- Discuss - lists.centos.org

Re: [CentOS] Problems with Broadcom 4312 wireless
by David McGuffey 12 Jun '09

12 Jun '09

> > There are some possibly-related notes on this page in the wiki: > > http://wiki.centos.org/HowTos/Laptops/HP/Pavilion-ze5300_Series > > Short summary: neither bcm43xx nor ndiswrapper are a perfect solution, > and you may need to blacklist the bcm43xx driver to use ndiswrapper. > > That wiki entry was originally written for CentOS 5.0. I'm currently > running 5.3 with the supplied bcm43xx driver and it has some problems > with duplicate/dropped packets so the performance is suboptimal, but > it does work. > Yes, the bcm43xx driver is ugly. Finally got it to work last night by placing the AP in WEP Open Authentication. The driver won't work with WEP Shared Key, or WPA/WPA2 in any mode. And, there is a lot of packet loss. This won't do for a laptop that has to go back to college and hit a lot of APs that may be configured with WPA. Next step is to remove the bcm43xx driver and replace it with the more modern b43 driver from Broadcom. Here is some more info I captured last night: ////////////////////// A slice from /var/log/messages Jun 10 19:57:27 ErichLaptop kernel: bcm43xx: Radio hardware status changed to enabled Jun 10 19:57:47 ErichLaptop kernel: bcm43xx: set security called, .active_key = 0, .enabled = 1, .encrypt = 1 Jun 10 19:58:07 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 19:58:08 ErichLaptop kernel: bcm43xx: set security called, .active_key = 0, .enabled = 1, .encrypt = 1 Jun 10 19:58:12 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 19:58:40 ErichLaptop kernel: bcm43xx: set security called, .active_key = 0, .enabled = 1, .encrypt = 1 Jun 10 19:59:00 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 19:59:00 ErichLaptop kernel: bcm43xx: set security called, .active_key = 0, .enabled = 1, .encrypt = 1 Jun 10 19:59:04 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 19:59:11 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 19:59:27 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 19:59:27 ErichLaptop kernel: bcm43xx: Radio initialized Jun 10 19:59:27 ErichLaptop kernel: bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64 Jun 10 19:59:27 ErichLaptop kernel: bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512 Jun 10 19:59:27 ErichLaptop kernel: bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512 Jun 10 19:59:27 ErichLaptop kernel: bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512 Jun 10 19:59:27 ErichLaptop kernel: bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512 Jun 10 19:59:27 ErichLaptop kernel: bcm43xx: DMA-32 0x0220 (TX) max used slots: 2/512 Jun 10 19:59:27 ErichLaptop kernel: bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512 Jun 10 20:10:00 ErichLaptop kernel: bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27) Jun 10 20:10:00 ErichLaptop kernel: bcm43xx: Radio turned on Jun 10 20:10:00 ErichLaptop kernel: bcm43xx: Radio enabled by hardware Jun 10 20:10:01 ErichLaptop kernel: bcm43xx: Chip initialized Jun 10 20:10:01 ErichLaptop kernel: bcm43xx: 32-bit DMA initialized Jun 10 20:10:01 ErichLaptop kernel: bcm43xx: Keys cleared Jun 10 20:10:01 ErichLaptop kernel: bcm43xx: Selected 802.11 core (phytype 2) Jun 10 20:10:01 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 20:10:12 ErichLaptop kernel: bcm43xx: Radio initialized Jun 10 20:10:12 ErichLaptop kernel: bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64 Jun 10 20:10:12 ErichLaptop kernel: bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512 Jun 10 20:10:12 ErichLaptop kernel: bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512 Jun 10 20:10:12 ErichLaptop kernel: bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512 Jun 10 20:10:12 ErichLaptop kernel: bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512 Jun 10 20:10:12 ErichLaptop kernel: bcm43xx: DMA-32 0x0220 (TX) max used slots: 1/512 Jun 10 20:10:12 ErichLaptop kernel: bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512 Jun 10 20:12:05 ErichLaptop kernel: bcm43xx driver Jun 10 20:12:05 ErichLaptop kernel: bcm43xx: Chip ID 0x4311, rev 0x1 Jun 10 20:12:05 ErichLaptop kernel: bcm43xx: Number of cores: 4 Jun 10 20:12:05 ErichLaptop kernel: bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243 Jun 10 20:12:05 ErichLaptop kernel: bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243 Jun 10 20:12:05 ErichLaptop kernel: bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243 Jun 10 20:12:05 ErichLaptop kernel: bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243 Jun 10 20:12:05 ErichLaptop kernel: bcm43xx: PHY connected Jun 10 20:12:05 ErichLaptop kernel: bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8 Jun 10 20:12:05 ErichLaptop kernel: bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) Jun 10 20:12:05 ErichLaptop kernel: bcm43xx: Radio initialized Jun 10 20:12:05 ErichLaptop kernel: bcm43xx: Radio initialized Jun 10 20:12:16 ErichLaptop NetworkManager: <info> eth1: driver is 'bcm43xx'. Jun 10 20:12:20 ErichLaptop kernel: bcm43xx: PHY connected Jun 10 20:12:21 ErichLaptop kernel: bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27) Jun 10 20:12:21 ErichLaptop kernel: bcm43xx: Radio turned on Jun 10 20:12:21 ErichLaptop kernel: bcm43xx: Radio enabled by hardware Jun 10 20:12:22 ErichLaptop kernel: bcm43xx: Chip initialized Jun 10 20:12:22 ErichLaptop kernel: bcm43xx: 32-bit DMA initialized Jun 10 20:12:22 ErichLaptop kernel: bcm43xx: Keys cleared Jun 10 20:12:22 ErichLaptop kernel: bcm43xx: Selected 802.11 core (phytype 2) Jun 10 20:12:22 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 20:12:22 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 20:13:44 ErichLaptop kernel: bcm43xx: set security called, .active_key = 0, .enabled = 1, .encrypt = 1 Jun 10 20:14:04 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 20:14:04 ErichLaptop kernel: bcm43xx: set security called, .active_key = 0, .enabled = 1, .encrypt = 1 Jun 10 20:14:08 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 20:14:26 ErichLaptop kernel: bcm43xx: set security called, .active_key = 0, .enabled = 1, .encrypt = 1 Jun 10 20:14:46 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 20:14:47 ErichLaptop kernel: bcm43xx: set security called, .active_key = 0, .enabled = 1, .encrypt = 1 Jun 10 20:14:51 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0[root@ErichLaptop ~]# Jun 10 20:14:57 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 21:01:42 ErichLaptop kernel: bcm43xx: set security called, .active_key = 0, .enabled = 1, .encrypt = 1 Jun 10 21:02:02 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 21:02:02 ErichLaptop kernel: bcm43xx: set security called, .active_key = 0, .enabled = 1, .encrypt = 1 Jun 10 21:02:06 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 21:02:42 ErichLaptop kernel: bcm43xx: set security called, .active_key = 0, .enabled = 1, .encrypt = 1 Jun 10 21:03:02 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 21:03:02 ErichLaptop kernel: bcm43xx: set security called, .active_key = 0, .enabled = 1, .encrypt = 1 Jun 10 21:03:06 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 21:03:08 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 21:03:13 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 21:03:13 ErichLaptop kernel: bcm43xx: Radio initialized Jun 10 21:03:13 ErichLaptop kernel: bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64 Jun 10 21:03:13 ErichLaptop kernel: bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512 Jun 10 21:03:13 ErichLaptop kernel: bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512 Jun 10 21:03:13 ErichLaptop kernel: bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512 Jun 10 21:03:13 ErichLaptop kernel: bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512 Jun 10 21:03:13 ErichLaptop kernel: bcm43xx: DMA-32 0x0220 (TX) max used slots: 2/512 Jun 10 21:03:13 ErichLaptop kernel: bcm43xx: DMA-32 0x0200 (TX) max used slots: 0/512 ////////////////////// Pinging my Verizon FiOS provided firewall/switch/wireless gateway (note the packet loss) PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=12.8 ms 64 bytes from 192.168.1.1: icmp_seq=17 ttl=64 time=39.9 ms 64 bytes from 192.168.1.1: icmp_seq=20 ttl=64 time=33.5 ms 64 bytes from 192.168.1.1: icmp_seq=21 ttl=64 time=9.21 ms 64 bytes from 192.168.1.1: icmp_seq=22 ttl=64 time=9.41 ms 64 bytes from 192.168.1.1: icmp_seq=31 ttl=64 time=41.7 ms 64 bytes from 192.168.1.1: icmp_seq=37 ttl=64 time=50.6 ms 64 bytes from 192.168.1.1: icmp_seq=38 ttl=64 time=9.04 ms --- 192.168.1.1 ping statistics --- 41 packets transmitted, 8 received, 80% packet loss, time 40000ms rtt min/avg/max/mdev = 9.049/25.789/50.648/16.287 ms //////////////////////// >From lspci ... 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express (rev 02) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 01) //////////////////////// >From lspci -n ... 09:00.0 0200: 14e4:1673 (rev 02) 0c:00.0 0280: 14e4:4312 (rev 01)

1 0

Any problem of auto updating using yum?
by MontyRee 12 Jun '09

12 Jun '09

Hello, all. My systems are centos 4.x or 5.x(i386 and x86_64) and various services(apache, mysql, java, sendmail... etc..). and I would like to set auto update using yum. But some staffs didn't agree my auto update plan, because some services can be effected by auto update. There were no side effects just yum updating until now, and it seems impossible for me to check all packages whether side effects or not before updates. How about your opinions about this? Anyone who have experienced troubles by auto update? Is there any good way to solve this problem? Thanks in advance. _________________________________________________________________ 대딩들의 인맥관리! 윈도우 라이브 메신저로 해결하자! 채팅은 기본! 25GB 자료실은 덤! 대딩들의 아지트 윈메 클럽 http://im.msn.co.kr/Univ/

2 1

Re: [CentOS] Evolution Question?
by Jeff 12 Jun '09

12 Jun '09

Sorin Srbu wrote: >> -----Original Message----- >> From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On > Behalf >> Of Jeff >> Sent: Thursday, June 11, 2009 7:41 AM >> To: CentOS mailing list >> Subject: [CentOS] Evolution Question? >> >> I have a CentOS 5.3 Desktop and use Evolution to read mailing lists . >> When i move from one read letter to another(either deleting or clicking >> next the Message pane flickers. How can i stop this because it is hard >> on my eyes when i have a few emails to read? > > Increase the scan frequency of your monitor maybe? I've seen this in lists > generally with thousands of entries and the gfx-card can't keep up. Most > often upping the scan frequency solved this issue. I've also seen this on > computers that are a bit, ummm, underpowered. ;-) > > If you have an Nvidia gfx-card, try installing the proprietary drivers, or > (recommended) dkms and the dkms-Nvidia*-package. > > YMMV. > > > ------------------------------------------------------------------------ > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos Thanks for the reply. My card is a GeForce FX5200 is there an easy way to set it up as there seem to be a few options? Not sure how to increase scan frequency? is it dangerous?

2 1

Simple AD authentication for Samba share
by The Small Box Admin 12 Jun '09

12 Jun '09

I have a CentOS box that I'm basically using for file sharing with Samba. Currently I'm mapping the drive from an XP box with a Samba username/password combination. Is there a simple way to use AD or Windows authentication to allow the users to map the drive without having to use a separate username/password? That is without having to install LDAP and kerberos or whatever is needed to join the CentOS box to the AD. Thanks, Ken -- The Small Box Admin http://smallboxadmin.blogspot.com

2 1

router NAT problem
by Mintairov Mikhail 12 Jun '09

12 Jun '09

Hello All. I have a strange problem on my router. I use a xl2tpd program to establish a connection to the INTERNET. After I start xl2tpd it's create a new ppp0 device with correct ip parameters, also it's add some routes to the routing table and all this routes are correct too. After connection with provider are establish the router exec some simple iptables+NAT commands to give an INTERNET access to the LAN computers, and everything was working fine for a 2 or 3 years. But now but the local computers (192.168.127.0/24) con not establish a connection to some web sites or to some ftp servers. However, if I try to access to the same web sites from my router everything is good and it can access to every web or ftp server. First of all I recheck router table, and it's was correct. After it I rewrite my iptables rules (to create a simplest roles as can be) iptables -F iptables -F -t nat iptables -P FORWARD ACCEPT iptables -t nat -A POSTROUTING -o ppp0 -s 192.168.127.0/24 -j SNAT --to-source [my internet ip] And nothing good happen. I try to use tcpdump to understand the problem, and not found the answer. Because there was no errors. Every packet from 192.168.127.0 iface had correct routing to ppp0 iface and after it the SNAT change the packets source ip to [my internet ip]. So everything looks correct, but when I try to access to some sites from router and from 192.168.127.[some] computer the "tcpdump -n ppp0" output was not the same. Here the "tcpdump -i ppp0 -n" output of situation when I try to access to one of web site from my router ------------------------------------------------------------------------------------------------------- 01:13:23.293205 IP[my internet ip].34178 > 194.67.57.226.http: S 3824762316:3824762316(0) win 5680 <mss 1420,sackOK,timestamp 335559 0,nop,wscale 7> 01:13:23.309819 IP 194.67.57.226.http >[my internet ip].34178: S 715197421:715197421(0) ack 3824762317 win 5792 <mss 1460,sackOK,timestamp 3391122112 335559> 01:13:23.309874 IP[my internet ip].34178 > 194.67.57.226.http: . ack 1 win 5680 <nop,nop,timestamp 335563 3391122112> 01:13:23.310118 IP[my internet ip].34178 > 194.67.57.226.http: P 1:585(584) ack 1 win 5680 <nop,nop,timestamp 335563 3391122112> 01:13:23.320893 IP 194.67.57.226.http >[my internet ip].34178: . ack 585 win 6424 <nop,nop,timestamp 3391122128 335563> 01:13:23.336371 IP 194.67.57.226.http >[my internet ip].34178: . 1:1409(1408) ack 585 win 6424 <nop,nop,timestamp 3391122144 335563> 01:13:23.336412 IP[my internet ip].34178 > 194.67.57.226.http: . ack 1409 win 8448 <nop,nop,timestamp 335570 3391122144> 01:13:23.377324 IP 194.67.57.226.http >[my internet ip].34178: . 1409:2817(1408) ack 585 win 6424 <nop,nop,timestamp 3391122144 335563> .............................. and alot of same strings ------------------------------------------------------------------------------------------------------- And here the "tcpdump -i ppp0 -n" output of situation when I try to access to the same web site from 192.168.127.[some] computer. ------------------------------------------------------------------------------------------------------- 01:20:31.783723 IP[my internet ip].39044 > 194.67.57.20.http: S 3269053516:3269053516(0) win 5840 <mss 1460,sackOK,timestamp 12725586 0,nop,wscale 6> 01:20:31.794530 IP 194.67.57.20.http >[my internet ip].3 9044: S 2208770058:2208770058(0) ack 3269053517 win 5792 <mss 1460,sackOK,timestamp 568417946 12725586> 01:20:31.819422 IP[my internet ip].39044 > 194.67.57.20.http: . ack 1 win 5840 <nop,nop,timestamp 12725598 568417946> 01:20:33.281135 IP[my internet ip].39044 > 194.67.57.20.http: P 1:689(688) ack 1 win 5840 <nop,nop,timestamp 12727083 568417946> 01:20:33.291594 IP 194.67.57.20.http >[my internet ip].39044: . ack 689 win 6880 <nop,nop,timestamp 568419443 12727083> 01:20:46.431758 IP[my internet ip].39044 > 194.67.57.20.http: F 689:689(0) ack 1 win 5840 <nop,nop,timestamp 12740233 568419443> 01:20:46.481649 IP 194.67.57.20.http >[my internet ip].39044: . ack 690 win 6880 <nop,nop,timestamp 568432635 12740233> ------------------------------------------------------------------------------------------------------- As you can see the first 5 strings of those outputs are the same, but in the second situation there are no data transferring, and after 13 second of waiting the local computer send a FIN TCP packet (string number 6 in second listing). So, maybe someone can help me with understanding of this problem, because I don't have any ideas what can I do. I also know that router didn't have any hardware problem, because I have try to replace this router to another server and nothing has changed.

3 2

krb5kdc fails to start
by Hugh E Cruickshank 12 Jun '09

12 Jun '09

CentOS 4.7, Kerberos 1.3.4 Hi All: This is driving bonkers. A couple of weeks ago I started working on implementing Kerberos. I got as far as getting the primary/master KDC running on our CentOS development system before I got dragged off to work on something a little more pressing. I finally got back to it this week only to find that the krb5kdc service now fails to start. A check of the log files shows it has been working right up until the system was rebooted Sunday night. The reboot itself was not the problem as there had been previous reboots after which krb5kdc was able to restart. Here are the log entries for that latest retry: Jun 10 16:29:38 fisds0.forsoft.com krb5kdc[12490](info): setting up network... Jun 10 16:29:38 fisds0.forsoft.com krb5kdc[12490](info): setting up network... Jun 10 16:29:38 fisds0.forsoft.com krb5kdc[12490](info): skipping unrecognized local address family 17 Jun 10 16:29:38 fisds0.forsoft.com krb5kdc[12490](info): skipping unrecognized local address family 17 krb5kdc: Address already in use - Cannot bind server socket to port 750 address 192.168.2.8 krb5kdc: Address already in use - Cannot bind server socket to port 750 address 192.168.2.8 Jun 10 16:29:38 fisds0.forsoft.com krb5kdc[12490](info): set up 0 sockets Jun 10 16:29:38 fisds0.forsoft.com krb5kdc[12490](info): set up 0 sockets krb5kdc: no sockets set up? krb5kdc: no sockets set up? The "unrecognized local address family 17" message were occurring even when it worked so I do not thing they are significant to this problem. As far as I am aware I have not made any changes to the system that should affect this. I have done a ton of Google searches but I have not turned up anything that seem to help. Any thoughts or suggestions would be greatly appreciated. TIA Regards, Hugh -- Hugh E Cruickshank, Forward Software, www.forward-software.com

2 5

Re: [CentOS] How to reply to a digest
by David McGuffey 11 Jun '09

11 Jun '09

On Thu, 2009-06-11 at 12:00 -0400, centos-request(a)centos.org wrote: > Message: 45 > Date: Thu, 11 Jun 2009 13:48:25 +0200 > From: "M. Fioretti" <mfioretti(a)nexaima.net> 1. Subject: Re: [CentOS] How to reply to a digest > To: centos(a)centos.org > Message-ID: <20090611114825.GD2499(a)nexaima.net> > Content-Type: text/plain; charset=us-ascii > > On Thu, Jun 11, 2009 07:42:28 AM -0400, David McGuffey wrote: > > > So...what is the appropriate way to respond when one is receiving > > the digest version? > > It probably is to automatically split the digest into the original, > separate message as soon as it arrives, using procmail or > formail. Search for "procmail split digests" and you'll find > several explanations. > > This said, I really have to ask: do whatever you like as long as you > don't break threads but... why on Earth do you use digests? Are you > with an ISP which limits how many messages you can receive per day? > That's the only valid reasons I've ever read for digests in ~15 years > of email usage... > > Just curious, > Marco Fioretti I'll go back and see if I can change from digest to individual e-mail mode. Then use some Evolution rules to put the e-mails into a separate folder. Dave

1 0

Re: [CentOS] Problems with Broadcom 4312 wireless
by David McGuffey 11 Jun '09

11 Jun '09

On Thu, 2009-06-11 at 12:00 -0400, centos-request(a)centos.org wrote: > Message: 49 > Date: Thu, 11 Jun 2009 08:50:31 -0400 > From: Phil Schaffner <Philip.R.Schaffner(a)NASA.gov> > Subject: Re: [CentOS] Problems with Broadcom 4312 wireless > To: CentOS mailing list <centos(a)centos.org> > Message-ID: <4A30FD97.3060306(a)NASA.gov> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > David McGuffey wrote: ... > > Last problem is with the Broadcom 4312 wireless device. Again, did > some > > research and found two ways. One was the Broadcom provided Linux > > driver, and the other was the guidance on how to use fw-cutter from > > linuxwireless.com. > ... > > This forum thread may be useful: > http://www.centos.org/modules/newbb/viewtopic.php?topic_id=20640&forum=40 > > Although it is for a similar but different piece of Broadcom > hardware, > and does not come to a clean resolution, the key point seems to be: > ----------------------------------------------------------------------- > > Will you please now look at the output of a /sbin/lspci -n command > that > relates to your BCM4311 card. > > If the Vendor:Device ID pairing is one of the following -- > > 14E4:4301 > 14E4:4307 > 14E4:4311 > 14E4:4312 > 14E4:4318 > 14E4:4319 > 14E4:4320 > 14E4:4324 > 14E4:4325 > > > -- then the bcm43xx driver module present in the distributed CentOS > kernel will be appropriate for that card. In other words, there will > be > no need for you to use ndiswrapper. > ----------------------------------------------------------------------- Not using ndiswrapper. Output of lspci -n gives 14e4:4312 I believe I'm really close. After installing the firmware with fw-cutter, the load complaint about not finding bcm43xx-microcode5.fw went away. And...the device appears to attempt negotiation with the AP. Found another piece of guidance that the bcm43xx driver has problems with WEP and shared key...will try open authentication and WPA/WPA2 tonight. Dave

1 0

How to reply to a digest
by David McGuffey 11 Jun '09

11 Jun '09

I'm receiving the centos-request in digest mode. Using Fedora 10 and Evolution. When I tried to reply to a centos-request message inside the digest, the result doesn't seem to look right. I cut/paste the proper subject line (replacing the CentOS Digest, Vol NN, Issue nn text), but some have complained that this approach doesn't allow the original question and replies to be threaded. So...what is the appropriate way to respond when one is receiving the digest version? Dave

4 3

HELP SAMBA + LDAP
by Samir RHAOUSSI 11 Jun '09

11 Jun '09

Hello everybody, Please does some one have any "documentation", "tutorial", "how to" about setting up a PDC basing on Samba with a LDAP (OpenLDAP) backend ? I really need it for my studies end project thank you very very much for your help -- Samir RHAOUSSI ENIM 2009

4 3

OT: rebuild kmod rpm package from src.rpm
by carlopmart 11 Jun '09

11 Jun '09

Hi all, I would like to rebuild a kmod.src.rpm package for a specific kernel. When I try to do it, this message appears: Building target platforms: i686 Building for target i686 error: Failed build dependencies: kernel-xen-devel-i686 = 2.6.18-98.el5 is needed by mymodule-kmod-0.1.5-2.i686 kernel-PAE-devel-i686 = 2.6.18-98.el5 is needed by mymodule-kmod-0.1.5-2.i686. Is it possible to rebuild kmod.src.package only for certain kernel?? i don't need to rebuild this module for kernel-xen or kernel-PAE only for kernel-i686 ... Thanks. -- CL Martinez carlopmart {at} gmail {d0t} com

4 4

OT: Viewer for .docx M$ WORD files?
by Lanny Marcus 11 Jun '09

11 Jun '09

Is there a Viewer for .docx M$ WORD files? If so, where can I get it? This file type cannot be opened with OpenOffice.org 2.3. TIA!

9 27

Problems with Broadcom 4312 wireless
by David McGuffey 11 Jun '09

11 Jun '09

I'm migrating my son's Dell laptop from Vista to CentOS 5.3. He came back from each of his first two years of college loaded with virii and trojans. This year he said "Dad, can you give me Linux?" 5.3 went onto the laptop easily and after doing some research, I applied the guidance for getting multimedia working and got the nvidia driver loaded. That works great. Last problem is with the Broadcom 4312 wireless device. Again, did some research and found two ways. One was the Broadcom provided Linux driver, and the other was the guidance on how to use fw-cutter from linuxwireless.com. Had a problem getting the Broadcom driver to compile (failed with a "define TYPEDEF_BOOL" collision that I couldn't work out). Has been many a year since I last worked with C/C++, so I tried the other guidance to use fw-cutter. I now have partial success. The wireless device light comes on, and the device attempts to negotiate a connection with a wireless firewall/switch (I control). Need help figuring out why it is failing. Here is some output that might help: //////////////////// Some relevant lines from /var/log/messages: Jun 10 20:15:24 ErichLaptop NetworkManager: <info> Activation (eth0) starting connection 'System eth0' Jun 10 20:15:24 ErichLaptop NetworkManager: <info> (eth0): device state change: 3 -> 4 Jun 10 20:15:24 ErichLaptop NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled... Jun 10 20:15:24 ErichLaptop NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started... Jun 10 20:15:24 ErichLaptop NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled... Jun 10 20:15:24 ErichLaptop NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete. Jun 10 20:15:24 ErichLaptop NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting... Jun 10 20:15:24 ErichLaptop NetworkManager: <info> (eth0): device state change: 4 -> 5 Jun 10 20:15:24 ErichLaptop NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful. Jun 10 20:15:24 ErichLaptop NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled. Jun 10 20:15:24 ErichLaptop NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete. Jun 10 20:15:24 ErichLaptop NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started... Jun 10 20:15:24 ErichLaptop NetworkManager: <info> (eth0): device state change: 5 -> 7 Jun 10 20:15:24 ErichLaptop NetworkManager: <info> Activation (eth0) Beginning DHCP transaction. Jun 10 20:15:24 ErichLaptop dhclient: Internet Systems Consortium DHCP Client V3.0.5-RedHat Jun 10 20:15:24 ErichLaptop NetworkManager: <info> dhclient started with pid 3557 Jun 10 20:15:24 ErichLaptop dhclient: Copyright 2004-2006 Internet Systems Consortium. Jun 10 20:15:24 ErichLaptop NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete. Jun 10 20:15:24 ErichLaptop dhclient: All rights reserved. Jun 10 20:15:24 ErichLaptop dhclient: For info, please visit http://www.isc.org/sw/dhcp/ Jun 10 20:15:24 ErichLaptop dhclient: Jun 10 20:15:24 ErichLaptop NetworkManager: <info> DHCP: device eth0 state changed normal exit -> preinit Jun 10 20:15:24 ErichLaptop dhclient: Listening on LPF/eth0/00:21:70:78:41:51 Jun 10 20:15:24 ErichLaptop dhclient: Sending on LPF/eth0/00:21:70:78:41:51 Jun 10 20:15:24 ErichLaptop dhclient: Sending on Socket/fallback Jun 10 20:15:24 ErichLaptop dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 Jun 10 20:15:26 ErichLaptop dhclient: DHCPOFFER from 192.168.1.1 Jun 10 20:15:26 ErichLaptop dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67 Jun 10 20:15:26 ErichLaptop dhclient: DHCPACK from 192.168.1.1 Jun 10 20:15:26 ErichLaptop dhclient: bound to 192.168.1.6 -- renewal in 42971 seconds. Jun 10 20:15:26 ErichLaptop NetworkManager: <info> DHCP: device eth0 state changed preinit -> bound Jun 10 20:15:26 ErichLaptop NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP Configure Get) scheduled... Jun 10 20:15:26 ErichLaptop NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP Configure Get) started... Jun 10 20:15:26 ErichLaptop NetworkManager: <info> address 192.168.1.6 Jun 10 20:15:26 ErichLaptop NetworkManager: <info> prefix 24 (255.255.255.0) Jun 10 20:15:26 ErichLaptop NetworkManager: <info> gateway 192.168.1.1 Jun 10 20:15:26 ErichLaptop NetworkManager: <info> hostname 'ErichLap.mcguffeyfamily.net' Jun 10 20:15:26 ErichLaptop NetworkManager: <info> nameserver '192.168.1.1' Jun 10 20:15:26 ErichLaptop NetworkManager: <info> domain name 'mcguffeyfamily.net' Jun 10 20:15:26 ErichLaptop NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) scheduled... Jun 10 20:15:26 ErichLaptop NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP Configure Get) complete. Jun 10 20:15:26 ErichLaptop NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) started... Jun 10 20:15:26 ErichLaptop avahi-daemon[2948]: New relevant interface eth0.IPv4 for mDNS. Jun 10 20:15:26 ErichLaptop avahi-daemon[2948]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.1.6. Jun 10 20:15:26 ErichLaptop avahi-daemon[2948]: Registering new address record for 192.168.1.6 on eth0. Jun 10 20:15:27 ErichLaptop NetworkManager: <info> (eth0): device state change: 7 -> 8 Jun 10 20:15:27 ErichLaptop NetworkManager: <info> Policy set 'System eth0' (eth0) as default for routing and DNS. Jun 10 20:15:27 ErichLaptop NetworkManager: <info> Activation (eth0) successful, device activated. Jun 10 20:15:27 ErichLaptop NetworkManager: <info> Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete. Jun 10 20:15:51 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:17:21 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:18:51 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:20:21 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:21:51 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:23:21 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:24:51 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:26:21 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:27:51 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:29:21 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:30:51 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:32:21 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:33:51 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:35:21 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:36:51 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:38:21 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:39:51 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:41:21 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:42:51 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:44:21 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:45:51 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:47:21 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:48:51 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:50:21 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:51:51 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:53:21 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:54:51 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:56:21 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:57:51 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 20:59:21 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 21:00:51 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 21:01:41 ErichLaptop NetworkManager: <info> Activation (eth1) starting connection 'Auto Parker2510' Jun 10 21:01:41 ErichLaptop NetworkManager: <info> (eth1): device state change: 3 -> 4 Jun 10 21:01:41 ErichLaptop NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... Jun 10 21:01:41 ErichLaptop NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started... Jun 10 21:01:41 ErichLaptop NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... Jun 10 21:01:41 ErichLaptop NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete. Jun 10 21:01:41 ErichLaptop NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting... Jun 10 21:01:41 ErichLaptop NetworkManager: <info> (eth1): device state change: 4 -> 5 Jun 10 21:01:41 ErichLaptop NetworkManager: <info> Activation (eth1/wireless): access point 'Auto Parker2510' has security, but secrets are required. Jun 10 21:01:41 ErichLaptop NetworkManager: <info> (eth1): device state change: 5 -> 6 Jun 10 21:01:41 ErichLaptop NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete. Jun 10 21:01:41 ErichLaptop NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... Jun 10 21:01:41 ErichLaptop NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started... Jun 10 21:01:41 ErichLaptop NetworkManager: <info> (eth1): device state change: 6 -> 4 Jun 10 21:01:41 ErichLaptop NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... Jun 10 21:01:41 ErichLaptop NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete. Jun 10 21:01:41 ErichLaptop NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting... Jun 10 21:01:41 ErichLaptop NetworkManager: <info> (eth1): device state change: 4 -> 5 Jun 10 21:01:41 ErichLaptop NetworkManager: <info> Activation (eth1/wireless): connection 'Auto Parker2510' has security, and secrets exist. No new secrets needed. Jun 10 21:01:41 ErichLaptop NetworkManager: <info> Config: added 'ssid' value 'Parker2510' Jun 10 21:01:41 ErichLaptop NetworkManager: <info> Config: added 'scan_ssid' value '1' Jun 10 21:01:41 ErichLaptop NetworkManager: <info> Config: added 'key_mgmt' value 'NONE' Jun 10 21:01:41 ErichLaptop NetworkManager: <info> Config: added 'auth_alg' value 'OPEN' Jun 10 21:01:41 ErichLaptop NetworkManager: <info> Config: added 'wep_key0' value '<omitted>' Jun 10 21:01:41 ErichLaptop NetworkManager: <info> Config: added 'wep_tx_keyidx' value '0' Jun 10 21:01:41 ErichLaptop NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete. Jun 10 21:01:41 ErichLaptop NetworkManager: <info> Config: set interface ap_scan to 1 Jun 10 21:01:41 ErichLaptop NetworkManager: <info> (eth1): supplicant connection state: scanning -> disconnected Jun 10 21:01:41 ErichLaptop NetworkManager: <info> (eth1): supplicant connection state: disconnected -> scanning Jun 10 21:01:42 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 21:01:42 ErichLaptop kernel: bcm43xx: set security called, .active_key = 0, .enabled = 1, .encrypt = 1 Jun 10 21:01:42 ErichLaptop NetworkManager: <info> (eth1): supplicant connection state: scanning -> associating Jun 10 21:01:42 ErichLaptop kernel: SoftMAC: Already associating or associated to 00:18:01:e0:50:32 Jun 10 21:01:56 ErichLaptop NetworkManager: <info> eth1: link timed out. Jun 10 21:02:02 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 21:02:02 ErichLaptop last message repeated 3 times Jun 10 21:02:02 ErichLaptop NetworkManager: <info> (eth1): supplicant connection state: associating -> disconnected Jun 10 21:02:02 ErichLaptop NetworkManager: <info> (eth1): supplicant connection state: disconnected -> scanning Jun 10 21:02:02 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 21:02:02 ErichLaptop kernel: bcm43xx: set security called, .active_key = 0, .enabled = 1, .encrypt = 1 Jun 10 21:02:02 ErichLaptop NetworkManager: <info> (eth1): supplicant connection state: scanning -> associating Jun 10 21:02:02 ErichLaptop kernel: SoftMAC: Already associating or associated to 00:18:01:e0:50:32 Jun 10 21:02:06 ErichLaptop NetworkManager: <info> Activation (eth1/wireless): association took too long. Jun 10 21:02:06 ErichLaptop NetworkManager: <info> (eth1): device state change: 5 -> 6 Jun 10 21:02:06 ErichLaptop NetworkManager: <info> Activation (eth1/wireless): asking for new secrets Jun 10 21:02:06 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 21:02:06 ErichLaptop last message repeated 3 times Jun 10 21:02:06 ErichLaptop NetworkManager: <info> (eth1): supplicant connection state: associating -> disconnected Jun 10 21:02:21 ErichLaptop NetworkManager: <info> (eth1): supplicant connection state: disconnected -> scanning Jun 10 21:02:21 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 21:02:21 ErichLaptop NetworkManager: <info> eth1: link timed out. Jun 10 21:02:22 ErichLaptop NetworkManager: <info> (eth1): supplicant connection state: scanning -> disconnected Jun 10 21:02:37 ErichLaptop NetworkManager: <info> eth1: link timed out. Jun 10 21:02:41 ErichLaptop NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... Jun 10 21:02:41 ErichLaptop NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started... Jun 10 21:02:41 ErichLaptop NetworkManager: <info> (eth1): device state change: 6 -> 4 Jun 10 21:02:41 ErichLaptop NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... Jun 10 21:02:41 ErichLaptop NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete. Jun 10 21:02:41 ErichLaptop NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting... Jun 10 21:02:41 Erich////////////////////Laptop NetworkManager: <info> (eth1): device state change: 4 -> 5 Jun 10 21:02:41 ErichLaptop NetworkManager: <info> Activation (eth1/wireless): connection 'Auto Parker2510' has security, and secrets exist. No new secrets needed. Jun 10 21:02:41 ErichLaptop NetworkManager: <info> Config: added 'ssid' value 'Parker2510' Jun 10 21:02:41 ErichLaptop NetworkManager: <info> Config: added 'scan_ssid' value '1' Jun 10 21:02:41 ErichLaptop NetworkManager: <info> Config: added 'key_mgmt' value 'NONE' Jun 10 21:02:41 ErichLaptop NetworkManager: <info> Config: added 'auth_alg' value 'SHARED' Jun 10 21:02:41 ErichLaptop NetworkManager: <info> Config: added 'wep_key0' value '<omitted>' Jun 10 21:02:41 ErichLaptop NetworkManager: <info> Config: added 'wep_tx_keyidx' value '0' Jun 10 21:02:41 ErichLaptop NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete. Jun 10 21:02:41 ErichLaptop NetworkManager: <info> Config: set interface ap_scan to 1 Jun 10 21:02:41 ErichLaptop NetworkManager: <info> (eth1): supplicant connection state: disconnected -> scanning Jun 10 21:02:41 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 21:02:41 ErichLaptop NetworkManager: <info> (eth1): supplicant connection state: scanning -> associating Jun 10 21:02:42 ErichLaptop kernel: bcm43xx: set security called, .active_key = 0, .enabled = 1, .encrypt = 1 Jun 10 21:02:42 ErichLaptop kernel: SoftMAC: Already associating or associated to 00:18:01:e0:50:32 Jun 10 21:03:02 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .e////////////////////ncrypt = 0 Jun 10 21:03:02 ErichLaptop last message repeated 3 times Jun 10 21:03:02 ErichLaptop NetworkManager: <info> (eth1): supplicant connection state: associating -> disconnected Jun 10 21:03:02 ErichLaptop NetworkManager: <info> (eth1): supplicant connection state: disconnected -> scanning Jun 10 21:03:02 ErichLaptop kernel: SoftMAC: Scanning finished: scanned 13 channels starting with channel 1 Jun 10 21:03:02 ErichLaptop kernel: bcm43xx: set security called, .active_key = 0, .enabled = 1, .encrypt = 1 Jun 10 21:03:02 ErichLaptop kernel: SoftMAC: Already associating or associated to 00:18:01:e0:50:32 Jun 10 21:03:02 ErichLaptop NetworkManager: <info> (eth1): supplicant connection state: scanning -> associating Jun 10 21:03:06 ErichLaptop NetworkManager: <info> Activation (eth1/wireless): association took too long. Jun 10 21:03:06 ErichLaptop NetworkManager: <info> (eth1): device state change: 5 -> 6 Jun 10 21:03:06 ErichLaptop NetworkManager: <info> Activation (eth1/wireless): asking for new secrets Jun 10 21:03:06 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 21:03:06 ErichLaptop last message repeated 3 times Jun 10 21:03:06 ErichLaptop NetworkManager: <info> (eth1): supplicant connection state: associating -> disconnected Jun 10 21:03:08 ErichLaptop NetworkManager: <WARN> get_secrets_cb(): Couldn't get connection secrets: applet-device-wifi.c.1548 (get_secrets_dialog_response_cb): canceled. Jun 10 21:03:08 ErichLaptop NetworkManager: <info> (eth1): device state change: 6 -> 9 Jun 10 21:03:08 ErichLaptop NetworkManager: <info> Activation (eth1) failed for access point (Parker2510) Jun 10 21:03:08 ErichLaptop NetworkManager: <info> Marking connection 'Auto Parker2510' invalid. Jun 10 21:03:08 ErichLaptop NetworkManager: <info> Activation (eth1) failed. Jun 10 21:03:08 ErichLaptop NetworkManager: <info> (eth1): device state change: 9 -> 3 Jun 10 21:03:08 ErichLaptop NetworkManager: <info> (eth1): deactivating device (reason: 0). Jun 10 21:03:08 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 21:03:08 ErichLaptop kernel: SoftMAC: Queueing Authentication Request to 00:18:01:e0:50:32 Jun 10 21:03:08 ErichLaptop kernel: SoftMAC: Cannot associate without being authenticated, requested authentication Jun 10 21:03:08 ErichLaptop kernel: SoftMAC: Sent Authentication Request to 00:18:01:e0:50:32. Jun 10 21:03:08 ErichLaptop NetworkManager: <info> Policy set 'System eth0' (eth0) as default for routing and DNS. Jun 10 21:03:13 ErichLaptop NetworkManager: <info> (eth1): device state change: 3 -> 2 Jun 10 21:03:13 ErichLaptop NetworkManager: <info> (eth1): deactivating device (reason: 0). Jun 10 21:03:13 ErichLaptop kernel: bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 Jun 10 21:03:13 ErichLaptop kernel: SoftMAC: Already requested authentication, waiting... //////////////////// Output from lspci: 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 140M (rev a1) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express (rev 02) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 01) //////////////////// Output from lsmod: Module Size Used by testmgr_cipher 6849 0 testmgr 44593 1 testmgr_cipher aead 11841 1 testmgr crypto_blkcipher 17601 1 testmgr crypto_algapi 22849 3 testmgr,aead,crypto_blkcipher arc4 6209 0 ieee80211_crypt_wep 9153 0 udf 78949 1 autofs4 24261 2 hidp 23105 2 rfcomm 42457 0 l2cap 29505 10 hidp,rfcomm sunrpc 144765 1 ip_conntrack_netbios_ns 6977 0 ipt_REJECT 9537 1 xt_state 6209 2 ip_conntrack 52897 2 ip_conntrack_netbios_ns,xt_state nfnetlink 10713 1 ip_conntrack iptable_filter 7105 1 ip_tables 17029 1 iptable_filter ip6t_REJECT 9409 1 xt_tcpudp 7105 10 ip6table_filter 6849 1 ip6_tables 18053 1 ip6table_filter x_tables 17349 6 ipt_REJECT,xt_state,ip_tables,ip6t_REJECT,xt_tcpudp,ip6_tables cpufreq_ondemand 12493 1 acpi_cpufreq 13897 2 dm_mirror 23877 0 dm_multipath 24013 0 scsi_dh 11713 1 dm_multipath video 21193 0 hwmon 7365 0 backlight 10049 1 video sbs 18533 0 i2c_ec 9025 1 sbs button 10705 0 battery 13637 0 asus_acpi 19289 0 ac 9157 0 ipv6 261473 17 ip6t_REJECT xfrm_nalgo 13381 1 ipv6 crypto_api 12609 5 testmgr,aead,crypto_blkcipher,crypto_algapi,xfrm_nalgo parport_pc 29157 0 lp 15849 0 parport 37513 2 parport_pc,lp sg 36189 0 snd_hda_intel 343537 1 snd_seq_dummy 7877 0 snd_seq_oss 32577 0 snd_seq_midi_event 11073 1 snd_seq_oss snd_seq 49585 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 11725 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_pcm_oss 42817 0 snd_mixer_oss 19009 1 snd_pcm_oss snd_pcm 72133 2 snd_hda_intel,snd_pcm_oss nvidia 9548356 31 joydev 13313 0 ide_cd 40161 1 snd_timer 24517 2 snd_seq,snd_pcm bcm43xx 415585 0 snd_page_alloc 14281 2 snd_hda_intel,snd_pcm ieee80211softmac 33729 1 bcm43xx snd_hwdep 12869 1 snd_hda_intel i2c_i801 11725 0 cdrom 36577 1 ide_cd snd 55237 11 snd_hda_intel,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep ieee80211 34313 2 bcm43xx,ieee80211softmac tg3 113733 0 i2c_core 23745 3 i2c_ec,nvidia,i2c_i801 soundcore 11553 1 snd hci_usb 20317 0 ieee80211_crypt 10049 2 ieee80211_crypt_wep,ieee80211 libphy 21569 1 tg3 pcspkr 7105 0 serio_raw 10693 0 bluetooth 53797 6 hidp,rfcomm,l2cap,hci_usb dm_raid45 66509 0 dm_message 6977 1 dm_raid45 dm_region_hash 15681 1 dm_raid45 dm_log 14529 3 dm_mirror,dm_raid45,dm_region_hash dm_mod 62201 4 dm_mirror,dm_multipath,dm_raid45,dm_log dm_mem_cache 9537 1 dm_raid45 ata_piix 23621 6 libata 156677 1 ata_piix sd_mod 25153 7 scsi_mod 141589 4 scsi_dh,sg,libata,sd_mod ext3 124361 5 jbd 56937 1 ext3 uhci_hcd 25421 0 ohci_hcd 24681 0 ehci_hcd 33357 0

3 2

Re: [CentOS] OT: Windows Vista Tablet PC linux alternative
by Tosh 11 Jun '09

11 Jun '09

Sorin Srbu wrote: >> -----Original Message----- >> From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On > Behalf >> Of Karanbir Singh >> Sent: Thursday, June 11, 2009 2:04 PM >> To: CentOS mailing list >> Subject: Re: [CentOS] OT: Windows Vista Tablet PC linux alternative >> >>> Would any of you guys know of some kind of linux-based alternative, >>> preferrably available on or for CentOS, that can do the same >>> hand-writing-on-screen-tricks as Vista Tablet does? >> cellwriter and xournal are what I've been using for a few years now on >> my tc4400, no idea what the windows s/w does, but these two do all that >> I need with the tablet > > Windows Tablet allows for using handwriting on screen and entering it more > or less automatically to eg Word. > > Thanks for the hints, I'll those up. The mentioned software by Karanbir : cellwriter, write letter by letter and convert this to text (like the old palm input) xournal, is a good replacement for onenote, but doesn't have the conversion handwriting to text one more thing, if you install CentOS, you will need to add your stylus manually to /etc/X11/xorg.conf, for more info go to http://www.thinkwiki.org/wiki/Wacom_Serial_Tablet_PC_Stylus worked for my Toshiba Portégé M400 -- Toshaan <toshlinux(a)gmail.com> - http://www.toshaan.be

2 1

problems accessing: http://apt.sw.be/
by Marcelo M. Garcia 11 Jun '09

11 Jun '09

Hi Anyone else having problems to access http://apt.sw.be/ Regards mg.

3 3

Re: [CentOS] OT: Windows Vista Tablet PC linux alternative
by Karanbir Singh 11 Jun '09

11 Jun '09

On 06/11/2009 12:09 PM, Sorin Srbu wrote: > Would any of you guys know of some kind of linux-based alternative, > preferrably available on or for CentOS, that can do the same > hand-writing-on-screen-tricks as Vista Tablet does? cellwriter and xournal are what I've been using for a few years now on my tc4400, no idea what the windows s/w does, but these two do all that I need with the tablet -- Karanbir Singh : http://www.karan.org/ : 2522219@icq

2 1

Re: [CentOS] Tracking updates
by Per Qvindesland 11 Jun '09

11 Jun '09

Hi Ocsinventory http://www.ocsinventory-ng.org/ might be considered if not then I could also recommend Spacewalk http://www.redhat.com/spacewalk/ for something like this both runs well on Centos Per E-mail: per(a)norhex.com [1] http://www.linkedin.com/in/perqvindesland [2] --- Original message follows --- SUBJECT: [CentOS] Tracking updates FROM: Martin Spinassi TO: "CentOS mailing list" DATE: 10-06-2009 17:45 Hi all, I don't know if exists what I'm searching for, or just making the wrong questions to google. I'm searching some kind of tracking system to software updates. If one server is administrated by more than 2 persons, having control of what updates have been installed, and what version of that application is running after the update. Making manual documentation is ok for one server, but doing this for several servers is a big amount of time, and relies on the admin to have the time to do so, but automating this would be great. I someone doing something to have track of the updates? Any recommendation? Cheers, Martín _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos Links: ------ [1] http://webmail.norhex.com/# [2] http://www.linkedin.com/in/perqvindesland

2 1

Bind krb5kdc only to eth1 and not also to ppp0
by Olaf Mueller 11 Jun '09

11 Jun '09

Hello, if starting /etc/init.d/krb5kdc, kerberos binds to eth1 and the *current* ip of ppp0. # netstat -nap | grep :750\\b udp 0 0 91.9.220.166:750 0.0.0.0:* 3180/krb5kdc udp 0 0 192.168.0.1:750 0.0.0.0:* 3180/krb5kdc # netstat -nap | grep :88\\b tcp 0 0 0.0.0.0:88 0.0.0.0:* LISTEN 3180/krb5kdc udp 0 0 91.9.220.166:88 0.0.0.0:* 3180/krb5kdc udp 0 0 192.168.0.1:88 0.0.0.0:* 3180/krb5kdc Since my internet provider changes the address of ppp0 for every 24 hours and since the last start of /etc/init.d/krb5kdc was 10 days ago (with the last reboot of my server), kerberos still binds to the old ip of ppp0. How can I force krb5kdc to bind *only* to my local address 192.168.0.1 (eth1) and not to bind also to the current ip of ppp0? Thank you! regards Olaf

1 0

External SATA enclosures: SiI3124 and CentOS 5?
by Benjamin Smith 11 Jun '09

11 Jun '09

Tired of "little problems" trying to keep 7 drives working in an old desktop computer, I'm considering an external SATA drive enclosure with a controller card based on the Sil3124. http://www.ipcdirect.net/servlet/Detail?no=152 I'm a bit concerned about long-term support, namely that the company's driver page only lists drivers through RedHat 4. http://www.siliconimage.com/support/searchresults.aspx?pid=27&cat=3 Does anybody else have experience with this controller? How has it been for you? If you have experience with an external SATA enclosure(s), what did you use and how did it work for you? Thanks, Ben -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

4 3

OT: Windows Vista Tablet PC linux alternative
by Sorin Srbu 11 Jun '09

11 Jun '09

Hi all, I have this tabletpc one of my bosses insisted on buying. The machine runs Windows Vista TabletPC Edition. As it happens I have a thousand and one problems with this POS operating system... I think the hardware is fine though, so it's not that. Would any of you guys know of some kind of linux-based alternative, preferrably available on or for CentOS, that can do the same hand-writing-on-screen-tricks as Vista Tablet does? Please excuse this off-topic post, but the frustration with Vista runs high over here right now. 8-/ Mail me privately if you feel this shouldn't be discussed on-list but want to hint me anyway. Thanks. -- BW, Sorin ----------------------------------------------------------- # Sorin Srbu [Sysadmin, Systems Engineer] # Dept of Medicinal Chemistry, Phone: +46 (0)18-4714482 >3 signals> GSM # Div of Org Pharm Chem, Mobile: +46 (0)701-718023 # Box 574, Uppsala University, Fax: +46 (0)18-4714482 # SE-751 23 Uppsala, Sweden Visit: BMC, Husargatan 3, D5:512b # Web: http://www.orgfarm.uu.se ----------------------------------------------------------- # () ASCII ribbon campaign - Against html E-mail # /\ # # MotD follows: # Geeky it-haiku #09: Wasting time/Is fun while others/Slave away.

1 0

yum --allow-downgrade and versionlocking not working
by Kai Schaetzl 11 Jun '09

11 Jun '09

with installed version 1.3.7 from rpmforge yum --allow-downgrade update rrdtool-1.2.30-1.el5.rf results in "no packages to update" yum --allow-downgrade install rrdtool-1.2.30-1.el5.rf says "already installed" So, how am I supposed to use --allow-downgrade then? I had to rpm -e --nodeps the newer packages to be able to install the older packages. Now I want to lock the package version. However, again, yum doesn't work as I read from documentation. After adding rrdtool-1.2.30-1.el5.rf perl-rrdtool-1.2.30-1.el5.rf to versionlock.list I get: Error: Package tuple ('rrdtool', 'i386', '0', '1.3.7', '1.el5.rf') could not be found in packagesack where I can't find any fix for. Interestingly, I'm also getting this error on a simple "yum update", that I haven't seen before: Error: Package tuple ('perl-DBD-mysql', 'i386', '0', '4.011', '1.el5.rf') could not be found in packagesack This package was removed quite some time ago the same way because downgrading didn't work. (This package wrongly obsoletes a base package.) What's going on here? Even yum clean all doesn't help. Kai -- Kai Schätzl, Berlin, Germany Get your web at Conactive Internet Services: http://www.conactive.com

2 2

munin stopped working
by Kai Schaetzl 11 Jun '09

11 Jun '09

Just noticed that my munin installation stopped showing any data after the last "big" update. I installed a lot of updates for CentoS, but there was also a munin update coming from rpmforge. However, in yum.log there is no munin listed. But I'm sure I updated munin to 1.2.5-2.el5.rf as well. Does yum log only the centos repo's? The problem seems to be with the creation of the graphs. When running munin-cron manually I get this output: No fonts found; this probably means that the fontconfig library is not correctly configured. You may need to edit the fonts.conf configuration file. More information about fontconfig can be found in the fontconfig(3) manual page and on http://fontconfig.org I don't know at all what I should do. Is anyone else running munin and hit and solved the same problem? Kai -- Kai Schätzl, Berlin, Germany Get your web at Conactive Internet Services: http://www.conactive.com

3 4

Evolution Question?
by Jeff 11 Jun '09

11 Jun '09

I have a CentOS 5.3 Desktop and use Evolution to read mailing lists . When i move from one read letter to another(either deleting or clicking next the Message pane flickers. How can i stop this because it is hard on my eyes when i have a few emails to read? Jeff

2 1

grep/sed help
by Joseph L. Casale 10 Jun '09

10 Jun '09

I am rsyncing and remotely doing some work based on a logfile from a windows box from a centos backup server. I get the output from a vss snapshot that has a section like this: * SNAPSHOT ID = {639ef5df-c933-4496-878a-ed57b9d52876} ... - Shadow copy Set: {427ac5db-21be-4c53-8ca4-24e7bac86a1d} - Original count of shadow copies = 2 - Original Volume name: \\?\Volume{787bdf7a-ccff-11dd-9866-806e6f6e6963}\ [D:\] - Creation Time: 6/10/2009 12:12:08 PM - Shadow copy device name: \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy11 - Originating machine: milano.example.local - Service machine: milano.example.local - Not Exposed - Provider id: {b5946137-7b9f-4925-af80-51abd60b20d5} - Attributes: No_Auto_Release Persistent Differential * SNAPSHOT ID = {fb5996cf-a35b-4110-b83c-45f9c64a75f3} ... - Shadow copy Set: {427ac5db-21be-4c53-8ca4-24e7bac86a1d} - Original count of shadow copies = 2 - Original Volume name: \\?\Volume{787bdf7b-ccff-11dd-9866-806e6f6e6963}\ [E:\] - Creation Time: 6/10/2009 12:12:08 PM - Shadow copy device name: \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy12 - Originating machine: milano.example.local - Service machine: milano.example.local - Not Exposed - Provider id: {b5946137-7b9f-4925-af80-51abd60b20d5} - Attributes: No_Auto_Release Persistent Differential My current script only uses sed/grep but I never had to deal with this case where now I need to do something based on the grep'ed/sed extraction of the value of "SNAPSHOT ID" based on volume name "D:" or "E:"? To make my script work without rewriting it, is there a sed method to only take the "SNAPSHOT ID" if the text indented beneath it has "D:", then do the same and extract "SNAPSHOT ID" if and only if "E:" follows? Thanks for any help! jlc

4 3

Automounter (?) failing in CentOS 5.3
by MHR 10 Jun '09

10 Jun '09

I may have asked about this before, but I can't find any records of so doing in my saved mail (which includes almost everything I ever read or write): All of a sudden, I am not getting flash drives automatically mounted in CentOS 5.3 with GNOME - they are recognized by the hardware, but there seems to be a (new?) problem with the maps. Here's the tail end of dmesg: usb 1-10: new high speed USB device using ehci_hcd and address 68 usb 1-10: configuration #1 chosen from 1 choice scsi53 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 68 usb-storage: waiting for device to settle before scanning Vendor: SanDisk Model: Cruzer Rev: 4.05 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sdd: 8001165 512-byte hdwr sectors (4097 MB) sdd: Write Protect is off sdd: Mode Sense: 03 00 00 00 sdd: assuming drive cache: write through SCSI device sdd: 8001165 512-byte hdwr sectors (4097 MB) sdd: Write Protect is off sdd: Mode Sense: 03 00 00 00 sdd: assuming drive cache: write through sdd: sdd1 sd 53:0:0:0: Attached scsi removable disk sdd sd 53:0:0:0: Attached scsi generic sg3 type 0 usb-storage: device scan complete usb 1-10: USB disconnect, address 68 usb 1-9: new high speed USB device using ehci_hcd and address 69 usb 1-9: configuration #1 chosen from 1 choice scsi54 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 69 usb-storage: waiting for device to settle before scanning Vendor: SanDisk Model: Cruzer Rev: 4.05 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sdd: 8001165 512-byte hdwr sectors (4097 MB) sdd: Write Protect is off sdd: Mode Sense: 03 00 00 00 sdd: assuming drive cache: write through SCSI device sdd: 8001165 512-byte hdwr sectors (4097 MB) sdd: Write Protect is off sdd: Mode Sense: 03 00 00 00 sdd: assuming drive cache: write through sdd: sdd1 sd 54:0:0:0: Attached scsi removable disk sdd sd 54:0:0:0: Attached scsi generic sg3 type 0 usb-storage: device scan complete And here's the tail end of /var/log/messages: Jun 9 14:42:33 mhrichter kernel: usb 1-10: new high speed USB device using ehci_hcd and address 68 Jun 9 14:42:33 mhrichter kernel: usb 1-10: configuration #1 chosen from 1 choice Jun 9 14:42:33 mhrichter kernel: scsi53 : SCSI emulation for USB Mass Storage devices Jun 9 14:42:38 mhrichter kernel: Vendor: SanDisk Model: Cruzer Rev: 4.05 Jun 9 14:42:38 mhrichter kernel: Type: Direct-Access ANSI SCSI revision: 02 Jun 9 14:42:38 mhrichter kernel: SCSI device sdd: 8001165 512-byte hdwr sectors (4097 MB) Jun 9 14:42:38 mhrichter kernel: sdd: Write Protect is off Jun 9 14:42:38 mhrichter kernel: sdd: assuming drive cache: write through Jun 9 14:42:38 mhrichter kernel: SCSI device sdd: 8001165 512-byte hdwr sectors (4097 MB) Jun 9 14:42:38 mhrichter kernel: sdd: Write Protect is off Jun 9 14:42:38 mhrichter kernel: sdd: assuming drive cache: write through Jun 9 14:42:38 mhrichter kernel: sdd: sdd1 Jun 9 14:42:38 mhrichter kernel: sd 53:0:0:0: Attached scsi removable disk sdd Jun 9 14:42:38 mhrichter kernel: sd 53:0:0:0: Attached scsi generic sg3 type 0 Jun 9 14:43:04 mhrichter kernel: usb 1-10: USB disconnect, address 68 Jun 9 14:43:12 mhrichter kernel: usb 1-9: new high speed USB device using ehci_hcd and address 69 Jun 9 14:43:12 mhrichter kernel: usb 1-9: configuration #1 chosen from 1 choice Jun 9 14:43:12 mhrichter kernel: scsi54 : SCSI emulation for USB Mass Storage devices Jun 9 14:43:17 mhrichter kernel: Vendor: SanDisk Model: Cruzer Rev: 4.05 Jun 9 14:43:17 mhrichter kernel: Type: Direct-Access ANSI SCSI revision: 02 Jun 9 14:43:17 mhrichter kernel: SCSI device sdd: 8001165 512-byte hdwr sectors (4097 MB) Jun 9 14:43:17 mhrichter kernel: sdd: Write Protect is off Jun 9 14:43:17 mhrichter kernel: sdd: assuming drive cache: write through Jun 9 14:43:17 mhrichter kernel: SCSI device sdd: 8001165 512-byte hdwr sectors (4097 MB) Jun 9 14:43:17 mhrichter kernel: sdd: Write Protect is off Jun 9 14:43:17 mhrichter kernel: sdd: assuming drive cache: write through Jun 9 14:43:17 mhrichter kernel: sdd: sdd1 Jun 9 14:43:17 mhrichter kernel: sd 54:0:0:0: Attached scsi removable disk sdd Jun 9 14:43:17 mhrichter kernel: sd 54:0:0:0: Attached scsi generic sg3 type 0 Jun 9 14:50:18 mhrichter kernel: usb 1-9: USB disconnect, address 69 These two particular mount attempts/expectations are with a flash drive that I've been using for months without any trouble at all, and I _can_ mount it manually with 'mount.' (However, I cannot mount it, or the other flash drives that also have worked flawlessly for months, with gnome-mount, which used to work as long as the device was visible. I can look at the partition tables on all three drives with fdisk -l, but no automount to /media/<whatever>.) How do I fix this? Thanks mhr

3 6

Things that fail over time (was Automounter (?) failing in CentOS 5.3)
by MHR 10 Jun '09

10 Jun '09

I'm starting a new thread on this because there are other failures I'd like to bring up, not _necessarily_ directly related to CentOS, but they all happen to me here. FTR: Linux mhrichter 2.6.18-128.1.10.el5 #1 SMP Thu May 7 10:35:59 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux (AMD 64x2 7750, 2.7GHz, 2GB memory, 900+GB disk, etc.) I had a meeting to go to last night, so before I left, I rebooted. When I returned, as I expected, my USB flash drives were all properly recognized (i.e., the default behavior worked). I have a number of scripts and aliases that "depend" on certain flash drive cognizance, but they all depend on indeirect references, so by changing, eg., my symlink to my "main" flash drive, everything that "depends" on it works just fine. Of course, after the reboot, I had to restore the original symlink, but I digress. This particular failure might not actually have been time related, although it seems like it because once it "began" to fail, it always failed. I tried all my USB ports, moved some connections around, and only the flash drives continued to fail - my printers were fine (I had to reset the hardware connection values in System->Administration->Printers, but that's normal with a USB disconnect/reconnect anyway if the ports are different. I got onto this because I was using a USB extension cable for most of my connects with the flash drives, and I was seeing some strange behavior there, e.g., when I jiggled the flash drive, it would start acting as if it had been unplugged and replugged. I actually went through and tested all my USB ports, some with and without the extension cable, and I found one that just doesn't work at all (!), but the behavior was consistent, except that I haven't retested that extension cable yet - not sure I want to.... Another issue I'm seeing that is most clearly a time-related failure is with flash videos in SeaMonkey. I'm running: Mozilla/5.0 (X11; U; Linux i686 (x86_64); en-US; rv:1.9.1b3pre) Gecko/20090223 SeaMonkey/2.0a3 with most of the usual plugins, including the Adobe Shockwave Flash 10.0 r22 plugin. This is the i586 aka 32-bit version. I tried using the 64-bit version, which I _think_ I got from rpmforge, but it just doesn't work right, and it can't be installed simultaneously with the 32-bit version. (I'm also using nspluginwrapper, of course, which is really nice.) The problem is that, after some indeterminate period of time, usually overnight, the flash videos stop working properly. They either load for about 2 seconds and hang, or they play for 10-30 seconds with no sound, then a burst of high-speed "catch-up" sound, then either nothing or the echoes of the last fragment of sound, and so on. Frequently, even when I close the offending tab, the sound takes up to a minute or two to stop its echoes. The only solution I've found is to close SM altogether and restart it. Then, all is well. I realize that a) this isn't a CentOS issue per se, and b) I'm using the 2.0 alpha test pre-release version of SM. However, I have found, through bitter experience and regret, that the standard release of SeaMonkey 1.x is worse. Now, I know there are some who will say "Use Firefox," but, frankly, I really don't like the way too many of its "featuers" work, and I really, _really_, REALLY prefer (a mild word for it) the SeaMonkey/Netscape behaviors. I should also note that it doesn't matter how many flash videos I play that work, 0 or 1 or a dozen, once I hit that one that doesn't, it's close all tabs and restart. It's annoying, even when I just close the thing SM and let its semi-automatic re-open all tabs on restart, because usually that doesn't reestablish existing logins (it's kind of intermittent there), and I am usually logged into Yahoo and Gmail all the time. There are also other failures I've seen that I can dimly recall and that I thought at the time were time-related, and, miraculously! a reboot solved them all, at least until the next time. I don't remember any of the specifics of those, and I haven't adopted the practice of making notes on ALL of them yet, but it's just my (primary) desktop, and I haven't seen anything remotely catastrophic in those areas. Yet. So what? I was wondering if anyone else had any thoughts on issues of this nature (time-related failures). Thanks. mhr

1 0

truecrypt & kernel 2.6.24
by Rudi Ahlers 10 Jun '09

10 Jun '09

Hi all, Has anyone used TrueCrypt on a XEN based machine before? I'm running CentOS 5.3 with kernel 2.6.18 but when I launch TrueCrypt, it keeps on telling me I need kernel 2.6.24 or later. "Your system uses an old version of the Linux Kernel. Due to a bug in the Linux Kernel, your system may stop responding when writing data to a TrueCrypt volume. This problem can be solved by upgrading the kernel version to 2.6.24 or later" Now, the CentOS repositories doesn't have 2.6.24, so do I have to build the kernel manually? And will there be any problems when doing so? I like to just run "yum update" when needed. Here's the output from the machine: Linux zaxen02.lan 2.6.18-92.1.18.el5xen #1 SMP Wed Nov 12 09:48:10 EST 2008 x86_64 x86_64 x86_64 GNU/Linux -- Kind Regards Rudi Ahlers CEO, SoftDux Hosting Web: http://www.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532

2 2

Re: [CentOS] grep/sed help
by nate 10 Jun '09

10 Jun '09

Joseph L. Casale wrote: > if the text indented beneath it has "D:", then do the same and extract > "SNAPSHOT ID" if and only if "E:" follows? If the line counts are constant you could do the reverse: grep -B 3 "$E:\|D:$" input.txt | grep Shadow Which would show the 3 lines above a line that has E:\ or D:\ and then only display the lines with the word Shadow. nate

3 2

CentOS-announce Digest, Vol 52, Issue 5
by centos-announce-request＠centos.org 10 Jun '09

10 Jun '09

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2009:1082 Important CentOS 5 i386 cups Update (Karanbir Singh) 2. CESA-2009:1082 Important CentOS 5 x86_64 cups Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Wed, 10 Jun 2009 11:18:31 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2009:1082 Important CentOS 5 i386 cups Update To: centos-announce(a)centos.org Message-ID: <20090610111831.GA22645(a)tantra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2009:1082 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2009-1082.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 412dbf884ceca3ca3b38529b25980d29 cups-1.3.7-8.el5_3.6.i386.rpm 4757840de65b9df1a0f6a0b93c9e7182 cups-devel-1.3.7-8.el5_3.6.i386.rpm 330c9f2be9fb5e7c4fe76ccf483eb2d2 cups-libs-1.3.7-8.el5_3.6.i386.rpm 40f67f44015b95d834a5aa8c9a344f48 cups-lpd-1.3.7-8.el5_3.6.i386.rpm Source: c7dc4e4647872810fe1e468ff0e52c3a cups-1.3.7-8.el5_3.6.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 10 Jun 2009 11:18:31 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CESA-2009:1082 Important CentOS 5 x86_64 cups Update To: centos-announce(a)centos.org Message-ID: <20090610111831.GA22660(a)tantra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2009:1082 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2009-1082.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: f55a2cf629680f512c85fa50a4ffd3b2 cups-1.3.7-8.el5_3.6.x86_64.rpm ca3a859ba96c0338722c21acebb002f3 cups-devel-1.3.7-8.el5_3.6.i386.rpm 7655ae252529f97e44f15678b38677db cups-devel-1.3.7-8.el5_3.6.x86_64.rpm 66fd130ef78009d926fe280408feed92 cups-libs-1.3.7-8.el5_3.6.i386.rpm 7f634af75c9263d967bf9fd20683d3d9 cups-libs-1.3.7-8.el5_3.6.x86_64.rpm d1a6fcfce4fb0d0eea52d1e0ba796c41 cups-lpd-1.3.7-8.el5_3.6.x86_64.rpm Source: c7dc4e4647872810fe1e468ff0e52c3a cups-1.3.7-8.el5_3.6.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 52, Issue 5 **********************************************

1 0

Tracking updates
by Martin Spinassi 10 Jun '09

10 Jun '09

Hi all, I don't know if exists what I'm searching for, or just making the wrong questions to google. I'm searching some kind of tracking system to software updates. If one server is administrated by more than 2 persons, having control of what updates have been installed, and what version of that application is running after the update. Making manual documentation is ok for one server, but doing this for several servers is a big amount of time, and relies on the admin to have the time to do so, but automating this would be great. I someone doing something to have track of the updates? Any recommendation? Cheers, Martín

1 0

CentOS 5.3 cron / crontab missing?
by Rudi Ahlers 10 Jun '09

10 Jun '09

Hi On 6/10/09, James Bensley <jwbensley(a)gmail.com> Hi all, I don't know what exactly is causing this, but I can't find cron / crontab on my CentOS 5.3 machine. Yes, I know, it's an obvious one, install it. But, it is, according to rpm: [root@zaxen01 ~]# rpm -aq | grep cron anacron-2.3-45.el5.centos crontabs-1.10-8 I have tried yum update crontabs, and then it said there was no updates. yum update all also said there's no updates. Yet, when I run cron or crontab it doesn't work: [root@zaxen01 ~]# crontab -bash: crontab: command not found [root@zaxen01 ~]# which cron /usr/bin/which: no cron in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) [root@zaxen01 ~]# which crontab /usr/bin/which: no crontab in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin) [root@zaxen01 ~]# ll /etc/cron cron.d/ cron.hourly/ crontab cron.daily/ cron.monthly/ cron.weekly/ Am I missing something here? Any pointers on this would be appreciated :) _____________ Kind Regards Rudi Ahlers CEO, SoftDux Hosting Web: http://www.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532

3 3

Crontabs
by James Bensley 10 Jun '09

10 Jun '09

Hey list, I have several crontabs set up to run at night and I'm not convinced they are running but of course, I'm not here to see for sure! The crontabs are like the following example; 30 20 * * * sh /home/a_user/nightlyscrips/nightly_script_1 > /home/a_user/nightlyscripts/`date +%d-%m-%Y--%H-%M-%S`.log However, if this would have successfully ran last night I would surely expect to see 09-06-2009--20-30-00.log in the nightlyscripts directory? But its not there, this goes for all my cron jobs. I have three scripts running at different times in the night all echoing out to a log file like above so I can see how they did but a week after setting them up and no log files exist. The crontabs are running under root and if I copy the command and paste it in terminal and run that from root it runs fine? I set a cron tab up this morning just to see what happens; 35 08 * * * touch /home/a_user/test_file This worked fine, the file was created. Whats happening to my other cron tabs? How can I diagnose the problem? Any help is greatly appreciated. Thanks for reading! Regards, James ;) -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GIT/MU/U dpu s: a--> C++>$ U+> L++> B-> P+> E?> W+++>$ N K W++ O M++>$ V- PS+++ PE++ Y+ PGP t 5 X+ R- tv+ b+> DI D+++ G+ e(+++++) h--(++) r++ z++ ------END GEEK CODE BLOCK------

4 4

KDE and mounting CD's / DVD's without noexec
by Clint Dilks 10 Jun '09

10 Jun '09

Hi e, I am normally use gnome and would do the following to make my CD / DVD mount with exec gnome-mount --write-settings --device /dev/sdc0 -o exec What is the equivalent in KDE ? My initial research suggests that I actually have to write a custom udev rule to achieve this. This has led me as far as running udevinfo -q path -n /dev/scd0 udevtest /block/sr0 (the output is below) My question is which of these commands is actually doing the mount as all I want to change is the exec flag rather that how the device is labeled. main: looking at device '/block/sr0' from subsystem 'block' run_program: '/bin/bash -c '/sbin/lsmod | /bin/grep ^dm_multipath'' run_program: '/bin/bash' (stdout) 'dm_multipath 55257 0 ' run_program: '/bin/bash' returned with status 0 udev_rules_get_name: add symlink 'cdrom' udev_rules_get_name: add symlink 'cdrom-sr0' run_program: 'check-cdrom.sh sr0 DVD' run_program: '/lib/udev/check-cdrom.sh' returned with status 0 udev_rules_get_name: add symlink 'dvd' udev_rules_get_name: add symlink 'dvd-sr0' run_program: 'check-cdrom.sh sr0 CD-R' run_program: '/lib/udev/check-cdrom.sh' returned with status 0 udev_rules_get_name: add symlink 'cdwriter' udev_rules_get_name: add symlink 'cdwriter-sr0' udev_rules_get_name: add symlink 'cdrw' udev_rules_get_name: add symlink 'cdrw-sr0' run_program: 'check-cdrom.sh sr0 DVD-R' run_program: '/lib/udev/check-cdrom.sh' returned with status 0 udev_rules_get_name: add symlink 'dvdwriter' udev_rules_get_name: add symlink 'dvdwriter-sr0' udev_rules_get_name: add symlink 'dvdrw' udev_rules_get_name: add symlink 'dvdrw-sr0' udev_rules_get_name: rule applied, 'sr0' becomes 'scd0' run_program: '/lib/udev/usb_id -x' run_program: '/lib/udev/usb_id' returned with status 1 run_program: '/lib/udev/scsi_id -g -x -s /block/sr0 -d /dev/.tmp-11-0' run_program: '/lib/udev/scsi_id' returned with status 1 run_program: '/lib/udev/scsi_id -g -x -a -s /block/sr0 -d /dev/.tmp-11-0' run_program: '/lib/udev/scsi_id' (stdout) 'ID_VENDOR=TSSTcorp' run_program: '/lib/udev/scsi_id' (stdout) 'ID_MODEL=DVD+-RW_TS-H653F' run_program: '/lib/udev/scsi_id' (stdout) 'ID_REVISION=D200' run_program: '/lib/udev/scsi_id' (stdout) 'ID_SERIAL=' run_program: '/lib/udev/scsi_id' (stdout) 'ID_TYPE=cd' run_program: '/lib/udev/scsi_id' (stdout) 'ID_BUS=scsi' run_program: '/lib/udev/scsi_id' returned with status 0 run_program: '/lib/udev/path_id /block/sr0' run_program: '/lib/udev/path_id' (stdout) 'ID_PATH=pci-0000:00:1f.2-scsi-1:0:0:0' run_program: '/lib/udev/path_id' returned with status 0 udev_rules_get_name: add symlink 'disk/by-path/pci-0000:00:1f.2-scsi-1:0:0:0' udev_device_event: device '/block/sr0' already in database, validate currently present symlinks udev_node_add: creating device node '/dev/scd0', major = '11', minor = '0', mode = '0640', uid = '0', gid = '6' udev_node_add: creating symlink '/dev/cdrom' to 'scd0' udev_node_add: creating symlink '/dev/cdrom-sr0' to 'scd0' udev_node_add: creating symlink '/dev/dvd' to 'scd0' udev_node_add: creating symlink '/dev/dvd-sr0' to 'scd0' udev_node_add: creating symlink '/dev/cdwriter' to 'scd0' udev_node_add: creating symlink '/dev/cdwriter-sr0' to 'scd0' udev_node_add: creating symlink '/dev/cdrw' to 'scd0' udev_node_add: creating symlink '/dev/cdrw-sr0' to 'scd0' udev_node_add: creating symlink '/dev/dvdwriter' to 'scd0' udev_node_add: creating symlink '/dev/dvdwriter-sr0' to 'scd0' udev_node_add: creating symlink '/dev/dvdrw' to 'scd0' udev_node_add: creating symlink '/dev/dvdrw-sr0' to 'scd0' udev_node_add: creating symlink '/dev/disk/by-path/pci-0000:00:1f.2-scsi-1:0:0:0' to '../../scd0' main: run: '/sbin/multipath -v0 11:0' main: run: 'socket:/org/kernel/udev/monitor' main: run: '/lib/udev/udev_run_devd' main: run: 'socket:/org/freedesktop/hal/udev_event' main: run: '/sbin/pam_console_apply /dev/scd0 /dev/cdrom /dev/cdrom-sr0 /dev/dvd /dev/dvd-sr0 /dev/cdwriter /dev/cdwriter-sr0 /dev/cdrw /dev/cdrw-sr0 /dev/dvdwriter /dev/dvdwriter-sr0 /dev/dvdrw /dev/dvdrw-sr0 /dev/disk/by-path/pci-0000:00:1f.2-scsi-1:0:0:0'

1 0

PPPoE/ADSL configuration questions.
by Bill Campbell 10 Jun '09

10 Jun '09

I am building a CentOS 5 box to ship to Houston which will be a gateway system on an SBC DSL connection for a while until the client gets a T1 installed. I have read up on using adsl-setup and related software, but never done PPPoE on anything but LinkSys commodity boxes. I have examined the adsl-setup script, and I think I understand how this works, but want to be sure I understand things first. The box has dual 10/100/1000 NICs, eth0 for the internal LAN, and eth1 for the PPPoE interface, and later the T1. After running the adsl-setup script, answering the prompts, it appears that it will create an ifcfg-ppp0 interface which will take care of handling the eth1 interface. It also should handle default route setting when the system boots, and do the initial setting of the /etc/resolv.conf file. We will not be using the adsl package firewalling/NAT as we have our own procedures for this. This seems reasonably straightforward, but I know Murphy is always ready to pounce as soon as I assume anything. Is adsl-setup and its associated programs the best way to handle this on a CentOS box? I think that the WAN interface will appear as ppp0 when the system is running. When we move the system to the T1, is it sufficient to edit the ifcfg-ppp0 script setting ONBOOT=no, then do a normal configuration of eth1 using system-config-network? This is something I will have to talk somebody through over the phone unless it would work to connect the DSL modem and T1 router to a network hub/switch with eth1 so that I could configure eth1 while logged in via the DSL connection, the restart the networking to have it bring down the DSL connection, then bring up the T1. What am I forgetting? Thanks. Bill -- INTERNET: bill(a)celestial.com Bill Campbell; Celestial Software LLC URL: http://www.celestial.com/ PO Box 820; 6641 E. Mercer Way Voice: (206) 236-1676 Mercer Island, WA 98040-0820 Fax: (206) 232-9186 Skype: jwccsllc (206) 855-5792 Lord, the money we do spend on Government and it's not one bit better than the government we got for one third the money twenty years ago. Will Rogers

2 1

Re: [CentOS] Networking Issue
by Dave Jones 09 Jun '09

09 Jun '09

>Joseph L. Casale wrote: > >> Now it seems there is still one last hurdle, when the connection is yanked >> to simulate a complete outage, asterisk still goes down. I can only assume >> this happens now as a result of no default gateway? > >check the logs? run strace on the process? run tcpdump on >the interface(s) to see what traffic it is trying to transmit? > >> >> Would setting up a silly route for 0.0.0.0/0 to say 127.0.0.1 for the >> internal >> nic in /etc/sysconfig/network-scripts/route-eth1 with a metric higher than >> what the ISP's dhcp servers default gw would be possibly cure this? My hope >> is that when the wan nic goes down, a route is still available. > >Last I checked the 'metric' number in the linux routing table is >really only used when your using a routing daemon. as far as >default routes go, it should not have any impact. > >I suspect the route is not the issue, I suspect that the app is >trying to talk to something external and then fails, it will fail >the same if you try to point it to a router that goes nowhere. > >tcpdump should be able to tell you who the host is trying to talk >to. strace might reveal why. > >nate I have almost this same setup running with no problems. Make sure you have only one default gateway on your server defined on your Internet facing interface. This should be getting assigned from the DHCP request to your ISP so make sure you don't have a gateway in your internal interface. As far as Asterisk crashing, that sounds like application problem (like Nate said) trying to communicate over the connection that was pulled out. However, make sure it's listening on all interfaces (0.0.0.0), or just the internal static IP, so it's not specifically listening on the DHCP IP that could change or go away when the network cable is yanked. A local tcpdump or wireshark should shed some light on this problem if the above doesn't change anything. -- Dave Jones

2 1

GIMP 2.3.15 for EL5, no newer libs required
by Radu-Cristian FOTESCU 09 Jun '09

09 Jun '09

Folks, I've build a tiny repo to provide GIMP 2.3.15 (and 2.3.14 as a possible fallback) for EL5. GIMP 2.3.15 is the last version of GIMP that builds with no errors with the GTK+ version that ships with EL. 2.3.15 is "almost GIMP 2.4", as 2.3.19 was the last development release prior to 2.4.0. To the extent of my knowledge, Akkana Peck wrote the first edition of her book on GIMP 2.4 using a development edition 2.3.something, where "something" was not newer than 13. I therefore hope that most of the features and improvements brought by 2.4 over 2.2 are already present in 2.3.15 (or 2.3.14). These builds are obviously not as stable as 2.2.13, nor are they patched against bugs or newer vulnerabilities. I have adapted (from Mandriva's 2.3.14 as of 2007.1) the patches for CVE-2006-4519, CVE-2007-2949 and CVE-2007-3741. To get these builds (RPMs and SRPMs), use the repo file: http://odiecolon.lastdot.org/el5/odiecolon.repo The site is not browsable, because I can't make it so (Lucian, any help?). Still, the repo should work (it worked for me). A *few* more details here: http://beranger.org/v3/wordpress/?p=3325 Please test and report if it works for you or not -- I only use a limited set of features from what GIMP can do. Note that I have not tested any plugins, and I don't even know if xsane-gimp still works with this build. Disclaimer: You should never use this on a production system, or else all the kittens within a range of 2 miles might die. Thank you, R-C __________________________________________________________________ Looking for the perfect gift? Give the gift of Flickr! http://www.flickr.com/gift/

2 1

Public key for freetype-2.2.1-21.el5_3.i386.rpm is not installed
by Jay 09 Jun '09

09 Jun '09

Greetings Where can I the public key for freetype ? Thanks! -Jay

2 2

RealTek 8168B (Rev 02) Issue
by Ben Mohilef 09 Jun '09

09 Jun '09

The 8168B (02) NIC works well except that it does not go into promiscuous mode despite advertising itself in that mode after being so directed with ifconfig. Unfortunately, the little box is destined to be an IDS monitor, so that function is essential. The board is an Intel Atom 330 run as x86_64, the nic is internal. We tried three drivers: the one in the 2.6.18-128.1.10.el5 kernel yields a high count of dropped packets (known problem), and the drivers from Realtek and El Repo. None solve the promiscuous problem (although they fix the funny dropped counter issue). Apparently the chip has no MII capability either. Anyone have any idea as how to make this chip do the promiscuous mode thing other than adding another nic card ?

2 4

PAE or use 64-bit?
by Matt Arnilo S. Baluyos (Mailing Lists) 09 Jun '09

09 Jun '09

Hi all, Which would you recommend for a 4GB+ machine? A 32-bit install with PAE-enabled kernel or just use 64-bit? Regards, Matt -- Stand before it and there is no beginning. Follow it and there is no end. Stay with the ancient Tao, Move with the present.

6 6

Intel Graphics support in future releases
by Ron Blizzard 09 Jun '09

09 Jun '09

Since my computers use built-in Intel graphics chips (which work great with CentOS 5.3), I've been worrying about Ubuntu's (and other "cutting edge" distributions) problems with these. It appears to be an Xorg problem. What I don't understand is why Xorg would release something that only half worked with a large segment of the computers out there. I'm also wondering how Red Hat / CentOS will handle such a problem -- or have they already addressed it? Probably shouldn't worry about a "possible" problem, but I do anyhow. -- RonB -- Using CentOS 5.3

5 8

Building a custom install CD
by Fred Moyer 09 Jun '09

09 Jun '09

Greetings, I am looking for resources on how to build my own Centos install CD for a preselected package set that I want to install. I think Red Hat may have had this functionality at some point but it has been a while since I have needed to do this. I found this on how to build my own kernel - http://wiki.centos.org/HowTos/BuildingKernelModules - which I will need to exercise as well, but I want to build my own .iso that I can run a kickstart or similar mechanism from. Thanks in advance.

3 2

Re: [CentOS] Networking Issue
by nate 09 Jun '09

09 Jun '09

Joseph L. Casale wrote: > Now it seems there is still one last hurdle, when the connection is yanked > to simulate a complete outage, asterisk still goes down. I can only assume > this happens now as a result of no default gateway? check the logs? run strace on the process? run tcpdump on the interface(s) to see what traffic it is trying to transmit? > > Would setting up a silly route for 0.0.0.0/0 to say 127.0.0.1 for the > internal > nic in /etc/sysconfig/network-scripts/route-eth1 with a metric higher than > what the ISP's dhcp servers default gw would be possibly cure this? My hope > is that when the wan nic goes down, a route is still available. Last I checked the 'metric' number in the linux routing table is really only used when your using a routing daemon. as far as default routes go, it should not have any impact. I suspect the route is not the issue, I suspect that the app is trying to talk to something external and then fails, it will fail the same if you try to point it to a router that goes nowhere. tcpdump should be able to tell you who the host is trying to talk to. strace might reveal why. nate

1 0

Networking Issue
by Joseph L. Casale 09 Jun '09

09 Jun '09

Need some opinions on making a multihomed box more resilient to failure. This server runs asterisk and performs nat and firewalling for an office. Its wan nic is plugged directly into a cable modem and I am stuck with it being configured as a dhcp client. The lan nic services a small office, and has a static IP but of course, no default gateway. When an internet outage occurs, asterisks sip stack tanks and the pbx dives. So I have setup fqdn's/ip's in the hosts file for all sip peers it will attempt to resolve, and setup a local dns with all rfc1912 zones so every query asterisk can possibly make will be answered locally. Now it seems there is still one last hurdle, when the connection is yanked to simulate a complete outage, asterisk still goes down. I can only assume this happens now as a result of no default gateway? Would setting up a silly route for 0.0.0.0/0 to say 127.0.0.1 for the internal nic in /etc/sysconfig/network-scripts/route-eth1 with a metric higher than what the ISP's dhcp servers default gw would be possibly cure this? My hope is that when the wan nic goes down, a route is still available. I can't think of any other network shortcoming that is left when that external nic goes down, I am hoping this is finally it, so asterisk will stop core dumping and yelling "Serious Network Trouble". Thanks! jlc

1 0

Disabling IPv6 in CentOS 4.7
by Stephen Harris 08 Jun '09

08 Jun '09

I thought I'd done that standard stuff /etc/modprobe.conf: alias net-pf-10 off alias ipv6 off /etc/sysconfig/network: NETWORKING_IPV6=no But on reboot I still see ipv6 entries against the eth devices, ipv6 module is still loaded, and sit0 tunnel is present. What needs to be done to disable ipv6? -- rgds Stephen

3 3

Cannot get LD_LIBRARY_PATH to work under NX (freenx)
by Andrzej Szymanski 08 Jun '09

08 Jun '09

Hello, I'm trying to get the LD_LIBRARY_PATH set from .bash_profile (Centos 5.3 fully updated). This is a part of my .bash_profile: export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/home/szyman/omnet/omnetpp-2.3p1/lib export R_HISTSIZE=2000000000 Everything works fine under standard ssh login, but under NX client the LD_LIBRARY_PATH variable is missing (the R_HISTSIZE is exported properly). Any hints? Thanks, Andrzej

6 9

LZMA for CentOS 5.3 repository or source or rpm
by Rob Townley 08 Jun '09

08 Jun '09

i need lzma compression for CloneZilla, but have not found it in any CentOS repository. The Finnish website was down and when up, it does not do much english.

2 1

Basic setup for vsftpd ?
by Niki Kovacs 08 Jun '09

08 Jun '09

Hi, I'm currently fiddling with G4U (Ghost for Unix), and I need to setup a local FTP server in order to get it to work. # yum groupinstall "FTP Server" --> installed vsftpd Here's what I'd like to do : * no anonymous access * only one user (user 'install' / pass 'install') The machine I'm installing it on has a static IP ok (192.168.1.252/255.255.255.0). I tried to fiddle with the various configuration options in vsftpd.conf, but to no avail. Googled quite some, but the information I found doesn't seem reliable, more like contradictory. One detail: this isn't a publicly accessible machine, e. g. it's not out there on the wild internet, only on the LAN, so there's no special security considerations. Any suggestions ? Niki Kovacs

4 4

Re: [CentOS] libwpd/libwpd-devel deps screwed?
by Radu-Cristian FOTESCU 08 Jun '09

08 Jun '09

Oh, sorry, fixed it with rpm -iv --force libwpd-0.8.7-3.el5.i386.rpm rpm -iv --nodeps libwpd-devel-0.8.7-3.el5.i386.rpm I suppose the RPM database is too fragile by design. R-C __________________________________________________________________ Make your browsing faster, safer, and easier with the new Internet Explorer® 8. Optimized for Yahoo! Get it Now for Free! at http://downloads.yahoo.com/ca/internetexplorer/

2 1

please help: Linux Kernel must be loaded before initrd
by Rudi Ahlers 08 Jun '09

08 Jun '09

Hi, One of my servers in a IDC in another country mysteriously went down this morning, and when I contacted the IDC, I was told that XEN doesn't boot up, as follows: [QUOTE] This is error message on the screen " Error 19: Linux Kernel must be loaded before initrd" Server is currently up with 2nd kernel. Please check the grub.conf. [/QUOTE] Looking at grub.conf, I see the following: #boot=/dev/hda default=0 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.18-128.1.10.el5xen) root (hd0,0) kernel /xen.gz-2.6.18-128.1.10.el5 ro root=/dev/VolGroup00/LogVol01 ide0=noprobe ide1=noprobe initrd /initrd-2.6.18-128.1.10.el5.img title CentOS (2.6.18-128.1.10.el5) root (hd0,0) kernel /vmlinuz-2.6.18-128.1.10.el5 ro root=/dev/VolGroup00/LogVol01 ide0=noprobe ide1=noprobe initrd /initrd-2.6.18-128.1.10.el5.img title CentOS (2.6.18-128.el5) root (hd0,0) kernel /vmlinuz-2.6.18-128.el5 ro root=/dev/VolGroup00/LogVol01 ide0=noprobe ide1=noprobe initrd /initrd-2.6.18-128.el5.img Then on another server, I see the following in grub.conf: #boot=/dev/sda default=0 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.18-8.1.15.el5xen) root (hd0,0) kernel /xen.gz-2.6.18-8.1.15.el5 module /vmlinuz-2.6.18-8.1.15.el5xen ro root=/dev/VolGroup00/root module /initrd-2.6.18-8.1.15.el5xen.img title CentOS (2.6.18-8.1.15.el5) root (hd0,0) kernel /vmlinuz-2.6.18-8.1.15.el5 ro root=/dev/VolGroup00/root initrd /initrd-2.6.18-8.1.15.el5.img title CentOS (2.6.18-8.el5) root (hd0,0) kernel /vmlinuz-2.6.18-8.el5 ro root=/dev/VolGroup00/root initrd /initrd-2.6.18-8.el5.img On both kernels, I can see that initrd is loaded 2nd, as it should. So the error doesn't make sense. The BIG problem is that the server is on another continent, and their support is totally useless. I have actiall ordered a new server, from another IDC and got it last night, but need XEN to work on this server in order to move the domU's across. Can anyone see anyting wrong with this? Google has revelaed the obvious, that the initrd is incorrectly loaded, but according to the grub.conf that I have, it should be loading properly. -- Kind Regards Rudi Ahlers CEO, SoftDux Hosting Web: http://www.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532

2 1

Random server reboot after update to CentOS 5.3
by Peter Hopfgartner 08 Jun '09

08 Jun '09

Dear ML We upgraded a Dell Poweredge PE 1950 Server the 8th of May. Since then the server rebooted 3 times without external cause (it is located in a server farm with redundant power supply etc.). Looking at the servers monitoring infrastructure with Dell's own OpenManage tools, I get strange errors: [root@servernew ~]# omreport system esmlog (....) Severity : Critical Date and Time : Mon May 11 17:46:59 2009 Description : System Software event: run-time critical stop was asserted Severity : Critical Date and Time : Fri May 15 21:07:57 2009 Description : System Software event: run-time critical stop was asserted Severity : Critical Date and Time : Wed May 20 21:00:53 2009 Description : System Software event: run-time critical stop was asserted (...) This class of errors never happened before in over a year that the server is running. There is no mention of any anomaly, except the boot messages itself, in /var/log/messages. The server runs the 64 bit flavor of CentOS hosting some XEN virtual machines and some PostgreSQL and MySQL databases. It run without any issues with CentOS 5.1 and 5.2. I interpreted these issues as some kernel/software related problem, but do not know how to make a more accurate diagnosis of the problem. Can anybody give me some hint? Has anybody had some similar issue? Regards, Peter -- Dott. Peter Hopfgartner R3 GIS Srl - GmbH Via Johann Kravogl-Str. 2 I-39012 Meran/Merano (BZ) Email: peter.hopfgartner(a)r3-gis.com Tel. : +39 0473 494949 Fax : +39 0473 069902 www : http://www.r3-gis.com

12 21

Re: [CentOS] Server Build Example
by gene.poole＠macys.com 08 Jun '09

08 Jun '09

> Lucian(a)lastdot.org wrote: >> I'm no Oracle user/expert, but isn't Oracle DB 11g free (as in beer)? >> So my take is he's not paying anything. >> pierce(a)hogranch.com wrote: > AFAIK, its only free for your initial development work. As soon as you > deploy a production app, you have to get support, and as soon as you > have a support contract, you can no longer run any free instances, > except the lightweight 'express' version which is limited to very small > databases with only a few connections and doesn't have any of the > enterprise functions. Let me absolutely clear on this, when I say 'production' I'm speaking about my personal home network only. This network consists of a very few machines with very limited access to the outside world. I use it for my education and experience only. So production, to me, is a environment I don't want to update more than once a year. Thanks, Gene Poole

1 0

Question about dd (fill a hard disks' unused space with blanks)
by Niki Kovacs 08 Jun '09

08 Jun '09

Hi, I'm currently experimenting with G4U (Ghost for Unix), a small cloning application sending disk images to an FTP server. The application reads the whole disk bit by bit, compresses it and then stores it remotely. Due to this approach, it's more or less filesystem-independent. The drawback is that it sometimes results in huge image files. Now I'm currently following a hint which suggests to fill the disks' unused space with zero bits. Here's the command for that: # dd if=/dev/zero of=/0bits bs=20M # rm /0bits Now I gave that a shot, but after half an hour or so, I got a bit impatient. Now the computer does not respond any more. Does that mean he's just way too busy with dd? Or is there some mistake in the command? As I see it, it will just be chugging on and on, no? Shouldn't there be a 'count=x' option somewhere? Niki

8 19

script help - '3rd last field'
by Tom Brown 08 Jun '09

08 Jun '09

Hi I need some logic to work out a value for me - this value is _always_ the 3rd last field in a string seperated by '.' but the string could be 5 or 6 fields long, e.g foo.bar.VALUE.baz.lala foor.bar.gigi.VALUE.baz.lala I need to find VALUE - if this were python or something i could do it but this has to be in shell - Any clues? thanks

7 9