- Discuss - lists.centos.org

vim update for CentOS-3.3 x86_64 rebuild :(
by Tru Huynh 11 Jan '05

11 Jan '05

Greatings, I am very sorry for having to misrebuild the vim update for x86_64 (CentOS-3.3): Wrong build host which was using a different libacl than the current CentOs-3.3... upon upgrading you might have got: ....Unable to satisfy dependencies Package vim-enhanced needs libacl.so.1(ACL_1.0)(64bit), this is not available. Package vim-minimal needs libacl.so.1(ACL_1.0)(64bit), this is not available. I have rebuild the new ones and replaced the wrong ones on the master mirror tonight Tue Jan 11 23:03:10 UTC 2005 ref: [RHSA-2005:010-01] Updated VIM packages fix security vulnerability https://rhn.redhat.com/errata/RHSA-2005-010.html ...centos-3/3.3/updates/x86_64/ RPMS/vim-common-6.3.046-0.30E.1.x86_64.rpm RPMS/vim-enhanced-6.3.046-0.30E.1.x86_64.rpm RPMS/vim-minimal-6.3.046-0.30E.1.x86_64.rpm RPMS/vim-X11-6.3.046-0.30E.1.x86_64.rpm SRPMS/vim-6.3.046-0.30E.1.src.rpm Best regards, Tru Huynh (deeply confused)

1 0

Open/Closed Ports
by Wayne Bastow 11 Jan '05

11 Jan '05

Hi, Just installed CentOS 3.3. I said to allow only http and ssh when I did the install. I can ssh to the machine and until I compiled apache 2 and installed it seperately I could connect to the default web server. I am running oracle on the box and have found that I can't connect remotely to oracle from another linux box (sql*net works fine on the CentOS box itself). I think it is because the port (oracle is on 1521) is blocked. Can anyone give me an idea of where to start? I've looked at hosts.deny/allow and they both contain no entries and I can't find anything in /etc that seems to be involved in the problem. Thanks, Wayne

4 5

Ok to update to 3.4
by cweisiger＠i-55.com 11 Jan '05

11 Jan '05

i get very little updates from yum, so i was wondering if it is ok to go ahead and update to 3.4, being im running 3.3.. i run a minimal system...minus a few packages removed after install. just didnt know about any possible security issues that would come down for 3.3 if i have updated to 3.4..how would or would i even need them....or will the upcoming security, bugs, etc.. be strictly for 3.4?...what im trying to say is would i miss any updates if i updated to 3.4, that are meant for 3.3?

2 1

Think someone has got into my server...
by WipeOut 11 Jan '05

11 Jan '05

I have just run chkrootkit on my server and have the following two suspicious entries.. Searching for suspicious files and dirs, it may take a while... /usr/lib/perl5/5.8.0/i386-linux-thread-multi/.packlist and further down.. Checking `bindshell'... INFECTED (PORTS: 465) Anyone have any advice for getting rid of it?? Later..

4 5

New public rsync/http/ftp mirror of CentOs Linux in Asia
by ftp-adm 11 Jan '05

11 Jan '05

Hi Following public mirror for CentOS Linux is available. Please add our URL's to the Download/Mirrors pages of CentOS. ftp://ftp.riken.jp/Linux/caos http://ftp.riken.jp/Linux/caos rsync://ftp.riken.jp/caos WAN Connectivity : 1 Gbps (Tire 1) rsync update : four times per day to mirror.caosity.org::cAos city/state/Country : Wako/Saitama/Japan Best Regards, Takashi Ichihara ( ftp-adm(a)alpha.riken.go.jp)

1 0

an RPM conundrum
by Barry L. Kline 11 Jan '05

11 Jan '05

I have an interesting chicken-and-egg problem that I hope someone can help me out of. I have a machine on which I originally loaded White Box. I subsequenty converted to CentOS using the instructions found numerous times in the group -- e.g. get the redhat-package RPM (thus changing /etc/redhat-release), then configuring yum and then yum -y upgrade. Everything has been going fine... that is until I tried installing the rpm-build package. Now I'm getting the message: [root@intranet root]# yum install rpm-build Gathering header information file(s) from server(s) Server: CentOS-3.3 - Addons Server: CentOS-3.3 - Base Server: CentOS-3.3 - Extras Server: CentOS-3.3 - Updates Finding updated packages Downloading needed headers Resolving dependencies ....Unable to satisfy dependencies Package rpm-build needs rpm = 4.2.3-10, this is not available. Which I assume is caused by my version of rpm: rpm-4.2.3-10.WB1 I can't seem to figure out how to convert RPM packages and, of course, I can't simly rpm -e rpm and then use the erased package to install itself. I've tried a simple yum --download-only ... but the dependency check still occurs. Any thoughts on what to try next? TIA, Barry

2 2

problem building the isos?
by security 11 Jan '05

11 Jan '05

Hello all, I am making my own distribution based on RHEL AS 3U4 (with additional rpms, like urpmi, webmin, nessus, Maildir format by default for Postfix, courier-IMAP etc.) and I would like to have information from the CentOS team. I am generating the isos of this distribution but during the launching of anaconda, the graphic interface failed to work, so the installation in text mode is the only one possible. I think i find the problem: pam. by using pam-0.75-51, all is ok (graphical install of anaconda) but with more recent versions, anaconda refuses to launch the graphical install. Question: had somebody similar problems?? Thank you in advance and good year to all :) -- jean-sébastien Hubert Service Informatique Air-Austral 0262 93 10 34 interne: 182 http://www.air-austral.com

2 3

CentOS 3.4 - i386 release
by Lance Davis 11 Jan '05

11 Jan '05

For Release: January 10, 2005 The CentOS Team is pleased to announce the official release of CentOS 3.4 for i386. This release includes all RHEL 3 updates (for U4) and errata up to January 5th, 2005. New ISO images are available as well as an installable DVD edition with source. In addition this release is available via BitTorrent. Downloading -- Bittorrent ------------------------- Bittorrents of a DVD image , binary iso's, and source iso's are available as follow: dvd iso http://mirror.centos.org/centos/3.4/isos/i386/CentOS-3.4-i386-dvd.iso.torre… 3 binary iso's http://mirror.centos.org/centos/3.4/isos/i386/CentOS-3.4-i386-discs1-3.torr… 3 source iso's http://mirror.centos.org/centos/3.4/isos/i386/CentOS-3.4-i386-src1-3.torrent Please use bittorrent and keep your downloader running for others to use even after the download completes. If you need to install bittorrent for CentOS, rpms are available from Dag's repository. http://dag.wieers.com/packages/bittorrent/bittorrent-3.4.2-1.1.el3.rf.noarc… An earlier version of bittorrent is also available in the CentOS 3.3 <contrib> repo - which may be installed using 'yum install bittorrent' - a gui version is also available - 'yum install bittorrent-gui' Then execute btdownloadcurses.py <url to .torrent file> in a shell. (or btdownloadgui.py for the gui) You may need to open ports 6881-6889 and 6969 if you have tight firewall restrictions. The .torrent files are also available on all caosity mirrors. Once again - please leave your downloader running after the download is complete (with ports 6881-6889 open) as your downloader will become part of the peer to peer bittorrent network and reduce the load on our mirror servers. Further information on bittorrent is available at http://bittorrent.com Downloading -- .iso images ------------------------- iso images are available from your favorite CentOS mirror as well. A current list of mirrors can be obtained from http://www.centos.org/mirrors Purchasing ---------- isos are available to purchse from www.cheeplinux.com (UK) and should also be available from a number of other online vendors. Upgrade Notes ------------- Initially CentOS 3.3 systems will not be automatically upgraded to CentOS 3.4. However in 72-96 hours from this announcment the centos-release rpm for 3.4 will be added to the 3.3 tree and that will force automatic upgrades when using yum. If you do NOT want to upgrade then exclude centos-release from updates in your yum.conf. We will try to maintain security updates for CentOS 3.3 for as long as there are no issues that mean they cant be used (eg 3.4 specific dependency issue) -- but as soon as that happens we will have to close the CentOS 3.3 tree. From this point forward $releasever will stay at 3. When 3.5 is released systems will automatically get updated. To prevent this you will need to hard code 3.4 in yum.conf in place of $releasever. To manually upgrade to CentOS-3.4 (now) --------------------------------------- first rpm -ivh http://mirror.centos.org/centos/3.4/os/i386/RedHat/RPMS/centos-yumcache-3.1… (to avoid the header downloads) (Note: If you had poreviously upgraded from CentOS 3.1 then you will already have a cento s-yumcache rpm installed and rpm will complain , in which case use rpm -Fvh) rpm -Fvh http://mirror.centos.org/centos/3.4/os/i386/RedHat/RPMS/centos-release-3-4.… (to get the new releasever) then yum update To automatically upgrade to CentOS 3.4 (from 72-96 hours time) ------------------------------------------------------ We recommend that you install centos-yumcache before updating as it will save all the header downloading. yum install centos-yumcache yum update centos-release yum update Otherwise yum will take two update cycles to perform the update, the first will update centos-release and the second will download all the headers and then update all the packages. CENTOSPLUS ---------- The new CentOSplus repo is designed to allow us to provide extended functionality to CentOS without compromising compatibility with Redhat Enterprise Linux. Packages that will live in CentOSplus - such as MySQL-4 - would update packages in the base distro, so it is only recommended that you enable CentOSplus in yum.conf when you are sure that is what you want. The difference between CentOSplus and 'extras' is that 'extras' are additional packages that are not already installed, so would not update existing packages beyond Rhel-3 , but provide extra functionality. It is hoped that there will be a wide range of CentOSplus packages provided in the future. RELEASE NOTES & CAVEATS ----------------------- -- YUM -- Your yum.conf should not get overwritten by the upgrade, but the new version may get written as yum.conf.rpmnew If your /etc/yum.conf file is a symlink to centos-yum.conf and you have manually edited centos-yum.conf, your centos-yum.conf file will be replaced by a new centos-yum.conf from the centos-yumconf rpm file in CentOS 3.4. Your existing centos-yum.conf file will be saved as yum.conf-SAVE. The following changes have been made tp the default centos-yum.conf :- Reference to the CentOSplus repository has been added (see below) but is not activated. The download path has changed from /centos-3/$releasever to /centos/$releasever to allow for update to CentOS-4 and later versions without having to change the configuration file. If you have edited yum.conf then neither of these changes will prevent it working but you would be advised to make them to avoid future problems. -- CENTOS-RELEASE RPM -- In order to accomodate compatibility with Dag's and other 3rd party repositories, the naming convention of centos-release has been changed. The version is now 3 (rather than 3.3) and will remain fixed $releasever used by yum) for the life of CentOS 3. The first number of the release will now carry the designation of the edition. For example, CentOS 3.4 ships with centos-release-3-4.2. The version is 3 and the release is 4.2. Compare this with the centos-release from the prior version: centos-release-3.3-1. yum detected $releasever as 3.3. Dag's excellent repository of Enterprise Linux RPMS. can be found at http://dag.wieers.com/home-made/apt/ -- RPM -- Due to an upstream bug that causes RPM to fail and requires manual elimination of the RPM database, CentOS 3.4 ships with the RPM used in CentOS 3.3. When the upstream providor releases a patched RPM the CentOS team will follow suit. CentOS 3.4 ships with rpm-4.2.3-10 as did CentOS 3.3 rather than rpm-4.3.3-13 provided with rhel3 U4. (https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=143532) -- MAILMAN -- CentOS 3.4 now ships with mailman as released by RedHat with quarterly Update 4 (U4). However the CentOS 3.4 verion is NOT compatible with the version available via CentOS 3.3 Extras. Since you can't read the Mailman upgrade documentation, we have made the upgrade notes available on the CentOS website. Read them here http://www.centos.org/mailman Databases will need to be manually updated per the instructions above. If want to avoid upgrading Mailman at this time, then temporarily exclude mailman from updates in your yum.conf until you are happy with the upgrade. No further updates to the 3.3 version of mailman will be released by the CentOS team. ------------ To stay up to date with CentOS join the CentOS mailing list at http://lists.caosity.org/mailman/listinfo/centos Join #centos at irc.freenode.net Or participate in the web forums at www.centos.org Please add any errors or bugs you encounter to buzilla on http://www.centos.org/bugs. Enjoy, The CentOS Team Lance Davis CentOS 3 i386 Release Manager

3 3

3.3 -> 3.4 transition
by Joe Pruett 11 Jan '05

11 Jan '05

maybe some of the 3.4 beta discussion has covered this, i wasn't watching it too closely. what is going to be the process to convert a system from 3.3 to 3.4? will a simple yum update work? or do we have to do something more intentional to make it happen? how does redhat handle u3->u4 updates? i assume that since u4 has been published that security patches from rh will only apply to u4? or do they also supply security patches for u3 for some period of time?

6 6

Release Announcement: CentOS 3.4 ia64 rc1
by donavan nelson 11 Jan '05

11 Jan '05

The CentOS team has released the first RC (release candidate) for CentOS 3.4 ia64. This product supports Intel Itanium2 processors. This release is available via Bittorrent at this time. http://beta.centos.org/centos-3/3.4beta/isos/ia64/CentOS-3.4-rc1-ia64-binar… This is a RC and not suitable for use in production tasks. Please add any errors or bugs you encounter to bugzilla on http://www.centos.org/bugs. --------------------- To stay up to date with CentOS join the CentOS mailing list at http://lists.caosity.org/mailman/listinfo/centos Join #centos at irc.freenode.net Or participate in the web forums at www.centos.org Enjoy, The CentOS Team

1 0

OT -- Inexpensive CentOS dedicated servers?
by Ryan Lane 11 Jan '05

11 Jan '05

Hey all, I am looking to get some input regarding inexpensive dedicated servers -- preferably with a hosting company the offers CentOS as an OS option. Does anybody have any input or recommendations? I'd really like to support a company that uses CentOS. And there are _so many options out there, is kind of overwhelming. Thanks, Ryan

12 13

re:[Centos] The new CentOS3.4 version
by cweisiger＠i-55.com 10 Jan '05

10 Jan '05

OK, disregard the previous email from me..although some might be replying by now....i found the email regarding the official release of 3.4.....for some reason or another i could view the email properly....so i read up on it and all my questions were answered....sorry about the previous email....

1 0

HP switch and e1000 install
by Bill Wichser 10 Jan '05

10 Jan '05

There appears to be an issue with installation over an HP switch. Upon bootup, the network driver resets twice which somehow never allows the client to ask and therefore receive it's MAC address. This follows the RH bug : https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=110036 Installation via a directly attached cable to the head node works fine. I have emailed the Beowulf list in hopes that the problem was in some configuration of the switch but have recently come across this bug report and it appears that the symptoms are the same. Are there any plans to roll these patches into CentOS 3.3 (x86_64) in the near future? Thanks, Bill

2 2

Is 3.4 the same as 3.3 with all updates?
by WipeOut 10 Jan '05

10 Jan '05

I guess the subject says it all.. :) I am still new to Centos so I am not sure on the upgrade path and what is the best way to stay up to date.. Will updates for 3.3 still be added to the yum repo or do I need to upgrade/update my system to 3.4? Thanks

2 1

2.6 kernel on CentOS-3.3
by Tru Huynh 10 Jan '05

10 Jan '05

Hi I am happy to share a "proof of concept" for a centos-3.3 (not yet 3.4 ready) x86 and x86_64 distributions running either 2.4 and 2.6 linux kernels. This is not an official statement of the CentOS team! <include std disclaimer> don't complain if this howto eats your machine ;) It works for me and the src.rpm are provided. </include> <blurb> In order to have a 2.6 kernel on CentOS-3, one need to upgrade a few packages: at least module-init-tools, sysstat, initscripts... But in order to keep a 2.4 kernel happy, you must keep modutils around. I have repacked both modutils AND module-init-tools in the same package and it is providing both. mkinitrd needs to copy both insmod(module-init-tools) and insmod.old (modutils) into your initrd, since you can use either 2.4 or 2.6 kernel. the initscripts_26 is trying to get the initialisation for both series (there is much room for improvememt). A prebuild linux 2.6.10-ac8 kernel is there too, but you don't need it, since you can compile your own. I did not make a mandatory requirement for such a package. /etc/modprobe.conf is autogenerated, but some modules could have changed name, so have a look at it! all the files are here: ftp://ftp.pasteur.fr/pub/BIS/tru/2.6_CentOS-3/yum </blurb> <howto> 1) wget ftp://ftp.pasteur.fr/pub/BIS/tru/2.6_CentOS-3/yum.conf.mini use sudo or become root 2) yum -c yum.conf.mini -y update 3) yum -c yum.conf.mini -y install initscripts_26 either install you own linux-2.6.x kernel or 4a) yum -c yum.conf.mini -y install linux linux-doc 4b) yum -c yum.conf.mini -y install linux-smp 4c) yum -c yum.conf.mini -y install linux-source reboot </howto> references: - gmk has provided a one way 2.4 ->2.6 http://altruistic.lbl.gov/lbnl - http://linuxdevices.com/articles/AT5793467888.html - linux src.rpm is a steal for the cAos-2 + update to 2.6.10-ac8 Best regards, Tru -- Dr Tru Huynh | http://www.pasteur.fr/recherche/unites/Binfs/ mailto:tru@pasteur.fr | tel/fax +33 1 45 68 87 37/19 Institut Pasteur, 25-28 rue du Docteur Roux, 75724 Paris CEDEX 15 France

1 0

vim update for CentOS-3.3 x86_64
by Tru Huynh( CentOS key) 10 Jan '05

10 Jan '05

Greatings, vim update for x86_64 are now available. ref: [RHSA-2005:010-01] Updated VIM packages fix security vulnerability https://rhn.redhat.com/errata/RHSA-2005-010.html ...centos-3/3.3/updates/x86_64/ bbc554b195a3dff7feed456acd9199e8 RPMS/vim-common-6.3.046-0.30E.1.x86_64.rpm a59303d90e1c0e9c8e40d8dfb4665322 RPMS/vim-enhanced-6.3.046-0.30E.1.x86_64.rpm 112be74a11c662fe4f0ef8a7e9c60a07 RPMS/vim-minimal-6.3.046-0.30E.1.x86_64.rpm 044ebe66d069a1c876132e149db81d8f RPMS/vim-X11-6.3.046-0.30E.1.x86_64.rpm a750f99a52a5e940feba5c81dc356f46 SRPMS/vim-6.3.046-0.30E.1.src.rpm Best regards, Tru Huynh

1 0

RE: [Centos] OT -- Inexpensive CentOS dedicated servers?
by Mark A. Lewis 10 Jan '05

10 Jan '05

http://www.layeredtech.com I have a box with them and have been very happy sofar. They offer CentOS. -----Original Message----- From: centos-bounces(a)caosity.org [mailto:centos-bounces@caosity.org] On Behalf Of Ryan Lane Sent: Monday, January 10, 2005 10:19 AM To: centos(a)caosity.org Subject: [Centos] OT -- Inexpensive CentOS dedicated servers? Hey all, I am looking to get some input regarding inexpensive dedicated servers -- preferably with a hosting company the offers CentOS as an OS option. Does anybody have any input or recommendations? I'd really like to support a company that uses CentOS. And there are _so many options out there, is kind of overwhelming. Thanks, Ryan _______________________________________________ CentOS mailing list CentOS(a)caosity.org http://lists.caosity.org/mailman/listinfo/centos

1 0

CentOS 3.4 - i386 - errata - initscripts
by Lance Davis 10 Jan '05

10 Jan '05

There is an update to initscripts for CentOS 3.4. The version packaged in the 3.4 isos missed the patch to remove the 10 second delay on boot with an 'unsupported configuration' . This update reimplements the patch. Files :- updates/i386/RPMS/initscripts-7.31.18.EL-1.centos.1.i386.rpm updates/i386/SRPMS/initscripts-7.31.18.EL-1.centos.1.src.rpm To update 'yum update initscripts' Lance

1 0

RE: [Centos] NNTP versus web forums
by Mark A. Lewis 10 Jan '05

10 Jan '05

No, I mean the vast majority of employers block 119 and do not offer news service. I realize you do not need a local server, but you have to be able to connect to pull it from somewhere... -----Original Message----- From: centos-bounces(a)caosity.org [mailto:centos-bounces@caosity.org] On Behalf Of Jim Zajkowski Sent: Saturday, January 08, 2005 4:06 PM To: CentOS discussion and information list Subject: Re: [Centos] NNTP versus web forums On Jan 8, 2005, at 4:46 PM, Mark A. Lewis wrote: > The other big thing to remember is that many of us do not have NNTP > feeds at work, where e-mail and the web are easy to get to. You don't need a local nntp server to read news, any nntp client can connect to any other nntp server, assuming that that server lets you connect. I'm not in favor of creating a CentOS topic under the usenet comp.sys hierarchy, I'm talking about running a private nntp server. For example, Novell runs their forums over nntp, and people configure their clients to connect to news.novell.com. When I was a student we used a local nntp server for class forums and project help. --Jim -- Jim Zajkowski OpenPGP 0x21135C3 http://www.jimz.net/pgp.asc System Administrator 8A9E 1DDF 944D 83C3 AEAB 8F74 8697 A823 2113 5C53 UM Life Sciences Institute _______________________________________________ CentOS mailing list CentOS(a)caosity.org http://lists.caosity.org/mailman/listinfo/centos

6 8

CentOS and SuperMicro P8SCi motherboard
by Avtar Gill 10 Jan '05

10 Jan '05

There was recently a thread on this mailing list regarding SuperMicro hardware and CentOS. Here is one of the posts: http://lists.caosity.org/pipermail/centos/2005-January/001503.html My question is about the P8SCi motherboard, a fairly new SuperMicro model. The vendor's specifications page mentions Linux but I would rather hear from end users and their experiences. Here is a URL: http://supermicro.com/products/motherboard/P4/E7221/P8SCi.cfm I've found one post on a Debian mailing list which mentioned it but that person is using a 2.6 kernel: http://tinyurl.com/5jlry Is anyone here using CentOS (or any RHEL clone OS) on a box that contains one of these boards? Any issues that you have come across? Thanks, Avtar

1 0

Where is ethereal?
by Joe Polk 09 Jan '05

09 Jan '05

YUM says I already have ethereal installed, but I have no /usr/sbin/ethereal. I have 3 directories about but no executable. -- <<JAV>>

7 24

RE: [Centos] NNTP versus web forums
by Mark A. Lewis 09 Jan '05

09 Jan '05

Even if there isn't, it wouldn't be hard to 'inject' the mail list posts into the database for the forums, just use the subject as the topic, give it it's own subforum. Going the other way could be a bit harder. -----Original Message----- From: centos-bounces(a)caosity.org [mailto:centos-bounces@caosity.org] On Behalf Of Avtar Gill Sent: Saturday, January 08, 2005 8:23 PM To: CentOS discussion and information list Subject: Re: [Centos] NNTP versus web forums On Sat, 8 Jan 2005 15:53:37 -0500, Jim Zajkowski <jim(a)jimz.net> wrote: > I see that a number of questions are being answered on the new web > forum that is now part of the centos site. And the mailing lists So > now there are two places to search, both the forum and the mailing > list archives. > > This is just doubles the work required to follow along or find a > solution. That's funny because the thought about having "two places to search" occurred to me a couple of days ago when I read the following two posts: http://lists.caosity.org/pipermail/centos/2005-January/001496.html http://lists.caosity.org/pipermail/centos-devel/2005-January/000574.html I am new to Centos so correct me if I'm wrong but I'm assuming that developers and end users were initially corresponding with each other via mailing lists. In my opinion, redirecting some future discussions to the web forums while leaving others on the mailing lists seems counter productive. I'm not familiar with the CMS software that is being used at centos.org but is there any mailing list <-> web forum software available for it? _______________________________________________ CentOS mailing list CentOS(a)caosity.org http://lists.caosity.org/mailman/listinfo/centos

2 1

NNTP versus web forums
by Jim Zajkowski 09 Jan '05

09 Jan '05

I see that a number of questions are being answered on the new web forum that is now part of the centos site. And the mailing lists So now there are two places to search, both the forum and the mailing list archives. This is just doubles the work required to follow along or find a solution. I know NNTP isn't sexy, it doesn't allow graphics in posts, it doesn't have person ratings or cute smileys, and it requires a modicum of competence to use, but it DOES do all of these: . Allows off-line reading and replying, with an appropriate reader. . Searching. . Reliable way of showing you which threads have new posts. -> I have not yet found a single web forum that did this well. . Orders of magnitude faster. . Easy to archive. . Small footprint, on-disk and over-network. . Synchronisation to multiple servers, reduced network use. . Bidirectional synchronisation to a mailing list. . Supports authenticated posting, moderation, etc. --Jim -- Jim Zajkowski OpenPGP 0x21135C3 http://www.jimz.net/pgp.asc System Administrator 8A9E 1DDF 944D 83C3 AEAB 8F74 8697 A823 2113 5C53 UM Life Sciences Institute

5 5

New 3ware 9500 Boot Disk Images for CentOS
by Seth Bardash 09 Jan '05

09 Jan '05

We have just posted new 3ware 9500 install boot driver disks based on the new 3ware 9.1.5.2 drivers. This install disk will ONLY work with Athlon and Opteron based systems running 32 bit CentOS 3.3 These images also contain built-in firmware upgrades for the 3ware 9500 SATA Raid controllers and provide increased RAID 5 performance. Also added to the download page is a version of 3DM2 disk management software for the 9500 series with a modified install script to allow automatic startup at boot time. This 3DM2 download is specific to CentOS but is architecture independent and should work with all installs. Thanks for the bandwidth. Seth Bardash Integrated Solutions and Systems 1510 North Gate Road Colorado Springs, CO 80921 719-495-5866 719-495-5870 Fax 719-337-4779 Cell http://www.integratedsolutions.org Failure can not cope with perseverance! -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.6.9 - Release Date: 1/6/2005

1 0

RE: [Centos] NNTP versus web forums
by Mark A. Lewis 08 Jan '05

08 Jan '05

The other big thing to remember is that many of us do not have NNTP feeds at work, where e-mail and the web are easy to get to. -----Original Message----- From: centos-bounces(a)caosity.org [mailto:centos-bounces@caosity.org] On Behalf Of Johnny Hughes Sent: Saturday, January 08, 2005 3:05 PM To: CentOS Users Subject: Re: [Centos] NNTP versus web forums On Sat, 2005-01-08 at 15:53 -0500, Jim Zajkowski wrote: > I see that a number of questions are being answered on the new web > forum that is now part of the centos site. And the mailing lists So > now there are two places to search, both the forum and the mailing > list archives. > True ... but some users like forums, and others like mailing lists. Each has there advantages and disadvantages. > This is just doubles the work required to follow along or find a > solution. > > I know NNTP isn't sexy, it doesn't allow graphics in posts, it doesn't > have person ratings or cute smileys, and it requires a modicum of > competence to use, but it DOES do all of these: > > . Allows off-line reading and replying, with an appropriate reader. > . Searching. > . Reliable way of showing you which threads have new posts. > -> I have not yet found a single web forum that did this well. check the envelope at the left after you login ... if the color is bright it's new to you ... if it is lightened out, it is not new to you. > . Orders of magnitude faster. > . Easy to archive. > . Small footprint, on-disk and over-network. > . Synchronisation to multiple servers, reduced network use. > . Bidirectional synchronisation to a mailing list. > . Supports authenticated posting, moderation, etc. > > --Jim I like forums ... and I personally think that forums are easier to search. I also think that things like BOLD letters and links like: [url=xxxxx]Text[/url] Where xxxxx is a 200 character string, are much more convenient in a forum. BUT ... I realize that there is no right answer, much like the vi / emacs argument, the GNOME / KDE argument, and the evolution / mutt argument. However, I think offering both is what a community based distro, with users in mind should do. I could be wrong though ... my wife reminds me of that quite often :) -- Johnny Hughes <http://www.HughesJR.com/> _______________________________________________ CentOS mailing list CentOS(a)caosity.org http://lists.caosity.org/mailman/listinfo/centos

2 1

Need a proper configuration of smartd monitoring.
by Alexander Georgiev 08 Jan '05

08 Jan '05

Hi, I have a software mirror with 2 IDE disks - hda and hdc. I would like to be able to monitor their health using smartd, and I am running /etc/init.d/smartd as a service. I placed the folloing in the /etc/smartd.conf /dev/hda -H -m root /dev/hdc -H -m root I case of a problem I want to be notified by mail, and a message to be logged to the system log. Just want to know if this confugiration is adequate for proper monitoring with smartd, or I should add some other options in the conf file? Kind regards. A. Georgiev.

1 0

samba-3.0.9-1.3E.2
by Tom Seeley 06 Jan '05

06 Jan '05

I wouldn't normally hurry you guys about a package release, (because you're doing an excellent job), but any eta on the above? samba-3.0.9-1.3E.1 is in the current repos and that install seriously fubar'd my ADS + winbind setup. samba-3.0.9-1.3E.2 (which requires krb5-libs-1.2.7-31) fixes the problem. NB, samba-3.0.7-1.3E.1 (the old version) was fine for me, its only this intermediate version that's hosed. Thanks for you on going efforts, -- Tom Seeley

4 4

CentOS-2 errata
by John Newbigin 06 Jan '05

06 Jan '05

The following errata for CentOS-2 have been built and uploaded the the centos mirror: RHSA-2005:020-01 Updated samba packages fix security issue Files available: samba-2.2.12-1.21as.4.i386.rpm samba-client-2.2.12-1.21as.4.i386.rpm samba-common-2.2.12-1.21as.4.i386.rpm samba-swat-2.2.12-1.21as.4.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin - Computer Systems Officer School of Information Technology Swinburne University of Technology Melbourne, Australia http://www.it.swin.edu.au/staff/jnewbigin

1 0

CentOS-2 errata
by John Newbigin 06 Jan '05

06 Jan '05

The following errata for CentOS-2 have been built and uploaded the the centos mirror: RHSA-2005:010-01 Updated VIM packages fix security vulnerability Files available: vim-X11-6.0-7.19.i386.rpm vim-common-6.0-7.19.i386.rpm vim-enhanced-6.0-7.19.i386.rpm vim-minimal-6.0-7.19.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin - Computer Systems Officer School of Information Technology Swinburne University of Technology Melbourne, Australia http://www.it.swin.edu.au/staff/jnewbigin

1 0

CentOS-2 errata
by John Newbigin 06 Jan '05

06 Jan '05

The following errata for CentOS-2 have been built and uploaded the the centos mirror: RHSA-2005:005-01 Updated fam packages fix security issue Files available: fam-2.6.4-12.i386.rpm fam-devel-2.6.4-12.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin - Computer Systems Officer School of Information Technology Swinburne University of Technology Melbourne, Australia http://www.it.swin.edu.au/staff/jnewbigin

1 0

cAos/CentOS Users in Boston/New England area
by Matt Shields 06 Jan '05

06 Jan '05

I'm still looking for any volunteers in the Boston or New England areas that would be willing to help out at LinuxWorld in February. It goes Feb 14th - 17th, but the expo part is only 15th - 17th. If you can't come all three days, that's fine, but I would appreciate if there were a couple people that could come at least a day or two. Also, If you help out you get a 3 day pass to the expo exhibits. Here is more info on the event http://www.linuxworldexpo.com/live/12/events/12BOS05A Contact me if you'd like to help out. thanks -- Matt Shields http://masnetworks.biz http://www.centos.org http://www.caosity.org

4 3

CentOS-3 i386 errata: Updated VIM packages fix security vulnerability
by Lance Davis 05 Jan '05

05 Jan '05

https://rhn.redhat.com/errata/RHSA-2005-010.html refers changed fupdates/i386/SRPMS/vim-6.3.046-0.30E.1.src.rpmes are :- updates/i386/RPMS/vim-common-6.3.046-0.30E.1.i386.rpm updates/i386/RPMS/vim-enhanced-6.3.046-0.30E.1.i386.rpm updates/i386/RPMS/vim-minimal-6.3.046-0.30E.1.i386.rpm updates/i386/RPMS/vim-X11-6.3.046-0.30E.1.i386.rpm updates/i386/SRPMS/vim-6.3.046-0.30E.1.src.rpm To update run 'yum update' These files are on mirror.caosity.org now and should be on all mirrors within a few hours. Lance

1 0

kernel compile and console mouse
by Jesús García González 04 Jan '05

04 Jan '05

Hello everyone, I had to recompile my kernel to enable NTFS support. I used as base the i686 kernel config and enabled the read-only NTFS module. After booting my custom kernel it all works fin (it reads the NTFS partition :-) ) but the console mouse (its a text only pc) wont work. Restarting the gpm service makes the poiter show but wont respond to mouse moves or clicks and will vanish at the first keystroke. Rebooting with the original kernel brings it back to life. What did I miss? Any help aprecuated, Best wishes, J.

1 0

CentOS web page "Contact Us" form
by Rick Graves 03 Jan '05

03 Jan '05

Hey, Some time ago (two weeks maybe), I put a message in the CentOS web page "Contact Us" form, in part to see what would happen. Today I got an answer from Donavan. It is good that I finally got an answer. (I am not blaming Donavan; answering off the wall posts to a "Contact Us" form is not my idea of a good time, either.) Would it be better for submissions on the "Contact Us" form to get onto this mailing list immediately? Rick

2 1

Squirrelmail terminating web server connection..
by WipeOut 03 Jan '05

03 Jan '05

Hi, I searched around but didn't see anyone else having this problem.. I have a newly installed server running CentOS 3.3 and using the provided RPM for Squirrelmail (ver 1.4.3a-7.EL3.centos.1).. When I try to send an email I get the following error.. "The connection to www.mydomain.com:80 has terminated unexpectedly. Some data may have been transferred" I am using a Firefox browser so the error may be worded differently in IE.. Anyone have a fix for this or any idea whats causing it?

3 3

CentOS 4 Beta x86_64
by Patrick Lawrence (centos) 03 Jan '05

03 Jan '05

Hello, Is anybody working on a build of the CentOS 4 Beta for x86_64? If not, are there any directions on how to build a full distribution from the available SRPMS that were used to build the i386 version? I didn't see any docs on the website. Regards, Pat

3 4

test 2
by Denis E. Pilon 02 Jan '05

02 Jan '05

Test

2 1

3rd CD ISO CentOS4-beta
by Todd Rittinger 31 Dec '04

31 Dec '04

Anyone else experience any difficulty with the install routine recognizing disk 3? I'm trying to install 4-beta under vmware and have had the same problem with either mounting the ISO or burning to disk. I can mount and read no problem from my parent linux installation but the install routine under vmware is complaining that it's the wrong disk. (no other install problems under vmware until disk 3 is asked for). If no one else is experiencing any issues, then I can blame vmware and go from there. I've downloaded 2 copies of ISO disk3, exact same file size and same issue. TIA, TR Contents of .discinfo: 1104319683.159825 CentOS 4.0 Beta i386 3 RedHat/base RedHat/RPMS RedHat/pixmaps -- Todd G Rittinger TLC Solutions www.tlcsolutions.ca

2 3

How to unsubscribe ?
by Luis-Miguel Astudillo 31 Dec '04

31 Dec '04

How to unsubscribe from this list ? The url doesn't work ...http://www.caosity.org/mailman/listinfo/centos -- Luis-M.

2 1

centos3.4beta and Getting the Marvell/Syskonnect Gigabit Nic to work
by xspace 31 Dec '04

31 Dec '04

My dd (sk98lin v7.09) supports 3c940 (Marvel/Syskonnect) which the stock v6.x drivers doesn't . Successfull tested on a Asus A-7N8X Deluxe with Marvell Gigabit Lan the dd is available at http://slackpkg.ath.cx/centos/disk/sk98lin/

1 0

2.4.21-27.0.1.ELsmp & megaraid2 problem
by Toni 31 Dec '04

31 Dec '04

I've found a problem with CentOS 3 latest kernel (2.4.21-27.0.1.ELsmp) and megaraid2 driver. Hardware: Dell PE1600SC with CERC ATA100 RAID controller The problem is somewhat similar, but not identical as: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=123289 After updating new glibc and kernel packages the new kernel don't boot. Boot fails to mount root fs with "Cannot open root device" message. I doublechecked that /etc/modules.conf is refering to megaraid2 as it should and then recreated initrd manually, no help. Older kernel version (2.4.21-20.0.1.ELsmp) boots just fine. As RHEL3 U4 release notes states: http://www.redhat.com/docs/manuals/enterprise/RHEL-3-Manual/release-notes/a… The megaraid2 driver has been updated from v2.10.6 to 2.10.8.2-RH1 The new driver is scsi/megaraid2.o The older driver has been preserved as addon/megaraid_2106/megaraid_2106.o So I decided to try megaraid_2106, changed modules.conf, recreated initrd and... server booted with the new kernel! Could there be a problem with the latest megaraid2 driver (2.10.8.2-RH1)? Since I'm using CentOS and not RHEL, how/where I could report this problem? Best regards, ++Toni

2 1

CUPS/NFS
by Joshua Strzalko 31 Dec '04

31 Dec '04

Is there anyway to remove CUPS and NFS on the system, I'd like to stop these services, close the ports, and uninstall the software as I don't use NFS for anything on my system, and for sure don't use printing on the server. Regards, Joshua Strzalko President, Eleet Technologies, Inc. Office: 407.977.2857 Mobile: 407.923.6926 Fax: 321.244.9435 josh(a)eleet-tech.com http://www.eleet-tech.com

4 3

CentOS floppy / FTP install
by Daniel Avila 31 Dec '04

31 Dec '04

Hi, it is possible to install CentOS via a boot floppy and continue and FTP installation ? I have done that with other linux ditros and BSD but I can't find a CentOS 3 floppy setup image.

2 1

Problems migrating from WBEL
by Jason Dixon 30 Dec '04

30 Dec '04

Hi folks: I've recently migrated one of my production servers (bad Jason!) from WBEL to CentOS 3.3 using Donavan's instructions in the FAQ (http://www.centos.org/modules/smartfaq/faq.php?faqid=19) While it was as painless as the document suggests, I've run into problems with postgrey (a postfix greylisting daemon) on my server. Whenever I try to start postgrey, I get the following error (trimmed from maillog): ERROR: can't create DB environment: No such file or directory A little research led me to find the error was caused by a call to BerkeleyDB::Env->new() in postgrey. I can recreate it in a simple Perl one-liner: perl -e 'use BerkeleyDB; my $db = BerkeleyDB::Env->new() or die "blah";' This leads me to believe that something is wrong with db4, so I upgraded (--force) to the CentOS db4 package. Unfortunately, this had no effect. Speaking with Dag in IRC a couple nights back, he believes my only recourse may be to "pin" my apt sources and attempt to upgrade all of my WBEL-based packages to their CentOS counterparts. I would really like to avoid this; if necessary, I think I'd prefer to try and upgrade from the 3.3 ISO. Anyone have any thoughts or suggestions on this? Thanks, -- Jason Dixon DixonGroup Consulting http://www.dixongroup.net

4 13

Re: [Centos] Problems migrating from WBEL
by Jason Dixon 30 Dec '04

30 Dec '04

On Dec 30, 2004, at 10:57 AM, William Warren wrote: > this is very interesting to watch. It has been growing rapidly with > several fizes that are working. > > Jason Dixon wrote: >> Update on this issue. I think it might have something to do with the >> following bug in Red Hat bugzilla: >> https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=91933 >> It appears to have something to do with some combination of NTPL and >> errata versions of the kernel, db4 and glibc packages. I've rebooted >> into the older kernel (2.4.21-20), but that didn't help. I'm using >> the original db4 (4-4.1.25) from WBEL, and I'm rebuilding >> glibc-2.3.2-95.20 from source rpm. I'm dreading the thought of >> forcing an older glibc into place, but I'm hopeful that might fix it. >> Updates to follow (assuming my server survives the process)... I hate to disappoint anyone following this thread, but I think I'm going to drop the issue for now and re-migrate back to CentOS. I've found a working replacement for Postgrey in using sqlgrey (http://sqlgrey.sourceforge.net/) that appears to be working quite well (doesn't use db4). I'll continue to follow the issue with earnest, hopefully someone else will be able to offer some final insight. Perhaps I'll take the cause back up on a test system. -- Jason Dixon DixonGroup Consulting http://www.dixongroup.net

1 0

process crashing issue
by William Warren 29 Dec '04

29 Dec '04

I have an hlds server on a CentOS 3.3 box with all the latest updates. it is a p-4 1.4 ghz with 384 megs of pc-800 and no less than 250 megs free at all times. Hlds has been crashing on me since the latest updates. I am thinking it is hlds acting a fool but i wanted to post here as well just to make sure. Here is the error. ./hlds_run: line 423: 5450 Segmentation fault $HL_CMD Using host libthread_db library "/lib/tls/libthread_db.so.1". Core was generated by `./hlds_i686 -game cstrike +ip 192.168.0.201 +port 27015 +maxplayers 11 -autoupd'. Program terminated with signal 11, Segmentation fault. #0 0xb74a0161 in ?? () #0 0xb74a0161 in ?? () End of crash report Program terminated with signal 11, Segmentation fault. #0 0xb74a0161 in ?? () #0 0xb74a0161 in ?? End of crash report Is this anything related to CentOS at all or is this purely an application error? William -- My "Foundation" verse: Isa 54:17 No weapon that is formed against thee shall prosper; and every tongue that shall rise against thee in judgment thou shalt condemn. This is the heritage of the servants of the LORD, and their righteousness is of me, saith the LORD. -- carpe ductum -- "Grab the tape" CDTT (Certified Duct Tape Technician)

2 2

mirrors for CentOS-4.0 Beta?
by Ryan Lane 29 Dec '04

29 Dec '04

Quick question. Does anybody know of any mirrors for CentOS-4.0 Beta? I would like to give it a spin, but before I download the iso's from c4beta.caosity.org, I thought I'd check. Thanks, Ryan

5 8

Best RH/FC version for dvd rip?
by Michael 29 Dec '04

29 Dec '04

Greetings: I'd like to bring up a CentOS-3.3 system to use for multi-media purposes. One of the packages I'm installing is dvdrip and all it's dependant packages (libdv, libdvdcss, libdvdread, avifile, & transcode). I'm hunting down the packages on freshrpms.net and I notice that there are packages available for FC1, FC2 & FC3. Question: Which FC version should I use for CentOS-3.3? Thanks, Michael

4 6

kernel panic on upgrade
by Brett Moss 29 Dec '04

29 Dec '04

Hello, I'm having some troubles with upgrades. I've followed the instructions from Owl River on moving from Redhat 8 to Redhat 9 and then to Centos. http://www.owlriver.com/projects/yum/rhl8-to-rhl9/ http://www.owlriver.com/tips/centos-31-ex-rhl-9/ The 8 to 9 works well on all machines, and the 9 to Centos went well for a laptop. The 9 to Centos fails with a kernel panic on two machines. This is right after the first part of the upgrade, upgrading rpm, kernel and kernel-smp. EXT3-fs: unable to read superblock mount: error 22 mounting ext3 I believe these are the lines from the machine(s). Both troubled servers are dual pentium II 450's with adaptec 19160 scsi cards, running a software raid 1 and booting from sda1 _not_ the mirror with grub. I have been able to boot back into the Redhat 9 kernel with no troubles. These are production boxes, so I'm a bit hesitant to do anything drastic, hence the email to the list. I'd sure appreciate any direction you all might be able to give. Thank you, Brett __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

update killed my x
by beau 28 Dec '04

28 Dec '04

X server, that is (as opposed to my ex-spouse...) Anyway, I was loving life with my rebuilt 2.4.21-9.0.1.EL.c0custom041130a kernel, and then ran "yum update", which gave me a grub line for 2.4.21-20.0.1EL, but the 21-20 not only won't work with the old X settings, I can't get it to set up X at all. I tried running "yum update" from a console on this kernel, but yum can't find the conf file unless I tell it where it is with the -c switch, and even then it won't follow the symlink from /etc/yum.conf to /etc/centos-yum.conf. Once I supply the proper switch and path then it starts the update and chokes on the GPG keys for php-mysql. As directed in the error message I've tried running yum clean and also tried removing the /var/.../php-mysql... file indicated, to no avail. That said, all helpers appreciated. -- Robert Thomas ("beau") Hayes Link Open your heart, pray for peace, preach healing (c)2004ISR http://www.semanticrestructuring.com/

2 4

3.4 beta testing
by lance＠uklinux.net 28 Dec '04

28 Dec '04

I have found 2 packages so far missing from 3.4beta they are irb and qt-PostgreSQL both from the addons repo I am building/linking them and will sync. Lance -- uklinux.net - The ISP of choice for the discerning Linux user.

1 0

RE: [Centos] Best RH/FC version for dvd rip?
by Mark Spieth 28 Dec '04

28 Dec '04

Apparently it is, I stand corrected. Mark Spieth - Director of Internet Services Northeast Ohio Digital Inc. http://www.neod.net mspieth(a)neod.net 330-830-6551 CONFIDENTIALITY NOTICE: The materials attached hereto are confidential and the property of the sender. The information contained in the attached materials is privileged and/or confidential and is intended only for the use of the above-named individual(s) or entity(ies). If you are not the intended recipient, be advised that any unauthorized disclosure, copying, distribution or the taking of any action in reliance on the contents of the attached information is strictly prohibited. If you have received this transmission in error, please discard the information immediately -----Original Message----- From: Chris Hammond [mailto:chris@tac.esi.net] Sent: Tuesday, December 28, 2004 12:43 PM To: Michael Jennings Cc: centos(a)caosity.org Subject: Re: [Centos] Best RH/FC version for dvd rip? Michael Jennings wrote: >On Tuesday, 28 December 2004, at 07:45:03 (-0800), >Michael wrote: > > > >>I'd like to bring up a CentOS-3.3 system to use for multi-media >>purposes. >> >>One of the packages I'm installing is dvdrip and all it's dependant >>packages (libdv, libdvdcss, libdvdread, avifile, & transcode). >> >> > >I'm not sure I'd want to broadcast the fact that I'm doing something >illegal on a public mailing list.... > >Michael > > > Is it illegal to rip a DVD to a file on your hard drive for personal use? chris _______________________________________________ CentOS mailing list CentOS(a)caosity.org http://lists.caosity.org/mailman/listinfo/centos

1 0

CentOs Dvd?
by Robert Kubichek 28 Dec '04

28 Dec '04

Is there a dvd iso for the latest release of CentOs ??? Thanks much! Robert Kubichek

1 0

RAID Card for CentOS 3 compatibility
by CN Buy 28 Dec '04

28 Dec '04

Hi everybody, I need to setup a couple of new servers with RAID 1 & another with RAID 5, witch card will have built in support (no need for drivers). It can be for ATA or SATA drives (any preference on ATA or SATA ?). I'm looking for a PCI card , or a motherboard with built in card. I been looking at the : 1. "3ware 64-bit PCI to SATA RAID Controller Card, Model "Escalade 8006-2LP", can I plug this card in on a 32 bits PCI slot or it need to be a 64 bit one. 2. 3Ware 7006-2 2 Port ATA RAID 3. Also I came across this one (less pricy than the 3ware ) LSI PCI to ATA RAID Controller Card, Model "MegaRAID ATA 133-2" Finally I got a Tyan server that has a built in Raid card, (RAID bus controller: Promise Technology, Inc. PDC20276) and the drivers are for the RH 7,8. So when I run the drivers it tells me that is not compatible. Any recommendation on how to make it work ? I found this on the net : (will this work for the centos 3) TIA Carlos If you have a Promise PDC 20276 IDE Controller (e.g. on board the Asus A7V333 mainboard) and are wondering, why it doesn't work anymore with kernel version 2.4.21 (though it had worked with 2.4.20): Try recompiling your kernel not only with "PROMISE PDC202{68|69|70|71|75|76|77} support" but also with "Special FastTrak Feature" (CONFIG_PDC202XX_FORCE=y) enabled. /usr/src/linux-2.4.21/.config: [...] CONFIG_BLK_DEV_PDC202XX_NEW=y CONFIG_PDC202XX_FORCE=y CONFIG_BLK_DEV_PDC202XX=y [...] Oh, and, BTW: There finally are official Linux drivers from Promise (at least for some RedHat etc. versions). They can be found in section "FastTrack TX2000". -----Original Message----- From: centos-admin(a)caosity.org [mailto:centos-admin@caosity.org] On Behalf Of centos-request(a)caosity.org Sent: Tuesday, December 28, 2004 7:00 AM To: centos(a)caosity.org Subject: CentOS digest, Vol 1 #251 - 14 msgs Send CentOS mailing list submissions to centos(a)caosity.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.caosity.org/mailman/listinfo/centos or, via email, send a message with subject or body 'help' to centos-request(a)caosity.org You can reach the person managing the list at centos-admin(a)caosity.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS digest..." Today's Topics: 1. CentOS-3 x86_64 errata - Updated xscreensaver package (Will Dinkel) 2. GRUB bootloader (Beth Curotto) 3. CentOS-3 x86_64 errata - Updated redhat-config-date package (Will Dinkel) 4. Re: GRUB bootloader (Jacob Robert Wilkins) 5. CentOS-3 x86_64 errata - Updated redhat-config-services package (Will Dinkel) 6. CentOS-3 x86_64 errata - Updated php packages fix security issues and bugs (Will Dinkel) 7. CentOS-3 x86_64 errata - Updated kernel packages fix security vulnerabilities (Will Dinkel) 8. CentOS-3 x86_64 errata - Updated SquirrelMail package fixes security vulnerability (Will Dinkel) 9. weird behavior (William Warren) 10. RE: weird behavior (Mike Kercher) 11. Re: Problem with change user (Alexander Georgiev) --__--__-- Message: 1 From: Will Dinkel <wdinkel(a)teamhpc.com> To: centos(a)caosity.org Organization: Team HPC Inc. Date: Mon, 27 Dec 2004 09:39:55 -0600 Subject: [Centos] CentOS-3 x86_64 errata - Updated xscreensaver package --=-TcleWdaudd8Z6g61LtX1 Content-Type: text/plain Content-Transfer-Encoding: quoted-printable A new xscreensaver package is available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHBA-2004-443.html. RPMS/xscreensaver-4.10-8.x86_64.rpm SRPMS/xscreensaver-4.10-8.src.rpm Execute "yum update xscreensaver" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com --=-TcleWdaudd8Z6g61LtX1 Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQBB0CzKHe+le8/eYsoRAqTDAKCcfz8sN8q/263iDI+vA4o2GevazgCfestC +EpUExYDNjT61TfkLu0Ybi4= =vPGY -----END PGP SIGNATURE----- --=-TcleWdaudd8Z6g61LtX1-- --__--__-- Message: 2 From: "Beth Curotto" <bcurotto(a)abni.com> To: "CentOS Mailing List" <centos(a)caosity.org> Date: Mon, 27 Dec 2004 10:21:27 -0600 Subject: [Centos] GRUB bootloader I have raid'd a copy of my system for backup purposes to another hard drive, not deleting the MBR. When I boot with GRUB (Centos 3.3) it now lists multiple instances to boot, but in fact there is only one complete system. Is there a way to delete additional instances from the GRUB bootup screen? Thanks, Beth --__--__-- Message: 3 From: Will Dinkel <wdinkel(a)teamhpc.com> To: centos(a)caosity.org Organization: Team HPC Inc. Date: Mon, 27 Dec 2004 10:14:34 -0600 Subject: [Centos] CentOS-3 x86_64 errata - Updated redhat-config-date package --=-eA3RqMtu7zgx+M+iBOVE Content-Type: text/plain Content-Transfer-Encoding: quoted-printable A new redhat-config-date package is available for CentOS-3 x86_64.=20 Refer to https://rhn.redhat.com/errata/RHBA-2004-435.html. RPMS/redhat-config-date-1.5.22-3.noarch.rpm SRPMS/redhat-config-date-1.5.22-3.src.rpm Execute "yum update redhat-config-date" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com --=-eA3RqMtu7zgx+M+iBOVE Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQBB0DTpHe+le8/eYsoRAq3FAJ9UNa/qy6lq9HMWhsU/xgk9g09SrwCfaVP1 S7kkuTkTAfPqefn6Io4mKVk= =xofo -----END PGP SIGNATURE----- --=-eA3RqMtu7zgx+M+iBOVE-- --__--__-- Message: 4 Date: Mon, 27 Dec 2004 11:18:35 -0500 From: Jacob Robert Wilkins <jrw(a)nplus1.net> To: centos(a)caosity.org Subject: Re: [Centos] GRUB bootloader -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Edit your /boot/grub/grub.conf Remove the old entries. jrw Beth Curotto wrote: | I have raid'd a copy of my system for backup purposes to another hard drive, | not deleting the MBR. When I boot with GRUB (Centos 3.3) it now lists | multiple instances to boot, but in fact there is only one complete system. | Is there a way to delete additional instances from the GRUB bootup screen? | | Thanks, Beth | | | _______________________________________________ | CentOS mailing list | CentOS(a)caosity.org | http://lists.caosity.org/mailman/listinfo/centos -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFB0DXaX4FijV1/J7MRAtDzAJ9tJcln8QJwS6/pNgcFgVJpHrS5DgCdFP9s n4DRRNg6a+BtNS542C1lI/0= =G0Cf -----END PGP SIGNATURE----- --__--__-- Message: 5 From: Will Dinkel <wdinkel(a)teamhpc.com> To: centos(a)caosity.org Organization: Team HPC Inc. Date: Mon, 27 Dec 2004 10:19:10 -0600 Subject: [Centos] CentOS-3 x86_64 errata - Updated redhat-config-services package --=-DCUXxGa57wxhG+Vpp7z3 Content-Type: text/plain Content-Transfer-Encoding: quoted-printable A new redhat-config-services package is available for CentOS-3 x86_64.=20 Refer to https://rhn.redhat.com/errata/RHBA-2004-423.html. RPMS/redhat-config-services-0.8.5-19.RHEL3.1.noarch.rpm SRPMS/redhat-config-services-0.8.5-19.RHEL3.1.src.rpm Execute "yum update redhat-config-services" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com --=-DCUXxGa57wxhG+Vpp7z3 Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQBB0DX+He+le8/eYsoRAggOAJoDBAed5uv1KaPte7MAew56YD8jYgCgx6uq uAINOIHYWVyaqijCWEle3oU= =T4a2 -----END PGP SIGNATURE----- --=-DCUXxGa57wxhG+Vpp7z3-- --__--__-- Message: 6 From: Will Dinkel <wdinkel(a)teamhpc.com> To: centos(a)caosity.org Organization: Team HPC Inc. Date: Mon, 27 Dec 2004 11:05:39 -0600 Subject: [Centos] CentOS-3 x86_64 errata - Updated php packages fix security issues and bugs --=-lTbcee1ZJ4GZFdT+odc8 Content-Type: text/plain Content-Transfer-Encoding: quoted-printable New php packages are available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHSA-2004-687.html. RPMS/php-4.3.2-19.ent.x86_64.rpm RPMS/php-devel-4.3.2-19.ent.x86_64.rpm RPMS/php-imap-4.3.2-19.ent.x86_64.rpm RPMS/php-ldap-4.3.2-19.ent.x86_64.rpm RPMS/php-mysql-4.3.2-19.ent.x86_64.rpm RPMS/php-odbc-4.3.2-19.ent.x86_64.rpm RPMS/php-pgsql-4.3.2-19.ent.x86_64.rpm SRPMS/php-4.3.2-19.ent.src.rpm Execute "yum update php" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com --=-lTbcee1ZJ4GZFdT+odc8 Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQBB0EDjHe+le8/eYsoRAo3cAKC9cB4zoSeVsT5rQLAi9gHWmDJhVACfWV1a F8T/71R3rDdCu9cxm2e756A= =t7u2 -----END PGP SIGNATURE----- --=-lTbcee1ZJ4GZFdT+odc8-- --__--__-- Message: 7 From: Will Dinkel <wdinkel(a)teamhpc.com> To: centos(a)caosity.org Organization: Team HPC Inc. Date: Mon, 27 Dec 2004 12:25:55 -0600 Subject: [Centos] CentOS-3 x86_64 errata - Updated kernel packages fix security vulnerabilities --=-C7lKoPY6X3LNUn2pnNEd Content-Type: text/plain Content-Transfer-Encoding: quoted-printable New kernel packages are available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHSA-2004-689.html. RPMS/kernel-2.4.21-27.0.1.EL.ia32e.rpm RPMS/kernel-2.4.21-27.0.1.EL.x86_64.rpm RPMS/kernel-doc-2.4.21-27.0.1.EL.x86_64.rpm RPMS/kernel-smp-2.4.21-27.0.1.EL.x86_64.rpm RPMS/kernel-smp-unsupported-2.4.21-27.0.1.EL.x86_64.rpm RPMS/kernel-source-2.4.21-27.0.1.EL.x86_64.rpm RPMS/kernel-unsupported-2.4.21-27.0.1.EL.ia32e.rpm RPMS/kernel-unsupported-2.4.21-27.0.1.EL.x86_64.rpm SRPMS/kernel-2.4.21-27.0.1.EL.src.rpm Execute "yum update kernel" or "yum update kernel-smp" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com --=-C7lKoPY6X3LNUn2pnNEd Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQBB0FOwHe+le8/eYsoRAnGUAKC0rYhrVTrklh3aCdMGLiPidqSjbACaAm6U WjiNd/lHFUze/jdjBIGh0+c= =AuBc -----END PGP SIGNATURE----- --=-C7lKoPY6X3LNUn2pnNEd-- --__--__-- Message: 8 From: Will Dinkel <wdinkel(a)teamhpc.com> To: centos(a)caosity.org Organization: Team HPC Inc. Date: Mon, 27 Dec 2004 13:01:39 -0600 Subject: [Centos] CentOS-3 x86_64 errata - Updated SquirrelMail package fixes security vulnerability --=-RPNGGyg3JtEPQ+QR5HMQ Content-Type: text/plain Content-Transfer-Encoding: quoted-printable A new squirrelmail package is available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHSA-2004-654.html. RPMS/squirrelmail-1.4.3a-7.EL3.centos.1.noarch.rpm SRPMS/squirrelmail-1.4.3a-7.EL3.centos.1.src.rpm Execute "yum update squirrelmail" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com --=-RPNGGyg3JtEPQ+QR5HMQ Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQBB0FwSHe+le8/eYsoRAvtyAJ4uhAGOYAMBqWDR5N7GSccbTwuDLwCcCWRp c9KSf9F5MMnM9q9cQ7U+kOw= =m0jw -----END PGP SIGNATURE----- --=-RPNGGyg3JtEPQ+QR5HMQ-- --__--__-- Message: 9 Date: Mon, 27 Dec 2004 15:34:21 -0500 From: William Warren <hescominsoon(a)emmanuelcomputerconsulting.com> To: centos Linux <centos(a)caosity.org> Subject: [Centos] weird behavior i think this is a hlds issue but i am not sure. I ahve file timestamps on my server that are an hour ahead of me..i am in the eastern timezone. when i look at hte system clock though it is on time. Any ideas? -- My "Foundation" verse: Isa 54:17 No weapon that is formed against thee shall prosper; and every tongue that shall rise against thee in judgment thou shalt condemn. This is the heritage of the servants of the LORD, and their righteousness is of me, saith the LORD. -- carpe ductum -- "Grab the tape" CDTT (Certified Duct Tape Technician) --__--__-- Message: 10 From: "Mike Kercher" <mike(a)CamaroSS.net> To: <centos(a)caosity.org> Subject: RE: [Centos] weird behavior Date: Mon, 27 Dec 2004 21:22:02 -0600 Try adding the -r switch to the start command in your initscript for syslog. Then restart syslog and see if that helps. Mike -----Original Message----- From: centos-admin(a)caosity.org [mailto:centos-admin@caosity.org] On Behalf Of William Warren Sent: Monday, December 27, 2004 2:34 PM To: centos Linux Subject: [Centos] weird behavior i think this is a hlds issue but i am not sure. I ahve file timestamps on my server that are an hour ahead of me..i am in the eastern timezone. when i look at hte system clock though it is on time. Any ideas? -- My "Foundation" verse: Isa 54:17 No weapon that is formed against thee shall prosper; and every tongue that shall rise against thee in judgment thou shalt condemn. This is the heritage of the servants of the LORD, and their righteousness is of me, saith the LORD. -- carpe ductum -- "Grab the tape" CDTT (Certified Duct Tape Technician) _______________________________________________ CentOS mailing list CentOS(a)caosity.org http://lists.caosity.org/mailman/listinfo/centos --__--__-- Message: 11 Date: Tue, 28 Dec 2004 12:18:56 +0200 From: Alexander Georgiev <alexander.georgiev(a)gmail.com> Reply-To: Alexander Georgiev <alexander.georgiev(a)gmail.com> To: centos(a)caosity.org Subject: Re: [Centos] Problem with change user Hi, I am also using ldap, and pam ldap module/ I had similar problems with su and oracle, several months ago. It seems that some of the lovely pam libraries crashes. I turned out that the problem is that I had manualy edited /etc/pam.d/system-auth=20 to include ldap pam module. The moment I used the relevant red hat tool - authconfig to add support fot ldap passwords, my problems disappeared. I noticed that system-auth file created by the redhat tool is more complex by my previous variant which I took from a similar debian box. On Thu, 23 Dec 2004 11:36:26 -0300, Cristofer Nicolas Reyes Aguilera <crreyes(a)inf.utfsm.cl> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 >=20 > El Jue 23 Dic 2004 10:40, Ted Kaczmarek escribi=F3: >=20 > > I am guessing that the response from your ldap server is not allowing > > that user access. As you stated, with a non ldap auth user it works. > > Their may also be some pam issue. If you don't get any helpful response > > try the openldap mailing list or the pam mailing list. > > > > Ted >=20 > I've aditional information, the password of postgres is more the 8 charac= ters, > but if I change the password to a small password less the 8 characters th= e > change user work, you've any idea the problem with the password? >=20 > Thanks > - -- > Cristofer Reyes Aguilera linux-user #353991 > http://www.inf.utfsm.cl/~crreyes > Laboratorio de Computacion, Departamento de Informatica, UTFSM > crreyes (at) inf (dot) utfsm (dot) cl > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.2.4 (GNU/Linux) >=20 > iD8DBQFBytfwjvuTr7tY3e8RAhQUAJ93UWnNVUsoqGhzCxdj5m/0goRU0ACfUToB > ktRZsNl5B7yY1P4AJa90ioo=3D > =3Dpthf > -----END PGP SIGNATURE----- > _______________________________________________ > CentOS mailing list > CentOS(a)caosity.org > http://lists.caosity.org/mailman/listinfo/centos > --__--__-- _______________________________________________ CentOS mailing list CentOS(a)caosity.org http://lists.caosity.org/mailman/listinfo/centos End of CentOS Digest

1 0

Problem with change user
by Cristofer Nicolas Reyes Aguilera 28 Dec '04

28 Dec '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi! I'm test CentOS in this moment, before used White Box and I had the same problem when I change from normal user to postgres: [puc@carcel ]$ su - postgres Password: free(): invalid pointer 0x7ed1d0! free(): invalid pointer 0x9af7930! Segmentation fault [puc@carcel ]$ I'm using LDAP, but user "puc" is a local user, if I don't to autentificar whit LDAP the change work. I have tried to do: [puc@carcel ]$ strace su - postgres and between the information what give me it's this: open("/usr/share/locale/en_US.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en_US.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en_US/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) Somebody help me please. - -- Cristofer Reyes Aguilera linux-user #353991 http://www.inf.utfsm.cl/~crreyes Laboratorio de Computacion, Departamento de Informatica, UTFSM crreyes (at) inf (dot) utfsm (dot) cl -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFByrI/jvuTr7tY3e8RAuBoAJwNB6k30zyLnOaO6rEcuux2dTEXvwCfXVcu utZBti/5kL0wsZ7VcZozmqU= =8hV9 -----END PGP SIGNATURE-----

3 3

weird behavior
by William Warren 28 Dec '04

28 Dec '04

i think this is a hlds issue but i am not sure. I ahve file timestamps on my server that are an hour ahead of me..i am in the eastern timezone. when i look at hte system clock though it is on time. Any ideas? -- My "Foundation" verse: Isa 54:17 No weapon that is formed against thee shall prosper; and every tongue that shall rise against thee in judgment thou shalt condemn. This is the heritage of the servants of the LORD, and their righteousness is of me, saith the LORD. -- carpe ductum -- "Grab the tape" CDTT (Certified Duct Tape Technician)

2 1

CentOS-3 x86_64 errata - Updated SquirrelMail package fixes security vulnerability
by Will Dinkel 27 Dec '04

27 Dec '04

A new squirrelmail package is available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHSA-2004-654.html. RPMS/squirrelmail-1.4.3a-7.EL3.centos.1.noarch.rpm SRPMS/squirrelmail-1.4.3a-7.EL3.centos.1.src.rpm Execute "yum update squirrelmail" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com

1 0

CentOS-3 x86_64 errata - Updated kernel packages fix security vulnerabilities
by Will Dinkel 27 Dec '04

27 Dec '04

New kernel packages are available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHSA-2004-689.html. RPMS/kernel-2.4.21-27.0.1.EL.ia32e.rpm RPMS/kernel-2.4.21-27.0.1.EL.x86_64.rpm RPMS/kernel-doc-2.4.21-27.0.1.EL.x86_64.rpm RPMS/kernel-smp-2.4.21-27.0.1.EL.x86_64.rpm RPMS/kernel-smp-unsupported-2.4.21-27.0.1.EL.x86_64.rpm RPMS/kernel-source-2.4.21-27.0.1.EL.x86_64.rpm RPMS/kernel-unsupported-2.4.21-27.0.1.EL.ia32e.rpm RPMS/kernel-unsupported-2.4.21-27.0.1.EL.x86_64.rpm SRPMS/kernel-2.4.21-27.0.1.EL.src.rpm Execute "yum update kernel" or "yum update kernel-smp" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com

1 0

CentOS-3 x86_64 errata - Updated php packages fix security issues and bugs
by Will Dinkel 27 Dec '04

27 Dec '04

New php packages are available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHSA-2004-687.html. RPMS/php-4.3.2-19.ent.x86_64.rpm RPMS/php-devel-4.3.2-19.ent.x86_64.rpm RPMS/php-imap-4.3.2-19.ent.x86_64.rpm RPMS/php-ldap-4.3.2-19.ent.x86_64.rpm RPMS/php-mysql-4.3.2-19.ent.x86_64.rpm RPMS/php-odbc-4.3.2-19.ent.x86_64.rpm RPMS/php-pgsql-4.3.2-19.ent.x86_64.rpm SRPMS/php-4.3.2-19.ent.src.rpm Execute "yum update php" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com

1 0

CentOS-3 x86_64 errata - Updated redhat-config-services package
by Will Dinkel 27 Dec '04

27 Dec '04

A new redhat-config-services package is available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHBA-2004-423.html. RPMS/redhat-config-services-0.8.5-19.RHEL3.1.noarch.rpm SRPMS/redhat-config-services-0.8.5-19.RHEL3.1.src.rpm Execute "yum update redhat-config-services" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com

1 0

GRUB bootloader
by Beth Curotto 27 Dec '04

27 Dec '04

I have raid'd a copy of my system for backup purposes to another hard drive, not deleting the MBR. When I boot with GRUB (Centos 3.3) it now lists multiple instances to boot, but in fact there is only one complete system. Is there a way to delete additional instances from the GRUB bootup screen? Thanks, Beth

2 1

CentOS-3 x86_64 errata - Updated redhat-config-date package
by Will Dinkel 27 Dec '04

27 Dec '04

A new redhat-config-date package is available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHBA-2004-435.html. RPMS/redhat-config-date-1.5.22-3.noarch.rpm SRPMS/redhat-config-date-1.5.22-3.src.rpm Execute "yum update redhat-config-date" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com

1 0

CentOS-3 x86_64 errata - Updated xscreensaver package
by Will Dinkel 27 Dec '04

27 Dec '04

A new xscreensaver package is available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHBA-2004-443.html. RPMS/xscreensaver-4.10-8.x86_64.rpm SRPMS/xscreensaver-4.10-8.src.rpm Execute "yum update xscreensaver" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com

1 0

4beta gpg key
by Henk van Lingen 27 Dec '04

27 Dec '04

Hi, Maybe a stupid question: I just installed centos 4beta on a Dell inspiron 3500 laptop. So far so good. But where do I find the gpg key? Transaction Listing: Update: firefox.i386 0:1.0-6.centos4.2 Is this ok [y/N]: y Downloading Packages: warning: rpmts_HdrFromFdno: V3 DSA signature: NOKEY, key ID 4fe06303 public key not available for //var/cache/yum/update/packages/firefox-1.0-6.centos4.2.i386.rpm I imported the c3 key, but 4fe06303 seems to be another. Regards, -- Henk van Lingen, Systems & Network Administrator (o- -+ Dept. of Computer Science, Utrecht University. /\ | phone: +31-30-2535278 v_/_ http://henk.vanlingen.net/ http://www.tuxtown.net/netiquette/

2 1

new kernels
by William Warren 26 Dec '04

26 Dec '04

I just got done running and installing the new kernels for U4 a day or two ago. I run yum update and now there is a .1 version of the same kernel available. What got changed? -- My "Foundation" verse: Isa 54:17 No weapon that is formed against thee shall prosper; and every tongue that shall rise against thee in judgment thou shalt condemn. This is the heritage of the servants of the LORD, and their righteousness is of me, saith the LORD. -- carpe ductum -- "Grab the tape" CDTT (Certified Duct Tape Technician)

2 1

AMD K6 and CentOS 3.3
by Primorec 24 Dec '04

24 Dec '04

I've downloaded CentOS, baked CDs and start installing it on one old 450MHz AMD K6 based box with 392MB of RAM. To my regret, CentOS refused to load (to be installed). The message on the screen was something along this line: "Your architecture is not supported" I am sure that this is NOT CentoOS fault. It seems to me that RH does NOT support K6 CPU. Is my statement (conclusion) true ? Igor

2 2

CentOS-3 x86_64 errata - Updated VNC packages
by Will Dinkel 24 Dec '04

24 Dec '04

New VNC packages are available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHBA-2004-461.html. RPMS/vnc-4.0-0.beta4.1.4.x86_64.rpm RPMS/vnc-server-4.0-0.beta4.1.4.x86_64.rpm SRPMS/vnc-4.0-0.beta4.1.4.src.rpm Execute "yum update vnc" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com

1 0

CentOS-3 x86_64 errata - Updated openssh packages
by Will Dinkel 24 Dec '04

24 Dec '04

New openssh packages are available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHBA-2004-471.html. RPMS/openssh-3.6.1p2-33.30.3.x86_64.rpm RPMS/openssh-askpass-3.6.1p2-33.30.3.x86_64.rpm RPMS/openssh-askpass-gnome-3.6.1p2-33.30.3.x86_64.rpm RPMS/openssh-clients-3.6.1p2-33.30.3.x86_64.rpm RPMS/openssh-server-3.6.1p2-33.30.3.x86_64.rpm SRPMS/openssh-3.6.1p2-33.30.3.src.rpm Execute "yum update openssh" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com

1 0

CentOS-3 x86_64 errata - Updated shadow-utils package
by Will Dinkel 24 Dec '04

24 Dec '04

A new shadow-utils package is available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHBA-2004-472.html. RPMS/shadow-utils-4.0.3-22.02.x86_64.rpm SRPMS/shadow-utils-4.0.3-22.02.src.rpm Execute "yum update shadow-utils" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com

1 0

CentOS-3 x86_64 errata - Updated redhat-config-printer packages
by Will Dinkel 24 Dec '04

24 Dec '04

New redhat-config-printer packages are available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHBA-2004-473.html. RPMS/redhat-config-printer-0.6.47.3.23-1.x86_64.rpm RPMS/redhat-config-printer-gui-0.6.47.3.23-1.x86_64.rpm SRPMS/redhat-config-printer-0.6.47.3.23-1.src.rpm Execute "yum update redhat-config-printer" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com

1 0

CentOS-3 x86_64 errata - Updated rusers packages
by Will Dinkel 24 Dec '04

24 Dec '04

New rusers packages are available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHBA-2004-477.html. RPMS/rusers-0.17-40.30.2.x86_64.rpm RPMS/rusers-server-0.17-40.30.2.x86_64.rpm SRPMS/rusers-0.17-40.30.2.src.rpm Execute "yum update rusers" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com

1 0

CentOS-3 x86_64 errata - Updated mailman package
by Will Dinkel 24 Dec '04

24 Dec '04

A new mailman package is available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHBA-2004-481.html. RPMS/mailman-2.1.5-23.x86_64.rpm SRPMS/mailman-2.1.5-23.src.rpm Execute "yum update mailman" to apply. Note that RedHat has moved this package from extras into the actual distribution. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com

1 0

CentOS-3 x86_64 errata - Updates ypbind package
by Will Dinkel 24 Dec '04

24 Dec '04

A new ypbind package is available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHBA-2004-485.html. RPMS/ypbind-1.12-5.21.1.x86_64.rpm SRPMS/ypbind-1.12-5.21.1.src.rpm Execute "yum update ypbind" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com

1 0

CentOS-3 x86_64 errata - Updated iputils package
by Will Dinkel 24 Dec '04

24 Dec '04

A new iputils package is available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHBA-2004-492.html. RPMS/iputils-20020927-11.30.1.x86_64.rpm SRPMS/iputils-20020927-11.30.1.src.rpm Execute "yum update iputils" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com

1 0

CentOS-3 x86_64 errata - Updated psacct package
by Will Dinkel 24 Dec '04

24 Dec '04

A new psacct package is available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHBA-2004-497.html. RPMS/psacct-6.3.2-28.rhel3.x86_64.rpm SRPMS/psacct-6.3.2-28.rhel3.src.rpm Execute "yum update psacct" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com

1 0

CentOS-3 x86_64 errata - Updated man-pages package
by Will Dinkel 24 Dec '04

24 Dec '04

A new man-pages package is available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHBA-2004-541.html. RPMS/man-pages-1.60-4.2.noarch.rpm SRPMS/man-pages-1.60-4.2.src.rpm Execute "yum update man-pages" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com

1 0

CentOS-3 x86_64 errata - Updated redhat-config-users package
by Will Dinkel 24 Dec '04

24 Dec '04

A new redhat-config-users package is available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHBA-2004-557.html. RPMS/redhat-config-users-1.1.18-2.noarch.rpm SRPMS/redhat-config-users-1.1.18-2.src.rpm Execute "yum update redhat-config-users" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com

1 0

CentOS-3 x86_64 errata - Updated sysreport package
by Will Dinkel 24 Dec '04

24 Dec '04

A new sysreport package is available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHEA-2004-468.html. RPMS/sysreport-1.3.7.2-2.noarch.rpm SRPMS/sysreport-1.3.7.2-2.src.rpm Execute "yum update sysreport" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com

1 0

CentOS-3 x86_64 errata - Updated rh-postgresql packages
by Will Dinkel 24 Dec '04

24 Dec '04

New rh-postgresql packages are available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHSA-2004-489.html. RPMS/rh-postgresql-7.3.8-2.x86_64.rpm RPMS/rh-postgresql-contrib-7.3.8-2.x86_64.rpm RPMS/rh-postgresql-devel-7.3.8-2.x86_64.rpm RPMS/rh-postgresql-docs-7.3.8-2.x86_64.rpm RPMS/rh-postgresql-jdbc-7.3.8-2.x86_64.rpm RPMS/rh-postgresql-libs-7.3.8-2.i386.rpm RPMS/rh-postgresql-libs-7.3.8-2.x86_64.rpm RPMS/rh-postgresql-pl-7.3.8-2.x86_64.rpm RPMS/rh-postgresql-python-7.3.8-2.x86_64.rpm RPMS/rh-postgresql-server-7.3.8-2.x86_64.rpm RPMS/rh-postgresql-tcl-7.3.8-2.x86_64.rpm RPMS/rh-postgresql-test-7.3.8-2.x86_64.rpm SRPMS/rh-postgresql-7.3.8-2.src.rpm Execute "yum update rh-postgresql" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com

1 0

CentOS-3 x86_64 errata - Updated nfs-utils package fixes security vulnerabilities
by Will Dinkel 24 Dec '04

24 Dec '04

A new nfs-utils package is available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHSA-2004-583.html. RPMS/nfs-utils-1.0.6-33EL.x86_64.rpm SRPMS/nfs-utils-1.0.6-33EL.src.rpm Execute "yum update nfs-utils" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com

1 0

CentOS-3 x86_64 errata - Updated glibc packages
by Will Dinkel 24 Dec '04

24 Dec '04

New glibc packages are available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHSA-2004-586.html. RPMS/glibc-2.3.2-95.30.i686.rpm RPMS/glibc-2.3.2-95.30.x86_64.rpm RPMS/glibc-common-2.3.2-95.30.x86_64.rpm RPMS/glibc-devel-2.3.2-95.30.i386.rpm RPMS/glibc-devel-2.3.2-95.30.x86_64.rpm RPMS/glibc-headers-2.3.2-95.30.x86_64.rpm RPMS/glibc-profile-2.3.2-95.30.x86_64.rpm RPMS/glibc-utils-2.3.2-95.30.x86_64.rpm RPMS/nptl-devel-2.3.2-95.30.x86_64.rpm RPMS/nscd-2.3.2-95.30.x86_64.rpm SRPMS/glibc-2.3.2-95.30.src.rpm and in addons: RPMS/glibc-debug-2.3.2-95.30.x86_64.rpm Execute "yum update glibc" to apply. Will Dinkel Chief Technology Officer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com

1 0

[Fwd: [Fwd: CentOS-3 i386 errata : Updated kernel packages fix security vulnerabilities]]
by Lance Davis 24 Dec '04

24 Dec '04

arrgh - I hate evolution :(

1 0

[Fwd: CentOS-3 i386 errata : Updated kernel packages fix security vulnerabilities]
by Lance Davis 24 Dec '04

24 Dec '04

Sorry - forgot to sign ...

1 0

CentOS-3 errata : Updated kernel packages fix security vulnerabilities
by Lance Davis 24 Dec '04

24 Dec '04

https://rhn.redhat.com/errata/RHSA-2004-689.html Updated files are :- updates/i386/RPMS/kernel-2.4.21-27.0.1.EL.athlon.rpm updates/i386/RPMS/kernel-2.4.21-27.0.1.EL.i686.rpm updates/i386/RPMS/kernel-BOOT-2.4.21-27.0.1.EL.i386.rpm updates/i386/RPMS/kernel-doc-2.4.21-27.0.1.EL.i386.rpm updates/i386/RPMS/kernel-hugemem-2.4.21-27.0.1.EL.i686.rpm updates/i386/RPMS/kernel-hugemem-unsupported-2.4.21-27.0.1.EL.i686.rpm updates/i386/RPMS/kernel-smp-2.4.21-27.0.1.EL.athlon.rpm updates/i386/RPMS/kernel-smp-2.4.21-27.0.1.EL.i686.rpm updates/i386/RPMS/kernel-smp-unsupported-2.4.21-27.0.1.EL.athlon.rpm updates/i386/RPMS/kernel-smp-unsupported-2.4.21-27.0.1.EL.i686.rpm updates/i386/RPMS/kernel-source-2.4.21-27.0.1.EL.i386.rpm updates/i386/RPMS/kernel-unsupported-2.4.21-27.0.1.EL.athlon.rpm updates/i386/RPMS/kernel-unsupported-2.4.21-27.0.1.EL.i686.rpm extras/i386/RPMS/kernel-2.4.21-27.0.1.EL.i586.rpm extras/i386/RPMS/kernel-unsupported-2.4.21-27.0.1.EL.i586.rpm updates/i386/SRPMS/kernel-2.4.21-27.0.1.EL.src.rpm To update run 'yum update kernel' and then you will need to reboot to effect the change. These files are on mirror.centos.org now and should be on all mirrors within a few hours. The changes to the spec file for this build are now detailed in build/kernel-2.4.21-27.0.1.EL.centos3.spec.patch This will make it easier to apply changes in the future and for CentOS users to see what has been changed. Lance

1 0

CentOS-3 i386 errata : Updated squirrelmail package fixes security vulnerability
by Lance Davis 24 Dec '04

24 Dec '04

https://rhn.redhat.com/errata/RHSA-2004-654.html refers Updated files :- updates/i386/RPMS/squirrelmail-1.4.3a-7.EL3.centos.1.noarch.rpm updates/i386/SRPMS/squirrelmail-1.4.3a-7.EL3.centos.1.src.rpm To update run 'yum update squirrelmail' These files are on mirror.caosity.org now and should be on local mirrors within a few hours. Lance

1 0

local yum repository
by Ken Godee 23 Dec '04

23 Dec '04

bit off topic, but.... I've set up my first Centos gateway server and now setting up another server on internal network. I thought it would be nice to use the gateway servers "/var/cache/yum" as a local repository for any internal servers since it would be up to date with the lastest packages and save bandwidth. So... I created a sym link to create a repository through gateways http server, ie. ln -s /var/cache/yum /var/www/html/yum Now internally I can browse the gateways repository with no problem http://192.168.1.1/yum/addons I've set the internal servers yum.conf to, ie. [addons] name=Local - Addons baseurl=http://192.168.1.1/yum/addons/ gpgcheck=0 result.... yum list addons Gathering header info Server: Local - Addons CacheDir: /var/cache/yum/addons Getting header info from server failover: baseURL = http://192.168.1.1/yum/addons/ failover: path = headers/header.info and the just gets stuck there. structure of gateways repostitory... addons/headers/ addons/packages/ addons/header.info ok,so seems yums looking for in the headers dir for the header.info when really in the addons dir. Tried creating s symlink in the headers dir ( ln -s ../header.info header.info) but no go. Any tips, I'm sure I'm missing something simple? or maybe just can't do it how I want to.

3 4

yum issue
by William Warren 23 Dec '04

23 Dec '04

I am trying to update a newly installed server and this is what i get when i yum update: Gathering header information file(s) from server(s) Server: CentOS-3.3 - Addons retrygrab() failed for: http://mirror.centos.org/centos-3/3.3/addons/i386/headers/header.info Executing failover method failover: out of servers to try Error getting file http://mirror.centos.org/centos-3/3.3/addons/i386/headers/header.info [Errno 4] IOError: <urlopen error > I went as far as to redownload and reburn the cd1(which is al i use for setups). Any ideas? -- My "Foundation" verse: Isa 54:17 No weapon that is formed against thee shall prosper; and every tongue that shall rise against thee in judgment thou shalt condemn. This is the heritage of the servants of the LORD, and their righteousness is of me, saith the LORD. -- carpe ductum -- "Grab the tape" CDTT (Certified Duct Tape Technician)

4 3

CentOS-3 x86_64 errata - Updated XFree86 packages fix security issues
by Will Dinkel 22 Dec '04

22 Dec '04

New XFree86 packages are available for CentOS-3 x86_64. Refer to https://rhn.redhat.com/errata/RHSA-2004-612.html. RPMS/XFree86-100dpi-fonts-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-75dpi-fonts-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-ISO8859-14-100dpi-fonts-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-ISO8859-14-75dpi-fonts-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-ISO8859-15-100dpi-fonts-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-ISO8859-15-75dpi-fonts-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-ISO8859-2-100dpi-fonts-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-ISO8859-2-75dpi-fonts-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-ISO8859-9-100dpi-fonts-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-ISO8859-9-75dpi-fonts-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-Mesa-libGL-4.3.0-78.EL.i386.rpm RPMS/XFree86-Mesa-libGL-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-Mesa-libGLU-4.3.0-78.EL.i386.rpm RPMS/XFree86-Mesa-libGLU-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-Xnest-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-Xvfb-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-base-fonts-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-cyrillic-fonts-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-devel-4.3.0-78.EL.i386.rpm RPMS/XFree86-devel-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-doc-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-font-utils-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-libs-4.3.0-78.EL.i386.rpm RPMS/XFree86-libs-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-libs-data-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-sdk-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-syriac-fonts-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-tools-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-truetype-fonts-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-twm-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-xauth-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-xdm-4.3.0-78.EL.x86_64.rpm RPMS/XFree86-xfs-4.3.0-78.EL.x86_64.rpm SRPMS/XFree86-4.3.0-78.EL.src.rpm Execute "yum update XFree86" to apply. Will Dinkel Chief Systems Engineer Team HPC, Inc. 785-542-2135 x304 wdinkel(a)teamhpc.com http://www.teamhpc.com

1 0

httpd trademark issue -- here it is!
by Rick Graves 22 Dec '04

22 Dec '04

Michael, > Is your code Python? If so, you should use the > python rpmlib bindings for this. Yes, my code is written in Python. > Yeah, that's how mine worked too, only it used > version comparison to handle the case where > multiple new updates for the same package > appeared simultaneously ... Good point -- thanks for the tip. I will take a look at rpmlib bindings. Rick --- centos-request(a)caosity.org wrote: Date: Mon, 20 Dec 2004 15:33:20 -0500 From: Michael Jennings <mej(a)caosity.org> To: centos(a)caosity.org Subject: Re: [Centos] httpd trademark issue -- here it is! On Monday, 20 December 2004, at 09:18:48 (-0800), Rick Graves wrote: > Thanks, I am clear on that. My code was sometimes not working > right. I simplified and clarified it, and it is working right now > -- at least on the httpd versions, and I hope on everything else. Is your code Python? If so, you should use the python rpmlib bindings for this. > I am not sure I need to even worry about comparisons on this level. > My program is most concerned about when a *different* version > appears on the public mirrors. So 2.0.46 would be different than > 2.0.127, and my logic presumes the one that appears after supercedes > the one that appeared before. Yeah, that's how mine worked too, only it used version comparison to handle the case where multiple new updates for the same package appeared simultaneously (which can happen if the script doesn't run frequently enough or a quickie-fix is required. Michael

1 0

CentOS-3 i386 errata : additional file for glibc update
by Lance Davis 22 Dec '04

22 Dec '04

updates/RPMS/i386/nscd-2.3.2-95.30.i386.rpm is now on the mirrors Lance

1 0

CentOS-3 i386 errata : Updated glibc packages
by Lance Davis 22 Dec '04

22 Dec '04

https://rhn.redhat.com/errata/RHSA-2004-586.html refers Changed files : updates/i386/RPMS/glibc-2.3.2-95.30.i386.rpm updates/i386/RPMS/glibc-2.3.2-95.30.i686.rpm updates/i386/RPMS/glibc-common-2.3.2-95.30.i386.rpm updates/i386/RPMS/glibc-devel-2.3.2-95.30.i386.rpm updates/i386/RPMS/glibc-headers-2.3.2-95.30.i386.rpm updates/i386/RPMS/glibc-profile-2.3.2-95.30.i386.rpm updates/i386/RPMS/glibc-utils-2.3.2-95.30.i386.rpm updates/i386/RPMS/nptl-devel-2.3.2-95.30.i686.rpm updates/i386/SRPMS/glibc-2.3.2-95.30.src.rpm and in the extras repo extras/i386/RPMS/glibc-2.3.2-95.30.i586.rpm To update to latest versions run yum update These are on mirror.caosity.org now and should be on local mirrors within a few hours. Lance

2 2

Mysql - aah
by Nigel Kendrick 22 Dec '04

22 Dec '04

Ah - 'yum install mysql-server' It's getting late! Thanks anyway

1 0

Mysql B0rked - new install - confused
by Nigel Kendrick 22 Dec '04

22 Dec '04

Hi Folks, I've just done my first two Centos installs, having moved over from WB..er..never mind. I seem to be stuck with mysql - it's not installing; well, on one system it starts but there's no /var/lib/mysql folder or socket file and on the other, mysql just doesn't seem to be there at all. I have done a 'yum remove mysql' and then a 'yum install mysql' on the first system and it's not helped! Can anyone point me in the right direction to put this right. Thanks. NK

2 1

perl dependency problems in dag's repo
by sophana 22 Dec '04

22 Dec '04

Hi I know this might not be the right list. There are some dependency problems with perl packages in dag's repo. This is not the first perl package which doesn't install because of this kind of dependency. Any idea? Resolving dependencies .....Unable to satisfy dependencies Package ldap-account-manager needs perl(Net::SSH::Perl), this is not available. Package ldap-account-manager needs perl(Quota), this is not available. Thanks Sophana

3 3

CentOS-3 i386 errata : Updated nfs-utils package fixes security vulnerabilities
by Lance Davis 22 Dec '04

22 Dec '04

https://rhn.redhat.com/errata/RHSA-2004-583.html refers Updated files : updates/i386/RPMS/nfs-utils-1.0.6-33EL.i386.rpm updates/i386/SRPMS/nfs-utils-1.0.6-33EL.src.rpm To update to the latest versions run 'yum update' These files are on mirror.centos.org now and should be on local mirrors within a few hours. Lance

1 0

Centos-3 i386 Errata: Updated kernel, php and rh-postgresql fix security and bug issues
by seth vidal 21 Dec '04

21 Dec '04

kernel: https://rhn.redhat.com/errata/RHBA-2004-550.html RPMS/kernel-BOOT-2.4.21-27.EL.i386.rpm RPMS/kernel-2.4.21-27.EL.athlon.rpm RPMS/kernel-2.4.21-27.EL.i686.rpm RPMS/kernel-hugemem-2.4.21-27.EL.i686.rpm RPMS/kernel-doc-2.4.21-27.EL.i386.rpm RPMS/kernel-hugemem-unsupported-2.4.21-27.EL.i686.rpm RPMS/kernel-smp-2.4.21-27.EL.athlon.rpm RPMS/kernel-smp-2.4.21-27.EL.i686.rpm RPMS/kernel-smp-unsupported-2.4.21-27.EL.athlon.rpm RPMS/kernel-smp-unsupported-2.4.21-27.EL.i686.rpm RPMS/kernel-source-2.4.21-27.EL.i386.rpm RPMS/kernel-unsupported-2.4.21-27.EL.athlon.rpm RPMS/kernel-unsupported-2.4.21-27.EL.i686.rpm SRPMS/kernel-2.4.21-27.EL.src.rpm php: https://rhn.redhat.com/errata/RHSA-2004-687.html RPMS/php-4.3.2-19.ent.i386.rpm RPMS/php-devel-4.3.2-19.ent.i386.rpm RPMS/php-imap-4.3.2-19.ent.i386.rpm RPMS/php-ldap-4.3.2-19.ent.i386.rpm RPMS/php-mysql-4.3.2-19.ent.i386.rpm RPMS/php-odbc-4.3.2-19.ent.i386.rpm RPMS/php-pgsql-4.3.2-19.ent.i386.rpm SRPMS/php-4.3.2-19.ent.src.rpm rh-postgresql: https://rhn.redhat.com/errata/RHSA-2004-489.html RPMS/rh-postgresql-7.3.8-2.i386.rpm RPMS/rh-postgresql-contrib-7.3.8-2.i386.rpm RPMS/rh-postgresql-devel-7.3.8-2.i386.rpm RPMS/rh-postgresql-docs-7.3.8-2.i386.rpm RPMS/rh-postgresql-jdbc-7.3.8-2.i386.rpm RPMS/rh-postgresql-libs-7.3.8-2.i386.rpm RPMS/rh-postgresql-pl-7.3.8-2.i386.rpm RPMS/rh-postgresql-python-7.3.8-2.i386.rpm RPMS/rh-postgresql-server-7.3.8-2.i386.rpm RPMS/rh-postgresql-tcl-7.3.8-2.i386.rpm RPMS/rh-postgresql-test-7.3.8-2.i386.rpm SRPMS/rh-postgresql-7.3.8-2.src.rpm Extras tree only for i586: RPMS/kernel-2.4.21-27.EL.i586.rpm RPMS/kernel-unsupported-2.4.21-27.EL.i586.rpm These packages are on mirror.caosity.org and should sync to local mirrors within a few hours. To update to the latest version run yum update Thanks, -sv

1 0

CentOS-3 i386 errata : Updated XFree86 packages fix security issues
by Lance Davis 21 Dec '04

21 Dec '04

https://rhn.redhat.com/errata/RHSA-2004-612.html refers Chaged files are :- updates/i386/RPMS/XFree86-100dpi-fonts-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-75dpi-fonts-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-base-fonts-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-cyrillic-fonts-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-devel-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-doc-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-font-utils-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-ISO8859-14-100dpi-fonts-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-ISO8859-14-75dpi-fonts-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-ISO8859-15-100dpi-fonts-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-ISO8859-15-75dpi-fonts-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-ISO8859-2-100dpi-fonts-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-ISO8859-2-75dpi-fonts-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-ISO8859-9-100dpi-fonts-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-ISO8859-9-75dpi-fonts-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-libs-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-libs-data-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-Mesa-libGL-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-Mesa-libGLU-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-sdk-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-syriac-fonts-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-tools-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-truetype-fonts-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-twm-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-xauth-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-xdm-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-xfs-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-Xnest-4.3.0-78.EL.i386.rpm updates/i386/RPMS/XFree86-Xvfb-4.3.0-78.EL.i386.rpm updates/i386/SRPMS/XFree86-4.3.0-78.EL.src.rpm These packages are on mirror.caosity.org and should sync to local mirrors within a few hours. To update to the latest version run yum update Lance

1 0

CentOS-2 errata
by John Newbigin 21 Dec '04

21 Dec '04

The following errata for CentOS-2 have been built and uploaded the the centos mirror: RHSA-2004:681-01 Updated samba packages fix security issue Files available: samba-2.2.12-1.21as.3.i386.rpm samba-client-2.2.12-1.21as.3.i386.rpm samba-common-2.2.12-1.21as.3.i386.rpm samba-swat-2.2.12-1.21as.3.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin - Computer Systems Officer School of Information Technology Swinburne University of Technology Melbourne, Australia http://www.it.swin.edu.au/staff/jnewbigin

1 0

CentOS-2 errata
by John Newbigin 21 Dec '04

21 Dec '04

The following errata for CentOS-2 have been built and uploaded the the centos mirror: RHSA-2004:610-01 Updated XFree86 packages fix security issues Files available: XFree86-100dpi-fonts-4.1.0-64.EL.i386.rpm XFree86-4.1.0-64.EL.i386.rpm XFree86-75dpi-fonts-4.1.0-64.EL.i386.rpm XFree86-ISO8859-15-100dpi-fonts-4.1.0-64.EL.i386.rpm XFree86-ISO8859-15-75dpi-fonts-4.1.0-64.EL.i386.rpm XFree86-ISO8859-2-100dpi-fonts-4.1.0-64.EL.i386.rpm XFree86-ISO8859-2-75dpi-fonts-4.1.0-64.EL.i386.rpm XFree86-ISO8859-9-100dpi-fonts-4.1.0-64.EL.i386.rpm XFree86-ISO8859-9-75dpi-fonts-4.1.0-64.EL.i386.rpm XFree86-Xnest-4.1.0-64.EL.i386.rpm XFree86-Xvfb-4.1.0-64.EL.i386.rpm XFree86-cyrillic-fonts-4.1.0-64.EL.i386.rpm XFree86-devel-4.1.0-64.EL.i386.rpm XFree86-doc-4.1.0-64.EL.i386.rpm XFree86-libs-4.1.0-64.EL.i386.rpm XFree86-tools-4.1.0-64.EL.i386.rpm XFree86-twm-4.1.0-64.EL.i386.rpm XFree86-xdm-4.1.0-64.EL.i386.rpm XFree86-xf86cfg-4.1.0-64.EL.i386.rpm XFree86-xfs-4.1.0-64.EL.i386.rpm More details are available from the RedHat web site at https://rhn.redhat.com/errata/rh21as-errata.html The easy way to make sure you are up to date with all the latest patches is to run: # yum update -- John Newbigin - Computer Systems Officer School of Information Technology Swinburne University of Technology Melbourne, Australia http://www.it.swin.edu.au/staff/jnewbigin

3 2

motherboard to use with CentOS 3
by Zebee Johnstone 21 Dec '04

21 Dec '04

I'm about to build a server. I want to use a P4, and have lotsa RAM, I don't need audio, I do want to do RAID, but I'll do software RAID if hw isn't available for IDE. the RH hardware list seems rather woefully out of date, does anyone have any recommendations for a good motherboard guaranteed to work? I'm looking at ASUS P4P800-E-deluxe which has a driver on the ASUS site for the ethernet card that appears to compile on CentOS, it's a 3Com Gigabit LOM (3C940).. anyone have any reports on this? Zebee

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss