- Discuss - lists.centos.org

How to check server kernel support 32 Gb RAM (X86, CENTOS 4.7)??
by mcclnx mcc 30 Mar '09

30 Mar '09

we have CENTOS 4.7 (X86) on DELL server, I already put 32 GB RAM on it. I can use "top" or "free" to check memory and it did show 32 GB. I check REDHAT site and found it say: The "SMP" kernel supports a maximum of 16GB of main memory. Systems with more than 16GB of main memory use the "Hugemem" kernel. I use "uname -r" to check kernel and it show: # uname -r 2.6.9-78.0.13.ELsmp It did NOT show "Hugemem", does this server kernel support 32 GB or not? If NOT how can I change kernel to "hugeme"? Thanks. ______________________________________________________________________________________________________ 付費才容量無上限？Yahoo!奇摩電子信箱2.0免費給你，信件永遠不必刪！ http://tw.mg0.mail.yahoo.com/dc/landing

2 1

liblber-2.3.so.0 and libldap-2.3.so.0 -needed for Php 5.2
by Sean Waite 30 Mar '09

30 Mar '09

I am trying to upgrade Php 5.1 to 5.2, I have added a few repos for yum, but I end up getting two errors: Missing Dependency: libldap-2.3.so.0 is needed by package php-ldap Missing Dependency: liblber-2.3.so.0 is needed by package php-ldap I have openldap 2.4 installed, libldap-2.4.so.2.2.0 and liblber-2.4.so.2.2.0 are present. I know that I could link to these files correct? But would that break any compatibility? Any advice how I can proceed would be really helpful.

1 0

Re: [CentOS] need trouble ticket system
by Erick M. 30 Mar '09

30 Mar '09

Hi, i using [root@se~]# yum search otrs Setting up repositories Reading repository metadata in from local files Excluding Packages from CentOS-5 - Base Finished Excluding Packages from CentOS-5 - Updates Finished Excluding Packages from CentOS-5 - Extras Finished Excluding Packages from CentOS-5 - Addons Finished otrs.i386 2.3.3-01 installed Matched from: otrs The Open Ticket Request System (http://otrs.org/) is a web based ticket system. Feedback: feedback(a)otrs.org Authors: -------- Carsten Gross <carsten at siski.de> Christian Schoepplein <cs at otrs.de> Franz Breu <breu.franz at bogen.net> Fred van Dijk <fvandijk at marklin.nl> Lars M�LLER <lars at m5r.de> Nicolas Goralski <ngoralski at oceanet-technology.com> Richard Kammermayer <rk at otrs.de> Stefan Rother <sr at otrs.de> Thomas Raith <tr at otrs.de> Vladimir Gerdjikov <gerdjikov at gerdjikovs.net> Martin Edenhofer <me at otrs.de> OTRS is an Open source Ticket Request System with many features to manage customer telephone calls and e-mails. It is distributed under the GNU General Public License (GPL) and tested on Linux, Solaris, AIX, FreeBSD, OpenBSD and Mac OS 10.x. Do you receive many e-mails and want to answer them with a team of agents? You're going to love the OTRS! Feature list: Web-Interface: - Agent web interface for viewing and working on all customer requests - Admin web interface for changing system things - Customer web interface for viewing and sending infos to the agents - Webinterface with themes support - Multi language support (Brazilian Portuguese, Bulgarian, Dutch, English, Finnish, French, German, Italian and Spanish) - customize the output templates (dtl) release independently - Webinterface with attachment support - easy and logical to use Email-Interface: - PGP support - SMIME support - MIME support (attachments) - dispatching of incoming email via email addess or x-header - autoresponders for customers by incoming emails (per queue) - email-notification to the agent by new tickets, follow ups or lock timeouts Ticket: - custom queue view and queue view of all requests - Ticket locking - Ticket replies (standard responses) - Ticket autoresponders per queue - Ticket history, evolution of ticket status and actions taken on ticket - abaility to add notes (with different note types) to a ticket - Ticket zoom feature - Tickets can be bounced or forwarded to other email addresses - Ticket can be moved to a different queue (this is helpful if emails are for a specific subject) - Ticket priority - Ticket time accounting - Ticket merge feature - Ticket ACL support - content Fulltext search System: - creation and configuration of user accounts, and groups - creation of standard responses - Signature configuration per queue - Salutation configuration per queue - email-notification of administrators - email-notification sent to problem reporter (by create, locked, deleted, moved and closed) - submitting update-info (via email or webinterface). - deadlines for trouble tickets - ASP (activ service providing) support - TicketHook free setable like 'Call#', 'MyTicket#', 'Request#' or 'Ticket#' - Ticket number format free setable - different levels of permissions/access-rights. - central database, Support of different SQL databases (e. g. MySQL, PostgeSQL, ...) - user authentication agains database or ldap directory - easy to develope you own addon's (OTRS API) - easy to write different frontends (e. g. X11, console, ...) - own package manager (e. g. for application modules like webmail, calendar or filemanager) - a fast and usefull application from Salvador, Erick García --- El dom, 29/3/09, Eduardo Grosclaude <eduardo.grosclaude(a)gmail.com> escribió: > De: Eduardo Grosclaude <eduardo.grosclaude(a)gmail.com> > Asunto: Re: [CentOS] need trouble ticket system > Para: "CentOS mailing list" <centos(a)centos.org> > Fecha: domingo, 29 marzo, 2009 8:53 > On Sun, Mar 29, 2009 at 3:45 AM, > Dhaval Thakar > <dhaval.thakar(a)networthdirect.com> > wrote: > > Hi, > > > > I need to implement trouble tracking system, > GLPI may be worth a look > > -- > Eduardo Grosclaude > Universidad Nacional del Comahue > Neuquen, Argentina > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos >

1 0

Problem with Tomcat
by Sergio Belkin 30 Mar '09

30 Mar '09

Hi, Tomcat was running well and suddenly stop of working. I am using tomcat5-5.5.23-0jpp.7.el5_2.1 on Centos 5.2 /etc/tomcat5/tomcat5.conf looks like as follows: JAVA_HOME="/usr/lib/jvm/java" CATALINA_HOME="/usr/share/tomcat5" JASPER_HOME="/usr/share/tomcat5" CATALINA_TMPDIR="/usr/share/tomcat5/temp" JAVA_ENDORSED_DIRS="/usr/share/tomcat5/common/endorsed" JAVA_OPTS="$JAVA_OPTS -Dcatalina.ext.dirs=$CATALINA_HOME/shared/lib:$CATALINA_HOME/common/lib" TOMCAT_USER="tomcat" SHUTDOWN_WAIT=30 CATALINA_PID=/var/run/tomcat5.pid And var/log/tomcat5/catalina.out has: SEVERE: Begin event threw error java.lang.NoClassDefFoundError: javax/servlet/http/HttpServletRequest at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java:620) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124) at java.net.URLClassLoader.defineClass(URLClassLoader.java:260) at java.net.URLClassLoader.access$000(URLClassLoader.java:56) at java.net.URLClassLoader$1.run(URLClassLoader.java:195) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at java.lang.ClassLoader.loadClass(ClassLoader.java:251) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319) at java.lang.Class.getDeclaredMethods0(Native Method) at java.lang.Class.privateGetDeclaredMethods(Class.java:2427) at java.lang.Class.privateGetPublicMethods(Class.java:2547) at java.lang.Class.getMethods(Class.java:1410) at org.apache.tomcat.util.IntrospectionUtils.findMethods(IntrospectionUtils.java:812) at org.apache.tomcat.util.IntrospectionUtils.setProperty(IntrospectionUtils.java:268) at org.apache.catalina.startup.SetAllPropertiesRule.begin(SetAllPropertiesRule.java:59) at org.apache.tomcat.util.digester.Digester.startElement(Digester.java:1276) at org.apache.xerces.parsers.AbstractSAXParser.startElement(Unknown Source) at org.apache.xerces.parsers.AbstractXMLDocumentParser.emptyElement(Unknown Source) at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartElement(Unknown Source) at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source) at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source) at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source) at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source) at org.apache.xerces.parsers.XMLParser.parse(Unknown Source) at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source) at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source) at org.apache.tomcat.util.digester.Digester.parse(Digester.java:1562) at org.apache.catalina.startup.Catalina.load(Catalina.java:490) at org.apache.catalina.startup.Catalina.load(Catalina.java:524) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:267) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:432) Caused by: java.lang.ClassNotFoundException: javax.servlet.http.HttpServletRequest at java.net.URLClassLoader$1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at java.lang.ClassLoader.loadClass(ClassLoader.java:251) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319) ... 38 more java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:267) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:432) Caused by: java.lang.NoClassDefFoundError: javax/servlet/http/HttpServletRequest at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java:620) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124) at java.net.URLClassLoader.defineClass(URLClassLoader.java:260) at java.net.URLClassLoader.access$000(URLClassLoader.java:56) at java.net.URLClassLoader$1.run(URLClassLoader.java:195) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at java.lang.ClassLoader.loadClass(ClassLoader.java:251) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319) at java.lang.Class.getDeclaredMethods0(Native Method) at java.lang.Class.privateGetDeclaredMethods(Class.java:2427) at java.lang.Class.privateGetPublicMethods(Class.java:2547) at java.lang.Class.getMethods(Class.java:1410) at org.apache.tomcat.util.IntrospectionUtils.findMethods(IntrospectionUtils.java:812) at org.apache.tomcat.util.IntrospectionUtils.setProperty(IntrospectionUtils.java:268) at org.apache.catalina.startup.SetAllPropertiesRule.begin(SetAllPropertiesRule.java:59) at org.apache.tomcat.util.digester.Digester.startElement(Digester.java:1276) at org.apache.xerces.parsers.AbstractSAXParser.startElement(Unknown Source) at org.apache.xerces.parsers.AbstractXMLDocumentParser.emptyElement(Unknown Source) at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartElement(Unknown Source) at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source) at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source) at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source) at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source) at org.apache.xerces.parsers.XMLParser.parse(Unknown Source) at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source) at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source) at org.apache.tomcat.util.digester.Digester.parse(Digester.java:1562) at org.apache.catalina.startup.Catalina.load(Catalina.java:490) at org.apache.catalina.startup.Catalina.load(Catalina.java:524) ... 6 more Caused by: java.lang.ClassNotFoundException: javax.servlet.http.HttpServletRequest at java.net.URLClassLoader$1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at java.lang.ClassLoader.loadClass(ClassLoader.java:251) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319) ... 38 more -- -- Open Kairos http://www.openkairos.com Watch More TV http://sebelk.blogspot.com Sergio Belkin -

1 0

how to access encrypted EXT3 partition from Windows
by Rudi Ahlers 30 Mar '09

30 Mar '09

Hi all, I know some may find this OT, so please ignore this if you think it's OT. I don't know any Linux-friendly Windows mailing lists / forums that will even bother with Linux related questions. I want to carry some data (client info, documents, photos, email, accounting stuff, etc) with me on a USB HDD, but want to encrypt it. I know one easy way to shared data between Windows & Linux is to save it on a FAT32 partition. But, I can't encrypt FAT32, so instead I'll format the HDD with EXT3 (probably on a LVM as well), and then encrypt it. I also know there are a few good tools for Widows to read EXT3 partitions, but I can't find one that will read encrypted EXT3 partitions (maybe I'm not searching the correct terms?). So, does anyone know how to access (read & write) to EXT3 from Windows? -- Kind Regards Rudi Ahlers

3 5

Building my own Help Contents categories in Gnome Help Application
by Balaji 30 Mar '09

30 Mar '09

Dear All, Currently i have using RHEL4 Update 4 and CentOS 4.4 Linux PC and GNOME Version is gnome-session-2.8.0 and Scroll Keeper is scrollkeeper-0.3.14 I have implemented my own OMF with the help of Linux yelp command system scroll keeper OMF document . Currently my help will be added to default Help category. How can i add my own help category in gnome help application. Please Can any one guide me to implement my own category in existing GNOME Help Application. Thanks in advance Regards -S.Balaji

1 0

Adobe Flash Install Woes
by Chuck 30 Mar '09

30 Mar '09

I am having a hell of a time getting adobe flash to work on a recent 5.2 install. >From rpm install: Running firefox as root -- I have verified there is a symlink in /usr/lib/mozilla/plugins that points to the actual plugin located in /usr/lib/flash-plugins nada. SoI then copied the plugin directly into /usr/lib/mozilla/plugins and eliminated the symlink from the equation. nada. I then installed the plugin into the $HOME/.mozilla/plugins/ directory of a normal user (and making sure everything was read/executable by that user). nada. At no time does the adobe flash pugin ever appear in the plugins panel when viewing Tools->Addons from within the browser. I see no errors or any logs of any kind getting generated anywhere. An rpm check of both firefox and the flash plugin return with no complaints. I see scads of posts on google regarding other adobe flash player woes but none of the solutions i've found so far work. Since most of the sites I require access to, even metalink, required adobe flash this is a show stopper for me. Thanks for any help, CC

6 18

error when join my Centos machine to win2003 ADS server
by fabian dacunha 30 Mar '09

30 Mar '09

Dear All, I have succesfully managed to have my kerberos configured n working without error when i say kinit Administrator and after entering password it works fine my krb5.conf -------------- [logging] default = FILE:/var/log/krb5libs.log kdc = FILE:/var/log/krb5kdc.log admin_server = FILE:/var/log/kadmind.log [libdefaults] default_realm = BALADIA.LOCAL dns_lookup_kdc = false dns_lookup_realm = false [realms] BALADIA.LOCAL = { default_domain = baladia.local kdc = 172.16.2.227:88 admin_server = 172.16.2.227:749 kdc = KMUN } [domain_realm] baladia.local = BALADIA.LOCAL -------------------------------- klist shows icket cache: FILE:/tmp/krb5cc_0 Default principal: Administrator(a)BALADIA.LOCAL Valid starting Expires Service principal 03/26/09 11:33:04 03/26/09 21:33:18 krbtgt/BALADIA.LOCAL(a)BALADIA.LOCAL renew until 03/27/09 11:33:04 Kerberos 4 ticket cache: /tmp/tkt0 klist: You have no tickets cached ------------------------ now i configured /etc/samba/smb.conf but when i try to join the domain net ads join -U Administrator Administrator's password: [2009/03/26 21:58:05, 0] utils/net_ads.c:ads_startup_int(286) ads_connect: No logon servers Failed to join domain: No logon servers after googling and tryin various options in /etc/samba/smb.conf file here is the latest smb.conf file --------------------- [global] #--authconfig--start-line-- # Generated by authconfig on 2009/03/26 12:50:28 # DO NOT EDIT THIS SECTION (delimited by --start-line--/--end-line--) # Any modification may be deleted or altered by authconfig in future workgroup = BALADIA.LOCAL ; password server = kmun.baladia.local password server = 172.16.2.227 realm = KMUN.BALADIA.LOCAL security = ads idmap uid = 16777216-33554431 idmap gid = 16777216-33554431 winbind separator = + template shell = /bin/bash winbind use default domain = true winbind offline logon = false encrypt passwords = yes log level = 3 #--authconfig--end-line-- encrypt passwords = yes dns proxy = no server string = Samba Server Version %v os level = 20 client use spnego = no server signing = auto -------------------------------------- where i could be goin wrong i would be thankful and really apprecite your advice for any setting in my smb.conf file Is there anything else to check when i run testparam it gives no errors thnks and Regards Fabian -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

3 2

Re: [CentOS] Getting asciidoc
by James B. Byrne 30 Mar '09

30 Mar '09

On: Fri, 27 Mar 2009 23:31:51 +0100, Frank Thommen <frank.thommen(a)embl-heidelberg.de> wrote: >>> [dag] >>> [...] >>> enabled=0 >>> gpgkey=http://dag.wieers.com/packages/RPM-GPG-KEY.dag.txt >>> includepkgs=acsiidoc* bitt* perl* > ^^^^^^^^^ > ...this should probably read 'asciidoc'? :-) > > Cheers > > frank Ohhh CR*P... Thanks, -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

Q about 5.3 qt and qgis
by Michael A. Peters 29 Mar '09

29 Mar '09

Guess I'll find out soon enough ... In order to get qgis to build by RPM in CentOS 5.2 I had to update qt - but the shared library did not version - http://forum.qgis.org/viewtopic.php?f=3&t=4423 Since the qt shared library did not version with the minor update to qt, my suspicion (though I don't know for sure as I didn't look at source) is that the minor version bump was a small bug fix that would have likely just been a patch in RHEL. Anyway, I am curious - is the version of qt in rhel/centos sufficient for qgis or does it need the same minor version bump? Anyone on the list build qgis on RHEL 5.3? If so, was the shipped qt library sufficient? If it is not, then I'm thinking the right way to build qgis may be to see if it *really* needs the minor update and patch the makefile if it doesn't (I usually don't like replacing vendor packages).

1 0

sylpheed email client oddity
by Frank Cox 29 Mar '09

29 Mar '09

With the Sylpheed email client: Compose a message Click the button to attach a file to that message Attach a file Save the message to draft Compose another message Click the button to attach a file to that message With Sylpheed 2.5.0 on Fedora 10 I see the directory containing the file that I attached when composing the first message, which is what I expect to see. With sylpheed-2.0.4-0.el5.rf on Centos 5, I see the Sylpheed draft folder. To attach another file from the original directory I have to navigate back there. I don't remember it doing that before. Have I screwed up a setting somewhere? I searched through both the Sylpheed preferences and the Gnome preferences and didn't see anything relevant. -- MELVILLE THEATRE ~ Melville Sask ~ http://www.melvilletheatre.com

1 0

CentOS-announce Digest, Vol 49, Issue 13
by centos-announce-request＠centos.org 29 Mar '09

29 Mar '09

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2009:0398 Critical CentOS 3 ia64 seamonkey - security update (Pasi Pirhonen) 2. CESA-2009:0398 Critical CentOS 3 s390(x) seamonkey - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Sat, 28 Mar 2009 21:49:04 +0200 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2009:0398 Critical CentOS 3 ia64 seamonkey - security update To: centos-announce(a)centos.org Message-ID: <20090328194904.GF1337(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2009:0398 https://rhn.redhat.com/errata/RHSA-2009-0398.html The following updated files have been uploaded and are currently syncing to the mirrors: ia64: updates/ia64/RPMS/seamonkey-1.0.9-0.36.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-chat-1.0.9-0.36.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-devel-1.0.9-0.36.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-dom-inspector-1.0.9-0.36.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-js-debugger-1.0.9-0.36.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-mail-1.0.9-0.36.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-nspr-1.0.9-0.36.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-nspr-devel-1.0.9-0.36.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-nss-1.0.9-0.36.el3.centos3.ia64.rpm updates/ia64/RPMS/seamonkey-nss-devel-1.0.9-0.36.el3.centos3.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

OT: PCI Slot Adapter for 2.5" HDD?
by Tim Nelson 29 Mar '09

29 Mar '09

Greetings CentOS list! I do apologize in advance for the OT nature of this post. Since many of you have great experience with different hardware platforms, specialized systems, etc I'm hoping someone can help me out. I have a 1U server for a personal project with only two hard drive bays in front. However, I have two PCI-E slots in the back that are unpopulated and two free SATA ports on the motherboard. I'd really like to find PCI slot bracket for mounting a 2.5" laptop HDD or something similar. Something like this would work if it was PCI-E and was readily available: http://www.tomshardware.com/reviews/a-hard-disk-a-pci-slot,1061-3.html I also found a bracket system but its not exactly what I need... http://www.sunbeamtech.com/PRODUCTS/WHEREVER%20PCI%20RACK.HTML Sooo, whether it's an active card that plugs into the PCI-E slot, or just a dumb bracket that holds a HDD drive, either would work. I appreciate any and all pointers you can lend. Again, I apologize for the OT nature of the post. --Tim

1 0

LifeKeeper vs RH/CentOS Cluster
by Kwan Lowe 29 Mar '09

29 Mar '09

Hello All: I've configured a few instances of RedHat/CentOS clustering. For basic services such as web, dns, and LDAP it seems to work well. My basic configuration just uses the core services and a DRBD volume for the shared storage. We have some existing LifeKeeper clustered systems. I don't know much about them except that they use a similar hearbeat/shared storage solution. Has anyone here used both and can mention some pros/cons of each? In particular, is there anything that LifeKeeper provides that cannot be replicated via the RedHat/CentOS solution? Thanks all for any input.

1 0

lftp SSL_connect error
by Sean Carolan 29 Mar '09

29 Mar '09

I am unable to find any documentation about this error message, perhaps one of you has experienced this as well. We have an FTP server that is configured to accept FTP transactions over SSL. The server is working fine, as I am able to log in with lftp from my test linux machine in the office. None of our data center machines are able to connect so perhaps this is a firewall or NAT issue? Anyway here is the very un-descriptive error message: **** SSL_connect: error:00000000:lib(0):func(0):reason(0) ---- Closing control socket `ls' at 0 [Delaying before reconnect: 18] It just sits there trying to reconnect over and over again. Any ideas?

1 1

Installing on partitionable RAID arrays
by RedShift 29 Mar '09

29 Mar '09

Hello Since linux 2.6, the md layer has a feature called partitionable arrays. So instead of having two disks, creating an identical partition table on both and then putting those partitions in RAID 1, you take those two disks and put them in one partitionable RAID 1 array (in mdadm terms, "mdp") and create a partition table on the new RAID device. The advantages are quite clear compared to the old non-partitionable arrays. My question is, is this supported by CentOS? The GTK installer doesn't provide a way to create such an mdp device and the integrated partitioning tool does not see for example md_d0 when I create it manually from the console. Another way to get CentOS on such a configuration would be to do everything manually, thus installing the base system by creating the necessary disk allocations and then rpm -i all the required packages to get it to boot. (I've done this before, it's not a big deal, you just need to follow a certain order - I remember documenting it somewhere but forgot). But since this method is probably not officially documented anywhere or even supported I'll most likely won't get any support if this setup were to fail somehow (like when upgrading between minor versions). I've tried STFW'ing, but searching for centos and partitionable arrays is too ambiguous. Thanks, Best regards, Glenn Matthys

9 16

APCUPSD port 3551 permission problem
by Bob Taylor 29 Mar '09

29 Mar '09

I need a little help on this problem, please? I include my /etc/apcupsd/apcupsd.conf file is attached. port 3551 udp/tcp has been added to the (running) firewall. My APC is recognized as: APC Back-UPS 450 FW:844.Kld.D USB FW:Kld This from the hardware browser. PS says: root 2419 0.0 0.0 4196 584 ? Ss Mar23 0:09 /sbin/apcupsd -f /etc/apcupsd/apcupsd.conf Is group 2419 the problem? What should I name it? apcupsd? The status field of the Service Configuration GUI says: apcupsd (pid 2419) is running... Error contacting host localhost port 3551: Connection refused TIA -- Bob Taylor

2 2

xen serial port access for domu?
by Gordon McLellan 29 Mar '09

29 Mar '09

Is serial port "passthrough" possible for the version of xen that ships with centos 5.2? I've disabled the xen hypervisor serial console, and can see the serial port in dom0. I've masked out the 8250, 8250_pnp and serial_core modules on dom0 and rebooted. xm create domain fails with the error that exactly 4 arguments are required and only 3 were given. Steps I followed: 1) I have xencons=off as a kernel arg for dom0, and when dom0 boots, it finds the serial port. 2) I have blacklisted 8250, 8250_pnp and serial_core, rebooted, no serial port under dom0 3) added the following to my domu config (domu is 32bit centos 5.2, pvm) addirq = [ 4 ] ioports = [ "3f8-3ff" ] 4) now to start the vm and see what happens: # xm create mythserver Using config file "./mythserver". Error: function takes exactly 4 arguments (3 given) My host is 64 bit centos 5.2, domu is 32 bit centos 5.2. I'm running the stock redhat version of xen that ships with el5.2 Any suggestions? -Gordon # uname -a Linux xenmaster.dimension-x.local 2.6.18-92.1.22.el5xen #1 SMP Tue Dec 16 12:26:32 EST 2008 x86_64 x86_64 x86_64 GNU/Linux # xm log [2009-03-28 18:09:41 xend 8017] ERROR (xmlrpclib2:184) function takes exactly 4 arguments (3 given) Traceback (most recent call last): File "/usr/lib64/python2.4/site-packages/xen/util/xmlrpclib2.py", line 162, in _marshaled_dispatch response = self._dispatch(method, params) File "/usr/lib64/python2.4/SimpleXMLRPCServer.py", line 406, in _dispatch return func(*params) File "/usr/lib64/python2.4/site-packages/xen/xend/server/XMLRPCServer.py", line 64, in domain_create info = XendDomain.instance().domain_create(config) File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomain.py", line 238, in domain_create dominfo = XendDomainInfo.create(config) File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 205, in create vm.initDomain() File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 1507, in initDomain self.createDevices() File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 1716, in createDevices self.createDevice(n, c) File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 1189, in createDevice return self.getDeviceController(deviceClass).createDevice(devconfig) File "/usr/lib64/python2.4/site-packages/xen/xend/server/DevController.py", line 80, in createDevice (devid, back, front) = self.getDeviceDetails(config) File "/usr/lib64/python2.4/site-packages/xen/xend/server/iopif.py", line 78, in getDeviceDetails allow_access = True) TypeError: function takes exactly 4 arguments (3 given) Full pvm config file: # cat /etc/xen/mythserver name = "mythserver" uuid = "f06f3124-0f62-9ea6-ae2e-df597103b5de" maxmem = 1024 memory = 512 vcpus = 2 bootloader = "/usr/bin/pygrub" on_poweroff = "destroy" on_reboot = "restart" on_crash = "restart" vfb = [ "type=vnc,vncunused=1,keymap=en-us" ] disk = [ "phy:/dev/vg0/xen_mythserver,xvda,w" ] vif = [ "mac=00:16:3e:0a:bf:d8,bridge=xenbr0" ] pci = [ "0000:05:02.0","0000:06:08.0","0000:06:09.0" ] addirq = [ 4 ] ioports = [ "3f8-3ff" ] # xm info host : xenmaster.dimension-x.local release : 2.6.18-92.1.22.el5xen version : #1 SMP Tue Dec 16 12:26:32 EST 2008 machine : x86_64 nr_cpus : 8 nr_nodes : 1 sockets_per_node : 2 cores_per_socket : 4 threads_per_core : 1 cpu_mhz : 1995 hw_caps : bfebfbff:20100800:00000000:00000140:040ce33d:00000000:00000001 total_memory : 16382 free_memory : 784 node_to_cpu : node0:0-7 xen_major : 3 xen_minor : 1 xen_extra : .2-92.1.22.el5 xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64 xen_pagesize : 4096 platform_params : virt_start=0xffff800000000000 xen_changeset : unavailable cc_compiler : gcc version 4.1.2 20071124 (Red Hat 4.1.2-42) cc_compile_by : mockbuild cc_compile_domain : centos.org cc_compile_date : Tue Dec 16 11:51:08 EST 2008 xend_config_format : 2

1 0

command line programs for ldap
by Jerry Geis 28 Mar '09

28 Mar '09

Hi all. I am looking for some command line programs (pre made) that will connect to an ldap server and list out the users in question provided by the search argument given. I found some mention of it from oracle but I did not see where they can be downloaded. Is something like this available and I just havent found them? Thanks, Jerry

4 4

Minimal Install?
by Norberto Bensa 28 Mar '09

28 Mar '09

Hello list, I'm testing CentOS 5.2 as a possible Xen Server (i.e.: dom0) but the default no-items-selected still installs cups, portmap, and many other thing I don't want in a dom0 installation. I've already removed the packages I don't want, and replaced sendmail with postfix (I need a mailserver because of mdadm/smartd) but there're some executables I don't know what they do (gam_server for example) Two questions: 1) Is there a _real_ minimal install? 2) Is it possible, using yum, to know which packages holds what file? (like dpkg -S in Debian/Ubuntu) Many thanks in advance, Norberto

5 5

Installing on LVM on SW-RAID
by Norberto Bensa 28 Mar '09

28 Mar '09

Hello list, I'm trying to install CentOS 5.2 on LVM on a SW-RAID level 1, but I'm unable to understand how to use the installer correctly. What I'm trying to do is emulate something I've already done with another distro where: sda5 \ RAID1 --> /boot sdb5 / sda6 \ RAID1 --> LVM --> /root, /home, /usr, /var... etc. sdb6 / I've succesfully created the raid, and the PV for LVM, but I can't figure out how to create a VG inside the PV. Is it possible using the installer, or should I better install it using one disk, and once installed create the raid/pv/vg, and move everything around by hand? Many thanks in advance, Norberto

4 9

CentOS-announce Digest, Vol 49, Issue 12
by centos-announce-request＠centos.org 28 Mar '09

28 Mar '09

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2009:0398 Critical CentOS 3 i386 seamonkey - security update (Tru Huynh) 2. CESA-2009:0398 Critical CentOS 3 x86_64 seamonkey - security update (Tru Huynh) ---------------------------------------------------------------------- Message: 1 Date: Sat, 28 Mar 2009 15:45:12 +0100 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2009:0398 Critical CentOS 3 i386 seamonkey - security update To: centos-announce(a)centos.org Message-ID: <20090328144512.GB19431(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2009:0398 seamonkey security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2009-0398.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/seamonkey-1.0.9-0.36.el3.centos3.i386.rpm updates/i386/RPMS/seamonkey-chat-1.0.9-0.36.el3.centos3.i386.rpm updates/i386/RPMS/seamonkey-devel-1.0.9-0.36.el3.centos3.i386.rpm updates/i386/RPMS/seamonkey-dom-inspector-1.0.9-0.36.el3.centos3.i386.rpm updates/i386/RPMS/seamonkey-js-debugger-1.0.9-0.36.el3.centos3.i386.rpm updates/i386/RPMS/seamonkey-mail-1.0.9-0.36.el3.centos3.i386.rpm updates/i386/RPMS/seamonkey-nspr-1.0.9-0.36.el3.centos3.i386.rpm updates/i386/RPMS/seamonkey-nspr-devel-1.0.9-0.36.el3.centos3.i386.rpm updates/i386/RPMS/seamonkey-nss-1.0.9-0.36.el3.centos3.i386.rpm updates/i386/RPMS/seamonkey-nss-devel-1.0.9-0.36.el3.centos3.i386.rpm source: updates/SRPMS/seamonkey-1.0.9-0.36.el3.centos3.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update seamonkey\* Tru -- Tru Huynh (mirrors, CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

USB, AutoMount & VNC
by Guy Boisvert 28 Mar '09

28 Mar '09

Hi! I'm trying to figure out how to make automount do its job when nobody is logged at the console and the user access the server by VNC. Does anybody knows how to make CentOS automount USB Hard Drives / Pendrive when accessed by VNC? Thanks! Guy Boisvert, ing IngTegration inc.

4 5

Getting asciidoc
by James B. Byrne 28 Mar '09

28 Mar '09

I need to install asciidoc on my build machine. There is a version for CentOS-5 available at dags rpm site. I have a repository configured for dag like so: [dag] name=Dag Wieers RPM Repository for Red Hat Enterprise Linux #Also see URL http://dag.wieers.com/home-made/apt/ baseurl=http://apt.sw.be/redhat/el$releasever/en/$basearch/dag gpgkey=http://dag.wieers.com/rpm/packages/RPM-GPG-KEY.dag.txt gpgcheck=1 # this repo just does not respond in a timely fashion so # turned off by default # Use yum --enablerepo=dag to use. enabled=0 gpgkey=http://dag.wieers.com/packages/RPM-GPG-KEY.dag.txt includepkgs=acsiidoc* bitt* perl* # priority requires yum-priorities. Must also be enabled in # yum.conf and /etc/yum/pluginconf.d/priorities.conf priority=20 I tried to install asciidoc using yum like so: # yum --enablerepo=dag install asciidoc Loading "fastestmirror" plugin Loading mirror speeds from cached hostfile * epel: www.muug.mb.ca * adobe-linux-i386: linuxdownload.adobe.com * dag: apt.sw.be * base: mirror.csclub.uwaterloo.ca * updates: www.muug.mb.ca * addons: www.muug.mb.ca * extras: www.muug.mb.ca Reducing Extra Packages for Enterprise Linux 5 - x86_64 to included packages only Finished Reducing Dag Wieers RPM Repository for Red Hat Enterprise Linux to included packages only Finished Setting up Install Process Parsing package install arguments No package asciidoc available. Nothing to do What am I doing wrong? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

5 7

Open Source Mail Server Solution for RHEL/CentOS 5.x
by Zhang Huangbin 28 Mar '09

28 Mar '09

Hi, all. I'd like to introduce iRedMail open source mail server solution for RHEL/CentOS to you. * iRedMail is: - mail server solution for Red Hat(R) Enterprise Linux and CentOS 5.x, support both i386 and x86_64. - a shell script set, used to install and configure all mail server related software automatically. - open source project (GPL v2). * iRedOS is: - Customized CentOS 5.x, remove unnecessary packages - Ships iRedMail. * Download: - http://code.google.com/p/iredmail/downloads/list - http://www.iredmail.org/iredos/ * Feature list: http://code.google.com/p/iredmail/wiki/Features * Installation guide: http://code.google.com/p/iredmail/wiki/Installation * Success Stories: http://code.google.com/p/iredmail/wiki/Success_Stories * Group/Forum: http://groups.google.com/group/iredmail/ -- Best regards. Zhang Huangbin - Open Source Mail Server Solution for RHEL/CentOS 5.x: http://code.google.com/p/iredmail/

1 0

CentOS VPN server for iPhone
by Florin Andrei 28 Mar '09

28 Mar '09

So far, OpenVPN has been working very well for me. Unfortunately, the iPhone doesn't have (yet?) an OpenVPN client, so I'm forced to work with what's available. The options are: L2TP, PPTP and IPSec. If you were to install a VPN endpoint on CentOS, which protocol would you prefer? The condition is to avoid shabby VPN servers that make the system less secure. I've seen some PPTP servers for Linux in the past but I was not impressed with their security track record. I'm not necessarily talking about crypto, I'm talking about the way the application is written. Another condition is ease of installation. I will compile from source if I have no other choice, but I'd rather avoid wasting time with that, as I'm quite busy with non-tech things nowadays. If the application is in a repo somewhere, that would be perfect. Thanks! -- Florin Andrei http://florin.myip.org/

8 14

Server Hang
by Care India 28 Mar '09

28 Mar '09

I have Cent OS 5.1 I also have http://phpsysinfo.sourceforge.net/ I have asterisk running . Now when I look at System Information , I see that "Physical Memory" keep increasing and at one point it reaches 96%. Then my sever get hang and then I have to restart it. I have 4 GB RAM. Processors 2 Model Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz CPU Speed 2.53 GHz Cache Size 3.00 MB System Bogomips 10135.71 Kernel Version 2.6.18-53.el5 (SMP) Distro Name CentOS release 5 (Final) Load Averages 0.27 0.35 0.31 What could be the reason ? ps ax shows : PID TTY STAT TIME COMMAND 1 ? Ss 0:00 init [3] 2 ? S 0:00 [migration/0] 3 ? SN 0:00 [ksoftirqd/0] 4 ? S 0:00 [watchdog/0] 5 ? S 0:00 [migration/1] 6 ? SN 0:00 [ksoftirqd/1] 7 ? S 0:00 [watchdog/1] 8 ? S< 0:00 [events/0] 9 ? S< 0:00 [events/1] 10 ? S< 0:00 [khelper] 11 ? S< 0:00 [kthread] 15 ? R< 0:00 [kblockd/0] 16 ? S< 0:00 [kblockd/1] 17 ? S< 0:00 [kacpid] 109 ? S< 0:00 [cqueue/0] 110 ? S< 0:00 [cqueue/1] 113 ? S< 0:00 [khubd] 115 ? S< 0:00 [kseriod] 182 ? S 0:00 [pdflush] 183 ? S 0:00 [pdflush] 184 ? S< 0:00 [kswapd0] 185 ? S< 0:00 [aio/0] 186 ? S< 0:00 [aio/1] 338 ? S< 0:00 [kpsmoused] 370 ? S< 0:00 [ata/0] 371 ? S< 0:00 [ata/1] 372 ? S< 0:00 [ata_aux] 376 ? S< 0:00 [scsi_eh_0] 377 ? S< 0:00 [scsi_eh_1] 378 ? D< 0:00 [kjournald] 405 ? S< 0:00 [kauditd] 439 ? S<s 0:00 /sbin/udevd -d 1374 ? S< 0:00 [kmpathd/0] 1375 ? S< 0:00 [kmpathd/1] 1405 ? S< 0:00 [kjournald] 1967 ? Ss 0:00 syslogd -m 0 1970 ? Ss 0:00 klogd -x 2021 ? Ss 0:00 portmap 2046 ? Ss 0:00 rpc.statd 2062 ? Ss 0:00 dbus-daemon --system 2103 ? Ss 0:00 /usr/sbin/acpid 2130 ? Ss 0:00 /usr/sbin/sshd 2219 ? S 0:00 /bin/sh /usr/bin/mysqld_safe --defaults-file=/etc/my. 2255 ? Sl 0:01 /usr/libexec/mysqld --defaults-file=/etc/my.cnf --bas 2294 ? Ss 0:00 sendmail: accepting connections 2302 ? Ss 0:00 sendmail: Queue runner@01:00:00 for /var/spool/client 2320 ? Ss 0:00 /usr/sbin/httpd 2335 ? Ss 0:00 crond 2364 ? Ss 0:00 /usr/sbin/atd 2379 ? Ss 0:00 hald 2380 ? S 0:00 hald-runner 2387 ? S 0:00 /usr/sbin/httpd 2388 ? S 0:00 /usr/sbin/httpd 2389 ? S 0:00 /usr/sbin/httpd 2390 ? S 0:00 /usr/sbin/httpd 2391 ? S 0:00 /usr/sbin/httpd 2392 ? S 0:00 hald-addon-acpi: listening on acpid socket /var/run/a 2393 ? S 0:00 /usr/sbin/httpd 2394 ? S 0:00 /usr/sbin/httpd 2396 ? S 0:00 /usr/sbin/httpd 2397 ? S 0:00 /usr/libexec/hald-addon-cpufreq 2402 ? S 0:00 hald-addon-keyboard: listening on /dev/input/event0 2630 ? Ss 0:00 /usr/sbin/vsftpd /etc/vsftpd/vsftpd.conf 2746 ? Ss 0:00 /usr/bin/SCREEN -L -d -m -S asterisk /usr/sbin/asteri 2747 pts/0 Ssl+ 0:01 /usr/sbin/asterisk -vvvvvvvvvvvvvvvvvvvvvgc 2801 ? Ss 0:00 /usr/bin/SCREEN -d -m -S ASTupdate /usr/share/astguic 2803 pts/1 Ss+ 0:01 /usr/bin/perl /usr/share/astguiclient/AST_update.pl 2804 ? Ss 0:00 /usr/bin/SCREEN -d -m -S ASTsend /usr/share/astguicli 2805 pts/2 Ss+ 0:00 /usr/bin/perl /usr/share/astguiclient/AST_manager_sen 2807 ? Ss 0:00 /usr/bin/SCREEN -d -m -S ASTlisten /usr/share/astguic 2808 pts/3 Ss+ 0:00 /usr/bin/perl /usr/share/astguiclient/AST_manager_lis 2810 ? Ss 0:00 /usr/bin/SCREEN -d -m -S ASTVDauto /usr/share/astguic 2811 pts/4 Ss+ 0:00 /usr/bin/perl /usr/share/astguiclient/AST_VDauto_dial 2813 ? Ss 0:00 /usr/bin/SCREEN -d -m -S ASTVDremote /usr/share/astgu 2815 pts/5 Ss+ 0:00 /usr/bin/perl /usr/share/astguiclient/AST_VDremote_ag 2816 ? Ss 0:00 /usr/bin/SCREEN -d -m -S ASTVDadapt /usr/share/astgui 2818 pts/6 Ss+ 0:00 /usr/bin/perl /usr/share/astguiclient/AST_VDadapt.pl 2819 ? Ss 0:00 /usr/bin/SCREEN -d -m -S ASTfastlog /usr/share/astgui 2820 pts/7 Ss+ 0:00 /usr/bin/perl /usr/share/astguiclient/FastAGI_log.pl 2828 ? S 0:00 ip_relay 40569 127.0.0.1 4569 9999999 2829 ? S 0:00 ip_relay 41569 127.0.0.1 4569 9999999 2836 pts/7 S+ 0:00 /usr/bin/perl /usr/share/astguiclient/FastAGI_log.pl 2837 pts/7 S+ 0:00 /usr/bin/perl /usr/share/astguiclient/FastAGI_log.pl 2838 pts/7 S+ 0:00 /usr/bin/perl /usr/share/astguiclient/FastAGI_log.pl 2839 pts/7 S+ 0:00 /usr/bin/perl /usr/share/astguiclient/FastAGI_log.pl 2840 pts/7 S+ 0:00 /usr/bin/perl /usr/share/astguiclient/FastAGI_log.pl 2869 ? S 0:00 /usr/sbin/smartd -q never 2875 ? Ss 0:00 /usr/bin/perl /usr/libexec/webmin/miniserv.pl /etc/we 2880 tty1 Ss+ 0:00 /sbin/mingetty tty1 2883 tty2 Ss+ 0:00 /sbin/mingetty tty2 2884 tty3 Ss+ 0:00 /sbin/mingetty tty3 2885 tty4 Ss+ 0:00 /sbin/mingetty tty4 2886 tty5 Ss+ 0:00 /sbin/mingetty tty5 2887 tty6 Ss+ 0:00 /sbin/mingetty tty6 3040 ? S 0:00 crond 3047 ? Ss 0:00 /usr/bin/perl /usr/share/astguiclient/AST_CRON_audio_ 3072 ? S 0:00 /usr/sbin/sendmail -FCronDaemon -i -odi -oem -oi -t 3191 ? S 0:00 crond 3199 ? Ss 0:00 /usr/bin/perl /usr/share/astguiclient/AST_CRON_audio_ 3212 ? S 0:00 /usr/sbin/sendmail -FCronDaemon -i -odi -oem -oi -t 3699 ? S 0:00 crond 3705 ? Ss 0:00 /usr/bin/perl /usr/share/astguiclient/AST_CRON_audio_ 3718 ? S 0:00 /usr/sbin/sendmail -FCronDaemon -i -odi -oem -oi -t 4090 ? S 0:00 crond 4096 ? Ss 0:00 /usr/bin/perl /usr/share/astguiclient/AST_CRON_audio_ 4112 ? S 0:00 /usr/sbin/sendmail -FCronDaemon -i -odi -oem -oi -t 5027 ? S 0:00 crond 5030 ? Ss 0:00 /usr/bin/perl /usr/share/astguiclient/AST_CRON_audio_ 5049 ? S 0:00 /usr/sbin/sendmail -FCronDaemon -i -odi -oem -oi -t 5572 ? S 0:00 crond 5578 ? Ss 0:00 /usr/bin/perl /usr/share/astguiclient/AST_CRON_audio_ 5592 ? S 0:00 /usr/sbin/sendmail -FCronDaemon -i -odi -oem -oi -t 6982 ? S 0:00 crond 6988 ? Ss 0:00 /usr/bin/perl /usr/share/astguiclient/AST_CRON_audio_ 7012 ? S 0:00 /usr/sbin/sendmail -FCronDaemon -i -odi -oem -oi -t 7782 ? S 0:00 crond 7787 ? Ss 0:00 /usr/bin/perl /usr/share/astguiclient/AST_CRON_audio_ 7810 ? S 0:00 /usr/sbin/sendmail -FCronDaemon -i -odi -oem -oi -t 9586 ? S 0:00 crond 9594 ? Ss 0:00 /usr/bin/perl /usr/share/astguiclient/AST_CRON_audio_ 9623 ? S 0:00 /usr/sbin/sendmail -FCronDaemon -i -odi -oem -oi -t 10562 ? S 0:00 crond 10564 ? S 0:00 crond 10568 ? Ss 0:00 /usr/bin/perl /usr/share/astguiclient/AST_CRON_audio_ 10569 ? Ss 0:00 /usr/bin/perl /usr/share/astguiclient/AST_manager_kil 10597 ? S 0:00 /usr/sbin/sendmail -FCronDaemon -i -odi -oem -oi -t 10988 ? Ss 0:00 sshd: root@pts/8 11045 pts/8 Ss 0:00 -bash 11355 pts/8 R+ 0:00 ps ax I used VicidialNOW CD which comes with integrated CentOS and Asterisk. 1) If I upgrade kernel , wont it break the functionality of any files ? 2) If it wotn break, then how to upgrade ?

3 3

Re: [CentOS] Welcome to the "CentOS" mailing list (Digest mode)
by zhangrichard 28 Mar '09

28 Mar '09

> Subject: Welcome to the "CentOS" mailing list (Digest mode) > From: centos-request(a)centos.org > To: gzpowerchess(a)hotmail.com > Date: Fri, 27 Mar 2009 03:09:42 -0400 > > Welcome to the CentOS(a)centos.org mailing list! > > To post to this list, send your email to: > > centos(a)centos.org > > General information about the mailing list is at: > > http://lists.centos.org/mailman/listinfo/centos > > If you ever want to unsubscribe or change your options (eg, switch to > or from digest mode, change your password, etc.), visit your > subscription page at: > > http://lists.centos.org/mailman/options/centos/gzpowerchess%40hotmail.com > > > You can also make such adjustments via email by sending a message to: > > CentOS-request(a)centos.org > > with the word `help' in the subject or body (don't include the > quotes), and you will get back a message with instructions. > > You must know your password to change your options (including changing > the password, itself) or to unsubscribe. It is: > > 56180284 > > Normally, Mailman will remind you of your centos.org mailing list > passwords once every month, although you can disable this if you > prefer. This reminder will also include instructions on how to > unsubscribe or change your account options. There is also a button on > your options page that will email your current password to you. _________________________________________________________________ 上Windows Live 中国首页，下载最新版 MSN！ http://im.live.cn/

3 2

Cannot get CentOS to install
by Michael Peterson 27 Mar '09

27 Mar '09

I used google but did not come up with anything current to solve my problem. I have not tried any other search engines yet. There is not a search for the CentOS list so I am creating a new post. I have tested the CentOS 5.2 and RHEL 5.3 CD's and they passed. I had to use linux mediacheck ide=nodma to get them to pass. The newest releases seem to most times fail with just linux mediacheck. I have tried linux ide=nodma and linux text ide=nodma after trying linux and linux text Anaconda fails on both CentOS 5.2 and RHEL 5.3 in all cases. The system I am trying to install on is running CentOS 3.x. The hardware is P4 2.8 CPU, 512 MB RAM, 120GB 3ware IDE/PATA RAID HD, ATI Video, CDRW CD, Dual Nic, Floppy and IDE/PATA Tape drive. Please provide any options to the kernel that I should try besides the ones mentioned above that fail.

13 24

CentOS-announce Digest, Vol 49, Issue 11
by centos-announce-request＠centos.org 27 Mar '09

27 Mar '09

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2009:0362 Moderate CentOS 4 ia64 NetworkManager - security update (Pasi Pirhonen) 2. CESA-2009:0295 Moderate CentOS 3 ia64 net-snmp - security update (Pasi Pirhonen) 3. CESA-2009:0373 Moderate CentOS 4 ia64 systemtap - security update (Pasi Pirhonen) 4. CESA-2009:0295 Moderate CentOS 3 i386 net-snmp - security update (Tru Huynh) 5. CESA-2009:0295 Moderate CentOS 3 x86_64 net-snmp - security update (Tru Huynh) 6. CESA-2009:0373 Moderate CentOS 4 s390(x) systemtap - security update (Pasi Pirhonen) 7. CESA-2009:0295 Moderate CentOS 3 s390(x) net-snmp - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Thu, 26 Mar 2009 19:13:41 +0200 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2009:0362 Moderate CentOS 4 ia64 NetworkManager - security update To: centos-announce(a)centos.org Message-ID: <20090326171340.GA1337(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2009:0362 https://rhn.redhat.com/errata/RHSA-2009-0362.html The following updated files have been uploaded and are currently syncing to the mirrors: ia64: updates/ia64/RPMS/NetworkManager-0.3.1-5.el4.ia64.rpm updates/ia64/RPMS/NetworkManager-gnome-0.3.1-5.el4.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

PXE-Kernel crashes with "RAMDISK: incomplete write ..." after modifiying initrd.img
by Frank Thommen 27 Mar '09

27 Mar '09

Hi, to install current PC models (with new Intel NICs) via Kickstart/PXE, I wanted to add the newest e1000e-Treiber to initrd.img. With this modified image, the Kickstart kernel crashes with the following error messages: [...] md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 RAMDISK: incomplete write (20480 != 32768) 6062080 VFS: Cannot open root device "<NULL>" or unknown-block(253,3) Please append a correct "root=" boot option Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(253,3) To modify the initrd.img, I took the original CentOS 5.2 image, unpacked with cpio/gunzip and replaced modules/2.6.18-92.el5/x86_64/e1000e.ko with a current version. This driver module had been created on a freshly installed CentOS 5.2 host with kernel 2.6.18-92.el5 and w/o any updates. After adding the driver, I re-archived and re-packed the image and replaced the initrd.img on my tftp server. The new image is considerably bigger than the old one (12 MB vs. 5.7 MB) which puzzles me, as the driver file itself is 2.8 MB (compared to the old e1000e.ko with ca 170 KB) but the resulting modules.cgz is only around 700 KB bigger than the original one. All files have been compressed with `gzip -9`. My PXE bootsettings are: KERNEL CentOS-5.2_64/vmlinuz APPEND initrd=CentOS-5.2_64/initrd.img ramdisk_size=5940 kssendmac ks=http://srv/ks/ks.cgi noipv6 Even raising ramdisk_size doesn't help. At around ramdisk_size=7100 there seems to be an overflow and the size is recounted from zero (?). Any Ideas, how one can/should create an updated and working initrd.img for Kickstart/PXE? A similar question has been asked before on this list and a recommendation was to wait for 5.3. Unfortunately I cannot wait for the next release. Thanks in advance frank

6 13

Re: [CentOS] CentOS VPN server for iPhone
by Bowie Bailey 27 Mar '09

27 Mar '09

Joseph L. Casale wrote: > > The non-standard port is a good trick, > > Here's just an opinion: Security by obscurity only > makes >you< feel good, it does nothing in reality. > Anyone sufficiently talented to hack a service in > order to gain root or do something useful would not > be fooled by that. Set whatever your doing up right > so that any false sense of security is not deemed > necessary. Changing port numbers will not stop a talented person who is intent on breaking into your network. However, it will stop (or at least slow down) the script-kiddies, worms, and others out there who are just scanning for misconfigured or unpatched applications. Switching SSH to a non-standard port completely emptied my log files of bad connection attempts. Now, if someone attempts to break in, it will be VERY obvious in the logs where before, it would have been buried in all of the other garbage. > Prevent weak passwords, possibly use connection throttling > etc etc. Of course. No one is suggesting that changing port numbers is all you need to do. It is just one more thing that you can do to slow down the attackers. -- Bowie

1 0

Installing openmpi & lam for use with R
by Rick Bilonick 27 Mar '09

27 Mar '09

I am trying to install the R package "Rmpi" which needs libmpi. I've installed openmpi and lam in Centos 5.2: [root@rab45-1 /]# rpm -qv openmpi openmpi-1.2.5-5.el5 openmpi-1.2.5-5.el5 [root@rab45-1 /]# rpm -qv lam lam-7.1.2-14.el5 lam-7.1.2-14.el5 But I get the following error message when trying to install Rmpi: /usr/bin/ld: skipping incompatible /usr/lib/lam/lib/libmpi.so when searching for -lmpi I'm not sure what else to install/uninstall to fix this. Rick B.

3 2

tar with -N option still picking up old files
by Neil Aggarwal 27 Mar '09

27 Mar '09

Hello: I tried this command to tar up a set of data files updated since yesterday (The data directory contains multiple files with varying dates): /bin/tar -z -c -N 2009-03-25 -f /tmp/test.tgz data When I look at the content of the test.tgz file, it looks like it copied the content of the entire directory, not just the newer files. I am on CentOS 5. Any ideas? Thanks, Neil -- Neil Aggarwal, (832)245-7314, www.JAMMConsulting.com Eliminate junk email and reclaim your inbox. Visit http://www.spammilter.com for details.

4 4

manage different profile with a laptop
by MOKRANI Rachid 27 Mar '09

27 Mar '09

Hi, I need to use different profile with some linux CentOS laptops. - I need to connect the laptops at work with NIS, automount, DHCP .... - The same laptops can be use at home without NIS etc..but with personal wifi connection .... - The same laptops can be use in travel without network configuration Which best software to use to manage different profile ? Regards. __________________________ Ce message (et toutes ses pièces jointes éventuelles) est confidentiel et établi à l'intention exclusive de ses destinataires. Toute utilisation de ce message non conforme à sa destination, toute diffusion ou toute publication, totale ou partielle, est interdite, sauf autorisation expresse. L'IFP décline toute responsabilité au titre de ce message. This message and any attachments (the message) are confidential and intended solely for the addressees. Any unauthorised use or dissemination is prohibited. IFP should not be liable for this message. Visitez notre site Web / Visit our web site : http://www.ifp.fr __________________________

2 1

Re: [CentOS] 64bit Python 32bit c library ...
by Mark Pryor 27 Mar '09

27 Mar '09

--- On Thu, 3/26/09, Ben <abnormaliti(a)clivepeeters.com.au> wrote: > From: Ben <abnormaliti(a)clivepeeters.com.au> > Subject: [CentOS] 64bit Python 32bit c library ... > To: "CentOS mailing list" <centos(a)centos.org> > Date: Thursday, March 26, 2009, 10:48 PM > > -----Inline Attachment Follows----- > > I have a closed-source 32bit > database application running on a 64bit > CentOS 5.2 system which is running very well however i am > looking at > developing some python applications that require access to > the data and > the vendor only provides a 32bit c library. > > So while attempting to utilize the library in python with > ctypes it > became obvious that the 64bit python cannot use the 32bit c > library. > > So what are my choices? > Yum and so many of the applets (system-config-*) are tied to Python that you can't mess with the base version or arch of Python. What about a 32 bit chroot using Mock? I've never done it, but that's what Mock is intended to do. Perl.i386 will run OK in x86_64 and there is a version of perl-Inline-CPP that will allow you to write most of what you want in CPP and wrap it with Perl. -- Mark

2 1

64bit Python 32bit c library ...
by Ben 27 Mar '09

27 Mar '09

I have a closed-source 32bit database application running on a 64bit CentOS 5.2 system which is running very well however i am looking at developing some python applications that require access to the data and the vendor only provides a 32bit c library. So while attempting to utilize the library in python with ctypes it became obvious that the 64bit python cannot use the 32bit c library. So what are my choices? 1. is there a way to use the 32bit library in 64bit python i haven't found? 2. install 32bit python on the 64bit system. 'yum list python.i386' shows that 32bit python is not available. 3. manually compile and install 32bit python and _ALL_ its libraries under /opt. has someone already done this? are the RPMs available? let me just say that i am no python expert, yet, so bare with me. Any help would be appreciated. Ben

1 0

mirrorlist.centos.org offline? NO A RECORD IN DNS
by Danny.Terweij 27 Mar '09

27 Mar '09

Is mirrorlist.centos.org out of the air? because there is no A record for it. Which causes yum to fail. Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=5&arch=x86_64&repo=os error was [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')> Error: Cannot find a valid baseurl for repo: base Danny.

3 3

[OT] Network switches
by Scott McClanahan 27 Mar '09

27 Mar '09

I'm looking to acquire a few new core switches for our network which would be a major upgrade from the cheap unmanaged things we currently have. Basically, just users, servers, and other simple network devices will be plugged into them but I'd like to start doing some testing with iSCSI for various non-production reasons. I have no allegiance to a particular vendor although I do have a Cisco background. I'd like them to be at least 10/100/1000 (no need for power over ethernet) and include many of the features that are most important to me in a managed switch, including: * vlans * mstp or some well established form of per vlan spanning tree * acl's * port mirroring or what cisco calls span sessions * snmp * ssh enabled remote management * support w/ updates and bugfixes I need at least 48 ports per device and obviously would like them to be "fast". Most importantly, I'd like to know what you guys prefer as operations dudes and what pitfalls to avoid. Also, are there other features you folks would demand to have in your switches that I haven't mentioned? I can provide more information if you'd like. Thanks. Oh, cost is sort of an issue (small/medium sized business) but right now insight from you guys is what's important and I can work out the cost issue later. Thanks again.

17 33

Dell 120 GB 5400 RPM Encrypted Serial ATA Hard Drive
by Agile Aspect 26 Mar '09

26 Mar '09

Hi - I've been asked to re-partition a Dell 120 GB 5400 RPM Encrypted Serial ATA Hard Drive and install CentOS 5 on the new partition. It's a Dell Lattitude E5400 laptop. Is this even possible with encrypted drives? Does CentOS 5 need special drivers? Any help would be greatly appreciated. -- Agile -- Article. VI. Clause 3 of the constitution of the United States states: "The Senators and Representatives before mentioned, and the Members of the several State Legislatures, and all executive and judicial Officers, both of the United States and of the several States, shall be bound by Oath or Affirmation, to support this Constitution; but no religious Test shall ever be required as a Qualification to any Office or public Trust under the United States."

5 5

revisor tool
by JC Putter 26 Mar '09

26 Mar '09

Hi does revisor work on centos 5.2 final? is it possible to create my own distro with config and all 3rd party installed software? __________ Information from ESET NOD32 Antivirus, version of virus signature database 3966 (20090326) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

1 0

CentOS 5.2 and wired Ethernet on a Macbook Pro?
by Scott R. Ehrlich 26 Mar '09

26 Mar '09

I recently installed CentOS 5.2 64-bit on a partition on a MacBook Pro 17 inch. It installed just fine, but wired Ethernet is not available. lspci shows it as nVidia...unknown. Is it possible to get wired Ethernet running on this laptop under CentOS without having to create a virtual machine installation of CentOS? If so, what is the magic? Thanks. Scott

2 1

help on kerberos5
by fabian dacunha 26 Mar '09

26 Mar '09

Dear All, this i feel is a little out of topic but really apprecite if someone can help i am tryin to authenicate my Centos 5.2 box to windows 2003 ADS server .. but am not able to do so . i get the following error when i run kinit kinit(v5): Improper format of Kerberos configuration file while initializing Kerberos 5 library i have the following packages installed on my linux box [root@testproxy init.d]# rpm -qa | grep krb krb5-devel-1.6.1-25.el5_2.2 krb5-workstation-1.6.1-25.el5_2.2 krb5-auth-dialog-0.7-1 krb5-libs-1.6.1-25.el5_2.2 pam_krb5-2.2.14-1.el5_2.1 rpm -qa|grep ntp ntp-4.2.2p1-8.el5.centos.1 chkfontpath-1.10.1-1.1 root@testproxy init.d]# rpm -qa|grep samba system-config-samba-1.2.39-1.el5 samba-client-3.0.28-1.el5_2.1 samba-common-3.0.28-1.el5_2.1 samba-3.0.28-1.el5_2.1 my domain name is===> baladia.local Windows 2003 AD server computer name is====> kmun my /etc/krb5.conf file is ---- [logging] default = FILE:/var/log/krb5libs.log kdc = FILE:/var/log/krb5kdc.log admin_server = FILE:/var/log/kadmind.log [libdefaults] ticket_lifetime=24000 default_realm=BALADIA.LOCAL dns_lookup_realm = false dns_lookup_kdc = false [realms] BALADIA.LOCAL={ kdc=172.16.2.227:88 # admin_server=kmun.baladia.local:749 default_domain=BALADIA.LOCAL kdc=BALADIA.LOCAL } [domain_realm] .baladia.local=BALADIA.LOCAL baladia.local=BALADIA.LOCAL kerberos 88/udp kdc # Kerberos key server kerberos 88/tcp kdc # Kerberos key server [kdc] profile = /var/kerberos/krb5kdc/kdc.conf [appdefaults] pam = { debug = false ticket_lifetime = 36000 renew_lifetime = 36000 forwardable = true krb4_convert = false } as i said before when i run kinit kinit(v5): Improper format of Kerberos configuration file while initializing Kerberos 5 library i tried googlin n tried varios options in the conf file but no luck i would really apprecite n be thankful if someone could point out the syntax error in my krb5.conf file or if any missing software i need to check n install or anyway i could track this error also is there anything to check on my windows 2003 AD Server Thanks and appreciate Fabain -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

4 4

Monitoring IP masquerading on LVS load-balancing
by David Dyer-Bennet 26 Mar '09

26 Mar '09

I've got small numbers of connections moving through a load balancer configured in NAT mode. So I've got an iptables table called "nat", which has in it a line "-A POSTROUTING -o eth0 -j MASQUERADE" (lan connect is eth0, private lan inside the cluster is eth1). The load balancer is working; connections made to the virtual ip on that host do get routed to one of the real servers behind this load load balancer. But I want to observe the connections on the load balancer. My first attempt was to use netstat with the --masquerade switch. This produced the result "netstat: no support for `ip_masquerade' on this system." Consistent with this, there is no /proc/net/ip_masquerade. On the other hand, the load balancer *IS* working; those connections *are* getting NATted and routed. Also, lsmod shows varous relevant modules loaded: iptable_nat 40773 1 ip_nat 53101 2 ipt_MASQUERADE,iptable_nat ip_conntrack 91237 5 xt_state,ip_conntrack_netbios_ns,ipt_MASQUERADE,iptable_nat,ip_nat nfnetlink 40457 2 ip_nat,ip_conntrack ip_tables 55329 2 iptable_filter,iptable_nat x_tables 50377 7 xt_state,ipt_REJECT,xt_tcpudp,ipt_MASQUERADE,xt_multiport,iptable_nat,ip_tables So, netstat just isn't somehow the right monitoring tool, right? So what is the right monitoring tool? I need to know the source IP and real-server IP of connections being handled by the load balancer. I don't need a lot showing exactly how each one was handled, but I'd like to be able to determine the state of any connection currently active. How can I do this? -- David Dyer-Bennet, dd-b(a)dd-b.net; http://dd-b.net/ Snapshots: http://dd-b.net/dd-b/SnapshotAlbum/data/ Photos: http://dd-b.net/photography/gallery/ Dragaera: http://dragaera.info

3 4

Re: [CentOS] Security advice, please
by Anne Wilson 26 Mar '09

26 Mar '09

On Tuesday 23 December 2008 15:38:17 Warren Young wrote: > Michael Simpson wrote: > >> GRC reports that ports are stealthed > > > > Try www.auditmypc.com or nmap-online.com rather than grc to look for open > > ports > > What advantages do they have, in your opinion? > > >> there a better way than opening port 143? > > > > ssh tunnelling? > > I agree, though the default CentOS sshd configuration requires some > tightening down to trust it on Internet-facing servers, IMHO: > > 1. In /etc/ssh/sshd_config, set "PasswordAuthentication no". No matter > how good your password, it isn't as good as using keys. Remember, > forwarding ssh opens it to pounding 24x7 from any of the millions on > zombie boxes on the Internet. > > 2. On the machine(s) that you want to allow logins from, run "ssh-keygen > -t rsa" to generate a key pair, if you haven't already. Then copy the > contents of ~/.ssh/id-rsa.pub into ~/.ssh/authorized_keys on your home > server. These keys are used to authenticate the remote system, in lieu > of a password or physical token. You could put these keys on a USB > stick instead, if you didn't want to keep them permanently on the remote > hosts. > > 3. Disable SSHv1 protocol support in /etc/ssh/sshd_config: "Protocol 2", > not "Protocol 2,1". SSHv1 has known weaknesses. Boggles my mind that > it's still enabled by default.... > > 4. Same file, set "PermitRootLogin no" if it isn't already. > > (Aside: I also like to set up sudo with one account allowed to do > anything, then lock the root account, so the only way to get root access > is to log in as a regular user then sudo up, reducing the risk of > passwordless keys.) > > Having done all this, you're ready to allow remote access: > > 5. In your router, forward a high-numbered port to 22 on the server. If > it's not smart enough to use different port numbers on either side, you > can change the sshd configuration so it listens on a different port > instead. I like to use 22022 for this. > > This is *not* security through obscurity. It's simply a way to reduce > the amount of log spam you have to dig through when monitoring your > system's behavior. Everything that appears in your logs should be > *interesting*. Constant port knocking from worms and script kiddies is > not interesting. > > In case you've not done ssh tunelling, Anne, the command that does what > you want, having done all the above is: > > $ ssh -p22022 -L10143:my.server.com:143 anne(a)my.server.com > > This sets up port 10143 on the local system to be redirected through the > ssh session to the IMAP port on your home server. You don't want to > redirect 143 to 143 because that would require you to run ssh as root. > It also prevents you from using this on a system that itself has an IMAP > server. > > With the tunnel up, you can set up your mail client to connect to port > 10143 on localhost, and you'll be looking at your remote mail server. Hello again. You were kind enough to give me this advice last December. I've another holiday approaching and thought it was time that I got this sorted. Unfortunately, I'm not sure that I can do this, so I'm asking your opinion. My router is a Netgear DG834G. I can create a service, tell it which ports to open, and say which local IP I want it sent to. However, I can't see any way to set the port to which it should be forwarded as anything other than the incoming port. IOW, I can enable the new service Ext-ssh, which accepts incoming traffic on port 22022, and direct it to my server on 192.168.0.40, but I can't see how to make it send that traffic to port 22 on the server. Am I totally misunderstanding this? Really all I want is to be able to log in to the server if I get an email alert that there is a problem or security updates pending. If I can get this sorted, I'll look again at how to route the IMAP mail through the tunnel too. Anne -- New to KDE4? - get help from http://userbase.kde.org Just found a cool new feature? Add it to UserBase

3 9

Broken link in the documentation.
by Marcelo M. Garcia 26 Mar '09

26 Mar '09

Hi There is a broken link in the documentation of CentOS 5.2. I was reading about e-mail and when you follow the link from POP (24.1.2.1 in Deployment guide) to IMAP, you got the following message: "Not Found The requested URL /docs/5/html/5.2/Deployment_Guide/s3-email-protocols-imap.html was not found on this server." Cheers Marcelo

2 1

Help with GSM or CDMA hardware on CentOS and SMSTools question please
by Carel Lubbe 26 Mar '09

26 Mar '09

Hi everyone, I would realy appreciate your help and guidense with a problem I have. Im trying to set up a SMS Gateway as a alert system for my network. Although the Aircard is picked up as a usb device and has a driver in the kernel, it does not have a /dev/XXX device name. So my question is how do I create this /dev/XXX device and make it persistent. I have installed CentOS as my base with smstools-3.0.10-4.el5.i386.rpm as my application. [root@odie ~]# cat /etc/redhat-release CentOS release 5.2 (Final) [root@odie ~]# uname -rvpi 2.6.18-92.1.22.el5 #1 SMP Tue Dec 16 12:03:43 EST 2008 i686 i386 [root@odie ~]# rpm -qa | grep smstools smstools-3.0.10-4.el5 The config file for this software looks like this [root@odie ~]# cat /etc/smsd.conf # Example smsd.conf. Read the manual for a description # #devices = (eg. GSM1) #logfile = /var/log/smsd.log #loglevel = 7 # #[GSM1] #device = /dev/ttyS0 #incoming = yes #pin = 1111 # devices = (eg. CDMA1 or GSM1) logfile = /var/log/smsd.log loglevel = 5 [CDMA1] device = /dev/ttyUSB0 <==== How do I check this and what about after a reboot ... can I force it to stay the same? incoming = yes baudrate = 115200 The hardware is a Compaq nc 8000 laptop (The laptop will be located in my server room ...) I have installed a Mobile broadband data PCMCIA card ==> Sierra Wireless AirCard 580 from our local telecom provider [root@odie ~]# lspcmcia Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:02:06.0) Socket 1 Bridge: [yenta_cardbus] (bus ID: 0000:02:06.1) CardBus card -- see "lspci" for more information Socket 2 Bridge: [yenta_cardbus] (bus ID: 0000:02:06.3) [root@odie ~]# lspci 00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03) 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) 01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] 02:06.0 CardBus bridge: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller 02:06.1 CardBus bridge: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller 02:06.2 System peripheral: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator 02:06.3 CardBus bridge: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller 02:0d.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) 02:0e.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M_2 Gigabit Ethernet (rev 03) 05:00.0 USB Controller: Agere Systems USS-312 USB Controller (rev 10) [root@odie ~]# lsmod Module Size Used by airprime 12229 0 usbserial 33065 1 airprime [root@odie ~]# lsusb Bus 002 Device 006: ID 1199:0112 Sierra Wireless, Inc. CDMA 1xEVDO PC Card, AirCard 580 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 005 Device 001: ID 0000:0000 Here is a list of all my /dev/ devices.... The aircard does not exist here [root@odie ~]# ls /dev/ adsp disk fd0u1040 fd0u830 initctl MAKEDEV parport2 ram14 root tty1 tty21 tty33 tty45 tty57 ttyS2 usbdev2.6_ep00 vcs1 X0R agpgart dsp fd0u1120 floppy input mapper parport3 ram15 rtc tty10 tty22 tty34 tty46 tty58 ttyS3 usbdev2.6_ep05 vcs2 zero audio dsp1 fd0u1440 floppy-fd0 kmsg md0 port ram2 sequencer tty11 tty23 tty35 tty47 tty59 ttyUSB0 usbdev2.6_ep0b vcs3 audio1 dvd fd0u1680 full log mem ppp ram3 sequencer2 tty12 tty24 tty36 tty48 tty6 ttyUSB1 usbdev2.6_ep81 vcs4 bus dvd-hdb fd0u1722 gpmctl loop0 mixer ptmx ram4 shm tty13 tty25 tty37 tty49 tty60 ttyUSB2 usbdev2.6_ep82 vcs5 cdrom dvdrw fd0u1743 hda loop1 mixer1 pts ram5 snapshot tty14 tty26 tty38 tty5 tty61 ttyUSB3 usbdev2.6_ep8a vcs6 cdrom-hdb dvdrw-hdb fd0u1760 hda1 loop2 net ram ram6 snd tty15 tty27 tty39 tty50 tty62 ttyUSB4 usbdev3.1_ep00 vcsa cdrw dvdwriter fd0u1840 hda2 loop3 null ram0 ram7 stderr tty16 tty28 tty4 tty51 tty63 ttyUSB5 usbdev3.1_ep81 vcsa1 cdrw-hdb dvdwriter-hdb fd0u1920 hda3 loop4 nvram ram1 ram8 stdin tty17 tty29 tty40 tty52 tty7 urandom usbdev4.1_ep00 vcsa2 cdwriter fb fd0u360 hda4 loop5 oldmem ram10 ram9 stdout tty18 tty3 tty41 tty53 tty8 usbdev1.1_ep00 usbdev4.1_ep81 vcsa3 cdwriter-hdb fb0 fd0u720 hda5 loop6 par0 ram11 ramdisk systty tty19 tty30 tty42 tty54 tty9 usbdev1.1_ep81 usbdev5.1_ep00 vcsa4 console fd fd0u800 hdb loop7 parport0 ram12 random tty tty2 tty31 tty43 tty55 ttyS0 usbdev2.1_ep00 usbdev5.1_ep81 vcsa5 core fd0 fd0u820 hpet lp0 parport1 ram13 rawctl tty0 tty20 tty32 tty44 tty56 ttyS1 usbdev2.1_ep81 vcs vcsa6

1 0

CentOS won't shutdown ... or do anything else
by hadrian＠hushmail.com 25 Mar '09

25 Mar '09

I started to have problems similar to ones described in the past on this list but could not find any kind of resolution. I did an lsmod, a mount command, and for fun, did an strace on shutdown to see where it is hanging, and an ltrace as well. Any thoughts? Module Size Used by parport_pc 28033 0 lp 15661 0 parport 38153 2 parport_pc,lp autofs4 26053 0 i2c_dev 14529 0 i2c_core 26305 1 i2c_dev sg 38369 0 sunrpc 144805 1 crc32c 5953 8 libcrc32c 6721 1 crc32c iscsi_sfnet 85073 38 scsi_transport_iscsi 12737 1 iscsi_sfnet dm_multipath 23625 0 emcpdm 39652 0 emcpgpx 20260 1 emcpdm emcpmpx 158136 48 emcp 1046804 3 emcpdm,emcpgpx,emcpmpx emcplib 6656 1 emcp button 10705 0 battery 12997 0 ac 8901 0 md5 8129 1 ipv6 243809 32 joydev 14465 0 uhci_hcd 33241 0 ehci_hcd 33353 0 i5000_edac 13121 0 edac_mc 29705 1 i5000_edac bnx2 141661 0 qla2300 130113 0 mptscsih 5569 0 ata_piix 19781 0 libata 106013 1 ata_piix dm_snapshot 21221 0 dm_zero 6337 0 dm_mirror 32453 0 ext3 119753 6 jbd 59865 1 ext3 dm_mod 66921 11 dm_multipath,dm_snapshot,dm_zero,dm_mirror qla2322 141377 0 qla2400 234945 0 qla2xxx 175333 15 qla2300,qla2322,qla2400 scsi_transport_fc 12353 1 qla2xxx megaraid_sas 38001 4 mptsas 26069 1 mptscsih mptfc 12997 0 mptspi 14417 1 mptscsih mptscsi 44241 3 mptsas,mptfc,mptspi mptbase 67873 4 mptsas,mptfc,mptspi,mptscsi sd_mod 20545 53 scsi_mod 120653 12 sg,iscsi_sfnet,emcp,libata,qla2xxx,scsi_transport_fc,megaraid_sas,mp tsas,mptfc,mptspi,mptscsi,sd_mod /dev/mapper/VolGroup00-LogVol00 on / type ext3 (rw) none on /proc type proc (rw) none on /sys type sysfs (rw) none on /dev/pts type devpts (rw,gid=5,mode=620) usbfs on /proc/bus/usb type usbfs (rw) /dev/sda2 on /boot type ext3 (rw) none on /dev/shm type tmpfs (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) /dev/emcpowerd on /EMC/SATA/AX4-5i/LUN0 type ext3 (rw,_netdev,noatime) /EMC/SATA/AX4-5i/LUN0/path/var/spool/postfix on /var/spool/postfix type ext3 (rw,bind,_netdev,noatime) /dev/emcpowerk on /EMC/SATA/AX4-5i/LUN4 type ext3 (rw,_netdev,noatime) /EMC/SATA/AX4-5i/LUN4 on <path> type ext3 (rw,bind,_netdev,noatime) /dev/emcpowerg on /EMC/SATA/AX4-5i/LUN5 type ext3 (rw,_netdev,noatime) /dev/emcpowerj on /EMC/SATA/AX4-5i/LUN6 type ext3 (rw,_netdev,noatime) execve("/sbin/shutdown", ["shutdown", "-r", "now"], [/* 29 vars */]) = 0 uname({sys="Linux", node="host.dom", ...}) = 0 brk(0) = 0x9030000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=102323, ...}) = 0 old_mmap(NULL, 102323, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f4a000 close(3) = 0 open("/lib/tls/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\320\336"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1525004, ...}) = 0 old_mmap(0x3d9000, 1223900, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x3d9000 old_mmap(0x4fe000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x124000) = 0x4fe000 old_mmap(0x502000, 7388, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x502000 close(3) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f49000 mprotect(0x4fe000, 8192, PROT_READ) = 0 mprotect(0x3d0000, 4096, PROT_READ) = 0 set_thread_area({entry_number:-1 -> 6, base_addr:0xb7f49aa0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0 munmap(0xb7f4a000, 102323) = 0 getuid32() = 0 geteuid32() = 0 setuid32(0) = 0 getuid32() = 0 brk(0) = 0x9030000 brk(0x9051000) = 0x9051000 open("/var/run/shutdown.pid", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=6, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, - 1, 0) = 0xb7f62000 read(3, "30314\n", 4096) = 6 close(3) = 0 munmap(0xb7f62000, 4096) = 0 kill(30314, SIG_0) = -1 ESRCH (No such process) unlink("/var/run/shutdown.pid") = 0 umask(022) = 022 open("/var/run/shutdown.pid", O_WRONLY|O_CREAT|O_TRUNC, 0666) = 3 getpid() = 30317 fstat64(3, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, - 1, 0) = 0xb7f62000 write(3, "30317\n", 6) = 6 close(3) = 0 munmap(0xb7f62000, 4096) = 0 rt_sigaction(SIGQUIT, {SIG_IGN}, {SIG_DFL}, 8) = 0 rt_sigaction(SIGCHLD, {SIG_IGN}, {SIG_DFL}, 8) = 0 rt_sigaction(SIGHUP, {SIG_IGN}, {SIG_DFL}, 8) = 0 rt_sigaction(SIGTSTP, {SIG_IGN}, {SIG_DFL}, 8) = 0 rt_sigaction(SIGTTIN, {SIG_IGN}, {SIG_DFL}, 8) = 0 rt_sigaction(SIGTTOU, {SIG_IGN}, {SIG_DFL}, 8) = 0 rt_sigaction(SIGINT, {0x8049938, [], SA_RESTORER|SA_RESTART, 0x400898}, NULL, 8) = 0 chdir("/") = 0 getuid32() = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 open("/etc/nsswitch.conf", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=1623, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, - 1, 0) = 0xb7f62000 read(3, "#\n# /etc/nsswitch.conf\n#\n# An ex"..., 4096) = 1623 read(3, "", 4096) = 0 close(3) = 0 munmap(0xb7f62000, 4096) = 0 open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=102323, ...}) = 0 old_mmap(NULL, 102323, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f4a000 close(3) = 0 open("/lib/libnss_files.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\20\33\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=47468, ...}) = 0 old_mmap(NULL, 41608, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x2fa000 old_mmap(0x303000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8000) = 0x303000 close(3) = 0 mprotect(0x303000, 4096, PROT_READ) = 0 munmap(0xb7f4a000, 102323) = 0 open("/etc/passwd", O_RDONLY) = 3 fcntl64(3, F_GETFD) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=2778, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, - 1, 0) = 0xb7f62000 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 2778 close(3) = 0 munmap(0xb7f62000, 4096) = 0 ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 readlink("/proc/self/fd/0", "/dev/pts/4", 4095) = 10 time(NULL) = 1238017686 open("/etc/localtime", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=1017, ...}) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=1017, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, - 1, 0) = 0xb7f62000 read(3, "TZif\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\4\0\0\0\4\0"..., 4096) = 1017 close(3) = 0 munmap(0xb7f62000, 4096) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0xb7f49ae8) = 30318 time(NULL) = 1238017686 stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=1017, ...}) = 0 stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=1017, ...}) = 0 stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=1017, ...}) = 0 socket(PF_FILE, SOCK_DGRAM, 0) = 3 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 connect(3, {sa_family=AF_FILE, path="/dev/log"}, 16) = 0 send(3, "<13>Mar 25 14:48:06 shutdown: sh"..., 61, MSG_NOSIGNAL <unfinished ...> _start(0xbff00640, 0xbff00649, 0xbff0064c, 0, 0xbff00650 <unfinished ...> __libc_start_main(0x8049ffc, 3, 0xbfe01174, 0x804acac, 0x804ad00 <unfinished ...> getuid() = 0 geteuid() = 0 setuid(0) = 0 getuid() = 0 getopt(3, 0xbfe01174, "acqkrhnfFyt:g:i:") = 114 getopt(3, 0xbfe01174, "acqkrhnfFyt:g:i:") = -1 fopen("/var/run/shutdown.pid", "r") = 0x94ad008 fscanf(0x94ad008, 0x804adf0, 0xbfe00eac, 0, 81) = 1 fclose(0x94ad008) = 0 kill(30365, 0) = -1 unlink("/var/run/shutdown.pid") = 0 umask(022) = 022 fopen("/var/run/shutdown.pid", "w") = 0x94ad008 getpid() = 30451 fprintf(0x94ad008, "%d\n", 30451) = 6 fclose(0x94ad008) = 0 signal(3, 0x1) = NULL signal(17, 0x1) = NULL signal(1, 0x1) = NULL signal(20, 0x1) = NULL signal(21, 0x1) = NULL signal(22, 0x1) = NULL sigaction(2, 0xbfe00eb0, NULL) = 0 chdir("/") = 0 strchr("0", ':') = NULL __strtol_internal("0", NULL, 10) = 0 strncat(0xbfe00cb0, 0x804c960, 319, 0, 0) = 0xbfe00cb0 snprintf("\rThe system is going down for re"..., 320, "\rThe system is going down %s NO"..., "for reboot") = 43 getuid() = 0 getpwuid(0, 0x46478f, 0xbfe00c98, 0x80494e9, 0x3d0fd4) = 0x5020bc strncat(0x804c840, 0x94ad008, 31, 0xbfe00cb1, 0x3d0fd4) = 0x804c840 ttyname(0) = "/dev/pts/4" sprintf("(pts/4) ", "(%.28s) ", "pts/4") = 8 time(0xbfe00af4) = 1238018002 ctime(0xbfe00af4) = "Wed Mar 25 14:53:22 2009\n" snprintf("\007\r\nBroadcast message from root ("..., 81, "\007\r\nBroadcast message from %"..., "root", "(pts/4) ") = 70 fork( Broadcast message from root (pts/4) (Wed Mar 25 14:53:22 2009): The system is going down for reboot NOW! ) = 30452 openlog("shutdown", 4, 8) = <void> syslog(5, "shutting down for system reboot" -- Become a medical transcriptionist at home, at your own pace. http://tagline.hushmail.com/fc/BLSrjkqfMmeLwBnPlPu3jmrCxuyZBMvKFibhY6JYoa8K…

1 0

ISPConfig & local administration
by Sam Drinkard 25 Mar '09

25 Mar '09

Hi list, I recently installed a package for Centos5.2 called ISPConfig. This was recommended by a buddy of mine who hosts a number of websites for various clients. Although I don't host any websites except my own, there were some features in the package that I did like the looks of. Well, today, I needed to add a new user and group, so while the machine was sitting here, I attempted to use the gui to adduser. For some reason, the process hung and never did come up. I called my buddy about that and he told me we ran through that same scenario with his machine some time back, but I had forgotten about it. The processes were shown in a ps ax as being ready to run, but again, nothing appeared on the monitor. I suspect the ispconfig somehow disables some of, if not all the built in adminstrative functions of the Centos gui, but hoped someone could prove / disprove this fact. It's rather irritating to go thru a manual user creation for me, as cli is not my strong point under Centos. I wound up using webmin to create the user and set the group for the gempak user, and then manually edited the list of allowed users in the gempak group. One thing of note, and not sure it even matters, but I got some messages like this... "Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0. Then, it wrote out the same thing for position 1 and position 2, with then a warning that python-dbus not installed. I do know there apparently is a difference in python-dbus and dbus-python. Thanks for any input.. Sam

1 0

freeradius version
by Kanwar Ranbir Sandhu 25 Mar '09

25 Mar '09

Hi All, The freeradius version in CentOS 5 is ancient, so I've been considering rebuilding the Fedora 10 rpm for freeradius-2.1.3 on CentOS. That means I'll have to maintain the package, and I'm not an uber packager. Normally I wouldn't care, but in this case I do because the freeradius server is going to be critical. So, should I rebuild the F10 rpm, or should I just stick with the version in CentOS 5? Based on what I'm reading, moving to a newer release would be wise. Regards, Ranbir -- Kanwar Ranbir Sandhu Linux 2.6.27.19-170.2.35.fc10.x86_64 x86_64 GNU/Linux 11:37:20 up 19 days, 11:03, 4 users, load average: 0.17, 0.22, 0.18

6 13

looking for some advice to monitor network usage in office
by Rudi Ahlers 25 Mar '09

25 Mar '09

Hi all, I've been asked by a college to setup a monitor to monitor a Windows network, but on internet usage. They want to have detailed usage, i.e. on a per IP / PC basis, and if possible to get stats for every protocol, and see over a period of time what goes on. My first though wat ntop, which does all of this, but it doesn't save the data in a DB, so if the server reboots the stats are reset to 0. I also can't get Cacti to give me stats per IP & per protocol (unless someone knows how todo this). I don't yet know the full network layout, but I have a feeling they're using ADSL, and have a Windows Small Business server with ISA, and possible Exchange as well. So, I'm either going to put a CentOS box between the Windows box & ADSL router, or maybe even setup a CentOS Vmware Virtual PC, force all the network to route via the VPS. Does anyone have some suggestions / experience in setting up something like this? P.S. Please don't look at the fact that there's Windows on the network. I use Linux for business purposes, not as a hobby, and we also use Mac & Windows where the situation calls for it. -- Kind Regards Rudi Ahlers

8 7

Samba packages update
by Veiko Kukk 25 Mar '09

25 Mar '09

I'm unable to find this http://rhn.redhat.com/errata/RHBA-2009-0180.html package update in Centos 5.2 updates. Why? --- Veiko

3 3

Dock an application in system tray
by Senthilraj 25 Mar '09

25 Mar '09

Hi, Im using CentOS 4.4 , and wanted to dock an application into my System tray(without using any external tool like Alldock, etc,.). Thanks, Senthilraj

1 0

Limiting maildir sizes with Postfix?
by Xn Nooby 24 Mar '09

24 Mar '09

I have a small Squirrelmail server, using Postfix & Dovecot. I am trying to limit the amount of mail a user can get. The "mailbox_size_limit" value does not seem to be being honored. I am using the Maildir directory format. >From googling, it appears that "mailbox_size_limit" applies to a single file (mbox format?), and that it does not work with Maildirs. Is this correct? How should I limit the Mailbox size of the users? I'm not very familiar with Linux "quotas", but I think that is my only other choice.

3 2

update yum
by madunix 24 Mar '09

24 Mar '09

Am trying to update my wine i get the following .. [] download]# yum update wine* Loading "priorities" plugin Loading "fastestmirror" plugin Loading mirror speeds from cached hostfile * epel: ftp.nluug.nl * rpmforge: fr2.rpmfind.net * base: ftp.halifax.rwth-aachen.de * updates: ftp.halifax.rwth-aachen.de * addons: ftp.halifax.rwth-aachen.de * extras: ftp.halifax.rwth-aachen.de 0 packages excluded due to repository priority protections Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package wine-cms.i386 0:1.0.1-1.el5.rf set to be updated ---> Package wine-jack.i386 0:1.0.1-1.el5.rf set to be updated --> Processing Dependency: wine-core = 1.0.1-1.el5 for package: wine-tools --> Processing Dependency: wine-core = 1.0.1-1.el5 for package: wine-desktop ---> Package wine-ldap.i386 0:1.0.1-1.el5.rf set to be updated ---> Package wine-twain.i386 0:1.0.1-1.el5.rf set to be updated ---> Package wine-core.i386 0:1.0.1-1.el5.rf set to be updated ---> Package wine.i386 0:1.0.1-1.el5.rf set to be updated ---> Package wine-esd.i386 0:1.0.1-1.el5.rf set to be updated ---> Package wine-nas.i386 0:1.0.1-1.el5.rf set to be updated ---> Package wine-capi.i386 0:1.0.1-1.el5.rf set to be updated --> Running transaction check --> Processing Dependency: wine-core = 1.0.1-1.el5 for package: wine-desktop --> Finished Dependency Resolution Error: Missing Dependency: wine-core = 1.0.1-1.el5 is needed by package wine-desktop Thanks

5 7

mmonit - Permission denied errot
by Rajagopal Swaminathan 24 Mar '09

24 Mar '09

Greetings, I just downloaded the mmonit from mmonit.com site on my CentOS box untarred-unizipped it. As per the documentation, I dutifully typed ./bin/mmonit and it is refusing to run. I am running this as root and SELinux is disabled. running it with strace spews the following (in entireity): [begin] # strace ./bin/mmonit execve("./bin/mmonit", ["./bin/mmonit"], [/* 28 vars */]) = -1 EACCES (Permission denied) dup(2) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fstat64(3, {st_mode=S_IFCHR|0600, st_rdev=makedev(136, 2), ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7fed000 _llseek(3, 0, 0xbfd7e7b4, SEEK_CUR) = -1 ESPIPE (Illegal seek) write(3, "strace: exec: Permission denied\n", 32strace: exec: Permission denied ) = 32 close(3) = 0 munmap(0xb7fed000, 4096) = 0 exit_group(1) = ? [end strace] What am I missing here? Thanks and Regards Rajagopal

3 3

Is there a web-based server status package?
by Xn Nooby 24 Mar '09

24 Mar '09

I have a small squirrelmail server using Postfix & Dovecot, and I would like to add a web-based "status" screen to remotely check its health. Is there a preferred packaged for doing this? I mostly want to monitor disk space usage, and CPU utilization.

4 4

question about top output
by Greenseid, Joseph M (IS) 24 Mar '09

24 Mar '09

hi all, below is the output of top off a machine i have, sorted by CPU utilization. my question is, how can all 8 CPUs say they're pegged at 100% user utilization, when there are just these 8 processes saying they're using 25% of a CPU each, and no other processes showing up taking any resources? i have run this test on other machines and they act as expected. i found this b/c this node was running a lot slower for some reason, and i can't figure out why. there are no error messages anywhere... top - 00:16:34 up 8 days, 2:05, 1 user, load average: 8.40, 8.31, 8.24 Tasks: 156 total, 9 running, 147 sleeping, 0 stopped, 0 zombie Cpu0 : 97.2%us, 1.4%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 1.4%si, 0.0%st Cpu1 :100.0%us, 0.0%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu2 :100.0%us, 0.0%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu3 : 98.6%us, 1.4%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu4 :100.0%us, 0.0%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu5 : 98.6%us, 0.0%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 1.4%si, 0.0%st Cpu6 :100.0%us, 0.0%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu7 :100.0%us, 0.0%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 16424052k total, 13900392k used, 2523660k free, 10560k buffers Swap: 499988k total, 152k used, 499836k free, 28700k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 8568 jgreen 25 0 2089m 1.7g 4184 R 23 10.5 109:06.90 xhpl 8572 jgreen 25 0 2080m 1.6g 4184 R 23 10.5 109:12.40 xhpl 8574 jgreen 25 0 2079m 1.6g 4220 R 23 10.5 109:07.43 xhpl 8575 jgreen 25 0 2063m 1.6g 4168 R 23 10.4 109:08.12 xhpl 8570 jgreen 25 0 2084m 1.6g 4188 R 23 10.5 109:07.52 xhpl 8571 jgreen 25 0 2067m 1.6g 4188 R 23 10.4 109:08.51 xhpl 8569 jgreen 25 0 2072m 1.6g 4196 R 22 10.4 109:07.77 xhpl 8573 jgreen 25 0 2062m 1.6g 4204 R 22 10.4 109:08.23 xhpl 4457 root 15 0 12056 1424 992 S 0 0.0 8:01.62 pbs_mom 1 root 15 0 10316 792 660 S 0 0.0 0:02.74 init 2 root RT -5 0 0 0 S 0 0.0 0:00.01 migration/0 3 root 34 19 0 0 0 S 0 0.0 0:00.01 ksoftirqd/0 4 root RT -5 0 0 0 S 0 0.0 0:00.02 watchdog/0 5 root RT -5 0 0 0 S 0 0.0 0:00.00 migration/1 6 root 34 19 0 0 0 S 0 0.0 0:00.00 ksoftirqd/1 thanks, --Joe

4 8

CentOS-announce Digest, Vol 49, Issue 10
by centos-announce-request＠centos.org 24 Mar '09

24 Mar '09

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2009:0341-01: Low CentOS 2 i386 Moderate security update (John Newbigin) ---------------------------------------------------------------------- Message: 1 Date: Tue, 24 Mar 2009 15:11:36 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2009:0341-01: Low CentOS 2 i386 Moderate security update To: centos-announce(a)centos.org Message-ID: <49C85D78.2050408(a)ict.swin.edu.au> Content-Type: text/plain; charset=ISO-8859-1; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2009:0341-01 Moderate: curl security update Files available: curl-7.8-3.rhel2.i386.rpm curl-devel-7.8-3.rhel2.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin ITS Senior Analyst / Programmer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 49, Issue 10 ***********************************************

1 0

Re: [CentOS] hplip problems - configure: error: "cannot find libjpeg support"
by Anne Wilson 24 Mar '09

24 Mar '09

On Sunday 08 March 2009 20:58, you wrote: > yes, the "yum list" output shows both installed and available (from > the repos you have configured). if not installed it shows the repo - > e.g., "base", "rpmforge". so, if you're is showing installed there's > something else going on. is it complaining about dbus-python in > general, or is it giving a version/release-specific error? # hp-setup warning: python-dbus not installed. HP Linux Imaging and Printing System (ver. 3.9.2) Printer/Fax Setup Utility ver. 8.0 <snip> (Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.) Using connection type: usb error: No device selected/specified or that supports this functionality. That is correct. The printer in question is a networked one, and I would expect to have to set it in hp-setup. It works from other boxes with more recent distros. > there's > also: > > rpm -qa dbus-python\* > > to check that something is installed. That simply returns dbus-python-0.70-7.el5 Anne

4 17

SATA tape drive on 4.7
by C Linus Hicks 24 Mar '09

24 Mar '09

I have gotten a hard system lockup several times using star on my system with a Quantum DLT-V4 SATA tape drive. I am including what got recorded in /var/log/messages from the most recent event showing stack trace. Output from uname -a: Linux lh10 2.6.9-78.0.13.ELsmp #1 SMP Wed Jan 14 15:55:36 EST 2009 x86_64 x86_64 x86_64 GNU/Linux Mar 22 22:02:59 lh10 kernel: Bad page state at free_hot_cold_page (in process 'star', page 00000102382b1ec8) Mar 22 22:02:59 lh10 kernel: flags:0x0100000c mapping:00000102146a4240 mapcount:2 count:0 Mar 22 22:02:59 lh10 kernel: Backtrace: Mar 22 22:02:59 lh10 kernel: Mar 22 22:02:59 lh10 kernel: Call Trace:<ffffffff8015f0cf>{bad_page+112} <ffffffff8015f7b1>{free_hot_cold_page+130} Mar 22 22:02:59 lh10 kernel: <ffffffffa00d17b8>{:st:sgl_unmap_user_pages+67} <ffffffffa00d17df>{:st:release_buffering+27} Mar 22 22:02:59 lh10 kernel: <ffffffffa00d6196>{:st:st_write+2692} <ffffffff80194b39>{inode_update_time+159} Mar 22 22:02:59 lh10 kernel: <ffffffff8017beaa>{vfs_write+207} <ffffffff8017bf92>{sys_write+69} Mar 22 22:02:59 lh10 kernel: <ffffffff801102f6>{system_call+126} Mar 22 22:02:59 lh10 kernel: Trying to fix it up, but a reboot is needed Mar 22 22:02:59 lh10 kernel: Bad page state at free_hot_cold_page (in process 'star', page 000001023eb70ed8) Mar 22 22:02:59 lh10 kernel: flags:0x0100000c mapping:00000102146a4240 mapcount:2 count:0 Mar 22 22:02:59 lh10 kernel: Backtrace: Mar 22 22:02:59 lh10 kernel: Mar 22 22:02:59 lh10 kernel: Call Trace:<ffffffff8015f0cf>{bad_page+112} <ffffffff8015f7b1>{free_hot_cold_page+130} Mar 22 22:02:59 lh10 kernel: <ffffffffa00d17b8>{:st:sgl_unmap_user_pages+67} <ffffffffa00d17df>{:st:release_buffering+27} Mar 22 22:02:59 lh10 kernel: <ffffffffa00d6196>{:st:st_write+2692} <ffffffff80194b39>{inode_update_time+159} Mar 22 22:02:59 lh10 kernel: <ffffffff8017beaa>{vfs_write+207} <ffffffff8017bf92>{sys_write+69} Mar 22 22:02:59 lh10 kernel: <ffffffff801102f6>{system_call+126} Mar 22 22:02:59 lh10 kernel: Trying to fix it up, but a reboot is needed Mar 22 22:02:59 lh10 kernel: Bad page state at free_hot_cold_page (in process 'star', page 000001023d3bc220) Mar 22 22:02:59 lh10 kernel: flags:0x0100000c mapping:00000102146a4240 mapcount:2 count:0 Mar 22 22:02:59 lh10 kernel: Backtrace: Mar 22 22:02:59 lh10 kernel: Mar 22 22:02:59 lh10 kernel: Call Trace:<ffffffff8015f0cf>{bad_page+112} <ffffffff8015f7b1>{free_hot_cold_page+130} Mar 22 22:02:59 lh10 kernel: <ffffffffa00d17b8>{:st:sgl_unmap_user_pages+67} <ffffffffa00d17df>{:st:release_buffering+27} Mar 22 22:02:59 lh10 kernel: <ffffffffa00d6196>{:st:st_write+2692} <ffffffff80194b39>{inode_update_time+159} Mar 22 22:02:59 lh10 kernel: <ffffffff8017beaa>{vfs_write+207} <ffffffff8017bf92>{sys_write+69} Mar 22 22:02:59 lh10 kernel: <ffffffff801102f6>{system_call+126} Mar 22 22:02:59 lh10 kernel: Trying to fix it up, but a reboot is needed Mar 22 22:02:59 lh10 kernel: Bad page state at free_hot_cold_page (in process 'star', page 0000010238c68e80) Mar 22 22:02:59 lh10 kernel: flags:0x0100000c mapping:00000102146a4240 mapcount:2 count:0 Mar 22 22:03:00 lh10 kernel: Backtrace: Mar 22 22:03:00 lh10 kernel: Mar 22 22:03:00 lh10 kernel: Call Trace:<ffffffff8015f0cf>{bad_page+112} <ffffffff8015f7b1>{free_hot_cold_page+130} Mar 22 22:03:00 lh10 kernel: <ffffffffa00d17b8>{:st:sgl_unmap_user_pages+67} <ffffffffa00d17df>{:st:release_buffering+27} Mar 22 22:03:00 lh10 kernel: <ffffffffa00d6196>{:st:st_write+2692} <ffffffff80194b39>{inode_update_time+159} Mar 22 22:03:00 lh10 kernel: <ffffffff8017beaa>{vfs_write+207} <ffffffff8017bf92>{sys_write+69} Mar 22 22:03:00 lh10 kernel: <ffffffff801102f6>{system_call+126} Mar 22 22:03:00 lh10 kernel: Trying to fix it up, but a reboot is needed Mar 22 22:03:00 lh10 kernel: Bad page state at free_hot_cold_page (in process 'star', page 000001023c14d570) Mar 22 22:03:00 lh10 kernel: flags:0x0100000c mapping:00000102146a4240 mapcount:2 count:0 Mar 22 22:03:00 lh10 kernel: Backtrace: Mar 22 22:03:00 lh10 kernel: Mar 22 22:03:00 lh10 kernel: Call Trace:<ffffffff8015f0cf>{bad_page+112} <ffffffff8015f7b1>{free_hot_cold_page+130} Mar 22 22:03:00 lh10 kernel: <ffffffffa00d17b8>{:st:sgl_unmap_user_pages+67} <ffffffffa00d17df>{:st:release_buffering+27} Mar 22 22:03:00 lh10 kernel: <ffffffffa00d6196>{:st:st_write+2692} <ffffffff80194b39>{inode_update_time+159} Mar 22 22:03:00 lh10 kernel: <ffffffff8017beaa>{vfs_write+207} <ffffffff8017bf92>{sys_write+69} Mar 22 22:03:00 lh10 kernel: <ffffffff801102f6>{system_call+126} Mar 22 22:03:00 lh10 kernel: Trying to fix it up, but a reboot is needed Mar 22 22:03:00 lh10 kernel: Bad page state at free_hot_cold_page (in process 'X', page 000001023c14d570) Mar 22 22:03:00 lh10 kernel: flags:0x01020008 mapping:00000101ec811360 mapcount:0 count:0 Mar 22 22:03:00 lh10 kernel: Backtrace: Mar 22 22:03:00 lh10 kernel: Mar 22 22:03:00 lh10 kernel: Call Trace:<ffffffff8015f0cf>{bad_page+112} <ffffffff8015f7b1>{free_hot_cold_page+130} Mar 22 22:03:00 lh10 kernel: <ffffffff8015f86a>{__pagevec_free+39} <ffffffff80165a5d>{release_pages+366} Mar 22 22:03:01 lh10 kernel: <ffffffff8016d921>{__vma_link+66} <ffffffff8016dd53>{vma_adjust+815} Mar 22 22:03:01 lh10 kernel: <ffffffff80165e4b>{__pagevec_mark_accessed+394} <ffffffff80166091>{lru_add_drain+91} Mar 22 22:03:01 lh10 kernel: <ffffffff8016e971>{do_munmap+355} <ffffffff8016f55e>{sys_brk+136} Mar 22 22:03:01 lh10 kernel: <ffffffff801102f6>{system_call+126} Mar 22 22:03:01 lh10 kernel: Trying to fix it up, but a reboot is needed star had been running about 20 to 30 minutes at the time of the crash. I have seen two or three crashes previously all denoting "Bad page state at free_hot_cold_page." This appears to have been reported as a bug in 2.6.12: https://lists.linux-foundation.org/pipermail/bugme-new/2005-August/012862.h… It was updated March 10, 2008 as rejected unreproducible. I have seen the problem three times in three days now without trying to reproduce it. Can I get any help on getting a fix? Linus

2 3

Disks do not mount at boot
by Theo Band 24 Mar '09

24 Mar '09

I have a problem with two entries in my /etc/fstab. When I boot the machine, the disks are not mounted. When I give mount -a, all disks are present without an error. Of course I don't want to manually do that after each reboot. What can be the problem? CentOS 5.2 cat /etc/fstab /dev/vg/centos / ext3 defaults 1 1 LABEL=/boot /boot ext3 defaults 1 2 LABEL=zele_common /dczele01/ ext3 defaults 1 2 LABEL=users /dczele01/users ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/vg/swap swap swap defaults 0 0 arend:/home /home nfs proto=tcp,nfsvers=3,bg,defaults 0 0 arend:/program /program nfs proto=tcp,nfsvers=3,bg,defaults 0 0 Instead of LABEL I also tried to use the device /dev/vg2/users. The filesystem is created on a logical volume, part of a new volume group: lvs LV VG Attr LSize Origin Snap% Move Log Copy% Convert centos vg -wi-ao 6.91G swap vg -wi-ao 992.00M users vg2 -wi-ao 50.00G zele_common vg2 -wi-ao 100.00G After booting /etc/mtab and mount do not list the /dczele01 entries. In the log I see these lines: Mar 24 08:42:02 fsutrecht kernel: md: Autodetecting RAID arrays. Mar 24 08:42:02 fsutrecht kernel: md: autorun ... Mar 24 08:42:02 fsutrecht kernel: md: ... autorun DONE. Mar 24 08:42:02 fsutrecht kernel: device-mapper: multipath: version 1.0.5 loaded Mar 24 08:42:02 fsutrecht kernel: EXT3 FS on dm-0, internal journal Mar 24 08:42:02 fsutrecht kernel: kjournald starting. Commit interval 5 seconds Mar 24 08:42:02 fsutrecht kernel: EXT3 FS on sda1, internal journal Mar 24 08:42:02 fsutrecht kernel: EXT3-fs: mounted filesystem with ordered data mode. Mar 24 08:42:03 fsutrecht kernel: kjournald starting. Commit interval 5 seconds Mar 24 08:42:03 fsutrecht kernel: EXT3 FS on dm-3, internal journal Mar 24 08:42:03 fsutrecht kernel: EXT3-fs: mounted filesystem with ordered data mode. Mar 24 08:42:03 fsutrecht kernel: kjournald starting. Commit interval 5 seconds Mar 24 08:42:03 fsutrecht kernel: EXT3 FS on dm-2, internal journal Mar 24 08:42:03 fsutrecht kernel: EXT3-fs: mounted filesystem with ordered data mode. Mar 24 08:42:03 fsutrecht kernel: Adding 1015800k swap on /dev/vg/swap. Priority:-1 extents:1 across:1015800k Then I give a mount -a and see this in the log: Mar 24 08:44:28 fsutrecht kernel: kjournald starting. Commit interval 5 seconds Mar 24 08:44:28 fsutrecht kernel: EXT3 FS on dm-3, internal journal Mar 24 08:44:28 fsutrecht kernel: EXT3-fs: mounted filesystem with ordered data mode. Mar 24 08:44:28 fsutrecht kernel: kjournald starting. Commit interval 5 seconds Mar 24 08:44:28 fsutrecht kernel: EXT3 FS on dm-2, internal journal Mar 24 08:44:28 fsutrecht kernel: EXT3-fs: mounted filesystem with ordered data mode. So from the log it looks like the mount is done, but nothing is actually mounted. I'm puzzled. The nfs shares and the /boot drive are mounted correctly. So what could cause these two shares to not mount automatically? What else can I do to debug? Thanks, Theo

1 1

How to add ClamAV to Postfix?
by Xn Nooby 24 Mar '09

24 Mar '09

I sent this email to the Rehdat list, but I thought the Centos users might be more inclined to have the command-line solution I am looking for, so I thought I would post it here too: I would like to add anti-virus to my email server. Currently I have Postfix, Dovecot, PHP, and Squirrelmail installed. The users only use Squirrelmail to access mail. I am looking for command-line instructions, since I have limited access to the server itself (I am using SSH). ClamAV seems to be most common linux AV package, so I assume I should be using that. I'm not sure if I should be using Amavisd or MailScanner, or neither. I believe I need one of them to act as the glue that connects Postfix to ClamAV. Apparently none of these packages (Amavisd/MailScanner/ClamAV) are part of RHEL5, so I have to get the RPMS from somewhere else. Is there some standard way of adding AV to Postfix?

9 13

help needed with DNS server
by Rudi Ahlers 23 Mar '09

23 Mar '09

Hi all, I'm setting up a DNS server on CentOS 5.2, but can't get it to listen to the outside IP address for DNS queries. There's no firewall installed yet. Here's the BIND config options: options { /* make named use port 53 for the source of all queries, to allow * firewalls to block all ports except 53: */ query-source port 53; // Put files that named is allowed to write in the data/ directory: directory "/var/named"; // the default dump-file "data/cache_dump.db"; statistics-file "data/named_stats.txt"; /* memstatistics-file "data/named_mem_stats.txt"; */ }; Yet, it only listes on 127.0.0.1 netstat -tulpn | grep :53 Stopping named: [ OK ] Starting named: [ OK ] tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN 28979/named tcp 0 0 ::1:53 :::* LISTEN 28979/named udp 0 0 127.0.0.1:53 0.0.0.0:* 28979/named udp 0 0 ::1:53 :::* 28979/named What am I missing? -- Kind Regards Rudi Ahlers

4 4

Form to mail script generators for Linux?
by Linda Stark 23 Mar '09

23 Mar '09

Hi, I am trying to find out if there are any Linux based “form to mail” php script generators available, that would generate the script needed to profess web mail forms such as a “contact us” page or a “mail us” page on a web site. There was one in patricular I was looking at that is windows based, called “Forms To Go”, a commercial package, which from what I have gathered is the most popular in it’s class and apparently it generates secure code. Thanks for any info. _________________________________________________________________ Internet Explorer 8 – Now Available. Faster, safer, easier. http://clk.atdmt.com/MRT/go/141323790/direct/01/

2 1

Backporting and Apache 2.0.52 is 4 1/2 years old
by Rob Townley 23 Mar '09

23 Mar '09

http://httpd.apache.org/security/vulnerabilities_20.html states that Apache 2.0.52 is 4 years old and the latest version is 2.0.68. i am no longer a httpd expert, but at least one of the security fixes involves XSS attacks via malformed ftp commands. I also realize that redhat / centos may patch things separately from Apache and that the sysadmin has a great deal to do with how secure things are, but almost 5 years? Does the sysadmin for www.centos.org get paid?

4 4

OT: centos.org web site not responding
by Lanny Marcus 22 Mar '09

22 Mar '09

The web site for CentOS is not responding. I can ping it OK, but the web site is not responding to http requests from my browser. If the webmaster should happen to read this...

16 73

(no subject)
by Daniel Hays 22 Mar '09

22 Mar '09

Hi there, Could you please remove me from your mailing list? Thank you Daniel _________________________________________________________________ Need a new place to rent, share or buy? Let ninemsn property help. http://a.ninemsn.com.au/b.aspx?URL=http%3A%2F%2Fninemsn%2Edomain%2Ecom%2Eau…

2 1

Being Green, Time to make the servers sleep!
by James Bensley 21 Mar '09

21 Mar '09

Shadies and Mentlemen; I am trying to be green and put our backup servers to sleep during the day and have them wake on LAN and fire back up at night for our nightly backups as "sleep" is a sort of low power usage mode. (At this point I would be curious to know the different levels of sleep, what can I achieve? Does my server just drop into a low power state, or can I stop the hard drives as well?) I am wondering if it is achievable to script the process of putting a server to sleep so I can cron tab its behind! I would assume it would be possible but I don't know how, does anyone have any idea? -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GIT/MU/U dpu s: a--> C++>$ U+> L++> B-> P+> E?> W+++>$ N K W++ O M++>$ V- PS+++ PE++ Y+ PGP t 5 X+ R- tv+ b+> DI D+++ G+ e(+++++) h--(++) r++ z++ ------END GEEK CODE BLOCK------

7 10

fetchmail SSL protoco; issue
by Louis Lagendijk 21 Mar '09

21 Mar '09

I am using fetchmail to collect mail from some secondary mail accounts, among which is hotmail. So far I have used hotwayd to fetch the mail from hotmail using httpmail. Hotmail now supports pop3 access, so I decided to change fetchnail to fetch the mail directly over pop3. This works, but whatever I try, I get an error message when I run fetchmail: Invalid SSL protocol 'SSLv23' specified, using default (SSLv23). Invalid SSL protocol '' specified, using default (SSLv23). The relevant part of my .fetchmailrc is included below (userids and password changed for privacy reasons :-) poll pop3.live.com port 995 proto pop3 user xxxxx(a)hotmail.com password yyyyyy no keep ssl sslproto ssl23 fetchall to myuserid The error message remains almost the same when I remove the sslproto option, only the second line is printed My mail is correctly fetched however. For gmail I use the same setup, but do not get any errors there. Anybody got this working WITHOUT error messages? What am I doing wrong? Louis

2 1

Centos 5.2 ,5.3 and GFS2
by FM 21 Mar '09

21 Mar '09

Hello, I will create a Xen cluster and using GFS2 (with conga, ...) to create a new Xen cluster. I know that GFS2 is prod ready since RHEL 5.3. Do you know whent Centos 5.3 will be ready ? Can I install my GFS2 FS with centos 5.2 and then "simply" upgrade to 5.3 without reinstallation ? Tx

3 2

How to configure Xmanager to CentOS?
by madunix 21 Mar '09

21 Mar '09

Can any help in this issue, it would be really appreciated. I did the following, but it didnt help.... For XDMCP connection to Red Hat 5 EL 1. XDM Configuration 1. Change runlevel to 5 Open/etc/inittab and set the initial runlevel to 5 as following: id:5:initdefault: 2. Enable XDMCP For GDM: Open /etc/gdm/custom.conf and set the Enable entry to 1 in the [xdmcp] section as following. [xdmcp] Enable=1 For KDM: Open /usr/share/config/kdm/Xaccess and remove the initial "#" character for the following line: #* #any host can get a login window ==> * #any host can get a login window Open /usr/share/config/kdm/kdmrc and set the Enable entry to true in the [xdmcp] section as following. [xdmcp] Enable=true 2. Firewall (TCP/UDP Ports) Configuration Open UDP port 177 from the PC to the remote host direction. Open incoming TCP ports 6000~6010 from the remote host to your PC. 3. Reboot the remote host and start Xmanager # init 3; init 5

1 0

pam_access.so restrictions not working - syntax errors?
by Dirk H. Schulz 20 Mar '09

20 Mar '09

Hi folks, I want to restrict root access via ssh to certain (internal) hosts. That is what pam_access.so is for, I thought, so I configured: in /etc/security/access.conf I added (nothing in there before): + : root : 192.168.123.0/24 10.72.0.0/16 - : root : ALL in /etc/pam.d/ssh I added at the end: account required pam_access.so Then I restarted the ssh server. Basically, this kinda works. Cron suddenly had no right to do it's job, so I had to add + : root : LOCAL to /etc/security/access.conf But there still is no restriction on ssh logins by root - I can still login from anywhere. Next I tried putting it in one line in /etc/security/access.conf: - : root : ALL EXCEPT LOCAL 192.168.123.0/24 10.72.0.0/16 That did not change anything, still I can log in via ssh. I am stuck. According to documentation and the examples on the net this should be the right syntax. And, by the way, in my /etc/ssh/ sshd_config I have "UsePAM yes". Any help or hint is appreciated. Dirk

2 1

pam_ldap and nss_ldap failover
by Paul Heinlein 20 Mar '09

20 Mar '09

I'm (finally) getting around to putting a backup LDAP authentication server on my network. The backup uses syncrepl to grab the database, and to my eyes both LDAP servers answer read queries identically. I'm testing the client side of this configuration on virtual CentOS 5 i386 machine. /etc/ldap.conf reads ----- %< ----- base dc=DOMAIN,dc=com timelimit 30 bind_timelimit 30 idle_timelimit 300 nss_initgroups_ignoreusers root,ldap,named,[... trimmed ...] uri ldap://ldap1.DOMAIN.com ldap://ldap2.DOMAIN.com ssl start_tls tls_cacertdir /etc/openldap/cacerts pam_password md5 ----- %< ----- The client will bind to whichever server is listed first after the 'uri' directive. In the config snippet, it's 'ldap1' -- but it works the other way too. If the first-listed server goes away, the client never seems to try to find or bind to the second-listed server (where "never" == my patience limit of about an hour). Once the first-listed server goes away, all password authentication fails, though getent passwd and getent group still work (presumably because of nscd). Has anyone else experienced this or, more importantly, figured out a way to get failover to work in a reasonable timeframe? -- Paul Heinlein <> heinlein(a)madboa.com <> http://www.madboa.com/

2 2

stty and sockets
by Jerry Geis 20 Mar '09

20 Mar '09

With local com ports I can use stty to inspect the port settings. Is there a similiar method with a socket connection? I have an odd situation happening where my data collection program that is working on 3 machines is not working on the 4th. The program opens a socket to remote RS232 device no data is recieved. strangely though if I "telnet IP port" to the device it will send the data on this 4th unit. (odd that it works on 3 units but not the 1). I was thinking there must be something different with the way telnet is setting up the socket than I am setting up the socket. Is there a command or method that can inspect socket options like I can with stty for RS232 lines? If so how? Thanks, Jerry

2 2

wireshark
by Jerry Geis 20 Mar '09

20 Mar '09

I did a "yum -y install wireshark" and it was successful. After the is type "wireshark" and nothing. Is there a problem with this package or am I missing something. Jerry

4 4

CentOS-announce Digest, Vol 49, Issue 9
by centos-announce-request＠centos.org 20 Mar '09

20 Mar '09

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2009:0341 Moderate CentOS 3 ia64 curl - security update (Pasi Pirhonen) 2. CESA-2009:0341 Moderate CentOS 4 ia64 curl - security update (Pasi Pirhonen) 3. CESA-2009:0345 Moderate CentOS 3 ia64 ghostscript - security update (Pasi Pirhonen) 4. CESA-2009:0345 Moderate CentOS 4 ia64 ghostscript - security update (Pasi Pirhonen) 5. CESA-2009:0341 Moderate CentOS 3 s390(x) curl - security update (Pasi Pirhonen) 6. CESA-2009:0341 Moderate CentOS 4 s390(x) curl - security update (Pasi Pirhonen) 7. CESA-2009:0345 Moderate CentOS 3 s390(x) ghostscript - security update (Pasi Pirhonen) 8. CESA-2009:0345 Moderate CentOS 4 s390(x) ghostscript - security update (Pasi Pirhonen) 9. CESA-2009:0341 Moderate CentOS 3 i386 curl - security update (Tru Huynh) 10. CESA-2009:0341 Moderate CentOS 3 x86_64 curl - security update (Tru Huynh) 11. CESA-2009:0345 Moderate CentOS 3 i386 ghostscript - security update (Tru Huynh) 12. CESA-2009:0345 Moderate CentOS 3 x86_64 ghostscript - security update (Tru Huynh) ---------------------------------------------------------------------- Message: 1 Date: Thu, 19 Mar 2009 18:55:16 +0200 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2009:0341 Moderate CentOS 3 ia64 curl - security update To: centos-announce(a)centos.org Message-ID: <20090319165516.GV23300(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2009:0341 https://rhn.redhat.com/errata/RHSA-2009-0341.html The following updated files have been uploaded and are currently syncing to the mirrors: ia64: updates/ia64/RPMS/curl-7.10.6-9.rhel3.ia64.rpm updates/ia64/RPMS/curl-devel-7.10.6-9.rhel3.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

minimal installation - kickstart error
by Tom Brown 20 Mar '09

20 Mar '09

Hi I have inherited some kickstarts that attempt to remove some packages that at some point its been deemed they are not required. I am migrating all this over to cobbler but trying to get to the bottom of this error that although the kickstart completes sshd cant start as the package nss is not installed. It fails with this Installing nss - 3.11.99.5-2.el5.centos.x86_64 error: %pre(nss-3.11.99.5-2.el5.centos.x86_64) scriptlet failed, exit status 255 error: install: %pre scriptlet failed (2), skipping nss-3.11.99.5-2.el5.centos Which seems to happen due to this error while loading shared libraries: libssl3.so yum tells me # yum provides libssl3.so nss.i386 : Network Security Services nss.i386 : Network Security Services so # yum search "Network Security Services" nss.i386 : Network Security Services nss-tools.x86_64 : Tools for the Network Security Services nss-devel.x86_64 : Development libraries for Network Security Services nss.x86_64 : Network Security Services nss-devel.i386 : Development libraries for Network Security Services nss-tools.x86_64 : Tools for the Network Security Services mod_nss.x86_64 : SSL/TLS module for the Apache HTTP server nss.i386 : Network Security Services But anyone know what package messing this up as from what i can see nothing there is being 'removed' in the kickstart - below is a full list of packages removed in the kickstart thanks for any tips tom # individual packages to remove -acpid -apmd -aspell -aspell-en -at -autofs -bc -beecrypt -binutils -bluez-bluefw -bluez-hcidump -bluez-libs -bluez-utils -cpio -crash -cryptsetup -cups -cups-libs -cyrus-sasl -cyrus-sasl-md5 -cyrus-sasl-plain -dhclient -dhcpv6_client -dmraid -dosfstools -dump -ed -eject -fbset -finger -ftp -gpm -hesiod -irda-utils -isdn4k-utils -lftp -lha -logwatch -lrzsz -mailcap -minicom -mtools -mtr -mt-st -nano -nc -netconfig -NetworkManager -ntsysv -pam_smb -parted -pax -pcmcia-cs -pinfo -quota -rdate -rdist -redhat-logos -rmt -rp-pppoe -rsh -sendmail -slang -stunnel -system-config-mouse -system-config-network-tui -system-config-securitylevel-tui -talk -tcsh -up2date -vconfig -wireless-tools -wvdial -xinetd -ypbind -yp-tools

1 1

Wine
by madunix 20 Mar '09

20 Mar '09

Am running Centos5.2 64Bit, want to run windows application on it [x@linux10 ~]$ uname -a Linux 2.6.18-92.1.13.el5 #1 SMP Wed Sep 24 19:32:05 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux [x@linux10 ~]$ cat /etc/redhat-release CentOS release 5.2 (Final) Which Wine version should i install? Should i go for rpm or tarball package? Which packages should be installed beside Wine? Thanks -- THE MASTER

6 10

Firefox, sound, flash under CentOS 4.7
by Stephen Harris 20 Mar '09

20 Mar '09

If I run firefox then everything is fine... until I hit a page with flash and sound on it (youtube, some other stuff). Then it sems to lock the sound device and no other programs (eg Pidgin) can make sounds. In previous versions of firefox (firefox 2? Can't remember) I could run it under esddsp and then firefox/Flash played nicely with others. However now firefox just doesn't start up. FWIW, I don't use Gnome or KDE as a window manager; that _shouldn't_ cause any impact. Any ideas? -- rgds Stephen

2 1

Firefox seg faults
by Rob Kampen 20 Mar '09

20 Mar '09

Hi, I have two very similar AMD based work stations running fully current CentOS x86_64. Both have 4Gb of RAM, both have [rkampen@media ~]$ sudo rpm -qa |grep flash flash-plugin-10.0.22.87-release.i386 [rkampen@media ~]$ sudo rpm -qa |grep fire firefox-3.0.6-1.el5.centos.i386 One machine (home) works fine on my web page www.ndgonline.net/ndg/ the other (work) seg faults - I guess it is due to the godaddy link on the bottom of the page, as plain old google loads fine. I started this debacle by removing firefox, flash and the plugin directories on my work machine under /usr/lib/mozilla and /usr/lib64/mozilla as my page loads were very slow (only the godaddy bit) and also any video content (flash based I think) failed to play, yet all this works fine on the home machine. I guess there is some common lib somewhere that is corrupt, any ideas of where to start looking? I did have nspluginwrapper installed on the work machine, however this is no longer installed and is not installed on the home machine. Do not see what this provides, as I have more success playing multimedia content at home than at work...... Heading away from the work machine, thus ability to check if any changes work will be limited until I am in front of the screens tomorrow, however I can ssh and check packages etc. Thanks for your help. Rob

3 9

w command about user
by chloe K 20 Mar '09

20 Mar '09

Hi I use w command to get user is "2 users" but I only have connection one ls any process dead? But I check other centos machine is same How can I check it? Thank you [root@host ~]# w 7:22:26 up 20 days, 23:20, 2 users, load average: 0.00, 0.00, 0.00 USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT chloe pts/0 dsl-203-18-20-82. 7:22 0.00s 0.09s 0.09s sshd: chloe [priv] --------------------------------- Yahoo! Canada Toolbar : Search from anywhere on the web and bookmark your favourite sites. Download it now!

2 1

Bug with cron ?
by MOKRANI Rachid 20 Mar '09

20 Mar '09

Hi, Is there a bug under cron on CentOS 5.2 x86_64 ? kernel 2.6.18-92 Something is strange on my system. I have a simple shell script to run on many computers . When I run this script by hand, everything works fine on all workstations. But if I start this script via crontab vmplayer is never install with no errors. Any ideas ? Best regards. #/usr/bin/yum -e 0 -d 0 -y remove VMware-Player.x86_64 #/usr/bin/yum -e 0 -d 0 -y install VMware-Player-2.5.1-126130.x86_64 #/usr/bin/vmware-networks --stop #/usr/bin/vmware-networks --migrate-network-settings /vmware/virtualmachine #/usr/bin/vmware-networks --start #/sbin/chkconfig --level 345 vmware on __________________________ Ce message (et toutes ses pièces jointes éventuelles) est confidentiel et établi à l'intention exclusive de ses destinataires. Toute utilisation de ce message non conforme à sa destination, toute diffusion ou toute publication, totale ou partielle, est interdite, sauf autorisation expresse. L'IFP décline toute responsabilité au titre de ce message. This message and any attachments (the message) are confidential and intended solely for the addressees. Any unauthorised use or dissemination is prohibited. IFP should not be liable for this message. Visitez notre site Web / Visit our web site : http://www.ifp.fr __________________________

4 8

Re: [CentOS] ssh - alternate ports, and host verification
by russ＠vshift.com 19 Mar '09

19 Mar '09

Are these on the same ip, but different ports? I suggest setting up two different hostnames. Russ ------Original Message------ From: dnk Sender: centos-bounces(a)centos.org To: CentOS Mailing list ReplyTo: CentOS Mailing list Sent: Mar 19, 2009 6:53 PM Subject: [CentOS] ssh - alternate ports, and host verification I have a centos box that will need to ssh into 2 other centos boxes (with keys). Now one of these boxes is a firewall, and another is a system behind the firewall. I have rules in my firewall to punch into the system behind the FW. Now if i connect to the IP (sine the public one is shared), anytime i connect to the other system, I get the host verification failed error and have to remove the IP from the known_hosts file. What is the best (secure) way to get around this? I know i can disable the check, but that is not my preferred way. Thanks. d _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos Sent from my Verizon Wireless BlackBerry

2 1

ssh - alternate ports, and host verification
by dnk 19 Mar '09

19 Mar '09

I have a centos box that will need to ssh into 2 other centos boxes (with keys). Now one of these boxes is a firewall, and another is a system behind the firewall. I have rules in my firewall to punch into the system behind the FW. Now if i connect to the IP (sine the public one is shared), anytime i connect to the other system, I get the host verification failed error and have to remove the IP from the known_hosts file. What is the best (secure) way to get around this? I know i can disable the check, but that is not my preferred way. Thanks. d

2 2

Fwd: broken lame/mp3 output (was: Re: Problem with ecasound on CentOS 5.2, x86_64)
by MHR 19 Mar '09

19 Mar '09

I posed a question about this a while back, and Kai found the problem and sent this workaround: > ---------- Forwarded message ---------- > From: Kai Vehmanen <kvehmanen(a)eca.cx> > Date: Thu, Mar 19, 2009 at 3:03 PM > Subject: broken lame/mp3 output (was: Re: Problem with ecasound on CentOS 5.2, x86_64) > To: MHR <mhullrich(a)gmail.com> > Cc: ecasound-list(a)lists.sourceforge.net > > Hi, > > : > > Fortunately, a workaround is easy, just add: > > --cut-- > ext-cmd-mp3-output = lame -b %B -s %S -r --little-endian -S - %f > --cut-- > > ... to your ~/.ecasound/ecasoundrc and ta-daa it works. > This works nicely, so if anyone else was having this problem, here's the fix. mhr

1 0

Cent OS 4.4 x64 slow
by sumit agarwal 19 Mar '09

19 Mar '09

Hi, i installed Cent Os 4.4 x64 (all packages )on my thinkpad . i have enough ram ie 2 gb and good processor Core 2 duo.2.5 ghz T9300 evrey thing seems to be running very slow. any help would be welcome thanx Sumit

4 8

CentOS-announce Digest, Vol 49, Issue 8
by centos-announce-request＠centos.org 19 Mar '09

19 Mar '09

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2009:0358 Moderate CentOS 3 s390(x) evolution - security update (Pasi Pirhonen) 2. CESA-2009:0355 Moderate CentOS 4 s390(x) evolution and evolution-data-server - security update (Pasi Pirhonen) 3. CESA-2009:0354 Moderate CentOS 4 s390(x) evolution-data-server - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Wed, 18 Mar 2009 22:47:31 +0200 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2009:0358 Moderate CentOS 3 s390(x) evolution - security update To: centos-announce(a)centos.org Message-ID: <20090318204730.GS23300(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2009:0358 https://rhn.redhat.com/errata/RHSA-2009-0358.html The following updated files have been uploaded and are currently syncing to the mirrors: s390: updates/s390/RPMS/evolution-1.4.5-25.el3.s390.rpm updates/s390/RPMS/evolution-devel-1.4.5-25.el3.s390.rpm s390x: updates/s390x/RPMS/evolution-1.4.5-25.el3.s390x.rpm updates/s390x/RPMS/evolution-devel-1.4.5-25.el3.s390x.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

SELinux - different context on subdirectories
by Marcus Moeller 19 Mar '09

19 Mar '09

Hi all, I have created a directory /srv with the following SELinux context: system_u:object_r:var_t Now I want to create a subdirectory within /srv which should get a different context. So I tried to set e.g.: semanage fcontext -a -t samba_share_t /srv/samba /sbin/restorecon -v /srv/samba but the context is always reset to: system_u:object_r:var_t What am I missing? Best Regards Marcus

2 4

5.3 and ext4
by Jerry Geis 19 Mar '09

19 Mar '09

Is 5.3 and ext4 going to be safe? I have seen a couple reports of data loss using ext4? Has this already been fixed? What does the list recommend? ext3/ ext4? Thought maybe today we would start seeing 5.3 showing up... Looking forward to it. Jerry

3 2

Directory server import
by Per Qvindesland 19 Mar '09

19 Mar '09

Hi list Does anyone know if there is a simple way to import standard linux users into the directory server? I have found some but they don't seem to be so flexible since I have to import from several servers into different ou's Regards Per Qvindesland

2 2

connecting 2 servers using an FC card via iSCSI
by Erick Perez 19 Mar '09

19 Mar '09

Hi there, I have one server acting as a iscsi target running windows storage server r2 sp2 and the other server is running centos as an initiator. They are connected to a switch over a 1Gbit ethernet connection. the target is a Dell NF600 and the server running centos is a Poweredge R900. We want to move this configuration to a FC based installation using a Dell QLE2462 HBA (this is the hba we can get here). So, i would like to ask before i make a mistake..... :) If I purchase an ethernet fiber switch and add a Dell QLE2462 HBA to both servers and connect the servers to this ethernet switch, will I be able to use this configuration as iscsi target/initiator? will i be able to add a new server (initiator) to this configuration? or the whole thing is totally impossible? -- ------------------------------------------------------------ Erick Perez Cel +(507) 6675-5083 ------------------------------------------------------------

3 5

Re: [CentOS] [CentOS-announce] CESA-2009:0358 Moderate CentOS 3 ia64 evolution - security update
by Spiro Harvey 18 Mar '09

18 Mar '09

$ gpg --list-key 7049E44D025E513B pub 1024D/025E513B 2004-03-15 [expired: 2009-03-14] uid CentOS-3 Key <centos-3key(a)caosity.org> The key you signed with has expired. I tried refreshing it, but it had not changed. Is there any particular keyserver I should update it from? cheers -- Spiro Harvey Knossos Networks Ltd 021-295-1923 www.knossos.net.nz

1 0

wifi and the default keyring
by Michael Klinosky 18 Mar '09

18 Mar '09

Hello. I'm using my laptop (an Acer Aspire 3680, with built-in Atheros wifi). I installed 5.2 on it, and it's working nicely. But, I have an issue with the keyring. I should mention that this is my *first* experience with keyrings. When I set up the wifi, it stated basically that "nm-applet wants to access the default keyring, but it's locked. Enter password." So I did. (I made one up.) So, every time I boot, it asks for the password. Then, I found out about the trick of making it the same as the user's login password. Yes, that works, _but only if 'auto-login' is disabled_. It amounts to having to enter the login pw on every boot, or the default keyring pw. So, my question: * Can I totally disable (remove?) the keyring stuff, and set up nm-applet another way to get the wifi passphrase? - or - * Can I _permanently_ unlock the default keyring? - or - * Another trick? Whatever circumvents having to enter the keyring password with 'auto-login' enabled.

1 0

syslog: CPU stuck for 10s!
by tblader 18 Mar '09

18 Mar '09

Hi All, I have a Centos 5 box serving NFS3 shares from an LSI megaraid card. The box has been up and down for about a week and trying to figure out what's up. Found a syslog message today about "APIC error on CPU" and after rebooting with NOAPIC, I now get this: # cat /var/log/kernel | grep BUG Mar 17 09:51:05 ofdmz kernel: BUG: soft lockup - CPU#0 stuck for 10s! [migration/0:2] Mar 17 09:52:21 ofdmz kernel: BUG: soft lockup - CPU#0 stuck for 10s! [ssh:3491] Anyone know what this means? I found a thread* from 2006 on this list that mentions updating the bios, but thought I would get a message out early in case this doesn't fix it. Thanks [*] - http://lists.centos.org/pipermail/centos/2006-June/023933.html

3 4

Changing Color Mappings
by Brian Becker 18 Mar '09

18 Mar '09

I have been tasked with finding a way to change the color mappings on a CentOS 5.2 system. Basically I want to make an image that is black and white appear in different shades of gray by adjusting the color mappings. I need to know the starting point for the color maps however so I can make the appropriate adjustments. I have been told this should be some kind of look up table array of 256x3 elements. I have searched through the frame buffer in the kernel and the driver area for the intel frame buffer but haven't found anything that looks appropriate. Does this table exist or is the problem being tackled completely wrong. Any help, ideas, or pointers would be greatly appreciated. Thanks in advance. Brian

3 2

How to get usb storage under /media in runlevel 3?
by Kimmo Koivisto 18 Mar '09

18 Mar '09

Hello I have previously used Centos 4.x in runlevel 3, when I plug in my usb storage device/cd in cd-rom, it is shown under /media, for example /media/MyUsbStick. Now in Centos 5.2, when I insert usb storage device, nothing is shown under /media (runlevel 3). When I have runlevel 5 and X running, usb stick / cdrom is automounted fine. I can mount the stick using /dev/xxx device, but would prefer if: a) cdrom and usb-stick would appear under /media automatically and I could manually mount it b) cdrom and usb-stick would be automounted when inserted (like in runlevel 5). Any ideas, how to accomplish (a) or (b)? Regards, Kimmo Koivisto

2 3

CentOS-announce Digest, Vol 49, Issue 7
by centos-announce-request＠centos.org 18 Mar '09

18 Mar '09

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2009:0355 Moderate CentOS 4 ia64 evolution and evolution-data-server - security update (Pasi Pirhonen) 2. CESA-2009:0354 Moderate CentOS 4 ia64 evolution-data-server - security update (Pasi Pirhonen) 3. CESA-2009:0358 Moderate CentOS 3 ia64 evolution - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Tue, 17 Mar 2009 19:18:35 +0200 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2009:0355 Moderate CentOS 4 ia64 evolution and evolution-data-server - security update To: centos-announce(a)centos.org Message-ID: <20090317171835.GP23300(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2009:0355 https://rhn.redhat.com/errata/RHSA-2009-0355.html The following updated files have been uploaded and are currently syncing to the mirrors: ia64: updates/ia64/RPMS/evolution-2.0.2-41.el4_7.2.ia64.rpm updates/ia64/RPMS/evolution-data-server-1.0.2-14.el4_7.1.ia64.rpm updates/ia64/RPMS/evolution-data-server-devel-1.0.2-14.el4_7.1.ia64.rpm updates/ia64/RPMS/evolution-devel-2.0.2-41.el4_7.2.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

Correct way to provide kernel patch
by Chris Miller 18 Mar '09

18 Mar '09

I work with a USB device that is intercepted by the USB HID driver. In order to stop this behavior, the device needs to be added to the HID blacklist (hid-core.c) and a custom kernel needs to be compiled. If I create a CentOS specific patch, it appears I need to create the patch against an already patched source tree (i.e. after running rpmbuild -bp) because other patches exist that add items to the blacklist that would break my diff patch. Seems like this would be a never ending battle as new patches get added to new kernels. What's the correct way to get this device added to the kernel? Do I submit my patch to the CentOS dev team, to the kernel.org folks, or both? What's the timeline (if accepted) to actually seeing this in a production kernel? On the CentOS kernel build how-to, the kABI fixes won't make it into CentOS until 5.4, and 5.3 hasn't been released yet. Thanks in advance... Regards, Chris

3 2

Streaming video with Centos 5.2...how to?
by Gilbert Sebenste 18 Mar '09

18 Mar '09

Hello all, I am a noob to streaming video, and I have a file I'd like to stream (a .wmv file...sorry. ;-) ). In any case, how can I do this on my website using Centos 5.2 and Apache 2.2.8, rather than making people download a 20 MB video? Can someone point me to some URL's and some software? Thanks for any help, I greatly appreciate it! Gilbert ******************************************************************************* Gilbert Sebenste ******** (My opinions only!) ****** *******************************************************************************

6 6

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss