- Discuss - lists.centos.org

question on cut
by Jerry Geis 02 Sep '05

02 Sep '05

when I do the the cut -d "." -f 2- I get 2 fields. If my file was /home/silentm/log/file.machine.log I get machine.log not just "log" the suffix?? Jerry

1 0

Re: [CentOS] question on cut
by Jeff Stacey 02 Sep '05

02 Sep '05

with /home/silentm/log/file.machine.log you would need to use echo /home/silentm/log/file.machine.log | cut -d . -f3 echo /home/silentm/log/file.machine.log | cut -d . -f1 *-> /home/silentm/log/file echo /home/silentm/log/file.machine.log | cut -d . -f2 *-> machine echo /home/silentm/log/file.machine.log | cut -d . -f3 *-> log HTH - Jeff >>> geisj(a)pagestation.com 9/2/2005 9:00 AM >>> I am trying to use cut to tell me the suffix of a file. for example: echo /home/silentm/log/file.machine.log | cut -d . -f 1- I was expecting to get .log or log but I get the entire string echoed back. doing the opposite gave me what I expected: echo /home/silentm/log/file.machine.log | cut -d . -f 1 gives me /home/silentm/log/file I am trying to find a way to test if the file ends in .log? How might I do that. Thanks, Jerry _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

system reboots after shutdown
by User Lists 02 Sep '05

02 Sep '05

Hi all, When i want to shutdown my laptop (the result is the same from command line as from gdm), screen gets blank, but computer restarts. APM is disabled (this laptop doesn't support it), and disabling ACPI is no solution, because it controls the fan. Kernel version is 2.6.9-11.EL and CPU is Pentium Centrino. Laptop is an AIRIS 840. I use different distros (ubuntu, debian and knoppix) to reproduce this problem without a result. How can I solve this problem?. Thank you for your help. __________________________________________________ Correo Yahoo! Espacio para todos tus mensajes, antivirus y antispam ¡gratis! Regístrate ya - http://correo.espanol.yahoo.com/

3 4

Building bacula RPM from Karanbir's repo
by Kanwar Ranbir Sandhu 02 Sep '05

02 Sep '05

Hi all, Has anyone tried to rebuild bacula from the source RPM provided on Karanbir's CentOS yum repo? Every time I give it a go, I'm given this error during the configure stage: checking host system type... configure: error: can not guess host type; you must specify one make[1]: Entering directory `/home/rpmbuilder/rpmbuild/BUILD/depkgs/mtx-1.2.17kes' make[1]: *** No targets specified and no makefile found. Stop. make[1]: Leaving directory `/home/rpmbuilder/rpmbuild/BUILD/depkgs/mtx-1.2.17kes' make: *** [mtx] Error 2 error: Bad exit status from /home/rpmbuilder/rpmbuild/tmp/rpm-tmp.1839 (%build) I've tried specifying the host type in the spec file itself by entering the following: --host=x86_64-centos-linux-gnu and --host=x86_64-redhat-linux-gnu but neither have worked. This is my first go at building bacula, so I'm pretty sure I'm missing something: I just don't know what. Do I need to enter a macro in my .rpmmacros file? Currently: %_topdir %(echo "$HOME")/rpmbuild %_tmppath %{_topdir}/tmp Is the spec file hosed? Something else entirely? Any help would be appreciated. Thanks, Ranbir -- Kanwar Ranbir Sandhu Systems Aligned Inc. www.systemsaligned.com

2 3

GUI Server settings not present
by Todd Cary 01 Sep '05

01 Sep '05

I have installed the minimum and used yum and groupinstall to install "System Tools" "Web Server" yet the GUI Server Settings does not contain the Web server or Samba (Samba was installed with "yum install samba"); it just contains Services. Have I missed something here? Todd -- Ariste Software 200 D Street Ext Petaluma, CA 94952 (707) 773-4523

2 3

[OT] 3Ware 9.2.1.1 firmware for 9000 series released
by Kirk Bocek 01 Sep '05

01 Sep '05

Here are the version numbers I get after installing the 9.2.1.1 release: Model 9500S-4LP Firmware FE9X 2.08.00.003 Driver 2.26.03.019fw BIOS BE9X 2.03.01.052 Boot Loader BL9X 2.02.00.001 A bit confusing. I thought I saw a map of code set releases to various version numbers but I couldn't find it on 3Ware's site. On Sun, 28 Aug 2005 at 9:20am, Bryan J. Smith wrote > Claims to have fixed the write performance issues with > multiple volumes. Haven't tried it personally (I do not have > a 9500S card, and I have only installed one once for a > client). > > NOTE: This (9.2.1.1) is an actual, formal, supported release > -- not an unsupported engineering release.

5 6

Can't mount FAT32 partition
by Dave Gutteridge 01 Sep '05

01 Sep '05

I am trying to mount a FAT32 partition in CentOS. I'm following the instructions on this page: http://www.linuxforum.com/linux_tutorials/14/1.php This is the line I put into /etc/fstab /dev/hda /mnt/windows vfat users,owner,rw,umask=000 0 0 And this is the error I get: [root@localhost mnt]# mount -a mount: wrong fs type, bad option, bad superblock on /dev/hda, or too many mounted file systems What is the cause of this error? For reference, this is the output of fsisk: [root@localhost mnt]# fdisk -l Disk /dev/hda: 30.0 GB, 30020272128 bytes 255 heads, 63 sectors/track, 3649 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 3649 29310561 c W95 FAT32 (LBA) Disk /dev/hdb: 30.7 GB, 30738677760 bytes 255 heads, 63 sectors/track, 3737 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hdb1 * 1 3644 29270398+ 83 Linux /dev/hdb2 3645 3737 747022+ f W95 Ext'd (LBA) Dave

14 36

[OT] DNS - asking for your opinion
by Simone 01 Sep '05

01 Sep '05

Hi list, I first apologise because this is really off topic, but I would really appreciate your opinion on this. I have had a very hard time configuring a DNS server to answer reverse dns queries, and I would like to have your opinion on my provider behaviour. We have 3 classless subnets and asked the provider to delegate reverse dns. They configured their server and emailed me all was fine but i it didn't work for one subnet, so I mailed back and they assure their side was all perfectly configured. I finally find out (spending lot of time and thanks to www.dnsstuff.com) that they configured 2 zones like 128/27.x.x.x.in-addr.arpa and one as 128-27.x.x.x.in-addr.arpa, so my server was not able to answer queries because I had all zones 128/27.x.x.x.in-addr.arpa. As said before it is my first time configuring Bind and I am sure the more experienced would have notice and solved it quite soon, but still I wonder why to use different convention (without telling us) and even if this is correct (red the http://rfc.net/rfc2317.html and they always use "/" not "-" ). Hope I won't be banned from the list for this email...... Thanks for your time reading this Simone

2 1

Show ShutDown steps
by BRUCE STANLEY 01 Sep '05

01 Sep '05

Is there a way to make Centos 4.1 show you the shutdown steps it is executing without having to hit a key on the keyboard (such as in Fedora Core 2 or Red Hat 9)?

2 2

My CentOs 4.1 desktop starts to freez ( non-responsive) with 100% cpu usage
by mohamed yusuf 01 Sep '05

01 Sep '05

It starts to become a non-responsive from time to time with 100% cpu usage eventhough there is no applications running except a browser. I have been running centos 4 for the past 6 months without any problem with regular update. Now, I have to reboot whenever it shows signs of a non-response. It starts to exhibit this behaviour a cople of days ago. I could not figure it out the reason and need help. Is there any tools to troubleshoot this ? I have tried top, system monitor.. I have attache screen shoot of system monitor if it helps. Mohamed Yusuf __________________________________________________________ Find your next car at http://autos.yahoo.ca

13 21

'Many' packages installed - CentOS 4.1
by Tom Brown 01 Sep '05

01 Sep '05

Hi Installed my first CentOS box last night after coming from Whitebox - This is perhaps me being stupid but on install i opted for 'Custom' install as i prefer minimal and then build as i suit. I went through the list of things to install and removed everything apart from networking. Install happenned and tons of stull ended up being installed including X openoffice and the like - Why was that when i de-selected everything apart from networking? It was very much bloatware and not what i want on a server. thanks for any hints

12 18

CentOS-announce Digest, Vol 7, Issue 1
by centos-announce-request＠centos.org 01 Sep '05

01 Sep '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2005:0831-001 Important CentOS 4 i386 php - security update (CENTOSPLUS only) (Johnny Hughes) 2. CESA-2005:0831-001 Important CentOS 4 x86_64 php - security update (CENTOSPLUS only) (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 31 Aug 2005 16:06:57 -0500 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2005:0831-001 Important CentOS 4 i386 php - security update (CENTOSPLUS only) To: CentOS-Announce <centos-announce(a)centos.org> Message-ID: <1125522417.10751.37.camel(a)myth.home.local> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2005:0831-001 Important CentOS 4 i386 php - security update This CESA is for the version of php is that is included in the centosplus repo for CentOS-4 ... this is not an update to the main CentOS-4 repo. ---------------- Name : php Relocations: (not relocatable) Version : 5.0.4 Vendor: CentOS Release : 3.centos4 Build Date: 31 Aug 2005 12:15:26 AM UTC Install Date: (not installed) Build Host: C4i386-build Group : Development/Languages Source RPM: php-5.0.4-3.centos4.src.rpm License: The PHP License Packager : Johnny Hughes <johnny(a)centos.org> URL : http://www.php.net/ Summary : The PHP HTML-embedded scripting language. (PHP: Hypertext Preprocessor) Description : PHP is an HTML-embedded scripting language. PHP attempts to make it easy for developers to write dynamically generated webpages. PHP also offers built-in database integration for several commercial and non-commercial database management systems, so writing a database-enabled webpage with PHP is fairly simple. The most common use of PHP coding is probably as a replacement for CGI scripts. The mod_php module enables the Apache Web server to understand and process the embedded PHP language in Web pages. ---------------- Update Information: This update is considered important by the CentOS Development Team. A bug was discovered in the PEAR XML-RPC Server package included in PHP. If a PHP script is used which implements an XML-RPC Server using the PEAR XML-RPC package, then it is possible for a remote attacker to construct an XML-RPC request which can cause PHP to execute arbitrary PHP commands as the 'apache' user. The Common Vulnerabilities and Exposures project (cve.mitre.org) has assigned the name CAN-2005-2498 to this issue. All Users of PHP-5 from the CentOSPlus Repo should upgrade to these updated packages. More info is available at: http://rhn.redhat.com/errata/RHSA-2005-748.html https://www.redhat.com/archives/fedora-announce-list/2005-August/msg00118.h… ------------------------ The following updated files have been uploaded and are currently syncing to the mirrors: i386: php-5.0.4-3.centos4.i386.rpm php-bcmath-5.0.4-3.centos4.i386.rpm php-dba-5.0.4-3.centos4.i386.rpm php-devel-5.0.4-3.centos4.i386.rpm php-gd-5.0.4-3.centos4.i386.rpm php-imap-5.0.4-3.centos4.i386.rpm php-ldap-5.0.4-3.centos4.i386.rpm php-mbstring-5.0.4-3.centos4.i386.rpm php-mysql-5.0.4-3.centos4.i386.rpm php-ncurses-5.0.4-3.centos4.i386.rpm php-odbc-5.0.4-3.centos4.i386.rpm php-pear-5.0.4-3.centos4.i386.rpm php-pgsql-5.0.4-3.centos4.i386.rpm php-snmp-5.0.4-3.centos4.i386.rpm php-soap-5.0.4-3.centos4.i386.rpm php-xml-5.0.4-3.centos4.i386.rpm php-xmlrpc-5.0.4-3.centos4.i386.rpm src: php-5.0.4-3.centos4.src.rpm

1 0

Mod_auth_mysql
by Thomas E Dukes 01 Sep '05

01 Sep '05

Hello, I just upgraded from WBEL 4 to Centos 4.1 per the FAQ. I'm pretty sure after running 'yum update', mysql and apache were updated. I was previously using mod_auth_mysql under WBEL 4 to password protect several directories but now things seem to be broken. When I go to a password protected directory I get an Internal Server Error 500. The only explanation in the error log is "no user file?" Any ideas? TIA

4 8

Re: [CentOS] Trying to control the torrent of spam...
by Kirk Bocek 31 Aug '05

31 Aug '05

> On Sun, 2005-08-28 at 11:01, Preston Crawford wrote: > If you were running your own MTA I would recommend you implement > greylisting. This would eliminate >98% of spam with little or nor > impact to your MTA servers resources. On my CentOS 3.5 sendmail server I simply added: FEATURE(`blacklist_recipients')dnl dnl # dnl # dnsbl - DNS based Blackhole List/Black List/Rejection list dnl # See http://www.sendmail.org/m4/features.html#dnsbl dnl # FEATURE(`dnsbl', `bl.spamcop.net', `"Spam blocked see: http://spamcop.net/bl.shtml?"$&{client_addr}')dnl FEATURE(`dnsbl', `relays.ordb.org', `"Spam blocked see: http://ordb.org/lookup/?host="$&{client_addr}')dnl FEATURE(`dnsbl', `cbl.abuseat.org', `"Spam blocked see: http://cbl.abuseat.org/lookup.cgi?ip="$&{client_addr}')dnl FEATURE(`dnsbl', `sbl.spamhaus.org', `"Spam blocked see: http://spamhaus.org/query/bl?ip="$&{client_addr}')dnl FEATURE(`dnsbl', `list.dsbl.org', `"Spam blocked see: http://dsbl.org/listing?"$&{client_addr}')dnl to my sendmail.mc file. I'm sure it will work in CentOS 4. I forget where I found the instructions for blacklisting. This has dramatically reduced the spam on my server. Kirk Bocek

1 0

Via 4610 RAID chipset on ASUS P4P800 under CentOS 4.1
by Solar Canine 31 Aug '05

31 Aug '05

Has anyone had any success getting this chipset's ATA RAID controller to appear under CentOS 4.1? If so, can they break it down for me in easy to understand steps?

1 0

SELinux
by Craig White 31 Aug '05

31 Aug '05

I'm probably dense - CentOS 4.1 # cat /etc/sysconfig/selinux ..snip... SELINUXTYPE=targeted # su - Alec # tail -n 3 /var/log/messages Aug 31 08:48:26 srv1 su(pam_unix)[31435]: session opened for user Alec by root(uid=0) Aug 31 08:48:26 srv1 su[31435]: Warning! Could not relabel /dev/pts/0 with user_u:object_r:devpts_t, not relabeling.Operation not permitted Aug 31 08:48:27 srv1 su(pam_unix)[31435]: session closed for user Alec restorecon -v /dev/pts/0 or restorecon -R /dev/pts don't help My interest is actually trying to remotely run a vnc session to a different computer. I connect to it via ssh # ssh -XC -p XXXX root@fqdn and then run vncviewer # vncviewer 192.168.1.253:0 VNC viewer for X version 4.0 - built Feb 21 2005 15:39:30 Copyright (C) 2002-2004 RealVNC Ltd. See http://www.realvnc.com for information on VNC. vncviewer: unable to open display "" so I was thinking I would try to set up vncserver as the user on that machine but unable to su to a shell for that user means I can't run vncpassword for that user. ;-( Anyone want to toss me a bone on any of these issues (I have been reading SELinux notes at Fedora 3 Craig

1 1

iptables help request
by James Pifer 31 Aug '05

31 Aug '05

I have a server running on CentOS that sits being another firewall. I want to forward a certain ports to another server, but only for a handful of addresses. Can anyone assist with an example rule of this? For example, let's say I wanted requests from 24.83.77.24 and 63.47.50.16 on port 10001 to forward to internal server 192.168.1.15 All other requests for THAT port would be rejected or dropped. Anyone willing to give me an example rule that would allow this to be forwarded? I appreciate any help. Thanks, James

2 1

Tux on Centos 4.x x86_64
by Alan Hodgson 31 Aug '05

31 Aug '05

Is anyone successfully running Tux on Centos 4.1 x86_64? If so, what version? Thanks in advance for any info. -- In a world where the citizens of most developed nations have half their incomes wrested from them by the state (slaves only paid about a quarter, effectively), how widely supported do you think the idea of "freedom" really is?

2 2

mnt usb hard drive
by Filianx 31 Aug '05

31 Aug '05

Hi all, can anyone tell me how to mount my usb hdd, all other usb peripherals get picked up ok cheers in advance -- Filianx

4 6

CentOS-announce Digest, Vol 6, Issue 15
by centos-announce-request＠centos.org 31 Aug '05

31 Aug '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2005:267 Important CentOS 3 s390(x) Evolution - security update (Pasi Pirhonen) 2. CESA-2005:267 Important CentOS 4 s390(x) Evolution - security update (Pasi Pirhonen) 3. CESA-2005:267 Important CentOS 3 x86_64 Evolution - security update (seth vidal) 4. CESA-2005:267 Important CentOS 3 i386 Evolution - security update (seth vidal) ---------------------------------------------------------------------- Message: 1 Date: Tue, 30 Aug 2005 18:25:47 +0300 From: Pasi Pirhonen <upi(a)papat.org> Subject: [CentOS-announce] CESA-2005:267 Important CentOS 3 s390(x) Evolution - security update To: centos-announce(a)centos.org Message-ID: <20050830152547.GC22588(a)core.upi.iki.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2005:267 https://rhn.redhat.com/errata/RHSA-2005-267.html The following updated files have been uploaded and are currently syncing to the mirrors: s390: updates/s390/RPMS/evolution-1.4.5-16.s390.rpm updates/s390/RPMS/evolution-devel-1.4.5-16.s390.rpm s390x: updates/s390x/RPMS/evolution-1.4.5-16.s390x.rpm updates/s390x/RPMS/evolution-devel-1.4.5-16.s390x.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://iki.fi/upi/

1 0

USB DIsk and mount point
by Jesús García González 30 Aug '05

30 Aug '05

Hello. I use Centos 4.1 When I inserted my usb 2.0 disk for the first time it created the mount point /media/usbdisk just fine. Which I used to mount the disk. But as soon as I used it in another computer (winxp) when I took the usb back to centos the mount point had become /media/IOMEGA (yeah it's an iomega driver) but then as time goes by, the mount point every time the disk is used else where the mount point changes from /media/___________ to whatever other garble you can think of.... Now Executing a mount /media/_what_ever_is_today_ will mount the usb disk just fine without any problems. Why does the mount point changes so erratically??? J.

2 1

USB Disk
by James Pifer 30 Aug '05

30 Aug '05

I put a new server together with CentOS 4. This server is doing a number of functions including ntp, mail, and web server. I had a USB drive plugged in and it was working great. I could access it at /media/usbdisk and I copied lots of data to it. I felt the server was "complete" so I wanted to move it. I shut it down, moved it, etc. Everything is ok, except that I cannot access the usbdisk now. If I plug it into my laptop (FC4) I can access it without any problems. When I plug it into the server I get: Aug 30 15:47:22 porky kernel: ohci_hcd 0000:00:0f.2: wakeup Aug 30 15:47:22 porky kernel: usb 1-2: new full speed USB device using address 3 Aug 30 15:47:22 porky kernel: scsi3 : SCSI emulation for USB Mass Storage devices Aug 30 15:47:22 porky kernel: Vendor: WDC WD16 Model: 00JB-00GVA0 Rev: 0 0 Aug 30 15:47:22 porky kernel: Type: Direct-Access ANSI SCSI revision: 02 Aug 30 15:47:22 porky kernel: SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) Aug 30 15:47:22 porky kernel: sdb: assuming drive cache: write through Aug 30 15:47:22 porky kernel: sdb: sdb1 Aug 30 15:47:22 porky kernel: Attached scsi disk sdb at scsi3, channel 0, id 0, lun 0 Aug 30 15:47:22 porky kernel: Attached scsi generic sg3 at scsi3, channel 0, id 0, lun 0, type 0 Aug 30 15:47:22 porky scsi.agent[9209]: disk at /devices/pci0000:00/0000:00:0f.2/usb1/1-2/1-2:1.0/host3/target3:0:0/3:0:0:0 Aug 30 15:47:23 porky fstab-sync[9282]: added mount point /media/usbdisk for /dev/sdb1 Problem is when I go to /media/usbdisk there's nothing there. Anyone have any suggestions? Thanks, James

4 4

server install and software config advise please
by Robert Hanson 30 Aug '05

30 Aug '05

Greetings I did another quick server install on an old rackmount Compaq Proliant 1850R with hardware RAID5 today. would someone please shed some of their experience and light on how they deal with deleting or keeping the default configs on these items please when i do a chkconfig --list | grep :on | more nfslock 0:off 1:off 2:off 3:on 4:on 5:on 6:off readahead 0:off 1:off 2:off 3:off 4:off 5:on 6:off portmap 0:off 1:off 2:off 3:on 4:on 5:on 6:off rawdevices 0:off 1:off 2:off 3:on 4:on 5:on 6:off rpcsvcgssd 0:off 1:off 2:off 3:on 4:on 5:on 6:off irqbalance 0:off 1:off 2:off 3:on 4:on 5:on 6:off lm_sensors 0:off 1:off 2:on 3:on 4:on 5:on 6:off messagebus 0:off 1:off 2:off 3:on 4:on 5:on 6:off netfs 0:off 1:off 2:off 3:on 4:on 5:on 6:off microcode_ctl 0:off 1:off 2:on 3:on 4:on 5:on 6:off mdmonitor 0:off 1:off 2:on 3:on 4:on 5:on 6:off autofs 0:off 1:off 2:off 3:on 4:on 5:on 6:off rpcgssd 0:off 1:off 2:off 3:on 4:on 5:on 6:off readahead_early 0:off 1:off 2:off 3:off 4:off 5:on 6:off rpcidmapd 0:off 1:off 2:off 3:on 4:on 5:on 6:off arptables_jf 0:off 1:off 2:on 3:on 4:on 5:on 6:off cpuspeed 0:off 1:on 2:on 3:on 4:on 5:on 6:off i did snip some out as i choose to keep them... i can obviously dust all the rpc**** stuff and portmap for now correct??? can anyone please comment on the rest of these please? i mean, what is some of this unrecognizable stuff??... at least for me eh? this is a straight dns server with all ext3 and a swap and is running bind, vsftpd, sshd, and smtp and that is about it. ive done enough research and searching to be more dangerous than good on these..........and even though i have been involved in this for a long time, i would rather be safe than sorry with the newer opsys versions. thanks in advance! - rh - rh -- Robert Hanson Abba Communications http://www.abbacomm.net

5 7

install on a Dell4400 perc2 /DC
by peter v richards 30 Aug '05

30 Aug '05

I got fedora core 4 to install and show me the configured Raid drives. no mean trick let me tell you. However, the platform is unstable and hangs. I tried Centos 4.1 but the raid drives are not identified like most other distros. can i do anything from the fedora install that might allow me to install the centos distro. I would rather not have to go out and buy a new raid card. peter richards

3 2

CentOS-announce Digest, Vol 6, Issue 14
by centos-announce-request＠centos.org 30 Aug '05

30 Aug '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2005:267 Important CentOS 4 ia64 Evolution - security update (Pasi Pirhonen) 2. CESA-2005:267 Important CentOS 3 ia64 Evolution - security update (Pasi Pirhonen) 3. CESA-2005:267 Important CentOS 4 i386 Evolution - security update (Johnny Hughes) 4. CESA-2005:267 Important CentOS 4 x86_64 Evolution - security update (Johnny Hughes) 5. Re: CESA-2005:267 Important CentOS 4 x86_64 Evolution - security update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 29 Aug 2005 22:46:26 +0300 From: Pasi Pirhonen <upi(a)papat.org> Subject: [CentOS-announce] CESA-2005:267 Important CentOS 4 ia64 Evolution - security update To: centos-announce(a)centos.org Message-ID: <20050829194626.GA22588(a)core.upi.iki.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2005:267 https://rhn.redhat.com/errata/RHSA-2005-267.html The following updated files have been uploaded and are currently syncing to the mirrors: files: updates/ia64/RPMS/evolution-2.0.2-16.3.ia64.rpm updates/ia64/RPMS/evolution-devel-2.0.2-16.3.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://iki.fi/upi/

1 0

pop before smtp
by Mark Quitoriano 30 Aug '05

30 Aug '05

Hi! Im using postfix+postfixadmin+mysql+courier-imap i just implemented pop-before-smtp[1], my problem is after recieving the mails i connect to the server using telnet and try to send spam using the mail server it did send it didn't ask for authentication anymore. i'm not sure how this pop-before-smtp really works but i was thinking how should i secure the server in this kind of attacks. [1]http://www.stahl.bau.tu- bs.de/~hildeb/postfix/postfix_pop-before-smtp_en.shtml<http://bs.de/~hildeb/postfix/postfix_pop-before-smtp_en.shtml> -- Regards, Mark Quitoriano, CCNA http://www.atamanetworks.com Fan the flame... http://www.spreadfirefox.com/?q=user/register&r=19441

10 18

yum custom install
by Todd Cary 29 Aug '05

29 Aug '05

I am trying to learn some of the in's and out's of yum, and thanks to the help of many on this forum, things are beginning to make more sense (though I still have a lot more to learn). My initial Centos install was the "minimum". From there I used yum grouplist and yum installgroup. However, one of the members helped me with using yum to install php-mysql and I just found on this forum php-gd (which I installed). It appears one "just has to know about these packages" or have I missed something? Once I have an install that I like, can I save off the list of packages and use it the next time I do an install? Also, when I do a "yum list", I do not see the php-mysql or the php-gd listed. Am I looking at the incorrect list? Todd -- Ariste Software 200 D Street Ext Petaluma, CA 94952 (707) 773-4523

4 4

Directory server for Centos
by Carlos Arellano 29 Aug '05

29 Aug '05

Any ones knows if Fedora directory Server is available for Centos ia64. or is in progress to be. Or never is gona be available. Or Redhat Directory server? Thanks Este correo fue escaneado y se encuentra libre de virus. Este correo fue escaneado y se encuentra libre de virus.

4 3

Semi-OT: OpenSource DRM server on CentOS?
by dan.trainor 29 Aug '05

29 Aug '05

Hello, all - I understand that this is moderately OT, but hey, since I plan on running it on top of CentOS.... ;) Please bear with me. For our company's internal use of protected media, I have been asked to investigate any and all kinds of OpenSource DRM servers/services. I wouldn't imagine that (if this exists) an OpenSource DRM server daemon would exist on the stock CentOS release, but if such a beast does live, where might I find it? Anyone have any names, or sites that might list something such as this? Anyone have experience in this realm? Thanks! -dant

1 0

bind and bind-chroot
by Robert Hanson 29 Aug '05

29 Aug '05

greetings on a CentOS 4 _server_ install for a dns server rpm -qa | grep bind bind-9.2.4-2 bind-libs-9.2.4-2 bind-chroot-9.2.4-2 bind-utils-9.2.4-2 ypbind-1.17.2-3 rpm -qa | grep name caching-nameserver-7.3-3 ok, so i do this yum remove caching-nameserver and it is gone. now, do i need to leave bind-9.2.4-2 to use the bind-chroot-9.2.4-2 ??? or can i yum remove bind and still have a functional nameserver with only bind-chroot phg on there?? hopefully this makes sense. i was always so used to the old slackware ways of snag what you need, compile, config and go... thanks - rh -- Robert Hanson Abba Communications http://www.abbacomm.net

2 2

RAID5 - MBR and default grub config on CentOS 4
by Robert Hanson 29 Aug '05

29 Aug '05

greetings, i just know i have read several times on this list and in other places that on a RAID5 array that the MBR should be placed on the /boot partition. is this truly correct and if so, why? my experiences of putting the MBR on the /boot partition are contrary to that it will even work and boot that way... comments please? regards, - rh -- Robert Hanson Abba Communications http://www.abbacomm.net

4 14

New User: Kudos, small/old platform, RPM Illegal Instruction
by Bill Maltby 29 Aug '05

29 Aug '05

Hello All! My 1st use of CentOS went well on my later eqpt. Thanks and congrats on a good product. Figured I might as well see if I could use it on some old stuff, still good but obsolete. Picked an AMD 5x86 (equivalent to a Pentium 75 MHz) and decided to see if I could make it my gateway/router. Had some difficulties, not unexpected. Old CD drive couldn't read the CDs. No boot from CD in BIOS. Floppy was broken. Memory is 36 MB. VLB MB, appx. 1 GB old slow drives, etc. Decided to plug HD into another unit and do install there. Went OK, but for some reason, all the junk I tried to turn off still appears to get started. Anyway, my problem is that RPM traps with illegal instruction when a query all, among other combinations, is attempted. It does not do it on my AMD XP, but does do it on the old one. Possible that RPM was compiled with a later arch specified? If so, is there a way to recompile it on my faster machine for execution on the older machine? Or has someone already fixed this and I can download or something? I'm relatively new to this distribution stuff (been doing LFS in the past and many other *IX things before that). I did a search using "rpm illegal instruction" of the lists, but didn't see anything that seemed appropriate. By the way, if the rc.sysinit has the swapon moved up to the front, things work OK. If not, things freeze up as mem is exhausted. Swapon does not appear to be bothered by the fact that LVM is not in control yet. Even if it is, I added another disk, set up two swap areas there and sailed on. Performance counts on a (equiv. to) P75! 8-O If all this works out, I'll try to send some money. Also, *if* I'm able, I will help test what I can. Got an old Aptiva over in the corner too. Hmmm.... am I really a candidate for this org? Maybe not?

2 2

Antivirus logging linux
by Wayne 29 Aug '05

29 Aug '05

Hey Guys, I have a network of windows clients with a couple of linux servers for various tasks. What I would like to do is have some form of antivirus on the clients that will log alerts to something on a linux server and store the info in sql. Anybody have any idea on something that can do this? I tried asking on the securityfocus virus list and I emailed grisoft about their network product. Neither proved fruitful... I want to be able to run my own custom reporting from sql on the fly basically... Any pointers would be _greatly_ appreciated as even googling doesn't appear to be helping me here... Thanks, Wayne

3 5

Can't get the gd library to work
by StarQuake 29 Aug '05

29 Aug '05

I have a system with FC2, with php and gd. I just installed the php package and the gd package and it works fine. I also have a system with CentOS 4.1 and installed the php package and the gd package but when I use phpinfo() I do not see the gd extension. Am I missing something? I somehow feel it has something to do with the config flags Working FC2: '--with-gd' '--enable-gd-native-ttf' Non-working CentOS 4.1: '--with-gd=shared' '--enable-gd-native-ttf' StarQuake -- for some how-to's and rpms visit my site : http://solid.bounceme.net for commercially supported solutions visit : http://www.robas.com

2 2

Previewing oggvorbis files in GNOME...
by Jose Alburquerque 29 Aug '05

29 Aug '05

Hi. I'm wondering if anyone out there can give me a little help trying to figure something out: I presently am running CentOS4.1 with GNOME as my desktop (It runs quite well, I must say!). I just have a little curiosity: I have a few audio files (.wav, .mp3 and .ogg) and I like to "preview" them. When run my mouse over the .wav files (and mp3 files) the "previewing" function works fine, but when I try to preview an oggvorbis file (.ogg) it seems that the file is about to be previewed (because the icon changes), but no sound comes out. I noticed that nautilus (the file-manager) uses sox to play the audio files when previewing. Recently I had to add mp3 support to sox to be able to use "graveman" (a cd burning software) and I figure that's why mp3 previewing works fine for me under GNOME. I thought that the reason that ogg files do not sound is because my version of sox may not have oggvorbis support, but this is not the case because I can play them using the "play" command easily at the command line. Also when I type "sox -h" I get: sox: Version 12.17.7 Usage: [ gopts ] [ fopts ] ifile [ fopts ] ofile [ effect [ effopts ] ] gopts: -e -h -p -v volume -V fopts: -r rate -c channels -s/-u/-U/-A/-a/-i/-g/-f -b/-w/-l/-d -x effect: avg band bandpass bandreject chorus compand copy dcshift deemph earwax echo echos fade filter flanger highp highpass lowp lowpass mask mcompand noiseprof noisered pan phaser pick pitch polyphase rate repeat resample reverb reverse silence speed stat stretch swap synth trim vibro vol effopts: depends on effect Supported file formats: aiff al au auto avr cdr cvs dat vms gsm hcom la lu maud mp3 nul ossdsp prc raw sb sf sl smp sndt sph 8svx sw txw ub ul uw voc vorbis vox wav wve which let's me know that my version of sox has vorbis support. Anyone know why I can't preview my oggvorbis files in GNOME? Thanks a million. -Jose

1 1

Where have all the Gaim icons gone?
by Tim Edwards 28 Aug '05

28 Aug '05

Has anyone noticed that in the latest gaim update (gaim-1.3.1-0.el4.3.i386.rpm) almost all the MSN smiley icons are not included in the package? I've reverted to gaim-1.3.1-0.el4.i386.rpm and they're all there. Is this a bug? and if not why would redhat remove the smiley icons from Gaim? -- Tim Edwards

3 5

CUPS for KDE
by Kai 28 Aug '05

28 Aug '05

CUPS for KDE, my printer does not work properly, it don't print all pages, misses connection with usb, etc. When I installed and configured in GNOME every thing seemed to be fine. When entering KDE it automatically adds two printers and generally brings the printer out of work. I have figured out that I am missing this support according to this link: http://www.linuxprinting.org/kpfeifle/LinuxKongress2002/Tutorial/VII.cups-h… Is this correct? And where can i find this package including those files? kai

3 3

impress viewer for openoffice
by Jerry Geis 28 Aug '05

28 Aug '05

Bryan, THanks for the info. Correct terminology always helps. I need to presentation files others send me. After searching google for staroffice presentation player the viewer was removed in staroffice 5.2. Crazy if you ask me.... So is there an alternative that you are aware for a presentation player? Thanks so much. Jerry [CentOS] impress viewer for openoffice *Bryan J. Smith* b.j.smith at ieee.org <mailto:centos%40centos.org?Subject=%5BCentOS%5D%20impress%20viewer%20for%20…> /Fri Aug 26 16:05:20 UTC 2005/ * Previous message: [CentOS] impress viewer for openoffice <http://lists.centos.org/pipermail/centos/2005-August/010698.html> * Next message: [CentOS] Mount floppy on startup? <http://lists.centos.org/pipermail/centos/2005-August/010701.html> * *Messages sorted by:* [ date ] <http://lists.centos.org/pipermail/centos/2005-August/date.html#10704> [ thread ] <http://lists.centos.org/pipermail/centos/2005-August/thread.html#10704> [ subject ] <http://lists.centos.org/pipermail/centos/2005-August/subject.html#10704> [ author ] <http://lists.centos.org/pipermail/centos/2005-August/author.html#10704> ------------------------------------------------------------------------ Jerry Geis <geisj at pagestation.com <http://lists.centos.org/mailman/listinfo/centos>> wrote: >/ Hi, I am attempting to find an openoffice powerpower />/ point viewer. / <attitude=on> Don't call it that. If you want people to stop calling any presentation "Power Point" start by referring to it as a "Presentation Viewer" or more OpenOffice.org/StarOffice centric, an "Impress Viewer." Some of us were using StarImpress back in the mid-'90s, especially when it was far better than PowerPoint. ;-> </attitude> >/ Also I dont think there is a way from the command line to />/ go fullscreen? not sure. />/ Anyone know of a good power point viewer for centos? / ^^^^^^^^^^^ STOP! I'm serious, this is the problem in the community right now. StarImpress has been around for over a decade, and the generic term is "Presentation" not "Power Point(R)". >/ or a way to make impress startup and go into slideshow />/ mode? / You could actually build a self-contained, self-executing StarImpress slideshow back in StarOffice 5. I used to do it all-the-time. In OpenOffice.org/StarOffice 6+, you can now export a Flash presentation. It works very good, assuming you use fonts that are Flash-friendly.

5 8

Help with kernel crash log file included.
by Jerry Geis 28 Aug '05

28 Aug '05

I had a kernel crash last evening... This is what was in the /var/log/messages file. What should be my next step. I am using an Intel P4 2.4 GHZ, Intel motherboard 865 chipset, 2 software RAID 120GIG disks, 2.6.9-11.ELsmp kernel, and 2 asterisk TDM04B cards. System normally works great through the week, crash was sunday morning at 4:22 am. Thanks, Jerry --------------------------------------------------------- Aug 28 04:02:03 unifiedpaging syslogd 1.4.1: restart. Aug 28 04:02:08 unifiedpaging crond(pam_unix)[13131]: session closed for user root Aug 28 04:22:01 unifiedpaging crond(pam_unix)[13834]: session opened for user root by (uid=0) Aug 28 04:22:33 unifiedpaging kernel: swap_free: Bad swap file entry 80000000 Aug 28 04:22:33 unifiedpaging kernel: swap_free: Bad swap file entry 08000000 Aug 28 04:22:33 unifiedpaging kernel: swap_free: Bad swap file entry 18000001 repeats a bunch of times..... Aug 28 04:22:34 unifiedpaging kernel: swap_free: Bad swap file entry 08000000 Aug 28 04:22:34 unifiedpaging kernel: swap_free: Bad swap file entry 10000001 Aug 28 04:22:34 unifiedpaging kernel: swap_free: Bad swap file entry 80000000 Aug 28 04:22:34 unifiedpaging kernel: swap_free: Unused swap offset entry 00000001 Aug 28 04:22:34 unifiedpaging kernel: swap_free: Bad swap file entry 80000001 Aug 28 04:22:34 unifiedpaging kernel: swap_free: Bad swap file entry 18000000 Aug 28 04:22:34 unifiedpaging kernel: eip: c015137e Aug 28 04:22:34 unifiedpaging kernel: ------------[ cut here ]------------ Aug 28 04:22:34 unifiedpaging kernel: kernel BUG at include/asm/spinlock.h:133! Aug 28 04:22:34 unifiedpaging kernel: invalid operand: 0000 [#1] Aug 28 04:22:34 unifiedpaging kernel: SMP Aug 28 04:22:34 unifiedpaging kernel: Modules linked in: iptable_nat ipt_state ip_conntrack ipt_REJECT iptable_filter ip_tables md5 ipv6 autofs4 sunrpc wcusb(U) wctdm(U) wcfxo(U) wcte11xp(U) wct1xxp(U) wct4xxp(U) tor2(U) zaptel(U) dm_mod button battery ac uhci_hcd hw_random hisax crc_ccitt isdn slhc e1000 3c59x floppy ext3 jbd raid1 ata_piix libata sd_mod scsi_mod Aug 28 04:22:34 unifiedpaging kernel: CPU: 0 Aug 28 04:22:34 unifiedpaging kernel: EIP: 0060:[<c02c5efd>] Not tainted VLI Aug 28 04:22:34 unifiedpaging kernel: EFLAGS: 00010246 (2.6.9-11.ELsmp) Aug 28 04:22:34 unifiedpaging kernel: EIP is at _spin_lock+0x1c/0x34 Aug 28 04:22:34 unifiedpaging kernel: eax: c02d972b ebx: c042cd14 ecx: ecd10e60 edx: c015137e Aug 28 04:22:34 unifiedpaging kernel: esi: c042cd10 edi: 00000007 ebp: 00000000 esp: ecd10e64 Aug 28 04:22:34 unifiedpaging kernel: ds: 007b es: 007b ss: 0068 Aug 28 04:22:34 unifiedpaging kernel: Process iconv (pid: 21859, threadinfo=ecd10000 task=f64f4230) Aug 28 04:22:34 unifiedpaging kernel: Stack: 00000001 c015137e 00000000 ec658470 08000000 f7437e8c c01490d4 bfe8ed8c Aug 28 04:22:34 unifiedpaging kernel: 00000001 00000001 ec658470 f67350c4 00000000 c0149189 00000001 08000000 Aug 28 04:22:34 unifiedpaging kernel: bfe8ed8c f7437e8c f6735080 00000001 ec658470 ecdd6ff8 bfe8ed8c c0149a28 Aug 28 04:22:34 unifiedpaging kernel: Call Trace: Aug 28 04:22:34 unifiedpaging kernel: [<c015137e>] valid_swaphandles+0x42/0x6d Aug 28 04:22:34 unifiedpaging kernel: [<c01490d4>] swapin_readahead+0x18/0x57 Aug 28 04:22:34 unifiedpaging kernel: [<c0149189>] do_swap_page+0x76/0x2c5 Aug 28 04:22:34 unifiedpaging kernel: [<c0149a28>] handle_mm_fault+0xf8/0x175 Aug 28 04:22:34 unifiedpaging kernel: [<c011a65b>] do_page_fault+0x1ae/0x5b6 Aug 28 04:22:34 unifiedpaging kernel: [<c01604b3>] pipe_readv+0x225/0x29e Aug 28 04:22:34 unifiedpaging kernel: [<c0160548>] pipe_read+0x1c/0x20 Aug 28 04:22:34 unifiedpaging kernel: [<c0156011>] vfs_read+0xb6/0xe2 Aug 28 04:22:34 unifiedpaging kernel: [<c0156224>] sys_read+0x3c/0x62 Aug 28 04:22:34 unifiedpaging kernel: [<c011a4ad>] do_page_fault+0x0/0x5b6 Aug 28 04:22:34 unifiedpaging kernel: [<c02c7e53>] error_code+0x2f/0x38 Aug 28 04:22:34 unifiedpaging kernel: Code: 00 75 09 f0 81 02 00 00 00 01 30 c9 89 c8 c3 53 89 c3 81 78 04 ad 4e ad de 74 18 ff 74 24 04 68 2b 97 2d c0 e8 db ba e5 ff 58 5a <0f> 0b 85 00 50 88 2d c0 f0 fe 0b 79 09 f3 90 80 3b 00 7e f9 eb Aug 28 04:22:34 unifiedpaging kernel: <0>Fatal exception: panic in 5 seconds

1 0

Re: [CentOS] impress viewer for openoffice
by Rohan Walsh 28 Aug '05

28 Aug '05

Bryan wrote: } Herein lies the problem. it gets worse :) just reinstalled wine again to see it it works (still had the same home dir with the windows apps in it) Opened a ppt file someone sent me with the MS PP viewer to test it...all the pics are upside down! At least OOo views it the right way up. Go figure.

1 0

Onboard RAID Tyan Transport GT24 (Thunder K8SRE s2891)
by olinux 28 Aug '05

28 Aug '05

I've been checking out this and like the looks of it. http://www.tyan.com/products/html/gt24b2891.html I was told the onboard SATA RAID controller can only be used by windows. However, others have told me that there is no problem using it with linux. Anyone used the Tyan Transport GT24 (TYAN Thunder K8SRE s2891 motherboard)? Good choice for a CentOS server? Thanks, Josh __________________________________ Yahoo! Mail for Mobile Take Yahoo! Mail with you! Check email on your mobile phone. http://mobile.yahoo.com/learn/mail

2 1

file system defragmentation
by Fong Vang 27 Aug '05

27 Aug '05

I've read in many places that file systems on Linux do not suffer the same fragmentation problems of Windows systems. No one has provided a clear explanation as to why fragmentation is not an issue for file systems such as ext2/3, reiserfs, xfs, etc. Just curious.

10 11

Dual Boot problem
by Henry Newton 26 Aug '05

26 Aug '05

Hi all Have tried to dual boot CentOS with SUSE 9.3. Installed SUSE first then CentOS 4 and now cant boot into SUSE any ideas how I can get grub to pick up SUSE..I thought I had configured grub correctly at install. Regards. Newton

5 4

RE: [CentOS] Mount floppy on startup?
by Ash Christopher 26 Aug '05

26 Aug '05

In reality, it is because I am anal. I changed to CentOS from Gentoo, and with Gentoo, there was no /media directory. I had drives mounted to /media/music , /media/television, and so on. So, when I changed to CentOS, by habit I wanted the same structure. Now when connecting to my samba share that connects to the /media directory, I get two other directories; floppy and lost+found. I guess it isn't a big deal, but it definitely bothers me. There has to be a reason that that dir and fstab line are being added. The fact that I don't know how it works bothers me more than having those two directories =). -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Mike McCarty Sent: Friday, August 26, 2005 11:59 AM To: CentOS mailing list Subject: Re: [CentOS] Mount floppy on startup? Ash Christopher wrote: > Ok, it seems I am a little off on my problem description. > > I can delete /media/floppy but on system restart, that directory is > automagically created. I thought this would have been from my fstab > entry, so I deleted both the /dev/fd0 line from my fstab, and deleted > the /media/floppy directory but on bootup, both are created. Ah, I thought you meant that you were having mounts take place when the floppy disc was present in the drive. Why do you care if there is an empty directory? Mike -- p="p=%c%s%c;main(){printf(p,34,p,34);}";main(){printf(p,34,p,34);} This message made from 100% recycled bits. You have found the bank of Larn. I can explain it for you, but I can't understand it for you. I speak only for myself, and I am unanimous in that! _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

2 1

OT: CentOS server with 2 GbE links to 2 GbE switches
by Patrick 26 Aug '05

26 Aug '05

Hi all, I am trying to come up with an architecture that has some redundancy. The idea is to hook up the two GbE LAN interfaces of a CentOS server to two Gigabit Ethernet switches. In case one switch goes down, there is a redundant path (the server is redundant too). Here is the idea: ----------- | GbE | PCs ------------| switch |------------ | | ----------- | | ----------------- ----------------- ---| Workgoup Switch | | CentOS/Asterisk | | ----------------- ----------------- | | ----------- | VoIP ------------| GbE |------------ Phones | switch | ----------- How would I acomplish this? Can I use IP addresses from one IP network (say 10.0.0.0/24) to assign to the 2 LAN ports on the CentOS server and a port on each of the GbE switches and then use something like OSPF on the switches and the CentOS box to do the routing? Any other ideas? Many thanks for your suggestions. Regards, Patrick

5 11

screen shifting
by Daniel Wright 26 Aug '05

26 Aug '05

Hello List, I was wondering if there is a way to shift the screens in linux. I got a kvn yesterday, and have a problem when switching from computers, where the screen is slightly shifted on one of them. I have to go into the monitor configuration screen and move the screen to the right to center it on one of the computers. Then when moving back to the other computer, that screen isn't centered and have to back to the left so its centered. Is there a way to adjust this in xorg.conf so that when I switch between the computers, I don't have to switch the computers? I am running CentOS 4.1. Thanks, Dan

3 7

RE: [CentOS] Mount floppy on startup?
by Ash Christopher 26 Aug '05

26 Aug '05

Ok, it seems I am a little off on my problem description. I can delete /media/floppy but on system restart, that directory is automagically created. I thought this would have been from my fstab entry, so I deleted both the /dev/fd0 line from my fstab, and deleted the /media/floppy directory but on bootup, both are created. -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Mike McCarty Sent: Friday, August 26, 2005 12:27 AM To: CentOS mailing list Subject: Re: [CentOS] Mount floppy on startup? Ash Christopher wrote: > Hi Craig, > > By default there is a noauto in the fstab. Depends on who created the fstab entry. > I first tried removing the entry for the floppy from the fstab, and upon > my next boot up the following was inserted at the end of my fstab file: > > /dev/fd0 /media/floppy auto > pamconsole,exec,noauto,managed 0 0 > This is my entry, which works under FC2 to do exactly what you want. /dev/fd0 /mnt/floppy auto noauto,user,exec,kudzu 0 0 (well, I cut some space for readability) > Are you suggesting I change this to the following? So, as you can see, > the noauto is already in my fstab. Yes, I don't understand what is the problem, myself. OTOH, I don't know what the "pamconsole" does, either, nor the "managed". Perhaps "managed" is a replacement for "kudzu", but I doubt it. > Maybe I do not understand your solution properly. > > Thanks, > Ash Mike -- p="p=%c%s%c;main(){printf(p,34,p,34);}";main(){printf(p,34,p,34);} This message made from 100% recycled bits. You have found the bank of Larn. I can explain it for you, but I can't understand it for you. I speak only for myself, and I am unanimous in that! _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

2 1

Gfs and storage
by Wayne 26 Aug '05

26 Aug '05

Hi Guys, I have two mail servers and I want them to use gfs to share some storage device.. I don't want to buy a storage device but I have a spare server that maybe could be used. Anybody here use gfs without a proper san? Say just somehow using a server running linux? Or anybody have any thoughts? Thanks, Wayne

6 6

portsentry and proftpd RPMs available
by Troy Engel 26 Aug '05

26 Aug '05

Just dropping a note, I've built CentOS4 friendly RPMs (as well as RHEL4 and FC4) of two of my favourite tools, PortSentry and ProFTPd: ftp://ftp.pbone.net/mirror/ftp.falsehope.net/home/tengel/portsentry/CentOS4/ ftp://ftp.pbone.net/mirror/ftp.falsehope.net/home/tengel/proftpd/CentOS4/ PortSentry is built using the last known (RedHat 9 based) SPEC/patches from FreshRPMS, updated to apply with the latest known version 1.2. I have noticed no problems in it's operation on a production server, it's detecting portscans and dropping IPs as expected. ProFTPd has a backport of a patch applied that makes it work with the default MySQL 'old_passwords=1' setting found in RHEL4/CentOS4 default installs (proftpd bug #2644). If you don't want ProFTPd MySQL support in CentOS4, simply rebuild the SRPM without any commandline options. Both packages SRPMs should cleanly rebuild on CentOS3/RHEL3, but untested by me. -te -- Troy Engel | Systems Engineer Fluid Inc. | http://www.fluid.com

1 0

php-memcache module and Centos 3
by Alain NAKACHE 26 Aug '05

26 Aug '05

Hi all, I need to compile the php-memcache PECL module but it needs a php 4.3.3 version. RHEL 3/Centos 3 provides only a php 4.3.2 but the symbol ' php_stream_pclose' is unknown. The compilation fail with : ext/memcache/memcache.o(.text+0x7ab):/home/alain/rpm/BUILD/php-4.3.2/ext/memcache/memcache.c:386: undefined reference to `php_stream_pclose' Then I wonder if a guru on this list managed to create a patch easily integrated in the php.src.rpm to permit the usage of php-memcache on Centos3 -- Alain

1 0

impress viewer for openoffice
by Jerry Geis 26 Aug '05

26 Aug '05

Hi, I am attempting to find an openoffice powerpower point viewer. I found imposter but when I run my file it says "Cannot find zip signature". I though I would zip it up an try it again but that did not work either. Also I dont think there is a way from the command line to go fullscreen? not sure. Anyone know of a good power point viewer for centos? or a way to make impress startup and go into slideshow mode? Either is fine... Jerry

2 1

Re: [CentOS] OT: CentOS server with 2 GbE links to 2 GbE switches
by Jeff Stacey 26 Aug '05

26 Aug '05

Have a look at http://linux-ip.net/html/ether-bonding.html#ether-bonding-ha You can only use one link at a time. The second nic is for fail-over. * Jeff >>> centos(a)puzzled.xs4all.nl 8/26/2005 8:36:42 AM >>> Hi all, I am trying to come up with an architecture that has some redundancy. The idea is to hook up the two GbE LAN interfaces of a CentOS server to two Gigabit Ethernet switches. In case one switch goes down, there is a redundant path (the server is redundant too). Here is the idea: ----------- | GbE | PCs ------------| switch |------------ | | ----------- | | ----------------- ----------------- ---| Workgoup Switch | | CentOS/Asterisk | | ----------------- ----------------- | | ----------- | VoIP ------------| GbE |------------ Phones | switch | ----------- How would I acomplish this? Can I use IP addresses from one IP network (say 10.0.0.0/24) to assign to the 2 LAN ports on the CentOS server and a port on each of the GbE switches and then use something like OSPF on the switches and the CentOS box to do the routing? Any other ideas? Many thanks for your suggestions. Regards, Patrick _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

2 1

RE: [CentOS] 'Many' packages installed - CentOS 4.1
by Plant, Dean 26 Aug '05

26 Aug '05

Tim Edwards wrote: > John Hinton wrote: >> Craig White wrote: >> I don't know, I must be choosing something that's throwing the extra >> garbage in. And I know, I could write my own KS, but gee, I don't do >> it often enough for that and some machines vary, for instance some >> are nameservers some are not. A person can spend a lot of time in >> dependancy hell trying to get a clean install. If one does select >> minimal, are you presented with the custom option during install? Or >> is minimal only available at the bottom of the customization screen? >> Seems like figuring out what's missing might not be worth the effort >> to trim the fat? And maybe I'm crazy, but it seems that installing >> packages like bind during the intial install, configures itself more >> completely off the start >> versus installing the package later? >> >> A great point was made..... Custom should be Custom and should allow >> minimal within that scope. Custom doesn't even seem to have nearly >> the full package list shown, although yes, it can be argued that some >> packages simply must be installed and therefore don't need to be >> shown. Then again, maybe one of my 'other' selections is throwing X >> into the game? >> >> When CentOS finalizes their 'Server CD', perhaps a copy should be >> sent >> to RedHat!! LOL! >> >> Again, I know this is not a 'CentOS' issue. And crap... here I go >> rambling again! Sorry. > > Just to throw in my $0.02: we do minimal installs with all our RHEL > and CentOS boxes (both 3 and 4) and it really is minimal - no X, no > GUI, no KDE/GNOME or Window Managers. If you're building a server > then you know what should be on it so you can just do things like > 'yum install httpd php mysql' or whatever to get yourself going. Its > a very clean way of doing things. I do exactly the same process, minimal install, then "yum install <what-I-need-on-this-server>". I have been thinking of trying to produce a list of superfluous packages that are installed with the minimal install. Has anyone already done this so I can simply paste a "yum remove <non-required-packages>" after a minimal install to achieve a true minimal install? Dean

2 1

umask and nautilus/gnome
by Tony 26 Aug '05

26 Aug '05

Hi, Does anyone know how to set umask such that nautilus actually obeys it? I have umask 002 added to the end of .bashrc, and if I touch a file from a gnome terminal, I correctly get -rw-rw-r--. However if I right click in a nautilus window and "create document" then "empty file" I end up with -rw------ which is obviously going to be a royal pita for group working! -- Cheers, Tony

1 0

CentOS-announce Digest, Vol 6, Issue 13
by centos-announce-request＠centos.org 26 Aug '05

26 Aug '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2005:529-01: Important CentOS 2 i386 kernel security update (John Newbigin) ---------------------------------------------------------------------- Message: 1 Date: Fri, 26 Aug 2005 13:54:07 +1000 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2005:529-01: Important CentOS 2 i386 kernel security update To: centos-announce(a)centos.org Message-ID: <430E925F.7010103(a)ict.swin.edu.au> Content-Type: text/plain; charset=us-ascii; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2005:529-01 Important: kernel security update Files available: kernel-2.4.9-e.65.athlon.rpm kernel-smp-2.4.9-e.65.athlon.rpm kernel-BOOT-2.4.9-e.65.i386.rpm kernel-doc-2.4.9-e.65.i386.rpm kernel-headers-2.4.9-e.65.i386.rpm kernel-source-2.4.9-e.65.i386.rpm kernel-2.4.9-e.65.i686.rpm kernel-debug-2.4.9-e.65.i686.rpm kernel-enterprise-2.4.9-e.65.i686.rpm kernel-smp-2.4.9-e.65.i686.rpm kernel-summit-2.4.9-e.65.i686.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin Computer Systems Officer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 6, Issue 13 **********************************************

1 0

RE: [CentOS] Mount floppy on startup?
by Ash Christopher 26 Aug '05

26 Aug '05

Hi Craig, By default there is a noauto in the fstab. I first tried removing the entry for the floppy from the fstab, and upon my next boot up the following was inserted at the end of my fstab file: /dev/fd0 /media/floppy auto pamconsole,exec,noauto,managed 0 0 Are you suggesting I change this to the following? So, as you can see, the noauto is already in my fstab. Maybe I do not understand your solution properly. Thanks, Ash -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Craig White Sent: Thursday, August 25, 2005 1:50 PM To: CentOS mailing list Subject: Re: [CentOS] Mount floppy on startup? On Thu, 2005-08-25 at 13:40 -0600, Ash Christopher wrote: > On bootup, it seems CentOS automatically mounts the floppy drive > to /media/floppy. > > > > Is there a way to stop this from happening, short of removing the > floppy drive from the system (as I don't use it)? > --- noauto option in /etc/fstab should do it... CentOS 4 /dev/fd0 /media/floppy1 auto pamconsole,fscontext=system_u:object_r:removable_t,exec,noauto,managed 0 0 CentOS 3 /dev/fd0 /mnt/floppy auto noauto,owner,kudzu 0 0 Craig _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

2 1

Mail[x] / Sendmail - CentOS 3
by Ken Godee 25 Aug '05

25 Aug '05

I'm upgrading some servers from rh7.3 -> CentOS 3 and have several scripts that use "mail" to relay messages to my mail server. Am I correct on the assumption that you now have to have sendmail running to use mail, where as previously you did not? Or am I missing something? It's been driving me crazy for couple days trying to figure out why "mail" works on 7.3 without sendmail running and will only work with sendmail running on CentOS 3. I'm guessing as part of a "secure install" you now need to use "client queue ruuner" part of sendmail? Sure liked the old way, anyway to revert? Just don't like to run an additional process for just a couple of emails a day, or I guess I could use a cron job to process emails.

3 4

auto.fs
by Craig White 25 Aug '05

25 Aug '05

Running a CentOS 4 server and have a few different Linux machines at home. One desktop is FC 3 and one is FC 4 and I have an old laptop running FC 1 (but I can update - just don't want to necessarily bother). I am running LDAP and have 'included' redhat/autofs.schema in the setup but have been too chicken to try to implement because I just have a bad feeling about this... If I automount my home directory from the LDAP server, am I gonna run into a mess with different versions of things from the different systems (i.e. GNOME settings/evolution/firefox). Is it gonna be much slower because my home directory is now gonna be an NFS mount and I have a 100BaseT connection to my home directory? Any other considerations? Craig

3 2

Mount floppy on startup?
by Ash Christopher 25 Aug '05

25 Aug '05

On bootup, it seems CentOS automatically mounts the floppy drive to /media/floppy. Is there a way to stop this from happening, short of removing the floppy drive from the system (as I don't use it)? Thanks, Ash Christopher

2 1

IPTables not working?
by centos＠silverservers.com 25 Aug '05

25 Aug '05

Hello CentOS, I'm having a strange situation on one of my servers. I'm running CentOS with all the latest yum updates. It runs fine, but iptables does not seem to be 'consistently' dropping the packets from the IP's I've put a drop rule in for. When I do iptables -L I still see the rule in place: iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination RH-Firewall-1-INPUT all -- anywhere anywhere DROP all -- ip176-0.netcathost.com/24 anywhere With this rule in place and iptables running, I am now getting the blocked IP's showing up in my apache logs again. this used to work... has something changed? -- Best regards, Mickael mailto:mikelists@silverservers.com

5 6

dell sc420 connect to LCD 32" at 1366x768
by Jerry Geis 25 Aug '05

25 Aug '05

*Bryan, the dell sc420 is a poweredge tower. So in this case I wont have to "worry" about the laptop LCD not matching the DB15. Jerry Bryan J. Smith* b.j.smith at ieee.org <mailto:centos%40centos.org?Subject=%5BCentOS%5D%20dell%20sc420%20connect%20…> /Thu Aug 25 15:00:05 UTC 2005/ * Previous message: [CentOS] dell sc420 connect to LCD 32" at 1366x768 <http://lists.centos.org/pipermail/centos/2005-August/010625.html> * Next message: [CentOS] IPTables not working? <http://lists.centos.org/pipermail/centos/2005-August/010627.html> * *Messages sorted by:* [ date ] <http://lists.centos.org/pipermail/centos/2005-August/date.html#10628> [ thread ] <http://lists.centos.org/pipermail/centos/2005-August/thread.html#10628> [ subject ] <http://lists.centos.org/pipermail/centos/2005-August/subject.html#10628> [ author ] <http://lists.centos.org/pipermail/centos/2005-August/author.html#10628> ------------------------------------------------------------------------ On Thu, 2005-08-25 at 09:40 -0500, Jerry Geis wrote: >/ I am attempting to connect my dell SC420 to a 32" LCD at 1366x768. />/ I have attached my currect config file and currect X start log. />/ ... />/ (II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, />/ i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), />/ 915GM, 945G / I have had nothing but problems with notebooks and Dell i8x0 GPUs when it comes to the external DB15 port. For some reason the driver will only send the _exact_same_signaling_ of the internal LCD to the external port. So unless the external monitor/LCD is capable of the exact same scan ranges as the notebook's LCD, I've been screwed. I've been meaning to try my notebook in Windows to see if it has the same problem. I can only assume the Windows drivers from Intel actually know how to drive the external DB15 at a difference scan range. With nVidia Go Mobile chipsets, both the MIT "nv" driver (assuming the OEM hasn't changed things) and the nVidia "nvidia" driver have no issue driving the external DB15 at a different scan range than the internal LCD. -- Bryan J. Smith b.j.smith at ieee.org <http://lists.centos.org/mailman/listinfo/centos> http://thebs413.blogspot.com ---------------------------------------------------------------------- The best things in life are NOT free - which is why life is easiest if you save all the bills until you can share them with the perfect woman

4 5

error while loading shared libraries: liblinc.so.1
by Dave Gutteridge 25 Aug '05

25 Aug '05

When trying to run giFTui, I get the following error: giftui: error while loading shared libraries: liblinc.so.1: cannot open shared object file: No such file or directory So I looked on the web for liblinc.so.1, and learned (?) that it was a part of at-spi. Trying to isntall the RPM told me that at-spi was already installed. I also tried a YUM install, and it simply said "nothing to do". Which part am I doing wrong? Is there a different RPM I should be downloading? Is the problem not a matter of downloading RPMs? What do I do to get this "shared object file" on my computer? Dave

1 0

dell sc420 connect to LCD 32" at 1366x768
by Jerry Geis 25 Aug '05

25 Aug '05

Hi, I am attempting to connect my dell SC420 to a 32" LCD at 1366x768. I have attached my currect config file and currect X start log. How do I massage the xorf file to run at the native resolution of the LCD? It currently runs but is in a virtual mode. The screen scrolls. Any help is appreciated. I am using Centos 4.1. Jerry X Window System Version 6.8.2 Release Date: 9 February 2005 X Protocol Version 11, Revision 0, Release 6.8.2 Build Operating System: Linux 2.6.9-5.0.5.ELsmp i686 [ELF] Current Operating System: Linux testdell.msgnet.com 2.6.9-11.EL #1 Wed Jun 8 16:59:52 CDT 2005 i686 Build Date: 08 June 2005 Build Host: Before reporting problems, check http://wiki.X.Org to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.9-11.EL (buildcentos(a)build1.hughesjr.centos.org) (gcc version 3.4.3 20050227 (Red Hat 3.4.3-22)) #1 Wed Jun 8 16:59:52 CDT 2005 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 25 10:15:18 2005 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "single head configuration" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Driver: 0.7 X.Org XInput driver : 0.4 X.Org Server Extension : 0.2 X.Org Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (--) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2588 card 1028,0180 rev 04 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,2589 card 0000,0000 rev 04 class 06,04,00 hdr 01 (II) PCI: 00:02:0: chip 8086,258a card 1028,0180 rev 04 class 03,00,00 hdr 00 (II) PCI: 00:1c:0: chip 8086,2660 card 0000,0000 rev 03 class 06,04,00 hdr 81 (II) PCI: 00:1c:1: chip 8086,2662 card 0000,0000 rev 03 class 06,04,00 hdr 81 (II) PCI: 00:1d:0: chip 8086,2658 card 1028,0180 rev 03 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,2659 card 1028,0180 rev 03 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,265a card 1028,0180 rev 03 class 0c,03,00 hdr 00 (II) PCI: 00:1d:3: chip 8086,265b card 1028,0180 rev 03 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,265c card 1028,0180 rev 03 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev d3 class 06,04,01 hdr 01 (II) PCI: 00:1f:0: chip 8086,2640 card 0000,0000 rev 03 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,266f card 1028,0180 rev 03 class 01,01,8a hdr 00 (II) PCI: 00:1f:2: chip 8086,2652 card 8086,2652 rev 03 class 01,01,8f hdr 00 (II) PCI: 00:1f:3: chip 8086,266a card 1028,0180 rev 03 class 0c,05,00 hdr 00 (II) PCI: 02:00:0: chip 14e4,1677 card 1028,0180 rev 01 class 02,00,00 hdr 00 (II) PCI: 04:00:0: chip 135c,0060 card 135c,0060 rev 13 class 07,02,00 hdr 00 (II) PCI: 04:01:0: chip e159,0001 card b100,0003 rev 00 class 07,80,00 hdr 00 (II) PCI: 04:02:0: chip e159,0001 card b100,0003 rev 00 class 07,80,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,4), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared) (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xdfe00000 - 0xdfefffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared) (II) Bus 2 non-prefetchable memory range: [0] -1 0 0xdfd00000 - 0xdfdfffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 3: bridge is at (0:28:1), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared) (II) Bus 3 non-prefetchable memory range: [0] -1 0 0xdfc00000 - 0xdfcfffff (0x100000) MX[B] (II) Subtractive PCI-to-PCI bridge: (II) Bus 4: bridge is at (0:30:0), (0,4,4), BCTRL: 0x0002 (VGA_EN is cleared) (II) Bus 4 I/O range: [0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B] (II) Bus 4 non-prefetchable memory range: [0] -1 0 0xdfa00000 - 0xdfbfffff (0x200000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(0:2:0) Intel Corp. unknown chipset (0x258a) rev 4, Mem @ 0xdff80000/19, 0xf0000000/27, 0xdff40000/18, I/O @ 0xecd8/3 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xdfaff000 - 0xdfafffff (0x1000) MX[B] [1] -1 0 0xdfafe000 - 0xdfafefff (0x1000) MX[B] [2] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B] [3] -1 0 0xdff3fc00 - 0xdff3ffff (0x400) MX[B] [4] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B] [5] -1 0 0xdff40000 - 0xdff7ffff (0x40000) MX[B](B) [6] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [7] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[B](B) [8] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [9] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [10] -1 0 0x0000d440 - 0x0000d47f (0x40) IX[B] [11] -1 0 0x0000d480 - 0x0000d4ff (0x80) IX[B] [12] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [13] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[B] [14] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[B] [15] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[B] [16] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[B] [17] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[B] [18] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [19] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [20] -1 0 0x00000170 - 0x00000170 (0x1) IX[B] [21] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [23] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B] [24] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B] [25] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [26] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [27] -1 0 0x0000ecd8 - 0x0000ecdf (0x8) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xdfaff000 - 0xdfafffff (0x1000) MX[B] [1] -1 0 0xdfafe000 - 0xdfafefff (0x1000) MX[B] [2] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B] [3] -1 0 0xdff3fc00 - 0xdff3ffff (0x400) MX[B] [4] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B] [5] -1 0 0xdff40000 - 0xdff7ffff (0x40000) MX[B](B) [6] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [7] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[B](B) [8] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [9] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [10] -1 0 0x0000d440 - 0x0000d47f (0x40) IX[B] [11] -1 0 0x0000d480 - 0x0000d4ff (0x80) IX[B] [12] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [13] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[B] [14] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[B] [15] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[B] [16] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[B] [17] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[B] [18] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [19] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [20] -1 0 0x00000170 - 0x00000170 (0x1) IX[B] [21] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [23] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B] [24] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B] [25] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [26] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [27] -1 0 0x0000ecd8 - 0x0000ecdf (0x8) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xdfaff000 - 0xdfafffff (0x1000) MX[B] [6] -1 0 0xdfafe000 - 0xdfafefff (0x1000) MX[B] [7] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B] [8] -1 0 0xdff3fc00 - 0xdff3ffff (0x400) MX[B] [9] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B] [10] -1 0 0xdff40000 - 0xdff7ffff (0x40000) MX[B](B) [11] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [12] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[B](B) [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [16] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [17] -1 0 0x0000d440 - 0x0000d47f (0x40) IX[B] [18] -1 0 0x0000d480 - 0x0000d4ff (0x80) IX[B] [19] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [20] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[B] [21] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[B] [22] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[B] [23] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[B] [24] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[B] [25] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [26] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [27] -1 0 0x00000170 - 0x00000170 (0x1) IX[B] [28] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [30] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B] [31] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B] [32] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [33] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [34] -1 0 0x0000ecd8 - 0x0000ecdf (0x8) IX[B](B) (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "fbdevhw" (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 6.8.2, module version = 0.0.2 ABI class: X.Org Video Driver, version 0.7 (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a (II) Module record: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension RECORD (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 6.8.2, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension XFree86-DRI (II) LoadModule: "i810" (II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o (II) Module i810: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.5.153 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 0.7 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) LoadModule: "kbd" (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o (II) Module kbd: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G (II) Primary Device is: PCI 00:02:0 (--) Assigning device section with no busID to primary device (--) Chipset E7221 (i915) found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xdfaff000 - 0xdfafffff (0x1000) MX[B] [6] -1 0 0xdfafe000 - 0xdfafefff (0x1000) MX[B] [7] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B] [8] -1 0 0xdff3fc00 - 0xdff3ffff (0x400) MX[B] [9] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B] [10] -1 0 0xdff40000 - 0xdff7ffff (0x40000) MX[B](B) [11] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [12] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[B](B) [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [16] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [17] -1 0 0x0000d440 - 0x0000d47f (0x40) IX[B] [18] -1 0 0x0000d480 - 0x0000d4ff (0x80) IX[B] [19] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [20] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[B] [21] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[B] [22] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[B] [23] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[B] [24] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[B] [25] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [26] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [27] -1 0 0x00000170 - 0x00000170 (0x1) IX[B] [28] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [30] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B] [31] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B] [32] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [33] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [34] -1 0 0x0000ecd8 - 0x0000ecdf (0x8) IX[B](B) (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xdfaff000 - 0xdfafffff (0x1000) MX[B] [6] -1 0 0xdfafe000 - 0xdfafefff (0x1000) MX[B] [7] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B] [8] -1 0 0xdff3fc00 - 0xdff3ffff (0x400) MX[B] [9] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B] [10] -1 0 0xdff40000 - 0xdff7ffff (0x40000) MX[B](B) [11] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [12] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[B](B) [13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [18] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [19] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [20] -1 0 0x0000d440 - 0x0000d47f (0x40) IX[B] [21] -1 0 0x0000d480 - 0x0000d4ff (0x80) IX[B] [22] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [23] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[B] [24] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[B] [25] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[B] [26] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[B] [27] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[B] [28] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [29] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [30] -1 0 0x00000170 - 0x00000170 (0x1) IX[B] [31] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [32] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [33] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B] [34] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B] [35] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [36] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [37] -1 0 0x0000ecd8 - 0x0000ecdf (0x8) IX[B](B) [38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [39] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.1.0 ABI class: X.Org Video Driver, version 0.7 (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="X.Org Foundation" compiled for 6.8.2, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.7 (**) I810(0): Depth 24, (--) framebuffer bpp 32 (==) I810(0): RGB weight 888 (==) I810(0): Default visual is TrueColor (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a (II) I810(0): initializing int10 (WW) I810(0): Bad V_BIOS checksum (II) I810(0): Primary V_BIOS segment is: 0xc000 (II) I810(0): VESA BIOS detected (II) I810(0): VESA VBE Version 3.0 (II) I810(0): VESA VBE Total Mem: 7872 kB (II) I810(0): VESA VBE OEM: Intel(r)CopperRiver Graphics Chip Accelerated VGA BIOS (II) I810(0): VESA VBE OEM Software Rev: 1.0 (II) I810(0): VESA VBE OEM Vendor: Intel Corporation (II) I810(0): VESA VBE OEM Product: Intel(r)CopperRiver Graphics Controller (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (II) I810(0): Integrated Graphics Chipset: Intel(R) E7221 (i915) (--) I810(0): Chipset: "E7221 (i915)" (--) I810(0): Linear framebuffer at 0xF0000000 (--) I810(0): IO registers at addr 0xDFF80000 (II) I810(0): 1 display pipe available. (II) I810(0): detected 8060 kB stolen memory. (WW) I810(0): Detected stolen memory (8000 kB) doesn't match what the BIOS reports (7872 kB) (EE) GARTInit: Unable to open /dev/agpgart (No such file or directory) (WW) I810(0): /dev/agpgart is either not available, or no memory is available for allocation. Using pre-allocated memory only. (--) I810(0): Pre-allocated VideoRAM: 8060 kByte (--) I810(0): VideoRAM: 8060 kByte (==) I810(0): video overlay key set to 0x101fe (**) I810(0): page flipping disabled (==) I810(0): Using gamma correction (1.0, 1.0, 1.0) (II) I810(0): BIOS Build: 3359 (==) I810(0): Device Presence: disabled. (WW) I810(0): Extended BIOS function 0x5f64 not supported. (==) I810(0): Display Info: enabled. (II) I810(0): Broken BIOSes cause the system to hang here. If you encounter this problem please add Option "DisplayInfo" "FALSE" to the Device section of your XF86Config file. (WW) I810(0): Extended BIOS function 0x5f64 not supported. (WW) I810(0): Extended BIOS function 0x5f64 not supported. (WW) I810(0): Extended BIOS function 0x5f64 not supported. (WW) I810(0): Extended BIOS function 0x5f64 not supported. (WW) I810(0): Extended BIOS function 0x5f64 not supported. (WW) I810(0): Extended BIOS function 0x5f64 not supported. (II) I810(0): Currently active displays on Pipe A: (II) I810(0): CRT (==) I810(0): Display is using Pipe A (--) I810(0): HW Cursor disabled because it needs agpgart memory. (--) I810(0): Maximum frambuffer space: 7912 kByte (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) I810(0): VESA VBE DDC supported (II) I810(0): VESA VBE DDC Level 2 (II) I810(0): VESA VBE DDC transfer in appr. 1 sec. (II) I810(0): VESA VBE DDC read successfully (II) I810(0): Manufacturer: VIZ Model: 1200 Serial#: 16843009 (II) I810(0): Year: 2005 Week: 25 (II) I810(0): EDID Version: 1.3 (II) I810(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V (II) I810(0): Signal levels configurable (II) I810(0): Sync: Separate Composite SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen (II) I810(0): Max H-Image Size [cm]: horiz.: 70 vert.: 40 (II) I810(0): Gamma: 2.20 (II) I810(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) I810(0): First detailed timing is preferred mode (II) I810(0): redX: 0.640 redY: 0.330 greenX: 0.270 greenY: 0.600 (II) I810(0): blueX: 0.150 blueY: 0.060 whiteX: 0.280 whiteY: 0.290 (II) I810(0): Supported VESA Video Modes: (II) I810(0): 640x480@72Hz (II) I810(0): 640x480@75Hz (II) I810(0): 800x600@56Hz (II) I810(0): 800x600@60Hz (II) I810(0): 800x600@72Hz (II) I810(0): 800x600@75Hz (II) I810(0): 1024x768@60Hz (II) I810(0): 1024x768@75Hz (II) I810(0): Manufacturer's mask: 0 (II) I810(0): Ranges: V min: 50 V max: 85 Hz, H min: 31 H max: 70 kHz, PixClock max 110 MHz (II) I810(0): Supported additional Video Mode: (II) I810(0): clock: 85.5 MHz Image Size: 700 x 400 mm (II) I810(0): h_active: 1366 h_sync: 1494 h_sync_end 1624 h_blank_end 1798 h_border: 0 (II) I810(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 795 v_border: 0 (II) I810(0): Serial No: HLECBBF251441 (II) I810(0): Monitor name: VIZIO L32 (II) I810(0): Will use BIOS call 0x5f05 to set refresh rates for CRTs. (--) I810(0): Maximum space available for video modes: 7872 kByte (II) I810(0): Using detected DDC timings (II) I810(0): HorizSync 31-70 (II) I810(0): VertRefresh 50-85 Mode: 30 (640x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005571 BytesPerScanline: 640 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 23 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 640 BnkNumberOfImagePages: 23 LinNumberOfImagePages: 23 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 32 (800x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005571 BytesPerScanline: 832 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 14 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 832 BnkNumberOfImagePages: 14 LinNumberOfImagePages: 14 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 34 (1024x768) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005571 BytesPerScanline: 1024 XResolution: 1024 YResolution: 768 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 9 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 1024 BnkNumberOfImagePages: 9 LinNumberOfImagePages: 9 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 38 (1280x1024) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005571 BytesPerScanline: 1280 XResolution: 1280 YResolution: 1024 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 5 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 1280 BnkNumberOfImagePages: 5 LinNumberOfImagePages: 5 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 3a (1600x1200) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005571 BytesPerScanline: 1600 XResolution: 1600 YResolution: 1200 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 3 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 1600 BnkNumberOfImagePages: 3 LinNumberOfImagePages: 3 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 3c (1920x1440) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005571 BytesPerScanline: 1920 XResolution: 1920 YResolution: 1440 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 1 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 1920 BnkNumberOfImagePages: 1 LinNumberOfImagePages: 1 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 41 (640x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005571 BytesPerScanline: 1280 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 12 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 1280 BnkNumberOfImagePages: 12 LinNumberOfImagePages: 12 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 43 (800x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005571 BytesPerScanline: 1600 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 7 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 1600 BnkNumberOfImagePages: 7 LinNumberOfImagePages: 7 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 45 (1024x768) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005571 BytesPerScanline: 2048 XResolution: 1024 YResolution: 768 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 4 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 2048 BnkNumberOfImagePages: 4 LinNumberOfImagePages: 4 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 49 (1280x1024) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005571 BytesPerScanline: 2560 XResolution: 1280 YResolution: 1024 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 2 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 2560 BnkNumberOfImagePages: 2 LinNumberOfImagePages: 2 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 4b (1600x1200) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005571 BytesPerScanline: 3200 XResolution: 1600 YResolution: 1200 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 1 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 3200 BnkNumberOfImagePages: 1 LinNumberOfImagePages: 1 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 4d (1920x1440) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005571 BytesPerScanline: 3840 XResolution: 1920 YResolution: 1440 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 0 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 3840 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 *Mode: 50 (640x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005571 BytesPerScanline: 2560 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 5 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 2560 BnkNumberOfImagePages: 5 LinNumberOfImagePages: 5 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 *Mode: 52 (800x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005571 BytesPerScanline: 3200 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 3 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 3200 BnkNumberOfImagePages: 3 LinNumberOfImagePages: 3 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 *Mode: 54 (1024x768) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005571 BytesPerScanline: 4096 XResolution: 1024 YResolution: 768 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 1 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 4096 BnkNumberOfImagePages: 1 LinNumberOfImagePages: 1 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 *(WW) (1280x1024,Monitor0) mode clock 135MHz exceeds DDC maximum 110MHz (WW) (1280x1024,Monitor0) mode clock 157.5MHz exceeds DDC maximum 110MHz Mode: 58 (1280x1024) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005571 BytesPerScanline: 5120 XResolution: 1280 YResolution: 1024 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 0 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 5120 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 *(WW) (1600x1200,Monitor0) mode clock 162MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 175.5MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 189MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 202.5MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 229.5MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 234.576MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 234.576MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 234.576MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 204.326MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 204.326MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 204.326MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 204.326MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 204.326MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 204.326MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 204.326MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 204.326MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 204.326MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 204.326MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 195.84MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 195.84MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 195.84MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 190.247MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 190.247MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 160.833MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 160.833MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 160.833MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 160.833MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 160.833MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 160.833MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 160.833MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 160.833MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 160.833MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 160.833MHz exceeds DDC maximum 110MHz (WW) (1600x1200,Monitor0) mode clock 148.759MHz exceeds DDC maximum 110MHz Mode: 5a (1600x1200) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0005571 BytesPerScanline: 6400 XResolution: 1600 YResolution: 1200 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 0 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xf0000000 LinBytesPerScanLine: 6400 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 Mode: 5c (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 60 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 61 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 62 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 63 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 64 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 65 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 66 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 67 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 68 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 (II) I810(0): Monitor0: Using hsync range of 31.00-70.00 kHz (II) I810(0): Monitor0: Using vrefresh range of 50.00-85.00 Hz (II) I810(0): Not using mode "1366x768" (no mode of this name) RESOLUTION 1600x1200 CHECKING 1366x768 CHECKING 640x350 CHECKING 320x175 CHECKING 640x400 CHECKING 320x200 CHECKING 720x400 CHECKING 360x200 CHECKING 640x480 CHECKING 320x240 CHECKING 640x480 CHECKING 320x240 CHECKING 640x480 CHECKING 320x240 CHECKING 640x480 CHECKING 320x240 CHECKING 800x600 CHECKING 400x300 CHECKING 800x600 CHECKING 400x300 CHECKING 800x600 CHECKING 400x300 CHECKING 800x600 CHECKING 400x300 CHECKING 800x600 CHECKING 400x300 CHECKING 1024x768 CHECKING 512x384 CHECKING 1024x768 CHECKING 512x384 CHECKING 1024x768 CHECKING 512x384 CHECKING 1024x768 CHECKING 512x384 CHECKING 1024x768 CHECKING 512x384 CHECKING 1152x864 CHECKING 576x432 CHECKING 1280x960 CHECKING 640x480 CHECKING 1280x960 CHECKING 640x480 CHECKING 1280x1024 CHECKING 640x512 CHECKING 1280x1024 CHECKING 640x512 CHECKING 1280x1024 CHECKING 640x512 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1792x1344 CHECKING 896x672 CHECKING 1792x1344 CHECKING 896x672 CHECKING 1856x1392 CHECKING 928x696 CHECKING 1856x1392 CHECKING 928x696 CHECKING 1920x1440 CHECKING 960x720 CHECKING 1920x1440 CHECKING 960x720 CHECKING 832x624 CHECKING 416x312 CHECKING 1152x768 CHECKING 576x384 CHECKING 1152x864 CHECKING 576x432 CHECKING 1400x1050 CHECKING 700x525 CHECKING 1400x1050 CHECKING 700x525 CHECKING 1400x1050 CHECKING 700x525 CHECKING 1400x1050 CHECKING 700x525 CHECKING 1600x1024 CHECKING 800x512 CHECKING 1920x1200 CHECKING 960x600 CHECKING 1920x1440 CHECKING 960x720 CHECKING 2048x1536 CHECKING 1024x768 CHECKING 2048x1536 CHECKING 1024x768 CHECKING 2048x1536 CHECKING 1024x768 (1600x1200,Monitor0) mode clock 162MHz exceeds DDC maximum 110MHz RESOLUTION 1280x1024 CHECKING 1366x768 CHECKING 640x350 CHECKING 320x175 CHECKING 640x400 CHECKING 320x200 CHECKING 720x400 CHECKING 360x200 CHECKING 640x480 CHECKING 320x240 CHECKING 640x480 CHECKING 320x240 CHECKING 640x480 CHECKING 320x240 CHECKING 640x480 CHECKING 320x240 CHECKING 800x600 CHECKING 400x300 CHECKING 800x600 CHECKING 400x300 CHECKING 800x600 CHECKING 400x300 CHECKING 800x600 CHECKING 400x300 CHECKING 800x600 CHECKING 400x300 CHECKING 1024x768 CHECKING 512x384 CHECKING 1024x768 CHECKING 512x384 CHECKING 1024x768 CHECKING 512x384 CHECKING 1024x768 CHECKING 512x384 CHECKING 1024x768 CHECKING 512x384 CHECKING 1152x864 CHECKING 576x432 CHECKING 1280x960 CHECKING 640x480 CHECKING 1280x960 CHECKING 640x480 CHECKING 1280x1024 CHECKING 640x512 CHECKING 1280x1024 CHECKING 640x512 CHECKING 1280x1024 CHECKING 640x512 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1792x1344 CHECKING 896x672 CHECKING 1792x1344 CHECKING 896x672 CHECKING 1856x1392 CHECKING 928x696 CHECKING 1856x1392 CHECKING 928x696 CHECKING 1920x1440 CHECKING 960x720 CHECKING 1920x1440 CHECKING 960x720 CHECKING 832x624 CHECKING 416x312 CHECKING 1152x768 CHECKING 576x384 CHECKING 1152x864 CHECKING 576x432 CHECKING 1400x1050 CHECKING 700x525 CHECKING 1400x1050 CHECKING 700x525 CHECKING 1400x1050 CHECKING 700x525 CHECKING 1400x1050 CHECKING 700x525 CHECKING 1600x1024 CHECKING 800x512 CHECKING 1920x1200 CHECKING 960x600 CHECKING 1920x1440 CHECKING 960x720 CHECKING 2048x1536 CHECKING 1024x768 CHECKING 2048x1536 CHECKING 1024x768 CHECKING 2048x1536 CHECKING 1024x768 RESOLUTION 1024x768 CHECKING 1366x768 CHECKING 640x350 CHECKING 320x175 CHECKING 640x400 CHECKING 320x200 CHECKING 720x400 CHECKING 360x200 CHECKING 640x480 CHECKING 320x240 CHECKING 640x480 CHECKING 320x240 CHECKING 640x480 CHECKING 320x240 CHECKING 640x480 CHECKING 320x240 CHECKING 800x600 CHECKING 400x300 CHECKING 800x600 CHECKING 400x300 CHECKING 800x600 CHECKING 400x300 CHECKING 800x600 CHECKING 400x300 CHECKING 800x600 CHECKING 400x300 CHECKING 1024x768 CHECKING 512x384 CHECKING 1024x768 CHECKING 512x384 CHECKING 1024x768 CHECKING 512x384 CHECKING 1024x768 CHECKING 512x384 CHECKING 1024x768 CHECKING 512x384 CHECKING 1152x864 CHECKING 576x432 CHECKING 1280x960 CHECKING 640x480 CHECKING 1280x960 CHECKING 640x480 CHECKING 1280x1024 CHECKING 640x512 CHECKING 1280x1024 CHECKING 640x512 CHECKING 1280x1024 CHECKING 640x512 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1792x1344 CHECKING 896x672 CHECKING 1792x1344 CHECKING 896x672 CHECKING 1856x1392 CHECKING 928x696 CHECKING 1856x1392 CHECKING 928x696 CHECKING 1920x1440 CHECKING 960x720 CHECKING 1920x1440 CHECKING 960x720 CHECKING 832x624 CHECKING 416x312 CHECKING 1152x768 CHECKING 576x384 CHECKING 1152x864 CHECKING 576x432 CHECKING 1400x1050 CHECKING 700x525 CHECKING 1400x1050 CHECKING 700x525 CHECKING 1400x1050 CHECKING 700x525 CHECKING 1400x1050 CHECKING 700x525 CHECKING 1600x1024 CHECKING 800x512 CHECKING 1920x1200 CHECKING 960x600 CHECKING 1920x1440 CHECKING 960x720 CHECKING 2048x1536 CHECKING 1024x768 CHECKING 2048x1536 CHECKING 1024x768 CHECKING 2048x1536 CHECKING 1024x768 RESOLUTION 800x600 CHECKING 1366x768 CHECKING 640x350 CHECKING 320x175 CHECKING 640x400 CHECKING 320x200 CHECKING 720x400 CHECKING 360x200 CHECKING 640x480 CHECKING 320x240 CHECKING 640x480 CHECKING 320x240 CHECKING 640x480 CHECKING 320x240 CHECKING 640x480 CHECKING 320x240 CHECKING 800x600 CHECKING 400x300 CHECKING 800x600 CHECKING 400x300 CHECKING 800x600 CHECKING 400x300 CHECKING 800x600 CHECKING 400x300 CHECKING 800x600 CHECKING 400x300 CHECKING 1024x768 CHECKING 512x384 CHECKING 1024x768 CHECKING 512x384 CHECKING 1024x768 CHECKING 512x384 CHECKING 1024x768 CHECKING 512x384 CHECKING 1024x768 CHECKING 512x384 CHECKING 1152x864 CHECKING 576x432 CHECKING 1280x960 CHECKING 640x480 CHECKING 1280x960 CHECKING 640x480 CHECKING 1280x1024 CHECKING 640x512 CHECKING 1280x1024 CHECKING 640x512 CHECKING 1280x1024 CHECKING 640x512 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1792x1344 CHECKING 896x672 CHECKING 1792x1344 CHECKING 896x672 CHECKING 1856x1392 CHECKING 928x696 CHECKING 1856x1392 CHECKING 928x696 CHECKING 1920x1440 CHECKING 960x720 CHECKING 1920x1440 CHECKING 960x720 CHECKING 832x624 CHECKING 416x312 CHECKING 1152x768 CHECKING 576x384 CHECKING 1152x864 CHECKING 576x432 CHECKING 1400x1050 CHECKING 700x525 CHECKING 1400x1050 CHECKING 700x525 CHECKING 1400x1050 CHECKING 700x525 CHECKING 1400x1050 CHECKING 700x525 CHECKING 1600x1024 CHECKING 800x512 CHECKING 1920x1200 CHECKING 960x600 CHECKING 1920x1440 CHECKING 960x720 CHECKING 2048x1536 CHECKING 1024x768 CHECKING 2048x1536 CHECKING 1024x768 CHECKING 2048x1536 CHECKING 1024x768 RESOLUTION 640x480 CHECKING 1366x768 CHECKING 640x350 CHECKING 320x175 CHECKING 640x400 CHECKING 320x200 CHECKING 720x400 CHECKING 360x200 CHECKING 640x480 CHECKING 320x240 CHECKING 640x480 CHECKING 320x240 CHECKING 640x480 CHECKING 320x240 CHECKING 640x480 CHECKING 320x240 CHECKING 800x600 CHECKING 400x300 CHECKING 800x600 CHECKING 400x300 CHECKING 800x600 CHECKING 400x300 CHECKING 800x600 CHECKING 400x300 CHECKING 800x600 CHECKING 400x300 CHECKING 1024x768 CHECKING 512x384 CHECKING 1024x768 CHECKING 512x384 CHECKING 1024x768 CHECKING 512x384 CHECKING 1024x768 CHECKING 512x384 CHECKING 1024x768 CHECKING 512x384 CHECKING 1152x864 CHECKING 576x432 CHECKING 1280x960 CHECKING 640x480 CHECKING 1280x960 CHECKING 640x480 CHECKING 1280x1024 CHECKING 640x512 CHECKING 1280x1024 CHECKING 640x512 CHECKING 1280x1024 CHECKING 640x512 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1600x1200 CHECKING 800x600 CHECKING 1792x1344 CHECKING 896x672 CHECKING 1792x1344 CHECKING 896x672 CHECKING 1856x1392 CHECKING 928x696 CHECKING 1856x1392 CHECKING 928x696 CHECKING 1920x1440 CHECKING 960x720 CHECKING 1920x1440 CHECKING 960x720 CHECKING 832x624 CHECKING 416x312 CHECKING 1152x768 CHECKING 576x384 CHECKING 1152x864 CHECKING 576x432 CHECKING 1400x1050 CHECKING 700x525 CHECKING 1400x1050 CHECKING 700x525 CHECKING 1400x1050 CHECKING 700x525 CHECKING 1400x1050 CHECKING 700x525 CHECKING 1600x1024 CHECKING 800x512 CHECKING 1920x1200 CHECKING 960x600 CHECKING 1920x1440 CHECKING 960x720 CHECKING 2048x1536 CHECKING 1024x768 CHECKING 2048x1536 CHECKING 1024x768 CHECKING 2048x1536 CHECKING 1024x768 (II) I810(0): 37608 kBytes additional video memory is required to enable tiling mode for DRI. (II) I810(0): 16100 kBytes additional video memory is required to enable DRI. (II) I810(0): Disabling DRI. (--) I810(0): Virtual size is 1600x1200 (pitch 1600) (**) I810(0): Built-in mode "1280x1024" (**) I810(0): Built-in mode "1024x768" (**) I810(0): Built-in mode "800x600" (**) I810(0): Built-in mode "640x480" Setting clock 108.00MHz, closest is 0.00MHz (II) I810(0): Attempting to use 60.02Hz refresh for mode "1280x1024" (858) Video Modeline: ID: 0x858 Name: 1280x1024 1280 1328 1440 1688 - 1024 1025 1028 1066 108.00 MHz Refresh: 60.01 Hz Setting clock 94.50MHz, closest is 0.00MHz (II) I810(0): Attempting to use 85.00Hz refresh for mode "1024x768" (854) Video Modeline: ID: 0x854 Name: 1024x768 1024 1072 1168 1376 - 768 769 772 808 94.50 MHz Refresh: 84.99 Hz Setting clock 56.30MHz, closest is 0.00MHz (II) I810(0): Attempting to use 85.14Hz refresh for mode "800x600" (852) Video Modeline: ID: 0x852 Name: 800x600 800 832 896 1048 - 600 601 604 631 56.30 MHz Refresh: 85.13 Hz Setting clock 36.00MHz, closest is 0.00MHz (II) I810(0): Attempting to use 85.01Hz refresh for mode "640x480" (850) Video Modeline: ID: 0x850 Name: 640x480 640 696 752 832 - 480 481 484 509 36.00 MHz Refresh: 85.00 Hz (--) I810(0): Display dimensions: (700, 400) mm (--) I810(0): DPI set to (58, 76) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.2 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.2.0 ABI class: X.Org Video Driver, version 0.7 (==) I810(0): VBE Restore workaround: enabled. (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xdff40000 - 0xdff7ffff (0x40000) MS[B] [1] 0 0 0xf0000000 - 0xf7ffffff (0x8000000) MS[B] [2] 0 0 0xdff80000 - 0xdfffffff (0x80000) MS[B] [3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [8] -1 0 0xdfaff000 - 0xdfafffff (0x1000) MX[B] [9] -1 0 0xdfafe000 - 0xdfafefff (0x1000) MX[B] [10] -1 0 0xdfdf0000 - 0xdfdfffff (0x10000) MX[B] [11] -1 0 0xdff3fc00 - 0xdff3ffff (0x400) MX[B] [12] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[B] [13] -1 0 0xdff40000 - 0xdff7ffff (0x40000) MX[B](B) [14] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) [15] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[B](B) [16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [19] 0 0 0x0000ecd8 - 0x0000ecdf (0x8) IS[B] [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [22] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] [23] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [24] -1 0 0x0000d440 - 0x0000d47f (0x40) IX[B] [25] -1 0 0x0000d480 - 0x0000d4ff (0x80) IX[B] [26] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[B] [27] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[B] [28] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[B] [29] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[B] [30] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[B] [31] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[B] [32] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [33] -1 0 0x00000374 - 0x00000374 (0x1) IX[B] [34] -1 0 0x00000170 - 0x00000170 (0x1) IX[B] [35] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B] [36] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [37] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[B] [38] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[B] [39] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[B] [40] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[B] [41] -1 0 0x0000ecd8 - 0x0000ecdf (0x8) IX[B](B) [42] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [43] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a (II) I810(0): initializing int10 (WW) I810(0): Bad V_BIOS checksum (II) I810(0): Primary V_BIOS segment is: 0xc000 (II) I810(0): VESA BIOS detected (II) I810(0): VESA VBE Version 3.0 (II) I810(0): VESA VBE Total Mem: 7872 kB (II) I810(0): VESA VBE OEM: Intel(r)CopperRiver Graphics Chip Accelerated VGA BIOS (II) I810(0): VESA VBE OEM Software Rev: 1.0 (II) I810(0): VESA VBE OEM Vendor: Intel Corporation (II) I810(0): VESA VBE OEM Product: Intel(r)CopperRiver Graphics Controller (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (--) I810(0): Xv is disabled because it needs 2D accel and AGPGART. (II) I810(0): Allocated 128 kB for the ring buffer at 0x0 (II) I810(0): Allocating at least 65 scanlines for pixmap cache (II) I810(0): Initial framebuffer allocation size: 7908 kByte (II) I810(0): Allocated 16 kB for the scratch buffer at 0x7db000 (II) I810(0): Updated framebuffer allocation size from 7908 to 7912 kByte (II) I810(0): Updated pixmap cache from 65 scanlines to 66 scanlines (II) I810(0): 0xa058690: Memory at offset 0x00020000, size 7912 kBytes (II) I810(0): 0x9f0d4b0: Memory at offset 0x00000000, size 0 kBytes (II) I810(0): 0x9f7ae58: Memory at offset 0x00000000, size 0 kBytes (II) I810(0): 0x9f7b084: Memory at offset 0x00000000, size 128 kBytes (II) I810(0): 0xa0586d0: Memory at offset 0x007db000, size 16 kBytes (==) I810(0): Write-combining range (0xf0000000,0x8000000) (II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (WW) I810(0): Extended BIOS function 0x5f05 failed. Set640x480 (0xc050) Succeeded (WW) I810(0): PGTBL_ER is 0x00000010 (II) I810(0): Setting refresh with VBE 3 method. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): Mode bandwidth is 78 Mpixel/s (WW) I810(0): Extended BIOS function 0x5f28 not supported. (II) I810(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Horizontal and Vertical Lines Offscreen Pixmaps Setting up tile and stipple cache: 13 64x66 slots (==) I810(0): Backing store disabled (==) I810(0): Silken mouse enabled (II) I810(0): Initializing SW Cursor! (II) I810(0): direct rendering: Disabled (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (**) Option "Protocol" "IMPS/2" (**) Mouse0: Device: "/dev/input/mice" (**) Mouse0: Protocol: "IMPS/2" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/input/mice" (**) Option "Emulate3Buttons" "yes" (**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: Buttons: 5 (**) Option "CoreKeyboard" (**) Keyboard0: Core Keyboard (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard0: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Keyboard0: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) Keyboard0: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (II) Mouse0: ps2EnableDataReporting: succeeded AUDIT: Thu Aug 25 10:15:21 2005: 7874 X: client 7 rejected from local host (WW) I810(0): Successfully set original devices (WW) I810(0): Setting the original video mode instead of restoring the saved state (WW) I810(0): Extended BIOS function 0x5f05 failed. (II) I810(0): BIOS call 0x5f05 not supported, setting refresh with VBE 3 method. (WW) I810(0): Successfully set original devices (2) # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" # RgbPath is the location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" EndSection Section "Module" Load "dbe" Load "extmod" Load "fbdevhw" Load "glx" Load "record" Load "freetype" Load "type1" Load "dri" EndSection Section "InputDevice" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # Or if you just want both to be control, use: # Option "XkbOptions" "ctrl:nocaps" # Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "yes" EndSection Section "Monitor" Identifier "Monitor0" VendorName "VIZ" ModelName "VIZIO L32" HorizSync 31-70 VertRefresh 50-85 Mode "1366x768" # vfreq 59.815Hz, hfreq 47.553kHz DotClock 85.500000 HTimings 1366 1494 1624 1798 VTimings 768 770 776 795 Flags "-HSync" "+VSync" EndMode EndSection Section "Device" Identifier "Videocard0" Driver "i810" #Driver "vesa" VendorName "Videocard vendor" BoardName "VESA driver (generic)" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" #Viewport 0 0 Depth 24 Modes "1366x768" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection

4 3

Wma and GS streamer.
by duffmckagan 25 Aug '05

25 Aug '05

How do I add Wma support to my Cent OS 4 distribution? I would also like to have GS streamer installed. Thank you. -- "No-one dies a virgin. Life screws everyone."

1 0

Fw: [CentOS] FTP timout
by Abd El-Hameed Ayad 25 Aug '05

25 Aug '05

Thank you very much. I had turned firewall OFF and it is working. > ----- Original Message ----- > From: "Greg Knaddison" <greg.knaddison(a)gmail.com> > To: "CentOS mailing list" <centos(a)centos.org> > Sent: Wednesday, August 24, 2005 4:17 PM > Subject: Re: [CentOS] FTP timout > > > On 8/24/05, Abd El-Hameed Ayad <hamid(a)use-trade.com> wrote: >> One of the servers is vsftpd & the other is pure-ftpd >> if i logged to server running vsftpd and tried to download any file, i >> can >> do that without problems regardless the size of the file. >> But if i logged to the server running pure-ftpd & tried to upload the >> same >> file, i get the time out message "Note here: The timeout always happens >> after the file completely uploaded, the ftp client hangs then gives the >> timeout message " >> >> Also, If i logged to the server running pure-ftpd, i can use ftp command >> to >> download any file from vsftpd server but i can't upload the same file >> back >> to the server if this file size is big >> >> Do you think that i should edit the configuration file for pure-ftd or >> vsftpd? If yes, Which parameter i should change >> > > This sounds to me like a proxy/firewall problem, not an FTP > configuration problem. My money says that the pure-ftpd box is behind > a proxy/firewall that is checking to make sure that your ftp session > is alive and at some point it says "no, I don't think it is" and it > starts dropping packets. I only say that because I've seen the same > problem and it turned out to be firewall config. > > Maybe you could create an ssh tunnel for your ftp send send it over > that and see if you get any difference. > > Greg > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos > >

2 1

Unable to handle kernel paging request at virtual address
by Tom 25 Aug '05

25 Aug '05

Hi, I had centos 3.4 machine freeze up last nite with the following lines in the log. (no other messages) Aug 25 04:02:11 host5 kernel: Unable to handle kernel paging request at virtual address 8395ac20 Aug 25 04:02:11 host5 kernel: printing eip: Aug 25 04:02:11 host5 kernel: c016d071 Aug 25 08:25:17 host5 syslogd 1.4.1: restart. google produces a lot of these messages with varying reasons but all different error numbers (none with the number above) does anyone know what may have caused this? regards tom

1 0

Re: MailScanner and SpamAssassin
by James B. Byrne 25 Aug '05

25 Aug '05

Well I found out where to make the necessary settings: /etc/MailScanner/rules/spam.whitelist.rules You cannot get there from webmin. Regards, Jim -- *** e-mail is NOT a secure channel *** James B. Byrne mailto:ByrneJB.<token>@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3CE delivery <token> = hal

2 1

Caching nameserver
by William Warren 24 Aug '05

24 Aug '05

I am having some issue with setting up a caching nameserver. here's the link: http://www.centos.org/modules/newbb/viewtopic.php?topic_id=150&forum=10&pos… the OS is now CentOS4 -- My "Foundation" verse: Isa 54:17 No weapon that is formed against thee shall prosper; and every tongue that shall rise against thee in judgment thou shalt condemn. This is the heritage of the servants of the LORD, and their righteousness is of me, saith the LORD. -- carpe ductum -- "Grab the tape" CDTT (Certified Duct Tape Technician) Linux user #322099 Machines: 206822 256638 276825 http://counter.li.org/

15 84

xorg reconfigure display how
by Jerry Geis 24 Aug '05

24 Aug '05

Hi, I am trying to configure my X. I have a completely differnet monitor. The old command was XFree86 -configure. I tried Xorg -configure and it is not found. I need to be able to see the selections on the screen. I tried system-config-display --reconfig and that works but I it selects the VESA generic. I need the list of display choices like it used to present. Where is that under centos??? THanks so much.. Jerry

2 1

dual xeon
by Joeffrey Betita 24 Aug '05

24 Aug '05

hello people we will be buying dual xeon processor for our server what iso image should i download? thank you very much.

8 8

named is up but does not respond to queries
by Arun K. Khan 24 Aug '05

24 Aug '05

CentOS 4.1/bind-9.2.4-2. I have named serving as a cache DNS server plus SOA for a local intranet zone. The problem I am encountering - over a period of time it stops responding to queries. nmap scan from a different host shows port 53 is visible. I can telnet to the port but all queries to server time out. So much so that "service named status" and "service named restart" hang. I have to manually kill the named process before I am able to start named again (I do remove the lock/pid files manually as well). This has occurred about 4 times since I installed CentOS 4.1 4 weeks ago. I have not encountered any problem with other services running on the same server. I looked through /var/log/messages and did not find any errors logged by named. I'd appreciate any thoughts/suggestions to debug this problem. Here is what I have tried so far to figure out the problem: (from 192.168.1.150) $ host www.yahoo.com 192.168.1.21 ;; connection timed out; no servers could be reached # nmapfe of 192.168.1.21 (from 192.168.1.150) (The 1208 ports scanned but not shown below are in state: closed) PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 53/tcp open domain (ssh'd into named server using IP# 192.168.1.21) # service named status rndc: recv failed: operation canceled TIA, -- Arun Khan Linux is like a wigwam - no gates, no windows, apache inside

5 6

Server freeze
by Hugo Perez Casanova 24 Aug '05

24 Aug '05

Hi all. Two days ago a server got freezed, not responding at console or by LAN. I noticed both caps lock and scroll lock LEDs at the keyboard flashing. I think this could be a hardware problem, but I don't recall where I read about this flashing indicators. The hardware is an Intel based white box PC running CentOS 3.5 fully updated. Anybody knows what the flashing LEDs means? Regards.

5 7

php help please
by Melinda Odom 24 Aug '05

24 Aug '05

Hi, My system uses CentOS 3.5 plus Plesk 7.5.3 reloaded for the server administration for customers. Qmail is the MTA. A couple of days ago I ran yum list updates and there were these packages to update: php i386 4.3.2-25.ent.centos.1 update php-imap i386 4.3.2-25.ent.centos.1 update php-mysql i386 4.3.2-25.ent.centos.1 update php-pgsql i386 4.3.2-25.ent.centos.1 update When I ran yum update they all updated and seemed like everything was fine. Then I found out that all of my ecommerce stores using osCommerce had an error in the admin that could not send mail and it seemed to be isolated to the admin until I tried to put an order through on my test store and other live stores where the same error showed up while trying to checkout so nobody could check out or order anything. This is the error: Fatal error: Call to undefined function: mail() in /home/httpd/vhosts/domain.com/httpdocs/admin/includes/classes/email.php on line 502 The server support people eventually put back those php listings to php-4.3.2-24.ent to solve the problem so people could shop. In the meantime the php.ini file had a listing in it called: ; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). sendmail_path = /usr/sbin/sendmail -t -i which was used with php-4.3.2-24 was changed to: ; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). sendmail_path = /var/qmail/bin/sendmail -t -i when it was updated to php-4.3.2-25 Now that the server is back using php-4.3.2-24 the listing is: ; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). sendmail_path = /var/qmail/bin/sendmail -t -i I have left this as is for the moment. ================================= ================================= Further, support said the reason the yum update caused these problems was because there were no mail extensions in the php updates so they put this line in the yum.conf to keep further conflicts that may arise with Plesk: exclude=mod_ssl* httpd* perl mysql* php* For nearly a year I have been doing yum updates without any line like this in the yum.conf file and am now afraid to run any security updates if my ecommerce stores are going to stop working. Plesk says in any of their updates to check and see if you have this program or better which I have always had a better version than what they suggest on the server. ================================= ================================= Also, in the /etc/redhat-release file I have had this listing from the beginning in it so I could use the Plesk updater within the Plesk server admin area: Red Hat Enterprise Linux ES release 3 (Taroon Update 4) The server support people are now telling me to put it to CentOS which I have been asking them about this for months now and only now are they telling me this: CentOS release 3.4 (final) This setting causes the Plesk updater within the Plesk server admin area to have this error so I cannot use this listed as is: Error: You are using CentOS Linux 2.2, but autoinstaller was compiled for RedHat Enterprise Linux 3. Exiting autoinstaller... ================================= Is this line, exclude=mod_ssl* httpd* perl mysql* php* really suppose to be in the yum.conf file? Since Plesk supports CentOS 3.3 and Redhat Enterprise 3 should I be able to update mod_ssl, httpd, perl mysql, and php via yum update without these problems I would think? There is only one problem that is happening now and it is just on my personal domain with my test osCommerce store...I get the order and contact emails but when I log into the admin to send a status email from the orders/edit section the email never hits the server using "tail" to watch for it and I never get the email. However, I can put an order through one of my other store sites and use this order/edit status email function and get the email all the time so this problem is specific to my personal domain only with a fresh install of the osCommerce store so don't understand this at all. I hope I have posted the information necessary and that someone can help me. Thank you. Sincerely, Melinda Odom www.designhosting.biz 479-471-0891 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.338 / Virus Database: 267.10.15/80 - Release Date: 8/23/2005

1 0

Has anyone got dvd::rip to work in CentOS?
by Dave Gutteridge 24 Aug '05

24 Aug '05

I feel like Im chasing my own tail round and round in trying to install dvd::rip. Installing the RPM just gets me lost in a world of dependancies. I tried installing manually and all I get is the following: [dave@localhost ~]$ /usr/bin/dvdrip Can't locate Locale/TextDomain.pm in @INC (@INC contains: lib /usr/lib/perl5/5.8.5/i386-linux-thread-multi... ... and it goes on and on. By chance has anyone installed this successfully? Dave

17 74

FTP timout
by Abd El-Hameed Ayad 24 Aug '05

24 Aug '05

Hi all, I have 2 CentOS 3.5 boxes & i do backups on the LAN Recently, I always get FTP timout error with large files "700 MB and more" . i tried to log and do manual backup with FTP command and i also got the same result "FTP timeout" i tried to google and i did # modprobe ip_conntrack_ftp but still get the same timeout message Any one can help??? Hameed

3 4

CentOS-announce Digest, Vol 6, Issue 12
by centos-announce-request＠centos.org 24 Aug '05

24 Aug '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2005:755-01: Critical CentOS 2 i386 elm security update (John Newbigin) ---------------------------------------------------------------------- Message: 1 Date: Wed, 24 Aug 2005 09:10:58 +1000 From: John Newbigin <jnewbigin(a)ict.swin.edu.au> Subject: [CentOS-announce] CESA-2005:755-01: Critical CentOS 2 i386 elm security update To: centos-announce(a)centos.org Message-ID: <430BAD02.8050102(a)ict.swin.edu.au> Content-Type: text/plain; charset=us-ascii; format=flowed The following errata for CentOS-2 have been built and uploaded to the centos mirror: RHSA-2005:755-01 Critical: elm security update Files available: elm-2.5.6-6.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin Computer Systems Officer Faculty of Information and Communication Technologies Swinburne University of Technology Melbourne, Australia http://www.ict.swin.edu.au/staff/jnewbigin ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 6, Issue 12 **********************************************

1 0

Re: [CentOS] OT: BIOS upgrades and booting without a floppy drive
by David Thompson 24 Aug '05

24 Aug '05

Bart Schaefer wrote: >I see there's a D865GBF BIOS upgrade on the Intel site, dating from >May. Problem is it comes only as either a Windows installer, or a >bootable floppy -- and not only does this machine not have a floppy >drive, but the case configuration is such that the DVD-ROM drive >blocks access to the floppy connector on the motherboard, so I'm >looking at minor surgery just to stick one in temporarily. > >Is there any clever way around this? Some way to make a bootable CD >from the floppy image, for example? Or must I grit my teeth and bring >out the screwdrivers? If you're set up to do PXE, you can boot a floppy image over the network via PXELINUX/MEMDISK and get rid of the physical media altogether. http://syslinux.zytor.com/pxe.php Dave Thompson UW-Madison

2 1

logrotate broken on 4.1
by scott.list 24 Aug '05

24 Aug '05

Hi all: logrotate is broken on my stock 4.1 install. After hunting and hunting I found there is a bug filed with Redhat on the issue. logrotate fails becasue my /tmp partition is mounted noexec. I understand it is that way for security reasons. The box in question is on a dedicated hosting site and that's the way it was handed off to me, built. Some said setting TMPDIR=/var/tmp;export TMPDIR would fix it. My /var/tmp is not on a noexec partition so I'm good there. Setting TMPDIR however does not fix it. I've tried adding the variable in /etc/cron.daily/logrotate, I tried it after a prerotate inside the actual syslog logrotate file, netiher worked. I finally had to remount /tmp and remove the noexec. I have the stock 4.1 logrotate, I understand some later versions *may* address the TMPDIR but I hate to start straying off the stock/stable path since the main reason I am running Centos4.1 is to have a stable server platform that is maintained via yum update alone. Has anyone fixed this on 4.1? Or have a workaround besides setting /tmp to exec or changing logrotate versions? Thanks, Soctt

2 1

xfs module not loading
by Fong Vang 24 Aug '05

24 Aug '05

I'm trying to add XFS and ReiserFS to CentOS, integrating with Kickstart. I think I'm fairly close. I've added xfs.ko and reiserfs.ko to modules.cgz in initrd. Several of my partitions now specify --fstype=xfs. I can see tty5 mkfs.xfs is creating the XFS file systems. The system currently installs completely via kickstart, but it does not mount the XFS file systems while in the kick process. /mnt/sysimage/etc/fstab is populated correctly. In tty2, lsmod does not show that the xfs module is loaded (ext3 is in the list). I tried loading it manually with modprobe and insmod but I don't think it's loading (no error message at all -- no error). BTW, as with Fedora, I also specified 'xfs' as an option to syslinux/pxelinux. What else am I missing? Thanks for any help.

3 13

Arial font missing for openoffice 1.9+ SOLVED
by Jerry Geis 24 Aug '05

24 Aug '05

Fantastic - thanks, Does this help ... http://corefonts.sourceforge.net/ ? Regards, .sha Jerry Geis wrote: >/ I am trying to run ooimpress for openoffice 1.9+ />/ I have it installed and running but the powerpoint I loaded has />/ an arial font selected and that font does not seem to be />/ present in centos 4 . />/ />/ How can I put it there for openoffice to use.. />/ />/ THanks />/ />/ Jerry /

1 0

mount.cifs and UID mapping
by Petr Fischer 24 Aug '05

24 Aug '05

Hi! I have mounted samba disk with mount.cifs (smbmount has problems with codepage [Czech] - I can't use it). How do I map the server UID/GID to client UID/GID? (I can't have the same UIDs/GIDs on all computers.) Classic mount parameters uid/gid can't be used if "CIFS Unix extensions" are used on Samba server. Google has not answered my questions (maybe I asked wrong). Thanks, pf

1 0

yum issues
by William Warren 23 Aug '05

23 Aug '05

I hve two different boxes. One runs the updates to vim jsut fine. the other throws --> Populating transaction set with selected packages. Please wait. ---> Downloading header for sudo to pack into transaction set. sudo-1.6.7p5-30.1.1.i386. 100% |=========================| 161 kB 00:00 http://mirror.centos.org/centos/4/updates/i386/RPMS/sudo-1.6.7p5-30.1.1.i38…: [Errno -1] Header is not complete. Trying other mirror. Error: failure: RPMS/sudo-1.6.7p5-30.1.1.i386.rpm from update: [Errno 256] No more mirrors to try. They bypass my local http prxy. Any ideas? -- My "Foundation" verse: Isa 54:17 No weapon that is formed against thee shall prosper; and every tongue that shall rise against thee in judgment thou shalt condemn. This is the heritage of the servants of the LORD, and their righteousness is of me, saith the LORD. -- carpe ductum -- "Grab the tape" CDTT (Certified Duct Tape Technician) Linux user #322099 Machines: 206822 256638 276825 http://counter.li.org/

3 12

Where do my RPMs actually go, and is it different for Red Hat builds?
by Dave Gutteridge 23 Aug '05

23 Aug '05

I'm trying to install themes for KDE. In doing so, I came across the following web site which seems to have the themes I want as RPMs: http://rpm.pbone.net/index.php3/stat/17/dept/3/idg/User+Interface_Desktop The theme I want is called "Thinkeramik", and it has the following versions, for various Red Hat builds: thinkeramik-3.2.1-1.0.el3.kde.i386.rpm RedHat EL 3 thinkeramik-3.2.1-1.0.el4.kde.i386.rpm RedHat EL 4 thinkeramik-3.2.1-1.0.fc2.kde.i386.rpm Fedora 2 thinkeramik-3.2.1-1.0.fc3.kde.i386.rpm Fedora 3 thinkeramik-3.2.1-1.0.fc4.kde.i386.rpm Fedora 4 thinkeramik-3.2.1-1.0.rh73.kde.i386.rpm RedHat 7.X thinkeramik-3.2.1-1.0.rh90.kde.i386.rpm RedHat 9 I've read on this list that CentOS is equal to Red Hat 9, or to Red Hat EL 4. So I'm not sure which download I should get, or which is better. But in any case, I tried both Red Hat 9 and Red Hat EL 4. In either case, when I click to download (in FireFox), I'm given the option to install, so I do, and I enter my root password. It all seems to go fine, without errors. If I go to the command prompt and query the existence of the RPM, it's there: [root@localhost dave]# rpm -q thinkeramik thinkeramik-3.2.1-1.0.rh90.kde Then I go to the KDE Theme Manager in the Control Center, and here's where I hit the wall. The theme "Thinkeramik" is not automatically listed as one of the themes, so I click to "Install New Theme...". But I have no idea where to look. The RPM has been isntalled... somewhere, but I have no idea what directory to look in. I looked on Google to try and figure out if there was an option with the rpm command to locate the files associated with the RPM package, but was unsuccessful. Where should I look for the theme related files that the RPM should have theoretically installed? Dave

6 9

Arial font missing for openoffice 1.9+
by Jerry Geis 23 Aug '05

23 Aug '05

I am trying to run ooimpress for openoffice 1.9+ I have it installed and running but the powerpoint I loaded has an arial font selected and that font does not seem to be present in centos 4 . How can I put it there for openoffice to use.. THanks Jerry

2 1

64 bit hardware and filesystem size limit
by Sean Staats 23 Aug '05

23 Aug '05

We recently bought a 32-bit Xeon system with a 12-port 3Ware RAID card and a dozen 500GB drives. We wanted to create 4TB drive arrays; however, we soon discovered that there is about a 2.2TB drive array size limit on 32-bit hardware. Does that sound correct? Would replacing the 32-bit mobo/cpu with a 64-bit mobo/cpu allow us to use drive arrays larger than 2.2TB? Thanks.

4 6

KDE screensaver on Centos 4.1
by BRUCE STANLEY 23 Aug '05

23 Aug '05

The KDE screen savers will only blank out the screen though most of them test ok when you hit the test button in the Control Center. The Gnome screen savers work ok. My system has a Radeon 9200SE video card and I have a ViewSonic A70f monitor. Does anyone have a fix for this?

6 17

Help.I can't start with my new kernel.
by cpp fire 23 Aug '05

23 Aug '05

Hello!Eveyone! I'm a new user to CentOS. I builded a new kernel(2.6.12) yesteray with these command: #make defconfig #make menuconfig #make #make modules #make modules_install #make install #reboot ... But,when I choose the new kernel,it stop with "kernel panic". When building the kernel,I choose ext3 with "y".My hard disk is IDE,so I choose the IDE support. I don't know what's wrong. I met the same problem on FC4.But,I can build a new kernel on Debian successfully,using these commands. Please help me. :-( ___________________________________________________________ 雅虎免费G邮箱－中国第一绝无垃圾邮件骚扰超大邮箱 http://cn.mail.yahoo.com

4 6

kbs-CentOS Dependency Problems
by Phil Schaffner 23 Aug '05

23 Aug '05

There seem to be some inconsistencies in the kbs-CentOS repository: [root@tabb1 ~]# yum update Setting up Update Process Setting up Repos kbs-CentOS-Extras 100% |=========================| 951 B 00:00 kbs-CentOS-Misc 100% |=========================| 951 B 00:00 update 100% |=========================| 951 B 00:00 base 100% |=========================| 1.1 kB 00:00 centosplus 100% |=========================| 951 B 00:00 addons 100% |=========================| 951 B 00:00 extras 100% |=========================| 1.1 kB 00:00 Reading repository metadata in from local files kbs-CentOS: ################################################## 1402/1402 kbs-CentOS: ################################################## 60/60 update : ################################################## 116/116 base : ################################################## 1406/1406 centosplus: ################################################## 81/81 extras : ################################################## 32/32 Resolving Dependencies --> Populating transaction set with selected packages. Please wait. ---> Package libcddb.i386 0:1.2.0-3.el4.kb set to be updated ---> Package ginac.i386 0:1.3.2-1.el4.kb set to be updated --> Running transaction check --> Processing Dependency: libcdio.so.5 for package: libcddb --> Processing Dependency: libginac-1.3.so.0 for package: octave-forge --> Processing Dependency: libcdio.so.5(CDIO_5) for package: libcddb --> Finished Dependency Resolution Error: Missing Dependency: libcdio.so.5 is needed by package libcddb Error: Missing Dependency: libginac-1.3.so.0 is needed by package octave-forge Error: Missing Dependency: libcdio.so.5(CDIO_5) is needed by package libcddb [root@tabb1 ~]# rpm -q libcddb ginac libcdio octave-forge libcddb-0.9.4-2 package ginac is not installed libcdio-0.75-3.el4.kb octave-forge-2004.11.16-8.el4.kb [root@tabb1 ~]# rpm -q GiNaC GiNaC-1.3.1-6.el4.kb Would be glad to supply any additional information required to debug. Any help appreciated. [Given recent discussions, should mention that I have used Dag, Dries, and ATrpms EL4 (but not FCx) repos but they don't SEEM to be factors here.] Thanks, Phil

2 2

CentOS-announce Digest, Vol 6, Issue 11
by centos-announce-request＠centos.org 23 Aug '05

23 Aug '05

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2005:743 Low CentOS 4 ia64 netpbm - security update (Pasi Pirhonen) 2. CESA-2005:745 Low CentOS 4 ia64 vim - security update (Pasi Pirhonen) 3. CESA-2005:745 Low CentOS 3 ia64 vim - security update (Pasi Pirhonen) 4. CESA-2005:745 Low CentOS 4 ia64 vim - security update (Pasi Pirhonen) 5. CESA-2005:743 Low CentOS 4 i386 netpbm - security update (Johnny Hughes) 6. CESA-2005:743 Low CentOS 4 x86_64 netpbm - security update (Johnny Hughes) 7. CESA-2005:745 Low CentOS 4 x86_64 vim - security update (Johnny Hughes) 8. CESA-2005:745 Low CentOS 4 i386 vim - security update (Johnny Hughes) 9. CESA-2005:743-01: Low CentOS 2 i386 netpbm security update (John Newbigin) 10. CESA-2005:745-01: Low CentOS 2 i386 vim security update (John Newbigin) 11. CESA-2005:747-02: Low CentOS 2 i386 slocate security update (John Newbigin) 12. CESA-2005:743 Low CentOS 3 i386 netpbm - security update (seth vidal) 13. CESA-2005:743 Low CentOS 3 x86_64 netpbm - security update (seth vidal) 14. CESA-2005:745 Low CentOS 3 x86_64 vim - security update (seth vidal) 15. CESA-2005:745 Low CentOS 3 i386 vim - security update (seth vidal) 16. CESA-2005:745 Low CentOS 3 s390(x) vim - security update (Pasi Pirhonen) 17. CESA-2005:743 Low CentOS 3 s390(x) netpbm - security update (Pasi Pirhonen) 18. CESA-2005:743 Low CentOS 4 s390(x) netpbm - security update (Pasi Pirhonen) 19. CESA-2005:745 Low CentOS 4 s390(x) vim - security update (Pasi Pirhonen) ---------------------------------------------------------------------- Message: 1 Date: Mon, 22 Aug 2005 18:16:50 +0300 From: Pasi Pirhonen <upi(a)papat.org> Subject: [CentOS-announce] CESA-2005:743 Low CentOS 4 ia64 netpbm - security update To: centos-announce(a)centos.org Message-ID: <20050822151650.GS22588(a)core.upi.iki.fi> Content-Type: text/plain; charset="us-ascii" CentOS Errata and Security Advisory 2005:743 https://rhn.redhat.com/errata/RHSA-2005-743.html The following updated files have been uploaded and are currently syncing to the mirrors: files: updates/ia64/RPMS/netpbm-10.25-2.EL4.1.ia64.rpm updates/ia64/RPMS/netpbm-devel-10.25-2.EL4.1.ia64.rpm updates/ia64/RPMS/netpbm-progs-10.25-2.EL4.1.ia64.rpm -- Pasi Pirhonen - upi(a)iki.fi - http://iki.fi/upi/

1 0

CentOS 4.1 yum update just hangs
by Robin Mordasiewicz 23 Aug '05

23 Aug '05

After installing 4.1, and running yum clean all yum list yum update It hangs at the point <snip> (52/57): cups-libs-1.1.22 100% |=========================| 109 kB 00:00 (53/57): bzip2-devel-1.0. 100% |=========================| 35 kB 00:00 (54/57): kdelibs-3.3.1-3. 100% |=========================| 15 MB 00:00 (55/57): zlib-devel-1.2.1 100% |=========================| 94 kB 00:00 (56/57): mod_ssl-2.0.52-1 100% |=========================| 100 kB 00:00 (57/57): fetchmail-6.2.5- 100% |=========================| 581 kB 00:00 Running Transaction Test </snip> It just sits there. I can ping the box, but I cannot ssh to the box. I can not log into the console either.

9 22

Re: [CentOS] associate .php file with php
by David Thompson 23 Aug '05

23 Aug '05

"Jeff Stacey" wrote: >put > >#!/usr/bin/php > >at the top of your php script. ...and be sure the file is executable (mode 755 or similar). Dave Thompson

3 3

Kickstart BOOT kernel
by Fong Vang 23 Aug '05

23 Aug '05

Could someone tell me how the kernel used for kickstart (called the BOOT kernel in RH 9 days) is created? How does one generate this kernel using rpmbuild of the src rpm? I'm just trying to undertstand the differences. Thanks for any help.

2 1

OT: BIOS upgrades and booting without a floppy drive
by Bart Schaefer 23 Aug '05

23 Aug '05

I've got a machine running CentOS 3.5 with an Intel D865GBF motherboard and I've been having an occasional "event" where disk-intensive activity (such as running "yum check-update" or starting up OpenOffice) causes the load average to spike and X11 to become unresponsive (as in, the pointer won't even track the mouse) for a few seconds. The machine always recovers and returns to normal, but it's getting a bit annoying. I saw one thread in which the suggested solution for a vaguely similar problem was to switch from the SMP kernel with hyperthreading to the UP kernel, but that hasn't made much difference. Then I saw Dave G's recent thread in which a more severe yum-related lockup was solved with a BIOS upgrade. I see there's a D865GBF BIOS upgrade on the Intel site, dating from May. Problem is it comes only as either a Windows installer, or a bootable floppy -- and not only does this machine not have a floppy drive, but the case configuration is such that the DVD-ROM drive blocks access to the floppy connector on the motherboard, so I'm looking at minor surgery just to stick one in temporarily. Is there any clever way around this? Some way to make a bootable CD from the floppy image, for example? Or must I grit my teeth and bring out the screwdrivers?

3 2

RE: [CentOS] 64 bit hardware and filesystem size limit
by Cletus Murphy 23 Aug '05

23 Aug '05

> On Mon, 2005-08-22 at 17:35 -0500, Sean Staats wrote: > > We recently bought a 32-bit Xeon system with a 12-port > 3Ware RAID card > > and a dozen 500GB drives. We wanted to create 4TB drive arrays; > > however, we soon discovered that there is about a 2.2TB > drive array size > > limit on 32-bit hardware. Does that sound correct? > > Yes, 2^40 = 2TiB ~ 2.2TB (2.2 * 10^12). This is a PC geometry issue, > although Linux can get around it. > > > Would replacing the 32-bit mobo/cpu with a 64-bit mobo/cpu > allow us to > > use drive arrays larger than 2.2TB? > > Actually it's a 3Ware question because 3Ware has an > intelligent ASIC on- > board. It's driving the disk array, not Linux. It's merely > presenting > the disk array as a block, and Linux talks to the ASIC, not the disks. > > > > -- > Bryan J. Smith b.j.smith(a)ieee.org http://thebs413.blogspot.com > ---------------------------------------------------------------------- > The best things in life are NOT free - which is why life is easiest if > you save all the bills until you can share them with the perfect woman If you are running the latest 2.6 kernel you will not have this limitation. Also - make sure you have the latest 3ware firmware/driver. /dev/sdb1 3.7T 2.2T 1.6T 59% /data Linux storage1.******.com 2.6.11.12 #1 Mon Jun 20 10:40:15 PDT 2005 i686 i686 i386 GNU/Linux Don't use ext2 or ext3 as your fs. Take a look at http://www.3ware.com/kb/article.aspx?id=11920 as well. --

3 6

Need a little kick start to compile appletalk module
by Craig White 22 Aug '05

22 Aug '05

RHEL 4 (and thus CentOS 4) do not have appletalk module included. CentOSPlus rather thoughtfully has the 'unsupported' version which would have the appletalk module but I have been unable to get the old megaraid driver to run compiled from the kernel-devel for these 'unsupported' kernels. Thus I would love to simply compile the appletalk module myself from the standard kernel-devel for the standard i686/i686smp kernels as I have to do for the old megaraid driver. Thus it would appear, that I would need the kernel source for this. How would I 'isolate' the appletalk kernel stuff? Would I install the kernel-sourcecode rpm - like... <http://centos.cs.ucr.edu/centos/4.1/os/i386/CentOS/RPMS/kernel- sourcecode-2.6.9-11.EL.noarch.rpm> and hunt down the appletalk directory and compile the module separately pretty much as I do with the older megaraid code? Is it reasonable to hope that the necessary code for the appletalk kernel module would be contained in one subdirectory? Is there an easier way that I am missing? Craig

3 4

YUM is seriously fubar
by Dave Gutteridge 22 Aug '05

22 Aug '05

Okay, I have over 9 gigs of spare room on my main hard drive, so I don't think var is filling up. I've set prelinking to be off (I think), and yet still, YUM continues to freeze my computer. If I try to do a search or install, about half the time it will go nuts on the hard drive, I lose control of the mouse, and eventually I have no choice but to hard reset. What's wrong with YUM? Dave

5 10

SRC ISO
by Fong Vang 22 Aug '05

22 Aug '05

Where could we download all the src rpms as an ISO for Centos 4.1?

2 1

automount nfs
by Rick Philbrick 22 Aug '05

22 Aug '05

Hi, The NFS mount points I have setup keep getting their ownership changed to root. Is there an option, perhaps in the auto.misc/ auto.master files, to set to preserve or set the ownership of the mount points?? Thanks in advance- RIckp

1 0

Re: [CentOS] associate .php file with php
by Jeff Stacey 22 Aug '05

22 Aug '05

put #!/usr/bin/php at the top of your php script. * Jeff >>> mikerocks65(a)yahoo.com 8/22/2005 12:33 PM >>> My php scripts will only run from bash if I run php followed by the script name. Some how I remember having had this setup where it would recognize it was a php file by just running the script itself ex - scriptname.php. Can someone refresh my memory to tell me what I need to change so it runs just by typing the script name? thx centos 3.5 __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

Entries in /var/log/messages
by Jerry Geis 22 Aug '05

22 Aug '05

I have quite a few entries in /var/log/messages for connection attempts. Is there anything other than ignoring them I can do? Example is below. Aug 21 15:48:19 machine sshd(pam_unix)[17903]: check pass; user unknown Aug 21 15:48:19 machine sshd(pam_unix)[17903]: authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=wsip-24-234-149-156.lv.lv.cox.net THanks, Jerry

8 7

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss