- Discuss - lists.centos.org

Apache reverse proxy authentication problem on RHEL based distribs only
by Steve Johnson 05 Jan '06

05 Jan '06

Hi, I'm currently setting up an Apache SSL reverse proxy for Exchange 2003 Outlook Web Access. The setup that I have works fine on my Gentoo laptop or on a Trustix server, however, when I try to set it up on an RHEL based distro, with the exact same virtual host settings, I get some weird error with the authentication mechanism. I have tried with both CentOS 4.2, based off the server CD and Whitebox 4 and I get the same result. We did a network trace off the Exchange server, and noticed we noticed what is the problem, but can't figure out why only the configuration from those distros are causing it. When getting the HTTP authentication prompt from the Apache front-end, I enter "domain\user" for the user, but the Apache front-end only sends back part of the authentication string to the exchange. As an example, "domain\user" would only send back "d\u" to the Exchange server. This does not happen at all with the other distributions, as I get the full "domain\user" string sent back to the Exchange. Does anyone have any idea as to what could be causing this, and how I might go about fixing it? All our environment consists of the same distribution and I would prefer not to introduce a different one just for this purpose. Here is my virtual host configuration for this: ================================== <VirtualHost xxx.xxx.xxx.xxx:443> ServerName testproxy.domain.com SSLEngine On SSLCertificateFile /etc/httpd/conf/ssl.crt/server.crt SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server.key RequestHeader set Front-End-Https "On" ProxyRequests Off ProxyPreserveHost On LogLevel debug <Location /exchange> ProxyPass http://yyy.yyy.yyy.yyy/exchange ProxyPassReverse http://yyy.yyy.yyy.yyy/exchange SSLRequireSSL </Location> <Location /exchweb> ProxyPass http://yyy.yyy.yyy.yyy/exchweb ProxyPassReverse http://yyy.yyy.yyy.yyy/exchweb SSLRequireSSL </Location> <Location /public> ProxyPass http://yyy.yyy.yyy.yyy/public ProxyPassReverse http://yyy.yyy.yyy.yyy/public SSLRequireSSL </Location> </VirtualHost> ================================== Any information will be appreciated. Thanks, Steve Johnson

1 0

New logo for CentOS
by Jim Smith 05 Jan '06

05 Jan '06

To celebrate CentOS as the greatest thing since sliced bread, we should endevour to have a new logo in place. Whilst the current one suffices, a new logo/favicon should be in place. My artistry skills are not good (i was eating hotdogs whilst the rest of the class learned fine art), so those of you artistically endowed should come up with something. __________________________________________ Yahoo! DSL Something to write home about. Just $16.99/mo. or less. dsl.yahoo.com

4 3

adding groups and users below uid/gid 100
by Robert Hanson 05 Jan '06

05 Jan '06

greetings if i do this in a script on a basic mail and web server setup groupadd -g 55 nofiles useradd -g nofiles -d /var/qmail/alias -s /sbin/nologin -p'*' -u 56 alias useradd -g nofiles -d /var/qmail -s /sbin/nologin -p'*' -u 57 qmaild useradd -g nofiles -d /var/qmail -s /sbin/nologin -p'*' -u 58 qmaill useradd -g nofiles -d /var/qmail -s /sbin/nologin -p'*' -u 59 qmailp groupadd -g 60 qmail useradd -g qmail -d /var/qmail -s /sbin/nologin -p'*' -u 61 qmailq useradd -g qmail -d /var/qmail -s /sbin/nologin -p'*' -u 62 qmailr useradd -g qmail -d /var/qmail -s /sbin/nologin -p'*' -u 63 qmails groupadd -g 64 vchkpw useradd -g vchkpw -d /home/vpopmail -s /sbin/nologin -p'*' -u 65 vpopmail will i cause any problems with DEFAULT upstream provider package addons that might use in the future that want to install with the same UID or GID numbers??? again, by default? it seems that between 55 and 70 is the small block of contiguous uid/gid space in general thanks and kind regards - rh -- Robert Hanson - Abba Communications Computer & Internet Services (509) 624-7159 - www.abbacomm.net

1 0

How to play emebed media files(online movies and music) in centos?
by lnthai2002＠aim.com 05 Jan '06

05 Jan '06

Hi, Does anyone know which package i should install in order to play online movies and music (trailer video)? My friend told me that kaffeine does a good job but after installing it , firefox still complains that no plugin available to display media file. Any suggestion are welcome. THAI ________________________________________________________________________ Check Out the new free AIM(R) Mail -- 2 GB of storage and industry-leading spam and email virus protection.

11 20

Apache issue
by William Warren 05 Jan '06

05 Jan '06

I know it is a configuration error. But i cannot figure it out. The server was working fine until a couple of days ago. it is now throwing: Forbidden You don't have permission to access / on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request. Apache/2.0.52 (CentOS) Server at BabyHydra.localdomain Port 80 Nothing has changed that i can see. Can anyone give me a place to look for the problem? Here's my httpd.conf: # # Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "logs/foo.log" # with ServerRoot set to "/etc/httpd" will be interpreted by the # server as "/etc/httpd/logs/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # Don't give away too much information about all the subcomponents # we are running. Comment out this line if you don't mind remote sites # finding out what major optional modules you are running ServerTokens OS # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation # (available at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # ServerRoot "/etc/httpd" # # PidFile: The file in which the server should record its process # identification number when it starts. # PidFile run/httpd.pid # # Timeout: The number of seconds before receives and sends time out. # TimeOut 120 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive on # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 500 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # ServerLimit: maximum value for MaxClients for the lifetime of the server # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule prefork.c> MinSpareServers 1 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 4000 </IfModule> # worker MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule worker.c> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, in addition to the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses (0.0.0.0) # #Listen 12.34.56.78:80 Listen *:80 Listen *:21 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule access_module modules/mod_access.so LoadModule auth_module modules/mod_auth.so LoadModule auth_anon_module modules/mod_auth_anon.so LoadModule auth_dbm_module modules/mod_auth_dbm.so LoadModule auth_digest_module modules/mod_auth_digest.so LoadModule ldap_module modules/mod_ldap.so LoadModule auth_ldap_module modules/mod_auth_ldap.so LoadModule include_module modules/mod_include.so LoadModule log_config_module modules/mod_log_config.so LoadModule env_module modules/mod_env.so LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule cern_meta_module modules/mod_cern_meta.so LoadModule expires_module modules/mod_expires.so LoadModule deflate_module modules/mod_deflate.so LoadModule headers_module modules/mod_headers.so LoadModule usertrack_module modules/mod_usertrack.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule mime_module modules/mod_mime.so LoadModule dav_module modules/mod_dav.so LoadModule status_module modules/mod_status.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule asis_module modules/mod_asis.so LoadModule info_module modules/mod_info.so LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule imap_module modules/mod_imap.so LoadModule actions_module modules/mod_actions.so LoadModule speling_module modules/mod_speling.so LoadModule userdir_module modules/mod_userdir.so LoadModule alias_module modules/mod_alias.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule proxy_connect_module modules/mod_proxy_connect.so LoadModule cache_module modules/mod_cache.so LoadModule suexec_module modules/mod_suexec.so LoadModule disk_cache_module modules/mod_disk_cache.so LoadModule file_cache_module modules/mod_file_cache.so LoadModule mem_cache_module modules/mod_mem_cache.so LoadModule cgi_module modules/mod_cgi.so # # Load config files from the config directory "/etc/httpd/conf.d". # Include conf.d/*.conf # # ExtendedStatus controls whether Apache will generate "full" status # information (ExtendedStatus On) or just basic information (ExtendedStatus # Off) when the "server-status" handler is called. The default is Off. # #ExtendedStatus On ### Section 2: 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # . On SCO (ODT 3) use "User nouser" and "Group nogroup". # . On HPUX you may not be able to use shared memory as nobody, and the # suggested workaround is to create a user www and use that user. # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET) # when the value of (unsigned)Group is above 60000; # don't use Group #-1 on these systems! # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. admin(a)your-domain.com # ServerAdmin root@localhost # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If this is not set to valid DNS name for your host, server-generated # redirections will not work. See also the UseCanonicalName directive. # # If your host doesn't have a registered DNS name, enter its IP address here. # You will have to access it by its address anyway, and this will make # redirections work in a sensible way. # #ServerName new.host.name:80 # # UseCanonicalName: Determines how Apache constructs self-referencing # URLs and the SERVER_NAME and SERVER_PORT variables. # When set "Off", Apache will use the Hostname and Port supplied # by the client. When set "On", Apache will use the value of the # ServerName directive. # # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot /home/www # # Each directory to which Apache has access can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # features. # # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. # <Directory "/home/www"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs-2.0/mod/core.html#options # for more information. # Options Indexes FollowSymLinks # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride None # # Controls who can get stuff from this server. # Order allow,deny Allow from all </Directory> # # UserDir: The name of the directory that is appended onto a user's home # directory if a ~user request is received. # # The path to the end user account 'public_html' directory must be # accessible to the webserver userid. This usually means that ~userid # must have permissions of 711, ~userid/public_html must have permissions # of 755, and documents contained therein must be world-readable. # Otherwise, the client will only receive a "403 Forbidden" message. # # See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden # <IfModule mod_userdir.c> # # UserDir is disabled by default since it can confirm the presence # of a username on the system (depending on home directory # permissions). # # # To enable requests to /~user/ to serve the user's public_html # directory, remove the "UserDir disable" line above, and uncomment # the following line instead: # #UserDir public_html </IfModule> # # Control access to UserDir directories. The following is an example # for a site where these directories are restricted to read-only. # #<Directory /home/*/public_html> # AllowOverride FileInfo AuthConfig Limit # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec # <Limit GET POST OPTIONS> # Order allow,deny # Allow from all # </Limit> # <LimitExcept GET POST OPTIONS> # Order deny,allow # Deny from all # </LimitExcept> #</Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # # The index.html.var file (a type-map) is used to deliver content- # negotiated documents. The MultiViews Option can be used for the # same purpose, but it is much slower. # DirectoryIndex index.html index.html.var # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> # # TypesConfig describes where the mime.types file (or equivalent) is # to be found. # TypesConfig /etc/mime.types # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # <IfModule mod_mime_magic.c> # MIMEMagicFile /usr/share/magic.mime MIMEMagicFile conf/magic </IfModule> # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # # # EnableMMAP: Control whether memory-mapping is used to deliver # files (assuming that the underlying OS supports it). # The default is on; turn this off if you serve from NFS-mounted # filesystems. On some systems, turning it off (regardless of # filesystem) can improve performance; for details, please see # http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap # #EnableMMAP off # # EnableSendfile: Control whether the sendfile kernel support is # used to deliver files (assuming that the OS supports it). # The default is on; turn this off if you serve from NFS-mounted # filesystems. Please see # http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile # #EnableSendfile off # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog logs/error_log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # #CustomLog logs/access_log common # # If you would like to have agent and referer logfiles, uncomment the # following directives. # #CustomLog logs/referer_log referer #CustomLog logs/agent_log agent # # For a single logfile with access, agent, and referer information # (Combined Logfile Format), use the following directive: # CustomLog logs/access_log combined # # Optionally add a line containing the server version and virtual host # name to server-generated pages (internal error documents, FTP directory # listings, mod_status and mod_info output etc., but not CGI generated # documents or custom error documents). # Set to "EMail" to also include a mailto: link to the ServerAdmin. # Set to one of: On | Off | EMail # ServerSignature On # # Aliases: Add here as many aliases as you need (with no limit). The format is # Alias fakename realname # # Note that if you include a trailing / on fakename then the server will # require it to be present in the URL. So "/icons" isn't aliased in this # example, only "/icons/". If the fakename is slash-terminated, then the # realname must also be slash terminated, and if the fakename omits the # trailing slash, the realname must also omit it. # # We include the /icons/ alias for FancyIndexed directory listings. If you # do not use FancyIndexing, you may comment this out. # Alias /icons/ /user/www/icons/ <Directory "/var/www/icons"> Options Indexes MultiViews AllowOverride None Order allow,deny Allow from all </Directory> # # WebDAV module configuration section. # <IfModule mod_dav_fs.c> # Location of the WebDAV lock database. DAVLockDB /var/lib/dav/lockdb </IfModule> # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the realname directory are treated as applications and # run by the server when requested rather than as documents sent to the client. # The same rules about trailing "/" apply to ScriptAlias directives as to # Alias. # ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" # # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/var/www/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> # # Redirect allows you to tell clients about documents which used to exist in # your server's namespace, but do not anymore. This allows you to tell the # clients where to look for the relocated document. # Example: # Redirect permanent /foo http://www.example.com/bar # # Directives controlling the display of server-generated directory listings. # # # IndexOptions: Controls the appearance of server-generated directory # listings. # IndexOptions FancyIndexing VersionSort NameWidth=* # # AddIcon* directives tell the server which icon to show for different # files or filename extensions. These are only displayed for # FancyIndexed directories. # AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip AddIconByType (TXT,/icons/text.gif) text/* AddIconByType (IMG,/icons/image2.gif) image/* AddIconByType (SND,/icons/sound2.gif) audio/* AddIconByType (VID,/icons/movie.gif) video/* AddIcon /icons/binary.gif .bin .exe AddIcon /icons/binhex.gif .hqx AddIcon /icons/tar.gif .tar AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip AddIcon /icons/a.gif .ps .ai .eps AddIcon /icons/layout.gif .html .shtml .htm .pdf AddIcon /icons/text.gif .txt AddIcon /icons/c.gif .c AddIcon /icons/p.gif .pl .py AddIcon /icons/f.gif .for AddIcon /icons/dvi.gif .dvi AddIcon /icons/uuencoded.gif .uu AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl AddIcon /icons/tex.gif .tex AddIcon /icons/bomb.gif core AddIcon /icons/back.gif .. AddIcon /icons/hand.right.gif README AddIcon /icons/folder.gif ^^DIRECTORY^^ AddIcon /icons/blank.gif ^^BLANKICON^^ # # DefaultIcon is which icon to show for files which do not have an icon # explicitly set. # DefaultIcon /icons/unknown.gif # # AddDescription allows you to place a short description after a file in # server-generated indexes. These are only displayed for FancyIndexed # directories. # Format: AddDescription "description" filename # #AddDescription "GZIP compressed document" .gz #AddDescription "tar archive" .tar #AddDescription "GZIP compressed tar archive" .tgz # # ReadmeName is the name of the README file the server will look for by # default, and append to directory listings. # # HeaderName is the name of a file which should be prepended to # directory indexes. ReadmeName README.html HeaderName HEADER.html # # IndexIgnore is a set of filenames which directory indexing should ignore # and not include in the listing. Shell-style wildcarding is permitted. # IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t # # DefaultLanguage and AddLanguage allows you to specify the language of # a document. You can then use content negotiation to give a browser a # file in a language the user can understand. # # Specify a default language. This means that all data # going out without a specific language tag (see below) will # be marked with this one. You probably do NOT want to set # this unless you are sure it is correct for all cases. # # * It is generally better to not mark a page as # * being a certain language than marking it with the wrong # * language! # # DefaultLanguage nl # # Note 1: The suffix does not have to be the same as the language # keyword --- those with documents in Polish (whose net-standard # language code is pl) may wish to use "AddLanguage pl .po" to # avoid the ambiguity with the common suffix for perl scripts. # # Note 2: The example entries below illustrate that in some cases # the two character 'Language' abbreviation is not identical to # the two character 'Country' code for its country, # E.g. 'Danmark/dk' versus 'Danish/da'. # # Note 3: In the case of 'ltz' we violate the RFC by using a three char # specifier. There is 'work in progress' to fix this and get # the reference data for rfc1766 cleaned up. # # Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl) # English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de) # Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja) # Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn) # Norwegian (no) - Polish (pl) - Portugese (pt) # Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv) # Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW) # AddLanguage ca .ca AddLanguage cs .cz .cs AddLanguage da .dk AddLanguage de .de AddLanguage el .el AddLanguage en .en AddLanguage eo .eo AddLanguage es .es AddLanguage et .et AddLanguage fr .fr AddLanguage he .he AddLanguage hr .hr AddLanguage it .it AddLanguage ja .ja AddLanguage ko .ko AddLanguage ltz .ltz AddLanguage nl .nl AddLanguage nn .nn AddLanguage no .no AddLanguage pl .po AddLanguage pt .pt AddLanguage pt-BR .pt-br AddLanguage ru .ru AddLanguage sv .sv AddLanguage zh-CN .zh-cn AddLanguage zh-TW .zh-tw # # LanguagePriority allows you to give precedence to some languages # in case of a tie during content negotiation. # # Just list the languages in decreasing order of preference. We have # more or less alphabetized them here. You probably want to change this. # LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW # # ForceLanguagePriority allows you to serve a result page rather than # MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback) # [in case no accepted languages matched the available variants] # ForceLanguagePriority Prefer Fallback # # Specify a default charset for all pages sent out. This is # always a good idea and opens the door for future internationalisation # of your web site, should you ever want it. Specifying it as # a default does little harm; as the standard dictates that a page # is in iso-8859-1 (latin1) unless specified otherwise i.e. you # are merely stating the obvious. There are also some security # reasons in browsers, related to javascript and URL parsing # which encourage you to always set a default char set. # AddDefaultCharset UTF-8 # # Commonly used filename extensions to character sets. You probably # want to avoid clashes with the language extensions, unless you # are good at carefully testing your setup after each change. # See http://www.iana.org/assignments/character-sets for the # official list of charset names and their respective RFCs. # AddCharset ISO-8859-1 .iso8859-1 .latin1 AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen AddCharset ISO-8859-3 .iso8859-3 .latin3 AddCharset ISO-8859-4 .iso8859-4 .latin4 AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk AddCharset ISO-2022-JP .iso2022-jp .jis AddCharset ISO-2022-KR .iso2022-kr .kis AddCharset ISO-2022-CN .iso2022-cn .cis AddCharset Big5 .Big5 .big5 # For russian, more than one charset is used (depends on client, mostly): AddCharset WINDOWS-1251 .cp-1251 .win-1251 AddCharset CP866 .cp866 AddCharset KOI8-r .koi8-r .koi8-ru AddCharset KOI8-ru .koi8-uk .ua AddCharset ISO-10646-UCS-2 .ucs2 AddCharset ISO-10646-UCS-4 .ucs4 AddCharset UTF-8 .utf8 # The set below does not map to a specific (iso) standard # but works on a fairly wide range of browsers. Note that # capitalization actually matters (it should not, but it # does for some browsers). # # See http://www.iana.org/assignments/character-sets # for a list of sorts. But browsers support few. # AddCharset GB2312 .gb2312 .gb AddCharset utf-7 .utf7 AddCharset utf-8 .utf8 AddCharset big5 .big5 .b5 AddCharset EUC-TW .euc-tw AddCharset EUC-JP .euc-jp AddCharset EUC-KR .euc-kr AddCharset shift_jis .sjis # # AddType allows you to add to or override the MIME configuration # file mime.types for specific file types. # #AddType application/x-tar .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # Despite the name similarity, the following Add* directives have nothing # to do with the FancyIndexing customization directives above. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # # For files that include their own HTTP headers: # #AddHandler send-as-is asis # # For server-parsed imagemap files: # AddHandler imap-file map # # For type maps (negotiated resources): # (This is enabled by default to allow the Apache "It Worked" page # to be distributed in multiple languages.) # AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # AddType text/html .shtml AddOutputFilter INCLUDES .shtml # # Action lets you define media types that will execute a script whenever # a matching file is called. This eliminates the need for repeated URL # pathnames for oft-used CGI file processors. # Format: Action media/type /cgi-script/location # Format: Action handler-name /cgi-script/location # # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # Putting this all together, we can internationalize error responses. # # We use Alias to redirect any /error/HTTP_<error>.html.var response to # our collection of by-error message multi-language collections. We use # includes to substitute the appropriate text. # # You can modify the messages' appearance without changing any of the # default HTTP_<error>.html.var files by adding the line: # # Alias /error/include/ "/your/include/path/" # # which allows you to create your own set of files by starting with the # /var/www/error/include/ files and # copying them to /your/include/path/, even on a per-VirtualHost basis. # Alias /error/ /user/www/error/ <IfModule mod_negotiation.c> <IfModule mod_include.c> <Directory "/var/www/error"> AllowOverride None Options IncludesNoExec AddOutputFilter Includes html AddHandler type-map var Order allow,deny Allow from all LanguagePriority en es de fr ForceLanguagePriority Prefer Fallback </Directory> # ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var # ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var # ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var # ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var # ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var # ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var # ErrorDocument 410 /error/HTTP_GONE.html.var # ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var # ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var # ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var # ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var # ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var # ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var # ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var # ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var # ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var # ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var </IfModule> </IfModule> # # The following directives modify normal HTTP response behavior to # handle known problems with browser implementations. # BrowserMatch "Mozilla/2" nokeepalive BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 BrowserMatch "RealPlayer 4\.0" force-response-1.0 BrowserMatch "Java/1\.0" force-response-1.0 BrowserMatch "JDK/1\.0" force-response-1.0 # # The following directive disables redirects on non-GET requests for # a directory that does not include the trailing slash. This fixes a # problem with Microsoft WebFolders which does not appropriately handle # redirects for folders with DAV methods. # Same deal with Apple's DAV filesystem and Gnome VFS support for DAV. # BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully BrowserMatch "^WebDrive" redirect-carefully BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully BrowserMatch "^gnome-vfs" redirect-carefully ServerPath /home/www User www Group users UserDir "/home/www" # # Allow server status reports generated by mod_status, # with the URL of http://servername/server-status # Change the ".example.com" to match your domain to enable. # #<Location /server-status> # SetHandler server-status # Order deny,allow # Deny from all # Allow from .example.com #</Location> # # Allow remote server configuration reports, with the URL of # http://servername/server-info (requires that mod_info.c be loaded). # Change the ".example.com" to match your domain to enable. # #<Location /server-info> # SetHandler server-info # Order deny,allow # Deny from all # Allow from .example.com #</Location> # # Proxy Server directives. Uncomment the following lines to # enable the proxy server: # #<IfModule mod_proxy.c> #ProxyRequests On # #<Proxy *> # Order deny,allow # Deny from all # Allow from .example.com #</Proxy> # # Enable/disable the handling of HTTP/1.1 "Via:" headers. # ("Full" adds the server version; "Block" removes all outgoing Via: headers) # Set to one of: Off | On | Full | Block # #ProxyVia On # # To enable a cache of proxied content, uncomment the following lines. # See http://httpd.apache.org/docs-2.0/mod/mod_cache.html for more details. # #<IfModule mod_disk_cache.c> # CacheEnable disk / # CacheRoot "/var/cache/mod_proxy" #</IfModule> # #</IfModule> # End of proxy directives. ### Section 3: Virtual Hosts # # VirtualHost: If you want to maintain multiple domains/hostnames on your # machine you can setup VirtualHost containers for them. Most configurations # use only name-based virtual hosts so the server doesn't need to worry about # IP addresses. This is indicated by the asterisks in the directives below. # # Please see the documentation at # <URL:http://httpd.apache.org/docs-2.0/vhosts/> # for further details before you try to setup virtual hosts. # # You may use the command line option '-S' to verify your virtual host # configuration. # # Use name-based virtual hosting. # #NameVirtualHost *:80 # # NOTE: NameVirtualHost cannot be used without a port specifier # (e.g. :80) if mod_ssl is being used, due to the nature of the # SSL protocol. # # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for requests without a known # server name. # #<VirtualHost *:80> # ServerAdmin webmaster(a)dummy-host.example.com # DocumentRoot /www/docs/dummy-host.example.com # ServerName dummy-host.example.com # ErrorLog logs/dummy-host.example.com-error_log # CustomLog logs/dummy-host.example.com-access_log common #</VirtualHost> -- My "Foundation" verse: Isa 54:17 No weapon that is formed against thee shall prosper; and every tongue that shall rise against thee in judgment thou shalt condemn. This is the heritage of the servants of the LORD, and their righteousness is of me, saith the LORD. -- carpe ductum -- "Grab the tape" CDTT (Certified Duct Tape Technician) Linux user #322099 Machines: 206822 256638 276825 http://counter.li.org/

3 3

Build Instructions, utils, used by CentOS team
by dan.trainor 05 Jan '06

05 Jan '06

Hello - A few months back, I had a bunch of questions regarding hacking up a centOS install, even going as far as editing comps, adding my own packages as part od @base and @core install groups, etc etc. It was quite an adventure. However, I haven't don it in a while, so naturally, I forgot a lot about it. I'm trying to remember who it was that had forwarded me docs and scripts used by the CentOS build team, including procedures and the like, which would help me out with this. This information would be an incredible help to me, and I would very very much appreciate it if I could get my hands on this. Thanks for your time -dant

1 0

selinux "strict" policy for Centos-4
by Jesse 04 Jan '06

04 Jan '06

Is anyone using the "strict" policy with Centos-4? If so which RPM are you using and where did you get it? I have searched a little and haven't been able to find it. Redhat site states that it's "not supported, but will be availble for download" I didn't see it in any of the extra/addon repos either. Thanks, --jesse

2 2

RE: [CentOS] telnet to serial connection?
by Young, Darren 04 Jan '06

04 Jan '06

> so, it seems that what i need is a telnet server running on > my CentOS > box that, instead of calling /bin/login when someone connects, > instead starts up a serial session (i'd prefer something more > transparent than minicom, if possible). anyone have any good ideas > on how to do this? i had been thinking of creating a user for this > purpose whose shell was /usr/bin/minicom, but i'm open to other > suggestions. Assuming the network you're on is at least sort of secure, what about a netcat listener connected to /bin/cu ? If you wanted authentication on it as well, perhaps a small C program that netcat is connected to can do the authentication then spawn /bin/cu. As in: nc -l -p 23 -t -e /bin/cu -l <line> -s <speed> Just noticed my RHEL3 box doesn't have cu installed, but I'm betting it'd be in a uucp package somewhere. Change the port, change the line, speed, etc to match whatever you have running. Could always place netcat behind inetd and tcp_wrappers to secure down the inbound to a certain ip/subnet. Also, it looks like GNU Netcat actually has the ability to specify the source that's allowed.

1 0

telnet to serial connection?
by Steve Huff 04 Jan '06

04 Jan '06

hello folks! here's my situation: i've got two WTI RPB+ remote power switches (essentially a 5-port power strip which you can control via serial interface to make each of the ports switch on and off independently). they work fine; i plug a DB-9 cable into the back of my machine, fire up minicom, and i have full control. however, my eventual plan is to use these as fencing devices for a small RHCS cluster i'm building, and so the fencing process will need to be scriptable. RHCS wants to fence by invoking a "/sbin/ fence_<whatever>" script that uses Net::Telnet to connect to the fencing device and then enters the commands. so, it seems that what i need is a telnet server running on my CentOS box that, instead of calling /bin/login when someone connects, instead starts up a serial session (i'd prefer something more transparent than minicom, if possible). anyone have any good ideas on how to do this? i had been thinking of creating a user for this purpose whose shell was /usr/bin/minicom, but i'm open to other suggestions. thanks, steve --- If this were played upon a stage now, I could condemn it as an improbable fiction. - Fabian, Twelfth Night, III,v

2 1

Opteron, Athlon/64, and disaster recovery
by Benjamin Smith 04 Jan '06

04 Jan '06

Has anybody here taken a HDD configured with an Opteron system, and then put it into an Athlon/64 and had it work? Are they interchangeable, like an Athlon/32 and a P3/P4? -Ben -- "The best way to predict the future is to invent it." - XEROX PARC slogan, circa 1978

4 16

crm solution
by Kai Sandsengen 04 Jan '06

04 Jan '06

I am searching for a crm solution for small business and private use. Can't find anything within the CentOS 4.2. Most important for me are: address book, comments and document organization. Any comments or recommendations appreciated. kai

7 10

openssh port forward in centos 4
by Erick Perez 04 Jan '06

04 Jan '06

Hi, I use putty in my windows xp machine. ssh server in a centos 4. The centos 4 machine runs a web server that listens on port 1812, the centos machine is behind a firewall that allows tcp 22 connections only. I am on public internet. Can I forward/redirect/allow my web browser in windows to "see" the web page in port 1812 of the centos machine via the SSH connection? Thanks, -- ------------------------------------------- Erick Perez Linux User 376588 http://counter.li.org/ (Get counted!!!) Panama, Republic of Panama

5 5

CentOS 64 on AMD 64 4600x2
by Brandon 04 Jan '06

04 Jan '06

Hello you brilliant minds, I am in need of some (probably basic) information concerning CentOS and the new dual core 64 bit systems. I realize that Linux was inherently built for multiple processor systems, as well as 64 bit systems. My first question is AMD doing anything special with doing all of the above on one chip that I need to know about before installing CentOS on my newest system? Also, my motherboard being a a8n32-sli has SATA II and RAID capabilities. Is there anything special about the SATA II that I need to set up to use the full capabilities of this hardware and CentOS. Any information would be better than what I have at the moment. Many thanks in advance. Brandon

3 2

Re: [CentOS] x86 -64 sys...powernow-k8???
by David Thompson 04 Jan '06

04 Jan '06

"Bryan J. Smith" wrote: >More errata fixed in software, oh joy! > >Isn't there a way to just disable "PowerNow!"/"Cool'n Quiet" >altogether in the meantime? Disabling the 'cpuspeed' init will keep the system from adjusting the CPU speed. Dave Thompson UW-Madison

1 0

network running at 10 or 100, how to tell
by Jerry Geis 04 Jan '06

04 Jan '06

How do you tell if your network card is running at 10 or 100 Meg? THanks, Jerry

7 8

modem for dial IN
by Tom Brown 04 Jan '06

04 Jan '06

Hi Not entirely centos related but that what the boxes are running so here i go ;) 2 of our centos boxes run nagios for network monitoring and send email and paging alerts and are connected to standard phone lines using modems to send the pages. I'm looking for a way in the event of provider failure to login to these machines and so am looking at the ability to connect to the console over the modem. Any good how-to's on this ? Also interested to know real life seciruty risks etc. Is it possible to limit phone numbers that are abor to connect etc? thanks

4 3

JAVA Issue - JDK 1.4 - Cent OS 4.2
by Tom Brown 04 Jan '06

04 Jan '06

Hi Trying to run up a JVM on a box thats running 4.2 - The JDK version is j2sdk1.4.2_03 and the exact error is below Unable to load native library: /opt/j2sdk1.4.0/jre/lib/i386/libjava.so: symbol __libc_waitpid, version GLIBC_2.0 not defined in file libc.so.6 with link time reference any ideas thanks

2 2

OT: [CentOS] Linux boot floppy to install over net
by Bassett, Mark 04 Jan '06

04 Jan '06

>Robert Moskowitz <rgm(a)htt-consult.com> wrote: >And the sole purpose of this system is to be a wireless sniffer/attacker. Have you looked into livecd distributions? I find that those work rather well for that type of use. PHLAK / Knoppix STD / Helix ?? You can always perform a HD install on any of them.

1 0

Jigdo, etc...
by Maciej Żenczykowski 04 Jan '06

04 Jan '06

Hi folks, I've just finished rsyncing/downloading/jigdoizing the entire i386/x86_64 CentOS 4.2 distribution. If anyone is interested go to http://mirror.tcs.ii.uj.edu.pl/jigdo/ You'll need to edit the .jigdo file by hand to change the server section [Servers] CentOS42=file:/opt/mirrors/centos/4.2/ to point to a local mirror (file, http or ftp), ie. to use kernel.org: [Servers] CentOS42=http://mirrors.kernel.org/centos/4.2/ While doing this I have come upon a few questions: a) it seems the server cd's have a lot of stuff not present in the normal directory mirror, I guess this is an artifact of the build process? [the template files for the servercd's are ~120MB] b) what are the .newheaders and .repodata directories on i386 CD1? c) why do the mirror repodata/*.xml.gz files not match neither the CD nor DVD versions for i386? d) why does the i386 DVD not match ideally, but the x86_64 DVD matches for _all_ files. The x86_64 CD1 also matches _much_ better than the i386 CD1... e) why aren't identical files between the two trees hardlinked? $ ls -ali os/*/CentOS/RPMS/yum*noarch* 278532 -rw-rw-r-- 1 maze maze 395922 Sep 4 19:48 i386/CentOS/RPMS/yum-2.4.0-1.centos4.noarch.rpm 1165388 -rw-rw-r-- 1 maze maze 395922 Oct 10 22:20 x86_64/CentOS/RPMS/yum-2.4.0-1.centos4.noarch.rpm $ md5sum os/*/CentOS/RPMS/yum*noarch* 371d55a19f8e4ca13d22974128ab4671 i386/CentOS/RPMS/yum-2.4.0-1.centos4.noarch.rpm 371d55a19f8e4ca13d22974128ab4671 x86_64/CentOS/RPMS/yum-2.4.0-1.centos4.noarch.rpm Just an example of two identical files from my mirror, one of which is wasting space even though contents are identical. I expect we have this situation for almost _all_ i386 packages from the x86_64 distribution... $ pwd /opt/mirrors/centos/4.2/os/x86_64 $ find|grep "i386\.rpm"|while read i;do diff -qr "$i" "../i386/$i";done $ find|grep "i386\.rpm"|while read i;do cat "$i";done|wc -c 440745010 $ find|grep "noarch\.rpm"|while read i;do diff -qr "$i" "../i386/$i";done $ find|grep "noarch\.rpm"|while read i;do cat "$i";done|wc -c 426816227 $ pwd /opt/mirrors/centos/4.2/updates/x86_64 $ find|grep "i386\.rpm"|while read i;do diff -qr "$i" "../i386/$i";done $ find|grep "i386\.rpm"|while read i;do cat "$i";done|wc -c 12819616 $ find|grep "noarch\.rpm"|while read i;do diff -qr "$i" "../i386/$i";done diff: ../i386/./RPMS/createrepo-0.4.3-1.noarch.rpm: No such file or directory $ find|grep "noarch\.rpm"|while read i;do cat "$i";done|wc -c 2164495 $ ls RPMS/createrepo-0.4.3-1.noarch.rpm -al -rw-rw-r-- 2 maze maze 18284 Sep 5 13:59 RPMS/createrepo-0.4.3-1.noarch.rpm That seems to me to be a 880 MB mirror space savings to be made there... Considering the i386/x86_64 mirror takes up 7.7GB (without iso's) that's quite a bit... I also imagine the noarch files are shared with most of the other architectures... so I'd assume another 400MB per every next arch can be saved... f) Why aren't jigdo files available on the site? They'd really come in useful, especially in the situation I had where I already had a complete mirror of all the files, but I still had to bittorrent the CD/DVD's even though I had 99% of the required data on disk! Cheers, MaZe.

2 3

megaide support for 4.2
by Kris Buytaert 04 Jan '06

04 Jan '06

In 2.4 there used to be a megaide driver for certain ata raid controllers. In 2.6 I can't access more than my /dev/hda , I can see my other 4, I can create filesystems on them, but I can't mount them Anyone knows how to use these on a 2.6 kernel (Centos 4.2) greetings Kris 00:02.0 RAID bus controller: Silicon Image, Inc. SiI 0649 Ultra ATA/100 PCI to ATA Host Controller (rev 02) Subsystem: Compaq Computer Corporation Integrated Ultra ATA-100 IDE RAID Controller Flags: bus master, medium devsel, latency 64, IRQ 5 I/O ports at 2010 [size=8] I/O ports at 2018 [size=4] I/O ports at 2020 [size=8] I/O ports at 2028 [size=4] I/O ports at 2030 [size=16] Capabilities: [60] Power Management version 2 -- Kris Buytaert <mlkb(a)x-tend.be>

7 15

How to upgrade hard drive in a single drive (with LVM2) computer
by Barry L. Kline 04 Jan '06

04 Jan '06

This one has me stumped and I'm sure I must be missing something trivial. What is is eludes me. I have a 20G drive that will be replaced with a 160G drive. The /boot partition is just a standard type 83, and the swap is an 82. The system root partition is in a LV, as is the /home partition. I've upgraded hard drives dozens of times without incident, but never ona system with LVM. I did this (booted into single-user mode): 1) Create the appropriate partitions on the new drive 2) Created an EXT3 partition and copies over /boot, ran GRUB to make it bootable. 3) did the mkswap on the second partition. 4) did a pvcreate on the third partition on the new drive, then created th VG (vg1) and LV for the two paritions. 5) Mounted the new partitions under /mnt, then used tar to copy the files from the old to the new (excluding tmp mnt sys & proc) 6) Edited grub.conf (on the new drive) to point to VG1 instead of VG0 for sysroot. Edited /mnt/etc/fstab to point to the new locations (I changed the names of the logical volumes slightly.) 6) Disconnected the old drive, then booted. The system booted, but got only as far as 'Red Hat nash' ... then complained that it couldn't find vg0. (the volume group on the other disk). I can't get into single-user mode when booting this single drive. I'm trying to do this whole thing non-destructively so that the original drive is a backup, until we confirm that the new drive is behaving well. Are these steps correct (and they should be without LVM) or is there something much easier and obvious that I'm missing? I could, I suppose, add the new parition into the original volume group, and do the 'pvmove' dance to get things over (as explained briefly in the LVM-HOWTO on Red Hat's site) but it wouldn't leave a bootable system on the original drive. Any suggestions would be greatly appreciated! TIA, Barry

2 8

Yumex, yum-utils
by Jim Smith 04 Jan '06

04 Jan '06

I saw the link someone posted to SL (Scientific Linux) yumex rpm's. I grabbed the SRPMS, changed some references from SL to CentOS in the spec files and rebuilt the RPMS. I managed to get yumex up and running by manually configuring yumex.conf. What is the use of the yum-utils and the dozen or so utilities? Are there any docs? (Bearing in mind my hack may have damaged the SL installation) CentOS should have its own yumex/yum-utils considering the likes of Scientific Linux and Lineox have had them for a long time. __________________________________________ Yahoo! DSL Something to write home about. Just $16.99/mo. or less. dsl.yahoo.com

5 6

slow GUI
by Robert Moskowitz 04 Jan '06

04 Jan '06

System: PIII 500Mhz 128MB memory 20GB drive Current CentOS 4.2 Gnome GUI The system runs 'idle' at around 70Mb memory used and 4% cpu usage. But whenever I go to start a task: Start Gedit, Services tool, a Terminal window, Firefox It takes a minute or so. CPU mayyyypeak at 100% briefly then come down. Memory has yet to exceed 100Mb usage. Any pointers of where to look to see why it is slow?

10 17

Large partition problem
by HaraldFinnås 04 Jan '06

04 Jan '06

I really hope someone has a clue on this one.... :) I've got a 2.2TB array mounted on a 3ware 9500 controller. I installed it last week ensuring that LBA was enabled and using gpt with parted to get the full size available on one array. I also think I chose reiserfs for the array. We then moved ALOT of data to the array. Problem now is that after a reboot LBA doesn't seem to be in effect. From dmesg: sdc : very big device. try to use READ CAPACITY(16). SCSI device sdc: 4374845440 512-byte hdwr sectors (2239921 MB) SCSI device sdc: drive cache: none sdc : very big device. try to use READ CAPACITY(16). SCSI device sdc: 4374845440 512-byte hdwr sectors (2239921 MB) SCSI device sdc: drive cache: none sdc: sdc1 Attached scsi disk sdc at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Attached scsi generic sg1 at scsi0, channel 0, id 7, lun 0, type 0 Attached scsi generic sg2 at scsi1, channel 0, id 0, lun 0, type 0 I can no longer mount sdc1; the error is the usual invalid superblock. parted does however list the correct size and filesystem. Any tips on how I can get the array mounted again? And what might have changed since last boot? :) I've rolled my own kernel to get reiser support, but I haven't recompiled or done any changes... Regards, Harald

5 20

Cheap PC's anyone
by Todd Cary 04 Jan '06

04 Jan '06

Wonder how much of this is true and if Linux could be the OS? http://www.latimes.com/business/la-fi-predict1jan01,0,3503327.story -- Ariste Software 2200 D Street Ext Petaluma, CA 94952 (707) 773-4523

4 5

way to disable keyboard and mouse ports
by Jerry Geis 04 Jan '06

04 Jan '06

Is there a way to disable the keyboard and mouse ports? I have a machine in a public area running an application that no-one needs to touch. However, someone could come up and plug a keyboard in it and mouse and be logged in as that user (not root). Is there a way to disable the mouse and keyboard so only remote ssh connections will control the PC if changes need to be made. This would also include any usb device which is fine and the PS2 keyboard and mouse. Thanks, Jerry

4 3

Crashing Nameservers
by John Hinton 03 Jan '06

03 Jan '06

Had two nameservers crash in the last few hours... This 'never' happens! On the console was sent an invalid ICMP type 3, code 3 error to a broadcast: 255.255.255.255 on eth0 sent an invalid ICMP type 3, code 3 error to a broadcast: 255.255.254.255 on eth0 with the IP address of the offender? in front of that line. Any ideas? Best, John Hinton

7 8

Determine what changed between CentOS 4.1 and CentOS 4.2
by Fong Vang 03 Jan '06

03 Jan '06

Is there a way to determine what package changed from CentOS 4.1 to 4.2 (or between any two versions)? I need to create a yum repository to upgrade some machines that cannot talk to the Internet. Thanks for any help. ID:FONGVANG

4 5

64-bit CentOS 4.2
by Fong Vang 03 Jan '06

03 Jan '06

What exactly is different between the 32 and 64-bit version of CentOS 4.2? The kernel (drivers, file system, etc.) is probably compiled to support 64-bit and probably glibc. What're some important differences between the 32 and 64-bit version? I'm just trying to get a deeper understanding. Thanks in advance for any help. FongVang

2 1

Linux boot floppy to install over net
by Robert Moskowitz 03 Jan '06

03 Jan '06

With all this going on, it seems to me there MUST be a floppy image that will load the minimum shell (including PCMCIA drivers!) and all over-the-net installs (HTTP, FTP, of NFS). That would really help on one old notebook I have. Oh, and of course this is for CentOS 4.2!

8 13

date in logrotate
by Jim Perrin 03 Jan '06

03 Jan '06

Quick logrotate question for the group. To comply with a PHB mandate, I need to keep our apache logs for a minimum of 2 years, and will be periodically required to hand over chunks of the logs from specific dates/times. While extending the timeframe of logrotate is easy, I've found that there's no elegant solution in the RH/CentOS logrotate for appending dates to the filename. I'm curious to know what others with similar requirements are doing for this. I'd like to stay within the default system framework (no 3rd party apps as they have to be "approved"), so mostly I'm looking for suggestions for a more elegant postrotate script. Thanks

3 2

DNS wizard
by Sam Drinkard 03 Jan '06

03 Jan '06

Do we have anyone here who is a bind/dns wizard? I've been under the impression my dns setup which I've used for so many years on a bsd machine is now considered lame. If there is someone who would not mind taking a look at my configuration to see where I'm missing something, or where the difference lies between bind 9 and previous bind 8 configs? I'd prefer to do this off list via direct e-mail. The zone is very small, and the files are small too.. Sam

9 38

RE: [CentOS] Version download problem?
by Young, Darren 03 Jan '06

03 Jan '06

> Yep. They're obsolete, and we're trying to save > space/bandwidth on the mirrors, since the space is donated. > 3.6 is 3.1 with all the > updates+errata. If you REALLY need 3.1 for some hellish reason, you'll > need to get it from the vault. ( vault.centos.org ) Hellish, maybe -> Tivoli Storage Manager. Actually, what I need is kernel 2.4.21-4.0.1 according to IBM. I thought that since that version was in an older version of the "other enterprise linux" it would be in an older CentOS as well. Am I correct in this assumption or fighting a losing battle? Not sure how *hard* that requirement is, might just be kernel 2.4.whatever, but I have to find out. Was that version in 3.0 or 3.1 of CentOS? Also have a requirement for kernel 2.4 from the Tivoli Integrated Solution Console as well. Not sure on this requirement as well, I do know that with CentOS 4 the installer blew up with "unsupported kernel version xxx". Tried tricking the installer by replacing the uname binary with a script that returned what the other linux gives from `uname -a` but it didn't work.

5 5

Install challenges
by Robert Moskowitz 03 Jan '06

03 Jan '06

As mentioned in my previous post I just completed a rebuild on my new dns/mail server. And it was almost a disaster. When loading from CDs I would get a dialog that an rpm could not be found, perhaps bad media. I would pop out the CD, click OK and things continued. Until finally it would not. I had two copies of the CDs and neither worked! So I happened to have the CDs on my web server (NT running Apache 2.something old) and since these systems were on the same subnet I opted for an HTTP install. Got that going and about 25% in, it hung. And no way to tell it, please try the server again. (other systems could access the server and see the files in question). I tried to get apache running on another Linux system I am building but took a wrong turn there so I desperation I tried the CD install. Everything was working this time until disk 3 about the last rpm. ARGH! So I took the CD out and cleaned it really well, and it found the rpm ni question. Oh what a weekend. I have GOT to get a good way to do an install......

3 2

Re: [CentOS] Yumex
by B.J. McClure 03 Jan '06

03 Jan '06

> In case anybody is interested, I found a version of Yumex that will > work with CentOS 4.2. It is from another RHEL clone, Scientific Linux. > This is the URL. > > ftp://ftp.scientificlinux.org/linux/scientific/42/i386/SL/RPMS/yumex-0.42-9… > > Cheers....Paul I've been successfully running yumex from pbone at following link: http://rpm.pbone.net/index.php3/stat/4/idpl/2450935/com/yumex-0.42-9.0.noar… Cheers, bj Cent OS 4, Linux 2.6.9-22.0.1.EL athlon 06:27:55 up 18:57, 2 users, load average: 0.25, 0.16, 0.10

4 3

RE: [CentOS] centos 4.2 update - help!
by Terry Tai 03 Jan '06

03 Jan '06

Thanks for all kind comment, After choosing one nearest mirror site, the update problem was fixed. Regards Terry -----Original Message----- From: Igor Kresnik [mailto:kresnik.igor@gmail.com] Sent: 星期一, 2 一月, 2006 18:14 To: CentOS mailing list Subject: Re: [CentOS] centos 4.2 update - help! try use command yum regards Igor Terry Tai pravi: > > Hello > I have installed centos 4.2 in dell poweredge 850. but I found that > when I launch up2date to do a update action, it always get time out > problem. just like > > error while retrieving package gtk 2-2.14.13-18 > the message is time out > > any one can give some help > > Thanks and Regards > Terry > > ************************************ E-mail Disclaimer > ************************************ > > This e-mail message (together with any attachments) is confidential to > the addressee > > and may also be privileged. If you are not the intended recipient, you > are hereby notified > > that any dissemination, distribution or copying of this message is > strictly prohibited. > > Please also notify the sender immediately by return e-mail and delete > it from your system. > > Internet communications cannot be guaranteed to be secure or error-free. > > The sender and the entity through which this message is sent therefore > do not accept > > liability for errors or omissions as contained in the message and any > spreading of viruses > > as a result of Internet transmission. > > Any opinions contained in this message are those of the sender > personally and would > > not bind any entity unless otherwise clearly stated and with the > authority of the sender > > duly verified. > > **************************************************************************** *************** > > > ------------------------------------------------------------------------ > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos > _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

Reading the Output of DF
by Todd Cary 02 Jan '06

02 Jan '06

I am not sure how to interpret the output of the DF -h command. Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 112G 12G 95G 11% / /dev/hda1 99M 12M 82M 13% /boot none 125M 0 125M 0% /dev/shm The filesystem Centos is using is new to me since I have RH 9 on my other server. I assume the FS combines my two drives into the virtual drive. What I do not understand is the "none" filesystem and how that relates to the "VolGroup00-LogVol00", if at all. Todd -- Ariste Software 2200 D Street Ext Petaluma, CA 94952 (707) 773-4523

3 2

Bash 2 on Centos 4.2
by Adriano Frare 02 Jan '06

02 Jan '06

Dear Friends, I need package bash2, but I didn't find it. Thanks Adriano

2 2

PHP not working with Mysql?
by fred.dehmel＠chefmail.de 02 Jan '06

02 Jan '06

Hi, I installed MySQL via YUM on an actual CentOS coming with this great bluequartz and it seems they won´t to play with each other. MySQL is working, phpinfo shows me. that it is there. Now i transfered some of my stuff and nothing works: phpmyadmin (with correct inc.php) tells me, that my php-Installation isn´t correct, a little cms (Contenido) shows white pages. Mysqld.log tells me, that all is ok, phpinfo the same. Any idea, what my mistake is? Thanks! Fred 1 Million Singles in Ihrer Nahe. Finden Sie Ihren Traumpartner bei Deutschlands beliebtester Partnerboerse: http://singles.freenet.de/index.html?pid=11512

2 1

Kernel
by Admin 02 Jan '06

02 Jan '06

Hi list anyone know what kernel latest CentOS uses? Thanks in advance Regards Jan Erik

2 1

RE: [CentOS] centos 4.2 update - help!
by Terry Tai 02 Jan '06

02 Jan '06

Hello I have installed centos 4.2 in dell poweredge 850. but I found that when I launch up2date to do a update action, it always get time out problem. just like error while retrieving package gtk 2-2.14.13-18 the message is time out any one can give some help Thanks and Regards Terry ************************************ E-mail Disclaimer ************************************ This e-mail message (together with any attachments) is confidential to the addressee and may also be privileged. If you are not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this message is strictly prohibited. Please also notify the sender immediately by return e-mail and delete it from your system. Internet communications cannot be guaranteed to be secure or error-free. The sender and the entity through which this message is sent therefore do not accept liability for errors or omissions as contained in the message and any spreading of viruses as a result of Internet transmission. Any opinions contained in this message are those of the sender personally and would not bind any entity unless otherwise clearly stated and with the authority of the sender duly verified. *******************************************************************************************

3 2

Yumex
by Paul Vandenberg 01 Jan '06

01 Jan '06

In case anybody is interested, I found a version of Yumex that will work with CentOS 4.2. It is from another RHEL clone, Scientific Linux. This is the URL. ftp://ftp.scientificlinux.org/linux/scientific/42/i386/SL/RPMS/yumex-0.42-9… Cheers....Paul

1 0

noprobe boot option with askmethod and NFS install
by Jerry Geis 31 Dec '05

31 Dec '05

>insmod <module> should do it On 31/12/05, Jerry Geis <geisj at pagestation.com <http://lists.centos.org/mailman/listinfo/centos>> wrote: >/ />/ If you specify noprobe at boot can you then manually />/ specify to load the 8139too network module? If so how? />/ />/ Thanks, />/ />/ jerry I am trying to to boot with askmethod to do an nfs install I did the noprobe insmod 8139too and it did not load the network driver. Did I miss something? my command is "linux askmethod noprobe insmod 8139too" Thanks, Jerry /

1 0

noprobe boot option
by Jerry Geis 31 Dec '05

31 Dec '05

If you specify noprobe at boot can you then manually specify to load the 8139too network module? If so how? Thanks, jerry

2 1

RE: Intel Corporation 82573V Gigabit Ethernet Controller
by Gerald Waugh 31 Dec '05

31 Dec '05

> > Attempting to install CentOS on a new MSI MB (MS 9618), which > uses the subject controllers. > There are two controllers on the board, seems as though only > one can be used. > I have to manually init, using ifconfig eth0, to use it. > > I understand that the Ethernet controller drivers are not available. > Is there any news on this or a possible date when drivers > will be incorporated into the install. > > lspci reads; > 03:00.0 Ethernet controller: Intel Corporation 82573V Gigabit > Ethernet Controller (Copper) (rev 03) > 04:00.0 Ethernet controller: Intel Corporation 82573V Gigabit > Ethernet Controller (Copper) > > I find that on bootup the Intel boot loader indicates that > The Ethernet port is corrupted or not initalized, now I assume that > the boot loader is in the ROM, as it comes up early in the > boot process. > > Dmesg says; > ======================================================= > Intel(R) PRO/1000 Network Driver - version 6.0.54-k2-NAPI > Copyright (c) 1999-2004 Intel Corporation. > ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 10 (level, low) -> IRQ 10 > PCI: Setting latency timer of device 0000:03:00.0 to 64 > divert: allocating divert_blk for eth0 > e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection > ACPI: PCI interrupt 0000:04:00.0[A] -> GSI 11 (level, low) -> IRQ 11 > PCI: Setting latency timer of device 0000:04:00.0 to 64 > e1000: 0000:04:00.0: e1000_probe: The EEPROM Checksum Is Not Valid > e1000: probe of 0000:04:00.0 failed with error -5

4 4

audio and video streaming, equipment, and centos 4
by Robert Hanson 31 Dec '05

31 Dec '05

greetings... and a heartfelt happy upcoming new year to everyone! scenario: company wants to stream realtime audio and/or video streams of their meetings i have done "a decent amount" of research on the necessary server side software to integrate into centos. not sure i like all that i see though. since the company is on about a 1.5 meg circuit i would expect to hook the equipment into a small centos box at the church which would forward a single stream to a centos server i have at the pop and feed all the client streams from where the bandwidth is. that is, if i am understanding everything correctly. so i felt it best to check the wisdom of the list on those already doing this for the church or other private or commercial entities. may i enquire as to what you are using for the server software? and, may i ask what *specific* hardware for audio and video devices you are using to do this please? something reasonably affordable? any extra guidance or instructions i should be researching or studying to implement this? if you find this is too OT and you wish to reply off list i would be happy to post to the list at a later date the results of the research and implementation i thank you in advance and kind regards, - rh -- Robert Hanson - Abba Communications Computer & Internet Services (509) 624-7159 - www.abbacomm.net

1 0

3ware error
by Denis Croombs 31 Dec '05

31 Dec '05

I am getting this error:- 3w-9xxx: scsi0: ERROR: (0x03:0x0104): SGL entry has illegal length:address=0x3744A000, length=0xFF, cmd=X. In dmesg it finds the controller OK:- 3ware 9000 Storage Controller device driver for Linux v2.26.02.001. ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 11 (level, low) -> IRQ 11 scsi0 : 3ware 9000 Storage Controller 3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xf2000000, IRQ: 11. 3w-9xxx: scsi0: Firmware FE9X 2.06.00.009, BIOS BE9X 2.03.01.051, Ports: 8. Using cfq io scheduler Vendor: AMCC Model: 9500S-8 DISK Rev: 2.06 Type: Direct-Access ANSI SCSI revision: 03 SCSI device sda: 781137920 512-byte hdwr sectors (399943 MB) SCSI device sda: drive cache: write back, no read (daft) sda: sda1 sda2 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Any clues ? It is a Centos 4.2 I386 system (fully updated) and it appears to be working with no problems except this error. (The controller has 6 x 80Gbyte 7200 SATA drives attached in raid 5 config) Thanks Denis

3 2

Missing GPG sigs on Centos 4.2 SRPMS
by Maciej Żenczykowski 31 Dec '05

31 Dec '05

Howdy folks, $ cd /opt/mirrors/centos/4.2 $ find -type f | grep "\.rpm" | while read i; do rpm -K "$i"; done | egrep -v ": $sha1$ dsa sha1 md5 gpg OK\$" centosplus/SRPMS/reiserfs-utils-3.6.19-2.1.src.rpm: sha1 md5 OK extras/SRPMS/drbd-0.7.14-1.centos4.src.rpm: sha1 md5 OK extras/SRPMS/ipvsadm-1.24-6.src.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: GPG#db42a60e) updates/SRPMS/ethereal-0.10.13-1.EL4.1.src.rpm: sha1 md5 OK The previous packages seem to lack gpg signatures (and ipvsadm seems to have a signature unlike all the other packages...) Cheers, MaZe.

3 3

RE: [CentOS] RPMS's rebuilt or upstream one's used
by Bowie Bailey 31 Dec '05

31 Dec '05

Aleksandar Milivojevic wrote: > Quoting Jim Smith <jim_smith2006(a)yahoo.com>: > > > Ah yes something else i forgot about(which i build > > from upstream) was the fedora-rpm tools, which allow > > you to build rpm's as non-root. > > You don't need any additional tools to build RPMs as normal user. You just > need to create .rpmmacros file in your home directory. See below for an > example. You'll need to create ~/rpm/build and ~/rpm/tmp directories. When > you have those directories created and .rpmmacros file in place, you just > "rpm -ihv source.rpm" (as yourself, not as root) go to the > ~/rmp/pkgname-ver-rel directory and do "rpmbuild -options-here pkgname.spec". > > Example of ~/.rpmmacros file: > > %packager Aleksandar Milivojevic <alex(a)milivojevic.org> > > %_signature gpg > %_gpgbin /usr/bin/gpg > %_gpg_path /home/alex/.gnupg > %_gpg_name alex(a)milivojevic.org > > %_topdir /home/alex/rpm > %_tmppath %{_topdir}/tmp > %_builddir %{_topdir}/build > > %_rpmtopdir %{_topdir}/%{name}-%{version}-%{release} > %_sourcedir %{_rpmtopdir} > %_specdir %{_rpmtopdir} > %_rpmdir %{_topdir}/RPMS > %_srcrpmdir %{_topdir}/RPMS > %_rpmfilename %%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.rpm I just use this quick procedure: mkdir $HOME/rpm mkdir $HOME/rpm/SOURCES mkdir $HOME/rpm/SPECS mkdir $HOME/rpm/BUILD mkdir $HOME/rpm/SRPMS mkdir $HOME/rpm/RPMS mkdir $HOME/rpm/RPMS/i386 echo "%_topdir $HOME/rpm" >> $HOME/.rpmmacros -- Bowie

3 3

x window can't start. monitor out of range
by adrian kok 31 Dec '05

31 Dec '05

Hi all I change the monitor to LG LCD but x window couldn't start because of the "out of range" signal in the monitor How can I fix this problem Thank you

3 3

RPM conflicts - help!
by Benjamin Smith 31 Dec '05

31 Dec '05

I'm building a database/application server with a Dual-Opteron 64 bit system. I need to run PHP4, Apache, and Postgres 8.1, but I'm having conflicts with Postgres 8.1 and PHP 4 that comes with CentOS. History: 1) I installed Apache and PHP with yum. 2) I then installed PostgreSQL 8.1 RPMs from the PG website. 3) Then, I tried to install php-pgsql with yum - and it didn't work, complaining about pgsql.so.3. So, I installed with --nodeps and symlinked the /usr/lib64/libpq.so.4 -> /usr/lib64/libpq.so.3. Now, PHP and PGSQL work without any problems. But now, I can't do a yum update - it still complains about pgsql.so.3! What can I do to resolve this? Thanks, -Ben -- "The best way to predict the future is to invent it." - XEROX PARC slogan, circa 1978

5 19

RPMS's rebuilt or upstream one's used
by Jim Smith 31 Dec '05

31 Dec '05

RPMS's rebuilt or upstream one's used Hi I got a cleanly reinstalled 4.2 workstation. However i still needed to build the following SRPMS from Mandriva/Fedora :- - Chkrootkit - Logcheck - Tripwire - Xboard & Gnuchess - Rkhunter I needed to use the upstream versions of :- - OpenOffice.org 2.0.1 - RealPlayer Gold - Acrobat Reader I needed to tweak Bind chroot to log queries and adopt a BSD style UID>1000. All redhat-based systems come with the inevitable tonne of services on by default. Is this the same situation with everyone else? I know Karanbir produces some home made rpm' but obviously not all of the above. Dag's repo is also cool but not as extensive as Fedora Extras. Are there any plans to provide goodies like - pup - yumex/yum utils now that Fedora has dropped Up2date? __________________________________ Yahoo! for Good - Make a difference this year. http://brand.yahoo.com/cybergivingweek2005/

4 7

x86_64 box need to compile and link program for i386
by Jerry Geis 30 Dec '05

30 Dec '05

I have an x86_64 box. I have a program I need to compile with the 32 bit compiler and linker. Are there directions explaining how to do that somplace? Or can someone provide details. THanks, Jerry

2 1

yum vs rpm
by Bowie Bailey 30 Dec '05

30 Dec '05

If I have a local rpm file, what is the difference between running "rpm -i" and "yum localinstall"? When I do "rpm -i", I can still see the info via "yum info", so is there a difference? -- Bowie

3 2

Unknown CUPS Signature
by Darren Young 30 Dec '05

30 Dec '05

Updating a 3.6 installation and during the CUPS update I get: "The package cups-1.1.17-13.3.34 is signed with an unknown GPG signature. Continue?" Said no for the moment. Safe to ignore this one? ------------------------------- Darren Young Senior UNIX Admin University of Chicago Graduate School of Business -------------------------------

2 1

weird problem with outgoing connections
by Roger D Vargas 30 Dec '05

30 Dec '05

After migrating to centos 4, Im having a weird connection problem with online games, Planeshift and Anarchy Online. Im using my own firewall script, that was working fine before installing Centos. I disabled default firewall. Can somebody give me an idea about whats happening? -- Roger D. Vargas http://dsgp.blogspot.com | Linux, programación, juegos ______________________________________________ Renovamos el Correo Yahoo! Nuevos servicios, más seguridad http://correo.yahoo.es

4 4

cyrus idled not in the cyrus-imapd rpm?
by sophana 30 Dec '05

30 Dec '05

Hi I successfully installed cyrus + postfix on my centos 4.2 box. When trying to make imap idle working, I noticed that there is no idled executable in the rpm. Do I have to recompile cyrus from source to get idled working? Thanks

5 6

Kerberos and Winbind both needed for Active Directory??
by Doug Long 30 Dec '05

30 Dec '05

When configuring CentOS 4 to authenticate (for all things, such as ssh and samba shares) against Active Directory is it necessary to check both the Kerberos and Winbind options under "Authentication," or is Winbind alone sufficient (since winbind uses kerberos)? When I have attempted to get this working, I was only able to do it with both kerberos and winbind selected. The other problem I had was that I had to have a local account with the same username. I am sure it is something very small that I am missing, but I just can't figure it out. Any comments or suggestions are highly appreciated.

10 27

CentOS-announce Digest, Vol 10, Issue 12
by centos-announce-request＠centos.org 30 Dec '05

30 Dec '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA:2005-1229-1 CentOS 4 x86_64 libtool - bugfix update (Johnny Hughes) 2. CEBA:2005-1229-1 CentOS 4 i386 libtool - bugfix update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 29 Dec 2005 10:31:49 -0600 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA:2005-1229-1 CentOS 4 x86_64 libtool - bugfix update To: CentOS-Announce <centos-announce(a)centos.org> Message-ID: <1135873909.3574.130.camel(a)myth.home.local> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Bugfix Advisory 2005:1224-1 CentOS 4 x86_64 libtool - Bugfix Update This CEBA fixes the following bug: http://bugs.centos.org/view.php?id=1156 The following files are uploaded and syncing to the mirrors: x86_64: libtool-1.5.6-4.EL4.1.c4.i386.rpm libtool-1.5.6-4.EL4.1.c4.x86_64.rpm libtool-libs-1.5.6-4.EL4.1.c4.x86_64.rpm src: libtool-1.5.6-4.EL4.1.c4.src.rpm

1 0

RE: [CentOS] Version download problem?
by Young, Darren 30 Dec '05

30 Dec '05

> The oldest kernel that we released with CentOS-3 was 2.4.21-9.0.1. That > was at 3.1 which was the oldest official release. I found an EL rpm for 2.4.21-4.0.1 on RHN, seems to be one of the first 3.x kernels, maybe even *the* first. > I can build you a 2.4.21-4.0.1 kernel ... and maybe even a 2.4.21-4.0.1 > install CD if you absolutely need that (I don't have a CentOS-3 build > environment for spinning CD though, I do CentOS-4) ... IF all (or most) > of the rest of the 3.1 level stuff would work. Many thanks for the offer, I can build a new one if necessary but I'm really trying to avoid it. I'm installing 3.6 into VMware right now to find out how picky the various IBM installers truly are. I do know some of them are 'pickier' than others. > BUT ... if you need all stuff before EL3 update 1, that would be fairly > hard. (In fact it would be building a whole new point release :) Yea, I'll just use "the other" EL if it comes down to that. I think WS will work for what I'm doing, it's just a reference build/environment and not production. It will be interesting to see if CentOS can in fact be used for Tivoli Storage Manager, not so much on the OS side, but if IBM's products actually detect the fact that it's not the "real thing". One thing I did find with their Integrated Solutions Console (ISC) was that it seems to read /etc/redhat-release to determine something... Wasn't paying attention to the system calls all that closely, but I did see open(), fseek() and close() on it.

2 1

Building PHP PECL modules
by Aleksandar Milivojevic 30 Dec '05

30 Dec '05

I'm attempting to build some PECL modules on fully updated CentOS 4.2 system. Preferably pack them into nice RPM packages. However, seems I'm missing something. For example, this is what I get for sqlite module: $ pear makerpm SQLite-1.0.3.tgz `phpize' failed The php-devel package is installed (so I do have phpize command). It's just that it is failing. If I unpack the files into directory, and do "pear build" or "pear install", I'm getting a bit more verbose error: $ pear build running: phpize configure.in:9: warning: underquoted definition of PHP_WITH_PHP_CONFIG run info '(automake)Extending aclocal' or see http://sources.redhat.com/automake/automake.html#Extending-aclocal configure.in:32: warning: underquoted definition of PHP_EXT_BUILDDIR configure.in:33: warning: underquoted definition of PHP_EXT_DIR configure.in:34: warning: underquoted definition of PHP_EXT_SRCDIR configure.in:35: warning: underquoted definition of PHP_ALWAYS_SHARED acinclude.m4:19: warning: underquoted definition of PHP_PROG_RE2C configure.in:65: error: possibly undefined macro: AC_PROG_LIBTOOL If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. `phpize' failed I do remember being able to build and install couple of PECL modules some time ago on different CentOS 4.2 system. Howerver, I'm failing to see why the builds are now failing. The two systems look more or less the same (except hardware, the old one was i686, the new one is i586). I'm not an automake/autoconf expert, the above message looks to me more or less like names of Spanish vilages (in other words, I'm completely culeless here). While on the topic of PECL/PEAR, packaging PEAR modules into RPMs kinda works. The "pear makerpm" produces unusable spec files most of the time, but with a bit of editing of those spec files, I got my RPMs. Mostly documentation, "ugly" package names, and by default files get installed outside of PHP/Pear search path (easy to fix manually in spec file). Known bug in pear or am I doing something awfully wrong? Anyhow, any help would be geately appriciated.

4 6

Version download problem?
by Young, Darren 30 Dec '05

30 Dec '05

Trying to download the 3.1 iso's of CentOS and no matter which mirror I go to, or release 3 version, I always see the 3.6 iso's. URL: http://wuarchive.wustl.edu/pub/linux/distributions/centos/3.1/isos/i386/ Shows all of the 3.6 iso files. Some reason why I can't find the older release files? Thanks, Darren Young Senior UNIX Administrator University of Chicago Graduate School of Business

4 4

Thanks for helping
by Sam Drinkard 29 Dec '05

29 Dec '05

To all of you who pointed me in the right direction, thanks. I got the zone file now where it's not likely to be any problems. I found a couple more things I had left out for the MX records too.. All seems to be working correctly now. Whoopeeeeee! Snowman

1 0

disk mounting madness
by Jeff Lasman 29 Dec '05

29 Dec '05

I've got a server running CentOS 4.2; installed as 4.1, kept updated by yum. A few days ago it crashed. I picked it up from the datacenter, and brought it back to the office, where it took a long time to boot because it couldn't find anything. When it finally booted and I logged in I discovered an interesting problem. Only the / partition had loaded. /etc/fstab had all the partitions recognized by their labels. Checking the hard drives showed the labels existed. I even rewrote the disk labels. But the boot procedure couldn't find the drives by their labels. Nor can a "mount -a" command; it says it can't find the info in fstab (though it _is_ there). But long version mount commands work. And when I redo the fstab file to list the devices rather than labels, everything mounts as it should. Any ideas? Jeff -- Jeff Lasman, Nobaloney Internet Services 1254 So Waterman Ave., Suite 50, San Bernardino, CA 92408 Our blists address used on lists is for list email only Phone +1 909 266-9209, or see: "http://www.nobaloney.net/contactus.html"

4 7

Remote print problem
by Todd Cary 29 Dec '05

29 Dec '05

I am running Centos 4 and I am trying to use a printer on a Windows domain that is connected to a Windows XP Pro computer. If I do smbclient //ComputerName/PrinterName password -U UserName and then /> printmode text /> print /tmp/test.txt the printer works. However, if I setup the printer and check the CUPS printers.conf, it appears to be correct, but I get NT_STATUS_UNSUCCESSFUL when I print from OpenOffice or try to print from an Apple iBook. Any suggestions on what I should check? Todd -- Ariste Software 2200 D Street Ext Petaluma, CA 94952 (707) 773-4523

3 10

RE: [CentOS] Building PHP PECL modules
by Bassett, Mark 29 Dec '05

29 Dec '05

-----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Aleksandar Milivojevic Sent: Thursday, December 29, 2005 6:51 AM To: CentOS mailing list Subject: Re: [CentOS] Building PHP PECL modules Jim Perrin wrote: > The packaging of addition php-pear modules is currently being > discussed, but has some issues with it. In the mean time some, if not > all of the php modules you want are available via yum from > dag.wieers.com/packages and centos.karan.org. While not official > centos packages, both packagers are very active in centos development > and are quite good. I know about those, but as usual, I need some more stuff ;-) Anyhow, would be nice to know how Dag and Karanbir managed to compile PECL modules. -------------------------------------------------------- As far as the SQLite package, I just ran into this and evidently SQLite is enabled by default in php, however the centos rpm is explicity set to turn off SQLite support. So, I just snagged the source rpm, edited the SPEC file to remove the --without-sqlite and voila, my custom rpm with SQLite installed. Hope that's helpful.

4 4

how to clean up dependencies packages?
by lnthai2002＠aim.com 29 Dec '05

29 Dec '05

Hi, Does anyone know how to clean up the system, especially the orphan packages. I post this in the forum, but it doesnt seems that nobody interested in this question. In the beginning, my system did not have any kde package but then i installed kaffeine, thus some other kde packages has been installed as dependencies but when i yum remove kaffeine, only kaffeine was removed. The other packages were left. In my Gentoo, i can clean up all the packages that are not installed explicitly but i dont know how to do it in centos. Any suggestion are welcome. THAI ________________________________________________________________________ Check Out the new free AIM(R) Mail -- 2 GB of storage and industry-leading spam and email virus protection.

1 0

RE: [CentOS] Building PHP PECL modules
by Bassett, Mark 29 Dec '05

29 Dec '05

-----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Matt Hyclak Sent: Thursday, December 29, 2005 9:10 AM To: CentOS ML Subject: Re: [CentOS] Building PHP PECL modules On Thu, Dec 29, 2005 at 09:05:23AM -0600, Johnny Hughes enlightened us: > > On Thu, Dec 29, 2005 at 08:36:35AM -0600, Bassett, Mark enlightened us: > > > As far as the SQLite package, I just ran into this and evidently SQLite > > > is enabled by default in php, however the centos rpm is explicity set to > > > turn off SQLite support. So, I just snagged the source rpm, edited the > > > SPEC file to remove the --without-sqlite and voila, my custom rpm with > > > SQLite installed. > > > > > > Hope that's helpful. > > > > > > > I'm guessing that comes from upstream, since they don't distribute SQLite. > > Perhaps a RFE for the CentOS php rpm to enable that would be in order if > > enough folks think it should be included since CentOS *does* distribute > > SQLite. > > We distribute SQLite only for yum ... and that doesn't require SQLite > PHP support :) > > We won't (I don't think) compile the PHP4 with SQLite support, so as to > maintain compatibility with upstream ... though I don't have a problem > with SQLite being in the php5 that is in CentOSPlus That's the one I rebuilt anyway ;) We are a major php shop so we run php5 across the board. I'm all for including that in centosplus. If I remember correctly they also do a --disable-dom but then add it in later with a php-dom rpm package, so I'm not really sure what that one's all about.

1 0

strange log entry
by Robert Moskowitz 29 Dec '05

29 Dec '05

Centos 4.2 Dec 29 10:04:10 z9m9z dbus: Can't send to audit system: USER_AVC pid=1997 uid=81 loginuid=-1 message=avc: denied { send_msg } for scontext=root:system_r:unconfined_t tcontext=user_u:system_r:initrc_t tclass=dbus Dec 29 10:04:45 z9m9z last message repeated 7 times Dec 29 10:05:50 z9m9z last message repeated 13 times Dec 29 10:06:55 z9m9z last message repeated 13 times Dec 29 10:07:56 z9m9z last message repeated 12 times I get this entry a lot.

2 2

A new bitorrent record?
by Chris Mauritz 29 Dec '05

29 Dec '05

One of our interns had to run down to the datacenter today and rescue an ailing 4.2 machine and the decision was made to just do a fresh install and restore a backup from last night. The only problem was that she had forgotten the 4.2 DVD in the office, a 2 hour drive back and forth. So I suggested she fire up her notebook which has a DVD burner and download the DVD via bitorrent instead. So she plugged her notebook in to a free port on our core switch and had the entire DVD downloaded in under 20 minutes. Yow!!! So I thought I'd offer a big thanks to those of you who keep the ISO available for download. Cheers,

2 1

gtk_scrollinglabel pacakage from pear.php.net not compile
by Jerry Geis 29 Dec '05

29 Dec '05

I found this package that is a php class to scroll a message on screen with a gtk wrapper. It wont compile on centos 4.2. http://pear.php.net/package/Gtk_ScrollingLabel It gives me an error about not finding libglade-config after much searching I found libglade-config and installed it. THen I get an error about cant find xml-config.... Can someone who knows more than me help? Thanks if so... Is this a normal process? I would have hoped/thought that this would not be as difficult as this. yum provides libglade-config yum provides xml-config both return nothing found. I'm stuck. Jerry

2 1

libglade-config
by Jerry Geis 29 Dec '05

29 Dec '05

In what package is libglade-config? I have libglade and libglade-devel installed and I cannot find libglade-config thanks, Jerry

2 1

php-gtk
by Jerry Geis 29 Dec '05

29 Dec '05

I have a php app that is looking for php-gtk. Must not come with centos? has anyone used this before? I was looking for a prebuilt package but have not found one... Any pointers? Thanks jerry

1 0

openoffice spellcheck
by Dave 28 Dec '05

28 Dec '05

Anyone use the spell check in OO on Cent4? When I start the spell checker, it has the dialog to change misspelled words, I select the properly spelled words but it never changes the words in the document. Anyone else get this or is there some config I need to set to save changes for the spell checker?

1 0

compaq r4000 and new kernel 2.6.14.5 (used to be sloowwwwr4000)
by Jerry Geis 28 Dec '05

28 Dec '05

Jerry Geis wrote: >/ I finally got the time to try the new kernel. />/ recompiled it and now the compaq r4000 seems like an amd 64 4000+. />/ />/ THe issues of sloowww ness seemed to have gone away. / >Which kernel did you end up with? >Cheers, Chris, The subject line mentioned 2.6.14.5, I downloaded it from kernel.org today. Jerry

3 2

compaq r4000 and new kernel 2.6.14.5 (used to be sloowwww r4000)
by Jerry Geis 28 Dec '05

28 Dec '05

I finally got the time to try the new kernel. recompiled it and now the compaq r4000 seems like an amd 64 4000+. THe issues of sloowww ness seemed to have gone away. Jerry

2 1

Multiple program instances or multiple log ins?
by Robert Moskowitz 28 Dec '05

28 Dec '05

This all comes out of figuring out how I might run Evolution like I run Eudora. I see where Evolution places its data in a hidden directory: ~/.evolution Now why it is felt necessary to put all of this stuff in hidden directories is beyond me. So it would seem that Evolution is treating each useid as a personality for the logged in user. Given the way Evolution organizes its data, I could create some more Linux users, and either: Give my main user file permissions to them and somehow run copies of Evolution using those /home/user directories. Anyone know how to do that? Or do I somehow have to have multiple simultaneous logins? And switch between them? I know there is a way to have 4 desktops....

8 42

New CD-ROM drive causes kernel panic
by Alfred von Campe 28 Dec '05

28 Dec '05

I have a CentOS 4.2 system that had a bad CD-ROM drive. Every time I inserted a CD, the system would hang (no kernel panic, but no response to mouse, keyboard, or even the network - all I could do was hit the reset button). Today I replaced the CD-ROM drive with another I had lying around. The new drive is a 24x10x40 CD-RW. I don't know the exact model of the motherboard (I should have looked while I had the case open earlier this afternoon), but I know it's an Intel desktop motherboard that's at least 5 years old with a 1.7 GHz Pentium 4. Anyway, to make a long story short, now the system won't even boot! Here are the last few lines on the screen: Starting udev: [ OK ] Initializing hardware... storage network audio done [ OK ] Kernel panic - not syncing: drivers/ide/pci/piix.c:394: spin_lock (drivers/ide/ide.c:c037bb68) already locked by drivers/ide/ide-iops.c/ 1234 Any ideas how I can work around this? I've booted from the CentOS 4.2 CD #1 into rescue mode, but I don't know what I should look for next. Other than removing the CD-ROM drive, what can I do to fix this problem? Thanks in advance for any help, Alfred

4 10

Re: [CentOS] App add/delete and changing from CD install to LAN
by Robert Moskowitz 28 Dec '05

28 Dec '05

At 08:42 PM 12/27/2005, Jim Perrin wrote: >On 12/27/05, Robert Moskowitz <rgm(a)htt-consult.com> wrote: > > I just added a couple apps to a server and I was asked to insert CD > > #3. I had wanted to use HTTP to access the distro on my HTTP server. > > > > Now I want to install on another server, so I have a second chance to > > get this right.... > > > >Don't use the "Add or Remove Programs" menu option. It is horribly >broken, and provided because the upstream vendor provides the broken >app as well. Instead, open up a terminal of your choosing and use yum. And what do I ask for say for Thunderbird? yum install thunderbird ? >-- >Jim Perrin >System Architect - UIT >Ft Gordon & US Army Signal Center >_______________________________________________ >CentOS mailing list >CentOS(a)centos.org >http://lists.centos.org/mailman/listinfo/centos

5 9

On compiling for x86_64 on an i386...
by Maciej Żenczykowski 28 Dec '05

28 Dec '05

Hi folks, Anyway, I have a main development system which is P4 based (without EM64T) and a dozen diskless Athlon 64's. I'd like to be able to compile kernel's, etc for the Athlons in x86_64 bit mode. Any idea how to arrange this? I've recompiled the src.rpm for binutils (added a single line "CARGS=--enable-targets=x86_64-linux" to the specfile) and "as --64" doesn't bork anymore, so I'm assuming I've got that right... I'm assuming I next have to do something to gcc? Haven't figured this out yet... Anything else needed? Holiday cheers, MaZe.

2 1

RE: [CentOS] App add/delete and changing from CD install to LAN
by Robert Moskowitz 28 Dec '05

28 Dec '05

At 10:17 AM 12/28/2005, Bassett, Mark wrote: >I will have to figure out what else I had decided add and do that via >yum. >--------------------------- > >If you run yum upgrade you should correct any updates that previously >were not done properly. First, run yum update to get the most recent >repository information, then run yum upgrade. Oh, di not know about: yum upgrade I see I have more fiddling to do....

1 0

RE: [CentOS] App add/delete and changing from CD install to LAN
by Bassett, Mark 28 Dec '05

28 Dec '05

-----Original Message----- Well, I KNOW that I updated system z9m9z with yum update, then came back and added BIND (which I left off in the initial install). But it DID fail on system Port3890 when trying to add Thunderbird and a few other odds and ends. I did just install Thunderbird with: yum install thunderbird I will have to figure out what else I had decided add and do that via yum. --------------------------- If you run yum upgrade you should correct any updates that previously were not done properly. First, run yum update to get the most recent repository information, then run yum upgrade.

1 0

amd64 benchmarks
by Chris Mauritz 28 Dec '05

28 Dec '05

Has anyone here benchmarked 64-bit 4.2 against a dual core opteron (or Athlon 64x2) vs a pair of physical single-core opterons? It's that time of year again....ordering new workstations. 8-) Cheers,

2 3

Re: logwatch patch
by Sharon Kimble 28 Dec '05

28 Dec '05

Kai Schaetzl wrote: > Robert Tate wrote on Sun, 25 Dec 2005 01:22:18 -0500: > >> I just installed CentOS a few weeks ago and am still learning about this >> distros' methods and such, but I vote for sending out a patch or fixed >> package for it. > > You should be aware that the Logwatch installed with RHEL and CentOS is > *quite* old. Logwatch current is at 7.1. I installed it two weeks ago or > so and it works fine. I don't remember getting any yum information, > though. I didn't notice that until you mentioned it. I'll check about this > when I'm back from vacation. Maybe it was just a period with no updates. > If you do any tuning and want to have that included in the source you > better patch against a current Logwatch and submit that diff. > All in all the logwatch scripts look very much like catering for RH > products, so I'd be a bit puzzled if a newer Logwatch would miss on this. > I installed it on Suse systems as well and had to tune it heavily to get > some decent reporting because it missed the log files and is very > dependant on applications logging to their own log file. > Becuase of this thread I installed the newest logwatch program and can confirm that it =does= show a yum output of what programs have been installed/removed, and it all works very well. Sharon. -- 11:49:22 up 3 days, 2:12, 1 user, load average: 1.48, 1.49, 1.45 A taste of linux http://www.sharons.org.uk/taste/index.html efever http://www.efever.blogspot.com/ Centos 4.2, KDE 3.5.0-1.7, OpenOffice 2.0.1 Registered Linux user 334501

1 0

App add/delete and changing from CD install to LAN
by Robert Moskowitz 28 Dec '05

28 Dec '05

I just added a couple apps to a server and I was asked to insert CD #3. I had wanted to use HTTP to access the distro on my HTTP server. Now I want to install on another server, so I have a second chance to get this right....

2 1

logwatch patch
by Aleksandar Milivojevic 27 Dec '05

27 Dec '05

Don't remember if I already wrote about this. But ran into it tonibhg again. Logwatch as distributed with CentOS expects yum log files in different format. As result, logwatch will not report anything. The patch is really simple (and attached). Hopefully it'll be part of 4.3 (if not sooner). The upstream is not likely to patch it, since they don't distribute yum at all. Maybe upstream's upstream, but than we'd have to wait for upstream to have reason to uply upstream's upstream change ;-) I guess it's kind of bordercase. But since it applies to something where upstream and CentOS are different anyhow, maybe it is OK to introduce this change.

5 8

Compiling kernel-2.6.13...
by Jose Alburquerque 27 Dec '05

27 Dec '05

Hi. I'm trying to use CentOS4.2 for some audio work (ie. sound editing, etc.). I found a site called PlanetCCRMA (http://ccrma.stanford.edu/planetccrma/software/) and decided that I would give some of their applications a try (hoping that it would not affect my system greatly!). At first I tried the Fedora 3 packages (and they do work), but what I really wanted to do is to download the source packages and rebuild them for my system. I was able to successfully build their custom kernel-2.6.10-2.1.ll for my system but they have one available (kernel-2.6.13) that would run my system a little more efficiently (which I need because my system is a Pentium III and I just can't afford a new system just yet). Any how, I tried to compile the source rpm only to encounter an error to the effect of: ./include/linux/kernel.h:10:20: stdarg.h: No such file or directory Is there something wrong that I can't compile this kernel? P.S. I've also tried compiling other kernel versions that they have such as 2.6.11 and 2.6.12 (with exactly the same error message). I "googled" the problem and found that it might have to do with gcc (http://www.linuxquestions.org/questions/showthread.php?p=1732038) Can anyone help me compiling new kernel? I've posted full error message below. Thanks! Sincerely Jose -------------- [ Mon Dec 26 09:27 PM ] [jose@sweety /usr/src/redhat/SPECS]$ rpmbuild --rebuild --target i686 kernel-2.6.13-0.3.rdt.src.rpm Installing kernel-2.6.13-0.3.rdt.src.rpm warning: user machbuild does not exist - using root warning: group machbuild does not exist - using root warning: user machbuild does not exist - using root warning: group machbuild does not exist - using root warning: user machbuild does not exist - using root warning: group machbuild does not exist - using root warning: user machbuild does not exist - using root warning: group machbuild does not exist - using root warning: user machbuild does not exist - using root warning: group machbuild does not exist - using root warning: user machbuild does not exist - using root warning: group machbuild does not exist - using root warning: user machbuild does not exist - using root warning: group machbuild does not exist - using root warning: user machbuild does not exist - using root warning: group machbuild does not exist - using root warning: user machbuild does not exist - using root warning: group machbuild does not exist - using root warning: user machbuild does not exist - using root warning: group machbuild does not exist - using root warning: user machbuild does not exist - using root warning: group machbuild does not exist - using root warning: user machbuild does not exist - using root warning: group machbuild does not exist - using root warning: user machbuild does not exist - using root warning: group machbuild does not exist - using root warning: user machbuild does not exist - using root warning: group machbuild does not exist - using root warning: user machbuild does not exist - using root warning: group machbuild does not exist - using root warning: user machbuild does not exist - using root warning: group machbuild does not exist - using root warning: user machbuild does not exist - using root warning: group machbuild does not exist - using root warning: user machbuild does not exist - using root warning: group machbuild does not exist - using root warning: user machbuild does not exist - using root warning: group machbuild does not exist - using root Building target platforms: i686 Building for target i686 Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.70576 + umask 022 + cd /usr/src/redhat/BUILD + LANG=C + export LANG + unset DISPLAY + '[' '!' -d kernel-2.6.13/vanilla ']' + cd kernel-2.6.13 + rm -rf linux-2.6.13 + cp -rl vanilla linux-2.6.13 + cd linux-2.6.13 + echo 'Patch #19999 (kernel-subsublevel.patch):' Patch #19999 (kernel-subsublevel.patch): + patch -p1 -s + echo 'Patch #20330 (patch-2.6.13-rt2):' Patch #20330 (patch-2.6.13-rt2): + patch -p1 -s + echo 'Patch #802 (linux-2.6.12-nonintconfig.patch):' Patch #802 (linux-2.6.12-nonintconfig.patch): + patch -p1 -s + echo 'Patch #900 (linux-2.6.7-modsign-core.patch):' Patch #900 (linux-2.6.7-modsign-core.patch): + patch -p1 -s + echo 'Patch #901 (linux-2.6.12-modsign-crypto.patch):' Patch #901 (linux-2.6.12-modsign-crypto.patch): + patch -p1 -s + echo 'Patch #902 (linux-2.6.7-modsign-ksign.patch):' Patch #902 (linux-2.6.7-modsign-ksign.patch): + patch -p1 -s + echo 'Patch #903 (linux-2.6.7-modsign-mpilib.patch):' Patch #903 (linux-2.6.7-modsign-mpilib.patch): + patch -p1 -s + echo 'Patch #904 (linux-2.6.7-modsign-script.patch):' Patch #904 (linux-2.6.7-modsign-script.patch): + patch -p1 -s + echo 'Patch #905 (linux-2.6.7-modsign-include.patch):' Patch #905 (linux-2.6.7-modsign-include.patch): + patch -p1 -s + echo 'Patch #3020 (linux-2.6.9-ipw2100.patch):' Patch #3020 (linux-2.6.9-ipw2100.patch): + patch -p1 -s + echo 'Patch #3021 (linux-2.6.9-ipw2200.patch):' Patch #3021 (linux-2.6.9-ipw2200.patch): + patch -p1 -s + echo 'Patch #3022 (linux-2.6.9-ieee80211.patch):' Patch #3022 (linux-2.6.9-ieee80211.patch): + patch -p1 -s + echo 'Patch #20520 (linux-2.6.12-rc6-ieee80211.patch):' Patch #20520 (linux-2.6.12-rc6-ieee80211.patch): + patch -p1 -s + cp /usr/src/redhat/SOURCES/COPYING.modules Documentation/ + mkdir configs + cp -fv /usr/src/redhat/SOURCES/kernel-2.6.13-i586-smp.ccrma.config /usr/src/redhat/SOURCES/kernel-2.6.13-i586.ccrma.config /usr/src/redhat/SOURCES/kernel-2.6.13-i686-smp.ccrma.config /usr/src/redhat/SOURCES/kernel-2.6.13-i686.ccrma.config . `/usr/src/redhat/SOURCES/kernel-2.6.13-i586-smp.ccrma.config' -> `./kernel-2.6.13-i586-smp.ccrma.config' `/usr/src/redhat/SOURCES/kernel-2.6.13-i586.ccrma.config' -> `./kernel-2.6.13-i586.ccrma.config' `/usr/src/redhat/SOURCES/kernel-2.6.13-i686-smp.ccrma.config' -> `./kernel-2.6.13-i686-smp.ccrma.config' `/usr/src/redhat/SOURCES/kernel-2.6.13-i686.ccrma.config' -> `./kernel-2.6.13-i686.ccrma.config' + for i in '*.config' + perl -p -i -e 's|CONFIG_PREEMPT_RT=y|# CONFIG_PREEMPT_RT is not set|g' kernel-2.6.13-i586-smp.ccrma.config + perl -p -i -e 's|# CONFIG_PREEMPT_DESKTOP is not set|CONFIG_PREEMPT_DESKTOP=y|g' kernel-2.6.13-i586-smp.ccrma.config + perl -p -i -e 's|CONFIG_PREEMPT_HARDIRQS=y|CONFIG_PREEMPT_HARDIRQS=y\n# CONFIG_SPINLOCK_BKL is not set|g' kernel-2.6.13-i586-smp.ccrma.config + : + for i in '*.config' + perl -p -i -e 's|CONFIG_PREEMPT_RT=y|# CONFIG_PREEMPT_RT is not set|g' kernel-2.6.13-i586.ccrma.config + perl -p -i -e 's|# CONFIG_PREEMPT_DESKTOP is not set|CONFIG_PREEMPT_DESKTOP=y|g' kernel-2.6.13-i586.ccrma.config + perl -p -i -e 's|CONFIG_PREEMPT_HARDIRQS=y|CONFIG_PREEMPT_HARDIRQS=y\n# CONFIG_SPINLOCK_BKL is not set|g' kernel-2.6.13-i586.ccrma.config + : + for i in '*.config' + perl -p -i -e 's|CONFIG_PREEMPT_RT=y|# CONFIG_PREEMPT_RT is not set|g' kernel-2.6.13-i686-smp.ccrma.config + perl -p -i -e 's|# CONFIG_PREEMPT_DESKTOP is not set|CONFIG_PREEMPT_DESKTOP=y|g' kernel-2.6.13-i686-smp.ccrma.config + perl -p -i -e 's|CONFIG_PREEMPT_HARDIRQS=y|CONFIG_PREEMPT_HARDIRQS=y\n# CONFIG_SPINLOCK_BKL is not set|g' kernel-2.6.13-i686-smp.ccrma.config + : + for i in '*.config' + perl -p -i -e 's|CONFIG_PREEMPT_RT=y|# CONFIG_PREEMPT_RT is not set|g' kernel-2.6.13-i686.ccrma.config + perl -p -i -e 's|# CONFIG_PREEMPT_DESKTOP is not set|CONFIG_PREEMPT_DESKTOP=y|g' kernel-2.6.13-i686.ccrma.config + perl -p -i -e 's|CONFIG_PREEMPT_HARDIRQS=y|CONFIG_PREEMPT_HARDIRQS=y\n# CONFIG_SPINLOCK_BKL is not set|g' kernel-2.6.13-i686.ccrma.config + : + for i in '*.config' + mv kernel-2.6.13-i586-smp.ccrma.config .config ++ head -1 .config ++ cut -b 3- + Arch=i386 + '[' i386 '!=' xen ']' + make ARCH=i386 nonint_oldconfig + echo '# i386' + cat .config + for i in '*.config' + mv kernel-2.6.13-i586.ccrma.config .config ++ head -1 .config ++ cut -b 3- + Arch=i386 + '[' i386 '!=' xen ']' + make ARCH=i386 nonint_oldconfig + echo '# i386' + cat .config + for i in '*.config' + mv kernel-2.6.13-i686-smp.ccrma.config .config ++ head -1 .config ++ cut -b 3- + Arch=i386 + '[' i386 '!=' xen ']' + make ARCH=i386 nonint_oldconfig + echo '# i386' + cat .config + for i in '*.config' + mv kernel-2.6.13-i686.ccrma.config .config ++ head -1 .config ++ cut -b 3- + Arch=i386 + '[' i386 '!=' xen ']' + make ARCH=i386 nonint_oldconfig + echo '# i386' + cat .config + perl -p -i -e 's/^SUBLEVEL.*/SUBLEVEL = 13/' Makefile + perl -p -i -e 's/^EXTRAVERSION.*/EXTRAVERSION = -prep/' Makefile + find . -name '*.orig' -exec rm -fv '{}' ';' removed `./crypto/api.c.orig' removed `./crypto/Kconfig.orig' removed `./include/linux/module.h.orig' removed `./include/linux/crypto.h.orig' removed `./init/Kconfig.orig' removed `./kernel/irq/handle.c.orig' removed `./kernel/Makefile.orig' removed `./kernel/module.c.orig' removed `./scripts/kconfig/conf.c.orig' removed `./scripts/kconfig/Makefile.orig' + find . -name '*~' -exec rm -fv '{}' ';' + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.41487 + umask 022 + cd /usr/src/redhat/BUILD + cd kernel-2.6.13 + LANG=C + export LANG + unset DISPLAY + gpg --homedir . --batch --gen-key /usr/src/redhat/SOURCES/genkey gpg: WARNING: unsafe permissions on homedir "." ++++++++++++++++++++.+++++++++++++++.+++++.++++++++++.++++++++++.+++++..++++++++++++++++++++++++++++++.++++++++++.++++++++++.+++++.+++++++++++++++.!.+++++.+++++++++++++++++++++++++++++++++++++++++++++..+++++.+++++.+++++.+++++++++++++++++++++++++++++++++++++++++++++.++++++++++...+++++!.++++++++++++++++++++++++++++++.+++++++++++++++++++++++++..++++++++++.++++++++++..+++++.+++++++++++++++++++++++++.++++++++++.++++++++++!++++++++++.++++++++++.+++++.+++++.+++++++++++++++..+++++..+++++..+++++++++++++++++++++++++.+++++.++++++++++++++++++++++++++++++.++++++++++!+++++++++++++++.+++++...++++++++++.+++++.+++++.++++++++++..+++++.+++++++++++++++.+++++++++++++++++++++++++++++++++++.++++++++++.++++++++++!.+++++.+++++..++++++++++.+++++++++++++++++++++++++.+++++++++++++++..+++++.++++++++++..++++++++++++++++++++++++++++++++++++++++.++++++++++!+++++..+++++.++++++++++++++++++++++++++++++.+++++.+++++.+++++...+++++.+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++!+++++.+++++++++++ +++++++++++++++++++++++++++++++++++++++.++++++++++.+++++++++++++++.+++++++++++++++.++++++++++++++++++++++++++++++!++++++++++++++++++++++++++++++++++++++++..+++++++++++++++.+++++++++++++++.+++++++++++++++.+++++.+++++++++++++++++++++++++++++++++++!++++++++++..++++++++++.++++++++++.+++++++++++++++++++++++++..+++++..++++++++++ + gpg --homedir . --export --keyring ./kernel.pub Red gpg: WARNING: unsafe permissions on homedir "." + make linux-2.6.13/scripts/bin2c /usr/bin/gcc linux-2.6.13/scripts/bin2c.c -o linux-2.6.13/scripts/bin2c + linux-2.6.13/scripts/bin2c ksign_def_public_key __initdata + cd linux-2.6.13 + rm -rf /var/tmp/kernel-2.6.13-0.3.rdt-root + mkdir -p /var/tmp/kernel-2.6.13-0.3.rdt-root/boot + BuildKernel + '[' -n '' ']' + Config=kernel-2.6.13-i686.ccrma.config + DevelDir=/usr/src/kernels/2.6.13-0.3.rdt-i686 + DevelLink= + KernelVer=2.6.13-0.3.rdt + echo BUILDING A KERNEL FOR i686... BUILDING A KERNEL FOR i686... + perl -p -i -e 's/^EXTRAVERSION.*/EXTRAVERSION = -0.3.rdt/' Makefile + make -s mrproper + cp configs/kernel-2.6.13-i686.ccrma.config .config ++ head -1 .config ++ cut -b 3- + Arch=i386 + echo USING ARCH=i386 USING ARCH=i386 + make -s ARCH=i386 nonint_oldconfig + make -s ARCH=i386 include/linux/version.h CHK include/linux/version.h UPD include/linux/version.h + make -s ARCH=i386 -j3 bzImage CHK include/linux/version.h SYMLINK include/asm -> include/asm-i386 SPLIT include/linux/autoconf.h -> include/config/* In file included from ./include/asm/system.h:5, from ./include/asm/processor.h:18, from ./include/asm/thread_info.h:17, from ./include/linux/thread_info.h:21, from ./include/linux/preempt.h:11, from ./include/linux/spinlock.h:9, from ./include/linux/capability.h:45, from ./include/linux/sched.h:7, from arch/i386/kernel/asm-offsets.c:7: ./include/linux/kernel.h:10:20: stdarg.h: No such file or directory In file included from ./include/asm/system.h:5, from ./include/asm/processor.h:18, from ./include/asm/thread_info.h:17, from ./include/linux/thread_info.h:21, from ./include/linux/preempt.h:11, from ./include/linux/spinlock.h:9, from ./include/linux/capability.h:45, from ./include/linux/sched.h:7, from arch/i386/kernel/asm-offsets.c:7: ./include/linux/kernel.h:102: error: syntax error before "va_list" ./include/linux/kernel.h:106: error: syntax error before "va_list" ./include/linux/kernel.h:110: error: syntax error before "va_list" ./include/linux/kernel.h:115: error: syntax error before "va_list" ./include/linux/kernel.h:127: error: syntax error before "va_list" make[1]: *** [arch/i386/kernel/asm-offsets.s] Error 1 make: *** [arch/i386/kernel/asm-offsets.s] Error 2 error: Bad exit status from /var/tmp/rpm-tmp.41487 (%build) RPM build errors: user machbuild does not exist - using root group machbuild does not exist - using root user machbuild does not exist - using root group machbuild does not exist - using root user machbuild does not exist - using root group machbuild does not exist - using root user machbuild does not exist - using root group machbuild does not exist - using root user machbuild does not exist - using root group machbuild does not exist - using root user machbuild does not exist - using root group machbuild does not exist - using root user machbuild does not exist - using root group machbuild does not exist - using root user machbuild does not exist - using root group machbuild does not exist - using root user machbuild does not exist - using root group machbuild does not exist - using root user machbuild does not exist - using root group machbuild does not exist - using root user machbuild does not exist - using root group machbuild does not exist - using root user machbuild does not exist - using root group machbuild does not exist - using root user machbuild does not exist - using root group machbuild does not exist - using root user machbuild does not exist - using root group machbuild does not exist - using root user machbuild does not exist - using root group machbuild does not exist - using root user machbuild does not exist - using root group machbuild does not exist - using root user machbuild does not exist - using root group machbuild does not exist - using root user machbuild does not exist - using root group machbuild does not exist - using root user machbuild does not exist - using root group machbuild does not exist - using root Bad exit status from /var/tmp/rpm-tmp.41487 (%build)

1 0

current kernel 2.6.14.X
by Jerry Geis 27 Dec '05

27 Dec '05

Is there a location for centos 4.2 that has a current kernel compiled and ready to just install for the 2.6.14.X kernel? I am wondering if a current kernel helps with my slowww compaq r4000 amd64 machine. Thanks, Jerry

2 1

Re: sata centos 4.2
by mw 27 Dec '05

27 Dec '05

> > >>I have one SATA drive with windows xp installed. >>I added a second SATA drive to install CentOS on. During the install, >>both drives are listed. If I use the auto-partition feature and deselect >>the drive with windows on it, only selecting the new drive, I get an >>error message that it could not create the partitions. The same thing >>happened a few months ago and I manually setup to partitions. This >>worked, but windows wouldn't boot any longer. The last time I tried this >>was with CentOS 4.0. I'm reluctant to mess up the windows install and >>want to dual boot. Searching the web brought up alot of info, but I'm >>still confused as to whether this should work. >>I'm using an Abit AN8 motherboard with no ATA hard drives, but an ATA >>cdrom drive (used for the install). >>Any feedback is greatly appreciated. >>Thanks. >>mark >>markworkman(a)woh.rr.com >>ps. I do have a 3ware SATA card I could put in if that would make things >>easier. >> >> > >Your computer has one Master Boot Record on the boot drive (that is the >Primary Master drive, the one that you currently have Windows on). > >You will need to manually setup the partitions on the second drive. > >When you get finished, CentOS will be installed on the second drive ... >but the boot loader (grub) will be installed on the MBR of the boot >drive. > >As part of the setup, windows should be listed as a boot option ... if >you use the arrow key on the Grub selection screen: > >http://shots.osdir.com/slideshows/slideshow.php?release=272&slide=20 > >If windows is not listed, login to centos and edit >your /boot/grub/grub.conf file and add this entry to the bottom of the >file: > >#---start below here---# >title Windows > rootnoverify (hd0,0) > chainloader +1 >#---stop above here---# > >If you add those 3 lines, you should see "Windows" as an option on the >grub selection screen. > >If you want to see all the options every boot up, in that same file >(/etc/grub/grub.conf), you should remark out (put a # in front of) the >line that says: > >hiddenmenu > >so it looks like this: > >#hiddenmenu > Thanks for your help. This worked as you said that it would.

1 0

OT: Evolution folder location
by Robert Moskowitz 27 Dec '05

27 Dec '05

I have used Eudora since v 1.35 (circa '93). For quite some time, I have enjoyed keeping each of my mail accounts' folders in totally separate directory trees. In Eudora you do this by specifying the data locatoin as part of the startup: '<program location>/eudora.exe <data location>' So I am quite spoiled. But there is no Eudora support in Linux/CentOS. So where are Evolution folders kept? And Can I do something to have each account in a separate directory structure. Oh, some more about Eudora, since perhaps v4: If you run multiple personalities in a copy of Eudora, all that mail is in a single directory structure, though you CAN have filters to drop mail into different folders. To have multple directory structures, you run multiple copies of Eudora.

2 3

subscription alert box
by Jerry Geis 26 Dec '05

26 Dec '05

I am continually getting the subscription alert panel popping up??? I leave the selection on the default which is to activate and say OK. It asks me for the root password - I enter it. It keeps coming back... I have network connectivity for the laptop. Any ideas? I saw nothing in /var/log/messages. Thanks, Jerry

2 1

Centos 4.1 to 4.2 caveats?
by Joe Polk 26 Dec '05

26 Dec '05

Are there any caveats to yum upgrade from 4.1 to 4.2? And can someone tell me if perl-5.8.6 is in 4.2? <<JAV>>

5 5

More YUM and logwatch
by Robert 26 Dec '05

26 Dec '05

I looked in the Fedora list archives and found several references to logwatch not working right in FC3. (FC1 & FC2 were O.K.) This post is definitive: http://marc.theaimsgroup.com/?l=fedora-list&m=111294403802213&w=2

1 0

Anyone know of a good open-source PHP accellerator that works with CentOS 64-bit?
by Ron Jones 26 Dec '05

26 Dec '05

Can you recommend a PHP accellerator that works with my CentOS 4.2 64-bit version? If it's possible, I'd like to find one that is actively updated. Thanks, Ron Jones Alpharetta, GA

2 1

3ware RAID controller scripts
by Bob Lewkowitz 26 Dec '05

26 Dec '05

Hello list, I see through the archives that some people here use 3ware RAID controllers with Centos. I have picked up two 9500S-4LP controllers for future servers. I was hoping that if some people could please share their 3ware monitoring scripts with the rest of the group. What I am really hoping to do is have some setup where a cron job runs scripts to test each of the drives connected to the controller to make sure they are not going to break any time soon and then check the health of the array itself. I am used to using smartd for basic SCSI and IDE drives but not connected to this adapter. Any good souls out there want to spread the knowledge? thx, Bob

5 5

CentOS mailserver and spam filter setup ideas & preferences
by Robert 26 Dec '05

26 Dec '05

greetings, yes, Mr. Richey it was funny what everyone posted... we all need that from time to time eh? ummm on the work side... i have been trying to search on how to block alternative language spam (spanish or otherwise) and am coming up fairly blank except for Bayesian filtering... i will probably be using the www.qmailrocks.org system again yet i am interested in what others have done and are doing please... i used sendmail for years so any hints from that side would be appreciate too please? plus if someone tell me what i should be putting in my google search for trying to find alternative ways to filter spanish or other language spam please? i am almost drawing a blank! thanks in advance - rh -- Robert Hanson - Abba Communications Computer & Internet Services (509) 624-7159 - www.abbacomm.net

9 11

need kernel 2.6.10 on Centos 4.2 switch to Fedora or compile kernel from source ?
by Vikas 26 Dec '05

26 Dec '05

Currently I have 2.6.9-22.0.1.EL but i need 2.6.10 or higher, since: 1. I need ipt_CONNMARK 2. The servers are throwing kernel panicks on 2.6.9 and they worked fine when they were running fedora core 3 with the kernel 2.6.10-1.760 So my question is: Do i switch the servers back to fedora. Or do I compile the kernel from source. Or is there a 3rd way out. Merry christmas and happy holidays :) S

4 4

ATRpms repo question...
by Jose Alburquerque 25 Dec '05

25 Dec '05

Hi. I'm fairly new with CentOS but have been using version 4.2 with great satisfaction (Thank you!). I've been using repos such as Dag and Dries successfully to keep my packages up to date. (I've seen many posts which allow me to believe that these repos won't change CentOS compatibility to RHEL4 or to migrate it another distro for that matter!) My question applies to the ATRpms repo (which has el4 rpms). Can I safely use this repo to "yum update" my system? When I added the repo to the yum repos (and to the up2date repos as well), I noticed more than 100 packages to be updated (some seem to be system packages like alsa-lib, autoconf, glib2, etc.) Can I update with this repo and maintain same basic system and functionality? Thanks for your answers. Sincerely Jose

2 2

CentOS-announce Digest, Vol 10, Issue 11
by centos-announce-request＠centos.org 25 Dec '05

25 Dec '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA:2005-1224-1 CentOS 4 i386 dbh - bugfix update (Extras Only) (Johnny Hughes) 2. CEBA:2005-1224-1 CentOS 4 x86_64 dbh - bugfix update (Extras Only) (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Sat, 24 Dec 2005 09:54:03 -0600 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA:2005-1224-1 CentOS 4 i386 dbh - bugfix update (Extras Only) To: CentOS-Announce <centos-announce(a)centos.org> Message-ID: <1135439643.24389.136.camel(a)myth.home.local> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Bugfix Advisory 2005:1224-1 CentOS 4 i386 dbh - Bugfix Update (Extras Only) This CEBA is for the Extras repository only, and not for the main CentOS repository. ------------------- The following upstream changes have been rolled into dbh: * Thu Dec 22 2005 Kevin Fenzi <kevin(a)tummy.com> - 1:1.0.24-3.fc4 - Bump release to fix tagging issue * Thu Dec 22 2005 Kevin Fenzi <kevin(a)tummy.com> - 1:1.0.24-2.fc4 - Remove hard coded dist tag (fixes bug 176471) - Remove zero length TODO and NEWS files - Remove static libs - Remove .la files ------------------- The following files are updated and syncing to the mirrors: i386: dbh-1.0.24-3.c4.i386.rpm dbh-devel-1.0.24-3.c4.i386.rpm src: dbh-1.0.24-3.c4.x86_64.rpm

1 0

yum-utils and yum-utils-plugins
by Johnny Hughes 25 Dec '05

25 Dec '05

All, We are currently testing the yum-utils and yum-utils-plugins in the dev.centos.org repository. The two main plugins that this allows that I think would be great for normal users are protectbase and fastestmirror. See the announcement on the centos-devel list for details: http://lists.centos.org/pipermail/centos-devel/2005-November/000947.html Thanks, Johnny Hughes

3 6

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss