- Discuss - lists.centos.org

upgrade issue
by Paul A 13 Apr '12

13 Apr '12

I have an old dell 2450 that was running kernel 2.6.18-308.1.1.el5 I then upgraded it via yum to 2.6.18-308.1.1.el5. Now when the server boots to the new kernel, 2.6.18-308.1.1.el5 it hangs on "starting iSCSI" and the weird thing is when I tried to switch back to the older 2.6.18-308.1.1.el5 kernel it works fine but the network script fails to start. I'm not really sure what I should do, if someone can give me an idea on what I need to do to fix the iSCSId issue on the new kernel or revert back to the old kernel and fix the network issue. The odd thing is both kernel load the e100 network driver but on the older kernel I can get the network script to start. I would appreciate some help. paul

3 7

Intel Graphics on Dell Optiplex (Generic Question)
by Brian McGrew 13 Apr '12

13 Apr '12

Good morning, Dell has once again obsoleted out hardware and we're moving forward to the Optiplex 790 as a shipping platform with the integrated Intel graphics chip. We're using CentOS 5.6 32 and 64-bit with a 2.6.18 kernel. What are my options for supporting the newest Intel graphics chipsets? -b

4 3

Re: [CentOS] FOUND_THE_ISSUE -- URGENT -- pseudo network interface creating problem with dhcp-- centos 5.5
by sri 13 Apr '12

13 Apr '12

Hi John, Thanks for the explanation. I looked at the BIOS and found the following where the pseudo MAC address is from: ################################################################################ Planar Ether 1 MAC Address: E4:1F:13:77:16:5F ============> This is shown in ifconfig eth0 Planar Ether 2 MAC Address: E4:1F:13:77:16:60 ============> This is shown in ifconfig eth1 BMC MAC Address: E4:1F:13:77:16:61 ======> This is the MAC address my SW is showing on the SW port connected to my eth0 Slot 1 MAC Address: 00:15:17:EB:AE:A4 ===========> This is shown in ifconfig eth2 ######################################################## I got some pointers over web on how to disable the BMC so that it would not use eth0. But another question in my mind is what is the significance of BMC MAC address here? (How different is it from the MAC addresses of other conneted NIC cards and how OS uses it)? And why not BIOS shows all the NIC devices detected ? (because "ifconfig -a" shows eth0/eth1/eth2/eth3 for me with eth3 MAC is: 00:15:17:EB:AE:A5. I could not see eth3 MAC address in the above BIOS output). Thanks for your time. Regards, Sri On Thu, Apr 12, 2012 at 1:18 AM, John R Pierce <pierce(a)hogranch.com> wrote: > On 04/11/12 9:36 AM, sri wrote: >> 4) Have you checked if your motherboard IPMI is not pulling an address >> during boot? >> -- Frankly, not sure how to check motherboard IPMI messages. Verified >> dmesg output. Following is the dmesg output. >> Please share any way to check motherboard IPMI is pulling another address? > > well, first, does your motherboard *HAVE* an IPMI management module, and > if so, does it use a dedicated ethernet port, or is it 'piggybacked' on > eth0 ? the behavior shown could be the latter. > > I'd look in the system or motherboard documentation for this... > depending on the IPMI module, it may have a web or ssh interface, or it > may require another system contact it via an 'ipmitool' of some sort. > It probably has an initial user/pass like admin/admin which should be > reconfigured during system configuration and deployment. > > -- > john r pierce N 37, W 122 > santa cruz ca mid-left coast > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos -- -- Krishna Mohan B

3 2

Bacula - missing mysql file?
by TE Dukes 13 Apr '12

13 Apr '12

Hello, Tying to setup bacula but it seems the package(s) are missing the mysql file to set up the database. I see some updatedb files to upgrade a mysql database but none for a new installation. TIA

2 3

CentOS 6.2 anaconda bug?
by Lars Hecking 13 Apr '12

13 Apr '12

I have a kickstart file with the following partitioning directives: part /boot --fstype ext3 --onpart=sda1 part pv.100000 --onpart=sda2 --noformat volgroup vol0 pv.100000 --noformat logvol / --vgname=vol0 --name=lvol1 --useexisting --fstype=ext4 logvol /tmp --vgname=vol0 --name=lvol2 --useexisting --fstype=ext4 logvol swap --vgname=vol0 --name=lvol3 --useexisting logvol /data --vgname=vol0 --name=lvol4 --noformat The purpose is reinstalling a machine with a given partitioning scheme and preserve files on /data across the reinstall. Kickstarting a machine with these instructions, it comes up without the /data partition, it is not mounted and not in fstab. But the lvol exists and can be mounted manually, with all data preserved. /root/anaconda-ks.cfg shows the following: #part /boot --fstype=ext3 --onpart=sda1 #part pv.008002 --onpart=sda2 --noformat #volgroup vol0 --pesize=32768 --useexisting --noformat pv.008002 #logvol / --fstype=ext4 --name=lvol1 --vgname=vol0 --useexisting #logvol /tmp --fstype=ext4 --name=lvol2 --vgname=vol0 --useexisting #logvol swap --name=lvol3 --vgname=vol0 --useexisting #logvol --name=lvol4 --vgname=vol0 --useexisting --noformat I.e. the mount point was dropped. Any ideas why this might be happening? I couldn't find anything related in the migration guide, and this looks like a bug to me.

1 1

compiling openssh5.8src.rpm looking for Xlib.h
by Vinay Nagrik 13 Apr '12

13 Apr '12

Hello Group, I created a VM with 5.7 Centos DVD-1. My task is to compile openssh5.8p2 (src.rpm downloaded from openssh site.) on the system. It gave some errors about some buildrequires rpm not found. I took care of them. Now it is complaining about > [root@akjain-centos5 SPECS]# rpmbuild -bb openssh.spec > error: Failed build dependencies: > /usr/include/X11/Xlib.h is needed by openssh-5.8p2-1.x86_64 > I have copied Xlib.h from another machine (running el5) into /usr/include/X11 directory. But it still does not recognize this particular file "Xlib.h" and continues to give same error. Do I need a particulare Xlib.h for this machine, 'if yes', then can someone tell me where from to get this file. I will appreciate this. Thanks in advance. nagrik

4 3

Interpretation of a hardware error
by m.roth＠5-cent.us 13 Apr '12

13 Apr '12

Hey, folks, I've just started seeing Apr 12 13:09:59 <server> kernel: [Hardware Error]: MC4_STATUS[Over|CE|MiscV|-|AddrV|-|Poison|CECC]: 0xdd0accf2001d011b Apr 12 13:09:59 <server> kernel: [Hardware Error]: Northbridge Error (node 1, core 1): ECC error in L3 cache tag. Apr 12 13:09:59 <server> kernel: [Hardware Error]: cache level: L3/GEN, tx: GEN, mem-tx: RD Apr 12 13:09:59 <server> kernel: [Hardware Error]: Machine check events logged I'm guessing, unhappily, that this means the on-chip cache, not DIMM. Does anyone here know? mark, who'll be the one to call it in under warranty....

2 1

help from community
by Prabhpal S. Mavi 13 Apr '12

13 Apr '12

Dear All Greetings, i am admin for ISP two years now, relay emails for more than 300 companies (CentOS/Postfix). Relaying more than 10,000 messages every hours successfully. no one has ever compliant for non delivery. but i cannot relay to this domain. The servers responsible for accepting messages are rejecting. i have given the whole log for experts to monitor. it is something out of control, because it is not my problem. Our server has all record created (A,MX,PTR,SPF etc). i have three relay hosts fully functional. destination server is not accepting from any relay host. can anyone try from his server and see if it is deliverable to ray(a)tata-nigeria.com Thanks / Regards Prabhpal S. Mavi Apr 12 11:06:00 titan postfix/qmgr[11860]: C3C142E4012: from=<****(a)digital-infotech.net>, size=1391, nrcpt=1 (queue active) Apr 12 11:06:02 titan postfix/smtp[12039]: C3C142E4012: host mx2.servershost.net[205.234.223.160] said: 450 4.1.7 <****(a)digital-infotech.net>: Sender address rejected: unverified address: host mail.digital-infotech.net[41.211.25.193] said: 450 4.7.1 Client host rejected: cannot find your hostname, [205.234.223.198] (in reply to RCPT TO command) (in reply to RCPT TO command) Apr 12 11:06:03 titan postfix/smtp[12039]: C3C142E4012: to=<ray(a)tata-nigeria.com>, relay=mx3.servershost.net[66.225.214.101]:25, delay=1381, delays=1377/0.03/3.4/0.31, dsn=4.1.7, status=deferred (host mx3.servershost.net[66.225.214.101] said: 450 4.1.7 <****(a)digital-infotech.net>: Sender address rejected: unverified address: host mail.digital-infotech.net[41.211.25.193] said: 450 4.7.1 Client host rejected: cannot find your hostname, [205.234.223.198] (in reply to RCPT TO command) (in reply to RCPT TO command)) Thanks / Regards Prabhpal S. Mavi

6 13

Installing CentOS 6.2 *TO* a USB drive, not installing from USB.
by Emmanuel Noobadmin 13 Apr '12

13 Apr '12

I'm trying to setup a very small system intended for doing monitoring/logging. It's done on an Intel Atoms in a small box and the idea was to simply run it off a pair of USB flash drives in software RAID 1. Now the problem is that while the 6.2 DVD installer could go through the entire install process, grub will load then just stop at the prompt. The system will work if I use a SATA hard disk so motherboard compatibility is not an issue. Attempting the various methods to re-install grub (via rescue mode) or using the grub prompt to setup the disk does not work either. grub just does not seem to be able to find the USB drives. e.g. commands like root (hd0,0) just says device not found. This is despite grub having just loaded from it and despite that grub-install in rescue mode does not report any error. Same problem even if I just go with one USB drive in a plain vanilla ext3 setup. It seems that some sites are saying that EL variants just don't seem to be adaptable to installing and running off USB drives. Is this really the case and that I should be looking at using another distribution or am I just missing some crucial steps in the process?

6 16

Nvidia security vulnerability (CVE-2012-0946)
by Phil Schaffner 12 Apr '12

12 Apr '12

Not strictly a CentOS issue, but users of the Nvidia drivers should be aware of this. See their announcement[1] for details. Users of the the manufacturer's driver, or the ELRepo kmod-nvidia driver[2] should update ASAP to the new version. Phil [1] http://www.nvnews.net/vbulletin/showthread.php?t=178006 [2] http://elrepoproject.blogspot.com/2012/04/nvidia-driver-that-fixes-security…

1 0

CentOS 6.2 x86_64 Squirrelmail Problem
by Prabhpal S. Mavi 12 Apr '12

12 Apr '12

Greetings Friends, is any one knows why i see squirrelmail login interface like below Live Example Can Be Seen Here: https://mail.digital-infotech.com/webmail i have tried to install configure from source as well rather than RPM but all the same.security permissions have been verified also. and i have no clue any more. help would be greatly appreciated Thanks / Regards <> < bgcolor="#ffffff" border="0" cellspacing="0" cellpadding="0" width="100%"><><> SquirrelMail version 1.4.22-2.el6 By the SquirrelMail Project Team < bgcolor="#ffffff" border="0" width="350"><>< bgcolor="#dcdcdc">Digital Infotech Limited Login <>< bgcolor="#ffffff"> < bgcolor="#ffffff" border="0" width="100%"><>< width="30%">Name: < width="70%"> <>< width="30%">Password: < width="70%"> <><> Thanks / Regards Prabhpal S. Mavi Email: prabhpal(a)digital-infotech.net Sent Through .Net Domain From iPhone

3 4

Problem with latest kernel install
by Arthur Pemberton 12 Apr '12

12 Apr '12

After a simple `yum update` I got the following on reboot. Could not load /lib/modules/2.6.32-220.7.1.el6.x86_64/modules.dep: No such file or director FATAL: Could not load /lib/module.el6.x86_64/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.32-220.7.1.el6.x86_64/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.32-220.7.1.el6.x86_64/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.32-220.7.1.el6.x86_64/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.32-220.7.1.el6.x86_64/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.32-220.7.1.el6.x86_64/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.32-220.7.1.el6.x86_64/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.32-220.7.1.el6.x86_64/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.32-220.7.1.el6.x86_64/modules.dep: No such file or directory What's the best way to resolve this?

2 2

FSCK on mounted filesystem (LVM/DRBD)?
by Rafał Radecki 12 Apr '12

12 Apr '12

Hi All. I have two running servers (drbd primary, drbd secondary). When there is a problem with one of them we switch to the second one. Currently on the /dev/drbd0 (it has /xxx ext3 filesystem directly on it) we have some filesystem problems (after fsck -n). I would like to correct these errors but the filesystem should be unmounted first (I would like to avoid it if possible). Is there a way to make fsck -a on mounted filesystem for ext3? My setup is: ext3 filesystem (problems) ^ DRBD ^ LVS ^ RAID Any ideas? Best regards, Rafal.

3 4

centos 6.2 md0 boot - no boot actually
by aurfalien 12 Apr '12

12 Apr '12

Hi all, Taken from this link; https://www.centos.org/modules/newbb/print.php?form=1&topic_id=34988&forum=… Seems like I am having the same issue. I assigned my boot loader to be on /dev/md0 rather then the default of /dev/sda1 Does any one have insight to this? Thanks in advance. BTW, I have no swap partition and will do a swap file instead, easier to manage. Do I need swap to boot? - aurf

4 5

Hyper Threading Feature
by Kaushal Shriyan 12 Apr '12

12 Apr '12

Hi, Any performance bottleneck if HT (Hyper Threading) is enabled in quad core processors on CentOS 5.8 running MySQL DB Server ? Please help me understand about pros and cons of this feature. Regards, Kaushal

3 2

screen brightness changes depending on which application is run
by Jeff Cen 12 Apr '12

12 Apr '12

Hi, I found my LCD screen brightness increase when I use firefox and other white background editors and screen brightness decrease when I use dark background applications, such as terminals with black background . The change in screen brightness depending on the applications has been annoying. My centos version is ver 5.7 64 bit. Has anyone seen a similar problem or have a solution for that? Thanks in advance. Jeff

4 5

6.2 x86_64 "mtrr_cleanup: can not find optimal value"
by Michael McNulty 12 Apr '12

12 Apr '12

Hi, I have server that has been running 5.x - 5.8 for a few years without issue and decided to move it to a fresh install of 6.2. First thing I noticed is a good part of the log has these mtrr messages finally ending with "mtrr_cleanup: can not find optimal value" and "please specify mtrr_gran_size/mtrr_chunk_size". I have been searching around and reading the kernel docs but are bit lost on the impact. The system CPU is a q6600 so it supports mtrr. It has 8gb of RAM and a G33 intel chipset (maximum memory is 8gb), 256mb onboard Intel video. Problem exists with DVD 6.2 kernel and latest in yum update 2.6.32-220.7.1.el6.x86_64. If I disable the Bios "memory remap feature", mtrr appears to have found it settings. But it says total ram covered is 7415M, so I lose some memory since when enabled it shows 8183M but mtrr fails. A little concerned about putting this back into production with this but hope to get it resolved rather than reinstall 5.8. Will mtrr failing result in stability or performance loss? Is there any performance loss disabling memory remap in bios other than losing 600k? thx Is this happening because the chipset only supports 8gb of memory and therefore mtrr cannot remap memory above 8gb? (assuming not since problem did not exist in 5.x centos) -- Mike Bios Memory remap feature: enabled Apr 11 17:25:36 kernel: total RAM covered: 8183M Apr 11 17:25:36 kernel: gran_size: 64K chunk_size: 64K num_reg: 8 lose cover RAM: 4865M Apr 11 17:25:36 kernel: gran_size: 64K chunk_size: 128K num_reg: 8 lose cover RAM: 4865M Apr 11 17:25:36 kernel: gran_size: 64K chunk_size: 256K num_reg: 8 lose cover RAM: 4865M Apr 11 17:25:36 kernel: gran_size: 64K chunk_size: 512K num_reg: 8 lose cover RAM: 4865M Apr 11 17:25:36 kernel: gran_size: 64K chunk_size: 1M num_reg: 8 lose cover RAM: 4865M Apr 11 17:25:36 kernel: gran_size: 64K chunk_size: 2M num_reg: 8 lose cover RAM: 4864M Apr 11 17:25:36 kernel: gran_size: 64K chunk_size: 4M num_reg: 8 lose cover RAM: 4864M Apr 11 17:25:36 kernel: gran_size: 64K chunk_size: 8M num_reg: 8 lose cover RAM: 4864M Apr 11 17:25:36 kernel: gran_size: 64K chunk_size: 16M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: gran_size: 64K chunk_size: 64M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: gran_size: 64K chunk_size: 128M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: gran_size: 64K chunk_size: 256M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: *BAD*gran_size: 64K chunk_size: 512M num_reg: 8 lose cover RAM: -256M Apr 11 17:25:36 kernel: gran_size: 64K chunk_size: 1G num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: *BAD*gran_size: 64K chunk_size: 2G num_reg: 8 lose cover RAM: -1G Apr 11 17:25:36 kernel: gran_size: 128K chunk_size: 128K num_reg: 8 lose cover RAM: 4865M Apr 11 17:25:36 kernel: gran_size: 128K chunk_size: 256K num_reg: 8 lose cover RAM: 4865M Apr 11 17:25:36 kernel: gran_size: 128K chunk_size: 512K num_reg: 8 lose cover RAM: 4865M Apr 11 17:25:36 kernel: gran_size: 128K chunk_size: 1M num_reg: 8 lose cover RAM: 4865M Apr 11 17:25:36 kernel: gran_size: 128K chunk_size: 2M num_reg: 8 lose cover RAM: 4864M Apr 11 17:25:36 kernel: gran_size: 128K chunk_size: 4M num_reg: 8 lose cover RAM: 4864M Apr 11 17:25:36 kernel: gran_size: 128K chunk_size: 8M num_reg: 8 lose cover RAM: 4864M Apr 11 17:25:36 kernel: gran_size: 128K chunk_size: 16M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: gran_size: 128K chunk_size: 32M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: gran_size: 128K chunk_size: 64M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: gran_size: 128K chunk_size: 128M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: gran_size: 128K chunk_size: 256M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: *BAD*gran_size: 128K chunk_size: 512M num_reg: 8 lose cover RAM: -256M Apr 11 17:25:36 kernel: gran_size: 128K chunk_size: 1G num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: *BAD*gran_size: 128K chunk_size: 2G num_reg: 8 lose cover RAM: -1G Apr 11 17:25:36 kernel: gran_size: 256K chunk_size: 256K num_reg: 8 lose cover RAM: 4865M Apr 11 17:25:36 kernel: gran_size: 256K chunk_size: 512K num_reg: 8 lose cover RAM: 4865M Apr 11 17:25:36 kernel: gran_size: 256K chunk_size: 1M num_reg: 8 lose cover RAM: 4865M Apr 11 17:25:36 kernel: gran_size: 256K chunk_size: 2M num_reg: 8 lose cover RAM: 4864M Apr 11 17:25:36 kernel: gran_size: 256K chunk_size: 4M num_reg: 8 lose cover RAM: 4864M Apr 11 17:25:36 kernel: gran_size: 256K chunk_size: 8M num_reg: 8 lose cover RAM: 4864M Apr 11 17:25:36 kernel: gran_size: 256K chunk_size: 16M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: gran_size: 256K chunk_size: 32M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: gran_size: 256K chunk_size: 64M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: gran_size: 256K chunk_size: 128M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: gran_size: 256K chunk_size: 256M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: *BAD*gran_size: 256K chunk_size: 512M num_reg: 8 lose cover RAM: -256M Apr 11 17:25:36 kernel: gran_size: 256K chunk_size: 1G num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: *BAD*gran_size: 256K chunk_size: 2G num_reg: 8 lose cover RAM: -1G Apr 11 17:25:36 kernel: gran_size: 512K chunk_size: 512K num_reg: 8 lose cover RAM: 4865M Apr 11 17:25:36 kernel: gran_size: 512K chunk_size: 1M num_reg: 8 lose cover RAM: 4865M Apr 11 17:25:36 kernel: gran_size: 512K chunk_size: 2M num_reg: 8 lose cover RAM: 4864M Apr 11 17:25:36 kernel: gran_size: 512K chunk_size: 4M num_reg: 8 lose cover RAM: 4864M Apr 11 17:25:36 kernel: gran_size: 512K chunk_size: 8M num_reg: 8 lose cover RAM: 4864M Apr 11 17:25:36 kernel: gran_size: 512K chunk_size: 16M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: gran_size: 512K chunk_size: 32M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: gran_size: 512K chunk_size: 64M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: gran_size: 512K chunk_size: 128M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: gran_size: 512K chunk_size: 256M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: *BAD*gran_size: 512K chunk_size: 512M num_reg: 8 lose cover RAM: -256M Apr 11 17:25:36 kernel: gran_size: 512K chunk_size: 1G num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: *BAD*gran_size: 512K chunk_size: 2G num_reg: 8 lose cover RAM: -1G Apr 11 17:25:36 kernel: gran_size: 1M chunk_size: 1M num_reg: 8 lose cover RAM: 4865M Apr 11 17:25:36 kernel: gran_size: 1M chunk_size: 2M num_reg: 8 lose cover RAM: 4864M Apr 11 17:25:36 kernel: gran_size: 1M chunk_size: 4M num_reg: 8 lose cover RAM: 4864M Apr 11 17:25:36 kernel: gran_size: 1M chunk_size: 8M num_reg: 8 lose cover RAM: 4864M Apr 11 17:25:36 kernel: gran_size: 1M chunk_size: 16M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: gran_size: 1M chunk_size: 32M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: gran_size: 1M chunk_size: 64M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: gran_size: 1M chunk_size: 128M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: gran_size: 1M chunk_size: 256M num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: *BAD*gran_size: 1M chunk_size: 512M num_reg: 8 lose cover RAM: -256M Apr 11 17:25:36 kernel: gran_size: 1M chunk_size: 1G num_reg: 8 lose cover RAM: 0G Apr 11 17:25:36 kernel: *BAD*gran_size: 1M chunk_size: 2G num_reg: 8 lose cover RAM: -1G Apr 11 17:25:36 kernel: gran_size: 2M chunk_size: 2M num_reg: 8 lose cover RAM: 4865M Apr 11 17:25:36 kernel: gran_size: 2M chunk_size: 4M num_reg: 8 lose cover RAM: 4865M Apr 11 17:25:36 kernel: gran_size: 2M chunk_size: 8M num_reg: 8 lose cover RAM: 4865M Apr 11 17:25:36 kernel: gran_size: 2M chunk_size: 16M num_reg: 8 lose cover RAM: 1M Apr 11 17:25:36 kernel: gran_size: 2M chunk_size: 32M num_reg: 8 lose cover RAM: 1M Apr 11 17:25:36 kernel: gran_size: 2M chunk_size: 64M num_reg: 8 lose cover RAM: 1M Apr 11 17:25:36 kernel: gran_size: 2M chunk_size: 128M num_reg: 8 lose cover RAM: 1M Apr 11 17:25:36 kernel: gran_size: 2M chunk_size: 256M num_reg: 8 lose cover RAM: 1M Apr 11 17:25:36 kernel: *BAD*gran_size: 2M chunk_size: 512M num_reg: 8 lose cover RAM: -255M Apr 11 17:25:36 kernel: gran_size: 2M chunk_size: 1G num_reg: 8 lose cover RAM: 1M Apr 11 17:25:36 kernel: *BAD*gran_size: 2M chunk_size: 2G num_reg: 8 lose cover RAM: -1023M Apr 11 17:25:36 kernel: gran_size: 4M chunk_size: 4M num_reg: 8 lose cover RAM: 771M Apr 11 17:25:36 kernel: gran_size: 4M chunk_size: 8M num_reg: 8 lose cover RAM: 4867M Apr 11 17:25:36 kernel: gran_size: 4M chunk_size: 16M num_reg: 8 lose cover RAM: 3M Apr 11 17:25:36 kernel: gran_size: 4M chunk_size: 32M num_reg: 8 lose cover RAM: 3M Apr 11 17:25:36 kernel: gran_size: 4M chunk_size: 64M num_reg: 8 lose cover RAM: 3M Apr 11 17:25:36 kernel: gran_size: 4M chunk_size: 128M num_reg: 8 lose cover RAM: 3M Apr 11 17:25:36 kernel: gran_size: 4M chunk_size: 256M num_reg: 8 lose cover RAM: 3M Apr 11 17:25:36 kernel: *BAD*gran_size: 4M chunk_size: 512M num_reg: 8 lose cover RAM: -253M Apr 11 17:25:36 kernel: gran_size: 4M chunk_size: 1G num_reg: 8 lose cover RAM: 3M Apr 11 17:25:36 kernel: *BAD*gran_size: 4M chunk_size: 2G num_reg: 8 lose cover RAM: -1021M Apr 11 17:25:36 kernel: gran_size: 8M chunk_size: 8M num_reg: 8 lose cover RAM: 263M Apr 11 17:25:36 kernel: gran_size: 8M chunk_size: 16M num_reg: 8 lose cover RAM: 263M Apr 11 17:25:36 kernel: gran_size: 8M chunk_size: 32M num_reg: 7 lose cover RAM: 7M Apr 11 17:25:36 kernel: gran_size: 8M chunk_size: 64M num_reg: 7 lose cover RAM: 7M Apr 11 17:25:36 kernel: gran_size: 8M chunk_size: 128M num_reg: 7 lose cover RAM: 7M Apr 11 17:25:36 kernel: gran_size: 8M chunk_size: 256M num_reg: 7 lose cover RAM: 7M Apr 11 17:25:36 kernel: gran_size: 8M chunk_size: 512M num_reg: 8 lose cover RAM: 7M Apr 11 17:25:36 kernel: gran_size: 8M chunk_size: 1G num_reg: 7 lose cover RAM: 7M Apr 11 17:25:36 kernel: gran_size: 8M chunk_size: 2G num_reg: 8 lose cover RAM: 7M Apr 11 17:25:36 kernel: gran_size: 16M chunk_size: 16M num_reg: 8 lose cover RAM: 263M Apr 11 17:25:36 kernel: gran_size: 16M chunk_size: 32M num_reg: 7 lose cover RAM: 7M Apr 11 17:25:36 kernel: gran_size: 16M chunk_size: 64M num_reg: 7 lose cover RAM: 7M Apr 11 17:25:36 kernel: gran_size: 16M chunk_size: 128M num_reg: 7 lose cover RAM: 7M Apr 11 17:25:36 kernel: gran_size: 16M chunk_size: 256M num_reg: 7 lose cover RAM: 7M Apr 11 17:25:36 kernel: gran_size: 16M chunk_size: 512M num_reg: 8 lose cover RAM: 7M Apr 11 17:25:36 kernel: gran_size: 16M chunk_size: 1G num_reg: 7 lose cover RAM: 7M Apr 11 17:25:36 kernel: gran_size: 16M chunk_size: 2G num_reg: 8 lose cover RAM: 7M Apr 11 17:25:36 kernel: gran_size: 32M chunk_size: 32M num_reg: 8 lose cover RAM: 23M Apr 11 17:25:36 kernel: gran_size: 32M chunk_size: 64M num_reg: 7 lose cover RAM: 23M Apr 11 17:25:36 kernel: gran_size: 32M chunk_size: 128M num_reg: 7 lose cover RAM: 23M Apr 11 17:25:36 kernel: gran_size: 32M chunk_size: 256M num_reg: 7 lose cover RAM: 23M Apr 11 17:25:36 kernel: gran_size: 32M chunk_size: 512M num_reg: 8 lose cover RAM: 23M Apr 11 17:25:36 kernel: gran_size: 32M chunk_size: 1G num_reg: 7 lose cover RAM: 23M Apr 11 17:25:36 kernel: gran_size: 32M chunk_size: 2G num_reg: 8 lose cover RAM: 23M Apr 11 17:25:36 kernel: gran_size: 64M chunk_size: 64M num_reg: 7 lose cover RAM: 55M Apr 11 17:25:36 kernel: gran_size: 64M chunk_size: 128M num_reg: 7 lose cover RAM: 55M Apr 11 17:25:36 kernel: gran_size: 64M chunk_size: 256M num_reg: 7 lose cover RAM: 55M Apr 11 17:25:36 kernel: gran_size: 64M chunk_size: 512M num_reg: 8 lose cover RAM: 55M Apr 11 17:25:36 kernel: gran_size: 64M chunk_size: 1G num_reg: 7 lose cover RAM: 55M Apr 11 17:25:36 kernel: gran_size: 64M chunk_size: 2G num_reg: 8 lose cover RAM: 55M Apr 11 17:25:36 kernel: gran_size: 128M chunk_size: 128M num_reg: 6 lose cover RAM: 119M Apr 11 17:25:36 kernel: gran_size: 128M chunk_size: 256M num_reg: 7 lose cover RAM: 119M Apr 11 17:25:36 kernel: gran_size: 128M chunk_size: 512M num_reg: 8 lose cover RAM: 119M Apr 11 17:25:36 kernel: gran_size: 128M chunk_size: 1G num_reg: 7 lose cover RAM: 119M Apr 11 17:25:36 kernel: gran_size: 128M chunk_size: 2G num_reg: 8 lose cover RAM: 119M Apr 11 17:25:36 kernel: gran_size: 256M chunk_size: 256M num_reg: 5 lose cover RAM: 247M Apr 11 17:25:36 kernel: gran_size: 256M chunk_size: 512M num_reg: 5 lose cover RAM: 247M Apr 11 17:25:36 kernel: gran_size: 256M chunk_size: 1G num_reg: 5 lose cover RAM: 247M Apr 11 17:25:36 kernel: gran_size: 256M chunk_size: 2G num_reg: 6 lose cover RAM: 247M Apr 11 17:25:36 kernel: gran_size: 512M chunk_size: 512M num_reg: 4 lose cover RAM: 503M Apr 11 17:25:36 kernel: gran_size: 512M chunk_size: 1G num_reg: 5 lose cover RAM: 503M Apr 11 17:25:36 kernel: gran_size: 512M chunk_size: 2G num_reg: 6 lose cover RAM: 503M Apr 11 17:25:36 kernel: gran_size: 1G chunk_size: 1G num_reg: 3 lose cover RAM: 1015M Apr 11 17:25:36 kernel: gran_size: 1G chunk_size: 2G num_reg: 3 lose cover RAM: 1015M Apr 11 17:25:36 kernel: gran_size: 2G chunk_size: 2G num_reg: 2 lose cover RAM: 2039M Apr 11 17:25:36 kernel: mtrr_cleanup: can not find optimal value Apr 11 17:25:36 kernel: please specify mtrr_gran_size/mtrr_chunk_size cat /proc/mtrr reg00: base=0x0d0000000 ( 3328MB), size= 256MB, count=1: uncachable reg01: base=0x0e0000000 ( 3584MB), size= 512MB, count=1: uncachable reg02: base=0x000000000 ( 0MB), size= 8192MB, count=1: write-back reg03: base=0x200000000 ( 8192MB), size= 512MB, count=1: write-back reg04: base=0x220000000 ( 8704MB), size= 256MB, count=1: write-back reg05: base=0x0cf700000 ( 3319MB), size= 1MB, count=1: uncachable reg06: base=0x0cf800000 ( 3320MB), size= 8MB, count=1: uncachable cat /proc/meminfo MemTotal: 8050140 kB Now with: Bios Memory remap feature: disabled cat /proc/meminfo MemTotal: 7276000 kB Apr 11 15:33:41 ns2 kernel: total RAM covered: 7415M Apr 11 15:33:41 ns2 kernel: Found optimal setting for mtrr clean up Apr 11 15:33:41 ns2 kernel: gran_size: 64K chunk_size: 16M num_reg: 6 lose cover RAM: 0G /proc/mtrr (bios memory remap disabled) reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back reg02: base=0x0c0000000 ( 3072MB), size= 256MB, count=1: write-back reg03: base=0x0cf700000 ( 3319MB), size= 1MB, count=1: uncachable reg04: base=0x0cf800000 ( 3320MB), size= 8MB, count=1: uncachable reg05: base=0x100000000 ( 4096MB), size= 4096MB, count=1: write-back reg06: base=0x0d0000000 ( 3328MB), size= 256MB, count=1: write-combining

2 2

CentOS-announce Digest, Vol 86, Issue 7
by centos-announce-request＠centos.org 12 Apr '12

12 Apr '12

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2012:0474 Moderate CentOS 5 tomcat5 Update (Johnny Hughes) 2. CESA-2012:0475 Moderate CentOS 6 tomcat6 Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 11 Apr 2012 19:16:37 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:0474 Moderate CentOS 5 tomcat5 Update To: centos-announce(a)centos.org Message-ID: <20120411191637.GA23538(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:0474 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2012-0474.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 677aab86c5faad3cc25e07d6fcdd53fd6fb4e8242b73f4a32712a1a80dedd6fd tomcat5-5.5.23-0jpp.31.el5_8.i386.rpm 55e26ac2b214de4b57c9b0a6c4c1fd2299c9835fa014eabf676779e26c304f33 tomcat5-admin-webapps-5.5.23-0jpp.31.el5_8.i386.rpm 6bcdf8cb158e5fc138b402ca880b6249670617042a0aada816ae03b1592b8ca8 tomcat5-common-lib-5.5.23-0jpp.31.el5_8.i386.rpm e5c65e3a50790835f2162fd8bf1f4437b91abd5840ef0e77271d4bc8b181930d tomcat5-jasper-5.5.23-0jpp.31.el5_8.i386.rpm ead6379bbb33dd3d3667d115327f9a1a7125aa7fe102e6dfea82ea8041f63f3d tomcat5-jasper-javadoc-5.5.23-0jpp.31.el5_8.i386.rpm 94c4b03230c5117156a9688577e80fcae51215f49745a13e78a20f2da0e98c52 tomcat5-jsp-2.0-api-5.5.23-0jpp.31.el5_8.i386.rpm d4f83bcdda017f21141015d3916ec98addfc8d2dd41e89d0b680dd7f4938b0af tomcat5-jsp-2.0-api-javadoc-5.5.23-0jpp.31.el5_8.i386.rpm 6ca2b63866656bb8f9f770fb512191dba0880b39288fe3a60f1198fbb9968b93 tomcat5-server-lib-5.5.23-0jpp.31.el5_8.i386.rpm 2453bd661c35aa866f773add148258255a4a23ce4d56937c7e358f36b651b161 tomcat5-servlet-2.4-api-5.5.23-0jpp.31.el5_8.i386.rpm e784ecf1cca6810ee234e8aa6668df952db59efcaf8387dccc612f0f8df91e33 tomcat5-servlet-2.4-api-javadoc-5.5.23-0jpp.31.el5_8.i386.rpm 22e71457a2a5af9dbbaf33467e0f0f2f925758e9e4ee1a8f9872039e8ccb9f41 tomcat5-webapps-5.5.23-0jpp.31.el5_8.i386.rpm x86_64: e38d54727cda210978acd8de956ef1bfd043ac07bd42dd1046fe7bd268e4dbec tomcat5-5.5.23-0jpp.31.el5_8.x86_64.rpm 9ecf46f19443096dfb36f711d6dafc60d2dc662d59ff31ec1dfa31adc2a37b12 tomcat5-admin-webapps-5.5.23-0jpp.31.el5_8.x86_64.rpm 4a51457a1fd9990dd75a54a948b9bb5fa0e661b0c84588633bb45376558d6f6f tomcat5-common-lib-5.5.23-0jpp.31.el5_8.x86_64.rpm 007007a9beef1b8e7dbc1d1f20e62e5134c1714e9f650f7d2bf396302cbb9c20 tomcat5-jasper-5.5.23-0jpp.31.el5_8.x86_64.rpm 7d79042a574270e29a72bb17fc656fea592bf357a65d3989d94c222b773c09df tomcat5-jasper-javadoc-5.5.23-0jpp.31.el5_8.x86_64.rpm d8157c65e93c697494f01fd18772c9256680bb4a4535d892273b63c281cb3493 tomcat5-jsp-2.0-api-5.5.23-0jpp.31.el5_8.x86_64.rpm 4ce03eb51bdf8bc00044f7c3ba54ac73534de566d5fa2be1a6a8809523d1b91a tomcat5-jsp-2.0-api-javadoc-5.5.23-0jpp.31.el5_8.x86_64.rpm 23e98b5e65059582403a8d792cc59fbe613318f93edf8f57828f1b057f78c66f tomcat5-server-lib-5.5.23-0jpp.31.el5_8.x86_64.rpm 20b9f1110dbe2f1e5229f0b21bf9112d2c5fe9676de16374cd72a236291f4bc0 tomcat5-servlet-2.4-api-5.5.23-0jpp.31.el5_8.x86_64.rpm ce532e3efdc63fda701158b0ee3b6af59be4492a1b1ff1d6d14e4092abdadd57 tomcat5-servlet-2.4-api-javadoc-5.5.23-0jpp.31.el5_8.x86_64.rpm 80a2ff2e617dc51e247dcfd63a900cae784ac80f69130b279b2f337bc1f30625 tomcat5-webapps-5.5.23-0jpp.31.el5_8.x86_64.rpm Source: 58e94b9bc8dd59d494fed7476ab279b8f3f792fffefbf8f490bb6b773dc6b355 tomcat5-5.5.23-0jpp.31.el5_8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 11 Apr 2012 20:13:41 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:0475 Moderate CentOS 6 tomcat6 Update To: centos-announce(a)centos.org Message-ID: <20120411201341.GA26692(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:0475 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2012-0475.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 74270df5268ece50d978c615795eab1671a142b3bf900d54095fbab2b447f42c tomcat6-6.0.24-36.el6_2.noarch.rpm cf3c4d2abbd7a6bfc1a96aa06e022274c89643cd00e2d2b5b6cedfbcc159e235 tomcat6-admin-webapps-6.0.24-36.el6_2.noarch.rpm 5a7e87389b0194d65cf2b62bbe309f235070683789e9183f6d0c0257099fca9b tomcat6-docs-webapp-6.0.24-36.el6_2.noarch.rpm 60bf53ad8baa5d6d033a84f6b85e06a4afdfdd07c0b70eebc5adb41b0ad2062c tomcat6-el-2.1-api-6.0.24-36.el6_2.noarch.rpm 35ab12080f1f172c7dcc3235fe5e9439b9e3d4321e22f9f80a125b5042f4ced8 tomcat6-javadoc-6.0.24-36.el6_2.noarch.rpm f68e6d247f8ec8781644001957826d1247dc04f9c04164134c9ee7fec421189e tomcat6-jsp-2.1-api-6.0.24-36.el6_2.noarch.rpm f868d3d378d85e7114309ac1bcc6edb9285a15ec25d25eceb66e3ff9236e6c04 tomcat6-lib-6.0.24-36.el6_2.noarch.rpm 30522f9653a242b10594b63f4e70e1be6031f86c7fe77ebfbf8c75d948cb3ad4 tomcat6-servlet-2.5-api-6.0.24-36.el6_2.noarch.rpm a107c27695891977bd4c1f2c87033720809996177e4e4177ffe9f79285983bb8 tomcat6-webapps-6.0.24-36.el6_2.noarch.rpm x86_64: d7d1ca95551a544bcfc72de89655ddc32359747c63fd105c1f33afe18d578ea8 tomcat6-6.0.24-36.el6_2.noarch.rpm 5902bba8182f98018fdf1f89d0c281e2099d1eef9ea95ec1efa74c507878439a tomcat6-admin-webapps-6.0.24-36.el6_2.noarch.rpm 0447f92c911e85ca53fc5674bcdbabd0fcedf63d9c1a7edd77c430386a07c05b tomcat6-docs-webapp-6.0.24-36.el6_2.noarch.rpm 3a3eef5645c5c66a63c14c23c13455f05896fa38ce5b01631c58732301d7d578 tomcat6-el-2.1-api-6.0.24-36.el6_2.noarch.rpm 0c8607543c3bce13fd057914151039323535109df9cf26737c1b225772c31e46 tomcat6-javadoc-6.0.24-36.el6_2.noarch.rpm c6773a21e7d6158f650add40ad1b2410f7fc848f619daf5241b96e7566e86ff5 tomcat6-jsp-2.1-api-6.0.24-36.el6_2.noarch.rpm eaa97269281b7537777c6879fb8a8ff6513b9dbc56630f0c6d47a301a9f717cf tomcat6-lib-6.0.24-36.el6_2.noarch.rpm fa32c69282562c0a6e22e64e5b7e4e23d546bd70b05b8df171f248ffa3c7ae0c tomcat6-servlet-2.5-api-6.0.24-36.el6_2.noarch.rpm 4da49f3e1b0887b571a209eaf3f1905475aeb1fea95889db168068bcbf769939 tomcat6-webapps-6.0.24-36.el6_2.noarch.rpm Source: fd68b8c5cc07ed65b81e6d242c51b8001e4b215960b307282931f2ab05099ccb tomcat6-6.0.24-36.el6_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 86, Issue 7 **********************************************

1 0

URGENT -- pseudo network interface creating problem with dhcp-- centos 5.5
by sri 12 Apr '12

12 Apr '12

Group, My linux box, running with Centos-5.5, is showing up (??) a pseudo network interface for Eth0. On Switch where my Eth0 is connected, observed 2 MAC-Addresses. If a DHCP server present in LAN, the second pseudo interface is picking up a DHCP IP Address too. Furthermore you can ping both Eth0 ip and Psedo Eth0 IP from the switch. The intensity of the problem is more when port-security is configured on SW for that port. “ifconfig –a” is not showing that pseudo interface. >From dmesg output, no new things observed related while detecting the eth0 NIC during bootup. Only proof for this pseudo inerface’s mac address is SW showing it (on the SW port connected to my box eth0) in “show mac address-table” output Is there anything that I have to check to nail down the issue. Any pointers are highly appreciated. -- -- Krishna Mohan B

6 9

quickly setting /etc/rc levels
by aurfalien 11 Apr '12

11 Apr '12

Hi all, I vaguely recall being able to auto set various /etc/rc levels based on /etc/init.d/scriptname. I am about to create the sym links by hand but wondering if any one has a shortcut to auto set the links? Thanks in advance, - aurf

3 3

Giving back
by Jason Pyeron 11 Apr '12

11 Apr '12

I noticed the donations page has never recovered, what is the prefered way of giving back these days? -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - - - Jason Pyeron PD Inc. http://www.pdinc.us - - Principal Consultant 10 West 24th Street #100 - - +1 (443) 269-1555 x333 Baltimore, Maryland 21218 - - - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- This message is copyright PD Inc, subject to license 20080407P00.

1 0

How to fix a chown oops...
by Jason Pyeron 11 Apr '12

11 Apr '12

chown -R 7.0 /sbin/ chown -R 98.98 // Is there a rpm way fix all the permissions of files managed by rpms? -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - - - Jason Pyeron PD Inc. http://www.pdinc.us - - Principal Consultant 10 West 24th Street #100 - - +1 (443) 269-1555 x333 Baltimore, Maryland 21218 - - - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- This message is copyright PD Inc, subject to license 20080407P00.

2 2

CentOS 5 - problem with kernel/process: task blocked for more than 120 seconds.
by Rafał Radecki 11 Apr '12

11 Apr '12

Hi All. I have a server which hanged two times because we could not connect to the box, it was not responding. In /var/log/messages I saw: Apr 11 10:13:29 server kernel: INFO: task imap:5855 blocked for more than 120 seconds. Apr 11 10:13:29 server kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Apr 11 10:13:29 server kernel: imap D 000124D0 1716 5855 14393 6320 5839 (NOTLB) Apr 11 10:13:29 server kernel: d1adeed0 00000082 632f304d 000124d0 000124cf 0000000e 00000000 00000009 Apr 11 10:13:29 server kernel: c750b000 632f379a 000124d0 0000074d 00000000 c750b10c c17f6d00 d2637580 Apr 11 10:13:29 server kernel: f75d3e68 00000000 00000000 d1adeecc c041ec40 00000000 d1adeed8 f75d3e50 Apr 11 10:13:29 server kernel: Call Trace: Apr 11 10:13:29 server kernel: [<c041ec40>] __wake_up+0x2a/0x3d Apr 11 10:13:29 server kernel: [<c0436d23>] prepare_to_wait+0x24/0x46 Apr 11 10:13:29 server kernel: [<f885f1e2>] log_wait_commit+0x80/0xc7 [jbd] Apr 11 10:13:29 server kernel: [<c0436bd7>] autoremove_wake_function+0x0/0x2d Apr 11 10:13:29 server kernel: [<f885a661>] journal_stop+0x195/0x1ba [jbd] Apr 11 10:13:29 server kernel: [<c0495caa>] __writeback_single_inode+0x197/0x2a3 Apr 11 10:13:29 server kernel: [<c045ee18>] do_writepages+0x2b/0x32 Apr 11 10:13:29 server kernel: [<c045a96c>] __filemap_fdatawrite_range+0x66/0x72 Apr 11 10:13:29 server kernel: [<c0496346>] sync_inode+0x19/0x24 Apr 11 10:13:29 server kernel: [<f8983009>] ext3_sync_file+0xb1/0xdc [ext3] Apr 11 10:13:29 server kernel: [<c047956c>] do_fsync+0x41/0x83 Apr 11 10:13:29 server kernel: [<c04795cb>] __do_fsync+0x1d/0x2b Apr 11 10:13:29 server kernel: [<c0404f4b>] syscall_call+0x7/0xb Apr 11 10:13:29 server kernel: ======================= Apr 11 10:13:29 server kernel: INFO: task imap:6882 blocked for more than 120 seconds. Apr 11 10:13:29 server kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Apr 11 10:13:29 server kernel: imap D 000124D0 1772 6882 14393 6999 6053 (NOTLB) Apr 11 10:13:29 server kernel: cf1d0ed0 00000082 632f379a 000124d0 000124cc 0000000e 00000000 00000009 Apr 11 10:13:29 server kernel: f52e9000 632f3f0a 000124d0 00000770 00000000 f52e910c c17f6d00 cbe44740 Apr 11 10:13:29 server kernel: f75d3e68 00000000 00000000 cf1d0ecc c041ec40 00000000 cf1d0ed8 f75d3e50 Apr 11 10:13:29 server kernel: Call Trace: Apr 11 10:13:29 server kernel: [<c041ec40>] __wake_up+0x2a/0x3d Apr 11 10:13:29 server kernel: [<c0436d23>] prepare_to_wait+0x24/0x46 Apr 11 10:13:31 server kernel: [<f885f1e2>] log_wait_commit+0x80/0xc7 [jbd] Apr 11 10:13:31 server kernel: [<c0436bd7>] autoremove_wake_function+0x0/0x2d Apr 11 10:13:31 server kernel: [<f885a661>] journal_stop+0x195/0x1ba [jbd] Apr 11 10:13:31 server kernel: [<c0495caa>] __writeback_single_inode+0x197/0x2a3 Apr 11 10:13:31 server kernel: [<c045ee18>] do_writepages+0x2b/0x32 Apr 11 10:13:31 server kernel: [<c045a96c>] __filemap_fdatawrite_range+0x66/0x72 Apr 11 10:13:31 server kernel: [<c0496346>] sync_inode+0x19/0x24 Apr 11 10:13:31 server kernel: [<f8983009>] ext3_sync_file+0xb1/0xdc [ext3] Apr 11 10:13:31 server kernel: [<c047956c>] do_fsync+0x41/0x83 Apr 11 10:13:31 server kernel: [<c04795cb>] __do_fsync+0x1d/0x2b Apr 11 10:13:31 server kernel: [<c0404f4b>] syscall_call+0x7/0xb Apr 11 10:13:31 server kernel: ======================= I have found: http://www.nico.schottelius.org/blog/reboot-linux-if-task-blocked-for-more-…, so I think that the processes took all resources of the machine. What should be done to troubleshoot the situation? I have information that probably imap:5855 and imap:6882 caused the problem. How the output: Apr 11 10:13:29 server kernel: imap D 000124D0 1772 6882 14393 6999 6053 (NOTLB) Apr 11 10:13:29 server kernel: cf1d0ed0 00000082 632f379a 000124d0 000124cc 0000000e 00000000 00000009 Apr 11 10:13:29 server kernel: f52e9000 632f3f0a 000124d0 00000770 00000000 f52e910c c17f6d00 cbe44740 Apr 11 10:13:29 server kernel: f75d3e68 00000000 00000000 cf1d0ecc c041ec40 00000000 cf1d0ed8 f75d3e50 Apr 11 10:13:29 server kernel: Call Trace: Apr 11 10:13:29 server kernel: [<c041ec40>] __wake_up+0x2a/0x3d Apr 11 10:13:29 server kernel: [<c0436d23>] prepare_to_wait+0x24/0x46 Apr 11 10:13:31 server kernel: [<f885f1e2>] log_wait_commit+0x80/0xc7 [jbd] Apr 11 10:13:31 server kernel: [<c0436bd7>] autoremove_wake_function+0x0/0x2d Apr 11 10:13:31 server kernel: [<f885a661>] journal_stop+0x195/0x1ba [jbd] Apr 11 10:13:31 server kernel: [<c0495caa>] __writeback_single_inode+0x197/0x2a3 Apr 11 10:13:31 server kernel: [<c045ee18>] do_writepages+0x2b/0x32 Apr 11 10:13:31 server kernel: [<c045a96c>] __filemap_fdatawrite_range+0x66/0x72 Apr 11 10:13:31 server kernel: [<c0496346>] sync_inode+0x19/0x24 Apr 11 10:13:31 server kernel: [<f8983009>] ext3_sync_file+0xb1/0xdc [ext3] Apr 11 10:13:31 server kernel: [<c047956c>] do_fsync+0x41/0x83 Apr 11 10:13:31 server kernel: [<c04795cb>] __do_fsync+0x1d/0x2b Apr 11 10:13:31 server kernel: [<c0404f4b>] syscall_call+0x7/0xb should be read? Any howto? Best regards, Rafal Radecki.

4 7

CentOS-announce Digest, Vol 86, Issue 6
by centos-announce-request＠centos.org 11 Apr '12

11 Apr '12

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2012:0467 Important CentOS 5 freetype Update (Johnny Hughes) 2. CESA-2012:0468 Important CentOS 5 libtiff Update (Johnny Hughes) 3. CESA-2012:0466 Critical CentOS 5 samba3x Update (Johnny Hughes) 4. CESA-2012:0465 Critical CentOS 5 samba Update (Johnny Hughes) 5. CESA-2012:0467 Important CentOS 6 freetype Update (Johnny Hughes) 6. CESA-2012:0468 Important CentOS 6 libtiff Update (Johnny Hughes) 7. CESA-2012:0465 Critical CentOS 6 samba Update (Johnny Hughes) 8. CEBA-2012:0471 CentOS 5 esc Update (Johnny Hughes) 9. CEBA-2012:0473 CentOS 6 rsync FASTTRACK Update (Johnny Hughes) 10. CEBA-2012:0472 CentOS 6 esc Update (Johnny Hughes) 11. CEBA-2012:0470 CentOS 6 squid Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 10 Apr 2012 21:09:43 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:0467 Important CentOS 5 freetype Update To: centos-announce(a)centos.org Message-ID: <20120410210943.GA22342(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:0467 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2012-0467.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 5c3bcd37d35ac8b14585d84f8ffeddb407b817f1c1d1108537cea5ff4b8a02bd freetype-2.2.1-31.el5_8.1.i386.rpm 07a0de6442362d343297ad5671a61665682860ccbac3df078d53f0db2271e707 freetype-demos-2.2.1-31.el5_8.1.i386.rpm adfed04ac8c8b898fb236a1b5157542306dee9d48cc639b6d81be78272f26e9c freetype-devel-2.2.1-31.el5_8.1.i386.rpm x86_64: 5c3bcd37d35ac8b14585d84f8ffeddb407b817f1c1d1108537cea5ff4b8a02bd freetype-2.2.1-31.el5_8.1.i386.rpm 521197fb3b1175d20b2063fa5693a5ba881b03288f7b5674ba80ddd885c00c3a freetype-2.2.1-31.el5_8.1.x86_64.rpm 03b2d7c8f28e42a34476c1e9384850dc74046f89b0384a00f02389bb9ed0c059 freetype-demos-2.2.1-31.el5_8.1.x86_64.rpm adfed04ac8c8b898fb236a1b5157542306dee9d48cc639b6d81be78272f26e9c freetype-devel-2.2.1-31.el5_8.1.i386.rpm 16356930bf03893a1e1346eafa8f933cae2732e685ab528c883cf8234250c71f freetype-devel-2.2.1-31.el5_8.1.x86_64.rpm Source: cd8522cf761087b5d6462252cecb754aac14ad72a5c87796877bc64a0c07b444 freetype-2.2.1-31.el5_8.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Tue, 10 Apr 2012 21:10:32 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:0468 Important CentOS 5 libtiff Update To: centos-announce(a)centos.org Message-ID: <20120410211032.GA22464(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:0468 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2012-0468.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 8eec7fcca0afbb1e3756557076a7b7d29b3fa437c685902646ea6aad9f7e2e04 libtiff-3.8.2-14.el5_8.i386.rpm 7305b0afe6b377d92d0c6957ed540d461fdee3c255120c751d82f480178dfb3a libtiff-devel-3.8.2-14.el5_8.i386.rpm x86_64: 8eec7fcca0afbb1e3756557076a7b7d29b3fa437c685902646ea6aad9f7e2e04 libtiff-3.8.2-14.el5_8.i386.rpm c1c15176dd5d4dd7e8a917ac3befe84441516b0e77545e94ac7a68b821c09f74 libtiff-3.8.2-14.el5_8.x86_64.rpm 7305b0afe6b377d92d0c6957ed540d461fdee3c255120c751d82f480178dfb3a libtiff-devel-3.8.2-14.el5_8.i386.rpm 00dbba5e14aa0adea3536f0951c9d8bf3b4e693ed6283435330d0c60c23bf8ee libtiff-devel-3.8.2-14.el5_8.x86_64.rpm Source: 0f9a50b0cfe979b3b9d032c3986d7b0ecf7a56be00a852caf489178a5fe7be74 libtiff-3.8.2-14.el5_8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Tue, 10 Apr 2012 21:13:02 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:0466 Critical CentOS 5 samba3x Update To: centos-announce(a)centos.org Message-ID: <20120410211302.GA22637(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:0466 Critical Upstream details at : https://rhn.redhat.com/errata/RHSA-2012-0466.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: bd761bf38e7466f89f612824f8ac73fe2558ca218a1fca167285f525c2fd58da samba3x-3.5.10-0.108.el5_8.i386.rpm 187690215f711a1e3ee1ee2e3f6c927b205737950d5edac5bc79aca9d266c518 samba3x-client-3.5.10-0.108.el5_8.i386.rpm e59b35c4abec710b01aeafd8d2ffc4998954b2a00b78c0e3423827a6722b6042 samba3x-common-3.5.10-0.108.el5_8.i386.rpm f6cb9ee15dff2db558966eae585624c2193ae075d8e8b0db226a4dfe718f0c8c samba3x-doc-3.5.10-0.108.el5_8.i386.rpm 97ad6abbd991b6cf5ddf00ecefa61a8d94a5c0f4e3a0880fe405ab7f2da64125 samba3x-domainjoin-gui-3.5.10-0.108.el5_8.i386.rpm e3595612f05b92b691d002304d9b9296693129b864cdfc9a8879f6534a034d82 samba3x-swat-3.5.10-0.108.el5_8.i386.rpm f2a603e8eb3c261debda5bad7e6e5e3722f4025063d8fd3c9a347929e048237d samba3x-winbind-3.5.10-0.108.el5_8.i386.rpm 9f2cb6b013fc27168361611dc7380b194ccb3fb4759bd78facd53144f0450366 samba3x-winbind-devel-3.5.10-0.108.el5_8.i386.rpm x86_64: 7a3f0c19b87ad09ba4ed82a5dfa0a00012d5dcbebad763dd507f11d1d3bf6364 samba3x-3.5.10-0.108.el5_8.x86_64.rpm 8f6998fc2edb997279376c3d7b5ec9657b2ceb2c13b5a3f6efd10b14fbdbcd2a samba3x-client-3.5.10-0.108.el5_8.x86_64.rpm aa60f7882a6b19dd3e211881689756225593d97cb0a0818166a483e8288db000 samba3x-common-3.5.10-0.108.el5_8.x86_64.rpm 743d8bd33ea878e20323d8664ee156f20727bf4988f99ccceaf92370b333f1b8 samba3x-doc-3.5.10-0.108.el5_8.x86_64.rpm 6bb6cf22025733eb5b62423633f1a844bd67a5f293ce577a390b42bce0eee0ea samba3x-domainjoin-gui-3.5.10-0.108.el5_8.x86_64.rpm a560da842d9905ffc3f38d7088895b01769c8a5b740a2a1bbbc9eac5870c9f38 samba3x-swat-3.5.10-0.108.el5_8.x86_64.rpm f2a603e8eb3c261debda5bad7e6e5e3722f4025063d8fd3c9a347929e048237d samba3x-winbind-3.5.10-0.108.el5_8.i386.rpm 8df23d2374c4a2400ac3e6c120219a7b5d2b8dd2c170d40ea33e91003de7ff90 samba3x-winbind-3.5.10-0.108.el5_8.x86_64.rpm 9f2cb6b013fc27168361611dc7380b194ccb3fb4759bd78facd53144f0450366 samba3x-winbind-devel-3.5.10-0.108.el5_8.i386.rpm 759eeeec44400ffc1a98eb1b86aeddb15629e12ce470ab417bbb985a3be84912 samba3x-winbind-devel-3.5.10-0.108.el5_8.x86_64.rpm Source: 91e5b1274b502bbeaca0bc1c3f0ce07b7a1a23ce39390da473e96aca2bd349b0 samba3x-3.5.10-0.108.el5_8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Tue, 10 Apr 2012 21:30:27 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:0465 Critical CentOS 5 samba Update To: centos-announce(a)centos.org Message-ID: <20120410213027.GA24147(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:0465 Critical Upstream details at : http://rhn.redhat.com/errata/RHSA-2012-0465.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 50fc234754d886f8147c22ed2b034d1f7be84dd78c10a8280699265a9c542cfa libsmbclient-3.0.33-3.39.el5_8.i386.rpm 62c20ba55a5213be09a2250454274f1fbf6aa854e84d78aaa1f75aec5d2a1920 libsmbclient-devel-3.0.33-3.39.el5_8.i386.rpm 294d346782344d32018a02ac25c9def811cbaced00ce19c0ca7c193d4f68d0c0 samba-3.0.33-3.39.el5_8.i386.rpm b792d801b4d57882b7c3f398d44b378446d6be48a07b12b265f07dc25564db13 samba-client-3.0.33-3.39.el5_8.i386.rpm 77a3666353bbc27ff71b1d4e34882459c5b440f783f21bb3c0adc3898ef501fb samba-common-3.0.33-3.39.el5_8.i386.rpm 1bea83056056c3da0dc568f13655c61c6b14f56957e7180aaaa4d6d8f26f7c82 samba-swat-3.0.33-3.39.el5_8.i386.rpm x86_64: 50fc234754d886f8147c22ed2b034d1f7be84dd78c10a8280699265a9c542cfa libsmbclient-3.0.33-3.39.el5_8.i386.rpm 61b5237a09f59a445730e994517ad565fb24da1e9bf07b5e6b7b8c80ac6ca588 libsmbclient-3.0.33-3.39.el5_8.x86_64.rpm 62c20ba55a5213be09a2250454274f1fbf6aa854e84d78aaa1f75aec5d2a1920 libsmbclient-devel-3.0.33-3.39.el5_8.i386.rpm 5c973b1c9c0a986989805afe6f600a48a76d9d6175e92896065591795516a157 libsmbclient-devel-3.0.33-3.39.el5_8.x86_64.rpm 55ee35ca8dc332e0bea6299ce2eed90d7b9460ae312a8abf42822cd0a737c555 samba-3.0.33-3.39.el5_8.x86_64.rpm 70200f37cfe741d94e9bb9060f9f2128d08a90ac6b6674f97a9adb474ea3f41b samba-client-3.0.33-3.39.el5_8.x86_64.rpm 77a3666353bbc27ff71b1d4e34882459c5b440f783f21bb3c0adc3898ef501fb samba-common-3.0.33-3.39.el5_8.i386.rpm 16e9165d7d3f3099d45f6389a58f7ebc87642856414506728e5d8f0466e343a3 samba-common-3.0.33-3.39.el5_8.x86_64.rpm e4f6f354d8a38ffb4f17af0be3736be3a9e055ba3e6ddff5f21a547fb8924d4f samba-swat-3.0.33-3.39.el5_8.x86_64.rpm Source: 4e4b6d761aed021020fe8ac82340ba78f835fc4610516ee8564da347ac735e22 samba-3.0.33-3.39.el5_8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Tue, 10 Apr 2012 23:57:59 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:0467 Important CentOS 6 freetype Update To: centos-announce(a)centos.org Message-ID: <20120410235759.GA30264(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:0467 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2012-0467.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 94f34641498c450a113a276feb32c587b04a1c4372f25ea0b1043c07867e59cf freetype-2.3.11-6.el6_2.9.i686.rpm 853abcc7252ef5ab98d35e9bb0b2949c1296806c34225591b532b36f2a2e0110 freetype-demos-2.3.11-6.el6_2.9.i686.rpm 498e8410fcf547a0635865630839966d79819e57937b6096c10e117ad74fe6d2 freetype-devel-2.3.11-6.el6_2.9.i686.rpm x86_64: 94f34641498c450a113a276feb32c587b04a1c4372f25ea0b1043c07867e59cf freetype-2.3.11-6.el6_2.9.i686.rpm a19f127ce0cbb7586e1651c24a47b73b2cda4ba2092e22b8e3516c331cde7328 freetype-2.3.11-6.el6_2.9.x86_64.rpm f21461a7ec1bfdf9dbd52eb19e28352f5070afdde055eb8c247fb3eb7d783464 freetype-demos-2.3.11-6.el6_2.9.x86_64.rpm 498e8410fcf547a0635865630839966d79819e57937b6096c10e117ad74fe6d2 freetype-devel-2.3.11-6.el6_2.9.i686.rpm f5ee8c8144fb5aec56eb1c55d2c86aa9b631a84c58391e2809e200584438855a freetype-devel-2.3.11-6.el6_2.9.x86_64.rpm Source: 3f27f46aa39d8ccaf29dcf4b369e090ca561d8d1af72266a52723a46025c762a freetype-2.3.11-6.el6_2.9.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Tue, 10 Apr 2012 23:58:23 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:0468 Important CentOS 6 libtiff Update To: centos-announce(a)centos.org Message-ID: <20120410235823.GA30350(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:0468 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2012-0468.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: cf96e1605e46ed60289c43a173b7ef01a39ff250ed3815e892822b48180fdbc5 libtiff-3.9.4-5.el6_2.i686.rpm 18b9095174e948752e835824641890d64dc7c91167070fcbdc4dda55c1310dea libtiff-devel-3.9.4-5.el6_2.i686.rpm 620d02429ec4073a55ef17d01312914e6253c59c291cc71f1f555af7043b594e libtiff-static-3.9.4-5.el6_2.i686.rpm x86_64: cf96e1605e46ed60289c43a173b7ef01a39ff250ed3815e892822b48180fdbc5 libtiff-3.9.4-5.el6_2.i686.rpm e7dd8a9838694160c267b3921aed63c054d256b2fc06eca79659e5257d52d6f1 libtiff-3.9.4-5.el6_2.x86_64.rpm 18b9095174e948752e835824641890d64dc7c91167070fcbdc4dda55c1310dea libtiff-devel-3.9.4-5.el6_2.i686.rpm ab72dc1e95bd9d508d1178744b6d2ca91678ae2836404c7d2ae56a7340ac43e0 libtiff-devel-3.9.4-5.el6_2.x86_64.rpm 2c7d052fda25bbcb26e83f8cbafca0eccfcb7cacc3e5f3a2b9e8941c2805d755 libtiff-static-3.9.4-5.el6_2.x86_64.rpm Source: 4619727a33bba803a000585dc7ba0f931cb00ea941de451e68ed0019ff13e6f9 libtiff-3.9.4-5.el6_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 7 Date: Tue, 10 Apr 2012 23:59:51 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:0465 Critical CentOS 6 samba Update To: centos-announce(a)centos.org Message-ID: <20120410235951.GA30485(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:0465 Critical Upstream details at : http://rhn.redhat.com/errata/RHSA-2012-0465.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 6b029647ee1d0d9008da480790e1d53df52bc882c094dab3d8cddcba94d73ab0 libsmbclient-3.5.10-115.el6_2.i686.rpm f53cfbd2add2eb0dd917cf4cc19adedacea81dafd69552ffbeab274a2d5610aa libsmbclient-devel-3.5.10-115.el6_2.i686.rpm b7579d7882925d6af2daf463ae8a40e331b41b78a12c02001cabdb04d4bac49d samba-3.5.10-115.el6_2.i686.rpm bd3eddee33a28f5ea763bd5fa9a78a1bd671f947a0bed9bd774b34e31e0a4c0f samba-client-3.5.10-115.el6_2.i686.rpm 868daccf0ca2bf4d6f968130e552177bb59fede56bad48bdd472c0f204b8b936 samba-common-3.5.10-115.el6_2.i686.rpm 020b318b443c5cf5457a31632748d3f498c79c409ecb957e6c0b14254d52c907 samba-doc-3.5.10-115.el6_2.i686.rpm de551136c16ad9d87af212bc463a241a4c0a7df1fe09f77be4d0aeeb55b35cc1 samba-domainjoin-gui-3.5.10-115.el6_2.i686.rpm 5c5e112ec57e52bf718fdc29a64ea2543ea7ca75db2cb1229cac3c8aab0f01bd samba-swat-3.5.10-115.el6_2.i686.rpm e1e6d3e84937d3b9cba7e64350fb12dec740176b60e8dc61417e207694018944 samba-winbind-3.5.10-115.el6_2.i686.rpm b1f1ee45411bcfbece7f93a5956c7b09350e6c3b9fd4efb80715067d21abc3b5 samba-winbind-clients-3.5.10-115.el6_2.i686.rpm 5e1cc9dee6628781e12768a7de2f9680b004893bdff5d11809d57278d8f1e9dd samba-winbind-devel-3.5.10-115.el6_2.i686.rpm 2f96f49215fd4a9f91e64e2685e33a7db5e4462118c1efe04e09687d608d7cb2 samba-winbind-krb5-locator-3.5.10-115.el6_2.i686.rpm x86_64: 6b029647ee1d0d9008da480790e1d53df52bc882c094dab3d8cddcba94d73ab0 libsmbclient-3.5.10-115.el6_2.i686.rpm d3a2709c8f30e1bfe03f372055a02a7e1492b91875213e64292485144258b23b libsmbclient-3.5.10-115.el6_2.x86_64.rpm f53cfbd2add2eb0dd917cf4cc19adedacea81dafd69552ffbeab274a2d5610aa libsmbclient-devel-3.5.10-115.el6_2.i686.rpm 6b9c17858c5c6ddda1d7149e0bce409392484eecf59a2d5cfb40b2e3159d5f5e libsmbclient-devel-3.5.10-115.el6_2.x86_64.rpm 1758876b11e32166653e98ce397d2787ea03cd8227e131c66c709427e12b283b samba-3.5.10-115.el6_2.x86_64.rpm 38c7d303a54cc11dd61c44b6d7e6a6fbbc1e29b66270b849637b9f769ede1e95 samba-client-3.5.10-115.el6_2.x86_64.rpm 868daccf0ca2bf4d6f968130e552177bb59fede56bad48bdd472c0f204b8b936 samba-common-3.5.10-115.el6_2.i686.rpm d416e713261bbf3749ce764909e98478416fec6420d9753b60e0ec9ac59ea8a0 samba-common-3.5.10-115.el6_2.x86_64.rpm 414870c0889e5ca7e8cbb89c248f60acd8eac17dc7258e41270a93e223bd3312 samba-doc-3.5.10-115.el6_2.x86_64.rpm 83a6e89cbd5aef4e18c38adfc74fcc232e58ba6f051ddd75fe11cb03aa346478 samba-domainjoin-gui-3.5.10-115.el6_2.x86_64.rpm b1af4d7fca21a975172b33b9627bf4b96398162a06d4bc18af9f09e9b0d33b76 samba-swat-3.5.10-115.el6_2.x86_64.rpm 23526724fb673917a3836d2dd4402da00df88e90aa4f2eb9b376dd042d9ac0ef samba-winbind-3.5.10-115.el6_2.x86_64.rpm b1f1ee45411bcfbece7f93a5956c7b09350e6c3b9fd4efb80715067d21abc3b5 samba-winbind-clients-3.5.10-115.el6_2.i686.rpm e78f390c6ad8b7142be6b1abf77c14f1363ed1b841b87c29201857cf8a535663 samba-winbind-clients-3.5.10-115.el6_2.x86_64.rpm 5e1cc9dee6628781e12768a7de2f9680b004893bdff5d11809d57278d8f1e9dd samba-winbind-devel-3.5.10-115.el6_2.i686.rpm 23a8c1552d6e0433a4d9565da3372f4c63e117cd9dae5d8ce200e4e725e220fd samba-winbind-devel-3.5.10-115.el6_2.x86_64.rpm 8fea14b03ce73c2f4113b0119b87028fd1262d4d9a538f70fef9eca4355ccee2 samba-winbind-krb5-locator-3.5.10-115.el6_2.x86_64.rpm Source: 04c80fa33208126932dab687dc581afd73abef10efeebd60a2628062ff416007 samba-3.5.10-115.el6_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 8 Date: Wed, 11 Apr 2012 13:07:37 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0471 CentOS 5 esc Update To: centos-announce(a)centos.org Message-ID: <20120411130737.GA5153(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0471 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0471.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 64e85944d8aad47d30a91f0ba106db11c6dd6b60abcf3ab517a7a3c9c482bcd3 esc-1.1.0-13.el5_8.2.i386.rpm x86_64: b4f0d2de35c8e5bddf8ee8f8d17f2ec63d4d1f72b5dce90a796dfc2504de7496 esc-1.1.0-13.el5_8.2.x86_64.rpm Source: edacc569f929258fa4e1487cc1a5c082bd65e5d5e615cbd42ce31e3467d979cb esc-1.1.0-13.el5_8.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 9 Date: Wed, 11 Apr 2012 13:36:37 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0473 CentOS 6 rsync FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20120411133637.GA6733(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0473 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0473.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 6818834beaa8c255f8739c93a4267b58cc86130672738d324e56da704c9eb142 rsync-3.0.6-9.el6.i686.rpm x86_64: 1f8194d4a39e769aa278b14452a3a7dd51b05b35de8909f7bdd045d636503dbf rsync-3.0.6-9.el6.x86_64.rpm Source: 9f383953926e93a36c16878eb1a4649db6e883f0f79d87b519c85203f9159cc7 rsync-3.0.6-9.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 10 Date: Wed, 11 Apr 2012 14:15:00 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0472 CentOS 6 esc Update To: centos-announce(a)centos.org Message-ID: <20120411141500.GA8309(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0472 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0472.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 4ca6eeda2f0a7b149222b014e54dbbdbec2cf0bb863d6e41e979e7e9b69034a4 esc-1.1.0-24.el6_2.2.i686.rpm x86_64: f65c70a19bd28f63720b5fdfe70a52850884b31d7000143fc5a5a83dd84a5475 esc-1.1.0-24.el6_2.2.x86_64.rpm Source: d9fe8c5ca66465ab287f8bb3b1a24a811ce401f06f7f67a369df99da63a2f1f4 esc-1.1.0-24.el6_2.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 11 Date: Wed, 11 Apr 2012 14:15:24 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0470 CentOS 6 squid Update To: centos-announce(a)centos.org Message-ID: <20120411141524.GA8387(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0470 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0470.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 19aa58cd8afd0ce30885600950f21c8bc8ac92d344a4972b0d52b17a081f230d squid-3.1.10-1.el6_2.3.i686.rpm x86_64: 59cb2163e205eefbbdbc60f6b58c22669075744856a7328fb8d64d67b5526938 squid-3.1.10-1.el6_2.3.x86_64.rpm Source: e65756fe80e783a723738888ad2809f22ea51fc88db15e2af3d1c3e9fb09390f squid-3.1.10-1.el6_2.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 86, Issue 6 **********************************************

1 0

gnumeric/goffice: defective RPM from rpmforge ???
by ken 11 Apr '12

11 Apr '12

"yum update" output: ............................... --> Running transaction check --> Processing Dependency: libgoffice-1.so.2 for package: gnumeric ---> Package goffice.i386 0:0.6.6-1.el5.rf set to be updated --> Finished Dependency Resolution 1:gnumeric-1.6.3-15.el5.2.i386 from installed has depsolving problems --> Missing Dependency: libgoffice-1.so.2 is needed by package 1:gnumeric-1.6.3-15.el5.2.i386 (installed) Error: Missing Dependency: libgoffice-1.so.2 is needed by package 1:gnumeric-1.6.3-15.el5.2.i386 (installed) ............................... # rpm -qa| grep goffice goffice-0.2.2-1.el5 # yum deplist gnumeric|grep goffice dependency: libgoffice-1.so.2 provider: goffice.i386 0.2.2-1.el5

3 3

shellinabox
by Piero 10 Apr '12

10 Apr '12

Hi, is there anyone using shellinabox[1] (Web based AJAX terminal emulator): I'm trying to run it on a Centos 6.2 x86_64 but I cannot past inserting username and I get "session closed". Actually I'm using SELINUX in Enforcing mode but nothing strange is logged in /var/log/audit/audit.log. Actually nothing strange is logged anywhere but I still get only "session closed" after inserting username and pressing enter key. I'm trying to escape a very strong firewall/proxy for the purpose of managing such a Centos box via SSH and, if you know alternatives to shellinabox, I'll be very glad to hear something from you. I already tried corkscrew and tor but both cannot escape firewall/proxy rules. Thanks in advance for your help, Bye Piero [1]http://code.google.com/p/shellinabox/ -- Stupid is as stupid does. Forrest Gump

8 10

Removing LVM
by James Pifer 10 Apr '12

10 Apr '12

I have a CentOS 5 machine in which I'm trying to remove lvm. I dd'ed the file system to another partition, then dd'ed it back overwriting the lvm partition. I then modified menu.lst and fstab and replaced the paths to point to the correct device. When the system boots it's still looking for lvm. I can restore the system back to where it was with lvm, but I'm not sure what step I'm missing to stop the system from looking for lvm. I started following this url: http://daniel-albuschat.blogspot.com/2008/02/converting-lvm-to-normal-parti… Any suggestions? Thanks, James

3 3

6.2 How to change hostname for each individual IP
by Jonathan Vomacka 10 Apr '12

10 Apr '12

Good day, I was wondering if there was a way to change the hostname for each individual IP address allocated to a system. For example if only one NIC card is being used (single port) and the hostname of the machine is "example.example.org", this hostname is being displayed for all applications no matter what IP I set the application to BIND to. My server has multiple IP addresses setup as an ALIAS and ive tried setting up ptr's, A records, and even specifying the new hostname in /etc/hosts. No matter what I do when I connect to the application it read "example.example.org" which is the hostname of the machine rather then the hostname I want it to read on a particular IP. Is this possible to change?

7 9

yum priorities and obsoleting...
by John Doe 10 Apr '12

10 Apr '12

Hey, I ran into a yum conflict regarding an repoforge extra package obsoleting a base package. The thing is that I set a lower priority to repoforge extra... Any idea how come I ran into this issue...? The question is more about the yum priorities than repoforge. ... 1743 packages excluded due to repository priority protections ... --> Running transaction check ---> Package perl-rrdtool.x86_64 0:1.4.5-1.el6.rfx will be obsoleting --> Processing Dependency: rrdtool = 1.4.5 for package: perl-rrdtool-1.4.5-1.el6.rfx.x86_64 ---> Package rrdtool-perl.x86_64 0:1.3.8-6.el6 will be obsoleted --> Finished Dependency Resolution Error: Package: perl-rrdtool-1.4.5-1.el6.rfx.x86_64 (rpmforge-extras) Requires: rrdtool = 1.4.5 Installed: rrdtool-1.3.8-6.el6.x86_64 (@base) rrdtool = 1.3.8-6.el6 lua-rrdtool.x86_64 1.4.7-1.el6.rfx rpmforge-extras perl-rrdtool.x86_64 1.4.5-1.el6.rfx rpmforge-extras python-rrdtool.x86_64 1.4.5-1.el6.rfx rpmforge-extras rrdtool-devel.i686 1.3.8-6.el6 base rrdtool-devel.x86_64 1.3.8-6.el6 base rrdtool-doc.x86_64 1.3.8-6.el6 base rrdtool.i686 1.3.8-6.el6 base rrdtool-perl.x86_64 1.3.8-6.el6 @base rrdtool-php.x86_64 1.3.8-6.el6 base rrdtool-python.x86_64 1.3.8-6.el6 base rrdtool-ruby.x86_64 1.3.8-6.el6 base rrdtool-tcl.x86_64 1.3.8-6.el6 base rrdtool.x86_64 1.3.8-6.el6 @base ruby-rrdtool.x86_64 1.4.5-1.el6.rfx rpmforge-extras tcl-rrdtool.x86_64 1.4.5-1.el6.rfx rpmforge-extras Thx, JD

2 2

totem-nautilus and totem - mp3 duration
by Frank Cox 10 Apr '12

10 Apr '12

I have both totem-nautilus and the assorted gstreamer-plugins installed for playing mp3 files through Totem. I note that Totem doesn't appear to know the duration of an mp3. For example, if I right-click on a wav or ogg file and click on the audio tab, one of the fields is Duration and it tells me how long that file will play. If I do the same with a mp3 file the duration field is always 0 seconds. When I play a mp3 file with Totem the progress bar across the bottom doesn't move and the elapsed time display at the bottom says "Streaming" while counting up the seconds. Have I missed something when setting up Totem to play mp3's? -- MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com www.creekfm.com - FIFTY THOUSAND WATTS of POW WOW POWER!

2 1

Problem with NFS4 and CentOs 5.8
by Veli-Pekka Kestilä 10 Apr '12

10 Apr '12

Hi, I hope someone could give me help with following problem on centos 5.8 kernel and nfs4. On server i have bind mounted directory shared to the client with following setup: mounted directory: /srv/nfs/imagetest on /exports/imagetest type none (rw,bind) /etc/exports file: /exports 10.0.4.0/24(ro,insecure,sync,wdelay,no_subtree_check,no_root_squash,fsid=0,crossmnt) /exports/imagetest 10.0.4.20(rw,insecure,sync,wdelay,no_subtree_check,nohide,no_root_squash) On client I have mounted it with following command: 10.0.4.2:/ on /media/nfs type nfs4 (rw,nodev,sync,proto=tcp,retry=10,rsize=32768,wsize=32768,hard,intr,addr=10.0.4.2) This works fine with kernel: 2.6.18-274.17.1.el5.centos.plusxen But with 2.6.18-308.1.1.el5.centos.plusxen I get the following error: -bash: cd: imagetest/: Not a directory when accessing the share. If I disable nohide-option I can access the directory, but with the contents of the original /exports/imagetest without the mounting. Greetings, -vpk

2 2

Need to split long lines in mail archives
by James B. Byrne 10 Apr '12

10 Apr '12

CentOS-6.2 I am investigating how to split long lines present in a Mailman generated html archives. Mailman places the email bodies within <pre></pre> tags and some users have MUAs that send entire paragraphs as one long line. I have looked at fmt and fold but these assume a pipeline from stdout to a fixed filename, which presumably is best done at the time of the original file's creation. I am looking for a way to deal with multiple existing files in a batch fashion so that the reformatted file is written back out to the same file name oin the same location. I cannot seem to hit upon a way to get this to work using find, xargs and fmt (or fold). Nor can I seem to find an example of how this might be done using these utilities. What I would like to discover is the functional equivalent of this: find /path/to/archives/*.html -print | xargs -I {} fmt -s {} > {} This syntax does not work of course because the xargs file name substitution only occurs once in the initial argument list of the following command. But, this example does describe the effect I wish to obtain, to have the original file name receive the reformatted contents. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

7 6

gnumeric/goffice: defective RPM from rpmforge ???
by ken 09 Apr '12

09 Apr '12

"yum update" output: ............................... --> Running transaction check --> Processing Dependency: libgoffice-1.so.2 for package: gnumeric ---> Package goffice.i386 0:0.6.6-1.el5.rf set to be updated --> Finished Dependency Resolution 1:gnumeric-1.6.3-15.el5.2.i386 from installed has depsolving problems --> Missing Dependency: libgoffice-1.so.2 is needed by package 1:gnumeric-1.6.3-15.el5.2.i386 (installed) Error: Missing Dependency: libgoffice-1.so.2 is needed by package 1:gnumeric-1.6.3-15.el5.2.i386 (installed) ............................... # rpm -qa| grep goffice goffice-0.2.2-1.el5 # yum deplist gnumeric|grep goffice dependency: libgoffice-1.so.2 provider: goffice.i386 0.2.2-1.el5

3 2

vpostmaster and Centos 6
by Tom Bishop 09 Apr '12

09 Apr '12

Read through several vpostmaster email threads via the centos mail list, I am about to go down the vpostmaster bunny hole. I need a spam filter for a very small site, my church, 20 or so mailboxes and just need something easy to setup and maintain. One of my inital thoughts when I was creating the centos 6 VM was what sort of disk space is required, nothing in the docs called anything out, they talked about memory which is not an issue for me and I gave 2Gb for the memory and threw a small disk out of it. Is anyone running it with Centos 6, it appears from the mailing list that it should work with centos 6 but wanted to see if anyone was using it. Also, if anyone has any tips/guides/tweaks that they can recommend/share that would be great, Thanks in advance.

4 8

CentOS-announce Digest, Vol 86, Issue 5
by centos-announce-request＠centos.org 09 Apr '12

09 Apr '12

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2012:0464 CentOS 6 libarchive Update (Johnny Hughes) 2. CEBA-2012:0462 CentOS 6 libtar FASTTRACK Update (Johnny Hughes) 3. CEBA-2012:0463 CentOS 6 man-pages-fr FASTTRACK Update (Johnny Hughes) 4. CEBA-2012:0461 CentOS 6 procps FASTTRACK Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 9 Apr 2012 14:27:19 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0464 CentOS 6 libarchive Update To: centos-announce(a)centos.org Message-ID: <20120409142719.GA27812(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0464 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0464.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 6152df40ff711020181d45d56638ccb6ddbae9dfcbb36ea75d8094a0af624608 libarchive-2.8.3-4.el6_2.i686.rpm f0156d1a8fe061367dacf149152106e3fa2f2fcbe0f1ea7801c3e20290583b0f libarchive-devel-2.8.3-4.el6_2.i686.rpm x86_64: 6152df40ff711020181d45d56638ccb6ddbae9dfcbb36ea75d8094a0af624608 libarchive-2.8.3-4.el6_2.i686.rpm 7525305b518458f8704f7e5a47daaa8e622a5db205aca094d02626b018ca73ef libarchive-2.8.3-4.el6_2.x86_64.rpm f0156d1a8fe061367dacf149152106e3fa2f2fcbe0f1ea7801c3e20290583b0f libarchive-devel-2.8.3-4.el6_2.i686.rpm ece6a400b2955eeebf0f8511771d30708b1fc1b880a5d82e06fd1c4776da0224 libarchive-devel-2.8.3-4.el6_2.x86_64.rpm Source: 4e3f1c8a7a995b9bab446e377a58733398a763314599b5e0336844b3ecafecb6 libarchive-2.8.3-4.el6_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 9 Apr 2012 14:30:34 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0462 CentOS 6 libtar FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20120409143034.GA29210(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0462 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0462.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: d15f7ea84184b8f8d786c5660cae58d2711852061765f51403a75fa0dda2f683 libtar-1.2.11-17.el6.i686.rpm fe8a82d726cf0a4033e1a55ef3d02c75e057ee8ec31f671f28ea9483e0137f15 libtar-devel-1.2.11-17.el6.i686.rpm x86_64: d15f7ea84184b8f8d786c5660cae58d2711852061765f51403a75fa0dda2f683 libtar-1.2.11-17.el6.i686.rpm 93476ad801507b58efbb9fab06fe6f26dbf6773161be610a1545dfc0d57068ea libtar-1.2.11-17.el6.x86_64.rpm fe8a82d726cf0a4033e1a55ef3d02c75e057ee8ec31f671f28ea9483e0137f15 libtar-devel-1.2.11-17.el6.i686.rpm 853e17db3801950d5eea2da7422d213f287c26eb66d51763de3f89b92239ead1 libtar-devel-1.2.11-17.el6.x86_64.rpm Source: ce92c5bfbd8e86e7934ddaac66c359c24535c36a63a8a5cbd707f18f9d96fa38 libtar-1.2.11-17.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Mon, 9 Apr 2012 14:30:58 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0463 CentOS 6 man-pages-fr FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20120409143058.GA29286(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0463 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0463.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 25f2d12ed0b60a6d3d5ce4df166728dab8088287b480e5528584b68639c654ed man-pages-fr-3.23-9.el6.noarch.rpm x86_64: 25f2d12ed0b60a6d3d5ce4df166728dab8088287b480e5528584b68639c654ed man-pages-fr-3.23-9.el6.noarch.rpm Source: f84538b180bf06735a10f8a015c74c085ba32f227b2f2e8a00caa173c2274c1f man-pages-fr-3.23-9.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Mon, 9 Apr 2012 14:31:26 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0461 CentOS 6 procps FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20120409143126.GA29368(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0461 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0461.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 7ca62162ed3e0fbe3d4a3d6f88db2b01e65ab436e316cf4ae6b9b4c540265726 procps-3.2.8-23.el6.i686.rpm 4fc71f6dcb059f86bc4c5480b4f20082d30776d7f13e34eda8e65efddcee83f1 procps-devel-3.2.8-23.el6.i686.rpm x86_64: 38c10d523a68dd69a358e4c923a0216de7fef7af9e5688466468f8220099b059 procps-3.2.8-23.el6.x86_64.rpm bfe14f92a867c568821cfaf7050e45267fbeeed87effbc5947028199cfd03c81 procps-devel-3.2.8-23.el6.x86_64.rpm Source: 4d12669ec3cb7855e35a939bf06423e4f0f672a1909c02189f1e4d18ebefa6f2 procps-3.2.8-23.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 86, Issue 5 **********************************************

1 0

Monitor disc write in preparation for move to Solid State Disc
by Brian Jameson 09 Apr '12

09 Apr '12

I am planning on changing/upgrading one of my systems to Centos 6.x with a solid state system drive and conventional 'data' drives. Any suggestions for a good simple tool, or way to give ongoing monitoring of writes to files on what will become the system drive. The I can then move as much as possible of the changeable files to the data drives. Suggestions much appreciated. regards Brian

2 1

Apparent Bug In Gnome Games
by Mark LaPierre 08 Apr '12

08 Apr '12

Hey Y'all Can someone suggest the appropriate place to report a bug in a Gnome game? -- _ °v° /(_)\ ^ ^ Mark LaPierre Registerd Linux user No #267004 www.counter.li.org ****

3 2

Newbie here
by root 08 Apr '12

08 Apr '12

Hello there newbie here, Finally managed to install 5.1 and hope to get started with RHCT textbook. Has anyone gone the self study route ?, any tips/hints to light the way most appreciated. Thanks for reading Kind regards Paul

2 1

- tigervnc-server with kde
by Paolo De Michele 07 Apr '12

07 Apr '12

Hi all I have a problem in the configuration of tigervnc-server-use centos 6.1 and tigervnc-server version is that which lies in the repo I followed the following steps: - tigervnc-installed - added the user in the section /etc/sysconfig/vncservers - set a password using the vncpasswd - left by default the xstartup file created - restart vncserver service When I connect remotely to my host everything works just that regularly see a gnome desktop instead of one kde (like I would) I tried to change several times the xstartup to no avail. can someone tell me exactly which strings should I put to view my desktop with kde? Thanks in advance

1 0

kernel LANG option
by m.roth＠5-cent.us 06 Apr '12

06 Apr '12

One thing that irritates me is that I'll copy something from a site in ff and paste it into webmail (squirrel/ensign, if that matters); then, in the evening, when I want to forward it to one or more of my lists, using t-bird, I have to clean it up *all* the time: 2-3 characters replacing ",' and -. I can't seem to find anything in either the webmail options (which I have set to plain text), or kde (thinking of the buffer it's held in), to affect this. I'm googling, but haven't seen what the effect of changing the kernel line in /boot/grub/grub.conf from en_US.UTF-8 to, say, en_US, or maybe even, if that's an option, ASCII.... Anyone know? mark, almost ready to install and play with a friend from a techie mailing list's email tool, running on top of mutt....

2 2

IPSEC How To?
by Helmut Drodofsky 06 Apr '12

06 Apr '12

Hello, now I have spent many hours to configure openswan for VPN connections without any success. My goal: VPN Server CentOS 6 with public IPv4 VPN Client (= road warrier) from private site with NAT router or from mobile cell with Linux, Windows 7, Mac, iPhone or Android Is there any how to in the net? When I read file:///usr/share/doc/openswan-doc-2.6.32/config.html then I belive, there is no solution. It is written, that I have to reconfigure the NAT router of the mobile provider or the hardware NAT router of the private dsl uplink. Both is impossible. Thank you for help in advance. Helmut Helmut Drodofsky Internet XS Service GmbH Heßbrühlstraße 15 70565 Stuttgart Geschäftsführung Dr.-Ing. Roswitha Hahn-Drodofsky HRB 21091 Stuttgart USt.ID: DE190582774 Tel. 0711 781941 0 Fax: 0711 781941 79 Mail: info(a)internet-xs.de www.internet-xs.de

4 6

rsyslog / rotation, best practices
by Bob Hoffman 05 Apr '12

05 Apr '12

centos6 in regards to /etc/logrotate.d/syslog the file is in charge of processing /var/log/cron /var/log/maillog /var/log/messages /var/log/secure /var/log/spooler If I wanted to make a specific setting just for maillog (since that file gets huge really quick) would I add 1- a new file /etc/logrotate.d/maillog with the parameters just like the other files 2- add parameters in the file it is already located in (/etc/log...d/syslog) 3- logrotate.conf where other settings for btmp and wtmp are located. Which is the 'best practice' or preferred solution to changing the defaults for the files in the logrotate.d/syslog file. Right now I have changed logrotate.conf to go off daily to keep the maillog from getting to huge. I do not know what the default is for size forcing the change, but when it got to 35MB logwatch was not properly accessing it and logrotate in debug mode was saying file too big must be config file. There seems to be no setting for file size to force rotation for the log files in the logrotate.d/syslog file. thanks bob

1 0

CentOS-announce Digest, Vol 86, Issue 4
by centos-announce-request＠centos.org 05 Apr '12

05 Apr '12

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2012:0452 CentOS 6 db4 FASTTRACK Update (Johnny Hughes) 2. CEBA-2012:0456 CentOS 6 expect FASTTRACK Update (Johnny Hughes) 3. CEBA-2012:0455 CentOS 6 libuser FASTTRACK Update (Johnny Hughes) 4. CEBA-2012:0454 CentOS 6 vim FASTTRACK Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 5 Apr 2012 01:04:52 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0452 CentOS 6 db4 FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20120405010452.GA24603(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0452 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0452.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 0a466556f5dd693a22fe8b60a17f36ee520a86709a2bb8f9890892a744b5f744 db4-4.7.25-17.el6.i686.rpm f3ea647e99d9c6025aa9d52c0ea5a8fe6c87882983f96da7962ddae77f7fcd39 db4-cxx-4.7.25-17.el6.i686.rpm 1955922d352baef7a5762ff5120f19848156d8326435e0558b724aba665e8635 db4-devel-4.7.25-17.el6.i686.rpm 492f272e50760b050e493689b6f646322985a29afa090ff678ba557f1936ab4a db4-devel-static-4.7.25-17.el6.i686.rpm ddfff0ab683e1a8404c51187728eb2a8216b1e00f8a3874091976780df778387 db4-java-4.7.25-17.el6.i686.rpm 8a0a58dcbdf25de16c3f02a0c0344de1483543b64e9201bef0aca3aa0f6a392b db4-tcl-4.7.25-17.el6.i686.rpm cb92d90ac31fe066b5f7727244711c5312601b2c8bbb7eb813d88a9cf1bb9de9 db4-utils-4.7.25-17.el6.i686.rpm x86_64: 0a466556f5dd693a22fe8b60a17f36ee520a86709a2bb8f9890892a744b5f744 db4-4.7.25-17.el6.i686.rpm 1af69a9921742f41f57d09f03d2076174e28f9020b32fa6a18dc662fc7c77f2e db4-4.7.25-17.el6.x86_64.rpm f3ea647e99d9c6025aa9d52c0ea5a8fe6c87882983f96da7962ddae77f7fcd39 db4-cxx-4.7.25-17.el6.i686.rpm bade71631c61e4bc9ffe1f8c30060a3cbc4fcd1c453365fd223220d5d4c20868 db4-cxx-4.7.25-17.el6.x86_64.rpm 1955922d352baef7a5762ff5120f19848156d8326435e0558b724aba665e8635 db4-devel-4.7.25-17.el6.i686.rpm f6b7ae526caa8b0b771205d5ab6094accbc4cd32318a2a56330f83f2de5f0cb8 db4-devel-4.7.25-17.el6.x86_64.rpm 6651c2c68167b81b2848173c0a8fa13636a2e2e2fda085304e2d7d426816ae16 db4-devel-static-4.7.25-17.el6.x86_64.rpm 284f11258cc2a4ed52ea0eeb4fbbf914fdc06316d9e744545aaaafe7af2bf4cb db4-java-4.7.25-17.el6.x86_64.rpm 471ce4382d34803462cc69a930d3bb0c8e06c35faaa5ae36b2796bd1ee96667e db4-tcl-4.7.25-17.el6.x86_64.rpm 1eb0fc38dfbfb019fecc3ab35e3f1e2e4fe38e4eb6a107a3e643bdefbbeb2cea db4-utils-4.7.25-17.el6.x86_64.rpm Source: 4d7e1cfb9d369a22052f4f1d519b28a2ce6c54eee67ce243a530b038f4b4b887 db4-4.7.25-17.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Thu, 5 Apr 2012 09:30:55 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0456 CentOS 6 expect FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20120405093055.GA17173(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0456 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0456.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 5586d8820e0bd92006b7106dbd0a84f68b0c740fb38a7ddab43c0fb82baf26a7 expect-5.44.1.15-4.el6.i686.rpm 4eff6af69f61bd24f891df0a4dd3e66feb8792bcfd0f39dd40f17ad3251af1eb expect-devel-5.44.1.15-4.el6.i686.rpm c3739d8f9a0ad6b29c001f2d7b6951e127834c634d29302d17500b5fdb3f84d0 expectk-5.44.1.15-4.el6.i686.rpm x86_64: a5b16ad36a6b3799bf1213155f6b74ddf97e2b12be3f4def9cd05cbd7f981535 expect-5.44.1.15-4.el6.x86_64.rpm 4eff6af69f61bd24f891df0a4dd3e66feb8792bcfd0f39dd40f17ad3251af1eb expect-devel-5.44.1.15-4.el6.i686.rpm a70e07f15107d548a3dcdcafcc8b73db5416b2603bf70c0f286b2663a3cb8d2c expect-devel-5.44.1.15-4.el6.x86_64.rpm 5bb6394a3bede9afedfb05665434d618d0e2fd9b378a6da8013ccb4410c4640f expectk-5.44.1.15-4.el6.x86_64.rpm Source: cae59720bc704b2e7ae1bbfb74b18badb58f675865d9e5fd38b9e3b2b457e240 expect-5.44.1.15-4.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Thu, 5 Apr 2012 09:31:12 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0455 CentOS 6 libuser FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20120405093112.GA17262(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0455 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0455.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ceb43462a9184541e1685f69d88050092564e56860e84b827a090dec8ed767fb libuser-0.56.13-5.el6.i686.rpm b2a788c47476f2fb214e36480ecfde35b86ae5e38b379fdd3d19048190bb3f85 libuser-devel-0.56.13-5.el6.i686.rpm e7a39e212a88b05ea1ec7be55d5c2eddd7cafd8f9289238ae603b795a410889e libuser-python-0.56.13-5.el6.i686.rpm x86_64: ceb43462a9184541e1685f69d88050092564e56860e84b827a090dec8ed767fb libuser-0.56.13-5.el6.i686.rpm 02eae00eeaa462fc48b256363a907e7af573d49a89c1b5d283de7466caf5ad2e libuser-0.56.13-5.el6.x86_64.rpm b2a788c47476f2fb214e36480ecfde35b86ae5e38b379fdd3d19048190bb3f85 libuser-devel-0.56.13-5.el6.i686.rpm 3f1df58a83b521ed7d17c7d5e89b93d6e7490141af4364d183156f1ddbfc9dc2 libuser-devel-0.56.13-5.el6.x86_64.rpm 738895ecf2333a7da1bb4918aa2a2c76b5ae368607a680817315204abb1bf8a5 libuser-python-0.56.13-5.el6.x86_64.rpm Source: 53124a0d7d2a68a1fe6f0f866aed981b04d926b19af538c6b5781a0774df7a8d libuser-0.56.13-5.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Thu, 5 Apr 2012 09:31:26 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0454 CentOS 6 vim FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20120405093126.GA17350(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0454 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0454.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: f5fb381c68dac283a214458c704c4bce8eba4a6c636f9d1b7672f54912e18bc9 vim-common-7.2.411-1.8.el6.i686.rpm 61855df8d9f959a330aaef27cb68e2b01a01191025df71a899e945f041b0a53f vim-enhanced-7.2.411-1.8.el6.i686.rpm c0abf94bfbdb56bacf272b31b9745949e8c35343278752b8f81849176b515285 vim-minimal-7.2.411-1.8.el6.i686.rpm cfd893d5edd1367f4a5ce3779b960a33f4e9791ee579e574c3e4391d13f1c5b3 vim-X11-7.2.411-1.8.el6.i686.rpm x86_64: 73c61d9f458d3ea2081fce72fbed8de89727c1a84c959e121ac948018096da88 vim-common-7.2.411-1.8.el6.x86_64.rpm 36a522df046529d9d89b9db7b209e8022ebbe2b5cad93db2fb6abe2e41b959cd vim-enhanced-7.2.411-1.8.el6.x86_64.rpm 3947daf8bfbb73828aae038dad4c8fd058acdf9c3dedf1c4e3ab77679b765b27 vim-minimal-7.2.411-1.8.el6.x86_64.rpm 88995047803fc1c494071de4c6fcce111cce7c70417f526c7e3e833a4b3a194d vim-X11-7.2.411-1.8.el6.x86_64.rpm Source: 8c9329d176739e60e6e3886baef84bab687fb467de73e24c34e0df3c88c69dce vim-7.2.411-1.8.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 86, Issue 4 **********************************************

1 0

Next kernel?
by m.roth＠5-cent.us 05 Apr '12

05 Apr '12

First, let me say that I don't know if you're getting paid for the work you do for CentOS, but the speed that you put out updates - they're out around or before I get the email from RH - is very much appreciated, and if we're ever at the same place, I'd like to buy you a drink. Now, a week or two ago, someone was posting here, having problems with NFS hanging under a heavy load, and IIRC, mentioned successfully testing with a newer RHEL kernel - was it 2.6.32-250 or so? - and I was wondering how soon that was in the pipeline, because I'd like to play with it. We don't have it hanging with the current and last couple 6.2 kernels, but reading from and writing to an NFS-mounted directory is six times slower than reading from that directory, and writing to the local disk; for that reason, we've stopped pushing the migration from 5.x to 6.2 on our home directory servers, and rolled several back to 5.x mark

2 1

6.2 - How to check for a failed disk using LVM with a hardware RAID (3ware)
by Jonathan Vomacka 05 Apr '12

05 Apr '12

CentOS Community, What commands can I use to check the disk health of the system when LVM2 is being used on top of a RAID 10 using a HARDWARE 3ware raid card. The OS sees a hardware raid usually as one big drive. Is there a way to check the disks individually to see if any are failing, or throwing hard or scsi transport errors?

5 4

Block outgoing connections for certaing uids (root, apache, nobody)
by Alexander Farber 05 Apr '12

05 Apr '12

Good morning With iptables in CentOS 5 and 6 Linux - how can you please prevent processes running as "root", "apache" or "nobody" from initiating outgoing connections? On CentOS 5 Linux I've tried putting these lines into /etc/sysconfig/iptables: -A OUTPUT -m owner --uid-owner root -j DROP -A OUTPUT -m owner --uid-owner apache -j DROP -A OUTPUT -m owner --uid-owner nobody -j DROP but unfortunately get the error: # sudo service iptables restart iptables: Flushing firewall rules: [ OK ] iptables: Setting chains to policy ACCEPT: filter [ OK ] iptables: Unloading modules: [ OK ] iptables: Applying firewall rules: iptables-restore v1.4.7: owner: Bad value for "--uid-owner" option: "apache" Error occurred at line: 27 Try `iptables-restore -h' or 'iptables-restore --help' for more information. [FAILED] Thank you Alex

5 5

32/64-bit Library Sharing and Placement
by Brian McGrew 05 Apr '12

05 Apr '12

Good evening... I'm rebuilding much of the gnu toolchain for some development testing I'm working. GMP, MPC, MPFR, PPL, as well as many others. I need to be able to have both 32 and 64 bit versions of these libraries avilable on the system, in more or less the same path (/toolchain/lib, /toolchain/lib64). Generically speaking, is there an easy way to build both 32 and 64 bit versions a the same time??? Or, more specifically, what is the best way to get both versions built??? CentOS 6.2 on a Dell 1900 with Xeon 5130 CPU's. -b

2 2

dns cache rbl lists?
by Bob Hoffman 05 Apr '12

05 Apr '12

No idea where else to ask this and get a real qualified answer but here. Not exactly pure centos question....but... I am adding blacklists to my postfix smtpd settings. I have the inkling that after the first lookup for a domain or ip that my dns caches the result and I no longer bother the RBL or RHSBL list owners anymore in that instance. Is that correct? I hate to waste their resources if it is not. thanks, bob

2 2

3.2 kernel with C5? Or ndiswrapper?
by Stephen Harris 04 Apr '12

04 Apr '12

I know, I know... don't use the non-standard kernels unless you have to... BUT: I have a D-Link N150 USB card. Bus 001 Device 004: ID 0846:9030 NetGear, Inc. WNA1100 Wireless-N 150 [Atheros AR9271] This isn't supported in C5, but it is supported in newer kernels (ath9k_htc). So let's try NDISwrapper: # rpm -i kmod\-ndiswrapper\-1.56\-1.el5.elrepo.i686.rpm ndiswrapper\-utils\-1.56\-1.el5.elrepo.i386.rpm warning: kmod-ndiswrapper-1.56-1.el5.elrepo.i686.rpm: Header V3 DSA signature: NOKEY, key ID baadae52 Working. This may take some time ... Done. # cd WLAN/ # ls athuw.sys* netathuw.cat* netathuw.inf* # ndiswrapper -i netathuw.inf installing netathuw ... forcing parameter MapRegisters from 256 to 64 forcing parameter MapRegisters from 256 to 64 [repeated multiple times] # ndiswrapper -l netathuw : driver installed device (0846:9030) present # modprobe ndiswrapper # dmesg | tail -5 ndiswrapper: driver netathuw (,09/30/2010,7.7.0.98) loaded wlan0: ethernet device c4:3d:c7:bc:ea:89 using NDIS driver: netathuw, version: 0x70007, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9030.F.conf wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK usbcore: registered new driver ndiswrapper ADDRCONF(NETDEV_UP): wlan0: link is not ready # ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr C4:3D:C7:BC:EA:89 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) # /sbin/iwlist wlan0 scan | grep ESSID.*sweh ESSID:"sweh" So far, so good! BUT... # iwconfig wlan0 nickname fred # iwconfig wlan0 essid sweh # iwconfig wlan0 wlan0 IEEE 802.11g ESSID:off/any Nickname:"fred" Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Bit Rate=150 Mb/s Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Hmm, ESSID isn't being set. If I try to configure wpa_supplicant then it never associates properly. So I'm not totally convinced ndiswrapper is working for me. So I figured... dammit; let's try a generic kernel. Not good, but... I compile 3.2.9, install the modules and then try an boot... and it fails to find my root disk and panics. I can see from the boot messages that the kernel is seeing them, but it's failing to mount and switchroot. (of course I can't get useful information 'cos you can't do anything useful after a panic!) Looking at the initrd, it seems to have all the right drivers and modules, and the init script _looks_ correct... but it's just not working. Has anyone else tried to get 3.2.9 to work with C5.8? Or has anyone any advice for getting ndiswrapper to work for me (or other ways of running the N150 card)? Thanks! -- rgds Stephen

5 14

virtio or IDE on SBS 2011 (or any domain controller)
by Jacob Hydeman 04 Apr '12

04 Apr '12

CentOS 6.2, using latest KVM drivers for Windows guests. Using LVM for storage, software raid 10, RAW with write cache disabled in the virt manager. When using virtio drivers for disk drives Windows Server complains about write caching being enabled. I can't disable it either. Using IDE prevents this from being happening, however the performance sucks. All searches related to fixing the write cache issue results in it being a controller setting, bios setting or manufacturer flaw. Since this is all software raid, LVM and Red Hat's virtio drivers it doesn't apply (or at least is fixable by others methods). My concern is data integrity over performance, but I'd like to know what others are doing. My fallback plan is to use IDE for the OS and virtio for the Data drive, moving Exchange and the folder redirects to the data drive (or even a different server install attached to the domain), but I'd appreciate others experiences before I resign to dealing with this limitation. Thanks, Jacob

1 0

question on DHCP
by Jerry Geis 04 Apr '12

04 Apr '12

If a machine with centos 6.2 is set for DHCP and it looses power and the switch looses power for a long time. lets say a day. so the switch really goes off even with batter backup. Now power comes on, the machine asks for a DHCP address before the switch is read as its not back up yet. there is no response and the machine does not get an address. Finally the switch comes back up , the machine has already posted that it Network got an error as there was no DHCP server. Does the machine ever ask again???? or do I have to manually do a server network restart or reboot the machine again. It seems to never ask again. jerry

3 2

Centos 5.6 Kernel Panics
by Jonathan Alstead 04 Apr '12

04 Apr '12

Hello, Recently our dell sc1425 server has been locking up with kernel freezes and required a hard reboot on each occasion. I've looked on the centos forums with limited success - each problem seems slightly different (some failure on high load, some not). Our kernel is 2.6.18-274.17.1.el5 and /var/log/messages show the following errors: Apr 3 12:41:25 sp2 kernel: INFO: task mysqld:15345 blocked for more than 120 seconds. Apr 3 12:41:25 sp2 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Apr 3 12:41:25 sp2 kernel: mysqld D 00000CEB 2524 15345 32083 15346 15167 (NOTLB) Apr 3 12:41:25 sp2 kernel: c50c7f54 00000082 bf379c08 00000ceb ca9b1648 f43c6c5c 00000000 00000001 Apr 3 12:41:25 sp2 kernel: d9d18000 bf384f01 00000ceb 0000b2f9 00000001 d9d1810c c2013ac4 edc5de40 Apr 3 12:41:25 sp2 kernel: 08515c98 c6cb37b8 c2014464 c200cc80 00000020 00000000 00000000 00000000 Apr 3 12:41:25 sp2 kernel: Call Trace: Apr 3 12:41:25 sp2 kernel: [<c0622f16>] rwsem_down_write_failed+0x126/0x141 Apr 3 12:41:25 sp2 kernel: [<c0439989>] .text.lock.rwsem+0x2b/0x3a Apr 3 12:41:25 sp2 kernel: [<c046aa6a>] sys_mprotect+0xbd/0x1eb Apr 3 12:41:25 sp2 kernel: [<c0404f4b>] syscall_call+0x7/0xb Apr 3 12:41:25 sp2 kernel: ======================= Apr 3 12:41:25 sp2 kernel: INFO: task clamd:15721 blocked for more than 120 seconds. Apr 3 12:41:26 sp2 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Apr 3 12:41:26 sp2 kernel: clamd D 00000D49 2528 15721 1 16416 15449 (NOTLB) Apr 3 12:41:26 sp2 kernel: e848cf74 00000086 8f107b57 00000d49 30ea2005 e848cf44 c08259d0 00000007 Apr 3 12:41:26 sp2 kernel: e8c6aaa0 8f117848 00000d49 0000fcf1 00000000 e8c6abac c200cc80 f4f5f3c0 Apr 3 12:41:26 sp2 kernel: c041f863 00000184 c200d620 c2013ac4 00000020 00000000 d887f0a8 f766f0c0 Apr 3 12:41:26 sp2 kernel: Call Trace: Apr 3 12:41:26 sp2 kernel: [<c041f863>] default_wake_function+0x0/0xc Apr 3 12:41:26 sp2 kernel: [<c048e994>] destroy_inode+0x38/0x47 Apr 3 12:41:26 sp2 kernel: [<c0622f16>] rwsem_down_write_failed+0x126/0x141 Apr 3 12:41:26 sp2 kernel: [<c0439989>] .text.lock.rwsem+0x2b/0x3a Apr 3 12:41:26 sp2 kernel: [<c046a32b>] sys_munmap+0x24/0x41 Apr 3 12:41:26 sp2 kernel: [<c0404f4b>] syscall_call+0x7/0xb Any advice would be appreciated. regards, Jon

4 4

Centos6 iptables startup vs. restart?
by Les Mikesell 04 Apr '12

04 Apr '12

What is different about the initial startup of iptables than 'service iptables restart' (and different from C5)? I want to use iptables port redirection to send port 80 to 8080 so a java web service doesn't have to start as root. On C5 it worked to give the iptables commmands, then 'iptables save', and from then on it would automatically work when iptables started after a reboot. With C6, I have the expected entries in /etc/sysconfig/iptables and they are loaded after 'service iptables restart', but the initial startup is doing something else. -- Les Mikesell lesmikesell(a)gmail.com

4 6

CentOS-announce Digest, Vol 86, Issue 3
by centos-announce-request＠centos.org 04 Apr '12

04 Apr '12

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2012:0444 CentOS 6 cpio FASTTRACK Update (Johnny Hughes) 2. CEBA-2012:0448 CentOS 6 system-config-printer FASTTRACK Update (Johnny Hughes) 3. CEBA-2012:0443 CentOS 6 make FASTTRACK Update (Johnny Hughes) 4. CEBA-2012:0449 CentOS 6 man FASTTRACK Update (Johnny Hughes) 5. CEBA-2012:0450 CentOS 6 kdeartwork FASTTRACK Update (Johnny Hughes) 6. CEBA-2012:0447 CentOS 6 portreserve FASTTRACK Update (Johnny Hughes) 7. CEBA-2012:0446 CentOS 6 SDL FASTTRACK Update (Johnny Hughes) 8. CEBA-2012:0442 CentOS 6 lsof FASTTRACK Update (Johnny Hughes) 9. CEBA-2012:0445 CentOS 6 pcre FASTTRACK Update (Johnny Hughes) 10. CESA-2012:0451 Important CentOS 5 rpm Update (Johnny Hughes) 11. CESA-2012:0451 Important CentOS 6 rpm Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 3 Apr 2012 16:07:24 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0444 CentOS 6 cpio FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20120403160724.GA24302(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0444 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0444.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 8214d069d6fee5943503205414775ecdfe1e6c8249336beed4c1c72643b68b8a cpio-2.10-10.el6.i686.rpm x86_64: 7fb95781c7985952e9b64f625bca977b53f6772aa6d6bc04abf9c52e16f70197 cpio-2.10-10.el6.x86_64.rpm Source: d05ee0c6b40012e59b38f7433f68cd8d2cd18698e285a777bea38a598c9b009c cpio-2.10-10.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Tue, 3 Apr 2012 16:07:39 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0448 CentOS 6 system-config-printer FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20120403160739.GA24387(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0448 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0448.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 37ba95cfcdc57bf33b855060b56f8dbd5eb4814916d3941d7ec12cfdbc7348c7 system-config-printer-1.1.16-23.el6.i686.rpm 56dbf244bb3b5b16d3e0233ee59718ad6dfabef4c0a95b2f70cc7554bcbd5a7f system-config-printer-libs-1.1.16-23.el6.i686.rpm 0ca8c229c62432380c72cbc8d9497658dccbd9a11f325d9ff846b5d28c81be37 system-config-printer-udev-1.1.16-23.el6.i686.rpm x86_64: c3f90cb97694040aaf71a0dccc9d94c16dcfc1f9a2c180553d795aaf9e912af7 system-config-printer-1.1.16-23.el6.x86_64.rpm 978dedf438cb94279957bd3eb4b5b437256cdd47b800200558ab89f26b41b766 system-config-printer-libs-1.1.16-23.el6.x86_64.rpm 29d2f249bf425150b79cda6bf83ffa23333883e0ce6030ff718ddd7904d9f576 system-config-printer-udev-1.1.16-23.el6.x86_64.rpm Source: 60be687f44a35d215bb80308afd3b76aeecc5f77794075720e93561323ae8c40 system-config-printer-1.1.16-23.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Tue, 3 Apr 2012 16:07:50 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0443 CentOS 6 make FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20120403160750.GA24462(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0443 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0443.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: d7e90e0b37964d8757fae155419f6c1c386849730f9e4a07fe51b8a125b554d1 make-3.81-20.el6.i686.rpm x86_64: 0cf99ea29e8d190d97acfa8a4e6dceb6bc4f8fff220b818a98739659925272e0 make-3.81-20.el6.x86_64.rpm Source: feadd48e351f3e770b7ed6dfca6e290db6ebeab2d99c729415c034b13f369aa1 make-3.81-20.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Tue, 3 Apr 2012 16:08:01 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0449 CentOS 6 man FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20120403160801.GA24535(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0449 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0449.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 59487e1a63f22de229e6fe24a70643e6f3b3faebd988967b658b8fd823c73e91 man-1.6f-30.el6.i686.rpm x86_64: 440f2114fd4c3f46b6747ca3aee2defb884bce3330528304f9bb9faab5bdaa19 man-1.6f-30.el6.x86_64.rpm Source: d5fa104a30a3d7f2c7131930a6ebd048fb9cfae249f71e8cb3bdd76cda06939d man-1.6f-30.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Tue, 3 Apr 2012 16:08:24 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0450 CentOS 6 kdeartwork FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20120403160824.GA24643(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0450 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0450.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 7405d95bb78790589df26abdc2eea504405e1bbc31ca8fac4a24ce1145c74fdc kdeartwork-4.3.4-7.el6.i686.rpm e1ce4ea640edaa222ad17e3d7e8e4833bd60526be2f2ffbaefa24b6dd6689846 kdeartwork-screensavers-4.3.4-7.el6.i686.rpm 416bbe910aa946359ca2f206036a144bb0b6e482ef218df55b956c59598fbf64 kdeartwork-sounds-4.3.4-7.el6.noarch.rpm 797286843002edd20799234ce6bb6c001b5e6df984c7d9ccb32bcf707cbee7ab kdeartwork-wallpapers-4.3.4-7.el6.noarch.rpm ff373d3354520b7f8668aaa6f8a8391736ee81691a09f9a0ee986a63af930586 kde-style-phase-4.3.4-7.el6.i686.rpm f3541e446601f7578019df5950736e5d8f7281b5d8c4877bc4817709eeed9b7b nuvola-icon-theme-4.3.4-7.el6.noarch.rpm x86_64: 7802e358c7d4de20d11af4efc7e9580d5711db6176a0ee79869033d08455a37e kdeartwork-4.3.4-7.el6.x86_64.rpm e63e20ef4a389003dca8e41d9cd202cbf1dbe4c37f592de263dd447a5b68bd32 kdeartwork-screensavers-4.3.4-7.el6.x86_64.rpm c36876be2018005e1ddb208020d7798bfe4211ffdac003d50f08f0eeb34a1c24 kdeartwork-sounds-4.3.4-7.el6.noarch.rpm ae473a60f5368858a68c9e3aed2427fdf514513290cd10224c2a7cfda1718be9 kdeartwork-wallpapers-4.3.4-7.el6.noarch.rpm ff373d3354520b7f8668aaa6f8a8391736ee81691a09f9a0ee986a63af930586 kde-style-phase-4.3.4-7.el6.i686.rpm 0c2d6997222bdb1ac3c70fb6b67822a2718cf9f8281f60eebd7c7093e762c8f4 kde-style-phase-4.3.4-7.el6.x86_64.rpm 973a8cf9b34db6e89f3543440dd5746d6977dafa70883f3856d87cf388c3d2b2 nuvola-icon-theme-4.3.4-7.el6.noarch.rpm Source: d72e7de41eaa8a121de21d5de509e68cfed1aeab6efee9b9cdecc580bb736508 kdeartwork-4.3.4-7.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Tue, 3 Apr 2012 16:08:39 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0447 CentOS 6 portreserve FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20120403160839.GA24716(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0447 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0447.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: c449d6c444a45c5edd1c9ec03c5b73697f71f6512b76948576244d9ad1cb3fc4 portreserve-0.0.4-9.el6.i686.rpm x86_64: 37f08a8a532f695d89a63987b2cbd8144fb93573bf4f1fe7958a062a605e745a portreserve-0.0.4-9.el6.x86_64.rpm Source: 353b731668ac4880d1eeac78b00cc10d39ae4a3c0fd93aa87ab1dd10ab8ab2fe portreserve-0.0.4-9.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 7 Date: Tue, 3 Apr 2012 16:08:52 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0446 CentOS 6 SDL FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20120403160852.GA24805(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0446 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0446.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ce57df4f5c00f5310d51533b24b80e3c7e3996382222ac0dfb4c73ab17473b46 SDL-1.2.14-3.el6.i686.rpm 8c0388c6fc4176f7b464a0946be0046f737f7fb35afa15d8d23a36fb38061936 SDL-devel-1.2.14-3.el6.i686.rpm 5a791b338574e5f2c1432c0508eee5f7f42eab5d47201688309faef9b9d60df2 SDL-static-1.2.14-3.el6.i686.rpm x86_64: ce57df4f5c00f5310d51533b24b80e3c7e3996382222ac0dfb4c73ab17473b46 SDL-1.2.14-3.el6.i686.rpm 883c62475433d1b4603525dd5bc61e99d75ee5e30ce72c989eff965c953399be SDL-1.2.14-3.el6.x86_64.rpm 8c0388c6fc4176f7b464a0946be0046f737f7fb35afa15d8d23a36fb38061936 SDL-devel-1.2.14-3.el6.i686.rpm b62cede39badf78515f5012b7ecc01f5d8d606cdeab35f86ba609aed3acb2a2c SDL-devel-1.2.14-3.el6.x86_64.rpm 5a24204cb013fbba907c5a65f7f7740808f7b44d27e77e51e11723a790dc4097 SDL-static-1.2.14-3.el6.x86_64.rpm Source: c8a442d825217d0a4db1513b9252910c31a005ee2ddc8f57765ad9cac294d95f SDL-1.2.14-3.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 8 Date: Tue, 3 Apr 2012 16:09:03 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0442 CentOS 6 lsof FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20120403160903.GA24878(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0442 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0442.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 73447eac806b56cfc12c1b2630e5c9e730711d4b6ffd442c485027055039354b lsof-4.82-4.el6.i686.rpm x86_64: e0b3d89948b46ff9da01bc02b7a03d4950b5473caabe7ad379a3052e9ac70239 lsof-4.82-4.el6.x86_64.rpm Source: d960e2d399cc0c4db8f58e9ce5c2d7e1c6806bfc198610ff6712026323d4a1d0 lsof-4.82-4.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 9 Date: Tue, 3 Apr 2012 16:09:19 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0445 CentOS 6 pcre FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20120403160919.GA24963(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0445 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0445.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 7cc935ba0f8083b5215386440ca973dac55f8677692198e708d3e36efd2f46cb pcre-7.8-4.el6.i686.rpm 1727bf9b9c0e06ee577280b487b2a0fee1b17defb8cdcf3c3dc6b02b5f4072d4 pcre-devel-7.8-4.el6.i686.rpm c8ea5ea93135e58ecdbef9c49c3f840cc7d1254fadbb0213749fc16596b0f306 pcre-static-7.8-4.el6.i686.rpm x86_64: 7cc935ba0f8083b5215386440ca973dac55f8677692198e708d3e36efd2f46cb pcre-7.8-4.el6.i686.rpm dc273e610c9cc83e269d0bb61a56b6a234647e61706ea240344b452d158e2501 pcre-7.8-4.el6.x86_64.rpm 1727bf9b9c0e06ee577280b487b2a0fee1b17defb8cdcf3c3dc6b02b5f4072d4 pcre-devel-7.8-4.el6.i686.rpm 4dafb6098b89ce310b10738a3a5275b6d7893fcb76808db1f13bb24082684155 pcre-devel-7.8-4.el6.x86_64.rpm b549f6b2542f395293158472ecccbc14d094c09b668c597958e1d6e6139357a8 pcre-static-7.8-4.el6.x86_64.rpm Source: 50edbad038eb540a9b4ab30d988462a2976efd67ac1352f542e62416898d24fa pcre-7.8-4.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 10 Date: Tue, 3 Apr 2012 17:07:58 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:0451 Important CentOS 5 rpm Update To: centos-announce(a)centos.org Message-ID: <20120403170758.GA28529(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:0451 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2012-0451.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 5577c180a7db48e416592f76934f7f924094f9523be2b584239bd7d1564da140 popt-1.10.2.3-28.el5_8.i386.rpm e85c96749a51815d31b101fd1d547e0ce75fcdfe7b611826b0250647b48c4aba rpm-4.4.2.3-28.el5_8.i386.rpm f6b868f6eb0213ca634774e4b8644275c24a2bc5f2a13873932f0f8f10a65354 rpm-apidocs-4.4.2.3-28.el5_8.i386.rpm 47cd6618bb70e489b09c6f97910c039643cb6cbaf3a5359bc7c3be462995900e rpm-build-4.4.2.3-28.el5_8.i386.rpm 736bc6881e9bc665ee7c2f87c8b2b356b5c7490e2da899ba8b255d56f14d5cae rpm-devel-4.4.2.3-28.el5_8.i386.rpm 1354534f6cb3918c9e29ba2c195ec08e05a66e4d6fc5d077b5792aa4e7ae5db4 rpm-libs-4.4.2.3-28.el5_8.i386.rpm 8d23310b9a32632eb584f132a560464e95cd5e4311bd49a55b806e134baa69e0 rpm-python-4.4.2.3-28.el5_8.i386.rpm x86_64: 5577c180a7db48e416592f76934f7f924094f9523be2b584239bd7d1564da140 popt-1.10.2.3-28.el5_8.i386.rpm d7545dff13461235975e407e812804e99836a14237ac8d7e19bb7aa36f838d69 popt-1.10.2.3-28.el5_8.x86_64.rpm 799b53727a0648187dc78346f221db9dfa021fdb3109b3e87c7bb19b52b6887c rpm-4.4.2.3-28.el5_8.x86_64.rpm d4960063c23ae85cef89fb46c19d16865f50a287490dbeea8c7f1c1e9204a3e1 rpm-apidocs-4.4.2.3-28.el5_8.x86_64.rpm a294e73ea1cf2286386bd9c54f84f5e7fce8f93a06e68a29809d88ff7b8b9619 rpm-build-4.4.2.3-28.el5_8.x86_64.rpm 736bc6881e9bc665ee7c2f87c8b2b356b5c7490e2da899ba8b255d56f14d5cae rpm-devel-4.4.2.3-28.el5_8.i386.rpm 403fa01685a4c8f5b9871da1b1a2b615bb133d9c66463e0fe8f9ea919e80e5b2 rpm-devel-4.4.2.3-28.el5_8.x86_64.rpm 1354534f6cb3918c9e29ba2c195ec08e05a66e4d6fc5d077b5792aa4e7ae5db4 rpm-libs-4.4.2.3-28.el5_8.i386.rpm e61729f90aa65a588c8758bcc57547671d787c377c7005e5e8a410798de37c3e rpm-libs-4.4.2.3-28.el5_8.x86_64.rpm 7b5cd44d596284c8ed9a4738253b0af83d611d7de3aabae9407909d83e48eab3 rpm-python-4.4.2.3-28.el5_8.x86_64.rpm Source: d027077034a9df4e040c024fef4811ae806c7dba38720795417a809419ecc02b rpm-4.4.2.3-28.el5_8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 11 Date: Tue, 3 Apr 2012 17:42:24 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:0451 Important CentOS 6 rpm Update To: centos-announce(a)centos.org Message-ID: <20120403174224.GA30251(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:0451 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2012-0451.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 4f5feb9ab6255ac7afa832cd4fb7d4523b82ae5128224a55f27641c74777def7 rpm-4.8.0-19.el6_2.1.i686.rpm d98b18ce2593a697f68e3ca21b196afd42401dfcd6c8914653d4f8ff9e28b77f rpm-apidocs-4.8.0-19.el6_2.1.noarch.rpm 38033c9c21426bbec42aaca717877124b6397e234d217ae69f43d3b5a7368570 rpm-build-4.8.0-19.el6_2.1.i686.rpm 7d6f64c76813076e1a37021ff629bb62aebe60974f9ae6af5fc9003f1f82e78b rpm-cron-4.8.0-19.el6_2.1.noarch.rpm 8772717d180cec5c9b745a85e3da6b442f1d4d44a292a48120c453997a8e3cf4 rpm-devel-4.8.0-19.el6_2.1.i686.rpm e38cc6d4ce28d5f76dff1160a884ac9d5d46706b0d359ba099ac8140da6a3c18 rpm-libs-4.8.0-19.el6_2.1.i686.rpm 9ee1c2de45a5b104128048d2de55ff90eb4020d78c72f3ae7d58015b28618c6d rpm-python-4.8.0-19.el6_2.1.i686.rpm x86_64: 9e90a45f1927563280c1bcf92b22e1952d2284f71d5ae3984c0910e6d52591ce rpm-4.8.0-19.el6_2.1.x86_64.rpm cef3adda4030bde1645590c9a40227ae09cdc1fb08431f7b0a48abf149b3a2b6 rpm-apidocs-4.8.0-19.el6_2.1.noarch.rpm b2898914c91d6ea949a4a4b2ce9d8cd63f2b5a20dbcebfbef6d22aec37bce410 rpm-build-4.8.0-19.el6_2.1.x86_64.rpm 3bf33b3ecd338113dcb9a9efef220c9456b4ac1bf6c06cc45ee9eb993ff60af7 rpm-cron-4.8.0-19.el6_2.1.noarch.rpm 8772717d180cec5c9b745a85e3da6b442f1d4d44a292a48120c453997a8e3cf4 rpm-devel-4.8.0-19.el6_2.1.i686.rpm 5e63daa9c8366887c5d89832cef718d22bb567a89aacdcaf4dde63985941a1e2 rpm-devel-4.8.0-19.el6_2.1.x86_64.rpm e38cc6d4ce28d5f76dff1160a884ac9d5d46706b0d359ba099ac8140da6a3c18 rpm-libs-4.8.0-19.el6_2.1.i686.rpm 582300a15a31d03e92493802a50f64f7738715ffd6633412737287bbef3615d0 rpm-libs-4.8.0-19.el6_2.1.x86_64.rpm 541e64ceded59b93bd12963c465713f2fc65afc89f1d6aeb074dd9bed17b6b00 rpm-python-4.8.0-19.el6_2.1.x86_64.rpm Source: 1f2232b3dc5466918ff37029ae7a7136ed27d07116c86d896355ad19d9ce05c8 rpm-4.8.0-19.el6_2.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 86, Issue 3 **********************************************

1 0

CentOS 6.2 + areca raid + xfs problems
by Tony Schreiner 04 Apr '12

04 Apr '12

Two weeks ago I (clean-)installed CentOS 6.2 on a server which had been running 5.7. There is a 16 disk = ~11 TB data volume running on an Areca ARC-1280 raid card with LVM + xfs filesystem on it. The included arcmsr driver module is loaded. At first it seemed ok, but with in a few hours I started getting I/O error message on directory listings, and then a bit later when I did a vgdisplay command there was garbage in that. I then ran the volume check on the RAID card bios, it flagged 3 errors. When I restarted the system, things were ok, but then the problem reappeared. I ran another volume check and no errors were flagged (I should note, the check takes about 9 hours). but upon restarting, the file system was ok, but then went bad again. Another symptom was that the cli64 raid management utility, which I got from the Areca site would just hang. After a couple of days of this, I decided I could not afford to have this system unavailable, and I reinstalled CentOS 5.8. Everything has been fine since. Any body else seen anything like this? Tony Schreiner Boston College

3 4

centos 5 and 802.1x on wire
by Janez Kosmrlj 04 Apr '12

04 Apr '12

Has anyone managed to authenticate centos 5 on wired ethernet. I tried with wpa_supplicant but i won't work. Any help would be appreciated. Thanx.

4 3

SSL plugin not enabled - CentOS 6.2
by Prabhpal S. Mavi 04 Apr '12

04 Apr '12

Greetings Dear All, i am having difficulty o understand of the following log on CentOS_6.2 x86_64. i tried google it, but could not get any result at all. is anyone has come across & solve it? any help or suggestion would be highly appreciated Log: in /var/log/messages Apr 4 10:23:15 jet qpidd[2265]: 2012-04-04 10:23:15 notice SSL plugin not enabled, you must set --ssl-cert-db to enable it. Thanks / Regards Prabhpal S. Mavi

3 3

CentOS-announce Digest, Vol 86, Issue 2
by centos-announce-request＠centos.org 03 Apr '12

03 Apr '12

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2012:0440 CentOS 5 sssd Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 2 Apr 2012 18:12:49 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0440 CentOS 5 sssd Update To: centos-announce(a)centos.org Message-ID: <20120402181249.GA23149(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0440 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0440.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 6c78d74e7bcd556105c4de298914db2b4336738e0607c3a507589158fce3bf2f libipa_hbac-1.5.1-49.el5_8.1.i386.rpm b4135a322347fedf53bcd099a3f3dc5c6575c5c3823b1e4a2f195a17947c37f1 libipa_hbac-devel-1.5.1-49.el5_8.1.i386.rpm aa7b4f7a9eadbd6a3ec4b337e15cbfa93953b028a36febb528fcd1901dd60e89 libipa_hbac-python-1.5.1-49.el5_8.1.i386.rpm bba2ad61205d2711f830b76f0ff10f607474922c570d855c1c9c6635ce597413 sssd-1.5.1-49.el5_8.1.i386.rpm 2d048807a94ac9b0ec001b1a76c3b10720b463e3981b431e8bbe67498c32528d sssd-client-1.5.1-49.el5_8.1.i386.rpm 5a462839cae7513543e58695362978a4f586eee513783755fe14f87192692180 sssd-tools-1.5.1-49.el5_8.1.i386.rpm x86_64: ff7ff49d17d1e0445dd9885d8cfc6e80a28cc56248da4eadf03e333f58ed6ee2 libipa_hbac-1.5.1-49.el5_8.1.x86_64.rpm 8faf43497388e13985cb4b4188305dfb6c827a59954d665634bfce22af626e90 libipa_hbac-devel-1.5.1-49.el5_8.1.x86_64.rpm e11edbebd64718fae2e739aaa48b12a59397a263dc9f6647e02dabf3ba1c510b libipa_hbac-python-1.5.1-49.el5_8.1.x86_64.rpm c4402969972abb2e8c41f3e05eb26b97059b56544871e151c593063b455b0b5a sssd-1.5.1-49.el5_8.1.x86_64.rpm 2d048807a94ac9b0ec001b1a76c3b10720b463e3981b431e8bbe67498c32528d sssd-client-1.5.1-49.el5_8.1.i386.rpm bf0661ce9069186cd15b67a1e711099ae5b4100434a5efbf07dbd1ad7e0499a6 sssd-client-1.5.1-49.el5_8.1.x86_64.rpm 0b92010028f3884f19902b43e7d43a8720355ca30da846e3e9d21fda662147ec sssd-tools-1.5.1-49.el5_8.1.x86_64.rpm Source: f0cd988b5461756f32a416e523dbe6c268cef06561951474e248d130b12519af sssd-1.5.1-49.el5_8.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 86, Issue 2 **********************************************

1 0

centos 6.2 netinstall does not offer "create custom layout" at "Select type of installation " in text mode installation
by Aggelis Aggelis 03 Apr '12

03 Apr '12

I want to install centos 6.2 i386 on a pc with the following specs cpu 1.8 GHz p4 RAM 512 Mbyte HD: IDE 20 GByte i have downloaded netinstall iso and the installer proceeds AUTOMATICALLY in TEXT MODE until the point that i am asked to select the "Type of Installation" where i am presented with the following options ONLY 1) Use all space 2) Replace Existing Linux System 3) Use Free Space the problem is that whatever i choose the installer auto-partitions the hard drive which is something that i do not want. I suspect that due to the low specs of my pc the installer does not enter graphical mode installation which gives the "Create Custom Layout Option" in the "Type of Installation" step. Is this a bug of the installer in text mode and if not is there a workaround in order to be able to create a custom layout ?

6 8

Zero Configuration Networking on CentOS 5.8
by Kaushal Shriyan 03 Apr '12

03 Apr '12

Hi, I have read http://www.zeroconf.org/ Can someone please help me understand the pros and cons of Zero Configuration Networking (Zeroconf). I see the below settings. [kaushals@server ~]$ sudo /sbin/route [sudo] password for kaushals: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.169.10.0 * 255.255.255.0 U 0 0 0 bond0 169.254.0.0 * 255.255.0.0 U 0 0 0 bond0 default 192.169.10.21 0.0.0.0 UG 0 0 0 bond0 [kaushals@server ~]$ Regards, Kaushal

4 5

called a spammer today
by Bob Hoffman 03 Apr '12

03 Apr '12

thought you would find this interesting... I get a LOT of political spam on one of my mails due to hosting a political site once. I have been slowly blacklisting the bulk companies and 'the net' of private people pushing political spam. There is one guy who has been sending me stuff for years and I just have it go to the junk folder and deleted..forgot about it. New server, new rules. His came today. I wrote his university a nasty letter. I wrote him a nasty letter. (I had contacted him a few times in the years past to make him stop but he never did.) Well, tonight I got home...looked at his spam. Hey, it had his number on it. So I called him and told him to stop...told him why it bothered me. Told him somethings that happened to me in the past, what I like about websites. all sorts of junk, kept talking and making him listen to me.. He was getting impatient but I said 'now you know what it is like to have your uninteresting cr#p come in my mailbox.' He has agreed to stop spamming me....I told Him I blacklisted him anyway. I felt really good about that call...I think he will rethink his phone number on spam from now on. lol

3 2

minute cron
by Mihamina Rakotomandimby 03 Apr '12

03 Apr '12

Hi all, CentOs has choosen anacron as default cron daemon. I did not look further about the reasons, I think there are some good reasons. I want to create a minute based set of scripts. No much precision required, once a minute more or less 20 sec is OK. Using anacron, how do you recommend to do it? Is anacron the right tool? Otherwise what's the right tool? -- RMA.

3 2

transition to ip6
by Bob Hoffman 03 Apr '12

03 Apr '12

I imagine some day in the near future there will be a switch to ipv6. I cannot imagine ever remembering the ip address then...crazy. My question, since i have never done ip6 stuff, is what does that mean on my webservers? Would I just need to replace my ip4 with ip6 in my eths, bonds, bridges, and configuration files...and copy out my iptables to ip6tables, and change the dns servers? all that does not sound to harsh. anything especially daunting to make that switch (save from someone having to do that on 100 computers really fast!!) -bob

9 31

CentOS 6.2 vs 6.0
by Boris Epstein 02 Apr '12

02 Apr '12

Hello listamates, Has anyone tried 6.2? How good is it? Should I specifically download it to install on a new server I am configuring - or is 6.0 good enough in your opinion? Thanks. Boris.

2 1

selinux on/off percentage
by Min Wang 02 Apr '12

02 Apr '12

hi Just wondering if there is any statiscs report of selinxu usages in production environment? I know some still turn it off. thanks. min

12 16

NFS Hanging Under Heavy Load
by Aaron Blew 02 Apr '12

02 Apr '12

Hello all, I'm currently experiencing an issue with an NFS server I've built (a Dell R710 with a Dell PERC H800/LSI 2108 and four external disk trays). It's a backup target for Solaris 10, CentOS 5.5 and CentOS 6.2 servers that mount it's data volume via NFS. It has two 10gig NICs set up in a layer2+3 bond for one network, and two more 10gig NICs set up in the same way in another network. The host has a 99T XFS filesystem for the backups. RPCNFSDCOUNT is set to 256. During backups from clients the system exhibits odd hangs that interfere with some of our sensitive system's backup windows. On the NFS server side we see the following in dmesg. Originally I thought it was related to dirty writeback cache, but I adjusted dirty_writeback_centisecs and am still seeing the issue. dmesg during the problem window: Mar 16 07:01:21 *****store01 kernel: __ratelimit: 11 callbacks suppressed Mar 16 07:01:21 *****store01 kernel: nfsd: page allocation failure. order:2, mode:0x20 Mar 16 07:01:21 *****store01 kernel: Pid: 6041, comm: nfsd Not tainted 2.6.32-220.4.2.el6.x86_64 #1 Mar 16 07:01:21 *****store01 kernel: Call Trace: Mar 16 07:01:21 *****store01 kernel: <IRQ> [<ffffffff81123daf>] ? __alloc_pages_nodemask+0x77f/0x940 Mar 16 07:01:21 *****store01 kernel: [<ffffffff8115dc62>] ? kmem_getpages+0x62/0x170 Mar 16 07:01:21 *****store01 kernel: [<ffffffff8115e87a>] ? fallback_alloc+0x1ba/0x270 Mar 16 07:01:21 *****store01 kernel: [<ffffffff8115e2cf>] ? cache_grow+0x2cf/0x320 Mar 16 07:01:21 *****store01 kernel: [<ffffffff8115e5f9>] ? ____cache_alloc_node+0x99/0x160 Mar 16 07:01:21 *****store01 kernel: [<ffffffff8142186a>] ? __alloc_skb+0x7a/0x180 Mar 16 07:01:21 *****store01 kernel: [<ffffffff8115f4bf>] ? kmem_cache_alloc_node_notrace+0x6f/0x130 Mar 16 07:01:21 *****store01 kernel: [<ffffffff8115f6fb>] ? __kmalloc_node+0x7b/0x100 Mar 16 07:01:21 *****store01 kernel: [<ffffffff81461e65>] ? ip_rcv+0x275/0x350 Mar 16 07:01:21 *****store01 kernel: [<ffffffff8142186a>] ? __alloc_skb+0x7a/0x180 Mar 16 07:01:21 *****store01 kernel: [<ffffffff814219e6>] ? __netdev_alloc_skb+0x36/0x60 Mar 16 07:01:21 *****store01 kernel: [<ffffffffa0188104>] ? ixgbe_alloc_rx_buffers+0x2c4/0x380 [ixgbe] Mar 16 07:01:21 *****store01 kernel: [<ffffffff8127f980>] ? swiotlb_map_page+0x0/0x100 Mar 16 07:01:21 *****store01 kernel: [<ffffffffa0189158>] ? ixgbe_clean_rx_irq+0x818/0x8b0 [ixgbe] Mar 16 07:01:21 *****store01 kernel: [<ffffffffa01895ff>] ? ixgbe_clean_rxtx_many+0x10f/0x220 [ixgbe] Mar 16 07:01:21 *****store01 kernel: [<ffffffff814307c3>] ? net_rx_action+0x103/0x2f0 Mar 16 07:01:21 *****store01 kernel: [<ffffffff81072001>] ? __do_softirq+0xc1/0x1d0 Mar 16 07:01:21 *****store01 kernel: [<ffffffff810d9390>] ? handle_IRQ_event+0x60/0x170 Mar 16 07:01:21 *****store01 kernel: [<ffffffff8107205a>] ? __do_softirq+0x11a/0x1d0 Mar 16 07:01:21 *****store01 kernel: [<ffffffff8100c24c>] ? call_softirq+0x1c/0x30 Mar 16 07:01:21 *****store01 kernel: [<ffffffff8100de85>] ? do_softirq+0x65/0xa0 Mar 16 07:01:21 *****store01 kernel: [<ffffffff81071de5>] ? irq_exit+0x85/0x90 Mar 16 07:01:21 *****store01 kernel: [<ffffffff814f4c85>] ? do_IRQ+0x75/0xf0 Mar 16 07:01:21 *****store01 kernel: [<ffffffff8100ba53>] ? ret_from_intr+0x0/0x11 Mar 16 07:01:21 *****store01 kernel: <EOI> [<ffffffff8105673f>] ? finish_task_switch+0x4f/0xe0 Mar 16 07:01:21 *****store01 kernel: [<ffffffff814ec9ce>] ? thread_return+0x4e/0x760 Mar 16 07:01:21 *****store01 kernel: [<ffffffff81123741>] ? __alloc_pages_nodemask+0x111/0x940 Mar 16 07:01:21 *****store01 kernel: [<ffffffff814ed7b2>] ? schedule_timeout+0x192/0x2e0 Mar 16 07:01:21 *****store01 kernel: [<ffffffff8107c0a0>] ? process_timeout+0x0/0x10 Mar 16 07:01:21 *****store01 kernel: [<ffffffffa0319415>] ? svc_recv+0x5a5/0x850 [sunrpc] Mar 16 07:01:21 *****store01 kernel: [<ffffffff8105e7f0>] ? default_wake_function+0x0/0x20 Mar 16 07:01:21 *****store01 kernel: [<ffffffffa03fcb45>] ? nfsd+0xa5/0x160 [nfsd] Mar 16 07:01:21 *****store01 kernel: [<ffffffffa03fcaa0>] ? nfsd+0x0/0x160 [nfsd] Mar 16 07:01:21 *****store01 kernel: [<ffffffff81090726>] ? kthread+0x96/0xa0 Mar 16 07:01:21 *****store01 kernel: [<ffffffff8100c14a>] ? child_rip+0xa/0x20 Mar 16 07:01:21 *****store01 kernel: [<ffffffff81090690>] ? kthread+0x0/0xa0 Mar 16 07:01:21 *****store01 kernel: [<ffffffff8100c140>] ? child_rip+0x0/0x20 xfs_info: # xfs_info /data meta-data=/dev/sdb1 isize=256 agcount=99, agsize=268435200 blks = sectsz=512 attr=2 data = bsize=4096 blocks=26367491584, imaxpct=1 = sunit=256 swidth=9216 blks naming =version 2 bsize=4096 ascii-ci=0 log =internal bsize=4096 blocks=521728, version=2 = sectsz=512 sunit=8 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 cat /etc/centos-release: CentOS release 6.2 (Final) uname -a: Linux *****store01 2.6.32-220.4.2.el6.x86_64 #1 SMP Tue Feb 14 04:00:16 GMT 2012 x86_64 x86_64 x86_64 GNU/Linux lspci output: 00:00.0 Host bridge: Intel Corporation 5520 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:04.0 PCI bridge: Intel Corporation 5520/X58 I/O Hub PCI Express Root Port 4 (rev 13) 00:05.0 PCI bridge: Intel Corporation 5520/X58 I/O Hub PCI Express Root Port 5 (rev 13) 00:06.0 PCI bridge: Intel Corporation 5520/X58 I/O Hub PCI Express Root Port 6 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:09.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 9 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801IB (ICH9) 2 port SATA Controller [IDE mode] (rev 02) 01:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20) 01:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20) 02:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20) 02:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20) 03:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08) 04:00.0 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01) 04:00.1 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01) 05:00.0 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01) 05:00.1 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01) 06:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05) 08:03.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200eW WPCM450 (rev 0a) /etc/sysctl.conf changes: net.core.rmem_max = 16777216 net.core.wmem_max = 16777216 net.ipv4.tcp_rmem = 4096 2621440 16777216 net.ipv4.tcp_wmem = 4096 2621440 16777216 net.core.netdev_max_backlog = 250000 net.ipv4.route.flush = 1 net.ipv4.tcp_window_scaling = 1 vm.dirty_writeback_centisecs = 50 Has anyone else seem similar issues? I can provide additional details about the server/configuration if anybody needs anything else. The issue only seems to occur under high write load as we've restored some of these backups and didn't seem to have an issue reading the data. Thanks all, -Aaron

2 4

CentOS-announce Digest, Vol 86, Issue 1
by centos-announce-request＠centos.org 02 Apr '12

02 Apr '12

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2012:0437 CentOS 5 device-mapper-multipath Update (Johnny Hughes) 2. CEBA-2012:0438 CentOS 5 wget Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 2 Apr 2012 10:07:19 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0437 CentOS 5 device-mapper-multipath Update To: centos-announce(a)centos.org Message-ID: <20120402100719.GA31412(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0437 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0437.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: c3582da63aa309fe94d47999728557129a20e9f8a4ab6162a2eac8af073e5b7d device-mapper-multipath-0.4.7-48.el5_8.1.i386.rpm 468adaa8336a85d21ccefb88a08b38c2d411f0266676205f7fcfc6d6d946fdc5 kpartx-0.4.7-48.el5_8.1.i386.rpm x86_64: 9a51f3a313b84b021dfae9da9356da939f0d98c88bc6bb22f7ddba5f2f465b6c device-mapper-multipath-0.4.7-48.el5_8.1.x86_64.rpm d6ba1caaf305ec296475d9455ed63104319d523757937da72c4334cd282a0ef0 kpartx-0.4.7-48.el5_8.1.x86_64.rpm Source: d11883b6398301cc006afcc013f51a4cc335919145618a100f4921e8ab28d9d7 device-mapper-multipath-0.4.7-48.el5_8.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 2 Apr 2012 10:08:10 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0438 CentOS 5 wget Update To: centos-announce(a)centos.org Message-ID: <20120402100810.GA31520(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0438 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0438.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 29cc5f23ca9efa0bf4ad70af470a03bcdc251af5703c130c34d097b82a6454fb wget-1.11.4-3.el5_8.1.i386.rpm x86_64: 625142aae0c51fb0641e09c061acaf94bec686448284fcf3374118e5b189b740 wget-1.11.4-3.el5_8.1.x86_64.rpm Source: 19a2f7dc5a3f3a2fc71debae96c86f0605171006c769a0a1023e1c289fdd1b96 wget-1.11.4-3.el5_8.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 86, Issue 1 **********************************************

1 0

Grails 1.3.x (S)RPM for CentOS 6?
by Patrick Lists 02 Apr '12

02 Apr '12

Hi, My Google foo came up empty. Does anyone know where I can find a Grails 1.3.x (S)RPM? Thanks! Patrick

2 2

SPF Setup CentOS 6.3 x86_64
by Prabhpal S. Mavi 02 Apr '12

02 Apr '12

Dear Friends Greetings, i wish to setup SPF look up f0r Postfix on CentOS 6.2. I could not find any document on the net describing the procedure. is anyone have documentation i can follow to setup the SPF please? Thanks / Regards Prabhpal S. Mavi

3 3

Postfix problems with maximum messages size
by James B. Byrne 01 Apr '12

01 Apr '12

CentOS-6.2 I am confused. I need to accept messages somewhat larger than the default 10M allowed by Postfix. However, changing the message_size_limit in /etc/postfix/main.cf is having no effect. Squirrelmail is configured to accept and transmit messages up to 24M and this identical configuration is working on a Sendmail installation. So the problem appears to me to be strictly at Postfix matter. # grep message_size_limit /etc/postfix/* /etc/postfix/main.cf:message_size_limit = 20480000 # postfix reload postfix/postfix-script: refreshing the Postfix mail system # postconf -n | grep size_limit message_size_limit = 20480000 smtp message generated to squirrelmail client Message not sent. Server replied: Requested mail action aborted: exceeding storage allocation 552 5.2.3 Message exceeds maximum fixed size (12000000) What is going on? Why am I unable to have configured limit of 20M take effect? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

3 2

SMTP Port 465 - Postfix
by Prabhpal S. Mavi 31 Mar '12

31 Mar '12

Greetings Dear Friends ! i have Postfix Running On CentOS 6.2 x86_64, TLS/SASL is already configured and working. Can anyone please assist me how to configure Postfix to listen and accept TLS connections on smtp:465? Thanks / Regards Prabhpal S. Mavi

7 14

nfslock
by m.roth＠5-cent.us 31 Mar '12

31 Mar '12

I just updated one of our servers to 5.8, and rebooted. In the logs, I saw a bunch of Mar 21 16:29:02 <server> rpc.statd[9783]: recv_rply: can't decode RPC message! Mar 21 16:29:33 <server> last message repeated 442 times Mar 21 16:30:34 <server> last message repeated 835 times Mar 21 16:31:36 <server> last message repeated 884 times Mar 21 16:32:38 <server> last message repeated 856 times Mar 21 16:32:44 <server> last message repeated 111 times I tried restarting nfslock, and that *appears* to have fixed it. Googling, I found a thread about that at <http://nerdbynature.de/s9y/archives/2009/08.html>, which suggests that it's starting too early, possibly before portmap is running. Anyone else see this? Has an old bug snuck back in? mark

10 18

About Postfix mail server using dovecot and courier imap configuration
by jiten jha 31 Mar '12

31 Mar '12

Dear Friends, I am new in server side so i want to configure new Postfix mail server using dovecot or courier imap configuration . But I want courier for configure server . I do not want any database for store mails and users information. It just like create users then all mail goes to users home folder. Like useradd /home/jiten/ then all mail store in my jiten folders. Please help me it is urgent for me. -- Regards Jitendra Jha

3 3

Problem with PHP / Postgresql on CentOS6.2
by Rudinei Dias 31 Mar '12

31 Mar '12

HI. I have instaled a WEB server with Postgresql on CentOS 6.2. PostgreSQL, versin 9.1.3 x64 from EntrrpriseDB base *.run*. PHP with PDO from YUM using reposity versions. On start apache does not get error. PHP LOG under, with PDO error. *PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/pdo_pgsql.so' - libpq.so.5: failed to map segment from shared object: Permission denied in Unknown on line 0 *PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/pdo_pgsql.so' - libpq.so.5: failed to map segment from shared object: Permission denied in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/xsl.so' - libxslt.so.1: failed to map segment from shared object: Permission denied in Unknown on line 0 [Tue Mar 27 09:35:17 2012] [notice] Apache/2.2.15 (Unix) DAV/2 PHP/5.3.3 mod_ssl/2.2.15 OpenSSL/1.0.0-fips configured -- resuming normal operations I try to reinstall all PHP modules and get this messages Installing : php-xml-5.3.3-3.el6_2.6.x86_64 14/24 Installing : php-intl-5.3.3-3.el6_2.6.x86_64 15/24 Installing : php-embedded-5.3.3-3.el6_2.6.x86_64 16/24 */sbin/ldconfig: /opt/PostgreSQL/psqlODBC/lib/libpq.so.5 is not a symbolic link* Installing : php-soap-5.3.3-3.el6_2.6.x86_64 17/24 Installing : php-mbstring-5.3.3-3.el6_2.6.x86_64 18/24 Installing : php-snmp-5.3.3-3.el6_2.6.x86_64 19/24 PostgreSQL an APACHE runs normal and PHP does not recognize php_pgsql/pdo_pgsql. How i fix this mess? Thanks. -------------------------------------- Rudinei Dias

7 10

Linux on touch screen device
by Nataraj 30 Mar '12

30 Mar '12

I have poked around in google and have seen a number of youtube videos, but my question is whether anyone really has linux running on any kind of tablet or tablet PC device in such a way that the touch screen can be used productively and it won't take a month to get it running? Initially the two applications that are of most interest to me would be a good web browser (maybe chromium) and thunderbird. I would also like to have a decent on screen keyboard which could be used to ssh to servers in an emergency. I've seen instructions for booting linux on various devices, but many people doing this are using keyboards and not touchscreens. Do applications like thunderbird have to be modified in order to work well with a touch screen or is just getting a working driver for the touchpad sufficient? If anyone has any experience with this I would appreciate knowing what hardware your running on and what linux distro/desktop environment you use. I've been interested in devices like the ASUS EP121 which is a dual core I5, so it wouldn't be necessary to have an ARM distribution. Also the newest Asus transformer prime (arm) which I think is about 2 months away sounds interesting. Nataraj

5 6

my spammer list
by Bob Hoffman 30 Mar '12

30 Mar '12

Hello, Thanks to some nice people on here and other forums I have pretty much finalized my whole mail system on centos 6.x. With all the checks, greylisting, dev/null of any 8+ spam level SA, I still get a few mails. It seems like everytime I enable a new protectant, the mail stops spamming for a few hours...then the spammers decide I am worthy of using better methods against me..and more come. LOL. I am down to just 10-15 a day. Anything that gets through all that I set up now goes to a spammers list that I add to the access file of postfix. http://bobhoffman.com/spammers.html that is the link to my list. I am trying to sort them out into political, real estate, bulk spammers, etc. The worst part is the bulk emailers are not on any black list. It is very hard to find their mail MX until they actually send you one. Many will be blocked, then a new alternate of theirs comes through. I could not find a list of bulk commercial spammers so I thought I would start one. As I progress it will become more defined, but right now a big list with some categories after it. Hope it helps.

4 6

IPv6 routing failure on CentOS5
by Steve Snyder 30 Mar '12

30 Mar '12

I can't get IPv6 routing to configure correctly despite everything I've read saying it should This is my network config on a fully-updated CentOS 5.8 system: # cat /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=yes HOSTNAME=my.hostname.com GATEWAY=aaa.bbb.ccc.ddd IPV6_DEFAULTGW=2a02:aaaa.bbbb::1 IPV6_DEFAULTDEV=eth0 # cat /etc/sysconfig/network-scripts/ifcfg-eth0 ONBOOT=yes DEVICE=eth0 BOOTPROTO=static HWADDR=52:54:00:68:42:1E IPADDR=000.111.222.333 NETMASK=255.255.255.128 IPV6INIT=yes IPV6ADDR=2a02:aaaa.bbbb:178:209:50:230:0/112 Attempts to use the IPv6 address fail. For example: # ping6 -c 2 2a00:1450:4016:800::1013 connect: Network is unreachable However it works if I manually enter these 2 lines: # route -A inet6 add ::/0 dev eth0 # ip -6 route add 2000::/3 via 2a02:aaaa.bbbb::1 metric 1 # ping6 -c 2 2a00:1450:4016:800::1013 PING 2a00:1450:4016:800::1013(2a00:1450:4016:800::1013) 56 data bytes 64 bytes from 2a00:1450:4016:800::1013: icmp_seq=0 ttl=57 time=91.2 ms 64 bytes from 2a00:1450:4016:800::1013: icmp_seq=1 ttl=57 time=95.3 ms These are the routing table entries added by my hand-added configuration: 2000::/3 via 2a02:418:6a04::1 dev eth0 metric 1 expires 21333054sec mtu 1500 advmss 1440 hoplimit 4294967295 default dev eth0 metric 1 expires 21333054sec mtu 1500 advmss 1440 hoplimit 4294967295 So... given the parameters set in my config files, why are the CentOS v5.8 initscripts not configuring my IPv6 routing correctly? One more thing. I get this output on network start up (prior to hand-configuration): Bringing up interface eth0: WARN : [ipv6_add_route] 'No route to host' adding route '::/0' via gateway '2a02:aaaa.bbbb::1' through device 'eth0' Thanks.

1 1

CentOS-announce Digest, Vol 85, Issue 15
by centos-announce-request＠centos.org 30 Mar '12

30 Mar '12

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEEA-2012:0435 CentOS 6 gdm Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 29 Mar 2012 18:24:34 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2012:0435 CentOS 6 gdm Update To: centos-announce(a)centos.org Message-ID: <20120329182434.GA24293(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2012:0435 Upstream details at : https://rhn.redhat.com/errata/RHEA-2012-0435.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 86a8697001bce08153785f2f35e597adad90ffc131d5ff42f733112292412f5c gdm-2.30.4-33.el6_2.i686.rpm a88b0a58182334360e5812072547dd70e67bc35bdfd05a0c82aed964cf368be1 gdm-libs-2.30.4-33.el6_2.i686.rpm 427ee92d1fc1a9d5eabf2103b547b101b1b0f56365df6467ed64a07ce98659da gdm-plugin-fingerprint-2.30.4-33.el6_2.i686.rpm 55d9c767a483c9c40878804bbfa0f351bd9f95bd7b1c4f9d6fff7c8cd0eb92e1 gdm-plugin-smartcard-2.30.4-33.el6_2.i686.rpm 87030a80cbc1a333782a7cf197b0d48d0403320e5278dcd2a08839a87eb00dcd gdm-user-switch-applet-2.30.4-33.el6_2.i686.rpm x86_64: c2acd45532a6d500c59de483772e1808985b0ddea090cdfd44dbe1cf6f3f651e gdm-2.30.4-33.el6_2.x86_64.rpm a88b0a58182334360e5812072547dd70e67bc35bdfd05a0c82aed964cf368be1 gdm-libs-2.30.4-33.el6_2.i686.rpm 403d9d7a7757a847a2d068eea21baa8a2c8e84dcb8dc2a88771d214011a9b70e gdm-libs-2.30.4-33.el6_2.x86_64.rpm ac8fb81e1c351e9a72caf268966996f3923e73b845899979bdffa1170ec0ae68 gdm-plugin-fingerprint-2.30.4-33.el6_2.x86_64.rpm 2516b124ed4e79d2fc1abb5da24685bfd28916491cb19ed7210d92d8a4517cf4 gdm-plugin-smartcard-2.30.4-33.el6_2.x86_64.rpm 2c13e7596ec8d187f4a14a051574bbe945ee6ee1e5ec946e3674071b09e4c669 gdm-user-switch-applet-2.30.4-33.el6_2.x86_64.rpm Source: 4365957ce99e24c8201e29c3d417db33b2ea03729ac77f90decc1a7096d2aa99 gdm-2.30.4-33.el6_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 85, Issue 15 ***********************************************

1 0

RAID-10 vs Nested (RAID-0 on 2x RAID-1s)
by Tim Nelson 30 Mar '12

30 Mar '12

Greetings- I'm about to embark on a new installation of Centos 6 x64 on 4x SATA HDDs. The plan is to use RAID-10 as a nice combo between data security (RAID1) and speed (RAID0). However, I'm finding either a lack of raw information on the topic, or I'm having a mental issue preventing the osmosis of the implementation into my brain. Option #1: My understanding of RAID10 using 4 drives (now known as a,b,c,d) is: a+b - RAID1 (md0) c+d - RAID1 (md1) md0+md1 - RAID0 (md3) This is of course simplified as /boot needs to be on RAID1 (last I checked Grub couldn't boot from anything other than RAID1). Option #2: I've also found the kernel provides a direct method of RAID10 without the manual assignment of the arrays as noted above. I performed a test installation, selecting RAID10 as the type in the installer, and it "works" but I'm just not seeing the distinction between what disks/partitions are actually the mirror or stripe portion of the array. Details: [root@c6r10tester ~]# mdadm --detail /dev/md1 /dev/md1: Version : 1.1 Creation Time : Thu Mar 29 16:14:17 2012 Raid Level : raid10 Array Size : 36695040 (35.00 GiB 37.58 GB) Used Dev Size : 18347520 (17.50 GiB 18.79 GB) Raid Devices : 4 Total Devices : 4 Persistence : Superblock is persistent Intent Bitmap : Internal Update Time : Thu Mar 29 16:28:49 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 0 Spare Devices : 0 Layout : near=2 Chunk Size : 512K Name : c6r10tester:1 (local to host c6r10tester) UUID : be38645d:4d3c8b77:0f6df687:08016c6a Events : 51 Number Major Minor RaidDevice State 0 8 3 0 active sync /dev/sda3 1 8 19 1 active sync /dev/sdb3 2 8 35 2 active sync /dev/sdc3 3 8 51 3 active sync /dev/sdd3 Am I overthinking this? Does the kernel handle the mirror/stripe configuration under the hood, simply presenting me with a magical RAID10 array? Or, is this something different and I really should be performing the RAID creation manually as noted in option #1? Help me CentOS-Kenobi, you're my only hope. --Tim

4 4

Dual Monitor setup on CentOS 6?
by Toralf Lund 30 Mar '12

30 Mar '12

Hi. Is anyone here running CentOS 6 with dual monitors configured as a single X Screen? I'm trying such a setup on version 5 (again), using NVIDIA TwinView, and it works in many ways, but there are a number of problems that means it's not too usable - the most important one being that there appears to be no way to control which of the displays new applications/windows will appear on. I mean, I don't necessarily need to be able to configure this or anything, but I would at least expect programs to open on the monitor that displaying the menu item or icon or terminal or whatever used for startup, but often they end up on the other one. So I guess my question is, would upgrading to version 6 help? - Toralf This e-mail, including any attachments and response string, may contain proprietary information which is confidential and may be legally privileged. It is for the intended recipient only. If you are not the intended recipient or transmission error has misdirected this e-mail, please notify the author by return e-mail and delete this message and any attachment immediately. If you are not the intended recipient you must not use, disclose, distribute, forward, copy, print or rely on this e-mail in any way except as permitted by the author.

3 3

udev works ok in CentOS 6.x??
by C. L. Martinez 30 Mar '12

30 Mar '12

Hi all, I have strange problem with my persistent names applied to iscsi disks. I have configured an udev rule to assign static iscsi disk names: KERNEL=="sd[a-z]", SUBSYSTEM=="block", PROGRAM="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1iTGTDSK9a2c73ce654d0ca6", NAME="iscsi/sda" KERNEL=="sd[a-z][0-9]*", SUBSYSTEM=="block", PROGRAM="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1iTGTDSK9a2c73ce654d0ca6", NAME="iscsi/sda%n" When udev starts, it seems it works: [root@cossrv01 rules.d]# ls -la /dev/iscsi/sda brw-rw---- 1 root disk 8, 16 Mar 12 11:42 /dev/iscsi/sda After this, I try to create a lvm volume: [root@cossrv01 rules.d]# pvcreate /dev/iscsi/sda ... and works. But: [root@cossrv01 rules.d]# pvdisplay --- Physical volume --- PV Name /dev/sdb VG Name cmdata PV Size 64.00 GiB / not usable 4.00 MiB Allocatable yes PE Size 4.00 MiB Total PE 16382 Free PE 12542 Allocated PE 3840 PV UUID rSuu5T-VtRl-ffDd-5Vtm-CBhS-UffO-sFgCRX Why? Why pvdisplay doesn't shows /dev/iscsi/sda instead of /dev/sdb?? It is a big problem when multiple iscsi disks are assigned in aleatory form ... and with CentOS 5.x this procedure works out of the box ... (with RHEL6.x doesn't works neither, but it works with RHEL5.x). Thanks.

7 15

mismatch in openssh latest rpm available at centos
by Vinay Nagrik 30 Mar '12

30 Mar '12

Hello Group, The latest rpm in openssh is 5.8, however, the corresponding latest rpm available in centos 5.7 is only openssh-4.3p2-72.el5_6.3.x86_64.rpm and in 6.0 centos is openssh-5.3p1-20.el6.x86_64.rpm I have following questions. 1. I want to start from src.rpm and where can I get the src.rpm for openssh-5.3p1-20.el6.x86_64.rpm. 2. Can I install openssh-5.3p1-20.el6.x86_64.rpm SAFELY with 5.7 centos without causing any problems. 3. Which of these two rpms will be most compatible with latest openssh rpm version 5.8. Please let me know. It is important for my work. Any help will be greatly appreciated. -- Thanks Nagrik

5 5

Re: [CentOS] ugly login screen - squirrel
by Prabhpal S. Mavi 29 Mar '12

29 Mar '12

Dear Friends Greetings, i am CentOS User for some years now, have installed and configured squirrelmail number of times without issues. but this time it is on CentOS 6.2 x64 - i see very ugly login interface. of squirrelmail, i wish to mention that the package was installed from epelrepo becuse it is not available on centos or rpmforge repo either. i can login also, after login this is how i see the inside interface. id anyone has come across the same? any solution? here is what i see on squirrelmail login page: bgcolor="#ffffff" border="0" cellspacing="0" cellpadding="0" width="100%"><><> SquirrelMail Logo SquirrelMail version 1.4.22-2.el6 By the SquirrelMail Project Team < bgcolor="#ffffff" border="0" width="350"><>< bgcolor="#dcdcdc">SquirrelMail Login <>< bgcolor="#ffffff"> < bgcolor="#ffffff" border="0" width="100%"><>< width="30%">Name: < width="70%"> <>< width="30%">Password: < width="70%"> <><> Thanks / Regards Prabhpal S. Mavi Email: prabhpal(a)digital-infotech.net

4 5

process accounting on 5.7
by Alan McKay 29 Mar '12

29 Mar '12

Hey folks, I turned on process accounting and had a peek at the man page for dump-acct but I am still left wondering how best to make use of this info. We want to be able to produce some monthly stats on which labs are using how much of our clusters. I know our clustering software has the ability to do this but unfortuantely not everyone uses the cluster commands as much as I keep reminding them. Would be nice to be able to show that user X used Y% of the CPU in a given month. I've been googling but not turning up much more than how to install psacct and run the base commands. thanks, -Alan -- “Don't eat anything you've ever seen advertised on TV” - Michael Pollan, author of "In Defense of Food"

2 4

xorg.conf disappear
by brick 29 Mar '12

29 Mar '12

Hi My system is CentOS 6. I need to edit xorg.conf. But it can't be find in /etc/X11. Where is it? How can I get the default setting? Thanks. brick

7 6

How to restrict reboot/poweroff from non-admins?
by Timo Neuvonen 29 Mar '12

29 Mar '12

I just noticed that CentOS (6.2) by default allows any user to reboot/poweroff system without any admin rights, or without any further questions, if using commands 'reboot' or 'poweroff'. But 'shutdown' still requires admin rights. What is the preferred way to restrict any regular user from rebooting / powering off the system (by accident)? IMHO, sudo should be required for this purpose (at least in a system with shared remote access from multiple users, single-user laptops etc may be a different case) -- TiN

5 8

One disk speed problem [SOLVED], and a question on hdparm
by m.roth＠5-cent.us 29 Mar '12

29 Mar '12

I believe I've posted before about one of the speed issues we were having, of backups taking many, many hours that should *not* take that long. My manager and I finally nailed it down to the h/d itself. Identical boxes, and he tried a backup of one system which took under two hours, while the same regular one rand nearly six. I'd been googling on and off for weeks, and this morning, ran across something: partition alignment. A thread where someone who'd done some tests and found that was his problem. So, here's the answer: we have these Caviar Green 2tb drives (the thread I found had either a 1tb, or 1.5tb), (and no, we are *NOT* going to buy Caviar Green for servers ever again). The big thing is that they use 4k sectors, *not* 512 bytes. Following directions, I pulled it into fdisk, and then used a command I've not needed before: u. This changes units from cylinders (the default) to sectors. Having done that, p shows that it actually starts in sector 63. Again, following directions, I changed it to start in sector 64. Finished the partition, wrote it, made the filesystem, and tried it out. 177G transferred in 1h 47+m. So, anyone who's got new drives that use 4k sectors should probably follow this. This also probably explains parted's completely aggravating complaint that the partition's not aligned, but gives you no idea *why*, or how to align it - I pulled the drive into parted, and told it to print, and it did *not* complain the partition wasn't aligned. Next trick: hdparm. I want to disable, or at least shove way up, the spindown timeout on these drives, which, depending on the thread you read, is 6 or 8 seconds. hdparm should let me do that... but before I do, I'd like to know what it's set at. Does anyone know how to find that out? And no, the manpage is wrong, hdparm -B <no parm) /dev/sdx does *not* read it, it just complains it's missing the parm. mark

7 16

Need help configuring wireless NIC
by Marko Vojinovic 28 Mar '12

28 Mar '12

Hi everyone! :-) Yesterday I managed to find a driver for my USB wireless dongle, and it is now correctly recognized by the kernel. However, I don't know how to configure it. The system-config-network opens up in text mode and is not very forthcoming (it lists ethernet, ISDN and modem as possibilities for configuring a new device). I don't know how to create an /etc/sysconfig/network-scripts/ifcfg-whatever manually for my wireless card. NetworkManager doesn't see the device since the ifcfg* script doesn't exist. What am I supposed to do? (Google also didn't help...). The device is listed by lsusb as: # lsusb | grep 802 Bus 001 Device 005: ID 1286:1fab Marvell Semiconductor, Inc. 88W8338 [Libertas] 802.11g The libertas kernel module is loaded: # lsmod | grep liber libertas 105931 0 cfg80211 164625 1 libertas lib80211 4194 1 libertas How do I find out the name of the device, and how do I create the ifcfg script properly? Best, :-) Marko

4 5

Re: [CentOS] parallel bash scripts
by Mark LaPierre 28 Mar '12

28 Mar '12

Check out the redirection at the end of each command. 1>&2 redirects the standard out of your child command to the standard error which then appears in the parent shell. At the end the last & launches your command into a background shell and then moves on to launch the next command. The redirections don't care if the command ever terminates. The result is that both commands are launched and the parent shell terminates leaving the standard error attached to the terminal that the parent was launched in. On 03/27/2012 09:08 PM, bruce wrote: > marklapier(a)aol.com > > hey mark.... > > what you have, appears to be pretty close to what i had... except my > tests never ended... the loops are infinite... > > can i do a fpaste and have you take a look at what i have? > > -btuce > > > On Tue, Mar 27, 2012 at 9:00 PM, Mark LaPierre<marklapier(a)aol.com> wrote: >> On 03/27/2012 05:25 PM, bruce wrote: >>> >>> hi. >>> >>> got a couple of test bash scripts. >>> >>> dog.sh, cat.sh >>> each script runs the underlying php in an endless loop. >>> >>> I'm trying to figure out how to run the scripts in parallel, from the >>> same parent shell script. something like: >>> >>> test.sh >>> >>> >>> where dog.sh would be : >>> -------------------------------- >>> while true >>> do >>> pgrep dog >>> if [ $? -ne 0 ] >>> then >>> /dog.php >>> fi >>> sleep 5 >>> done >>> >>> my current tests, run dog.sh, which runs the dog.php ... but the test >>> never gets to run cat.sh >>> >>> thoughts/comments... >>> >>> thanks >> >> Hey Bruce, >> >> Do you mean to run these subprograms in parallel or in series? >> >> cat.sh >> #! /bin/bash >> >> CAT=0 >> until [ $CAT -eq 10 ] >> do >> echo "Inside a dog it's too dark to read. $CAT" >> CAT=$[$CAT + 1] >> sleep 2 >> done >> >> >> dog.sh >> #! /bin/bash >> >> DOG=0 >> until [ $DOG -eq 10 ] >> do >> echo "Next to a dog a book is man's best friend. $DOG" >> DOG=$[$DOG + 1] >> sleep 2 >> done >> >> >> test.sh >> #! /bin/sh >> >> /home/mlapier/test/dog.sh 1>&2& >> /home/mlapier/test/cat.sh 1>&2& >> >> >> [mlapier@mushroom test]$ ./test.sh >> [mlapier@mushroom test]$ Next to a dog a book is man's best friend. 0 >> Inside a dog it's too dark to read. 0 >> Next to a dog a book is man's best friend. 1 >> Inside a dog it's too dark to read. 1 >> Next to a dog a book is man's best friend. 2 >> Inside a dog it's too dark to read. 2 >> Next to a dog a book is man's best friend. 3 >> Inside a dog it's too dark to read. 3 >> Next to a dog a book is man's best friend. 4 >> Inside a dog it's too dark to read. 4 >> Next to a dog a book is man's best friend. 5 >> Inside a dog it's too dark to read. 5 >> Next to a dog a book is man's best friend. 6 >> Inside a dog it's too dark to read. 6 >> Next to a dog a book is man's best friend. 7 >> Inside a dog it's too dark to read. 7 >> Next to a dog a book is man's best friend. 8 >> Inside a dog it's too dark to read. 8 >> Next to a dog a book is man's best friend. 9 >> Inside a dog it's too dark to read. 9 >> >> >> >> -- >> users mailing list >> users(a)lists.fedoraproject.org >> To unsubscribe or change subscription options: >> https://admin.fedoraproject.org/mailman/listinfo/users >> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines >> Have a question? Ask away: http://ask.fedoraproject.org

2 1

CentOS-announce Digest, Vol 85, Issue 14
by centos-announce-request＠centos.org 28 Mar '12

28 Mar '12

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2012:0425 CentOS 6 ruby Update (Johnny Hughes) 2. CESA-2012:0426 Moderate CentOS 5 openssl Update (Johnny Hughes) 3. CESA-2012:0428 Important CentOS 5 gnutls Update (Johnny Hughes) 4. CESA-2012:0426 Moderate CentOS 6 openssl Update (Johnny Hughes) 5. CESA-2012:0427 Important CentOS 6 libtasn1 Update (Johnny Hughes) 6. CESA-2012:0429 Important CentOS 6 gnutls Update (Johnny Hughes) 7. CEBA-2012:0432 CentOS 5 ksh Update (Johnny Hughes) 8. CEBA-2012:0430 CentOS 6 curl Update (Johnny Hughes) 9. CEBA-2012:0431 CentOS 6 libssh2 Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 27 Mar 2012 22:00:24 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0425 CentOS 6 ruby Update To: centos-announce(a)centos.org Message-ID: <20120327220024.GA24647(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0425 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0425.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 18bea475f7c517756c49cb1790cf19ceb4716deed1d21790ef3bd5fc24e9162f ruby-1.8.7.352-7.el6_2.i686.rpm d5b08aad7308a5e2d5060a6fa4914143caa91c11e0c6fffcfb5f23d9a4d27a29 ruby-devel-1.8.7.352-7.el6_2.i686.rpm 5a75b6dd4ae061907c45909cc313b598d91f0921df8768f64811776aab05df7b ruby-docs-1.8.7.352-7.el6_2.i686.rpm 93630f27334de6abdca322660b10dcbd48158af3de8ec39ced1d2fd046dfed30 ruby-irb-1.8.7.352-7.el6_2.i686.rpm b72d6fd01653433556b8ee4ff1a36b5474227d003eed518a9e9c17439fc8e3a2 ruby-libs-1.8.7.352-7.el6_2.i686.rpm 6784c3f275db48129ca0035520344540361ead087fb6df63dd87483dc8d8da3e ruby-rdoc-1.8.7.352-7.el6_2.i686.rpm aaa6fbc788410d4beedcf3ed21268fbcce47d32236734d254df642dba4b37db5 ruby-ri-1.8.7.352-7.el6_2.i686.rpm d401b7f7707998f39a55f2571cb357d0db44787bb6efe9969e305ab1a879e2cf ruby-static-1.8.7.352-7.el6_2.i686.rpm ba664a9bad3e4bdb1ec5df4f1eb14a13438fcb049599a02ccfee08893b19fde1 ruby-tcltk-1.8.7.352-7.el6_2.i686.rpm x86_64: 2f24283dbaad59585234ba9eb9b9fa272b9369de70ca418b33d45e45b0c56b8c ruby-1.8.7.352-7.el6_2.x86_64.rpm d5b08aad7308a5e2d5060a6fa4914143caa91c11e0c6fffcfb5f23d9a4d27a29 ruby-devel-1.8.7.352-7.el6_2.i686.rpm 8d243d933c9961e53dddd6597ddeb5e2575c644010f8e88440704d4926ac5eec ruby-devel-1.8.7.352-7.el6_2.x86_64.rpm 5af910e9c80d339f44cbcb50f4b27860cf1ea5da79d89d998fa406c320f65c15 ruby-docs-1.8.7.352-7.el6_2.x86_64.rpm 0302fd5a8e5ceee8ecbce9c0620f22949970072f176d302a8f5c71e2d7b5e41e ruby-irb-1.8.7.352-7.el6_2.x86_64.rpm b72d6fd01653433556b8ee4ff1a36b5474227d003eed518a9e9c17439fc8e3a2 ruby-libs-1.8.7.352-7.el6_2.i686.rpm daa90bb88be069f9bbb8beec985a5af5beb7a4e3339669397ebe3623f562484a ruby-libs-1.8.7.352-7.el6_2.x86_64.rpm 759d9151040059fdc053c37f923a849383c4109183e7f5514c7dd2f939ea3624 ruby-rdoc-1.8.7.352-7.el6_2.x86_64.rpm 4243ed2b1730230257785ffbf7208628a23a01a3b9ec895e2d089e08be07f502 ruby-ri-1.8.7.352-7.el6_2.x86_64.rpm b2a71a2ac70c804a95d5d43514a0bd3ec1ace93c852d4927995d4ad1c88ac00f ruby-static-1.8.7.352-7.el6_2.x86_64.rpm 29a518502fb35fdaf176d36a5cd62a2f4e059738378aa2a8a818ef02d1cfd0ff ruby-tcltk-1.8.7.352-7.el6_2.x86_64.rpm Source: 175b0e1d5f0065cbfb98dd3a93b4080e234a39106b8e3b28a0a005c16909a6ac ruby-1.8.7.352-7.el6_2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 28 Mar 2012 00:47:32 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:0426 Moderate CentOS 5 openssl Update To: centos-announce(a)centos.org Message-ID: <20120328004732.GA32647(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:0426 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2012-0426.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e4cbb2040ceb87bb345dbf94c41f24396b74ae803ecab4fa829834482eb8a652 openssl-0.9.8e-22.el5_8.1.i386.rpm 08d92c3195ac0fd6e0dac5172eebc536135864e4676b0c518e5cbc2363767798 openssl-0.9.8e-22.el5_8.1.i686.rpm c0f2075d0e79b12caee8c0a9c706495e767cfa1a31d2b136668cdefcb5b94213 openssl-devel-0.9.8e-22.el5_8.1.i386.rpm 02efaecbcdc7b7ced3b7ce92b074531ead164c967abefe364fa3c03b942a0e0b openssl-perl-0.9.8e-22.el5_8.1.i386.rpm x86_64: 08d92c3195ac0fd6e0dac5172eebc536135864e4676b0c518e5cbc2363767798 openssl-0.9.8e-22.el5_8.1.i686.rpm dc0661ffae107c5bc25c189012baf8c6957a63325c8345b63f860b914bf2f4bb openssl-0.9.8e-22.el5_8.1.x86_64.rpm c0f2075d0e79b12caee8c0a9c706495e767cfa1a31d2b136668cdefcb5b94213 openssl-devel-0.9.8e-22.el5_8.1.i386.rpm d036893bc49b7639d4095d812f34e29f34272f82da77a7459d82a6dcf7be2d6f openssl-devel-0.9.8e-22.el5_8.1.x86_64.rpm 9ed9044dc2d55f5d51b4443d8fb7f0475b8399a2a6fbffe6509b1b353492ed6f openssl-perl-0.9.8e-22.el5_8.1.x86_64.rpm Source: e6b592b7128a9703becdc9743fdf830d92975c6d333a9f0c947be9a1024c7679 openssl-0.9.8e-22.el5_8.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Wed, 28 Mar 2012 00:49:15 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:0428 Important CentOS 5 gnutls Update To: centos-announce(a)centos.org Message-ID: <20120328004915.GA314(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:0428 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2012-0428.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: ac1fbc58d4168ffe4dbf3b213b3662e649b3850f9fd3da6fc6a49f86e630a222 gnutls-1.4.1-7.el5_8.2.i386.rpm 183ddfe5a0ab433f6939a60bfb69d9355040902bc97fb9d028a3aeb4c0c5625a gnutls-devel-1.4.1-7.el5_8.2.i386.rpm 03dd9886544d4989fada08e62022783583e4b06a22f3b4539fc8991bf9204551 gnutls-utils-1.4.1-7.el5_8.2.i386.rpm x86_64: ac1fbc58d4168ffe4dbf3b213b3662e649b3850f9fd3da6fc6a49f86e630a222 gnutls-1.4.1-7.el5_8.2.i386.rpm 33fc35cba86f9562f18e9d8522b108fe018aadd3338dad699fbb4deb40d305e9 gnutls-1.4.1-7.el5_8.2.x86_64.rpm 183ddfe5a0ab433f6939a60bfb69d9355040902bc97fb9d028a3aeb4c0c5625a gnutls-devel-1.4.1-7.el5_8.2.i386.rpm a8768a259605cab40803c37fbcfb05310697da86767da16b2859bf9b84486737 gnutls-devel-1.4.1-7.el5_8.2.x86_64.rpm 6f6ea1cfe7fca56f8204b2a7cd12f298d76d29db80ccb04dfa2bf5ab4b469b52 gnutls-utils-1.4.1-7.el5_8.2.x86_64.rpm Source: 95d102a1fac2215a99e20131ed2e46d54d007b7f8c794f6b22b41eb810a61598 gnutls-1.4.1-7.el5_8.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Wed, 28 Mar 2012 01:11:59 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:0426 Moderate CentOS 6 openssl Update To: centos-announce(a)centos.org Message-ID: <20120328011159.GA1860(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:0426 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2012-0426.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 864e581f82a4b30e3867fdbf8095650a62cbda6f410fe410594845d146b0cd34 openssl-1.0.0-20.el6_2.3.i686.rpm 08bde8940caca0b47eaf9fd3a9b3b35eb8fc99b6bb07b16079969b516c32ab60 openssl-devel-1.0.0-20.el6_2.3.i686.rpm 17818e3b6396ead3a75b1a8cd68fa2c98900d6fc4f8511540a986edad6bc7942 openssl-perl-1.0.0-20.el6_2.3.i686.rpm e1c2b2bfd7260f900aa016adc75d3562cfd6e98be10ee6420f3fafe3dccc9907 openssl-static-1.0.0-20.el6_2.3.i686.rpm x86_64: 864e581f82a4b30e3867fdbf8095650a62cbda6f410fe410594845d146b0cd34 openssl-1.0.0-20.el6_2.3.i686.rpm 6fa0c535289e2fc53f5a194f29c018a8797882c565a6742c48b06785abb23a01 openssl-1.0.0-20.el6_2.3.x86_64.rpm 08bde8940caca0b47eaf9fd3a9b3b35eb8fc99b6bb07b16079969b516c32ab60 openssl-devel-1.0.0-20.el6_2.3.i686.rpm 3b647a39e499e612ae8c3af89897d368766702d87bf0e641faefad99983a2b1d openssl-devel-1.0.0-20.el6_2.3.x86_64.rpm c6022fc3c59425173944cabe384aa0e2e4ff5e79c753143b59289205ee013926 openssl-perl-1.0.0-20.el6_2.3.x86_64.rpm 082ae4ec687476d49a2ea72db6d4fcbfeab277d748e35dfab548f06751027c73 openssl-static-1.0.0-20.el6_2.3.x86_64.rpm Source: cc066f089a65ae78d2eb29a89ae5e30a777a32b2f67e89b7cf34833156cd722e openssl-1.0.0-20.el6_2.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Wed, 28 Mar 2012 01:12:20 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:0427 Important CentOS 6 libtasn1 Update To: centos-announce(a)centos.org Message-ID: <20120328011220.GA1964(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:0427 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2012-0427.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: f69bdc12199cd1875d8c3ba3bac9307866cb45124c88353fc5cd2d681719cc0e libtasn1-2.3-3.el6_2.1.i686.rpm 06210c22f9e1b0964384264cf654dd14fef40da79f929117e2a3061c7643bf89 libtasn1-devel-2.3-3.el6_2.1.i686.rpm 2d84e2c685a8009cad7fa68fe5775ae803104190166d368852883ba65077441e libtasn1-tools-2.3-3.el6_2.1.i686.rpm x86_64: f69bdc12199cd1875d8c3ba3bac9307866cb45124c88353fc5cd2d681719cc0e libtasn1-2.3-3.el6_2.1.i686.rpm 829622a7612aebe8190d1a38068ed6270441574320f0c792a927fd4e5e3c5ec5 libtasn1-2.3-3.el6_2.1.x86_64.rpm 06210c22f9e1b0964384264cf654dd14fef40da79f929117e2a3061c7643bf89 libtasn1-devel-2.3-3.el6_2.1.i686.rpm 94f1aac61bb07c91933b8ef2c54e9d04698b02da3ebb3a62d448be3c705cbda6 libtasn1-devel-2.3-3.el6_2.1.x86_64.rpm 43efd48174c0304be3e5ad85f06fa1c1c13d3dc5b9f71b98c493e1aa7be233ef libtasn1-tools-2.3-3.el6_2.1.x86_64.rpm Source: 1ca23e510872e2579b586924fe3533bcb9b9d2161533d2ec802e958efedd9625 libtasn1-2.3-3.el6_2.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Wed, 28 Mar 2012 01:12:42 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2012:0429 Important CentOS 6 gnutls Update To: centos-announce(a)centos.org Message-ID: <20120328011242.GA2062(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2012:0429 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2012-0429.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 48f7b95cb3496922467547cbb3d2a4e547f250b602985ef7dd5790956582f78a gnutls-2.8.5-4.el6_2.2.i686.rpm bef0935cff152981f318197938f891956f0e0ebb92a439c46d627ee16a3bb76e gnutls-devel-2.8.5-4.el6_2.2.i686.rpm 1bb962aaecc312f730457547160ba2459548105834a8e1b4de528a6514f4e669 gnutls-guile-2.8.5-4.el6_2.2.i686.rpm bbb987c49b686f35e45dcd116a5dff81589234e775c61af7b58d26d24a4957f5 gnutls-utils-2.8.5-4.el6_2.2.i686.rpm x86_64: 48f7b95cb3496922467547cbb3d2a4e547f250b602985ef7dd5790956582f78a gnutls-2.8.5-4.el6_2.2.i686.rpm 44d7c2fbad1faf39fd012a788a23958e7253cc106abc1304d70c040b8bf8c14e gnutls-2.8.5-4.el6_2.2.x86_64.rpm bef0935cff152981f318197938f891956f0e0ebb92a439c46d627ee16a3bb76e gnutls-devel-2.8.5-4.el6_2.2.i686.rpm df49a24a696fac7b5e25d37a870cdb8a36aeab8f9b5d2daec1e46df26204cfab gnutls-devel-2.8.5-4.el6_2.2.x86_64.rpm 1bb962aaecc312f730457547160ba2459548105834a8e1b4de528a6514f4e669 gnutls-guile-2.8.5-4.el6_2.2.i686.rpm d66b77e580ba94e349402ed3d14493904268ca59fce6884c85621c6abd2c1032 gnutls-guile-2.8.5-4.el6_2.2.x86_64.rpm dfbbd4b9f4c28452c27dc0b436596280c06425a6eb14ba4012295baf927954c1 gnutls-utils-2.8.5-4.el6_2.2.x86_64.rpm Source: c4e991a53925e177d618e11c5132d5eac81589022ba71881db71b46623e42768 gnutls-2.8.5-4.el6_2.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 7 Date: Wed, 28 Mar 2012 12:43:00 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0432 CentOS 5 ksh Update To: centos-announce(a)centos.org Message-ID: <20120328124300.GA3498(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0432 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0432.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: f5bc1068ce3443f947efea28709440d93756fcdb276939c50cad6eabe47eeec9 ksh-20100621-5.el5_8.1.i386.rpm x86_64: 7cc93331e3088fb6c0ea84683e33a623c3355f1643a074140dc27bbc8f1998ea ksh-20100621-5.el5_8.1.x86_64.rpm Source: ea56377805242c3f40193b218b9e7192c136d49ff223812e02b5eb3a3fa2a5dd ksh-20100621-5.el5_8.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 8 Date: Wed, 28 Mar 2012 13:18:57 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0430 CentOS 6 curl Update To: centos-announce(a)centos.org Message-ID: <20120328131857.GA5118(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0430 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0430.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 6de73d59cdd6149e7b85d11a6682ea232aa0c767194388cff3c0031e7c576613 curl-7.19.7-26.el6_2.4.i686.rpm 32bc889cc1c5b1d51c6451ea86873721e17b437b985bbcd4703b5aa97562c557 libcurl-7.19.7-26.el6_2.4.i686.rpm 05d53e55d992e73a4667eb1ca952fa4dd25429bf84b0c1bf708bd5c4d5505893 libcurl-devel-7.19.7-26.el6_2.4.i686.rpm x86_64: 0daa38d812db1b31da8c69893c2035c6ebf7082e456b0389f3af5703b346b469 curl-7.19.7-26.el6_2.4.x86_64.rpm 32bc889cc1c5b1d51c6451ea86873721e17b437b985bbcd4703b5aa97562c557 libcurl-7.19.7-26.el6_2.4.i686.rpm 38b7449c126892a5a750727e9480dfecf4929aecbc3f99d1b4041a15ad06bd47 libcurl-7.19.7-26.el6_2.4.x86_64.rpm 05d53e55d992e73a4667eb1ca952fa4dd25429bf84b0c1bf708bd5c4d5505893 libcurl-devel-7.19.7-26.el6_2.4.i686.rpm 9a438b999d6cf3977973d9311245568d30a4d29d8a0272f27cb86cbc8e274304 libcurl-devel-7.19.7-26.el6_2.4.x86_64.rpm Source: 69b10f39ef1ebe1b77cda1eecaf5dd095c10b3bf98ec68b425de8d5aaff100d0 curl-7.19.7-26.el6_2.4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 9 Date: Wed, 28 Mar 2012 13:19:27 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2012:0431 CentOS 6 libssh2 Update To: centos-announce(a)centos.org Message-ID: <20120328131927.GA5204(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2012:0431 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-0431.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 7d30ec5fe040834ef937fa5a42d1a7b1616ae3a75c88f5999a57cc0fe602b2ba libssh2-1.2.2-7.el6_2.3.i686.rpm e92b9e69895ad4b1163d196a324351b21d96394fe22120a0375226f07d4603a6 libssh2-devel-1.2.2-7.el6_2.3.i686.rpm cad9c8769fb46397c12153cc3216ff6bb36f9426114ae82e9157d6362430759d libssh2-docs-1.2.2-7.el6_2.3.i686.rpm x86_64: 7d30ec5fe040834ef937fa5a42d1a7b1616ae3a75c88f5999a57cc0fe602b2ba libssh2-1.2.2-7.el6_2.3.i686.rpm eeef313b39f1d0e46f102bebcfcc73aa86db9466aaa4802989aefdde1f664851 libssh2-1.2.2-7.el6_2.3.x86_64.rpm e92b9e69895ad4b1163d196a324351b21d96394fe22120a0375226f07d4603a6 libssh2-devel-1.2.2-7.el6_2.3.i686.rpm b3cd55280f23c5bd0c0ba4117e2b87917ca813c43f105da0b4d1074387fd07c7 libssh2-devel-1.2.2-7.el6_2.3.x86_64.rpm 1430b6fa7ba116ae854c8b31ba439afef44dabc8a10ef2f955fc977b211a9c68 libssh2-docs-1.2.2-7.el6_2.3.x86_64.rpm Source: f92cb109e96d70182bcaa694f56eb4850bab64c9320e9b238b387af9b0c6cbf5 libssh2-1.2.2-7.el6_2.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 85, Issue 14 ***********************************************

1 0

[SOLVED] Re: Postfix problems with maximum messages size
by James B. Byrne 28 Mar '12

28 Mar '12

On Wed, March 28, 2012 09:44, James B. Byrne wrote: > CentOS-6.2 > > I am confused. Yes, yes I am. I was looking at the wrong server. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3 -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

5.8, t-bird 10 and firefox 10
by m.roth＠5-cent.us 28 Mar '12

28 Mar '12

Here's a problem I have at home - I updated to 5.8, have t-bird 10 and ff 10; I run icewm. However, I cannot get a link in an email to open in my browser. Anyone else see this? mark

5 9

Odd hang on a 5.6 system
by Ken Smith 27 Mar '12

27 Mar '12

Hi All, I've been trying to trace the cause of a hang on a 5.6 i386 system. After running for almost a year, it hung last week, when I plugged in a screen it was blank, machine was unresponsive to the keyboard, over the network ssh and other daemons didn't respond but the thing has two network cards and routing from one to the other was still working. So the kernel was up and I suspected a dying disk. But smartctl -a revealed nothing untoward. Didn't see anything significant in the log files at the time. Logging had stopped when the machine hung. The machine rebooted normally and has run for almost a week and hung again with the same symptoms. Again rebooted, nothing untoward in the logs and smartctl still OK. But shortly after I left site this was logged in /var/log/messages Mar 27 16:52:04 cjcsrv kernel: INFO: task hald-addon-stor:2179 blocked for more than 120 seconds. Mar 27 16:52:04 cjcsrv kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Mar 27 16:52:04 cjcsrv kernel: hald-addon-st D 00000197 2552 2179 2160 2170 (NOTLB) Mar 27 16:52:04 cjcsrv kernel: d895bbbc 00000086 a3374d80 00000197 e89436f0 d895bbbc c084e894 0000000a Mar 27 16:52:04 cjcsrv kernel: d891aaa0 a3468fc0 00000197 000f4240 00000000 d891abac c1506800 e43383c0 Mar 27 16:52:04 cjcsrv kernel: 00000000 00000086 00000000 e7ad2b80 c061f7ca 00000000 c1506844 d895bc0c Mar 27 16:52:04 cjcsrv kernel: Call Trace: Mar 27 16:52:04 cjcsrv kernel: [<e89436f0>] cdrom_do_pc_continuation+0x0/0x2c [ide_cd] Mar 27 16:52:04 cjcsrv kernel: [<c061f7ca>] schedule+0x9c6/0xa4f Mar 27 16:52:04 cjcsrv kernel: [<c061f905>] wait_for_completion+0x6b/0x8f Mar 27 16:52:04 cjcsrv kernel: [<c041f80f>] default_wake_function+0x0/0xc Mar 27 16:52:04 cjcsrv kernel: [<c0575b1b>] ide_do_drive_cmd+0xd7/0xfa Mar 27 16:52:04 cjcsrv kernel: [<e894071c>] cdrom_queue_packet_command+0x35/0xbc [ide_cd] Mar 27 16:52:05 cjcsrv kernel: [<c0488406>] poll_freewait+0x18/0x4c Mar 27 16:52:05 cjcsrv kernel: [<c048874e>] do_sys_poll+0x314/0x339 Mar 27 16:52:05 cjcsrv kernel: [<e8940c16>] cdrom_check_status+0x52/0x5d [ide_cd] Mar 27 16:52:05 cjcsrv kernel: [<c04e29ee>] blk_end_sync_rq+0x0/0x1d Mar 27 16:52:05 cjcsrv kernel: [<e8940c3b>] ide_cdrom_check_media_change_real+0x1a/0x34 [ide_cd] Mar 27 16:52:05 cjcsrv kernel: [<e88da06e>] media_changed+0x40/0x6e [cdrom] Mar 27 16:52:05 cjcsrv kernel: [<c047de20>] check_disk_change+0x13/0x3b Mar 27 16:52:05 cjcsrv kernel: [<e88ddfe4>] cdrom_open+0x833/0x876 [cdrom] Mar 27 16:52:05 cjcsrv kernel: [<c04c95c3>] avc_has_perm+0x3c/0x46 Mar 27 16:52:05 cjcsrv kernel: [<c04c95c3>] avc_has_perm+0x3c/0x46 Mar 27 16:52:05 cjcsrv kernel: [<c048c42f>] __d_lookup+0x98/0xdb Mar 27 16:52:05 cjcsrv kernel: [<c04c95c3>] avc_has_perm+0x3c/0x46 Mar 27 16:52:05 cjcsrv kernel: [<c04c9c29>] inode_has_perm+0x54/0x5c Mar 27 16:52:05 cjcsrv kernel: [<c04eef8a>] kobject_get+0xf/0x13 Mar 27 16:52:05 cjcsrv kernel: [<c04e5e51>] get_disk+0x35/0x6e Mar 27 16:52:05 cjcsrv kernel: [<c04e5e91>] exact_lock+0x7/0xd Mar 27 16:52:05 cjcsrv kernel: [<c056291d>] kobj_lookup+0x10d/0x168 Mar 27 16:52:05 cjcsrv kernel: [<e8941042>] idecd_open+0x7b/0xa8 [ide_cd] Mar 27 16:52:05 cjcsrv kernel: [<c047e448>] do_open+0x89/0x2cc Mar 27 16:52:05 cjcsrv kernel: [<c047e7f7>] blkdev_open+0x0/0x44 Mar 27 16:52:05 cjcsrv kernel: [<c047e813>] blkdev_open+0x1c/0x44 Mar 27 16:52:05 cjcsrv kernel: [<c0475937>] __dentry_open+0xc7/0x1ab Mar 27 16:52:05 cjcsrv kernel: [<c0475a7f>] nameidata_to_filp+0x19/0x28 Mar 27 16:52:05 cjcsrv kernel: [<c0475ab9>] do_filp_open+0x2b/0x31 Mar 27 16:52:05 cjcsrv kernel: [<c0475afd>] do_sys_open+0x3e/0xae Mar 27 16:52:05 cjcsrv kernel: [<c0475b9a>] sys_open+0x16/0x18 Mar 27 16:52:05 cjcsrv kernel: [<c0404f4b>] syscall_call+0x7/0xb Mar 27 16:52:05 cjcsrv kernel: ======================= Mar 27 16:52:19 cjcsrv kernel: ide1: reset timed-out, status=0xd0 ide1 has a CD attached. Not essential, the CD could be unplugged. ide0 has the hard disk, hda, attached. Looking back through the logs there is another of these recorded before the previous hang. Any clues as to what this is telling me - other than something crashed. Thanks Ken -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

2 1

Faster and faster
by Piero 27 Mar '12

27 Mar '12

Hi Centos Team, I was here the hard days in which CentOS 6 appeared would never appear, and then was CentOS 5.6 (maybe 5.7...do not remember well) that struggled to see the light and I was very afraid CentOS would not survive... but as I was worried in the past actually I'm very impressed of the speed of latest releases: what has changed? Just out of curiosity... Thanks for your hard work and great product, Bye Piero -- Stupid is as stupid does. Forrest Gump

5 4

How get a spec preprocesed with all macros expanded.
by Marcos Lois Bermúdez 27 Mar '12

27 Mar '12

Hi, I need to get a spec file with all macro exanded, so i can extract info of some tags, that my be consitional based on macros, i know that some rpm utils need to make this to figure out dependencies and so on. I don't know if is posible to get a preprocesed spec file with actual Centos & rpm tools, if this is on librpm, i can make a simple tool to make this. Regards.

2 3

kernel autoconfigure ?
by admin lewis 27 Mar '12

27 Mar '12

Anyone know if there is a kernel autoconfigure tool to compile from source ? thanks luigi -- Linux Server, Microsoft Windows 2003/2008 Server, Exchange 2007 http://predellino.blogspot.com/

5 5

INSTALLING UPDATES-PROXY PROBLEM
by arun kumar 27 Mar '12

27 Mar '12

Dear all I have centos 6.0 in my system and i want to update packages, so i tried the yum commands for checking and installing updates, but my proxy is objecting and i got the following error Loaded plugins: fastestmirror, refresh-packagekit Loading mirror speeds from cached hostfile Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=6&arch=i386&repo=os error was 14: PYCURL ERROR 22 - "The requested URL returned error: 407" Error: Cannot find a valid baseurl for repo: base i tried with the software update GUI in centos 6.0 but still the same proxy problem....can any one please suggest how to overcome this problem and install updates for packages. Thanking you. Regards -- Arun Kumar Somavarapu Project-JRF Dr. Prasanna's lab TMC, ACTREC Navi Mumbai-410210

5 12

Using NFSv3 and NFSv4 at the same time with CentOS6
by C. L. Martinez 27 Mar '12

27 Mar '12

Hi all, I have two centos6.2 servers acting as a nfs servers (nfsv3 for now). Due to some security requeriments, I need to share some folders using nfsv4 (with kerberos auth), but I have a doubt. Is it possible to serve shared folters using nfsv3 and nfsv4 (with kerberos auth) at the same time in the same server with centos6?? Nfsv3 is used to serve storage for three ESXi servers (and these ones only supports nfsv3). How can I do it?? Thanks.

1 0

Postfix master-slave configuration howto
by Ljubomir Ljubojevic 27 Mar '12

27 Mar '12

Hi guys. I have mail loop problem. I have master server (CentOS 5.x) for domain in question (lets call it *domainX.com* ). I used virtualmin to set it up for that and several other domains. It is Bind SOA for the domain and Postfix server. I will call this server *soa.domainX.com* Now, I have added internal CentOS 6.x server to the company owner of the domain. I have given it hostname *server.domainX.com* and created *user1* on it. It has Postfix server on it, without public IP, and has *soa.domainX.com* as relay server. What I need to learn is how to set up so mail for *root(a)server.domainX.com* and *user1(a)domainX.com* stay on the *server.domainX.com* and master Postfix on *soa.domainX.com* stops refusing mail for other domains with: "554 5.4.0 Error: too many hops (in reply to end of DATA command)" I am already searching the net, but would appreciate link to howto or hint what to look for, since I mostly find irrelevant hits. Thanks. -- Ljubomir Ljubojevic (Love is in the Air) PL Computers Serbia, Europe Google is the Mother, Google is the Father, and traceroute is your trusty Spiderman... StarOS, Mikrotik and CentOS/RHEL/Linux consultant

1 0

Script for enabling screen savers in GNOME and KDE on Centos 5.x
by ankush grover 27 Mar '12

27 Mar '12

Hi Friends, I am trying to configure screensavers settings on Gnome and KDE running Centos 5.x 32-bit environment. I need to prepare a script which will be push by Puppet and this script should be able to change settings like idle_delay, set customized password-protected screen saver, enabling lock etc.. I have tried below commands for Gnome and somehow the settings are not taking place. The users screensavers setting remains the same. Gnome Settings: gconftool-2 --direct --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory --type int --set /apps/gnome-screensaver/idle_delay 4 gconftool-2 --direct --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory --type boolean --set /apps/gnome-screensaver/lock_enabled true gconftool-2 --direct --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory --type boolean --set /apps/gnome-screensaver/idle_activation_enabled true gconftool-2 --direct --config-source xml:readwrite:/etc/gconf/gconf.xml.defaults --set --type list --list-type=string /apps/gnome-screensaver/themes [blank-only] On KDE I am not able to get what settings should be there for enabling idle_delay, activating the customized password protected screen saver etc.. KDE Settings $ qdbus org.freedesktop.ScreenSaver /ScreenSaver Do let me know whether any more information is required or not. Regards Ankush

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss