard ones from a base CentOS 6.3 install. Since I'm trying to install specific versions of packages with Puppet, this is a problem. The most recent one that just turned up this morning is kernel-devel. I have the following resource defined in one of my Puppet manifests: package {"kernel-devel-${::kernelrelease}": alias => 'kernel-devel', } I'm trying to ensure that I've got the kernel-devel package installed that matches the kernel I'm currently using. I naively assumed that once a package was made available via the official CentOS mirrors that it would never disappear. That doesn't appear to be the case. I have kernel-2.6.32-279.19.1.el6.x86_64 installed. kernel-devel-2.6.32-279.19.1.el6.x86_64 is gone, apparently replaced with kernel-devel-2.6.32-358.0.1.el6.x86_64. I have a couple of other packages that have given me problems, too, namely ngircd which was upgraded from 18 to 20.1. How do I manage this problem? Do I need to maintain my own mirrors? That seems like a horrible solution. Is there another CentOS repository I should be using? Am I just going about this all wrong? Thanks, Brian -- Brian Lalor blalor(a)bravo5.org

2 2

About VLC 1.1.11 and 1.1.13 on CentOS 6.3 64 bit
by Mayur Patil 11 Mar '13

11 Mar '13

Hello, I have installed, after a long hiccups, VLC on centOS. VLC is showing installed through package repo. I tried first VLC 1.1.13 but it says dependency issues. So I uninstall it and install 1.1.11 again from repo. This time installation gets completed and installation appears in package repo and VLC icon on the Accessories; but The problem is when I click on it displays nothing. And also one error occured it was asking for AMD video drivers but my PC is Intel based. Confused !! Seeking for guidance, Thank you !! -- *Cheers, Mayur*.

2 1

exim localhost vs 127.0.0.1
by Mihamina Rakotomandimby 11 Mar '13

11 Mar '13

Hi all, I had a big problem I did not figured out. It is solved, but I have questions about the matter. It's about Exim 4.72/CentOS 6. Connecting to Exim via "localhost" is denies relay Connecting to Exim via 127.0.0.1 accepts the relay "localhost" is in the local_domains domainlists "localhost" is resolving to 127.0.0.1 in /etc/hosts Why? [mihamina@recette53 ~]$ rpm -aq | grep exim exim-4.72-4.el6.x86_64 [mihamina@recette53 ~]$ telnet localhost 25 Trying ::1... Connected to localhost. Escape character is '^]'. 220 recette53.ideoneov.com ESMTP Exim 4.72 Mon, 11 Mar 2013 10:09:27 +0100 HELO mihamina 250 recette53.ideoneov.com Hello localhost [::1] MAIL from: <mrakotom(a)free.fr> 250 OK RCPT to: <mihamina(a)rktmb.org> 550 relay not permitted mihamina@recette53 ~]$ telnet 127.0.0.1 25 Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. 220 recette53.ideoneov.com ESMTP Exim 4.72 Mon, 11 Mar 2013 10:10:26 +0100 HELO mihamina 250 recette53.ideoneov.com Hello localhost [127.0.0.1] MAIL from: <mrakotom(a)free.fr> 250 OK RCPT to: <mihamina(a)rktmb.org> 250 Accepted DATA 354 Enter message, ending with "." on a line by itself From: <mrakotom(a)free.fr> To: <mihamina(a)rktmb.org> Subject: Haftra Andrana Ity dia andrana fotsiny ihany. . 250 OK id=1UEykk-0006Fr-TO QUIT 221 recette53.ideoneov.com closing connection -- RMA. -- RMA.

2 1

CentOS 6.4 Release Date.
by Kaushal Shriyan 11 Mar '13

11 Mar '13

Hi, Any date planned to release CentOS 6.4 as GA release? Regards, Kaushal

16 25

/etc/sysconfig/network-scripts/ifcfg-xxx for CHAP PPPoE
by Mihamina Rakotomandimby 11 Mar '13

11 Mar '13

Hi all I get a Cisco 1841 router, connecting the office through a CHAP PPPoE link: [...] interface Dialer1 ip address negotiated ip mtu 1492 ip nat outside ip virtual-reassembly encapsulation ppp ip tcp adjust-mss 1452 dialer pool 1 dialer-group 1 no cdp enable ppp authentication chap callin ppp chap hostname username@isp ppp chap password 0 s0meStr0ngP4sswd [...] As a fallback solution, I would like to setup a CentOS Dual NIC 1U unit. I dont want to use NetworkManager, I'd rather use the bare interface configuration tools. I'm running CentOS 6.3 I looked for the right way to configure the internface: - http://goo.gl/UaNBe: officiel doc, found no indication. - http://goo.gl/DQ5Gk: using rp-pppoe, is it the right way? - http://goo.gl/PTaes: seem to be right, but which package is it from? -- RMA.

2 1

Re: [CentOS] yum update gone wild? - new base?
by Robert Moskowitz 11 Mar '13

11 Mar '13

On 03/10/2013 09:59 PM, Reindl Harald wrote: > > Am 11.03.2013 02:30, schrieb Robert Moskowitz: >> I am being hit on a number of my systems with yum update reporting 270+ >> rpms to update, and MOST are coming from the base repo. I checked a few >> out, and yes, they are of a higher release. >> >> I don't recall ever seeing the base repo change; it is almost like it is >> picking up the the 6.4 base repo instead > maybe you should read this list not only post > and understand how CentOS works > > 6.4 is out - so why do you imagine you stay on 6.3? Just panicsville. I am trying to pack up to fly to meetings tomorrow, and saw this big update. It has been too long since I was serious with Centos, and forgot that dot releases are major changes to the life of your server. No way to bite off small bits. So I will download the full current repos to my server over the week way, then apply them after I get back. Just a case of bad timing on my part, resulting in an unnecessary panic. Sorry all.

1 0

BIND Setup Issue
by Austin Einter 11 Mar '13

11 Mar '13

Dear All I have a CentOS 6.3 machine. I am trying to setup DNS BIND setup in that machine. It is having a static global IP. I have done lot of reading , google search and tried all possible option, but still not able to resolve the issue. My named.conf looks as below. * * * // named.conf // // Provided by Red Hat bind package to configure the ISC BIND named(8) DNS // server as a caching only nameserver (as a localhost DNS resolver only). // // See /usr/share/doc/bind*/sample/ for example named configuration files. // options { listen-on port 53 { 127.0.0.1; 10.0.0.1; }; listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; query-source address * port 53; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; allow-query { localhost; 10.0.0.1/24; 10.0.0.254/24; }; recursion yes; dnssec-enable yes; dnssec-validation yes; dnssec-lookaside auto; /* Path to ISC DLV key */ bindkeys-file "/etc/named.iscdlv.key"; managed-keys-directory "/var/named/dynamic"; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; zone "." IN { type hint; file "named.ca"; };zone "netcloudjobs.com" { type master; file "netcloudjobs.com.fwd"; allow-update { none; }; }; zone "189.201.173.in-addr.arpa" { type master; file "netcloudjobs.com.rev"; allow-update { none; }; }; include "/etc/named.rfc1912.zones"; include "/etc/named.root.key"; * Next my forward zone file looks as below * $TTL 86400 @ IN SOA ns1.netcloudjobs.com. root.netcloudjobs.com. ( 2021071001 ;Serial 3600 ;Refresh 1800 ;Retry 604800 ;Expire 86400 ;Minimum TTL ) @ IN NS ns1.netcloudjobs.com. @ IN NS ns2.netcloudjobs.com. ns1 IN A 173.201.189.43 ns2 IN A 173.201.189.43 * And my reverse zone file looks as *$TTL 86400 @ IN SOA ns1.netcloudjobs.com. root.netcloudjobs.com. ( 2021071001 ;Serial 3600 ;Refresh 1800 ;Retry 604800 ;Expire 86400 ;Minimum TTL ) @ IN NS ns1.netcloudjobs.com. @ IN NS ns2.netcloudjobs.com. ns1 IN A 173.201.189.43 ns2 IN A 173.201.189.43 43 IN PTR ns1.netcloudjobs.com. 44 IN PTR ns2.netcloudjobs.com. * I hope I am doing something wrong with configuration. I have done this since more than 60 hours. Still I am not able to resolve ns1.netcloudjobs.com. Can somebody help here. Best Regards Austin

6 11

yum update gone wild? - new base?
by Robert Moskowitz 11 Mar '13

11 Mar '13

I am being hit on a number of my systems with yum update reporting 270+ rpms to update, and MOST are coming from the base repo. I checked a few out, and yes, they are of a higher release. I don't recall ever seeing the base repo change; it is almost like it is picking up the the 6.4 base repo instead. Anyone else seeing this. I JUST did an install from my local repo copy of the 6.3 base and update using a netinstall kickstart, then yum tells me that there are 270+ updates...

2 1

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss