- Discuss - lists.centos.org

Installing Parallel Zip 250 on 4.4
by Rob Lines 10 Mar '07

10 Mar '07

I am trying to install a Zip 250 drive on CentOS 4.4 but the detect hardware at boot up is not finding it. I am not sure where to start as normally hardware is installed at the initial install or it auto detects on boot. Any help would be appreciated.

2 1

Adduser help
by Robert Moskowitz 10 Mar '07

10 Mar '07

at http://wiki.openpbx.org/tiki-index.php?page=Easy+route+to+building+OpenPBX.… there is the following adduser command: adduser --no-create-home --ingroup openpbx --disabled-password --disabled-login openpbx This does NOT seem to be the right format for Centos. So far, using man, I have come up with; adduser -M -g openpbx What else do I need?

6 7

[CentOS] imap problems; error accessing inbox and some other folders
by Joe Klemmer 10 Mar '07

10 Mar '07

Hello all, First off, please let me apologize for cross posting this in both the fedora and centos lists. I have just run into a problem with imap that's becoming a real issue. About two or three days ago some of the mail folders became unusable/unreadable. For instance, my inbox shows 41 unread messages when I access it through pine on the server. But if I imap into it from evolution it shows only one unread message. I tried thunderbird and kmail as well as squirrelmail and these gave some variation of this kind of error message: ------------------------------------------------------------------------- The current command did not succeed. The mail server responded: Invalid messageset: -2147483648:*. --------------------------- OR ------------------------------------------ The server couldn't find the message you requested. Most probably your message list was out of date and the message has been moved away or deleted (perhaps by another program accessing the same mailbox). ------------------------------------------------------------------------- I tried rebuilding the imap directories under each app as well as moving/renaming the .imap dir under $HOME/mail but to no avail. The pertinent info is - Server ====== CentOS 4.4 dovecot-0.99.11-4.EL4 squirrelmail-1.4.8-4.el4.centos sendmail-8.13.1-3.RHEL4.5 pine-4.64-1.2.el4.rf Client ====== FC5 evolution-2.6.3-1.fc5.5.sam.1 thunderbird-1.5.0.10-1.fc5 kmail 1.9.5 (from KDE: 3.5.5-0.2.fc5 Fedora-Core) If there is any more info needed let me know and I'll post it. Please try and reply directly to me. I will post a summery of what was wrong and how it got fixed (if it does get fixed). Thank you for any and all help, Joe -- Boring Home Page - http://www.webtrek.com/joe See my blog, sumo game ranks and other interesting junk

2 1

Amd-v which processor for virtualization
by Jerry Geis 10 Mar '07

10 Mar '07

I am wanting to play with the amd-v virtualization processor and centos. I was just looking at an AMD6000+ CPU but did not find any mention of it have the AMD-V instructions. What AMD processors support AMD-V instructions? Jerry

2 1

Could anyone please to help me for ipsec-tools on DDNS+NAT environment?
by toomore 10 Mar '07

10 Mar '07

Hi, I've met trouble when I attempt to create a VPN between my PC and my lan in my home. The structure of my network structure is illustrated in the attachment. First, I have no idea about how to configure the /etc/setkey.conf file. Because the two port on the Internet are both with dynamic IP. How do I specify the "add" statements for sad and "spd" statements? I've try to add sad entry like this: add 192.168.0.250 anonymous ah 0x200 -A hmac-sha2-256 0x7d5555f0355edabbb2e6e9a9c2d0ece421adbfaf94e953fe807e34ab22501d7c; But I got "Name or service not known at [ah]" error message after I run the command "/sbin/setkey -f /etc/setkey.conf". I doubt if it is possible to create a VPN with such network structure. I've read many articles about ipsec-tools over NAT-T, but all these articles assume that the ip address of the NAT gateway is static. Thanks, Enliang.

1 0

using true UTC timezone everywhere
by Florin Andrei 10 Mar '07

10 Mar '07

One problem with the daylight savings is that they mess with reporting tools that use timestamps. I guess an application could be configured to log UTC instead of local time, but that's not always doable. Also, if you have servers in several different timezones, it's better if all systems follow the same clock. So, I'm thinking it's perhaps better if I just use ZONE="UTC" on all systems. These are the steps I can think of so far: - make sure the BIOS clock is set to UTC - run timeconfig and make sure "System Clock uses UTC" is checked - cp /usr/share/zoneinfo/UTC /etc/localtime - edit /etc/sysconfig/clock and set ZONE="UTC" - reboot Voila - instant UTC clock. Never need to worry about daylight savings again. Anybody can think of any problems with: - the procedure I described? - the simple fact of using the "true" UTC timezone? -- Florin Andrei http://florin.myip.org/

6 8

rsh with passwords
by Florin Andrei 10 Mar '07

10 Mar '07

I am doing rsync over a private network. Encryption is not required. Currently rsync over ssh works, but requires too many CPU cycles (especially when doing a lot of transfers) on a CPU-bound system. I need to use rsh instead. The problem is, I can either set rsh to allow transfers without a password, or it won't let me transfer files at all. I need rsh to ask for a password. The network may be private (I don't worry about sniffers) but still I'm not OK with giving the rsync client a blank check and allow it to connect without a password. I tried to make various modifications to /etc/pam.d/rsh but I can't convince rshd to require a password. I searched the Web for a solution, but everyone seems to be in the opposite situation (looking to allow rsh to connect without a password, which is trivial). Any suggestion? -- Florin Andrei http://florin.myip.org/

5 5

Re: [users] Mrepo (with Redhat) works on one but not the other?
by Camron W. Fox 10 Mar '07

10 Mar '07

Matt Hyclak wrote: > On Fri, Mar 09, 2007 at 01:59:08PM -1000, Camron W. Fox enlightened us: >> Jim Perrin wrote: >>> On 3/9/07, Camron W. Fox <cwfox(a)us.fujitsu.com> wrote: >>> >>> <snip> >>> >>>> rhnget: "Unknown error that needs more debugging occured with channel >>>> rhel-x86_64-es-4-extras. Skipping.\n'up2date'" >>>> mrepo: Mirroring failed for rhns:///rhel-x86_64-es-4-extras with message: >>>> >>> Look at url string, rhns:/// >>> >>> I don't think that looks right. You might wish to check the >>> corresponding versions of all software involved. I'm not 100% where >>> it's pulling that value, but it may give you a place to start looking. >>> >>> >> Jim, >> >> It's straight out of /etc/mrepo.conf.d/rhel4es.conf, which is the >> same on both boxes: >> > > What version of mrepo? There was a problem at one time where rhns:/// > evaluated to something that came from the up2date configuration, which on a > CentOS box was not a redhat rhn server (go figure...). > > You might check that, as well as making sure the the line > > up2date default > > is uncommented in /etc/sysconfig/rhn/sources > > It is commented by default on CentOS boxes and is required for mrepo to work. > > Matt > Matt, D'Oh!!! I forgot to uncomment the "up2date default" line in /etc/sysconfig/rhn/sources! Thanks for showing me the obvious. Best Regards, Camron Camron W. Fox Hilo Office High Performance Computing Group Fujitsu America, INC. E-mail: cwfox(a)us.fujitsu.com

1 0

Performance problem with CentOS and XFS on EMC
by Mark Hull-Richter 10 Mar '07

10 Mar '07

We have an appliance that uses the CentOS 4.4 Plus kernel with XFS on an EMC RAID array that performs about ¼ or less as well with cached i/o than with direct i/o. With direct i/o we get about 32Mb/s throughput or better, but if we enable the cache for the EMC RAID, we only get 8Mb/s or less. This doesn't happen if we use JFS, where we get a little less than 32Mb/s throughput with or without cache enabled, on the same hardware and CentOS, but there are some features in XFS that we use that are not available in JFS.. Any thoughts on this? Thanks.

3 6

Wireless fails with Netgear MA401 card.
by Camron W. Fox 09 Mar '07

09 Mar '07

Alle, I have recently installed CentOS4.4 on an old Fujitsu E7110 laptop. I'm trying to get a Netgear MA401 card installed for wireless access but when I configure the card and start the network I get: Mar 9 09:03:20 localhost network: Setting network parameters: succeeded Mar 9 09:03:20 localhost kernel: ip_tables: (C) 2000-2002 Netfilter core team Mar 9 09:03:20 localhost network: Bringing up loopback interface: succeeded Mar 9 09:03:20 localhost kernel: hermes @ IO 0x100: Error -16 issuing command. Mar 9 09:03:20 localhost last message repeated 7 times Mar 9 09:03:20 localhost ifup: Error for wireless request "Set Mode" (8B06) : Mar 9 09:03:20 localhost ifup: SET failed on device eth1 ; Invalid argument. Mar 9 09:03:20 localhost kernel: hermes @ IO 0x100: Error -16 issuing command. Mar 9 09:03:20 localhost kernel: hermes @ IO 0x100: Error -16 issuing command. Mar 9 09:03:20 localhost ifup: Error for wireless request "Set Frequency" (8B04) : Mar 9 09:03:20 localhost ifup: SET failed on device eth1 ; Operation not supported. Mar 9 09:03:20 localhost kernel: hermes @ IO 0x100: Error -16 issuing command. Mar 9 09:03:20 localhost kernel: hermes @ IO 0x100: Error -16 issuing command. Mar 9 09:03:20 localhost kernel: ip_tables: (C) 2000-2002 Netfilter core team Mar 9 09:03:21 localhost ifup: Mar 9 09:03:21 localhost ifup: Determining IP information for eth1... Mar 9 09:03:21 localhost kernel: eth1: Error -110 setting MAC address Mar 9 09:03:21 localhost kernel: eth1: Error -110 configuring card Mar 9 09:03:21 localhost kernel: eth1: Error -110 setting MAC address Mar 9 09:03:21 localhost kernel: eth1: Error -110 configuring card Mar 9 09:03:21 localhost ifup: SIOCSIFFLAGS: Connection timed out Mar 9 09:03:21 localhost kernel: eth1: Error -110 setting MAC address Mar 9 09:03:21 localhost kernel: eth1: Error -110 configuring card Mar 9 09:03:21 localhost ifup: SIOCSIFFLAGS: Connection timed out Mar 9 09:03:21 localhost dhclient: DHCPREQUEST on eth1 to 255.255.255.255 port 67 Mar 9 09:03:21 localhost dhclient: send_packet: Network is down Mar 9 09:03:21 localhost dhclient: receive_packet failed on eth1: Network is down Mar 9 09:03:25 localhost dhclient: DHCPREQUEST on eth1 to 255.255.255.255 port 67 Mar 9 09:03:25 localhost dhclient: send_packet: Network is down Mar 9 09:03:32 localhost dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 5 Mar 9 09:03:32 localhost dhclient: send_packet: Network is down Mar 9 09:03:37 localhost dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 10 Mar 9 09:03:37 localhost dhclient: send_packet: Network is down Mar 9 09:03:47 localhost dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 11 Mar 9 09:03:47 localhost dhclient: send_packet: Network is down Mar 9 09:03:58 localhost dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 17 Mar 9 09:03:58 localhost dhclient: send_packet: Network is down Mar 9 09:04:15 localhost dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 10 Mar 9 09:04:15 localhost dhclient: send_packet: Network is down Mar 9 09:04:25 localhost dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 8 Mar 9 09:04:25 localhost dhclient: send_packet: Network is down Mar 9 09:04:33 localhost dhclient: No DHCPOFFERS received. Mar 9 09:04:33 localhost dhclient: Trying recorded lease 10.157.249.4 Mar 9 09:04:33 localhost kernel: eth1: Error -110 setting MAC address Mar 9 09:04:33 localhost kernel: eth1: Error -110 configuring card Mar 9 09:04:33 localhost ifup: SIOCSIFFLAGS: Connection timed out Mar 9 09:04:36 localhost ifup: PING 10.157.249.254 (10.157.249.254) from 10.157.249.4 eth1: 56(84) bytes of data. Mar 9 09:04:36 localhost ifup: Mar 9 09:04:36 localhost ifup: --- 10.157.249.254 ping statistics --- Mar 9 09:04:36 localhost ifup: 4 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2999ms Mar 9 09:04:36 localhost ifup: , pipe 4 Mar 9 09:04:36 localhost ifup: SIOCSIFFLAGS: Connection timed out Mar 9 09:04:36 localhost kernel: eth1: Error -110 setting MAC address Mar 9 09:04:36 localhost kernel: eth1: Error -110 configuring card Mar 9 09:04:36 localhost ifup: failed. Mar 9 09:04:36 localhost network: Bringing up interface eth1: failed Anyone have any ideas? Best Regards, Camron -- Camron W. Fox Hilo Office High Performance Computing Group Fujitsu America, INC. E-mail: cwfox(a)us.fujitsu.com Phone: (808) 934-4102 Cell: (808) 937-5026

1 0

Centos blocked
by Dago Pacheco 09 Mar '07

09 Mar '07

Hi I use to leave my PC turned on for a long time, but ultimately I've found it blocked. The mouse just don't work and the keyboard leds are blinking and there is no HD activity. I'd like to know which log should I check, to find the problem or what should I do. I u need more details, please just make know how to give'em. -- ________________________ Dago Pacheco Encargado de Informática Maetranza Makimet Ltda.

7 8

Error on starting apache server
by Ern jura 09 Mar '07

09 Mar '07

I get the following error when starting the apache2 server, any ideas. ./httpd: error while loading shared libraries: libpq.so.4: cannot open shared object file: No such file or directory [root@localhost sbin]#

12 24

Change of server
by Juca Pablo 09 Mar '07

09 Mar '07

Hello friends, I have a question for you, my server is in 4.4 (centos) and it is a Pentium III of 500 MHZ, it's a compaq proliant, now I want to change the dark disc of it to other, which is HP Pentium IV, is it possible that the change of server can be recognized by the Linux or I would have problems at the moment of it is started in the new server? Thanks and regards,

4 4

Custom ananconda
by Tronn Wærdahl 09 Mar '07

09 Mar '07

Hello mail list Forgive me if i doble post, coz my first attetemt didnt go through Im trying to include a new selection in "Installation type" in the anaconda installer when installing Centos 4.3 I have successfull made a inclution of "my" rpms when installing the OS, by modifying the the base group in the file comps.xml But what im trying to do is make a new selection in the Installation window [where you choose Server, desktop, custom..] I need some guidance about this topic, any help would be appriciated Tronn

2 2

autoLogin
by Ted Gervais 09 Mar '07

09 Mar '07

I just installed Centos (version 4.4) and wondering how I can change things so I don't have to login. I am aware of the security implications for doing this but I would prefer this if I can do it. I believe it has something to do with autologin and if so how is this configured ?? --- Ted Gervais, Coldbrook, Nova Scotia, Canada

5 5

Re: [CentOS] using true UTC timezone everywhere
by Stephen Harris 09 Mar '07

09 Mar '07

Florin Andrei wrote: > layer to the PHP page that will display those logs and optionally > convert the timestamps to local time on-the-fly, if that's what the user > wants. But then you've just moved the DST issue into your application and not really solved much at all :-) -- rgds Stephen

3 4

PREROUTING - DNAT with iptables for an ASTERISK BOX
by Indunil Jayasooriya 09 Mar '07

09 Mar '07

Hi, I am running a ASTERISK BOX behind a firewall. It is at DMZ . Now I want to connect to my ASTERISK BOX from Internet. So I want to DNAT. How can I do it? Pls assume that ip address that connects to Internet on firewall is 1.2.3.4and is attached to eth0. And ASTERISK BOX is 192.168.101.23 Then, What is the rule (PREROUTING) for it? What is the port to DNAT? I think udp 5060. So I have added below 2 rules . But it does not work at all. iptables -t nat -A PREROUTING -p udp -i eth0 -d 1.2.3.4 --dport 5060 -j DNAT --to-destination 192.168.101.23:5060 iptables -A FORWARD -p udp -d 192.168.101.23 --dport 5060 -j ACCEPT Can you help me to solve this issue? -- Thank you Indunil Jayasooriya

4 5

Videos
by Ted Gervais 09 Mar '07

09 Mar '07

I am trying to get my latest installation of Centos (4.4) to see videos when I am in www.cnn.com. I installed mplayer using yum and that went well. But I still get the screen from microsoft saying I need to install their plugin.. What more can I do to get these videos to work when I use either mozilla or konqueror.. Thanks..

5 6

apt-get install kernel
by Mark Quitoriano 09 Mar '07

09 Mar '07

how can i tell apt to install the latest version of kernel?

3 2

Centos 4.4 and impromptu reboot
by Emmanuel Fournier 09 Mar '07

09 Mar '07

we've 5 srv pentium III - 512 Mo with centos 4.4, everything was ok with c4.3, but since 4.4, 2 of them reboot immediatly when we do a yum update or when backup occurs accross network with scp ? Strange behavior, no ?! ______________________________________________ Emmanuel Fournier - ICT mailto:fournier@ict-toulouse.asso.fr

1 0

[Q] how to copy printer definition to other server?
by mcclnx mcc 09 Mar '07

09 Mar '07

we have CentOS 3.7 on DELL server. I configured 10 network printers to it. Does there has way I can copy printer definition files to other server (same on 3.7 version)? Thanks. ___________________________________________________ 您的生活即時通－溝通、娛樂、生活、工作一次搞定！ http://messenger.yahoo.com.tw/

4 9

recovery from loss of libssl.so.4?
by Larry Vaden 09 Mar '07

09 Mar '07

libssl.so.4 was erased by accident and now, e.g., iinvoking wget results in: wget: error while loading shared libraries: libssl.so.4: cannot open shared object file: No such file or directory [root@mail src]# How does one go about restoring libssl.so.4? [I've tried Google, compiling current edition from source, yum install, but note 'yum remove openssl' would take out about 140 features.] TIA/ldv

5 5

Customize anaconda installer
by Tronn Wærdahl 08 Mar '07

08 Mar '07

Hello mail list Im trying to include a new selection in "Installation type" in the anaconda installer when installing Centos 4.3 I have successfull made a inclution of "my" rpms when installing the OS, by modifying the the base group in the file comps.xml But what im trying to do is make a new selection in the Installation window [where you choose Server, desktop, custom..] I need some guidance about this topic, any help would be appriciated Tronn

1 0

Version of kgdb for CentOS 4.4 Plus 2.6.9 kernel
by Mark Hull-Richter 08 Mar '07

08 Mar '07

Does anyone happen to know the correct version of kgdb to use for debugging the 2.6.9 kernel? Version 2.4 is apparently for the 2.6.15 kernel, and version 2.2 is for the 2.6.13 kernel, but I've read all the way through the documentation and nowhere does it say which kgdb goes with which kernel. Thanks.

2 1

RE: MySQL Install error on Centos 4.3
by Ern jura 08 Mar '07

08 Mar '07

I get the following error on trying to install mysql rpms please any idea what might be wrong and how to work around it? [root@localhost linux 23-02-2007]# rpm -i --nodeps mysql-5.0.27-1.el4.centos.i386.rpm warning: mysql-5.0.27-1.el4.centos.i386.rpm: V3 DSA signature: NOKEY, key ID 443e1821 file /etc/my.cnf from install of mysql-5.0.27-1.el4.centos conflicts with file from package MySQL-server-standard-5.0.27-0.rhel4 file /usr/bin/mysql from install of mysql-5.0.27-1.el4.centosconflicts with file from package MySQL-client-standard-5.0.27-0.rhel4 file /usr/bin/mysql_waitpid from install of mysql-5.0.27-1.el4.centos conflicts with file from package MySQL-client-standard-5.0.27-0.rhel4 file /usr/bin/mysqladmin from install of mysql-5.0.27-1.el4.centosconflicts with file from package MySQL-client-standard-5.0.27-0.rhel4 file /usr/bin/mysqlbinlog from install of mysql-5.0.27-1.el4.centosconflicts with file from package MySQL-client-standard-5.0.27-0.rhel4 file /usr/bin/mysqlcheck from install of mysql-5.0.27-1.el4.centosconflicts with file from package MySQL-client-standard-5.0.27-0.rhel4 file /usr/bin/mysqldump from install of mysql-5.0.27-1.el4.centosconflicts with file from package MySQL-client-standard-5.0.27-0.rhel4 file /usr/bin/mysqlimport from install of mysql-5.0.27-1.el4.centosconflicts with file from package MySQL-client-standard-5.0.27-0.rhel4 file /usr/bin/mysqlshow from install of mysql-5.0.27-1.el4.centosconflicts with file from package MySQL-client-standard-5.0.27-0.rhel4 [root@localhost linux 23-02-2007]# rpm -i mysqlclient10-3.23.58-9.2.c4.i386.rpm warning: mysqlclient10-3.23.58-9.2.c4.i386.rpm: V3 DSA signature: NOKEY, key ID 443e1821 file /usr/lib/mysql/libmysqlclient.so.10.0.0 from install of mysqlclient10-3.23.58-9.2.c4 conflicts with file from package mysqlclient10-3.23.58-4.RHEL4.1 file /usr/lib/mysql/libmysqlclient_r.so.10.0.0 from install of mysqlclient10-3.23.58-9.2.c4 conflicts with file from package mysqlclient10-3.23.58-4.RHEL4.1 [root@localhost linux 23-02-2007]#

5 7

Weird Secure log timestamp problem
by Mike 08 Mar '07

08 Mar '07

Greetings. I'm running CentOS on multiple machines and a few third-party VPS's and have some odd logging issues today. It all started when tcpwrappers couldn't seem to recognize my PC's hostname as being a valid hostname for access. Fortunately I was able to get in with a direct IP. When trying to discover what's going on, I found some very odd entries in the secure log... (IP's changed to protect the identity of my PC and the machines) Mar 8 17:55:53 server123 sshd[3053]: Failed publickey for root from ::ffff:192.168.87.119 port 45686 ssh2 Mar 8 17:55:55 server123 sshd[3053]: Accepted password for root from ::ffff:192.168.87.119 port 45686 ssh2 Mar 8 09:55:55 server123 sshd[3052]: Accepted password for root from ::ffff:192.168.87.119 port 45686 ssh2 Mar 8 18:01:18 server123 sshd[4743]: Failed publickey for root from ::ffff:192.168.87.119 port 45692 ssh2 Mar 8 18:01:20 server123 sshd[4743]: Accepted password for root from ::ffff:192.168.87.119 port 45692 ssh2 Mar 8 10:01:20 server123 sshd[4742]: Accepted password for root from ::ffff:192.168.87.119 port 45692 ssh2 Mar 8 10:01:38 server123 sshd[4792]: reverse mapping checking getaddrinfo for s0106001111e058c2.myispdomain.net failed - POSSIBLE BREAKIN ATTEMPT! Mar 8 10:01:38 server123 sshd[4792]: Accepted password for root from ::ffff:10.10..161.102 port 57689 ssh2 Mar 8 10:01:38 server123 sshd[4793]: Accepted password for root from ::ffff:10.10..161.102 port 57689 ssh2 Mar 8 18:07:19 server123 sshd[6411]: Connection closed by ::ffff:10.10..161.102 Mar 8 18:09:02 server123 sshd[6699]: Accepted password for root from ::ffff:10.10..161.102 port 58017 ssh2 Mar 8 10:09:02 server123 sshd[6698]: Accepted password for root from ::ffff:10.10..161.102 port 58017 ssh2 This snippet is in order that it appears in the database. Notice the timestamp. It starts off thinking it's almost 6pm then reverts th the correct time of almost 10am, then to 6pm, then back to 10am and so on and so forth. Upon looking back even further, I can see that this has been happening as far back as the secure logs go... Early February. Checking through other machines, most seem to have this behavior, but some do not. The machines I've updated using "yum update" recently seem to be the ones with this odd behavior. Machines that are less up-to-date don't seem to have any weird logging and accept my SSH as expected. I've been watching the server time using date and it seems to always report what it should... -- Mike

3 4

CentOS-announce Digest, Vol 25, Issue 5
by centos-announce-request＠centos.org 08 Mar '07

08 Mar '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0106 Important CentOS 4 x86_64 gnupg - security update (Johnny Hughes) 2. CESA-2007:0106 Important CentOS 4 i386 gnupg - security update (Johnny Hughes) 3. CEBA-2007:0080 CentOS 4 i386 gcc - bugfix update (Johnny Hughes) 4. CEBA-2007:0080 CentOS 4 x86_64 gcc - bugfix update (Johnny Hughes) 5. CEBA-2007:0101 CentOS 4 i386 gcc4 - bugfix update (Johnny Hughes) 6. CEBA-2007:0101 CentOS 4 x86_64 gcc4 - bugfix update (Johnny Hughes) 7. CEEA-2007:0104 CentOS 4 x86_64 tzdata - enhancement update (Johnny Hughes) 8. CEEA-2007:0104 CentOS 4 i386 tzdata - enhancement update (Johnny Hughes) 9. Re: CEBA-2007:0080 CentOS 4 i386 gcc - bugfix update (Johnny Hughes) 10. Re: CEBA-2007:0101 CentOS 4 i386 gcc4 - bugfix update (Johnny Hughes) 11. Re: CEBA-2007:0101 CentOS 4 x86_64 gcc4 - bugfix update (Johnny Hughes) 12. Re: CEEA-2007:0104 CentOS 4 x86_64 tzdata - enhancement update (Johnny Hughes) 13. Re: CEEA-2007:0104 CentOS 4 i386 tzdata - enhancement update (Johnny Hughes) 14. Re: CEBA-2007:0080 CentOS 4 x86_64 gcc - bugfix update] (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 08 Mar 2007 02:27:01 -0600 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2007:0106 Important CentOS 4 x86_64 gnupg - security update To: CentOS-Announce <centos-announce(a)centos.org> Message-ID: <1173342421.5147.191.camel(a)myth.home.local> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2007:0106 https://rhn.redhat.com/errata/RHSA-2007-0106.html The following updated files have been uploaded and are currently syncing to the mirrors: x86_64: gnupg-1.2.6-9.x86_64.rpm src: gnupg-1.2.6-9.src.rpm

1 0

RE: Apache Install error on Centos 4.3
by Ern jura 08 Mar '07

08 Mar '07

I get the following error on installing Apache 2.2.4 on, any ideas what might be wrong. make[1]: Entering directory `/home/odege/Desktop/httpd-2.2.4/support' make[2]: Entering directory `/home/odege/Desktop/httpd-2.2.4/support' /usr/lib/apr-1/build/libtool --silent --mode=link gcc -pthread -o htpasswd htpasswd.lo -lm /home/odege/Desktop/httpd-2.2.4/srclib/pcre/libpcre.la /usr/lib/libaprutil-1.la -lldap -llber -ldb-4.2 -lexpat /usr/lib/libapr-1.la-lpthread -ldl /usr/bin/ld: warning: libpq.so.4, needed by /usr/lib/libaprutil-1.so, not found (try using -rpath or -rpath-link) /usr/lib/libaprutil-1.so: undefined reference to `PQgetResult' /usr/lib/libaprutil-1.so: undefined reference to `PQconnectdb' /usr/lib/libaprutil-1.so: undefined reference to `PQexec' /usr/lib/libaprutil-1.so: undefined reference to `PQexecPrepared' /usr/lib/libaprutil-1.so: undefined reference to `PQntuples' /usr/lib/libaprutil-1.so: undefined reference to `PQreset' /usr/lib/libaprutil-1.so: undefined reference to `PQsendQueryParams' /usr/lib/libaprutil-1.so: undefined reference to `PQexecParams' /usr/lib/libaprutil-1.so: undefined reference to `PQclear' /usr/lib/libaprutil-1.so: undefined reference to `PQresultStatus' /usr/lib/libaprutil-1.so: undefined reference to `PQgetvalue' /usr/lib/libaprutil-1.so: undefined reference to `PQstatus' /usr/lib/libaprutil-1.so: undefined reference to `PQnfields' /usr/lib/libaprutil-1.so: undefined reference to `PQcmdTuples' /usr/lib/libaprutil-1.so: undefined reference to `PQescapeString' /usr/lib/libaprutil-1.so: undefined reference to `PQsendQueryPrepared' /usr/lib/libaprutil-1.so: undefined reference to `PQfinish' /usr/lib/libaprutil-1.so: undefined reference to `PQerrorMessage' /usr/lib/libaprutil-1.so: undefined reference to `PQsendQuery' collect2: ld returned 1 exit status make[2]: *** [htpasswd] Error 1 make[2]: Leaving directory `/home/odege/Desktop/httpd-2.2.4/support' make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory `/home/odege/Desktop/httpd-2.2.4/support' make: *** [install-recursive] Error 1 [odege@localhost httpd-2.2.4]$

4 3

kde and weather?
by Scott R Ehrlich 08 Mar '07

08 Mar '07

I just changed my window manager from the default to kde. I'd like to get the weather applet back. What is the name of it and how do I restore it under kde? Thanks. Scott

3 2

Re: [CentOS-announce] CEBA-2007:0080 CentOS 4 x86_64 gcc - bugfix update
by Johnny Hughes 08 Mar '07

08 Mar '07

On Thu, 2007-03-08 at 04:14 -0600, Johnny Hughes wrote: > CentOS Errata and Bugfix Advisory 2007:0080 > > https://rhn.redhat.com/errata/RHSA-2007-0080.html > The real link: https://rhn.redhat.com/errata/RHBA-2007-0080.html <snip>

1 0

Screen blacked out
by techlists＠comcast.net 08 Mar '07

08 Mar '07

I have a CentOS 4.3 workstation I use for experimentation on my desk at work. It was plugged into an old LG 14" monitor, and I switched the video cable to a Samsung 17" LCD without rebooting. The screen resolution was set to 800x600 on the 14" monitor, and the display worked fine at 800x600 after switching to the Samsung 17". When I changed the resolution to 1024x764, the screen went black and I haven't been able to get it back again. I hoped rebooting and having the system search for new hardware would adjust the display driver to the correct monitor but it didn't. I booted with CD1 in rescue mode and changed /etc/inittab to start in command line mode (3), but the screen still goes black after going through some initial boot processes. I suspect the issue is driver related, rather than screen resolution related. When I initially went to change the resolution, it recognized the monitor as a generic VGA, and I changed the monitor type to Samsung Syncmaster 711T at the same time as changing the resolution. How can I get the system to recognize the new monitor? Paul G.

3 2

FritzCard PCI will not work
by Frank Büttner 07 Mar '07

07 Mar '07

Hello, I will use CentOS 4.4 and Hylafax to build an fax server. But when call /sbin/capiinit I only get the error: ERROR: cannot load module kernelcapi I have build and install the kernel module for my friz card. What must I do to get this working? Frank

2 2

Time Change: Centos-immune?
by Karl R. Balsmeier 07 Mar '07

07 Mar '07

hey all, I perused my inbox looking for this subject, but not finding it, -anything I need to keep my server farm of 60 centos servers (that all run ntp) going smoothly during this next time change on March 11? I noticed on the w2k side my IT staff have to do some scrambling, heh, but that's expected. Any action required? -karlski

9 18

Help with Dell PE2950 and RAID5 setup
by Scott Ehrlich 07 Mar '07

07 Mar '07

I've got a new PE2950 rack system with PERC controller and 6 drives set up contiguously as one RAID5 volume on the PERC controller. Using 64-bit CentOS 4.4, I partitioned for /boot having 100 Meg, swap having 2 gig, and / with the rest (removed LVM). After the install was complete, the system rebooted and just gave me a broken grub prompt (not the graphical Grub boot selector, but grub>). I fed it root (hd0,0) and setup (hd0) and rebooted. I then got the grub gui, but also got the following after the attempted kernel boot: Decompressing Linux...done. Booting the kernel. Red Hat nash version 4.2.1.8 starting sda: asking for cache data failed sda: assuming drive cache: write through sda: asking for cache data failed sda: assumint drive cache: write through EXT3-fs error (device sda3): ext3_get_inode_loc: unable to read inode block - inode=2132343, block=1231234 mount: error 5 mounting none EXT3-fs error (device sda3): ext3_get_inode_loc: unable to read inode block - inode=123123, block=124324123 EXT3-fs error (device sda3): ext3_get_inode_loc: unable to read inode block - inode=6353565, block=34634635 WARNING: can't access (null) exec of init ((null)) failed!!!: 14 EXT3-fs error (device sda3): ext3_get_inode_loc: unable to read inode block - inode=1245546546, block=645243235 umount /initrd/dev failed: 5 Kernel panic - not syncing: Attempted to kill init! What might be wrong? Bad hard drive? This, again, is a fresh install, straight off the 64-bit CentOS 4.4 4 CD set. Thanks. Scott

1 0

CentOS-announce Digest, Vol 25, Issue 4
by centos-announce-request＠centos.org 07 Mar '07

07 Mar '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0106-01: Important CentOS 2 i386 gnupg security update (John Newbigin) 2. CESA-2007:0104-2: Low CentOS 2 i386 tzdata enhancement update (John Newbigin) ---------------------------------------------------------------------- Message: 1 Date: Wed, 07 Mar 2007 12:28:25 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2007:0106-01: Important CentOS 2 i386 gnupg security update To: centos-announce(a)centos.org Message-ID: <45EE1539.9070600(a)ict.swin.edu.au> Content-Type: text/plain; charset=us-ascii; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2007:0106-01 Important: gnupg security update Files available: gnupg-1.0.7-21.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin Computer Systems Officer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ Message: 2 Date: Wed, 07 Mar 2007 12:38:07 +1100 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2007:0104-2: Low CentOS 2 i386 tzdata enhancement update To: centos-announce(a)centos.org Message-ID: <45EE177F.10405(a)ict.swin.edu.au> Content-Type: text/plain; charset=us-ascii; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHEA-2007:0104-2 tzdata enhancement update Files available: tzdata-2007c-1.el2_1.noarch.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin Computer Systems Officer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 25, Issue 4 **********************************************

1 0

Re: [CentOS] Screen blacked out
by techlists＠comcast.net 07 Mar '07

07 Mar '07

Yes, as mentioned below, I edited /etc/inittab from rescue mode, and changed it to run level 3. And the screen still went black upon reboot. -------------- Original message ---------------------- From: "Eduardo Grosclaude" <eduardo.grosclaude(a)gmail.com> > On 3/6/07, techlists(a)comcast.net <techlists(a)comcast.net> wrote: > > I have a CentOS 4.3 workstation I use for experimentation on my desk at work. > It was plugged into an old LG 14" monitor, and I switched the video cable to a > Samsung 17" LCD without rebooting. > > > > The screen resolution was set to 800x600 on the 14" monitor, and the display > worked fine at 800x600 after switching to the Samsung 17". When I changed the > resolution to 1024x764, the screen went black and I haven't been able to get it > back again. > > > > I hoped rebooting and having the system search for new hardware would adjust > the display driver to the correct monitor but it didn't. I booted with CD1 in > rescue mode and changed /etc/inittab to start in command line mode (3), but the > screen still goes black after going through some initial boot processes. > > > > I suspect the issue is driver related, rather than screen resolution related. > When I initially went to change the resolution, it recognized the monitor as a > generic VGA, and I changed the monitor type to Samsung Syncmaster 711T at the > same time as changing the resolution. > > > > How can I get the system to recognize the new monitor? > Did you try booting in runlevel <= 3 and then system-config-display > --reconfig? If that works, you could set display as vanilla as you can > and then start your customisation over. > Also you can peek at several options with system-config-display --help > > > -- > Eduardo Grosclaude > Universidad Nacional del Comahue > Neuquen, Argentina > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos

3 2

Wireless PCI card for Dekstops
by Devraj Mukherjee 07 Mar '07

07 Mar '07

Hi Everyone, Any recommendations for a wireless card for my desktop running CentOS? I found various posts for choosing wireless cards for laptops not for dekstops. Thanks. -- "I never look back darling, it distracts from the now", Edna Mode (The Incredibles)

2 1

iptables logging - HELP
by Indunil Jayasooriya 07 Mar '07

07 Mar '07

I am having below 3 rules for Logging with iptables . They are INPUT,FORWARD and OUTPUT chains. #Log INPUT chain iptables -A INPUT -j LOG --log-level 7 --log-prefix "INPUT: " #Log FORWARD chain iptables -A FORWARD -j LOG --log-level 7 --log-prefix "FORWARD: " #Log OUTPUT chain iptables -A OUTPUT -j LOG --log-level 7 --log-prefix "OUTPUT: " In addition to that, I want to have logging for POSTROUTING,PREROUTING and mangle. What are the rules for logging POSTROUTING,PREROUTING and mangle. Help needed. -- Thank you Indunil Jayasooriya -- Thank you Indunil Jayasooriya

1 0

Re: [CentOS] Re: Screen blacked out
by techlists＠comcast.net 06 Mar '07

06 Mar '07

-------------- Original message ---------------------- From: Scott Silva <ssilva(a)sgvwater.com> > techlists(a)comcast.net spake the following on > 3/6/2007 10:38 AM: > > Yes, as mentioned below, I edited /etc/inittab from rescue mode, and changed > it to run level 3. And the screen still went black upon reboot. > > > Then it is not related to your x configs. Have you tried going back to the > other monitor to see if the newer monitor has some issue? I don't think it's the xconfigs, I think it's the driver for the monitor. There's nothing wrong with the monitor; the boot messages display on the screen until a certain point, and then the screen blacks out. How can I get the system to look at a different driver? Paul

3 2

ca.pl for openssl
by Dustin Krysak 06 Mar '07

06 Mar '07

This is probably going ot sound really dumb, but which packages need to be installed to have use of hte CA.pl script? I installed openssl, openssl-perl, etc, but can't seem to find it anywhere on my system.. Thanks!

3 2

RE: [CentOS] 4.4 on PE6400 - not rebooting ... FINALLY WORKS !
by Joe Kazura 06 Mar '07

06 Mar '07

Folks - FYI: I finally got it to work (at least once)! reboot=bios,smp,warm Since I didn't actually TRY 'reboot=triple', I, of course, am wondering if 'reboot=triple' is synonymous for 'reboot=bios,smp,warm' ... Mmmmm - masochism!!! A co-worker pointed me to this: /usr/share/doc/kernel-doc-2.6.9/Documentation/kernel-parameters.txt Specifically: reboot= [BUGS=IA-32,BUGS=ARM,BUGS=IA-64] Rebooting mode Format: <reboot_mode>[,<reboot_mode2>[,...]] See arch/*/kernel/reboot.c or arch/*/kernel/process.c BUT - I don't have either 'reboot.c' or 'process.c' (ARG!) So ... after a TON of googling I found references to various combinations of the three, but not all three together. It works!!! FINALLY!!! -- +----------------------------[ Joe.Kazura(a)UNH.EDU ]---+ | Joe Kazura | Mac OS X ... | CIS/TCS -- 1 Leavitt Lane PHONE: +1-603-862-2012 | Because UNIX | University of New Hampshire | should be user | Durham, NH 03824-3512 USA "docendo discimus" | friendly! | | +-----------------[ http://www.unh.edu/tcs/ ]---------+ On Mar 2, 2007, at 7:03 AM, Morten Torstensen wrote: > Joe Kazura wrote: >> Well - reboot=bios didn't work ... >> I'll try 'reboot=triple' when I get a chance. > > Speaking of the devil... I've had a mobo where I needed reboot=bios > on CentOS 4. Now with RHEL5, that parameter is no longer effective. > Seems like YMMV a lot. I will try to remember to keep you updated > if I find another solution :) > > -- > > //Morten Torstensen

2 1

CentOS-announce Digest, Vol 25, Issue 3
by centos-announce-request＠centos.org 06 Mar '07

06 Mar '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0106 Important CentOS 3 i386 gnupg - security update (Tru Huynh) 2. CESA-2007:0106 Important CentOS 3 x86_64 gnupg - security update (Tru Huynh) 3. CESA-2007:0106 Important CentOS 3 ia64 gnupg - security update (Pasi Pirhonen) 4. CESA-2007:0106 Important CentOS 3 s390(x) gnupg - security update (Pasi Pirhonen) 5. CESA-2007:0106 Important CentOS 3 s390(x) gnupg - security update (Pasi Pirhonen) 6. CESA-2007:0106 Important CentOS 4 ia64 gnupg - security update (Pasi Pirhonen) 7. CESA-2007:0106 Important CentOS 4 s390(x) gnupg - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Tue, 6 Mar 2007 12:23:21 +0100 From: Tru Huynh <tru(a)centos.org> Subject: [CentOS-announce] CESA-2007:0106 Important CentOS 3 i386 gnupg - security update To: centos-announce(a)centos.org Message-ID: <20070306112321.GA6265(a)sillage.bis.pasteur.fr> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory CESA-2007:0106 gnupg security update for CentOS 3 i386: https://rhn.redhat.com/errata/RHSA-2007-0106.html The following updated file has been uploaded and is currently syncing to the mirrors: i386: updates/i386/RPMS/gnupg-1.2.1-20.i386.rpm source: updates/SRPMS/gnupg-1.2.1-20.src.rpm You may update your CentOS-3 i386 installations by running the command: yum update gnupg Tru -- Tru Huynh (CentOS-3 i386/x86_64 Package Maintenance) http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xBEFA581B

1 0

PowerDNS binaries on centosplus?
by Devraj Mukherjee 06 Mar '07

06 Mar '07

Hi everyone, How does one go about putting a request for getting a package included in centosplus? We are heavy users the product PowerDNS and are keen to see that be included in the centosplus repository, so it can be compiled against other recent packages like MySQL5 etc. Any pointers will be helpful -- "I never look back darling, it distracts from the now", Edna Mode (The Incredibles)

2 1

VT-x or AMD-V capable machines
by Tom Diehl 06 Mar '07

06 Mar '07

Does anyone know how to tell if a machine is VT-x or AMD-V capable before I buy it? I have read some mailing list stuff that even if the processor is capable, sometimes it is disabled in the BIOS, with no way to enable it. I think HP was/is doing this. Can anyone shed some light on the current situation wrt this? Regards, -- Tom Diehl tdiehl(a)rogueind.com Spamtrap address mtd123(a)rogueind.com

1 0

blocks 256k chunks on RAID 1
by israel.garcia＠cimex.com.cu 06 Mar '07

06 Mar '07

Hi, I have a RAID 1 (using mdadm) on CentOS Linux and in /proc/mdstat I see this: md7 : active raid1 sda2[0] sdb2[1] 26627648 blocks [2/2] [UU] [-->> it's OK] md1 : active raid1 sdb3[1] sda3[0] 4192896 blocks [2/2] [UU] [-->> it's OK] md2 : active raid1 sda5[0] sdb5[1] 4192832 blocks [2/2] [UU] [-->> it's OK] md3 : active raid1 sdb6[1] sda6[0] 4192832 blocks [2/2] [UU] [-->> it's OK] md4 : active raid1 sdb7[1] sda7[0] 4192832 blocks [2/2] [UU] [-->> it's OK] md5 : active raid0 sdb8[1] sda8[0] 8385536 blocks 256k chunks [-->>>>>> What's the meaning of this? Is it an error on the hdds? What can I do to fix this?] Thanks in advance. regards, Israel

2 1

LDAP + SSL
by Alexander Lopez 06 Mar '07

06 Mar '07

Hi everybody I have setting my ldap server. But I created an certificate with the following command: cd /usr/share/ssl/certs; make ldap.pem Then edit slapd.conf file a insert the following lines: TLSCipherSuite HIGH:MEDIUM:+SSLv2 TLSCACertificateFile /usr/share/ssl/certs/ldap.pem TLSCertificateFile /usr/share/ssl/certs/ldap.pem TLSCertificateKeyFile /usr/share/ssl/certs/ldap.pem I restart the service. Then, I run the comando authconfig and I select ldap with tls. I review the logs ldap server a thrown the following: Mar 5 11:54:38 eucalipto slapd[711]: conn=13 fd=14 ACCEPT from IP= 172.16.12.160:33935 (IP=0.0.0.0:389) Mar 5 11:54:38 eucalipto slapd[711]: conn=13 op=0 STARTTLS Mar 5 11:54:38 eucalipto slapd[711]: conn=13 op=0 RESULT oid= err=0 text= Mar 5 11:54:39 eucalipto slapd[711]: conn=13 fd=14 closed (TLS negotiation failure) I need you help.

2 3

DHCP Messages
by Jean Figarella 06 Mar '07

06 Mar '07

Hi, Im getting this messages in the /var/log/messages about my dhcp server. I assume there is nothing to worry about, but just in case I have to ask. Are these messages fine? Do I need to specify the interface on which the dhcp server should listen to? ... dhcpd: Multiple interfaces match the same subnet: eth0 eth1 dhcpd: Multiple interfaces match the same shared network: eth0 eth1 LPF/eth1/00:a0:d1:e2:f5:1f/192.168.3/24 dhcpd: Multiple interfaces match the same subnet: eth0 eth1 dhcpd: Sending on LPF/eth1/00:a0:d1:e2:f5:1f/192.168.3/24 dhcpd: Multiple interfaces match the same shared network: eth0 eth1 dhcpd: Listening on LPF/eth0/00:a0:d1:e2:f5:1e/192.168.3/24 .... Thanks Jean

5 7

Kickstart Installation - Is it possible to set a fixed IP for installation?
by first last 06 Mar '07

06 Mar '07

Hi everyone, I am trying to set up an automated CentOS installation system. My idea is to use PXE to boot the kernel/initrd and pass the kickstart options to the kernel from there. This works correctly until it boots up Linux. As soon as it does that it makes a DHCP request and, unsurprisingly, it gets the same one (same MAC) but it also gets the filename and next-server details. Then Anaconda tries to use those details instead of the ones I specified on the command line. You can see on one of the other VTs that it is trying to load /pxelinux.0 instead of using http://server/1.ks. I can see three possible solutions for this: -Forcing (somehow) Anaconda to use a fixed IP address (possibly via a %pre script?), or, at least, making it use the kickstart file that gets passed from pxelinux. -Configuring the DHCP server so it knows how to differentiate between requests (not too sure on how to do it yet). -Doing a complete hack. When it gets the second request, it tries to access nfs:/server:/pxeboot.0. I could create the NFS share and add the file there, maybe symlinked to the right one, but it would stop me from being able to have different installations selectable from pxelinux. My ideal solution would be the first, as the other two seem to be workarounds, more than solutions. Any help will be greatly appreciated. Gabriel ___________________________________________________________ What kind of emailer are you? Find out today - get a free analysis of your email personality. Take the quiz at the Yahoo! Mail Championship. http://uk.rd.yahoo.com/evt=44106/*http://mail.yahoo.net/uk

2 2

iptables logging
by Indunil Jayasooriya 06 Mar '07

06 Mar '07

I am having below 3 rules for Logging with iptables . They are INPUT,FORWARD and OUTPUT chains. #Log INPUT chain iptables -A INPUT -j LOG --log-level 7 --log-prefix "INPUT: " #Log FORWARD chain iptables -A FORWARD -j LOG --log-level 7 --log-prefix "FORWARD: " #Log OUTPUT chain iptables -A OUTPUT -j LOG --log-level 7 --log-prefix "OUTPUT: " In addition to that, I want to have logging for POSTROUTING,PREROUTING and mangle. What are the rules for logging POSTROUTING,PREROUTING and mangle. Help needed. -- Thank you Indunil Jayasooriya

1 0

Anyone working on Openpbx?
by Robert Moskowitz 06 Mar '07

06 Mar '07

I am interested in getting Openpbx up on Centos. The install information is at http://wiki.openpbx.org/tiki-index.php?page=Getting+Started And it is quite a bit beyond my current skills, so I am looking for some one that has done it and can help step me through it. I want Openpbx over AsteriskNow or Trixbox to get T.38 support.

1 0

Kickstart with all the latest updates?
by Alfred von Campe 05 Mar '07

05 Mar '07

Currently, I kickstart my machines over http to install CentOS 4.4 and then in a script called from %post do a "yum -y update" to install all the latest updates. Is there a way to set up the kickstart server so that I can do this all in one step? In other words, is there a "supported" way to roll in all the updates into the kickstart server? In case it matters, I set up the kickstart server by copying the contents of all CentOS 4.4 CDs (well, from the ISO images actually) into one directory, and then configuring the kickstart file to point to that URL (via http). Thanks, Alfred

10 14

USB 2 card
by Jamie Lists 05 Mar '07

05 Mar '07

Were looking to hook up a Lacie 2TB external drive to be our little rdiff-backup volume and we need a usb 2 interface. Can anyone make a suggestion to a good USB2 PCI card for centos? Thanks, James

3 2

Re: [CentOS] Sending traffic through Secondary IP Address
by Al Sparks 05 Mar '07

05 Mar '07

>> How would I, say, use nmap to do something like that? Is >> there a generic way to force a particular program to use a >> secondary IP address instead of the default primary? >> > <snip> >> >> But how about those programs that don't? >> === Al >> >> > > The only *generic* way that I know of, is to use IPTables to > source-NAT your outbound connections. This will work OK if you > have specific services in mind, you could just SNAT based on > Destination port.can't remember off the top of my head if > IPTables can mangle traffic based on the application...I seem to > remember no, tho. > > This would not work so good for nmap example you gave > unfortunteatly. That's actually intriguing. I think I'll try it out sometime. In any case, the ping solution provided by Dennis will meet my needs in this particular case. Thanks to you both. === Al

1 0

Help with mail and attachments
by Blaž Bogataj 05 Mar '07

05 Mar '07

I use postfix mail server with Maildir. I would like the system to save automaticaly content only of those mails which contain a certain word into the file in /home/userdir/. I would also like to save *.pdf and other attachements to directory. Looking forward for your help Best regards Blaž

1 0

RE: [CentOS] Lame question about cp
by THOMAS, Mervyn 05 Mar '07

05 Mar '07

Try this: \cp from to IIRC, cp is an alias that translates to cp -i, I believe rm and mv are the same. Entering the leading \ overrides the alias. Hope that helps. Happy trails, Merv -----Original Message----- From: Mike McCarty [mailto:Mike.McCarty@sbcglobal.net] Sent: Monday, March 05, 2007 6:06 PM To: CentOS mailing list Subject: Re: [CentOS] Lame question about cp Paul Krash wrote: > Mario (?) wrote: > > >>How can i copy a file to another with the same name without being >>prompted for a confirmation, and -f doesn't work? > > > Unalias cp doesn't work....hmmm. How about $ which cp He may have some script sth. Mike -- p="p=%c%s%c;main(){printf(p,34,p,34);}";main(){printf(p,34,p,34);} Oppose globalization and One World Governments like the UN. This message made from 100% recycled bits. You have found the bank of Larn. I can explain it for you, but I can't understand it for you. I speak only for myself, and I am unanimous in that! _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos This email (including any attachments) may contain confidential and/or privileged information or information otherwise protected from disclosure. If you are not the intended recipient, please notify the sender immediately, do not copy this message or any attachments and do not use it for any purpose or disclose its content to any person, but delete this message and any attachments from your system. Astrium disclaims any and all liability if this email transmission was virus corrupted, altered or falsified. --------------------------------------------------------------------- Astrium Limited, Registered in England and Wales No. 2449259 Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England

4 3

CentOS 4.4 not seeing all RAM
by Kanwar Ranbir Sandhu 05 Mar '07

05 Mar '07

Hi Everyone, My server is only seeing 4.8 GB out of 6 GB available. I don't know why. I have a CentOS 4.4 x86_64 server running on a Tyan s2895 with 6 GB of RAM (two 1 GB sticks and 2 2 GB sticks). I upgraded the RAM, powered up the server, and when CentOS was finished booting, checked the available RAM with free. This is what it's reporting: total used free shared buffers cached Mem: 4809064 4769492 39572 0 197156 3127704 -/+ buffers/cache: 1444632 3364432 Swap: 2064376 176 2064200 The BIOS sees all of the RAM. In fact, it looks to me like the kernel knows 6 GB is available. But, it is only using 4.8 GB because I see this in dmesg: Memory: 4808464k/6291456k available (2106k kernel code, 0k reserved, 1299k data, 196k init) What happened to the other 1 GB+ of RAM? BTW, the server isn't running all the newest updates, but it is running the latest CentOS 4 kernel (2.6.9-42.0.10.ELsmp). Regards, Ranbir -- Kanwar Ranbir Sandhu Linux 2.6.19-1.2911.fc6 i686 GNU/Linux 11:39:08 up 2 days, 10:28, 2 users, load average: 1.18, 0.64, 0.60

7 10

Sending traffic through Secondary IP Address
by Al Sparks 05 Mar '07

05 Mar '07

I have set up a secondary IP address in the same network as my primary. So eth0: 192.168.100.29 netmask 255.255.255.0 eth0:0 192.168.100.45 netmask 255.255.255.0 And indeed when I invoke an apache instance that listens on the secondary IP address/interface it works, and it also makes it outside the LAN since the default gateway is defined in the routing tables for 192.168.100.0/24. But I'd like to be able to send out some sort of broadcast on the network from that secondary interface so that the arp tables on various devices on the network get updated. How would I, say, use nmap to do something like that? Is there a generic way to force a particular program to use a secondary IP address instead of the default primary? Obviously, something like BIND or Apache httpd has that hardcoded in so that you can tell them to use secondaries via their configuration files. But how about those programs that don't? === Al

3 2

Lame question about cp
by Mário Gamito 05 Mar '07

05 Mar '07

Hi, How can i copy a file to another with the same name without being prompted for a confirmation ? I read the cp man page, but nada. Any help would be appreciated. Warm Regards, Mário Gamito

11 13

CentOS-announce Digest, Vol 25, Issue 2
by centos-announce-request＠centos.org 05 Mar '07

05 Mar '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0078 Critical CentOS 4 s390(x) thunderbird - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Sun, 4 Mar 2007 22:38:18 +0200 From: Pasi Pirhonen <upi(a)centos.fi> Subject: [CentOS-announce] CESA-2007:0078 Critical CentOS 4 s390(x) thunderbird - security update To: centos-announce(a)centos.org Message-ID: <20070304203818.GA14147(a)centos.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2007:0078 https://rhn.redhat.com/errata/RHSA-2007-0078.html The following updated files have been uploaded and are currently syncing to the mirrors: s390: updates/s390/RPMS/thunderbird-1.5.0.10-0.1.el4.centos.s390.rpm s390x: updates/s390x/RPMS/thunderbird-1.5.0.10-0.1.el4.centos.s390x.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://pasi.pirhonen.eu/ Top-postings silently ignored

1 0

Virtualisation
by Stephen Harris 05 Mar '07

05 Mar '07

I'm building a new server at home to handle most of my internal requirements (mail, news, dns, dhcp, backups being the biggies). I also want it to host a couple of virtual servers which are allowed incoming connections from the internet (mail gateway, web server, ssh server); these are virtual so if a hacker _can_ break in then they're limited as to what they can see. At present the virtual machines are vserver instances on an old FC2 box. I'm wondering what people recommend for virtual servers these days? CentOS 4 with a vserver kernel? Wait for CentOS 5 and use Xen? VMware? (Vmware is the heavy solution, but it does mean I could host a windows session if I wanted to). Or Solaris 10 and zones? Any thoughts? -- rgds Stephen

23 36

The most weird thing i've ever seen (networking)
by Mário Gamito 05 Mar '07

05 Mar '07

Hi, I've installed a mail server using CentOS 4.4 Now, if i reboot the server remotely by ssh, when it cames up, i have no network. The interface is up and everything looks pretty fine. But i can't even ping other machines in the same intranet. If i reboot it locally at the console, the network cames just fine. Never seen nothing like this. The mind boggles :( Any ideas ? Warm Regards, Mário Gamito

7 6

Flash por x64
by Dago Pacheco 05 Mar '07

05 Mar '07

Hi.. I'm using centos 4 over a x64 PC and i want to use flash.... what do i must to do? Thanks -- ________________________ Dago Pacheco Encargado de Informática Maetranza Makimet Ltda.

7 17

CentOS 4.4 lvm and drbd 0.8?
by Chuck Mattern 04 Mar '07

04 Mar '07

I'm running CentOS 4.4 and drbd 0.7 with ext3 filesystems on the drbd device. I'm very interested in moving to drbd 0.8 and pulling my all of my drbd devices into one lvm for greater flexibility in filesystems. I've seen some notes on doing this but wonder if anyone on this list has a cookbook for doing this. Also noted that on the drbd site the only packages they have are set up for the 2.6.9-34.106 kernel. Any thoughts on when there might be a drbd .8 package for the current kernel? Thanks for any wisdom on this, Chuck

4 11

CentOS-announce Digest, Vol 25, Issue 1
by centos-announce-request＠centos.org 04 Mar '07

04 Mar '07

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2007:0078 Critical CentOS 4 x86_64 thunderbird - security update (Johnny Hughes) 2. CESA-2007:0078 Critical CentOS 4 i386 thunderbird - security update (Johnny Hughes) 3. CESA-2007:0078 Critical CentOS 4 ia64 thunderbird - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Sun, 04 Mar 2007 05:06:21 -0600 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2007:0078 Critical CentOS 4 x86_64 thunderbird - security update To: CentOS-Announce <centos-announce(a)centos.org> Message-ID: <1173006381.5147.133.camel(a)myth.home.local> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2007:0078 https://rhn.redhat.com/errata/RHSA-2007-0078.html The following updated files have been uploaded and are currently syncing to the mirrors: x86_64: thunderbird-1.5.0.10-0.1.el4.centos.x86_64.rpm src: thunderbird-1.5.0.10-0.1.el4.centos.src.rpm

1 0

php-4.4 rpm
by Michael Kress 04 Mar '07

04 Mar '07

Hi, has somebody already succeeded in creating a php-4.4 rpm under centos-4.4? php version 4.3.9 compiles perfectly, but taking the 4.3.9 spec and replacing the source tar.gz (and omitting the patches) doesn't work at all. I could provide you with details about compile errors, but I think I should check the availability of a 4.4 package before trashing you with details. TIA Regards Michael -- Michael Kress, kress(a)hal.saar.de http://www.michael-kress.de / http://kress.net P E N G U I N S A R E C O O L

3 4

Bind src.rpm from CentOS or RHEL 5 beta
by Florin Andrei 04 Mar '07

04 Mar '07

Anybody knows where can I find the src.rpm package with Bind that was included in the RHEL5 beta (or in the upcoming CentOS 5 beta)? I assume it's legal to download and rebuild this src.rpm since the license is GPL, right? -- Florin Andrei http://florin.myip.org/

2 1

Re: [CentOS] Making VNC run on port 8080 on Centos 3.4
by Randy Zagar 03 Mar '07

03 Mar '07

This is part of my documentation for VNC under RHEL-4. All of the configuration file changes below were originally formatted as "diff -u" patches. Email may have mangled them, so beware. I assume standard gnome desktop packages have been installed, if you want another desktop manager you'll have to figure out how to configure that yourself. I frequently use vncviewer -via secure.vnc.host localhost:50 to tunnel VNC over an SSH session Here's the text: =Managing VNC Sessions With Xinetd= There is an old protocol for managing remote displays on X-Terminals called XDMCP (X11 Display Manager Control Protocol). Never heard of an X-Terminal? Well, that's no surprise... X-Terminals are sooo 20-th century... Everybody calls them Thin Clients now. Fortunately, old protocols never die and every once in a while we get to recycle them. What we are going to do is configure a VNC service that's controlled by XInetd. That way, a VNC server process only gets started when somebody asks for one... And since we're enabling XDMCP support for the Gnome Display Manager (GDM), each VNC client connection will get a graphical gdm login screen. It doesn't result in a persistent session, but it's much easier to configure and maintain. ==Linux Configuration Files== ===/etc/X11/xdm/xdm-config=== --- /etc/X11/xdm/xdm-config 2006/02/14 04:33:24 1.1 +++ /etc/X11/xdm/xdm-config 2006/02/14 04:33:58 @@ -29,4 +29,4 @@ ! SECURITY: do not listen for XDMCP or Chooser requests ! Comment out this line if you want to manage X terminals with xdm -DisplayManager.requestPort: 0 +!DisplayManager.requestPort: 0 ===/etc/X11/xdm/Xaccess=== --- /etc/X11/xdm/Xaccess 2006/02/14 04:36:27 1.1 +++ /etc/X11/xdm/Xaccess 2006/02/14 04:36:39 @@ -37,7 +37,7 @@ # right hand sides can match. # -# * #any host can get a login window +* #any host can get a login window # # To hardwire a specific terminal to a specific host, you can ===/etc/X11/gdm/gdm.conf=== ====Enabling XDMCP access for VNC clients==== --- gdm.conf 2006/02/14 04:39:09 1.1 +++ gdm.conf 2006/04/05 17:07:05 1.2 @@ -207,7 +207,7 @@ # allow local access is another alternative but not the safest. # Firewalling port 177 is the safest if you wish to have xdmcp on. # Read the manual for more notes on the security of XDMCP. -Enable=false +Enable=true # Honour indirect queries, we run a chooser for these, and then redirect # the user to the chosen host. Otherwise we just log the user in locally. #HonorIndirect=true ====Supporting X11 connections over TCP==== This is normally disabled, but as long as you're on a protected network it's convenient to run X11-based programs on remote hosts and display them locally. It is possible to do this over SSH, but there is some overhead... --- gdm.conf 2006/04/05 17:07:05 1.2 +++ gdm.conf 2006/04/05 17:07:52 @@ -187,7 +187,7 @@ # Note: Anytime we find a -query or -indirect on the command line we do # not add a "-nolisten tcp", as then the query just wouldn't work, so # this setting only affects truly local sessions. -#DisallowTCP=true +DisallowTCP=false # By default never place cookies if we "detect" NFS. We detect NFS # by detecting "root-squashing". It seems bad practice to place # cookies on things that go over the network by default and thus we ===/etc/services=== --- /etc/services 2006/02/14 04:40:03 1.1 +++ /etc/services 2006/02/14 04:40:51 @@ -577,4 +577,6 @@ fido 60179/udp # Ifmail # Local services - +# +vnc-1280x1024 5950/tcp # VNC @ 1280x1024 +# ===/etc/xinetd.d/xvncserver=== service vnc-1280x1024 { protocol = tcp socket_type = stream wait = no user = nobody server = /usr/bin/Xvnc server_args = -inetd -query localhost -once -geometry 1280x1024 -depth 24 securitytypes=none } ==Restarting The Gnome Display Manager== The easiest way to do this is to log into a text console (Ctrl-Alt-F1), and running these commands init 3 init 5 /sbin/service xinetd stop /sbin/service xinetd start

1 0

Ethernet not working
by Mike Noble 03 Mar '07

03 Mar '07

I have just installed CentOS 4.4 and can't get the ethernet to work Ethernet is built into the motherboard: Marrvell Technology Ltd. 88E8001 Gigabit Ethernet Controler (reported by Network Configuration) It shows the device is active. using static address /etc/resolv.conf is setup correctly The problem is that I can not talk to anything outside the system. This has worked with Mandriva, Fedora, SuSe and gentoo. Mike

7 10

RPMs
by Mário Gamito 03 Mar '07

03 Mar '07

Hi, I think my problem is related to the way i make my RPMs (i'm newbie at this). Two things: 1) the generated RPMs are only 1,5 kb size. That's inpossible. 2) The rpmbuild -ba zbr.spec indeed installs the software in the building stage. That's odd, isn't it ? Following my signature is an openssl.spec file Any help would be appreciated. Warm regards, Mário Gamito -- Summary: OpenSSL Name: openssl Version: 0.9.8b Release: 6 Source0: %{name}-%{version}.tar.gz License: GPL Source: http://www.mirrorservice.org/sites/ftp.openssl.org/source/openssl-0.9.8b.ta… Group: Applications/Communications %description OpenSSL provides encryption for Apache, SMTP, POP3 and IMAP. %prep %setup -q %build ./config no-idea shared make depend make %install make install echo "\n \n Let's create the CA and the key for Apache/HTTPS: \n \n" /usr/local/ssl/bin/openssl genrsa -des3 -out /usr/local/ssl/bin/ca.key 1024 /usr/local/ssl/bin/openssl req -new -x509 -days 365 -key /usr/local/ssl/bin/ca.key -out /usr/local/ssl/bin/ca.crt /usr/local/ssl/bin/openssl genrsa -des3 -out /usr/local/ssl/bin/server.key 1024 /usr/local/ssl/bin/openssl req -new -key /usr/local/ssl/bin/server.key -out /usr/local/ssl/bin/server.csr echo "\n \n Now for POP3/SSL and IMAP/SSL: \n \n" /usr/local/ssl/bin/openssl req -new -x509 -days 365 -nodes -out /usr/local/ssl/bin/imapd.pem -keyout /usr/local/ssl/bin/imapd.pem || cleanup /usr/local/ssl/bin/openssl gendh >> /usr/local/ssl/bin/imapd.pem || cleanout /usr/local/ssl/bin/openssl x509 -subject -dates -fingerprint -noout -in /usr/local/ssl/bin/imapd.pem || cleanup cp /usr/local/ssl/lib/libcrypto.so.0.9.8 /lib %changelog * Fri Feb 02 2007 Mário Gamito <gamito(a)gmail.comm> 0.9.8.b-2 - fixed to prompt for the CA and the server.key for Apache and cert for POP3/IMAP * Fri Feb 02 2007 Mário Gamito <gamito(a)gmail.comm> 0.9.8.b-3 - fixed to place the CA and server files in the right place * Fri Feb 02 2007 Mário Gamito <gamito(a)gmail.comm> 0.9.8.b-4 - copied libcrypto.so.0.9.8 to /lib. qmail-ldap will need that later.

3 2

RE: [CentOS] My current directory is lost in a bash shell
by Robert Becker Cope 03 Mar '07

03 Mar '07

Theo Band <theo.band(a)xanadu-wireless.com> wrote: > [thba@vink layout]$ nc script/xw_functions.ample > NEdit: getcwd() fails: No such file or directory > NEdit: getcwd() fails: No such file or directory > [thba@vink layout]$ ll script/xw_functions.ample > -rw-rw-r-- 1 thba thba 16829 Oct 25 16:59 script/xw_functions.ample > [thba@vink layout]$ pwd > /home/thba/workarea/colibri/design/ana/layout > [thba@vink layout]$ /bin/pwd > /bin/pwd: cannot get current directory: No such file or directory This is typical when the directory you are in has been removed out from under you. Try this: Log into two shells (or use screen, or whatever), A and B. In A, do "cd ~; mkdir -p xxx/yyy; cd xxx/yyy; touch 123; ls -l 123". Then, in B, do "cd ~; rm -rf xxx". Finally, back in A, repeat what you did above, "ls -l 123; pwd; /bin/pwd". You will find the behavior is the same. Good luck, robert

3 2

Skype on CentOS??
by Doc Schneider 03 Mar '07

03 Mar '07

I'm just curious if Skype will work on CentOS? They have all kinds of FC rpms but which one to install? I'm running CentOS 4.4 I tried the Live CD just to test and it didn't want to find my sound card (Tried the sound card detection on the CD). But, I'm sure, that is a configuration issue and can be works out with ALSA. TIA, -- -Doc Lincoln, NE. http://www.genealogyforyou.com/ http://www.cairnproductions.com/

4 3

My current directory is lost in a bash shell
by Theo Band 03 Mar '07

03 Mar '07

This one puzzles me a lot: [thba@vink layout]$ nc script/xw_functions.ample NEdit: getcwd() fails: No such file or directory NEdit: getcwd() fails: No such file or directory [thba@vink layout]$ ll script/xw_functions.ample -rw-rw-r-- 1 thba thba 16829 Oct 25 16:59 script/xw_functions.ample [thba@vink layout]$ pwd /home/thba/workarea/colibri/design/ana/layout [thba@vink layout]$ /bin/pwd /bin/pwd: cannot get current directory: No such file or directory This error occurs in a bash shell on a regular basis. The funny thing is that I can just access the file by cat: cat script/xw_functions.ample works fine (I get the content of the file). To solve it for this shell I do this: [thba@vink layout]$ cd [thba@vink ~]$ cd - /home/thba/workarea/colibri/design/ana/layout [thba@vink layout]$ nc script/xw_functions.ample And it is fine again. This is a home nfs share mounted with these options: arend:/export/home /home nfs proto=tcp,nfsvers=3,bg,defaults 0 0 Both on the NFS server as on this client I see any errors or warning in any log. All kind of applications are affected by this problem so I need to dig into this deeper. Server: FC3 client: CENTOS4.4 Any help is appreciated. Thanks, Theo

1 0

Re: [CentOS] Lame question about cp
by Mário Gamito 03 Mar '07

03 Mar '07

Hi, Jim Perrin wrote: > -f should allow you to do this. For root, cp is aliased to cp -i, so > you can either set the alias the way you want, or you can do '\cp foo > bar' without the ticks, which tells the system to ignore the alias > for the command. It doesn't work. I already tried that before posting. >> Any help would be appreciated. > > No applause, just throw money. :-P Ah, ah... you don't deserve it :) LOL :) Regards, Mário Gamito

5 4

Swap Considerations
by Mike McCarty 03 Mar '07

03 Mar '07

I am considering installing CentOS 4.4, and am interested in how best to set up. I have been using FC2 and helping administer a Debian machine for a few years, but do not consider myself a Linux guru. My current set up uses a /swap partition which is 2x my memory size mem = 256 MB $ sudo /sbin/fdisk -l /dev/hda6 76506 77545 524128+ 82 Linux swap I'm interested in the use of a file for swap, as I hear that there is now no speed penalty for that. I use ext3 for my partitions. I'm also interested in whether it be reasonable/desirable to make /home, /tmp, and /var be on a separate partition. I have heard arguments on both sides, some claiming that with ext3 the system won't become unbootable because of /tmp filling up. Anyone care to weigh in? Mike -- p="p=%c%s%c;main(){printf(p,34,p,34);}";main(){printf(p,34,p,34);} Oppose globalization and One World Governments like the UN. This message made from 100% recycled bits. You have found the bank of Larn. I can explain it for you, but I can't understand it for you. I speak only for myself, and I am unanimous in that!

20 55

Build a special RPM
by Mário Gamito 03 Mar '07

03 Mar '07

Hi, I want to build a single RPM that has more than one software in it and a different name from them. Let's imagine for the sake of example that i want to make an RPM called databases.rpm that installs both MySQL and Postgres. How can i do this with a single spec file ? I've googled for an hour or two and found no info about this issue. Can someone enlighten me, please ? WarmRegards, Mário Gamito

3 2

kernel issues
by William Warren 03 Mar '07

03 Mar '07

I just had to revert from the latest kernel back to .08 due to panics. i used rpm to remove the .10 kernel. However i know can't get the smp version of the .10 kernel to install via yum. What am i missing? -- My "Foundation" verse: Isa 54:17 No weapon that is formed against thee shall prosper; and every tongue that shall rise against thee in judgment thou shalt condemn. This is the heritage of the servants of the LORD, and their righteousness is of me, saith the LORD. -- carpe ductum -- "Grab the tape" CDTT (Certified Duct Tape Technician) Linux user #322099 Machines: 206822 256638 276825 http://counter.li.org/

1 2

RE: [CentOS] Virtualisation
by Mark Hull-Richter 02 Mar '07

02 Mar '07

How memory-intensive is VMWare workstation? I have a P4 3.0GHz with 1/2Gb of memory at home - is VMWare going to be a total drag on the system or is it lightweight enough that I can still run (as opposed to walk or crawl)? I run VMWW at work, but that's a Pentium-D with 2Gb of RAM, and top shows vmware using 199m virt, 1.1g res and 1.1g shr - not sure what that means (but it looks like bad news for the home situation...). Thanks.

2 1

errors
by William Warren 02 Mar '07

02 Mar '07

for most of you this is going to be simple for me it's new: I have a ssytem that suddenly throws this error after the most recent kernel upgrade: http://img172.imageshack.us/my.php?image=errordh4.jpg I'm thinking i should be able to back the sytem off to the previous kernel. How do i do this since it won't boot? -- My "Foundation" verse: Isa 54:17 No weapon that is formed against thee shall prosper; and every tongue that shall rise against thee in judgment thou shalt condemn. This is the heritage of the servants of the LORD, and their righteousness is of me, saith the LORD. -- carpe ductum -- "Grab the tape" CDTT (Certified Duct Tape Technician) Linux user #322099 Machines: 206822 256638 276825 http://counter.li.org/

1 1

Re: [CentOS] What is cached swap?
by C. Halstead 02 Mar '07

02 Mar '07

That number is the amount of physical memory that is being used by cache buffers for your filesystems. It has nothing to do with swap. Try this trick: Run top and note the value of 'cached' run 'dd if=/dev/zero of=~/test bs=1M count=256' Run top again and see that 'cached' has grown by 256M remove the file ~/test Run top again and see that the value of 'cached' has dropped by 256M With that said, there is a 'SwapCached' value reported in /proc/meminfo that represents the amount of swap space used by pages that are also in physical mem (like if something was swapped out and then back in). The VMM doesn't clear those swap pages unless they are needed or the process terminates. Cheers, -chris --- C. Halstead <chris(a)sourcelabs.com> SourceLabs - http://www.sourcelabs.com Dependable Open Source Systems ----- "Mike McCarty" <Mike.McCarty(a)sbcglobal.net> wrote: > Isn't cached swap somewhat an oxymoron? Why cache virtual? > Am I misunderstanding this line from top? > > Swap: 524120k total, 80760k used, 443360k free, 73448k > cached > > Mike > -- > p="p=%c%s%c;main(){printf(p,34,p,34);}";main(){printf(p,34,p,34);} > Oppose globalization and One World Governments like the UN. > This message made from 100% recycled bits. > You have found the bank of Larn. > I can explain it for you, but I can't understand it for you. > I speak only for myself, and I am unanimous in that! > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos

1 0

setting up incoming PPP on centos 4.4
by fredex 02 Mar '07

02 Mar '07

hi gang! I'm interested in setting up incoming PPP on a system at work that has a fresh (not upgrade) Centos 4.4 on it. All the documentation I've found for that shows using mgetty to do it, and seems pretty straightforward. However, that machine doesn't have a binary named mgetty anywhere. It does have a mgetty-sendfax RPM installed, but it does not provide a binary named mgetty. "yum -list available | grep -y getty" shows no additional packages I could use to obtain it. so, how does one set up incoming PPP on Centos 4.4? (I've searched the RH knowledgebase and all I found there that came close was a very nice document on doing it on RHEL 3, which shows how to do it with mgetty. Catch 22.) Thanks! -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- The eyes of the Lord are everywhere, keeping watch on the wicked and the good. ----------------------------- Proverbs 15:3 (niv) -----------------------------

2 2

Off-topic: Howto decrypt OpenSSL file in Win32 environment
by Jordi Espasa Clofent 02 Mar '07

02 Mar '07

Hi all, I supose the subject is descriptive enough. In a CentOS server I do the next to make the daily backups: tar cfv - dir_data/ | openssl enc -e -salt -aes256 -pass pass:$PASSWORD -out backup_file.bin So I get an well-encrypted and tared file. If I want to decrypt and the file is easy in Unix/Linux environment: openssl enc -d -aes256 -in backup_file.bin | tar xfv - -C dir_what_you_want/ But the problem I currently have is I don't know how to make it in Win environment. ?¿?

2 2

Help Regarding Badblocks check in kick start installation very
by balajisundar＠midascomm.com 02 Mar '07

02 Mar '07

Dear All, In Redhat 7.2 kick start installation,badblocks check for HDD is working on creating partition. But in Centos badblocks check is not working in kick start installation. Badblocks check command in kickstart file part / --fstype ext3 --badblocks --size 1000 part /home --fstype ext3 --badblocks --size 12000 part /usr --fstype ext3 --badblocks --size 9000 part swap --size 1000 part /backup --fstype ext3 --badblocks --size 12000 --grow Please send me a solution for badblocks check command for CentOS and please help me it is very urgent reply immediatly to solve this. --Regards S.Balaji

2 1

Storage/SCSI Error on our CentOS server
by Hairul Ikmal Mohamad Fuzi 02 Mar '07

02 Mar '07

Hi, Currently we are running CentOS 4.x on a 2-way Opteron machine. This machine, through a SCSI host adapter (Adaptec), is connected to a 2TB storage unit (an external RAID-5 disk array) Until our recent unintentional power trip, everything was fine and smooth. We have been experiencing complication accessing the storage ( it could be either intermittent filesystem error, partition could not be mounted in read-write mode, unacceptable writing speed, etc ), especially when we start to 'write' on the storage. After a few check, we are suspecting either : 1) the storage unit (but the storage control panel did not report any disk/raidset failure) is failing or, 2) the SCSI host adapter is failing, or 3) the filesystem itself is corrupted (we did 'fsck.ext3 -v -f' but it turned out it did not find any errors) ..but we are not sure which one.We did received 'messages' which we never experience previously in our 'dmesg' . (please refer below) Based on the above info and the below 'dmesg' output, we'd appreciate if somebody could share and help us to identify what actually went wrong and how could fix it (if possible)? TIA. -Ikmal Dmesg output : =========================================== scsi4:0:0:0: Attempting to abort cmd 0000010082297a80: 0x28 0x0 0x0 0x0 0x1 0x3f 0x0 0x0 0x8 0x0 scsi4: At time of recovery, card was not paused >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi4: Dumping Card State at program address 0xc Mode 0x33 Card was paused HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0xc0] SEQ_FLAGS2[0x0] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 59 qinfifonext = 59 QINFIFO: WAITING_TID_QUEUES: Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x64] SCB_SCSIID[0x7] Total 1 Kernel Free SCB list: 3 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: scsi4: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi4: FIFO1 Free, LONGJMP == 0x81d8, SCB 0x3 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi4: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi4: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 SIMODE0[0xc] CCSCBCTL[0x0] scsi4: REG0 == 0xffff, SINDEX = 0x1e0, DINDEX = 0xe1 scsi4: SCBPTR == 0x3, SCB_NEXT == 0x2, SCB_NEXT2 == 0x2 CDB 28 0 0 80 19 ac STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> DevQ(0:0:0): 0 waiting (scsi4:A:0:0): Device is disconnected, re-queuing SCB Recovery code sleeping Recovery SCB completes Recovery code awake scsi4: Transmission error detected LQISTAT1[0x0] LASTPHASE[0x1] SCSISIGI[0x0] PERRDIAG[0x1] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< scsi4: Dumping Card State at program address 0x26 Mode 0x11 Card was paused HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33] SCSISIGI[0x1a] SCSIPHASE[0x1] SCSIBUS[0xff] LASTPHASE[0x1] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0xc0] SEQ_FLAGS2[0x0] SSTAT0[0x10] SSTAT1[0x11] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 qinstart = 61 qinfifonext = 61 QINFIFO: WAITING_TID_QUEUES: 0 ( 0x2 ) Pending list: 2 FIFO_USE[0x0] SCB_CONTROL[0x50] SCB_SCSIID[0x7] Total 1 Kernel Free SCB list: 3 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: scsi4: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x1] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] scsi4: FIFO1 Free, LONGJMP == 0x81d8, SCB 0x3 SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x1] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 scsi4: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 scsi4: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 SIMODE0[0xc] CCSCBCTL[0x4] scsi4: REG0 == 0x3, SINDEX = 0x11d, DINDEX = 0xe1 scsi4: SCBPTR == 0x3, SCB_NEXT == 0x2, SCB_NEXT2 == 0x2 CDB 28 0 0 80 19 ac STACK: 0x13 0x0 0x0 0x0 0x0 0x0 0x0 0x0 <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> DevQ(0:0:0): 0 waiting (scsi4:A:0): 80.000MB/s transfers (40.000MHz DT, 16bit) ===========================================

3 5

Making VNC run on port 8080 on Centos 3.4
by ankush grover 02 Mar '07

02 Mar '07

Hi Friends, I am trying to run vnc on port 8080 on Centos 3.4 . There are no kde or gdm packages installed as we only need xserver. I have installed XFree86-font-utils-4.3.0-78.EL XFree86-75dpi-fonts-4.3.0-78.EL XFree86-base-fonts-4.3.0-78.EL XFree86-xdm-4.3.0-78.EL XFree86-libs-data-4.3.0-78.EL XFree86-4.3.0-78.EL XFree86-libs-4.3.0-78.EL XFree86-xfs-4.3.0-78.EL XFree86-Mesa-libGL-4.3.0-78.EL XFree86-xauth-4.3.0-78.EL XFree86-truetype-fonts-4.3.0-78.EL XFree86-Mesa-libGLU-4.3.0-78.EL XFree86-100dpi-fonts-4.3.0-78.EL vnc vnc-server and I want to run vnc only one for 1 user but with multipe client connections. Plesae guide me how to configure VNC to run on port 8080 and for only 1 user. Thanks & Regards Ankush Grover

3 5

Badblocks check in kick start installation very urgent
by balajisundar＠midascomm.com 02 Mar '07

02 Mar '07

Dear All, In Redhat 7.2 kick start installation,badblocks check for HDD is working on creating partition. But in Centos badblocks check is not working in kick start installation. Badblocks check command in kickstart file part / --fstype ext3 --badblocks --size 1000 part /home --fstype ext3 --badblocks --size 12000 part /usr --fstype ext3 --badblocks --size 9000 part swap --size 1000 part /backup --fstype ext3 --badblocks --size 12000 --grow Please send me a solution for badblocks check command for CentOS and please help me it is very urgent reply immediatly --Regards S.Balaji

1 0

RE: [CentOS] virtualizing Windows in Cetnos
by Robert Becker Cope 02 Mar '07

02 Mar '07

William Warren <hescominsoon(a)emmanuelcomputerconsulting.com> wrote: > Here is what i am looking to do. i have a server SBS 2k3 machine. I > want to load linux on it then virtualize the SBS server inside the > linux installation. I would then be able to compress backup just the Check out VMware Server, a free product from VMware. I believe you can buy support for the product for them, if you need it. Qemu might be a truely OSS solution. I personally have not used it in quite a long time, though, but I've heard it can be reasonable when used with the accelerator module. robert

9 10

php 4.3.9-3.22.3 Spec file
by Matthew Martz 01 Mar '07

01 Mar '07

Anyone know where I can get the spec file for the current php package? Thanks! -- Matthew Martz CentOS Mirror Admin mdmartz(a)gflug.net

2 1

Upgraded BackupPC (3.0.0) in the Testing Repository
by Johnny Hughes 01 Mar '07

01 Mar '07

There is an upgraded BackupPC in the testing repository. It is version 3.0.0, which was released in January. The setup differences between version 2.1.2 and this version is that some file directories have shifted locations: 1. /var/lib/backuppc/conf is now instead /etc/BackupPC/ 2. /var/lib/backuppc/log is now /var/log/BackupPC =============================== If you are upgrading ... you _CAN_NOT_ just copy your old config.pl config file into /etc/BackupPC can continue on ... you need to migrate in any changes that you made to original file to this config.pl file as there are updated options in the new file. How is the best way to do that ... you did save a copy of the original file prior to changing it ... right :P If not ... here is what I did: ----commands---- cd /tmp mkdir backuppc cd backuppc wget http://dev.centos.org/centos/4/testing/i386/RPMS/backuppc-2.1.2-3.c4.centos… rpm2cpio backuppc-2.1.2-3.c4.centos4.i386.rpm | cpio -idv ----end commands----- You should be in /tmp/backuppc and you should see all the files (extracted) from the original RPM in there ... inside the /tmp/backuppc/var/lib/backuppc/conf/ should be an original config.pl file. You can use that file to create a diff file that you can read to make changes to the new config.pl file. here is what I did prior to upgrade: ----commands---- cd /var/lib/backkuppc/ cp -a conf conf.bak cp -a logs logs.bak cd conf.bak cp /tmp/backuppc/var/lib/backuppc/conf/config.pl config.pl.orig diff config.pl.orig config.pl > config.pl.diff ----end commands---- Now you are ready to upgrade ... you will need to enable the testing repo to do the upgrade (or download the files manually and install manually via RPM). How to do the upgrade via yum: Put the testing repo file into /etc/yum.repos.d/ : http://dev.centos.org/centos/4/CentOS-Testing.repo (the file is disabled by default) Once you have the file in place, use this command: ----commands---- yum --enablerepo=c4-testing upgrade backuppc perl-Compress-Zlib perl-File-RsyncP perl-Time-modules perl-XML-RSS ----end commands---- (that command in all on one line if it wraps in your mail client) You can use that diff file from above to manually add new changes to the /etc/BackupPC/config.pl file after upgrade. Also after upgrade, you can move all the files in /var/lib/backuppc/log/ to /var/log/BackupPC/ Once everything is configured ... restart backuppc and httpd Once everything is working, you can get rid of the following directories in "/var/lib/backuppc/" ... conf, conf.bak, log, log.bak If you are installing new, replace "upgrade" with "install" in the above yum command ... and see the README.centos file in /usr/share/doc/backuppc-3.0.0/ after install Here is the original announcement, which also has good info: http://lists.centos.org/pipermail/centos-devel/2006-April/002216.html Thanks, Johnny Hughes

6 6

DVD rom questions
by Steve Campbell 01 Mar '07

01 Mar '07

I'm running CentOS 3 and have just installed a Liteon lightscribe DVD/CD unit. I firstly realized I didn't know exactly how to mount it, as /dev/dvd didn't exist, I didn't want to generate anything if it already existed, and I didn't want to mess up my cdrom unit that works just fine. I mounted the device though the X window just to see how it might mount, and find that it mounts /dev/cdrom1 on /mnt/cdrom1, regardless of what type media is in the drive. Does this sound proper? Should I mknod(?) something for the /dev/dvd device and if so, what should be the parms? I then tried to find a movie viewer on the machine, and only found mplayer. I couldn't get it to work properly due to the configuration options (not a very powerful machine). What does anyone use for a DVD viewer? And lastly, what are recommendations for implementing the lightscribe functions that exist on the drive? Any help is very graciously appreciated. Steve Campbell campbell(a)cnpapers.com Charleston Newspapers

3 2

Re: [CentOS] Virtualisation
by Stephen Harris 01 Mar '07

01 Mar '07

On Thu, Mar 01, 2007 at 12:33:21PM -0600, Robert Becker Cope wrote: > -----centos-bounces(a)centos.org wrote: ----- > > >At present the virtual machines are vserver instances on an old FC2 box. > > VMware has released VMware Server as a free product. It is worth looking at. I Yup, I mentioned that as an option on my initial list. I've got a test box running CentOS 4.4 and VMware. It's a heavy weight solution, but has advantages (I could potentially run Solaris 86 in a session, Windows in a session etc). > used to run a bunch of vserver instances, and while those did have some > interesting advantages, I ended up rebuilding everything using VMware Server as > I retired hardware. My reasons for this were simply that under VMware I could > run any OS and the experience was pretty much identical to having real > hardware. This was my preferred approach (mostly for the reasons you suggested) but the overkill of a whole VM for just an sshd process is what lead me to asking the question here in the first place. Thanks for your input! -- rgds Stephen

1 0

Add RAID after install in one disk
by Mário Gamito 01 Mar '07

01 Mar '07

Hi, I had this hard time installing a server with RAID 1 by software. I always got an error from GRUB and no booting. So, i've installed CentOS 4.4 normally in only one disk. Question is: is it possible now to make a RAID 1 by software with the other disk ? If so, how ? I'm completely lost here. Any help would be appreciated. Warm Regards, Mário Gamito

7 11

LDAP error
by Mário Gamito 01 Mar '07

01 Mar '07

Hi, When i try to inser this on LDAP database, i get this error: "ldapadd: invalid format (line 14) entry: "uid=spessoa,ou=users,ou=accounts,dc=telbit,dc=pt"" I can't see nothing wrong. The .ldif file follows my signature. Any help would be appreciated. Warm Regards, Mário Gamito -- dn: dc=telbit,dc=pt objectClass: top objectClass: dcObject objectClass: organization o: telbit.pt dc: telbit dn: cn=admin,dc=telbit,dc=pt objectClass: simpleSecurityObject objectClass: organizationalRole cn: admin description: LDAP administrator userPassword: {crypt}T7rvJYPW0bBVs dn: ou=accounts,dc=telbit,dc=pt objectClass: top objectClass: organizationalUnit ou: accounts description: Users dn: ou=sistemas,dc=telbit,dc=pt objectClass: top objectClass: organizationalUnit ou: sistemas userPassword: {MD5}aY3BnUicTk23PiinE+qwew== dn: cn=songoku,ou=sistemas,dc=telbit,dc=pt objectClass: top objectClass: device objectClass: ieee802Device objectClass: ipHost cn: songoku owner: uid=resteves,ou=accounts,dc=telbit,dc=pt macAddress: 00:13:D4:1D:E2:22 ipHostNumber: 192.168.30.66 o: Telbit dn: cn=masterx,ou=sistemas,dc=telbit,dc=pt objectClass: top objectClass: device objectClass: ieee802Device objectClass: ipHost cn: masterx owner: uid=hrodrigues,ou=accounts,dc=telbit,dc=pt description: Asus Pundit-R, Pentium 4 3G, 512MB, 80G macAddress: 00:11:2F:86:F2:21 ipHostNumber: 192.168.30.62 o: Telbit dn: cn=groo,ou=sistemas,dc=telbit,dc=pt objectClass: top objectClass: device objectClass: ieee802Device objectClass: ipHost cn: groo owner: uid=nferreira,ou=accounts,dc=telbit,dc=pt ipHostNumber: 192.168.30.60 o: Telbit dn: cn=gw-city,ou=sistemas,dc=telbit,dc=pt objectClass: top objectClass: device objectClass: ieee802Device objectClass: ipHost cn: gw-city macAddress: 00:04:75:FB:34:29 macAddress: 00:04:76:A1:3C:2F macAddress: 00:04:75:FB:34:56 macAddress: 00:D0:B7:2E:4C:4E ipHostNumber: 192.168.30.254 ipHostNumber: 192.168.90.252 ipHostNumber: 192.168.31.2 ipHostNumber: 192.168.33.253 owner: uid=psaborano,ou=accounts,dc=telbit,dc=pt manager: uid=psaborano,ou=accounts,dc=telbit,dc=pt description: Compaq deskpro Pentium III 500MHz cedido pela PTIN o: PTIN dn: cn=metropolis,ou=sistemas,dc=telbit,dc=pt objectClass: top objectClass: device objectClass: ieee802Device objectClass: ipHost cn: metropolis owner: uid=psaborano,ou=accounts,dc=telbit,dc=pt description: Pentium 4 2.40GHz, RAM=1G, 2xSATA 80G, 1xATA 80G, DVD+-RW macAddress: 00:0C:6E:13:65:3E ipHostNumber: 192.168.30.250 o: Telbit dn: cn=hda,cn=gw-city,ou=sistemas,dc=telbit,dc=pt objectClass: top objectClass: device cn: hda o: Telbit description: Disco 120GB (ST3120022A, ATA DISK drive) dn: cn=hda,cn=metropolis,ou=sistemas,dc=telbit,dc=pt objectClass: top objectClass: device cn: hda o: Telbit description: Disco de 80GB (ST380011A, ATA DISK drive) dn: cn=sda,cn=metropolis,ou=sistemas,dc=telbit,dc=pt objectClass: top objectClass: device cn: sda o: Telbit description: Disco 80GB (SATA) dn: cn=sdb,cn=metropolis,ou=sistemas,dc=telbit,dc=pt objectClass: top objectClass: device cn: sdb o: Telbit description: Disco 80GB (SATA) dn: cn=dvd,cn=metropolis,ou=sistemas,dc=telbit,dc=pt objectClass: top objectClass: device o: Telbit cn: dvd dn: cn=switch1,ou=sistemas,dc=telbit,dc=pt objectClass: top objectClass: device objectClass: ieee802Device objectClass: ipHost cn: switch1 description: HP Procurve Switch 2524 macAddress: 00:0A:57:0C:F7:80 ipHostNumber: 192.168.30.200 o: Telbit dn: ou=projectos,dc=telbit,dc=pt objectClass: top objectClass: organizationalUnit ou: projectos dn: ou=projectos,ou=accounts,dc=telbit,dc=pt objectClass: top objectClass: organizationalUnit ou: projectos description: Contas de email de projectos dn: uid=operacao.centaur,ou=projectos,ou=accounts,dc=telbit,dc=pt objectClass: top objectClass: person objectClass: inetOrgPerson objectClass: qmailUser sn:: T3BlcmHDp8OjbyBDZW50YXVy cn:: T3BlcmHDp8OjbyBDZW50YXVy mail: operacao.centaur(a)telbit.pt uid: operacao.centaur mailAlternateAddress: operacao.centaur(a)mail.telbit.pt mailAlternateAddress: operacao.centaur(a)metropolis.telbit.pt userPassword: {MD5}aOdpPfsu9maWY9xQnXmQRQ== mailMessageStore: /var/qmail/maildirs/opcentaur(a)telbit.pt/ dn: uid=suporte.centaur,ou=projectos,ou=accounts,dc=telbit,dc=pt objectClass: top objectClass: person objectClass: inetOrgPerson objectClass: qmailUser sn: Suporte cn: Suporte Centaur userPassword: {SHA}2xubExVzYyYev6WzvrlwXIY34Gk= mail: suporte.centaur(a)telbit.pt uid: suporte.centaur mailAlternateAddress: suporte.centaur(a)mail.telbit.pt mailAlternateAddress: suporte.centaur(a)metropolis.telbit.pt mailMessageStore: /var/qmail/maildirs/suporte.centaur(a)telbit.pt dn: uid=notifier,ou=projectos,ou=accounts,dc=telbit,dc=pt objectClass: top objectClass: person objectClass: inetOrgPerson objectClass: qmailUser sn: Notifier cn: Centaur Notifier userPassword: {SHA}dwYnjQVTiPyY6o99NIXLJL1jblU= mail: notifier(a)telbit.pt uid: notifier mailAlternateAddress: notifier(a)mail.telbit.pt mailAlternateAddress: notifier(a)metropolis.telbit.pt mailMessageStore: /var/qmail/maildirs/notifier(a)telbit.pt dn: uid=centaur,ou=projectos,ou=accounts,dc=telbit,dc=pt objectClass: top objectClass: person objectClass: inetOrgPerson objectClass: qmailUser sn: Centaur cn: Centaur userPassword: {SHA}l3fvxkCk5L/J0SyuOea/SHBNaDU= mail: centaur(a)telbit.pt uid: centaur mailAlternateAddress: centaur(a)mail.telbit.pt mailAlternateAddress: centaur(a)metropolis.telbit.pt mailMessageStore: /var/qmail/maildirs/centaur(a)telbit.pt dn: ou=gestao,ou=accounts,dc=telbit,dc=pt objectClass: top objectClass: organizationalUnit ou: gestao description:: Q29udGFzIGRlIEVtYWlsIGFzc29jaWFkYXMgw6AgZ2VzdMOjbyBkYSBlbXByZXN h dn: uid=rh,ou=gestao,ou=accounts,dc=telbit,dc=pt objectClass: top objectClass: person objectClass: inetOrgPerson objectClass: qmailUser sn: Recursos Humanos cn: Recursos Humanos mail: rh(a)telbit.pt uid: rh mailMessageStore: /var/qmail/maildirs/rh(a)telbit.pt mailAlternateAddress: rh(a)mail.telbit.pt mailAlternateAddress: rh(a)metropolis.telbit.pt userPassword: {SSHA}QqK9/vItCbHm0FJahqyOKp9kI6s2l+m0 dn: uid=telbit,ou=gestao,ou=accounts,dc=telbit,dc=pt objectClass: top objectClass: person objectClass: inetOrgPerson objectClass: qmailUser objectClass: organizationalPerson sn:: VGVsYml0IC1UZWNub2xvZ2lhcyBkZSBJbmZvcm1hw6fDo28gTGRh cn:: VGVsYml0IC1UZWNub2xvZ2lhcyBkZSBJbmZvcm1hw6fDo28gTGRh telephoneNumber: 234 425 093 / ext-PTI: 1183 mail: telbit(a)telbit.pt uid: telbit mailAlternateAddress: telbit(a)mail.telbit.pt mailAlternateAddress: telbit(a)metropolis.telbit.pt mailMessageStore: /virtual/gestao/telbit(a)telbit.pt userPassword: {MD5}BVSB/EMPOZqByKUcMvX94A== dn: ou=users,ou=accounts,dc=telbit,dc=pt objectClass: top objectClass: organizationalUnit description: Contas de email dos colaboradores ou: users dn: uid=psaborano,ou=users,ou=accounts,dc=telbit,dc=pt objectClass: top objectClass: person objectClass: inetOrgPerson objectClass: qmailUser sn: Saborano cn: Pedro userPassword: {MD5}VjPIvwn2UqwSjFlzDXnIvw== telephoneNumber: ext-PTI: 1540 mail: psaborano(a)telbit.pt uid: psaborano mailAlternateAddress: psaborano(a)mail.telbit.pt mailAlternateAddress: psaborano(a)metropolis.telbit.pt mailQuotaSize: 1048576 mailMessageStore: /var/qmail/maildirs/psaborano(a)telbit.pt o: Telbit mobile: 96 134 27 28 departmentNumber: PTIN:CARE GORA dn: uid=spessoa,ou=users,ou=accounts,dc=telbit,dc=pt objectClass: top objectClass: person objectClass: inetOrgPerson objectClass: qmailUser mail: spessoa(a)telbit.pt uid: spessoa mailAlternateAddress: spessoa(a)mail.telbit.pt mailAlternateAddress: spessoa(a)metropolis.telbit.pt mailQuotaSize: 1048576 mailMessageStore: /var/qmail/maildirs/spessoa(a)telbit.pt o: Telbit userPassword: {MD5}W58yV6tqehUPIPfU8ihVmw== sn:: Pessoa cn:: Silvia departmentNumber: PTIN/ISS

2 2

RE: [CentOS] Help with XDMCP over SSH
by Plant, Dean 01 Mar '07

01 Mar '07

Les Mikesell wrote: > It should work, but NX is nicer in many situations. If you just want > to run a few applications and don't need the whole desktop you can > start cygwin xwin in -multiwindow mode, then start the apps you want > in your putty window using & to background them and get the prompt > back. Each app will open its own window on your desktop. A > variation on this theme is to drag the application launchers you need > from the gnome menu onto the desktop or in a folder on the desktop > and start nautilus from that first putty window. Clicking on the > launchers will start each app in its own window. Well after your advice I thought I better had take a look at FreeNX. 10 minutes later, all up and running and I agree, it is a lot nicer solution. In case anyone else is considering FreeNX, check out http://wiki.centos.org/FreeNX follow the write up and you will be up and running in 10 mins. Thanks Les and the author of the wiki page. Dean.

1 0

RE: [CentOS] Help with XDMCP over SSH
by Plant, Dean 01 Mar '07

01 Mar '07

Les Mikesell wrote: > Kanwar Ranbir Sandhu wrote: >> On Wed, 2007-02-28 at 14:55 +0000, Plant, Dean wrote: >>> I am trying to get XDMCP working over SSH on CentOS 4.4 from a >>> windoze box running Cygwin/Putty >> >> [snip] >> >>> Both commands will successfully display a X window and show the X >>> mouse pointer but not the chooser. Can anyone tell me what I am >>> doing wrong? >> >> Perhaps your ssh tunnel isn't configured properly. Let's see how >> you're setting up the tunnel. > > Or, as an alternative you might like freenx on the server and the > nomachine NX windows client. It gives better response over low > bandwidth or high latency connections and allows you to suspend a > session and reconnect later, perhaps from a different location. Thanks for your reply. I was hoping to use the software we already have installed (Putty&Cygwin) but if this fails I will look into your suggestion. Dean

2 1

ptyxx ports
by Ted Gervais 01 Mar '07

01 Mar '07

With the 2.6 kernels we have lost the ability to use ptyxx and ttyxx for the installation of various ports. I am thinking of attaching a modem etc to an axip or other similar port and for that I always used ptyxx/ttyxx to do this. How is this done with the 2.6 kernels? -- Ted Gervais 2381 Loretta Ave., Coldbrook Nova Scotia Canada b4r 1a7

1 0

RE: [CentOS] Help with XDMCP over SSH
by Plant, Dean 01 Mar '07

01 Mar '07

Kanwar Ranbir Sandhu wrote: > On Wed, 2007-02-28 at 14:55 +0000, Plant, Dean wrote: >> I am trying to get XDMCP working over SSH on CentOS 4.4 from a >> windoze box running Cygwin/Putty > > [snip] > >> Both commands will successfully display a X window and show the X >> mouse pointer but not the chooser. Can anyone tell me what I am >> doing wrong? > > Perhaps your ssh tunnel isn't configured properly. Let's see how > you're setting up the tunnel. > In sshd I have X11 Forwarding set # cat /etc/ssh/sshd_config | grep X11F X11Forwarding yes I have Putty configured with X11 forwarding >From Putty connection log: 2007-03-01 10:06:00 Access granted 2007-03-01 10:06:00 Opened channel for session 2007-03-01 10:06:00 Requesting X11 forwarding 2007-03-01 10:06:00 X11 forwarding enabled 2007-03-01 10:06:00 Allocated pty (ospeed 38400bps, ispeed 38400bps) 2007-03-01 10:06:00 Started a shell/command I have a Cygwin X server loaded and I can run an Xterm with no problems. I have used the System Settings control panel to enable XDMCP and UDP 177 is listening # netstat -l | grep xdmcp udp 0 0 *:xdmcp *:* I then log into the host machine and run: # Xnest :1 -query localhost Could not init font path element /usr/X11R6/lib/X11/fonts/TTF/, removing from list! Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list! After a while I get: XDM: too many retransmissions, declaring session dead Could not init font path element /usr/X11R6/lib/X11/fonts/TTF/, removing from list! Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list! And in the putty logs I see 2007-03-01 10:20:07 Received X11 connect request from 127.0.0.1:33368 2007-03-01 10:20:07 Opening X11 forward connection succeeded A Xwindow is displayed but all I see is a black background with the X mouse pointer. Thanks Dean

1 0

Openoffice.org quick launcher
by Jordi Espasa Clofent 01 Mar '07

01 Mar '07

Hi all, I know it's a dummy question, but ¿where is the gnome's quick launcher for OpenOffice.org suite? I search in several repos under their common name (ooqstart-gnome) without any result. ¿Where is it or what is the package's name? Thanks.

3 3

Kernel panic (2.4.21-47)
by Juha Heljoranta 01 Mar '07

01 Mar '07

Hi, We have a server which seems to panic once a while. I was wondering does the stack trace make any sense to you. The server usually runs a week or more and then crashes. Here is all what we had on the server screen when it crashed (hope I didn't make any typos): CPU: 0 EIP: 0060:[<c0168380>] Not tainted EFLAGS: 00010297 EIP: is at do_pollfd [kernel] 0x20 (2.4.-47.EL/i686) eax: 00000001 ebx: 00000000 ecx: 00000286 edx: f7e18600 esi: b8000070 edi: 00000000 ebp: 00000000 esp: d5dbff1c ds: 0068 es: 0068 ss: 0068 Process java (pid: 20490, stackpage=d5dbf000) Stack: c012c000 00000000 00000000 99c87d00 00000000 00000000 c01684ff 00000001 b8000070 d5dbff50 d5dbff54 d5dbe000 d5dbe000 00000000 00000000 00000001 99c87d00 00000000 00000001 c01686e7 00000001 00000000 00000001 f7e18600 Call Trace: [<c012c000>] process_timeout [kernel] 0x0 (0xd5dbff1c) [<c01684ff>] do_pollfd [kernel] 0x19f (0xd5dbff34) [<c01686e7>] sys_poll [kernel] 0x1d7 (0xd5dbff68) [<c01269ab>] sys_gettimeofday [kernel] 0x3b (0xd5dbff9c) [<c028406f>] no_timing [kernel] 0x7 (0xd5dbffc0) [<c028002b>] compress_block [kernel] 0x6b (0xd5dbffe0) Code 8b 06 31 db 85 c0 78 47 e8 03 e1 fe ff 85 c0 89 c7 bb 20 00 Kernel panic: Fatal exception

1 0

SMP on a HP DL-320 G2
by fredex 01 Mar '07

01 Mar '07

Hi gang! At work I have a DL320 G2 machine I use as my desktop (I know, weird!...). Back when I ran RHEL WS 2.1 on it, it always ran a SMP kernel because it has a HypterThread capable processor. When I installed (fresh from scratch) Centos 4.4 on it a while back, though, Centos installed only the UP kernel. I've looked in the BIOS for settings to enable/disable HT support and I don't see anything. I've force-installed the SMP kernel and when I boot it it doesn't seem to think there's anything thre but a normal UP CPU. Should it not show two CPUs in top, and in suitable places in /proc like the earlier OS did? (at least when running a SMP kernel) Ideas welcome. Thanks! -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- But God demonstrates his own love for us in this: While we were still sinners, Christ died for us. ------------------------------- Romans 5:8 (niv) ------------------------------

3 2

Help with XDMCP over SSH
by Plant, Dean 01 Mar '07

01 Mar '07

I am trying to get XDMCP working over SSH on CentOS 4.4 from a windoze box running Cygwin/Putty I have set Enable=true in /etc/X11/gdm/gdm.conf restarted the X server, logged in with Putty and X11 forwarding enabled. I then try to start the Xserver with the following commands # gdmXnestchooser localhost or # Xnest :1 -query localhost Both commands will successfully display a X window and show the X mouse pointer but not the chooser. Can anyone tell me what I am doing wrong? Thanks Dean

3 2

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss