- Discuss - lists.centos.org

Re: [CentOS] reboot - is there a timeout on filesystem flush?
by John R Pierce 07 Jan '15

07 Jan '15

On 1/7/2015 12:50 PM, m.roth(a)5-cent.us wrote: > Right... but only cost 133% (about) more than consumer drives, as opposed > to the 300% that the "server/enterprise" grade drives' cost. well, those $$$ drives are likely SAS rather than SATA, and that has other advantages... 10k or 15k RPM gives you up to double the IOPS per spindle of a 7200rpm SATA drive (and WD Reds are only 5900 RPM, I believe?)... 2.5" enterprise disks let you have more smaller spindles in the same space (24-25 per 2U vs 12 for 3.5") for higher IO concurrency, and SAS supports multipathing (dual porting) for higher IO bandwidth, also SAS has tagged command queueing which often performs better than SATA NCQ under high IO concurrency workloads, like database servers. -- john r pierce 37N 122W somewhere on the middle of the left coast

2 1

Re: [CentOS] reboot - is there a timeout on filesystem flush?
by John R Pierce 07 Jan '15

07 Jan '15

On 1/7/2015 12:15 PM, m.roth(a)5-cent.us wrote: > Actually, the WD Reds and similar are just fine. those are specifically sold for use in small NAS (raid) environments, so yeah, they are configured 'correctly'. -- john r pierce 37N 122W somewhere on the middle of the left coast

1 0

Re: [CentOS] reboot - is there a timeout on filesystem flush?
by Les Mikesell 07 Jan '15

07 Jan '15

On Wed, Jan 7, 2015 at 10:15 AM, <m.roth(a)5-cent.us> wrote: >>> >> Yes - the unattended fsck fails. Personally, I'd prefer for the >> default run to use '-y' in the first place. It's not like I'm more >> likely than fsck to know how to fix it and it is very inconvenient on >> remote machines. The recent case was an opennms system updating a > <snip> > > In some ways, I prefer the fsck run by reboot to fail - that way, I see > it, and it most probably tells me that it's time to look at replacing the > disk. Seems random to me - not repeating on the same box, and rare enough that it is hard to make any generalization except that it is painful to talk some remote helper through the recovery process - usually involving emailing some cell phone photos of the console to figure out which partition has the problem. -- Les Mikesell lesmikesell(a)gmail.com

1 0

Re: [CentOS] Radeon graphics problems with CentOS 6.6
by Darby Vicker 07 Jan '15

07 Jan '15

I sent this last night but it didn't show up in the archives. Trying again without the attachment. Are messages with attachments blocked on this list? On Tue, Jan 6, 2015 at 11:50 PM, Darby Vicker <darby.vicker(a)gmail.com> wrote: > Thanks a ton for the suggestions and info everyone. > >> Two things I think you should consider doing... >> 1) in your next post (and any bugs you open), include the `uname -a` of >> the last known to work correctly CentOS/RHEL kernel, and the `uname -a` >> of the first known to not work correctly CentOS/RHEL kernel and the >> respective versions of radeon &| flrgx drivers. > > Sure. > > Last known kernel to work (pretty sure this is the last update under > CentOS 6.5): > Linux c6 2.6.32-431.29.2.el6.x86_64 #1 SMP Tue Sep 9 21:36:05 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux > > Kernels I've tried that don't work: > > kernel-2.6.32-504.el6.x86_64 > kernel-2.6.32-504.1.3.el6.x86_64 > kernel-2.6.32-504.3.3.el6.x86_64 > kernel-2.6.32-504.3.3.el6.centos.plus.x86_64 > > Graphics card: > > 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek [Radeon HD 6530D] > > Open source driver version: > > xorg-x11-drv-ati-7.3.99-2.el6.x86_64 > > I tried the proprietary drivers from elrepo too: > > fglrx-x11-drv-14.9-1.el6.elrepo.x86_64 > > But it crashes X and also renders the system unreachable via ssh. When > X crashes with the open source driver, I can still get in via ssh. I > can boot to an older kernel with the fglrx drivers but graphics > performance is awful for some reason. > >> 2) try out elrepo's el6 kernel-lt & kernel-ml and see if they work >> correctly for you. I suggest this, because for me it did workaround an >> issue with intel chips (I guess I need to see what it will take to get >> the elrepo folks to make just a back-ported intel driver from 3.17 >> [first known to work again, 3.16 does not]) . >> http://lists.centos.org/pipermail/centos/2014-November/147579.html > > Great suggestion. I just installed and booted the following kernel-ml. > > Linux c6 3.18.1-1.el6.elrepo.x86_64 #1 SMP Tue Dec 16 20:44:33 EST 2014 x86_64 x86_64 x86_64 GNU/Linux > > And it works! I got A LOT of bad-looking errors on boot but it did > boot and everything seems to work fine. I've attached the boot.log > just FYI. I have not tried kernel-lt but I suspect it will work fine > since it would install a 3.10 kernel. (Based on the bugs below this > problem doesn't appear in the 3.X branch until about 3.16). > > After searching the RHEL bug tracker, I do see some very similar bugs > to what I'm experiencing. > https://bugzilla.redhat.com/show_bug.cgi?id=1161321 > https://bugzilla.redhat.com/show_bug.cgi?id=1151757 > > Both are on 3.X kernels under Fedora so not completely applicable. The > first one even has the same graphics card as I do - no activity > though. The second one is also very similar.and in one of the comments > it was suggested to do this: > >> 2) If not, it looks like everyone else is using an ATI Radeon card and >> likely something broke between 3.15 and 3.16. Please boot with "nomodeset" as >> a grub option and report back. If it boots correctly, try modprobing radeon and >> see if the screen goes black right away > > This sounded worthwhile so I booted successfully on the > 2.6.32-504.3.3.el6.x86_64 kernel with "nomodeset". I tried this before > (as described in my xorg thread) and I get a lot of artifacts in the > graphics but it does work. However, the radeon driver is already > loaded after I boot. This is directly after the boot: > > [root@c6 ~]# lsmod | grep rad > radeon 1536476 0 > ttm 81172 1 radeon > drm_kms_helper 82994 1 radeon > drm 291284 3 radeon,ttm,drm_kms_helper > i2c_algo_bit 5711 1 radeon > i2c_core 29964 12 tda18271,s5h1411,cx25840,cx23885,v4l2_common,videodev,tveeprom,i2c_piix4,radeon,drm_kms_helper,drm,i2c_algo_bit > [root@c6 ~]# > > >>> http://bugs.centos.org/view.php?id=4586 >> >> Actually, I ask that people open a new ticket for each request. :) >> >> Akemi > > Akemi, maybe its not clear yet but would you prefer I submit this bug > under the CentOS or RHEL tracker? (And do you know if I can submit to > the RHEL tracker without a RHEL subscription?) Any advice on where to > submit this info to get this fixed in the CentOS 6 line would be > appreciated. >

1 0

Password Must Change using SSSD in Samba 4.1.10
by Ashish Yadav 07 Jan '15

07 Jan '15

Hi, I am trying to implement the *password must change at next logon* in CentOS 6.5 client using sssd 1.11.6 where Samba 4.1.10 is my backend server. Here are the list of things which I have done, 1. I have setup the CentOS to do the Domain login using sssd service. I can able to login into the CentOS client using Domain user's credentials from display and from SSH also, no problem at all. 2. Next thing which I want to implement is that password must change feature into Samba 4.1.10 server. To do that, I have been using Windows 7 ultimate which is already in Domain and I am using RSAT tools for users and groups where I have a option to check "password must change at next logon" option for particular user. After doing that Windows machine is honoring this and telling user to change the password and allowing user to login after changing the password. 3. As far as the CentOS client is concerned, it was not honoring the password must change and allowing user to login without asking for password change using sssd with current password. Here is the configuration file of sssd service, [sssd] config_file_version = 2 services = nss, pam domains = EXAMPLE sbus_timeout = 30 [nss] filter_users = root filter_groups = root reconnection_retries = 3 [pam] reconnection_retries = 3 offline_credentials_expiration = 0 [domain/EXAMPLE] entry_cache_timeout = 600 entry_cache_group_timeout = 600 min_id = 1000 id_provider = ldap auth_provider = krb5 chpass_provider = krb5 ldap_schema = rfc2307bis ldap_uri = ldap://smbad.intra.example.com:390/ ldap_search_base = dc=intra,dc=example,dc=com cache_credentials = true krb5_server = smbad.intra.example.com:8880 krb5_realm= INTRA.EXAMPLE.COM <http://intra.example.com/> ldap_default_bind_dn = cn=admin,dc=intra,dc=example,dc=com ldap_default_authtok_type = password ldap_default_authtok = 6pNEn7Eo3zmz9MxciGLx 4. I have also tried to achieve above thing using command line tool "pdbedit" but without any luck. Here is the link < http://www.samba.org/samba/docs/man/Samba-HOWTO-Collection/passdb.html#pdbe… > which I have followed. Please share your thoughts in order to help me and move forward to solve this problem. Thanks very much and regards, Ashishkumar S. Yadav

1 0

Radeon graphics problems with CentOS 6.6
by Darby Vicker 06 Jan '15

06 Jan '15

Hello, I saw in the CentOS 6.6 release notes that the Xorg ABI has changed but that "This should not concern anyone who uses the default drivers shipped with CentOS." I'm using the ATI drivers in Base but X still fails when I boot a CentOS 6.6 kernel. I was hoping this is a known problem that would get fixed with a kernel update but I'm still having problems with the 2.6.32-504.1.3.el6.x86_64 kernel. Relevant info below. Any ideas? Thanks, Darby [root@c6 ~]# lspci | grep VGA 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek [Radeon HD 6530D] [root@c6 ~]# uname -a Linux c6 2.6.32-431.29.2.el6.x86_64 #1 SMP Tue Sep 9 21:36:05 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux [root@c6 ~]# yum list xorg-x11-drv-ati.x86_64 xorg-x11-drv-ati-firmware.noarch Loaded plugins: fastestmirror, refresh-packagekit, security Loading mirror speeds from cached hostfile * base: repos.dfw.quadranet.com * epel: mirror.compevo.com * extras: repos.dfw.quadranet.com * updates: repos.dfw.quadranet.com Installed Packages xorg-x11-drv-ati.x86_64 7.3.99-2.el6 @base xorg-x11-drv-ati-firmware.noarch 7.3.99-2.el6 @base [root@c6 ~]# Log messages containing "radeon" from booting into the CentOS 6.6 kernel: c6 kernel: [drm] radeon kernel modesetting enabled. c6 kernel: fb: conflicting fb hw usage radeondrmfb vs EFI VGA - removing generic driver c6 kernel: radeon 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 c6 kernel: radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) c6 kernel: radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF c6 kernel: [drm] radeon: 512M of VRAM memory ready c6 kernel: [drm] radeon: 1024M of GTT memory ready. c6 kernel: radeon 0000:00:01.0: firmware: requesting radeon/SUMO_pfp.bin c6 kernel: radeon 0000:00:01.0: firmware: requesting radeon/SUMO_me.bin c6 kernel: radeon 0000:00:01.0: firmware: requesting radeon/SUMO_rlc.bin c6 kernel: [drm] radeon: dpm initialized c6 kernel: radeon 0000:00:01.0: firmware: requesting radeon/SUMO_uvd.bin c6 kernel: radeon 0000:00:01.0: WB enabled c6 kernel: radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801b6e81c00 c6 kernel: radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8801b6e81c0c c6 kernel: radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900229b2118 c6 kernel: radeon 0000:00:01.0: radeon: using MSI. c6 kernel: [drm] radeon: irq initialized. c6 kernel: [drm] Radeon Display Connectors c6 kernel: fbcon: radeondrmfb (fb0) is primary device c6 kernel: radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device c6 kernel: radeon 0000:00:01.0: registered panic notifier c6 kernel: [drm] Initialized radeon 2.37.0 20080528 for 0000:00:01.0 on minor 0 c6 kernel: powernow-k8: Found 1 AMD A6-3600 APU with Radeon(tm) HD Graphics (4 cpu cores) (version 2.20.00) Log messages from booting into the CentOS 6.5 kernel: c6 kernel: [drm] radeon kernel modesetting enabled. c6 kernel: fb: conflicting fb hw usage radeondrmfb vs EFI VGA - removing generic driver c6 kernel: radeon 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 c6 kernel: radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) c6 kernel: radeon 0000:00:01.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF c6 kernel: [drm] radeon: 512M of VRAM memory ready c6 kernel: [drm] radeon: 512M of GTT memory ready. c6 kernel: platform radeon_cp.0: firmware: requesting radeon/SUMO_pfp.bin c6 kernel: platform radeon_cp.0: firmware: requesting radeon/SUMO_me.bin c6 kernel: platform radeon_cp.0: firmware: requesting radeon/SUMO_rlc.bin c6 kernel: radeon 0000:00:01.0: WB enabled c6 kernel: radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801b83aec00 c6 kernel: radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8801b83aec0c c6 kernel: radeon 0000:00:01.0: radeon: using MSI. c6 kernel: [drm] radeon: irq initialized. c6 kernel: [drm] Radeon Display Connectors c6 kernel: [drm] radeon: power management initialized c6 kernel: fbcon: radeondrmfb (fb0) is primary device c6 kernel: radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device c6 kernel: radeon 0000:00:01.0: registered panic notifier c6 kernel: [drm] Initialized radeon 2.30.0 20080528 for 0000:00:01.0 on minor 0 c6 kernel: powernow-k8: Found 1 AMD A6-3600 APU with Radeon(tm) HD Graphics (4 cpu cores) (version 2.20.00) c6 kernel: CPU0: AMD A6-3600 APU with Radeon(tm) HD Graphics stepping 00

6 11

CentOS-announce Digest, Vol 119, Issue 1
by centos-announce-request＠centos.org 06 Jan '15

06 Jan '15

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2015:0002 CentOS 6 autofs BugFix Update (Johnny Hughes) 2. CEBA-2015:0006 CentOS 5 nss_db BugFix Update (Johnny Hughes) 3. CEBA-2015:0003 CentOS 6 dovecot BugFix Update (Johnny Hughes) 4. CEBA-2015:0005 CentOS 6 gdbm FASTTRACK BugFix Update (Johnny Hughes) 5. CEBA-2015:0007 CentOS 7 mariadb BugFix Update (Johnny Hughes) 6. Improvements in the docker registry for CentOS (Jim Perrin) 7. CESA-2015:0008 Low CentOS 7 libvirt Security Update (Johnny Hughes) 8. Infra - CentOS hardware move [cbs] (Fabian Arrotin) ---------------------------------------------------------------------- Message: 1 Date: Mon, 5 Jan 2015 11:54:59 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:0002 CentOS 6 autofs BugFix Update Message-ID: <20150105115459.GA34587(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:0002 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-0002.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 791e92b38ed363ee16ccb14e67886fa043fc61b78410e5458d8850aac0eb38e9 autofs-5.0.5-109.el6_6.1.i686.rpm x86_64: 7bcd267ca01b2c066570f94f1995abe4914e3f200b01163904e6206776a78319 autofs-5.0.5-109.el6_6.1.x86_64.rpm Source: 304e3d53ec5b2fafa76efb9ad403cfa58450ca62eda799fe8d4a4517eefaa3ce autofs-5.0.5-109.el6_6.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 5 Jan 2015 11:44:01 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:0006 CentOS 5 nss_db BugFix Update Message-ID: <20150105114401.GA20917(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:0006 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-0006.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: b321179fd1a8daee28d28f2f13bd60effb39cf1cdf4304eedef58b78a0eb4eef nss_db-2.2-38.el5_11.i386.rpm x86_64: b321179fd1a8daee28d28f2f13bd60effb39cf1cdf4304eedef58b78a0eb4eef nss_db-2.2-38.el5_11.i386.rpm c2b5f3a8a8035791ecca4ff65824b800e7bdb631ba9ece5422df6ef287f4ea37 nss_db-2.2-38.el5_11.x86_64.rpm Source: dccdca10a0dab429227be07c89a86e132818ead10015d00bd95a0bb79f3097dc nss_db-2.2-38.el5_11.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Mon, 5 Jan 2015 11:55:44 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:0003 CentOS 6 dovecot BugFix Update Message-ID: <20150105115544.GA34886(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:0003 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-0003.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: f5dfa398b4a4814d0b3df88c08f438d027786a0b6c7fabd68457bd770015ec8f dovecot-2.0.9-8.el6_6.4.i686.rpm 078ae9c95a9f2136d29b1688ec9dd15dd66df69767c24ada02836b09f8d5a6c5 dovecot-devel-2.0.9-8.el6_6.4.i686.rpm 374a25e24922394e495c00c40e13fd0c351ce0d8986352e735a48c7929e12a74 dovecot-mysql-2.0.9-8.el6_6.4.i686.rpm 6c3d38ef793830170c8c16d44df855f256ef12371ffa661756ff52e0fb714fbe dovecot-pgsql-2.0.9-8.el6_6.4.i686.rpm 420a71aab3bb3217280308e261f3c9c953e443be745fee06ff5343ff58bfc4ab dovecot-pigeonhole-2.0.9-8.el6_6.4.i686.rpm x86_64: f5dfa398b4a4814d0b3df88c08f438d027786a0b6c7fabd68457bd770015ec8f dovecot-2.0.9-8.el6_6.4.i686.rpm da78ffbf581dea0507ad136791af11ffd553490dce8244c8457242cbb20378b6 dovecot-2.0.9-8.el6_6.4.x86_64.rpm 32b47811c8eeb596ce5b892a877c250d2512f0a83ce2290fe091dc137b2fcadd dovecot-devel-2.0.9-8.el6_6.4.x86_64.rpm 8669e89382754b87b36079d43d27944f2b3a0e2637b9d171874a0b04a24ae7f2 dovecot-mysql-2.0.9-8.el6_6.4.x86_64.rpm a123529a8f012844ddd4eff3755800dd0a180b75ad669b966794aec09e22aee6 dovecot-pgsql-2.0.9-8.el6_6.4.x86_64.rpm c064292f212fb4b4edef71f4c2518878b55f240c184265f78bc03f823875aedc dovecot-pigeonhole-2.0.9-8.el6_6.4.x86_64.rpm Source: 538bbc8052567ca446567d6b2add3d0c14d1f07812bef9024727e1eb6a26a82f dovecot-2.0.9-8.el6_6.4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Mon, 5 Jan 2015 11:57:09 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:0005 CentOS 6 gdbm FASTTRACK BugFix Update Message-ID: <20150105115709.GA35122(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:0005 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-0005.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 660911546c55027459a45ff052f1f538072a3e97b3e3c789d6926f19978cefc7 gdbm-1.8.0-37.el6.i686.rpm d9268699f04486515df65718b9340c676e5c55aba257de0df560f91d77cea9ec gdbm-devel-1.8.0-37.el6.i686.rpm x86_64: 660911546c55027459a45ff052f1f538072a3e97b3e3c789d6926f19978cefc7 gdbm-1.8.0-37.el6.i686.rpm be5f38297022d57bd20d8563e87c76b6d88620c9802dc9e3433b34936f3201f3 gdbm-1.8.0-37.el6.x86_64.rpm d9268699f04486515df65718b9340c676e5c55aba257de0df560f91d77cea9ec gdbm-devel-1.8.0-37.el6.i686.rpm cb56818edd087de2c9494be61a6d633003689a3d1b957d0804f402101d6d333f gdbm-devel-1.8.0-37.el6.x86_64.rpm Source: 049cc6bbcceadea2f73a4fe1b99f907bc19d4daa4a02e1bfd06517116ceaef9e gdbm-1.8.0-37.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Mon, 5 Jan 2015 16:55:07 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2015:0007 CentOS 7 mariadb BugFix Update Message-ID: <20150105165507.GA57424(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2015:0007 Upstream details at : https://rhn.redhat.com/errata/RHBA-2015-0007.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: db6838c6927001b1697a9957ff3a808cf6d6a9b75bd0ee82d84e48d3ef866230 mariadb-5.5.40-2.el7_0.x86_64.rpm 3b3a1a61e88b0ab7b7daffe1ac291ba74c8c87ad4de04a552e9b0c9eb836b381 mariadb-bench-5.5.40-2.el7_0.x86_64.rpm b0609f33ae880a70a2ca277085aa6d54d7eaaaf58d65fe9260391ef306156621 mariadb-devel-5.5.40-2.el7_0.i686.rpm 3f7b4806026c1a7fce519184a8065809655b2ec61434eedadf8e280180938ee8 mariadb-devel-5.5.40-2.el7_0.x86_64.rpm 94398a2599786196a7b1a4a2afeb9b5cad29d2d20063bee8620e3957c9fd8daa mariadb-embedded-5.5.40-2.el7_0.i686.rpm 32385d45480c7501ce48ca75d74800f7a916df2d1a7d7368490e0adde9e4b5a8 mariadb-embedded-5.5.40-2.el7_0.x86_64.rpm 8c324b566d62e94fc2bbfaf8ae39a8a5387849cc15f44465e06b1ec1ae667c4f mariadb-embedded-devel-5.5.40-2.el7_0.i686.rpm 5ddbd46ca51b95fc3b6550903d6b6e739699f26d7ad04973dfcbf08958823758 mariadb-embedded-devel-5.5.40-2.el7_0.x86_64.rpm 9fc910f8f0e7b904151418f6482e5e65f04cc0905704b7c294eb318ecb7143f4 mariadb-libs-5.5.40-2.el7_0.i686.rpm b691fb6c023ca8774e4fc2e7e3e37cd7d8dc3193d7306968ae63fa5e7caba936 mariadb-libs-5.5.40-2.el7_0.x86_64.rpm 3a7138879e66dc71b98a628af34cf6a22366472a429cca393f1891c8b4ba9f39 mariadb-server-5.5.40-2.el7_0.x86_64.rpm 6bb25d002d49a3757a8ca6c335041e5b9a588702befc455ddc910ef65b698c56 mariadb-test-5.5.40-2.el7_0.x86_64.rpm Source: 00953a25e858b98b9085c73a4556cb49d6d9de486562965da75bc54eccdbc8ba mariadb-5.5.40-2.el7_0.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Mon, 05 Jan 2015 15:27:00 -0600 From: Jim Perrin <jperrin(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] Improvements in the docker registry for CentOS Message-ID: <54AB01A4.2030601(a)centos.org> Content-Type: text/plain; charset=utf-8 The CentOS images in the docker index have been bumped to 20150102. Additionally there are numbering scheme improvements requested by the community. Fixes ===== 1. All updates through 20150101 applied to rolling builds Enhancements ============ 1. Minor version tags - 5.11, 6.6, and 7.0.1406 These builds are built from install media only. They do not contain updates and will not be updated as part of the rolling/monthly builds. They are meant for use by those with specific vendor versioning requirements. Users are responsible for ensuring that the images are updated as needed via a 'yum update -y' in their Dockerfiles or other method. 2. Short names Users can now use short names to identify specific docker image tags. For example: centos:6 in place of centos:centos6. Both names are now valid and point to the same images. Additional Information ====================== For detailed information or to see the code differences used in building the images, please see https://github.com/CentOS/sig-cloud-instance-build -- Jim Perrin The CentOS Project | http://www.centos.org twitter: @BitIntegrity | GPG Key: FA09AD77 ------------------------------ Message: 7 Date: Mon, 5 Jan 2015 23:41:12 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2015:0008 Low CentOS 7 libvirt Security Update Message-ID: <20150105234112.GA8196(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2015:0008 Low Upstream details at : https://rhn.redhat.com/errata/RHSA-2015-0008.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 894858978b69bdb598f5204f77acb5e4ea6693e38d65abe97b5ef58e32ae2c5a libvirt-1.1.1-29.el7_0.4.x86_64.rpm 4b24e70f8b6d5e7e0d973b7a42d7827d049f4f12a4742efcc37977ba275f3f3f libvirt-client-1.1.1-29.el7_0.4.i686.rpm 4f4bf92a200e2543f29dbfe1c5e47153b30243a216d9879c826bef1ea5be12e7 libvirt-client-1.1.1-29.el7_0.4.x86_64.rpm e40b51fbf2ccb1e44d75faaf26b73ce1a0ed79d1d03b41155a298be6e4465d50 libvirt-daemon-1.1.1-29.el7_0.4.x86_64.rpm 09495b7515cb91f6790968c9a029787767f65d2c51e28d1bb32803272ee607c0 libvirt-daemon-config-network-1.1.1-29.el7_0.4.x86_64.rpm 52e4920ecafa3b44e9af130acbf5706ccdf3d85d5a4c5939ee86dc007438a9eb libvirt-daemon-config-nwfilter-1.1.1-29.el7_0.4.x86_64.rpm e6bc0cae1e22179e0f64f2c555183851597052b42d1a52d7cff288aa409b6bf0 libvirt-daemon-driver-interface-1.1.1-29.el7_0.4.x86_64.rpm 16bf347b148a48526afebc5d9840cec1e57542a0fc9304b96117747f05d6daed libvirt-daemon-driver-lxc-1.1.1-29.el7_0.4.x86_64.rpm 2261a527f83dece82d5c38cbaeac4debfd2b0313c91015c87be0707f3cd706bf libvirt-daemon-driver-network-1.1.1-29.el7_0.4.x86_64.rpm 758221a54876d0ce0f77d05e69e623d73a683e30916bcfa89e9063922ab4e95c libvirt-daemon-driver-nodedev-1.1.1-29.el7_0.4.x86_64.rpm 64f4de7b7aa01e614eeb02b9837fd2b77b3709879b751c357f4870b0b5d62875 libvirt-daemon-driver-nwfilter-1.1.1-29.el7_0.4.x86_64.rpm c8117765d8c082244ba68804321507940fff9be04d4667ea56922358173e0713 libvirt-daemon-driver-qemu-1.1.1-29.el7_0.4.x86_64.rpm 9ac66d58a4a8cf7dbec7372f100f8e65ae3cd8b4bd49f6356e3495a1c56b884d libvirt-daemon-driver-secret-1.1.1-29.el7_0.4.x86_64.rpm aaa8acc5a5bbbb05c7b0901e10aab024f985077473be54c7ca059629ebbe710c libvirt-daemon-driver-storage-1.1.1-29.el7_0.4.x86_64.rpm 928dda55b177563b31a726e37c250e39e78fb92f68525599bcda68591921c393 libvirt-daemon-kvm-1.1.1-29.el7_0.4.x86_64.rpm 3b938d206208214bf94f57f48bb95f59b6ff02aeb6b41df48c71e77249287b5e libvirt-daemon-lxc-1.1.1-29.el7_0.4.x86_64.rpm c3c7ee1dbd35e6fcef24bff0aac59babba0a75239ee79195a868f6903ea90347 libvirt-devel-1.1.1-29.el7_0.4.i686.rpm d41dda70cc56438b9116c93dfdfe6ff09185958616a2a875869cd447e1e6077f libvirt-devel-1.1.1-29.el7_0.4.x86_64.rpm f56695af42c48cbc5e531bc05c2b09fb330764308f81887e24d0c1894a80f3d4 libvirt-docs-1.1.1-29.el7_0.4.x86_64.rpm 796ddcea38e014b73cb279d3352196f860cd0ddb3bc0b3d598d8271ef166b5e1 libvirt-lock-sanlock-1.1.1-29.el7_0.4.x86_64.rpm 1009596eb54c376ccc644f98e01306344bbdc5c3be9175ab0c6affd2dbcac2a8 libvirt-login-shell-1.1.1-29.el7_0.4.x86_64.rpm e20301bfee52f98e24a0b54a4b35327a8e7168d00de66916298b89334ff4f42f libvirt-python-1.1.1-29.el7_0.4.x86_64.rpm Source: d9a38c5ca9d6b5c44eb30f485889b51138564c02cbb59580cf6b43488a4d0ef4 libvirt-1.1.1-29.el7_0.4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 8 Date: Tue, 06 Jan 2015 08:57:16 +0100 From: Fabian Arrotin <arrfab(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] Infra - CentOS hardware move [cbs] Message-ID: <54AB955C.6020407(a)centos.org> Content-Type: text/plain; charset=utf-8 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Due to a hardware move (machines needing to be powered off, moved in another rack) , some CentOS.org services will be unreachable for a short period of time. Impacted services : * cbs/Community Build System (aka http://cbs.centos.org) Koji web/hub and builders will be down Migration is scheduled for Thursday January 8th, 3:00 pm UTC time. You can convert to local time with $(date -d '2015-01-08 15:00 UTC') The expected "downtime" is estimated to ~30 minutes , time needed to power down, move machines in the rack, power back on Thanks for your comprehending and patience. on behalf of the Infra team, - -- Fabian Arrotin The CentOS Project | http://www.centos.org gpg key: 56BEC54E | twitter: @arrfab -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEARECAAYFAlSrlVwACgkQnVkHo1a+xU6TagCfQkl3slznEBdQ8T8VYKEcY4AM SDYAnRC0zm+NmlsSVcHoc5b4nHZSN59P =DR4a -----END PGP SIGNATURE----- ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 119, Issue 1 ***********************************************

1 0

subscription of Cent - OS newletter
by Bijesh Maskey 05 Jan '15

05 Jan '15

Dear Sir/ Ma'am i would like to suscribe to the cenos newletter its update and patches release thanks regards b -- Bijesh Maskey 97719801095233

3 3

additional network config
by ken 05 Jan '15

05 Jan '15

A system whose network routing table looks like this (abbreviated): Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 needs to look like this: Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.10.0.0 192.168.0.98 255.255.0.0 UG 0 0 0 eth0 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 The first table is nicely configured by the files under /etc/sysconfig/. The first table becomes the second when this command is run: route add -net 10.10.0.0/16 gw 192.168.0.98 eth0 The question is, which file(s) need to be configured under /etc/sysconfig/-- and with what-- in order to accomplish what the "route add ..." command does?

2 2

Fetchmail multiple instances increasing load average
by Anshul Chauhan 04 Jan '15

04 Jan '15

Hi, I’m running centos 5.7 with sendmail-8.13.8-8.1.el5_7, fetchmail-6.3.6-4.el5 and procmail-3.22-17.1.el5.centos. My server is having around 2000 mailboxes and this server used to fetch mails for all these users using fetchmail from the other MX server. I’ve configured the below cron job using webmin for downloading these mail 5,10,15,20,25,30,35,40,45,50,55 * * * * /etc/webmin/fetchmail/check.pl --file /var/log/fetchmaillog. But the load average for the server goes high automatically after every 4 to 5 hours due to multiple fetchmail instances and after that I’ve to either kill all the fetchmail jobs or restart the server for making the system up again. Kindly suggest how can i reduce this load average issue or any other way out for downloading the mails from the parent server running on sendmail again. Warm Regards, Anshul Chauhan

3 2

Re: [CentOS] Design changes are done in Fedora
by James B. Byrne 03 Jan '15

03 Jan '15

On Wed, December 31, 2014 12:03, Warren Young wrote: > > So, cope with change. > Is one to infer from your mantra 'cope with change' that one is not supposed to express any opinion whatsoever, ever, on any forum; on the externalised cost of changes made to software with no evident technical justification? And that to do so is evidence of some moral or intellectual defect in oneself? We all cope with change until we die. That is not a philosophy or program. It is an observation on the state of existence; and is no more useful than the observation that, eventually, we all die. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

4 3

Sun Microsystems Quad gigabit ethernet nic compatibility
by mechy2k2000 03 Jan '15

03 Jan '15

Hello I am thinking of buying this card to and wanted to know if this NIC is supported. The card is a Sun Microsystems PCI-X Quad-Port Gigabit Ethernet Adapter QGEXPCI 501-6738-10. Can't find any info on how well the card plays with centos and also proxmox ve (if any of you use that distro ) If things don't seem to work I may bite the bullet and buy an Intel card thanks Rafeal Stewart

5 5

Re: [CentOS] how to delete a trashed kernel
by Don Vogt 03 Jan '15

03 Jan '15

Message: 8 On Jan 1, 2015, at 3:49 PM, Don Vogt <dnvot(a)yahoo.com> wrote: > when I select the second kernel it boots OK. Now I would like to remove the bad kernel. The only thing that makes this tricky is that you can?t just say ?rpm -e kernel? because there is more than one ?kernel? package installed. You need to know the exact package name. >> I?m assuming you?re using EL7 and you told it you wanted your user to be a >> trusted admin during install. Otherwise, you might need to su up to root to do >> this. Alas, sudo is not universal: > I have never noticed a "centos-plus" in a kernel name before. Does the centos-plus repo deal out kernels? >>Clearly, the answer is ?yes?. thanks. >> I would appreciate any advice (except "go back to windows?) >You asked for it: Get and read some good books on Linux. I had some books on Unix when I started with Slackware. I downloaded it over Ftp from MIT, I believe it was Slackware 0.8. (maybe 1.0). It came on about 25 floppy disks and (with a 300baud modem) I could only do about two a night. I believe I got in trouble this time while building a centos7 partition. I had some problems getting the music to play and I went back and forth between centos6 and centos7 to see what packages I need (Centos6 was working fine). I think my initial problem was that Rpmforge doesn't have centos7. Thanks for the help. Centos6 and centos7 are now working fine (except 7 only boots about every other try- which I am still working on - I think the bios boot my Hard drives in somewhat random order and I haven't been able to come up with the proper system map -- or it may be a mixup with two SATA drives and an IDE. Pulling the power plug on the IDE drive fixes it.) I will go back to lurking.

1 0

how to delete a trashed kernel
by Don Vogt 03 Jan '15

03 Jan '15

I have a screwed up disk arrangement, but I have had no trouble because of it after using it over a year. Recently I did a yum update. After starting the update, which included a new kernel, it seemed to either freeze or loop. It was a long time at the prompt and I got impatient and did a Ctrl C. I then tried to re-boot. The result was a kernel panic. I am keeping 5 kernels and when I select the second kernel it boots OK. Now I would like to remove the bad kernel. One other thing that I don't understand and may be relevant, the name of the bad package is kernel-2.6.32-504.3.3.el6.centos-plus.i386 I have never noticed a "centos-plus" in a kernel name before. Does the centos-plus repo deal out kernels?I have tried yum remove and "gpk application" (add and remove software) with no luck.I have tried google, but all the solutions for kernel deletions were to delete old kernels. I don't want to do that because I would be deleting my backups. I am in no hurry because I can still boot and it is possible that if I can wait through several kernel updates yum might delete the bad one after an update. I should have mentioned that I am using grub2 to boot, although I don't think that has anything to do with deleting the kernel package.I would appreciate any advice (except "go back to windows")

2 1

ulogd / ulogd packages?
by Adam Tauno Williams 02 Jan '15

02 Jan '15

I am looking for ulog-2.0.x packages and the best I have been able to find [for CentOS6] has been ulog-2.0.0 (which is not an exciting prospect for .0 reasons). Is anyone aware of ulogd packages for CentOS6 [x86_64]? I am kind of surprised this isn't standard fair. -- Adam Tauno Williams <mailto:awilliam@whitemice.org> GPG D95ED383 Systems Administrator, Python Developer, LPI / NCLA

1 0

Secret incantations for virt-viewer?
by Bill Gee 02 Jan '15

02 Jan '15

Hello everyone - I am trying to use virt-viewer to connect to KVM virtual machines running on a CentOS7 host. It works great when running directly on the host, but I have not been able to figure out the magic connection string to make it work from another computer. On the host, I set selinux to "permissive" and stopped the firewalld service. No change, so it is not related to them. Almost every command I try gives an immediate dialog box that says "Unable to connect to libvirt with URI ...". The only command line that gets me anything different is this: virt-viewer --connect xen+ssh://root@practice7.billgee.local/ dd2a2ba7-707d-42b5-8c83-94b11ce6e269 This will ask me for the root password on the host machine and then gives me the same "Unable to connect" message. I tried it with a regular user account instead of root and got the same result. I have tried it with and without the "root@" string. I tried using both the UUID and the domain name of the guest. I tried all of the following protocols: ssh:// qemu:// qemu:/// xen:// xen+ssh:// qemu_ssh:// qemu+ssh:// If I open a regular ssh shell using the +X parameter and then launch virt- viewer, it works. The connection string in that case is --connect=qemu:///system Any suggestions? Thanks - Bill Gee

4 8

Happy New Year!
by Ljubomir Ljubojevic 01 Jan '15

01 Jan '15

On behalf of the CentOS project I wish you Happy New Year! Happy New Year! -- Ljubomir Ljubojevic (Love is in the Air) PL Computers Serbia, Europe StarOS, Mikrotik and CentOS/RHEL/Linux consultant

6 5

Re: [CentOS] Design changes are done in Fedora
by Warren Young 31 Dec '14

31 Dec '14

On Dec 31, 2014, at 11:00 AM, m.roth(a)5-cent.us wrote: > Warren Young wrote: >> >> How many single computers have to be up 24/7? > > A hundred or more, here, individual servers, 24x7. I’m more interested in a percentage than absolute values. And I’m only interested in boxes that simply cannot go down for a bit of maintenance every now and then. As counterexamples, DNS, NTP, and SMTP servers are out, because these protocols were explicitly designed to cope with short temporary outages. > Home directory servers, > backup servers, compute nodes, some of which have jobs that run for days, > or a week or two, and that's not counting the clusters that do the same... > and mostly dump the data to home or project directories. That’s all possible to work around. Home servers: SAN design points the way. Backup servers: Ditto if you mean home directory mirrors. If you mean hot failover nodes in a cluster, I already pointed out that clusters let you upgrade via temporary partitioning. Compute nodes: I didn’t ask how many boxes you have that share the same 9/5/180 usage pattern of our customers. I asked how many you have that must run 24/7/365 or Bad Things happen. When a job that’s been running for 2 weeks finishes, there’s your maintenance window. Take it if you need it, let it go if you don’t.

1 0

X11 console
by Andreas Benzler 31 Dec '14

31 Dec '14

Hello Guys… I need to revert the X11 graphical server to Console 7. and enable VT1 as normal text as it was on the old distr.. Sincerely AndyBe

10 9

CentOS 6.6 - net-snmp process - Too many open files
by Laurent Dumont 31 Dec '14

31 Dec '14

Hi gents, I have a CentOS 6.6 install with net-snmp running. I'm using SNMPv3 Auth and Encryption with Observium polling devices every five minutes. On one of my Centos server, the net-snmp process will die after 24-36 hours of running. It seems to be hitting my system maximum file open limit which is set to 1024. > [root@mail net-snmp-5.7]# ulimit -n > 1024 That number will keep increasing till it trips the 1024 limit. > [root@mail ~]# lsof -p 26907 | wc -l > 1071 > [root@mail net-snmp-5.7]# lsof -p 26907 > snmpd 26907 root 166r REG 0,3 0 4026532160 > /proc/26907/net/sctp/snmp > snmpd 26907 root 167r REG 0,3 0 4026532160 > /proc/26907/net/sctp/snmp > snmpd 26907 root 168r REG 0,3 0 4026532160 > /proc/26907/net/sctp/snmp > snmpd 26907 root 169r REG 0,3 0 4026532160 > /proc/26907/net/sctp/snmp > snmpd 26907 root 170r REG 0,3 0 4026532160 > /proc/26907/net/sctp/snmp > snmpd 26907 root 171r REG 0,3 0 4026532160 > /proc/26907/net/sctp/snmp > snmpd 26907 root 172r REG 0,3 0 4026532160 > /proc/26907/net/sctp/snmp > snmpd 26907 root 173r REG 0,3 0 4026532160 > /proc/26907/net/sctp/snmp > snmpd 26907 root 174r REG 0,3 0 4026532160 > /proc/26907/net/sctp/snmp > snmpd 26907 root 175r REG 0,3 0 4026532160 > /proc/26907/net/sctp/snmp > snmpd 26907 root 176r REG 0,3 0 4026532160 > /proc/26907/net/sctp/snmp > snmpd 26907 root 177r REG 0,3 0 4026532160 > /proc/26907/net/sctp/snmp > snmpd 26907 root 178r REG 0,3 0 4026532160 > /proc/26907/net/sctp/snmp > snmpd 26907 root 179r REG 0,3 0 4026532160 > /proc/26907/net/sctp/snmp > #tail /var/log/snmpd.log > cannot open /proc/net/dev ... > /proc/partitions: Too many open files > /proc/stat: Too many open files > /proc/partitions: Too many open files > /proc/stat: Too many open files > could not create socket > /proc/partitions: Too many open files > /proc/stat: Too many open files > cannot open /proc/net/dev ... > /proc/partitions: Too many open files > /proc/stat: Too many open files > /proc/partitions: Too many open files > /proc/stat: Too many open files It seems that CentOS is frozen to net-snmp 5.5 and I'm don't really want to use anything that I can't easily manage with "yum". The weird thing is that I have another server with the same config/CentOS version/Net-Snmp version and I have no issues with the snmp process on that server. I could raise the open file limit but that just seems unnecessary since I don't think that snmp is supposed to work that way. Anything else I could try to troubleshoot the issue? Thanks!

1 0

Re: [CentOS] can't enable selinux CentOS 6.5
by James B. Byrne 31 Dec '14

31 Dec '14

On Tue, December 30, 2014 03:18, Digimer wrote: > What possible reason could they have for that? > > On 30/12/14 02:17 AM, Laurent Dumont wrote: >> By any change, is it a VPS? I know that my CloudAtCost (very cheap but >> extremely unreliable provider) prevents you from using SeLinux on their >> Centos image. No mysterious breakages == lower support costs. The same reason MicroSoft shipped everything on and open for years and thereby built up the malware industry from scratch. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

4 4

sound oddity on C6
by Fred Smith 31 Dec '14

31 Dec '14

I just encountered an oddity... it may have been this way for millennia :) but somehow I've never noticed it before... say I'm using X (which is pretty normal these days) and I have VLC playing a "radio" station. I do CTRL-ALT-Fx to switch to a text console THAT HAS NO ONE LOGGED IN on it, and voila: no sound! as soon as I log in, the audio returns. what gives here? -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- "For the word of God is living and active. Sharper than any double-edged sword, it penetrates even to dividing soul and spirit, joints and marrow; it judges the thoughts and attitudes of the heart." ---------------------------- Hebrews 4:12 (niv) ------------------------------

2 2

Documentation for upstart
by Robert Nichols 31 Dec '14

31 Dec '14

Is there any documentation for the upstart-0.6.5 used in CentOS 6? All I can find online is for much newer versions. -- Bob Nichols "NOSPAM" is really part of my email address. Do NOT delete it.

1 0

Re: [CentOS] Secret incantations for virt-viewer?
by Bill Gee 30 Dec '14

30 Dec '14

On Tuesday, December 30, 2014 16:15:45 m.roth(a)5-cent.us wrote: > Bill Gee wrote: > > On Tuesday, December 30, 2014 13:01:57 SilverTip257 wrote: > >> On Tue, Dec 30, 2014 at 9:58 AM, Marcelo Roccasalva < > >> > >> marcelo-centos(a)irrigacion.gov.ar> wrote: > >> > On Tue, Dec 30, 2014 at 11:46 AM, Bill Gee <bgee(a)campercaver.net> > >> > >> wrote: > <snip> > > > Thanks! I changed the qemu.conf file to listen on 0.0.0.0. That works - > > I can connect to the virtual machines using a VNC client. > > <snip> > Eeek! > > I'd change that, if I were you, to something on your own network - > 192.168.0.0/24, or whatever. I don't think you want somebody, in, say, > North Korea or Brazil getting in there. > > mark, the unpostable Hi Mark My understanding is that 0.0.0.0 in this context really means "all public network interfaces". There is no man page for qemu.conf, so all I can go by is the comments in the file. There are NAT routers in front of all of this. Bill Gee

1 0

Re: [CentOS] Design changes are done in Fedora
by James B. Byrne 30 Dec '14

30 Dec '14

On Mon, December 29, 2014 21:04, Warren Young wrote: > On Dec 29, 2014, at 4:03 PM, Les Mikesell <lesmikesell(a)gmail.com> wrote: > >> On Mon, Dec 29, 2014 at 3:03 PM, Warren Young <wyml(a)etr-usa.com> wrote: >>> >>> the world where you design, build, and deploy The System is disappearing >>> fast. >> >> Sure, if you don't care if you lose data, you can skip those steps. > > How did you jump from incremental feature roll-outs to data loss? There is no > necessary connection there. > Having written the Cucumber Backgrounder guide I believe that I am well aware of some of the current fashions in software development. The idea of incremental feature enhancement that you introduced is at once orthogonal to my original point and yet forms an ironic counterpoint that highlights the problem. The issue of data integrity is a separate matter entirely. I raised the issues of needless incompatibility and the avoidable costs of retraining and re-implementation of existing, satisfactory, solutions. You reply with a comment extolling incremental featurism. I am all in favour of incrementalism in software development. The problem being that RedHat does not do that. Instead RedHat freezes the product two years before release and then sets about creating a new, equivalent, but significantly different, replacement that you are forced to accept every seven years. In fact, the freeze, release, support and deprecate schedule that RedHat embraces as a corporate policy bears more than a passing similarity to the 'waterfall' process you, evidently prematurely, consigned to the grave. If RedHat actually adopted incremental rollout of new features to their distribution I would be most happy because, incremental rollouts are NOT SUPPOSED TO BREAK ANYTHING ALREADY IN PRODUCTION. And that condition is most certainly not met in every case of RHELx+1 I have dealt with. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

Gnome rebase in 7.2?
by Dave Johansen 30 Dec '14

30 Dec '14

https://bugzilla.redhat.com/show_bug.cgi?id=1109302 https://bugzilla.redhat.com/show_bug.cgi?id=1174442 >From those two bugzillas it looks like Gnome is going to be rebased in 7.2. I understand that that's a "RHEL thing" but does anyone here have any insight to what this will mean. Will applications have to rebuilt? Or what other implications are there? Thanks, Dave

1 0

can't enable selinux CentOS 6.5
by Tim Dunphy 30 Dec '14

30 Dec '14

Hey guys, For some reason I can't seem to enable SELinux on this one host. Here's my SELinux config file: [root@beta-new:~] #cat /etc/sysconfig/selinux # This file controls the state of SELinux on the system. # SELINUX= can take one of these three values: # enforcing - SELinux security policy is enforced. # permissive - SELinux prints warnings instead of enforcing. # disabled - No SELinux policy is loaded. SELINUX=enforcing # SELINUXTYPE= can take one of these two values: # targeted - Targeted processes are protected, # mls - Multi Level Security protection. SELINUXTYPE=targeted And when I check if it's enabled this is what I get: [root@beta-new:~] #getenforce Disabled But when I go to set SELinux to enabled, even with the config file set as you see it above, I get this result: [root@beta-new:~] #setenforce 1 setenforce: SELinux is disabled And nothing I can do enables it on this host. So how, can I solve this problem? I would definitely appreciate any advice you may have. Thanks Tim -- GPG me!! gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B

5 5

connect an iphone 5 to centos
by Patrick Bervoets 30 Dec '14

30 Dec '14

Does anyone know if you can connect an iphone 5 with ios 8.1.2 to either Centos 6 or 7? I've installed libimobiledevice but there's nothing happening. Thanks Patrick

1 0

ifcfg-br options
by Steve Clark 30 Dec '14

30 Dec '14

Hi, Does anyone know if there is an option for the ifcfg-br file that matches the brctl setageing parameter? I am using KVM and am running a DPI guest and need this parameter set to 0 to get mirrored span port data to cross the bridge to the guest vnet device. Thanks, -- Stephen Clark *NetWolves Managed Services, LLC.* Director of Technology Phone: 813-579-3200 Fax: 813-882-0209 Email: steve.clark(a)netwolves.com http://www.netwolves.com

2 2

where to get python-dbus?
by ken 30 Dec '14

30 Dec '14

When trying to use some third-party software (from HP written in python), it says "python-dbus not installed". Yet, there's $ rpm -q dbus-python dbus-python-0.70-9.el5_4 Are there really two such distinct libraries...? or is this a coding error? (Obviously I'm no python coder.) $ cat /etc/redhat-release CentOS release 5.11 (Final) tnx

1 0

Develop ineo 25e printer and CUPS
by Mihamina Rakotomandimby 30 Dec '14

30 Dec '14

Hi all, I have a Develop ineo 25e printer, and want to set it up with CUPS. I connect to http://localhost:631/ and add the printer, with uploading the PPD available here: http://www.develop.eu/en/products/office-products/colour/ineo-25/downloads.… (English, Linux, version 1.1 dated 2012) The printer is network connected, and the connection is socket://192.168.129.100 job-sheets=none, none media=iso_a4_210x297mm sides=one-sided I tried several combinations, with or without the PPD, socket:// or ipp://,... no way: The test page prints OK, but any other page is a kind of source code I could not define. Would you know what option could save me? Thanks.

1 0

Re: [CentOS] (py)curl error 7
by Mateusz Guz 29 Dec '14

29 Dec '14

Ip -6 a shows no output after "visual" inspection i don't see any ipv6 addresses assigned to my eth interfaces On Mon, 29 Dec 2014, Mateusz Guz wrote: >On Sun, 28 Dec 2014, Mark Milhollan wrote: >>On Fri, 26 Dec 2014, Mateusz Guz wrote: >>>created /etc/modprobe.d/ipv6_disable.conf file with >>>alias net-pf-10 off >>>alias ipv6 off >>>options ipv6 disable=1 >> >>These only take effect if you reboot or unload the modules manually. > >Tryning not to reboot, when unloading I get the message that the modules is in use. >I think that forcing the unload is too dangerouse, read that it might resolve in kernel panic. Forcing an unload wouldn't be wise. You must stop using the module then you can unload it. Busy usually means you have IPv6 addresses on some interfaces -- ip -6 addr flush dev ethX. /mark

1 0

Re: [CentOS] (py)curl error 7
by Mateusz Guz 29 Dec '14

29 Dec '14

>Added: >>"OPTIONS=-4 -named" to /etc/sysconfig/named, restarted named. >disabled ipv6 per interface, >>Odds are you didn't actually do this, just configured them so that they >>won't pickup a GUA. U were right :D >>created /etc/modprobe.d/ipv6_disable.conf file with >>alias net-pf-10 off >>alias ipv6 off >>options ipv6 disable=1 >These only take effect if you reboot or unload the modules manually. Tryning not to reboot, when unloading I get the message that the modules is in use. I think that forcing the unload is too dangerouse, read that it might resolve in kernel panic. -----Original Message----- From: Mark Milhollan [mailto:mlm@pixelgate.net] Sent: Sunday, December 28, 2014 8:17 PM To: Mateusz Guz Subject: Re: [CentOS] (py)curl error 7 On Fri, 26 Dec 2014, Mateusz Guz wrote: >Added: >"OPTIONS=-4 -named" to /etc/sysconfig/named, This only takes effect if you restart named. Keep in mind it does not stop named from returning IPv6 addresses. >disabled ipv6 per interface, Odds are you didn't actually do this, just configured them so that they won't pickup a GUA. >created /etc/modprobe.d/ipv6_disable.conf file with >alias net-pf-10 off >alias ipv6 off >options ipv6 disable=1 These only take effect if you reboot or unload the modules manually. >> 2a02:2498:1:3d:5054:ff:fed3:e91a: Network is unreachable" I would expect yum to try another address, until one succeeds. Sorry, I don't know why it would not do so. /mark

1 0

Re: [CentOS] CentOS 7 KVM guests no longer get keystrokes after yum update [solved]
by Charles Polisher 29 Dec '14

29 Dec '14

Fixed. I had installed a preview repository from Red Hat for some not-yet-released libguestfs features (libguestfs-RHEL-7.1-preview). There were evidently changes to some release packages in the updates repository that were incompatible with the candidate packages in the preview repository cited above. I disabled the preview repo in /etc/yum.repos.d/..., uninstalled each of its packages, and re-installed the relevant packages (libvirt qemu-kvm qemu-kvm-tools virt-* spice-gtk spice-gtk-python spice-gtk-tools spice-gtk3-vala spice-xpi). Lesson learned: When you install 3rd party repositories you should reserve time for hand-holding your package management system. -- Charles Polisher

1 0

Re: [CentOS] Fetchmail multiple instances increasing load average
by Anshul Chauhan 29 Dec '14

29 Dec '14

Kindly suggest is this right way to start the cronjob with lock if i've not mis understood. */5 * * * * /usr/bin/flock -n */etc/webmin/fetchmail/check.pl <http://check.pl> *>* --file /var/log/fetchmaillog* Warm Regards, Anshul Chauhan

1 0

Re: [CentOS] Fetchmail multiple instances increasing load average
by Anshul Chauhan 29 Dec '14

29 Dec '14

Kindly suggest is this right way to start the cronjob with lock if i've not mis undestood. */5 * * * * /usr/bin/flock -n */etc/webmin/fetchmail/check.pl <http://check.pl> *>* --file /var/log/fetchmaillog* Warm Regards, Anshul Chauhan

1 0

Re: [CentOS] OT: Bittorrent clients
by Alexandru Chiscan 29 Dec '14

29 Dec '14

>Hey, ktorrent looks pretty good! >Thanks for the hint! Maybe it's time to give KDE a second look :) LEC

3 3

OT: Bittorrent clients
by Sorin Srbu 29 Dec '14

29 Dec '14

Hi all, Just switched my home computer from Windows 7 to CentOS 6.6 and I'm having a slight bit of trouble with the bittorrent-clients. * Transmission is fine but lacks "a bit" in features. * Vuze is my preferred bt-client but gives me horrendous gfx-artifacts, like not showing the torrent name (it's white text on a white background or some such...). * Deluge is better, and what I'm using now, but I'm having trouble finding a repo that has the updated versions available for install with yum. I installed v1.3.5 a few days ago and already it's telling me that version is way outdated. Would anybody have any hints as to how and where to get the latest Deluge for CentOS? Or maybe even suggest a better torrent-client? All I'm getting from the Deluge site is some kind of source packages that is of no use for me. 8-/ Thanks in advance for any hints, tips and tricks. -- /Sorin

4 7

Re: [CentOS] OT: Bittorrent clients
by Alexandru Chiscan 28 Dec '14

28 Dec '14

>Isn't that a KDE-specific program? Yes, it's from kde. >Works with Gnome as well? All kde programs work in all desktop managers provided that you install the required libraries. The same is true for gnome programs. LEC ----- Reply message ----- From: "Sorin Srbu" <Sorin.Srbu(a)orgfarm.uu.se> To: "Centos" <centos(a)centos.org> Subject: [CentOS] OT: Bittorrent clients Date: Sun, Dec 28, 2014 13:14 Isn't that a KDE-specific program? Works with Gnome as well? //Sorin Sent from my tablet, please excuse the brevity. Alexandru Chiscan <lec(a)easterng.ro> wrote: ktorrent Lec _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

2 1

Re: [CentOS] OT: Bittorrent clients
by Alexandru Chiscan 28 Dec '14

28 Dec '14

ktorrent Lec

3 8

CentOS 7 KVM guests no longer get keystrokes after yum update
by Charles Polisher 28 Dec '14

28 Dec '14

Dear all, After "yum update" and reboot on a CentOS 7 server running kvm, all VM guests fail to receive keyboard input. Even sending ctrl-alt-delete from the virt-manager "Send Key" menu is inoperative. Most guests are set up as spice + QXL, and viewed on remote X sessions using virt-manager. Extensive browsing for a solution has turned up only dead ends. I tried reverting to the earlier kernel but there was no joy. Possibly I made some config change or installed (or removed) something that didn't take effect until I rebooted, but searching the host's command history has been unhelpful. Has anyone here run into this? Connecting to a CentOS 6 guest with virt-viewer writes some messages to the console, but what little I found in a web search was unhelpful. BTW, I hadn't messed with any guest keymaps, all stock installs with en_US. $ virt-viewer irc.foo.peecee3.com (virt-viewer:6016): GSpice-WARNING **: Warning no automount- inhibiting implementation available (virt-viewer:6016): vnc-keymap-WARNING **: Unknown keycode mapping '(null)'. Please report to gtk-vnc-list(a)gnome.org including the following information: - Operating system - GDK build - X11 Server - xprop -root - xdpyinfo Every attempted keystroke on the guest produces one of these messages: (virt-viewer:6016): GSpice-CRITICAL **: send_key: assertion `scancode != 0' failed What I think is relevant, running on the most recent kernel, all commands run from the host: $ libvirtd --version libvirtd (libvirt) 1.2.8 $ uname -a Linux mencius.peecee3.com 3.10.0-123.13.2.el7.x86_64 #1 SMP Thu Dec 18 14:09:13 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux $ cat /etc/redhat-release CentOS Linux release 7.0.1406 (Core) $ systemctl --no-pager list-unit-files 2>&1| egrep -i 'spice|agent|virt|qxl|qemu|kvm' | grep -v '\.socket' machine-qemu\x2dirc.foo.peecee3.com.scope static libvirt-guests.service disabled libvirtd.service enabled virt-who.service disabled virtlockd.service static $ localectl status System Locale: LANG=en_US.UTF-8 VC Keymap: us X11 Layout: us $ rpm -qa | egrep -i 'spice|agent|virt|qxl|qemu|kvm' | sort ipxe-roms-qemu-20130517-5.gitc4bce43.el7.noarch libgovirt-0.1.0-3.el7.x86_64 libvirt-1.2.8-9.el7.x86_64 libvirt-client-1.2.8-9.el7.x86_64 libvirt-daemon-1.2.8-9.el7.x86_64 libvirt-daemon-config-network-1.2.8-9.el7.x86_64 libvirt-daemon-config-nwfilter-1.2.8-9.el7.x86_64 libvirt-daemon-driver-interface-1.2.8-9.el7.x86_64 libvirt-daemon-driver-lxc-1.2.8-9.el7.x86_64 libvirt-daemon-driver-network-1.2.8-9.el7.x86_64 libvirt-daemon-driver-nodedev-1.2.8-9.el7.x86_64 libvirt-daemon-driver-nwfilter-1.2.8-9.el7.x86_64 libvirt-daemon-driver-qemu-1.2.8-9.el7.x86_64 libvirt-daemon-driver-secret-1.2.8-9.el7.x86_64 libvirt-daemon-driver-storage-1.2.8-9.el7.x86_64 libvirt-daemon-kvm-1.2.8-9.el7.x86_64 libvirt-glib-0.1.7-3.el7.x86_64 libvirt-python-1.2.8-5.el7.x86_64 perl-Sys-Virt-1.1.1-5.el7.x86_64 qemu-img-rhev-2.1.2-13.el7.x86_64 qemu-kvm-common-rhev-2.1.2-13.el7.x86_64 qemu-kvm-rhev-2.1.2-13.el7.x86_64 qemu-kvm-tools-rhev-2.1.2-13.el7.x86_64 spice-glib-0.20-8.el7.x86_64 spice-gtk3-0.20-8.el7.x86_64 spice-protocol-0.12.6-2.el7.noarch spice-server-0.12.4-5.el7_0.1.x86_64 virt-install-1.0.1-1.el7.centos.noarch virt-manager-1.0.1-1.el7.centos.noarch virt-manager-common-1.0.1-1.el7.centos.noarch virt-top-1.0.8-7.el7.x86_64 virt-viewer-0.5.7-7.el7.x86_64 virt-what-1.13-5.el7.x86_64 virt-who-0.8-15.el7_0.noarch Ordinarily selinux run on the host, but I temporarily disabled it to facilitate problem solving: $ getenforce Disabled The qemu logs for the guests are unremarkable, and nothing much shows up in /var/log/messages. Thanks, -- Charles Polisher

1 0

Re: [CentOS] CentOS Digest, Vol 119, Issue 26 - Email found in subject
by David Docherty 27 Dec '14

27 Dec '14

Received -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of centos-request(a)centos.org Sent: Saturday, December 27, 2014 6:00 AM To: centos(a)centos.org Subject: CentOS Digest, Vol 119, Issue 26 - Email found in subject Send CentOS mailing list submissions to centos(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos or, via email, send a message with subject or body 'help' to centos-request(a)centos.org You can reach the person managing the list at centos-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS digest..." Today's Topics: 1. Re: (py)curl error 7 (Mateusz Guz) 2. Fail2ban mail failures ??? (Robert G. (Doc) Savage) 3. Re: Fail2ban mail failures ??? (Mike Burger) 4. Re: Fail2ban mail failures ??? (Mike Burger) 5. Re: Fail2ban mail failures ??? (????????? ????????) 6. Re: Fail2ban mail failures ??? (Robert G. (Doc) Savage) 7. Re: CentOS 7 boot network problem (Greg Lindahl) 8. Re: Fail2ban mail failures ??? (????????? ????????) ---------------------------------------------------------------------- Message: 1 Date: Fri, 26 Dec 2014 14:04:08 +0000 From: Mateusz Guz <Mateusz.Guz(a)itworks.pl> To: CentOS mailing list <centos(a)centos.org> Subject: Re: [CentOS] (py)curl error 7 Message-ID: <6c9b32de4e744a0c859a3c943b4466e1(a)KAEXC.itworks.pl> Content-Type: text/plain; charset="us-ascii" Added: "OPTIONS=-4 -named" to /etc/sysconfig/named, disabled ipv6 per interface, created /etc/modprobe.d/ipv6_disable.conf file with alias net-pf-10 off alias ipv6 off options ipv6 disable=1 but still getting the same error message. Maybe it just needs a reboot (which im trying to avoid) -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Mateusz Guz Sent: Thursday, December 25, 2014 3:16 PM To: CentOS mailing list Subject: Re: [CentOS] (py)curl error 7 Tried that :D yum is still trying to connect via ipv6 (ip_resolve=4 in config file) -----Original Message----- From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On Behalf Of Alikhan Damirov Sent: Thursday, December 25, 2014 11:59 AM To: CentOS mailing list Subject: Re: [CentOS] (py)curl error 7 Hi, from man yum.conf: ip_resolve Determines how yum resolves host names. `4' or `IPv4': resolve to IPv4 addresses only. `6' or `IPv6': resolve to IPv6 addresses only. On 25 December 2014 at 11:53, Mateusz Guz <Mateusz.Guz(a)itworks.pl> wrote: > Hi, > > Disabled ipv6 (using sysctl, disabled ip6tables, no reboot, no proxy > present) and still get the message as below. > > Centos 6.3 (i know its old) > Kernel : 2.6.32-279.14.1.el6.x86_64 (I know its old) Standard > /etc/yum.conf (no changes) Standard repos (centos base), enabled > > Cleaned cache: yum metadata (didn't work) > Then: yum clean all (didn't work) > Then yum makecache (didn't work) > > Yum repolist > Could not retrieve mirrorlist > http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os error was > 14: PYCURL ERROR 7 - "Failed to connect to > 2a02:2498:1:3d:5054:ff:fed3:e91a: Network is unreachable" > > Ping on mirrorlist.centos.org is OK > Curl mirrrorlist.centos.org NOT_OK > > Message started to occur suddenly, I didn't even update any package. > Any suggestions ? > > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos > _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos ------------------------------ Message: 2 Date: Fri, 26 Dec 2014 11:39:32 -0600 From: "Robert G. (Doc) Savage" <dsavage(a)peaknet.net> To: centos(a)centos.org Subject: [CentOS] Fail2ban mail failures ??? Message-ID: <1419615572.4484.6.camel(a)lion.protogeek.org> Content-Type: text/plain; charset="UTF-8" I'm using fail2ban with CentOS 6.6. Something is causing fail2ban's alerts sent to root's mail to be rejected. Here's a clip from one of the error messages: Message 48: From MAILER-DAEMON(a)lion.protogeek.org Sun Dec 21 03:09:20 2014 Return-Path: <MAILER-DAEMON(a)lion.protogeek.org> Date: Sun, 21 Dec 2014 03:09:19 -0600 From: Mail Delivery Subsystem <MAILER-DAEMON(a)lion.protogeek.org> To: postmaster(a)lion.protogeek.org Content-Type: multipart/report; report-type=delivery-status; boundary="sBL97EKS003880.1419152959/lion.protogeek.org" Subject: Postmaster notify: see transcript for details Auto-Submitted: auto-generated (postmaster-notification) Status: R Part 1: The original message was received at Tue, 16 Dec 2014 03:09:17 -0600 from localhost with id sBG97E83025627 ----- The following addresses had permanent fatal errors ----- <fail2ban(a)example.com> ----- Transcript of session follows ----- <fail2ban(a)example.com>... Deferred: Connection timed out with example.com. Message could not be delivered for 5 days Message will be deleted from queue .......... I used to get the messages that are now being deleted after five days. Any suggestions? --Doc Savage Fairview Heights, IL ------------------------------ Message: 3 Date: Fri, 26 Dec 2014 12:59:10 -0500 From: Mike Burger <mburger(a)bubbanfriends.org> To: CentOS mailing list <centos(a)centos.org> Subject: Re: [CentOS] Fail2ban mail failures ??? Message-ID: <ea1a2849d9364fe8cbf306dd40a2a978(a)bubbanfriends.org> Content-Type: text/plain; charset=US-ASCII; format=flowed On 2014-12-26 12:39 pm, Robert G. (Doc) Savage wrote: > I'm using fail2ban with CentOS 6.6. Something is causing fail2ban's > alerts sent to root's mail to be rejected. Here's a clip from one of > the error messages: > > > Message 48: > From MAILER-DAEMON(a)lion.protogeek.org Sun Dec 21 03:09:20 2014 > Return-Path: <MAILER-DAEMON(a)lion.protogeek.org> > Date: Sun, 21 Dec 2014 03:09:19 -0600 > From: Mail Delivery Subsystem > <MAILER-DAEMON(a)lion.protogeek.org> > To: postmaster(a)lion.protogeek.org > Content-Type: multipart/report; report-type=delivery-status; > boundary="sBL97EKS003880.1419152959/lion.protogeek.org" > Subject: Postmaster notify: see transcript for details > Auto-Submitted: auto-generated (postmaster-notification) > Status: R > > Part 1: > > The original message was received at Tue, 16 Dec 2014 03:09:17 > -0600 > from localhost > with id sBG97E83025627 > > ----- The following addresses had permanent fatal errors > ----- > <fail2ban(a)example.com> > > ----- Transcript of session follows ----- > <fail2ban(a)example.com>... Deferred: Connection timed out with > example.com. > Message could not be delivered for 5 days > Message will be deleted from queue > .......... > > > > I used to get the messages that are now being deleted after five days. > Any suggestions? I would suggest looking at the mailer daemon logs on both the sending and receiving systems. It would appear that the sending system is having difficulties at the receiving system end. You will likely find the root of your issues in the log entries for that message (or those messages) that occurred over the 5 days in question. -- Mike Burger http://www.bubbanfriends.org "It's always suicide-mission this, save-the-planet that. No one ever just stops by to say 'hi' anymore." --Colonel Jack O'Neill, SG1 ------------------------------ Message: 4 Date: Fri, 26 Dec 2014 13:05:21 -0500 From: Mike Burger <mburger(a)bubbanfriends.org> To: CentOS mailing list <centos(a)centos.org> Subject: Re: [CentOS] Fail2ban mail failures ??? Message-ID: <09ef054be1244426578ae9b115c3431c(a)bubbanfriends.org> Content-Type: text/plain; charset=US-ASCII; format=flowed On 2014-12-26 12:59 pm, Mike Burger wrote: > On 2014-12-26 12:39 pm, Robert G. (Doc) Savage wrote: >> I'm using fail2ban with CentOS 6.6. Something is causing fail2ban's >> alerts sent to root's mail to be rejected. Here's a clip from one of >> the >> error messages: >> >> >> Message 48: >> From MAILER-DAEMON(a)lion.protogeek.org Sun Dec 21 03:09:20 >> 2014 >> Return-Path: <MAILER-DAEMON(a)lion.protogeek.org> >> Date: Sun, 21 Dec 2014 03:09:19 -0600 >> From: Mail Delivery Subsystem >> <MAILER-DAEMON(a)lion.protogeek.org> >> To: postmaster(a)lion.protogeek.org >> Content-Type: multipart/report; report-type=delivery-status; >> boundary="sBL97EKS003880.1419152959/lion.protogeek.org" >> Subject: Postmaster notify: see transcript for details >> Auto-Submitted: auto-generated (postmaster-notification) >> Status: R >> >> Part 1: >> >> The original message was received at Tue, 16 Dec 2014 03:09:17 >> -0600 >> from localhost >> with id sBG97E83025627 >> >> ----- The following addresses had permanent fatal errors >> ----- >> <fail2ban(a)example.com> >> >> ----- Transcript of session follows ----- >> <fail2ban(a)example.com>... Deferred: Connection timed out with >> example.com. >> Message could not be delivered for 5 days >> Message will be deleted from queue >> .......... >> >> >> >> I used to get the messages that are now being deleted after five days. >> Any suggestions? > > I would suggest looking at the mailer daemon logs on both the sending > and receiving systems. It would appear that the sending system is > having difficulties at the receiving system end. > > You will likely find the root of your issues in the log entries for > that message (or those messages) that occurred over the 5 days in > question. PS: "Connection timed out with example.com" is the first thing I'd look at. -- Mike Burger http://www.bubbanfriends.org "It's always suicide-mission this, save-the-planet that. No one ever just stops by to say 'hi' anymore." --Colonel Jack O'Neill, SG1 ------------------------------ Message: 5 Date: Fri, 26 Dec 2014 21:30:39 +0300 From: ????????? ???????? <nevis2us(a)infoline.su> To: CentOS mailing list <centos(a)centos.org> Subject: Re: [CentOS] Fail2ban mail failures ??? Message-ID: <fd36bb75c1f5fc608b87419adeef4243@localhost> Content-Type: text/plain; charset=UTF-8; format=flowed Robert G. (Doc) Savage ????? 2014-12-26 20:39: > I'm using fail2ban with CentOS 6.6. Something is causing fail2ban's > alerts sent to root's mail to be rejected. Here's a clip from one of > the > error messages: > > > Message 48: > From MAILER-DAEMON(a)lion.protogeek.org Sun Dec 21 03:09:20 2014 > Return-Path: <MAILER-DAEMON(a)lion.protogeek.org> > Date: Sun, 21 Dec 2014 03:09:19 -0600 > From: Mail Delivery Subsystem > <MAILER-DAEMON(a)lion.protogeek.org> > To: postmaster(a)lion.protogeek.org > Content-Type: multipart/report; report-type=delivery-status; > boundary="sBL97EKS003880.1419152959/lion.protogeek.org" > Subject: Postmaster notify: see transcript for details > Auto-Submitted: auto-generated (postmaster-notification) > Status: R > > Part 1: > > The original message was received at Tue, 16 Dec 2014 03:09:17 > -0600 > from localhost > with id sBG97E83025627 > > ----- The following addresses had permanent fatal errors > ----- > <fail2ban(a)example.com> > > ----- Transcript of session follows ----- > <fail2ban(a)example.com>... Deferred: Connection timed out with > example.com. > Message could not be delivered for 5 days > Message will be deleted from queue > .......... > > > > I used to get the messages that are now being deleted after five days. > Any suggestions? Check your /etc/fail2ban/jail.local /etc/fail2ban/jail.conf. You have to provide valid email addresses for dest= and sender= parameters in sendmail-whois or mail-whois actions for enabled jails. ------------------------------ Message: 6 Date: Fri, 26 Dec 2014 19:00:01 -0600 From: "Robert G. (Doc) Savage" <dsavage(a)peaknet.net> To: centos(a)centos.org Subject: Re: [CentOS] Fail2ban mail failures ??? Message-ID: <1419642001.4484.11.camel(a)lion.protogeek.org> Content-Type: text/plain; charset="UTF-8" -----Original Message----- From: ????????? ???????? <nevis2us(a)infoline.su> Reply-to: CentOS mailing list <centos(a)centos.org> To: CentOS mailing list <centos(a)centos.org> Subject: Re: [CentOS] Fail2ban mail failures ??? Date: Fri, 26 Dec 2014 21:30:39 +0300 Robert G. (Doc) Savage ????? 2014-12-26 20:39: > I'm using fail2ban with CentOS 6.6. Something is causing fail2ban's > alerts sent to root's mail to be rejected. Here's a clip from one of > the > error messages: > > > Message 48: > From MAILER-DAEMON(a)lion.protogeek.org Sun Dec 21 03:09:20 2014 > Return-Path: <MAILER-DAEMON(a)lion.protogeek.org> > Date: Sun, 21 Dec 2014 03:09:19 -0600 > From: Mail Delivery Subsystem > <MAILER-DAEMON(a)lion.protogeek.org> > To: postmaster(a)lion.protogeek.org > Content-Type: multipart/report; report-type=delivery-status; > boundary="sBL97EKS003880.1419152959/lion.protogeek.org" > Subject: Postmaster notify: see transcript for details > Auto-Submitted: auto-generated (postmaster-notification) > Status: R > > Part 1: > > The original message was received at Tue, 16 Dec 2014 03:09:17 > -0600 > from localhost > with id sBG97E83025627 > > ----- The following addresses had permanent fatal errors > ----- > <fail2ban(a)example.com> > > ----- Transcript of session follows ----- > <fail2ban(a)example.com>... Deferred: Connection timed out with > example.com. > Message could not be delivered for 5 days > Message will be deleted from queue > .......... > > > > I used to get the messages that are now being deleted after five days. > Any suggestions? Check your /etc/fail2ban/jail.local /etc/fail2ban/jail.conf. You have to provide valid email addresses for dest= and sender= parameters in sendmail-whois or mail-whois actions for enabled jails. os.org/mailman/listinfo/centos ????????? ????????, I should have made it clear that this is all on one machine. The jail.conf file is the default from the fail2ban package. It used to work perfectly, but now has the mail problem. All I've had to do for years is install the fail2ban package, start it, and make it autostart whenever I reboot. Now it's misbehaving in a way that puzzles me. --Doc Savage Fairview Heights, IL ------------------------------ Message: 7 Date: Fri, 26 Dec 2014 22:17:39 -0800 From: Greg Lindahl <lindahl(a)pbm.com> To: CentOS mailing list <centos(a)centos.org> Subject: Re: [CentOS] CentOS 7 boot network problem Message-ID: <20141227061739.GA1973(a)bx9.net> Content-Type: text/plain; charset=us-ascii >From reading http://www.freedesktop.org/wiki/Software/systemd/NetworkTarget/ it seems that this is a common problem, and that systemctl enable NetworkManager-wait-online.service might be a solution. I have a bunch of IP aliases on the same network interface, is that what's caused my problem? On Sat, Dec 20, 2014 at 01:05:01PM -0800, Greg Lindahl wrote: > I rebooted a new CentOS 7 host and it attempted to start postfix and > apache before the network came up. Needless to say both complained > that they couldn't bind to the requested IP address and "entered the > failed state." > > Did I miss an option somewhere? The network config is a manual one, > and I see from the generated file in /etc/sysconfig/network-scripts > that ONBOOT="yes"... > > -- greg > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos ------------------------------ Message: 8 Date: Sat, 27 Dec 2014 12:24:19 +0300 From: ????????? ???????? <nevis2us(a)infoline.su> To: CentOS mailing list <centos(a)centos.org> Subject: Re: [CentOS] Fail2ban mail failures ??? Message-ID: <d0ba95645f021fb68d4cff013c7d5bf3@localhost> Content-Type: text/plain; charset=UTF-8; format=flowed >> I'm using fail2ban with CentOS 6.6. Something is causing fail2ban's >> alerts sent to root's mail to be rejected. Here's a clip from one of >> the >> error messages: >> >> >> Message 48: >> From MAILER-DAEMON(a)lion.protogeek.org Sun Dec 21 03:09:20 >> 2014 >> Return-Path: <MAILER-DAEMON(a)lion.protogeek.org> >> Date: Sun, 21 Dec 2014 03:09:19 -0600 >> From: Mail Delivery Subsystem >> <MAILER-DAEMON(a)lion.protogeek.org> >> To: postmaster(a)lion.protogeek.org >> Content-Type: multipart/report; report-type=delivery-status; >> boundary="sBL97EKS003880.1419152959/lion.protogeek.org" >> Subject: Postmaster notify: see transcript for details >> Auto-Submitted: auto-generated (postmaster-notification) >> Status: R >> >> Part 1: >> >> The original message was received at Tue, 16 Dec 2014 03:09:17 >> -0600 >> from localhost >> with id sBG97E83025627 >> >> ----- The following addresses had permanent fatal errors >> ----- >> <fail2ban(a)example.com> >> >> ----- Transcript of session follows ----- >> <fail2ban(a)example.com>... Deferred: Connection timed out with >> example.com. >> Message could not be delivered for 5 days >> Message will be deleted from queue >> .......... >> >> >> >> I used to get the messages that are now being deleted after five days. >> Any suggestions? > > Check your /etc/fail2ban/jail.local /etc/fail2ban/jail.conf. > You have to provide valid email addresses for dest= and sender= > parameters in sendmail-whois or mail-whois actions for enabled jails. > os.org/mailman/listinfo/centos > > > ????????? ????????, > > I should have made it clear that this is all on one machine. The > jail.conf file is the default from the fail2ban package. It used to > work > perfectly, but now has the mail problem. All I've had to do for years > is > install the fail2ban package, start it, and make it autostart whenever > I > reboot. Now it's misbehaving in a way that puzzles me. Robert, If you never changed fail2ban defaults you probably had email aliases defined somewhere in your configurations. Whatever you had it was incorrect and it's not worth the effort to figure out why it ever worked if at all. The "right" way is to use email addresses in (at least locally) routable domains. Alexander ------------------------------ _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos End of CentOS Digest, Vol 119, Issue 26 ***************************************

1 0

Re: [CentOS] Fail2ban mail failures ???
by James B. Byrne 27 Dec '14

27 Dec '14

On Fri, December 26, 2014 12:59, Mike Burger wrote: > On 2014-12-26 12:39 pm, Robert G. (Doc) Savage wrote: >> I'm using fail2ban with CentOS 6.6. Something is causing fail2ban's >> alerts sent to root's mail to be rejected. Here's a clip from one of >> the >> error messages: >> >> >> Message 48: >> From MAILER-DAEMON(a)lion.protogeek.org Sun Dec 21 03:09:20 2014 >> Return-Path: <MAILER-DAEMON(a)lion.protogeek.org> >> Date: Sun, 21 Dec 2014 03:09:19 -0600 >> From: Mail Delivery Subsystem >> <MAILER-DAEMON(a)lion.protogeek.org> >> To: postmaster(a)lion.protogeek.org >> Content-Type: multipart/report; report-type=delivery-status; >> boundary="sBL97EKS003880.1419152959/lion.protogeek.org" >> Subject: Postmaster notify: see transcript for details >> Auto-Submitted: auto-generated (postmaster-notification) >> Status: R >> >> Part 1: >> >> The original message was received at Tue, 16 Dec 2014 03:09:17 >> -0600 >> from localhost >> with id sBG97E83025627 >> >> ----- The following addresses had permanent fatal errors >> ----- >> <fail2ban(a)example.com> >> >> ----- Transcript of session follows ----- >> <fail2ban(a)example.com>... Deferred: Connection timed out with >> example.com. >> Message could not be delivered for 5 days >> Message will be deleted from queue >> .......... >> >> >> >> I used to get the messages that are now being deleted after five days. >> Any suggestions? > > I would suggest looking at the mailer daemon logs on both the sending > and receiving systems. It would appear that the sending system is having > difficulties at the receiving system end. > > You will likely find the root of your issues in the log entries for that > message (or those messages) that occurred over the 5 days in question. > Just checking the obvious but can you confirm that you are not actually sending messages to example.com? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

PXE install in a boot on san with LVM environment, fails after reboot
by Damien Gouju 27 Dec '14

27 Dec '14

Hello, I need to automate installation of CentOS 7.0 using PXE and kickstart. My server is diskless, I'm installing CentOS on a 25GB LUN on a FC SAN with 4 paths. This LUN is the only one accessible by the server. Anaconda processes successfully the installation. But on reboot, I get stuck on a prompt after BIOS. I think I have an issue with storage configuration / bootloader configuration... I can install it using the ISO, with basic configuration. The /root/anaconda-ks.cfg looks like the following (I striped some part, I cannot copy past because I have only console access through a secured VPN :-/ ): firstboot --enable ignoredisk --only-use=mpatha,sdc,sdd,sdb,sda bootloader --location=mbr --boot-drive=mpatha autopart --type=lvm clearpart --all --initlabel --drives=mpatha %packages @base @core %end My ks.cfg template is identical (I also cannot attach it unfortunately…). I tried several things like: - put sda as boot-drive for bootloader (according to http://osdir.com/ml/general/2014-09/msg52181.html ), but anaconda fails with error that this drive cannot be found. It asks to choose another disk, mpatha is the only available. - same with dm-0 (as /dev/mapper/mpatha is a symlink to /dev/dm-0) but anaconda also fails - add to bootloader « --append="rd.lvm.lv=centos/root rd.lvm.lv=centos/swap" » I also found some post on the web saying that in the « ignoredisk » mpatha mustn't be used but disk/by-id/scsi-XXXX (chapter 23.3.2 of RHEL 7 installation guide), but I don’t know how to manage that. Is someone ever did that kind of PXE installation, with boot on san & LVM, and help me in the kickstart configuration? Any help would be highly appreciated! Best regards, Damien

1 1

Fail2ban mail failures ???
by Robert G. (Doc) Savage 27 Dec '14

27 Dec '14

I'm using fail2ban with CentOS 6.6. Something is causing fail2ban's alerts sent to root's mail to be rejected. Here's a clip from one of the error messages: Message 48: From MAILER-DAEMON(a)lion.protogeek.org Sun Dec 21 03:09:20 2014 Return-Path: <MAILER-DAEMON(a)lion.protogeek.org> Date: Sun, 21 Dec 2014 03:09:19 -0600 From: Mail Delivery Subsystem <MAILER-DAEMON(a)lion.protogeek.org> To: postmaster(a)lion.protogeek.org Content-Type: multipart/report; report-type=delivery-status; boundary="sBL97EKS003880.1419152959/lion.protogeek.org" Subject: Postmaster notify: see transcript for details Auto-Submitted: auto-generated (postmaster-notification) Status: R Part 1: The original message was received at Tue, 16 Dec 2014 03:09:17 -0600 from localhost with id sBG97E83025627 ----- The following addresses had permanent fatal errors ----- <fail2ban(a)example.com> ----- Transcript of session follows ----- <fail2ban(a)example.com>... Deferred: Connection timed out with example.com. Message could not be delivered for 5 days Message will be deleted from queue .......... I used to get the messages that are now being deleted after five days. Any suggestions? --Doc Savage Fairview Heights, IL

3 5

CentOS 7 boot network problem
by Greg Lindahl 27 Dec '14

27 Dec '14

I rebooted a new CentOS 7 host and it attempted to start postfix and apache before the network came up. Needless to say both complained that they couldn't bind to the requested IP address and "entered the failed state." Did I miss an option somewhere? The network config is a manual one, and I see from the generated file in /etc/sysconfig/network-scripts that ONBOOT="yes"... -- greg

1 1

(py)curl error 7
by Mateusz Guz 26 Dec '14

26 Dec '14

Hi, Disabled ipv6 (using sysctl, disabled ip6tables, no reboot, no proxy present) and still get the message as below. Centos 6.3 (i know its old) Kernel : 2.6.32-279.14.1.el6.x86_64 (I know its old) Standard /etc/yum.conf (no changes) Standard repos (centos base), enabled Cleaned cache: yum metadata (didn't work) Then: yum clean all (didn't work) Then yum makecache (didn't work) Yum repolist Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os error was 14: PYCURL ERROR 7 - "Failed to connect to 2a02:2498:1:3d:5054:ff:fed3:e91a: Network is unreachable" Ping on mirrorlist.centos.org is OK Curl mirrrorlist.centos.org NOT_OK Message started to occur suddenly, I didn't even update any package. Any suggestions ?

2 3

Emacs problem
by Jason Ricles 25 Dec '14

25 Dec '14

I am currently running the latest kept yum version of emacs on Centos 6.6. The issues I am having is that sometimes when I type input, some of the input randomly disappears and will then reappear when I highlight where the missing input should be. Why might this annoying thing be happening, and is there a way to fix it? Also I have not made any edits to emacs preferences so they are set to the defaults, and never happened in Centos 6.5 but now does in 6.6.

4 4

WARNING: No module xenblk found for kernel
by Dave Stevens 23 Dec '14

23 Dec '14

ran routine updates on the lernel this morning and got this: WARNING: No module xenblk found for kernel 2.6.18-400.1.1.el5, continuing anyway The only references I can find are a year or so old. Anyone able to comment? or refer me? Have not rebooted. uname -a Linux bulkley.bvserver.ca 2.6.18-400.el5xen #1 SMP Thu Dec 4 13:29:23 EST 2014 x86_64 x86_64 x86_64 GNU/Linux Thanks, Dave -- "As long as politics is the shadow cast on society by big business, the attenuation of the shadow will not change the substance." -- John Dewey

3 5

Upgrading glibc on CentOS 7 to fix memory leak
by Casey Jordan 23 Dec '14

23 Dec '14

Hi All, I am in a bit of a conundrum I hope someone could give me some advice. I have a CentOS 7 server which currently runs glibc version 2.17.x. That version contains a memory leak described and fixed here: https://sourceware.org/bugzilla/show_bug.cgi?id=17370 Suffice to say, this memory leak is causing some serious issues and I have read that upgrading glibc without also upgrading the entire kernel is not recommended. I was hoping that this fix was back ported into CentOS 7 somewhere and maybe there is a quick fix I just don't know about? This is a production server so stability is a big concern, I can't be trying out any new experimental stuff ;) Thanks everyone! <https://sourceware.org/bugzilla/show_bug.cgi?id=17370>-- -- Casey Jordan easyDITA a product of Jorsek LLC "CaseyDJordan" on LinkedIn, Twitter & Facebook (585) 348 7399 easydita.com This message is intended only for the use of the Addressee(s) and may contain information that is privileged, confidential, and/or exempt from disclosure under applicable law. If you are not the intended recipient, please be advised that any disclosure copying, distribution, or use of the information contained herein is prohibited. If you have received this communication in error, please destroy all copies of the message, whether in electronic or hard copy format, as well as attachments, and immediately contact the sender by replying to this e-mail or by phone. Thank you.

2 1

openvpn client and KDE Network Manager - with CentOS7
by CS DBA 22 Dec '14

22 Dec '14

Hi All, I am switching from Fedora20 to CentOS7 since I now run all my Linux development in a VM and I get a more robust feature set (i.e. shared folders with the host that "just work", etc) The only issue I have thus far is VPN connections. Looking at what's installed on my old Fedora install I suspect I need these packages: kde-plasma-nm-vpnc kde-plasma-nm-openvpn NetworkManager-openvpn NetworkManager-vpnc However none of these are available in CentOS7, Note I have the centos extras and the EPEL repos enabled. I suspect that I need rpmfusion but I don't see that rpmfusion has a repo for CentOS7... Anyone have any thoughts? Can I simply install the centos6 rpmfusion repo? Thanks in advance

3 4

yum upgrade not working
by Tim Dunphy 22 Dec '14

22 Dec '14

Hey all, I'm attempting to upgrade a Centos 5.9 machine to CentOS 5.10. But when I try the yum update command I get this response: --> Finished Dependency Resolution python26-PyYAML-3.08-5.el5.x86_64 from installed has depsolving problems --> Missing Dependency: libyaml-0.so.1()(64bit) is needed by package python26-PyYAML-3.08-5.el5.x86_64 (installed) --> Running transaction check ---> Package kernel.x86_64 0:2.6.18-164.15.1.el5.centos.plus set to be erased ---> Package kernel.x86_64 0:2.6.18-194.11.4.el5 set to be erased ---> Package kernel.x86_64 0:2.6.18-238.9.1.el5 set to be erased ---> Package kernel-devel.x86_64 0:2.6.18-308.4.1.el5 set to be erased --> Processing Dependency: libyaml-0.so.1()(64bit) for package: python26-PyYAML --> Finished Dependency Resolution python26-PyYAML-3.08-5.el5.x86_64 from installed has depsolving problems --> Missing Dependency: libyaml-0.so.1()(64bit) is needed by package python26-PyYAML-3.08-5.el5.x86_64 (installed) Error: Missing Dependency: libyaml-0.so.1()(64bit) is needed by package python26-PyYAML-3.08-5.el5.x86_64 (installed) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The system claims that it can't find libyaml-0.so.1, however I can easily locate it: [root@ops:~] #locate libyaml-0.so.1 /usr/lib64/libyaml-0.so.1 /usr/lib64/libyaml-0.so.1.1.0 Can someone please point me in the right direction for solving these problems? Thanks Tim -- GPG me!! gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B

3 5

Re: [CentOS] CentOS Digest, Vol 119, Issue 19
by Xinhuan Zheng 22 Dec '14

22 Dec '14

Hello Brian, >GPG is really what you want to be using for this. OpenSSL is a general >toolkit that provide a lot of good functions, but you need to cobble some >things together yourself. GPG is meant to handle all of the other parts >of >dealing with files. >I will expand on what someone else mentioned -- asymmetric encryption is >not meant for, and has very poor performance for encrypting data, and also >has a lot of limitations. The correct way to handle this is to create a >symmetric key and use that to encrypt the data, then use asymmetric >encryption to encrypt only the symmetric key. >GPG takes care of this all internally, so that's what you should be using. Do you have any resources that show examples of how to use GPG internally that takes care of symmetric/asymmetric encryption? Thanks, - xinhuan

1 0

Re: [CentOS] Yum error
by Alessandro Baggi 22 Dec '14

22 Dec '14

On 12/22/2014 02:39 PM, Mark Milhollan wrote: > On Mon, 22 Dec 2014, Alessandro Baggi wrote: > >> File "/usr/lib/python2.7/site-packages/yum/fssnapshots.py", line 156, in >> __init__ >> self._vgnames = _list_vg_names() >> File "/usr/lib/python2.7/site-packages/yum/fssnapshots.py", line 59, in >> _list_vg_names >> stdout=subprocess.PIPE, stderr=subprocess.PIPE) > > Looks like you have yum-plugin-fs-snapshot installed, which is flawed. > Further it looks like a recent update that tried to fix the original > problem introduced a new problem. You can remove it manually using "rpm > -e yum-plugin-fs-snapshot". > > > /mark > Hi Mark, I've tried:rpm -e yum-plugin-fs-snapshot error: package yum-plugin-fs-snapshot is not installed Then, yum-plugin-fs-snapshot is not installed. I've tried to install it but nothing happened. Then I've tried also to remove it with rpm -e but no good result. Other method to get debug info? Thanks in advance.

2 2

Yum error
by Alessandro Baggi 22 Dec '14

22 Dec '14

Hi there, I've installed C7 and I'm trying to use targetcli and other. Until yesterday all works good. Today I've runned yum update, that has updated glibc. Then I installed targetcli and targetd. After some operation on an md device like mount/umont. After this, during yum install lsof I get: ..... Install 1 Package Total size: 331 k Installed size: 927 k Is this ok [y/d/N]: y Downloading packages: Running transaction check Running transaction test Transaction test succeeded Running transaction Traceback (most recent call last): File "/usr/bin/yum", line 29, in <module> yummain.user_main(sys.argv[1:], exit_code=True) File "/usr/share/yum-cli/yummain.py", line 355, in user_main errcode = main(args) File "/usr/share/yum-cli/yummain.py", line 261, in main return_code = base.doTransaction() File "/usr/share/yum-cli/cli.py", line 771, in doTransaction resultobject = self.runTransaction(cb=cb) File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 1728, in runTransaction if self.fssnap.available and ((self.conf.fssnap_automatic_pre or File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 1125, in <lambda> fssnap = property(fget=lambda self: self._getFSsnap(), File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 1061, in _getFSsnap devices=devices) File "/usr/lib/python2.7/site-packages/yum/fssnapshots.py", line 156, in __init__ self._vgnames = _list_vg_names() File "/usr/lib/python2.7/site-packages/yum/fssnapshots.py", line 59, in _list_vg_names stdout=subprocess.PIPE, stderr=subprocess.PIPE) File "/usr/lib64/python2.7/subprocess.py", line 711, in __init__ errread, errwrite) File "/usr/lib64/python2.7/subprocess.py", line 1308, in _execute_child raise child_exception OSError: [Errno 2] No such file or directory (What file is for "No such file or directory"?) Running yum with debug option I can't get useful information. ls -1 /etc/yum.repos.d/ CentOS-Base.repo CentOS-Debuginfo.repo CentOS-fasttrack.repo CentOS-Sources.repo CentOS-Vault.repo I've searched on google without good results. Can point me in the right direction to solve this? Thanks in advance.

1 0

no access to certain WEB sites using CentOS 6.5
by Igor Furlan 21 Dec '14

21 Dec '14

HW: Lenovo T520 laptop with MS WIN 7 OR dedicated PC (DELL GX 280) SW: CentOS 6.5 (64-bit) installed using VMware Player on MS WIN 7 host CASE A) -- BRIDGED networking selected CASE B) -- NAT networking OR CentOS 6.5 i(32-bit) nstalled on real HW (DELL OptiPlex GX 280) ___issue____ at hand: The default Firefox ESR browser (17.0.10) does not find many web pages. regardless of the system (virtual - bridged or NAT OR real HW) For example: https://www.google.com/ works When I enter into search field string 'opera browser' https://www.google.com/search?q=opera+browser&ie=utf-8&oe=utf-8&aq=t&rls=or… I do get a lot of results back. So far so good. Then I click on the first searched link http://www.opera.com/ I get back Server not found Firefox can't find the server at www.opera.com Then I open gnome-terminal and type ping www.opera.com I get back __nothing__ [igor@localhost ~]$ ping www.opera.com PING www.route53.opera.com (54.244.236.138) 56(84) bytes of data. but when I type ping opera.com I get back [igor@localhost ~]$ ping opera.com PING opera.com (185.26.182.79) 56(84) bytes of data. 64 bytes from front-ams.opera.com (185.26.182.79): icmp_seq=1 ttl=41 time=174 ms 64 bytes from front-ams.opera.com (185.26.182.79): icmp_seq=2 ttl=41 time=122 ms ======================== another example ======================== http://www.delo.si/ works http://www.dnevnik.si does __not__ work http://www.centos.org/ works but when I click on the link Special Interest Group on the same page http://wiki.centos.org/SpecialInterestGroup , the link does NOT work. I get back Server not found Firefox can't find the server at www.opera.com. :::important::: All the examples from above work flawlessly on the MS WIN 7 on the same laptop, the same ETHERNET cable connected to the same switch hub with the same router at the same time. [Reminder: CentOS 6.5 runs on VMWare on WIN 7] Any hint, FAQ, pointer to RTFM is more than welcome I am puzzled, please help -- "You can't run an economy where the financial sector is making 40 percent of the profits." former Fed Chairman Paul Volcker 2009

4 5

Changing LANG from de_DE to en_US in CentOS 6
by Alexander Farber 21 Dec '14

21 Dec '14

Hello, on a Macbook with OSX Yosemite (which prints de_DE.UTF-8 as value of $LANG in Terminal) and VmWare Fusion 7 I have installed CentOS 6.6 minimal. When I ssh to my new VM as root, the $LANG is de_DE.UTF-8 too. I would like it to be en_US.UTF-8 instead. I have grepped /etc and /root for "de_DE", but nothing is found there. Grepping for LANG in /etc gives many results, esp. /etc/sysconfig/i18n contains: LANG="en_US.UTF-8" SYSFONT="latarcyrheb-sun16" So where does the change to de_DE happen and what is the best spot in CentOS 6 to set that to en_US.UTF-8 (I understand that I could set LANG in /root/.bash_profile but am looking for a better place to do that). Thank you Alex

2 1

Re: [CentOS] WARNING: No module xenblk found for kernel
by Peter 21 Dec '14

21 Dec '14

On 12/19/2014 03:52 PM, Dave Stevens wrote: > what you say makes sense, but leaves me with two problems - what to do > and how did this happen? You never mentioned if this is for a dom0 or domu, if it's a domu is it a pv or hvm domain and does it use pvgrub, pygrub or does it boot directly to a kernel on the dom0? Also paste the output of this command from the affected domain: rpm -q kernel kernel-xen Peter

2 2

CentOS-announce Digest, Vol 118, Issue 13
by centos-announce-request＠centos.org 20 Dec '14

20 Dec '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2014:2023 Moderate CentOS 7 glibc Security Update (Johnny Hughes) 2. CESA-2014:2024 Important CentOS 7 ntp Security Update (Johnny Hughes) 3. CESA-2014:2025 Important CentOS 5 ntp Security Update (Johnny Hughes) 4. CESA-2014:2024 Important CentOS 6 ntp Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Fri, 19 Dec 2014 12:43:11 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2014:2023 Moderate CentOS 7 glibc Security Update Message-ID: <20141219124311.GA21244(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:2023 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-2023.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 6dd25ccaf1f9d06ca9da4f515916d2afb1a2aab9527ba5340dbe14f18cf4b86c glibc-2.17-55.el7_0.3.i686.rpm e8daa909b6c2b4b6cc5565f84b8b881524c533adbfe962a4fe077d75b5977841 glibc-2.17-55.el7_0.3.x86_64.rpm 7738dd89e4b58c59dfe9e47ea04fd3ec40e583370bdda83f6f59cd5b09c4fd87 glibc-common-2.17-55.el7_0.3.x86_64.rpm 715d929c131541e17d12845e09689e2fff7cc123cd0d5b3de0bb5532862ab213 glibc-devel-2.17-55.el7_0.3.i686.rpm 9d39f3c916237fecf8407b1d39a2b5fd5e762cd94f1d65d02996ca54ebcd0454 glibc-devel-2.17-55.el7_0.3.x86_64.rpm 916f461547801dc1b762ecf755de264f0658ef5c837a3f2ef6936c3d3bf63afd glibc-headers-2.17-55.el7_0.3.x86_64.rpm 77b9a62ca495e1cc8b58df4905bf56b54ce26f4b0b1020b1ad8dacdaf30562b8 glibc-static-2.17-55.el7_0.3.i686.rpm 773fbf04671daacd4bdb5faa04f8d33ead963e3722ae3ec8748434230518f7dc glibc-static-2.17-55.el7_0.3.x86_64.rpm 126c340881e9d1e412be815e3dd5d82f2ad8afaec3a64bea08073f4695b0d94e glibc-utils-2.17-55.el7_0.3.x86_64.rpm deb39b89130b67cfedc8aaf1c523682088ae5afd169d4dd20f04790c3849e265 nscd-2.17-55.el7_0.3.x86_64.rpm Source: ef01d54770aaadf87479258e8e16bd8d9e117dd83eb9f9dccf8190379240f39a glibc-2.17-55.el7_0.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Sat, 20 Dec 2014 02:57:22 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2014:2024 Important CentOS 7 ntp Security Update Message-ID: <20141220025722.GA39409(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:2024 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-2024.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: eb1f37503849be8074e2fe9cc96c16b8f4043f9e63d5c22770a93393f0d3fd25 ntp-4.2.6p5-19.el7.centos.x86_64.rpm 3fbe5561138599a1b6c0d1f87e63d3c50852c30854ab7ee0f9f0b1f13797b87e ntpdate-4.2.6p5-19.el7.centos.x86_64.rpm 41dcf9b65721d05b684aa126b239f318233584a9f699237886536b75affc5b4a ntp-doc-4.2.6p5-19.el7.centos.noarch.rpm 7a45a9a20e6c3c1ab4d793967efe50e82ce7ef1c6f7259596766cb41eac65f8b ntp-perl-4.2.6p5-19.el7.centos.noarch.rpm 7f5f51553c687deaa9fb148f872c285a48bf99811f9e43651c62762ba0449510 sntp-4.2.6p5-19.el7.centos.x86_64.rpm Source: 96b24731ac00a500ce36c8d15d5cefc22cfb915caebe49a3d7f23ef0b487af09 ntp-4.2.6p5-19.el7.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Sat, 20 Dec 2014 03:00:03 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2014:2025 Important CentOS 5 ntp Security Update Message-ID: <20141220030003.GA29397(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:2025 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-2025.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 1f950686ddfeed8a83ab5d34fe7b0005dcf3901a60b191bbe89a76e7a299035c ntp-4.2.2p1-18.el5.centos.i386.rpm x86_64: a1fe8ccc0ae9cc1e9147039c3e02cd8697750e783b0c3b7f29522ce29800b630 ntp-4.2.2p1-18.el5.centos.x86_64.rpm Source: 40a26d1615ec22494f45e082e2a0cb351fab45b67cafd7d91c4401a0310cf15d ntp-4.2.2p1-18.el5.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Sat, 20 Dec 2014 03:01:33 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2014:2024 Important CentOS 6 ntp Security Update Message-ID: <20141220030133.GA47180(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:2024 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-2024.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a386cc5cd78c66c94db33898c131b317f459c79b060ce3ab7579b12e3a743ce3 ntp-4.2.6p5-2.el6.centos.i686.rpm 3e93b6653bf3b41012409bc769680971b291ad8535a0494826d8b73d0dc8ddaf ntpdate-4.2.6p5-2.el6.centos.i686.rpm ba3b3063ee0b6a7b88f4ca857ee903768344d8d2a255b13efb8ab0ae9b3886e3 ntp-doc-4.2.6p5-2.el6.centos.noarch.rpm a4d20f5db9d88a3c58a67774865be4a517037b0d4705014595c1c13ed61c9085 ntp-perl-4.2.6p5-2.el6.centos.i686.rpm x86_64: 000c102af0592fd232ec9272532b936d578c1a393fd300579b86f2787812657a ntp-4.2.6p5-2.el6.centos.x86_64.rpm 4a78c7a0ebd6597665a5a9167d9bbaf9b2715db79c3479e5aed2fe225a70e6fb ntpdate-4.2.6p5-2.el6.centos.x86_64.rpm ba3b3063ee0b6a7b88f4ca857ee903768344d8d2a255b13efb8ab0ae9b3886e3 ntp-doc-4.2.6p5-2.el6.centos.noarch.rpm 5c043bcfebf3e0fc5150ef4543a656fa8926f7cc3cc5ffc287ed6dbd73540b18 ntp-perl-4.2.6p5-2.el6.centos.x86_64.rpm Source: b7a1a28cd91d2c10e52128ffab56ff14c83edcc8d143e5980d14e792ac804a40 ntp-4.2.6p5-2.el6.centos.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 118, Issue 13 ************************************************

1 0

I can't see some of my onwn e-mails ...
by Bill Maltby (C4B) 20 Dec '14

20 Dec '14

I sometimes receive e-mails I post to this list, like I did the bug I reported about X problems, but other times not, like my first post about that before I reported the bug. That one appeared in gmane, but Evolution never picked it up. And today I've not seen either of my posts but I know it got there because I did see a reply to my post about the flash plugin and it had a snippet of my post init. I've looked at all the seetings I can think of and nothing struck me as suppressing my own. I use gmail and ISTR a discussion recently about some issues with that. Anyone got a clue(bat) for me? Thanks, Bill

4 13

NTP Vulnerability?
by listmail 20 Dec '14

20 Dec '14

I just saw this: https://ics-cert.us-cert.gov/advisories/ICSA-14-353-01 which includes this: " A remote attacker can send a carefully crafted packet that can overflow a stack buffer and potentially allow malicious code to be executed with the privilege level of the ntpd process. All NTP4 releases before 4.2.8 are vulnerable." "This vulnerability is resolved with NTP-stable4.2.8 on December 19, 2014." I guess no one has had time to respond yet. Wonder if I should shut down my external NTP services as a precaution? --Bill

4 4

Asymmetric encryption for very large tar file
by Xinhuan Zheng 19 Dec '14

19 Dec '14

Hello CentOS list, I have a requirement that I need to use encryption technology to encrypt very large tar file on a daily basis. The tar file is over 250G size and those are data backup. Every night the server generated a 250G data backup and it¹s tar¹ed into one tarball file. I want to encrypt this big tarball file. So far I have tried two technologies with no success. 1) generating RSA 2048 public/private key pair via ³openssl req -x509 -nodes -newkey rsa:2048 -keyout private.pem -out public.pem² command and uses the public key to encrypt the big tar file. The encryption command I used is "openssl smime -encrypt -aes256 -in backup.tar -binary -outform DEM -out backup.tar.ssl public.pem². The resulting backup.tar.ssl file is only 2G then encryption process stops there and refuse to do more. Cannot get around 2G. 2) generating GPG public/private key pair via ³gpg ‹gen-key² then encrypt with "gpg -e -u "backup" -r "backup² backup.tar². However, the gpg encryption stops at file size 50G and refuse to do more and the gpg process took over 48 hours. The server is very capable. It¹s 8 CPU Intel 2.33 GHz 16G RAM installing latest RHEL 5.11. Thought CentOS 5 is pretty much compatible in release with RHEL 5. I have searched google and found out a technique that utilizes the symmetric encryption. Then it needs to generate a symmetric key every day and uses public/private key pair to encrypt the symmetric key. However the drawback is that we don¹t know how to manage the symmetric key securely. We can¹t leave the un-encrypted symmetric key there on the server but we have to use the un-encrypted symmetric key for encryption process. Plus we¹ll need to manage the symmetric encryption key, public and private key pair 3 things securely. Has anyone had experience on managing the asymmetric encryption for very large file and what¹s the best practice for that? Thanks. - xinhuan

12 14

Re: [CentOS] How to configure xguest Firefox home page
by James B. Byrne 19 Dec '14

19 Dec '14

On Mon, December 8, 2014 21:12, David McGuffey wrote: > I've installed CentOS 6.6 on a workstation at a local non-profit as a > kiosk machine. I used xguest. Works great, except now the customer > wants the Firefox homepage to be one pointing to a particular site. > Doesn't seem to be much documentation on how to make minor changes to > the account. Lots of SELinux guidance, but nothing about default home > page, etc. > > Dave > > > > See: /usr/lib/firefox/firefox.cfg Add: lockPref("browser.startup.homepage", "http://www.example.com/path/) Google: FireFox Kiosk -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

2 1

How to configure xguest Firefox home page
by David McGuffey 19 Dec '14

19 Dec '14

I've installed CentOS 6.6 on a workstation at a local non-profit as a kiosk machine. I used xguest. Works great, except now the customer wants the Firefox homepage to be one pointing to a particular site. Doesn't seem to be much documentation on how to make minor changes to the account. Lots of SELinux guidance, but nothing about default home page, etc. Dave

4 3

Re: [CentOS] WARNING: No module xenblk found for kernel
by Peter 19 Dec '14

19 Dec '14

On 12/20/2014 07:02 AM, Dave Stevens wrote: > $ rpm -q kernel kernel-xen > kernel-2.6.18-371.11.1.el5 > kernel-2.6.18-371.12.1.el5 > kernel-2.6.18-398.el5 > kernel-2.6.18-400.el5 > kernel-2.6.18-400.1.1.el5 > kernel-xen-2.6.18-371.11.1.el5 > kernel-xen-2.6.18-371.12.1.el5 > kernel-xen-2.6.18-398.el5 > kernel-xen-2.6.18-400.el5 > kernel-xen-2.6.18-400.1.1.el5 It is as I suspected, you've been installing both kernel and kernel-sen the entire time. paste the contents of /etc/grub.conf and then I can give you a proper answer about what to do. Peter

1 0

Re: [CentOS] Asymmetric encryption for very large tar file
by Xinhuan Zheng 19 Dec '14

19 Dec '14

Hello, Thanks for all feedback I got. I am pretty sure that if I used ³openssl enc² method, it is able to handle large file over 250g size perfectly. I think openssl installed on the system is capable of doing large file support. However, when using ³openssl smime², it is not able to. Apparently it¹s smime method limitations, not the openssl. Other than smime and enc, what other methods can I use for large file support that would use the asymmetric public/private keys? - xinhuan

1 0

CentOS-announce Digest, Vol 118, Issue 12
by centos-announce-request＠centos.org 19 Dec '14

19 Dec '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2014:2008 Important CentOS 5 kernel Security Update (Johnny Hughes) 2. CEBA-2014:2015 CentOS 6 cpufrequtils FASTTRACK BugFix Update (Johnny Hughes) 3. CEBA-2014:2014 CentOS 7 golang BugFix Update (Johnny Hughes) 4. CESA-2014:2010 Important CentOS 7 kernel Security Update (Johnny Hughes) 5. CEBA-2014:2018 CentOS 6 java-1.7.0-openjdk BugFix Update (Johnny Hughes) 6. CESA-2014:2021 Important CentOS 6 jasper Security Update (Johnny Hughes) 7. CESA-2014:2021 Important CentOS 7 jasper Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 18 Dec 2014 13:03:54 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2014:2008 Important CentOS 5 kernel Security Update Message-ID: <20141218130354.GA21452(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:2008 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-2008.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 6ba562e82b41d226a94ff5bf3a1eeea2d60c47e34c5cb4a7c87f959b89e78df8 kernel-2.6.18-400.1.1.el5.i686.rpm 9c05cfd09dc56aa8e06b7bb8c596d149b2994766a02ce5881858962b15bdc84d kernel-debug-2.6.18-400.1.1.el5.i686.rpm 09cc14c2a30495bc8d8fe6d9656e1661f2cb68423f77cc016625d98cdb9ecd57 kernel-debug-devel-2.6.18-400.1.1.el5.i686.rpm c84b6b08f6a661343d899c3f047e463c558f7caa4148ae04066fccdf6ca96581 kernel-devel-2.6.18-400.1.1.el5.i686.rpm 25bdff4730524a18f666f3fccd091fd8d8de6d51e56ec1b27c23411b1b653a00 kernel-doc-2.6.18-400.1.1.el5.noarch.rpm e6ff8a06d6371c0d44aae8ec54de407cbe234316ad190d841df9f3203f655442 kernel-headers-2.6.18-400.1.1.el5.i386.rpm 23edc72733314d31fd61e0a0892073fbe4f29bae731ab5a0ed58a359ad45fc28 kernel-PAE-2.6.18-400.1.1.el5.i686.rpm f4c9e8de45147a96051357edf89b98b3ba942b5d7d08cf4a834b833cdd6aa214 kernel-PAE-devel-2.6.18-400.1.1.el5.i686.rpm 923028c0a3f24ed84758f1aea10fb2f1d3f1fc686baf463da3d48133317b6479 kernel-xen-2.6.18-400.1.1.el5.i686.rpm cacf645ea5c0be63abf933721ba877f8c9ed1b496710e65070f2129f53520257 kernel-xen-devel-2.6.18-400.1.1.el5.i686.rpm x86_64: 2f6f7228f60089bafb29dd49d0fd07b5669925f5df09721b82b7b32d2a6db27f kernel-2.6.18-400.1.1.el5.x86_64.rpm b9f2265e4a3fc43f47c2e0f005ad9b93c0201774afa6d903cbb303a4158f6d37 kernel-debug-2.6.18-400.1.1.el5.x86_64.rpm 5b53d6eb09bb9b5a4d12c8be501804479a65400fbe7eb4d8eb3bab2ca3ddb45b kernel-debug-devel-2.6.18-400.1.1.el5.x86_64.rpm 944442f571237b00f39557a950b91dc16bf84873c137d7dbcdb16d984f22b470 kernel-devel-2.6.18-400.1.1.el5.x86_64.rpm 25bdff4730524a18f666f3fccd091fd8d8de6d51e56ec1b27c23411b1b653a00 kernel-doc-2.6.18-400.1.1.el5.noarch.rpm ce820b2df729875eacfedd36213e78089d35b499e87de95039a3a88f97d80b3f kernel-headers-2.6.18-400.1.1.el5.x86_64.rpm 8d1ae83a187d2ab25acd247a40eba378515579ba7026e61091c473a83acb5f07 kernel-xen-2.6.18-400.1.1.el5.x86_64.rpm 5fc23d80833f8575776d0d949d1c09d671a951c288b4b48f4c401fddfc00a225 kernel-xen-devel-2.6.18-400.1.1.el5.x86_64.rpm Source: 180a7d0379b99dd938203ef79ba3c2f3b345eee70b9fdb6d5ad6dc49bedc7a3c kernel-2.6.18-400.1.1.el5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Thu, 18 Dec 2014 13:53:36 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2014:2015 CentOS 6 cpufrequtils FASTTRACK BugFix Update Message-ID: <20141218135336.GA18184(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:2015 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-2015.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: f34f074b540b76b0d1ac971866a940eb61d0538aa47d2d85b2776b3bb0ce1d7f cpufrequtils-007-8.el6.i686.rpm 79914ff6eb2a9e45ba38c2c0a32d05ee70f2f7f62bc90e5d079df8b27b9749b1 cpufrequtils-devel-007-8.el6.i686.rpm x86_64: f34f074b540b76b0d1ac971866a940eb61d0538aa47d2d85b2776b3bb0ce1d7f cpufrequtils-007-8.el6.i686.rpm 8238fb5f828e2d3dfe2d9f808c86ac62f55215d2f1ad550b54282dbdd5f35876 cpufrequtils-007-8.el6.x86_64.rpm 79914ff6eb2a9e45ba38c2c0a32d05ee70f2f7f62bc90e5d079df8b27b9749b1 cpufrequtils-devel-007-8.el6.i686.rpm 16b3bc4424b0b9eab962cfa1973ac4331541b721323552828f9762a0cb8bb3fd cpufrequtils-devel-007-8.el6.x86_64.rpm Source: 6e47d79cb2e660ac1573d52458a87dae30a5c058b666e7cf4e9b086f5193324e cpufrequtils-007-8.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Thu, 18 Dec 2014 16:32:45 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2014:2014 CentOS 7 golang BugFix Update Message-ID: <20141218163245.GA30708(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:2014 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-2014.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: e0898c70683955da8ce95d4ffcc7e5b7d09a531696ec7298a481be04fd771b18 emacs-golang-1.3.3-2.el7_0.noarch.rpm 0bd584b2c18bc9828b6b7761a2d5d84cce7a345455315c0771e1d108725ae88b golang-1.3.3-2.el7_0.x86_64.rpm 1f3b2fb1f040e00dc8b503b6d10f0fcf6ca7ba94435073a1c20bd6b6d5fdbacd golang-pkg-bin-linux-amd64-1.3.3-2.el7_0.x86_64.rpm 12853cf4d4b89e87b1e65167085a3baebb7de72ebcb1a5b7ad2a49d281765905 golang-src-1.3.3-2.el7_0.noarch.rpm f311196a43bab2c82c076a1d7621a42ead3295e0f84f4c1952b2ca2cf037a6a3 golang-vim-1.3.3-2.el7_0.noarch.rpm Source: 1c29026f24d00237c55552f2389a10d6c594df97320339bc70c407268fc46a8b golang-1.3.3-2.el7_0.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Thu, 18 Dec 2014 17:17:29 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2014:2010 Important CentOS 7 kernel Security Update Message-ID: <20141218171729.GA37051(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:2010 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-2010.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 3102507dee24e401d272de9ed41c7e6a55f5e85415e8f66102d14d63a681b452 kernel-3.10.0-123.13.2.el7.x86_64.rpm 63f436a8fbce22e637cf1644903b2d30c33282a93e0fb77ac5429e023c249459 kernel-abi-whitelists-3.10.0-123.13.2.el7.noarch.rpm 0c6131a5a84cc1cfabbe4b18e5aef2a57c238f1a63771063a349c71c40dd69a2 kernel-debug-3.10.0-123.13.2.el7.x86_64.rpm 5398fc67cb35d656b66585963692c85e1740b07fd97108b4a0baa6b549bd2396 kernel-debug-devel-3.10.0-123.13.2.el7.x86_64.rpm 874079bdcb77fdb8404f081b63cb54d99684832b7e8178c85e6c6f9cc9960d20 kernel-devel-3.10.0-123.13.2.el7.x86_64.rpm 9ace57e19b34391152dae26d952f986326c56224a52b6ba84812b5ade2a12d03 kernel-doc-3.10.0-123.13.2.el7.noarch.rpm a5a27478047e3c47207380735a798e28bd56e20d57c9f8030038ac35379b0d78 kernel-headers-3.10.0-123.13.2.el7.x86_64.rpm d502ed624a7b5aeef659e520127fd775d6e7eb50bbf9df5cfe9c80249078babe kernel-tools-3.10.0-123.13.2.el7.x86_64.rpm 8c18446d82db2466d496467bf619b0ecf8cdceec554313bda0f2fe85e3f5bce7 kernel-tools-libs-3.10.0-123.13.2.el7.x86_64.rpm 539367e5789ad36b630bb04bc167b4f6e3b49b692b8063f673ee013a1c04cbc0 kernel-tools-libs-devel-3.10.0-123.13.2.el7.x86_64.rpm ccdebb87d77a48370c96fa7554957d1770412f3a9086183ece8aa16a1b9754b8 perf-3.10.0-123.13.2.el7.x86_64.rpm aa63a3c6d99fddc52c319644ef0ed349ba7537250b49cebb9381a5b15460b68e python-perf-3.10.0-123.13.2.el7.x86_64.rpm Source: 5cf16c495afa0864a8146a2051efa43cc13b7cd92e4f2a92f97b6a168fa59229 kernel-3.10.0-123.13.2.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Thu, 18 Dec 2014 22:11:27 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2014:2018 CentOS 6 java-1.7.0-openjdk BugFix Update Message-ID: <20141218221127.GA46728(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:2018 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-2018.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e95898200130ad5d70ab511133a22dafc65b584cc3a24e65aefb573fd16ffb18 java-1.7.0-openjdk-1.7.0.71-2.5.3.2.el6_6.i686.rpm ff17a9a9538b596c3f37a553e73a61d2471f1d172d09f04d710a2e6a705d5839 java-1.7.0-openjdk-demo-1.7.0.71-2.5.3.2.el6_6.i686.rpm c30e155dcccd2b87897b949f1019834c041135359858694c497e6d3002d4d7cc java-1.7.0-openjdk-devel-1.7.0.71-2.5.3.2.el6_6.i686.rpm 29d9a219c59cbebc9316a8a76d5120a4f2130e32e8360a455c01bad1b80c8c2d java-1.7.0-openjdk-javadoc-1.7.0.71-2.5.3.2.el6_6.noarch.rpm 6661c70b3fb8fadb7fce4b9e2ae733565a2b8d59cb0fa62bdf0cbd10bfd76f56 java-1.7.0-openjdk-src-1.7.0.71-2.5.3.2.el6_6.i686.rpm x86_64: 9728a3157a25c34553d6b8e787d28334bc3a7d1f731204f443c0b538c6e770ab java-1.7.0-openjdk-1.7.0.71-2.5.3.2.el6_6.x86_64.rpm 3918c2bce0940b971f1b9833c3e96620bbf7cc918ed35ff3dd13743bfe6119d3 java-1.7.0-openjdk-demo-1.7.0.71-2.5.3.2.el6_6.x86_64.rpm 881d8950c96ba14cfe3847eca9ab024351faa559c5590f031ddd4b0219a4c369 java-1.7.0-openjdk-devel-1.7.0.71-2.5.3.2.el6_6.x86_64.rpm 29d9a219c59cbebc9316a8a76d5120a4f2130e32e8360a455c01bad1b80c8c2d java-1.7.0-openjdk-javadoc-1.7.0.71-2.5.3.2.el6_6.noarch.rpm e7215345d544e2f78f511596099d50a0252b32520113f2e3e5b53c4de223f63c java-1.7.0-openjdk-src-1.7.0.71-2.5.3.2.el6_6.x86_64.rpm Source: 4c17ea187ad974a738b4006fced16d2cd25cd221fb95d4a01ac97a969d369d41 java-1.7.0-openjdk-1.7.0.71-2.5.3.2.el6_6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Thu, 18 Dec 2014 22:11:55 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2014:2021 Important CentOS 6 jasper Security Update Message-ID: <20141218221155.GA46995(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:2021 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-2021.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 04d4070c104df7ffbad82cea6877551a3ccb5833d1be8bb891970af50c75edea jasper-1.900.1-16.el6_6.2.i686.rpm 1730bd745df6e5a3f32d8c1ef62edda9e7e3e17e24a10467315f88ad0a9efcd6 jasper-devel-1.900.1-16.el6_6.2.i686.rpm cb599c957af40969fdf7f8f2d9c17976f56232bf9816c9ee9d3082ae1cc46485 jasper-libs-1.900.1-16.el6_6.2.i686.rpm f35db6119ba75befb7464b133537073c785949de047af5f83e828190517f40bb jasper-utils-1.900.1-16.el6_6.2.i686.rpm x86_64: 043f1b7a8a5ade68b0416a91885d1f76bc5183cefdb99d2d6d02d5724c8e1af5 jasper-1.900.1-16.el6_6.2.x86_64.rpm 1730bd745df6e5a3f32d8c1ef62edda9e7e3e17e24a10467315f88ad0a9efcd6 jasper-devel-1.900.1-16.el6_6.2.i686.rpm 5fee6133a02e834451bb617a66602a35efde6c51d40c940fefe82187af9df2c3 jasper-devel-1.900.1-16.el6_6.2.x86_64.rpm cb599c957af40969fdf7f8f2d9c17976f56232bf9816c9ee9d3082ae1cc46485 jasper-libs-1.900.1-16.el6_6.2.i686.rpm 6dcf0a563ff5ec86e07e710bed4f97ccda0f0c65ede7598688beb9bfec496132 jasper-libs-1.900.1-16.el6_6.2.x86_64.rpm bdaa8b107f8587e588b983763d28fbcf6b3394fb9d5242f23a1eb7e8e7ae4f46 jasper-utils-1.900.1-16.el6_6.2.x86_64.rpm Source: baf835a26ca612f33cfb42983ff03adb455bd99201544fc0fb8001452294eb64 jasper-1.900.1-16.el6_6.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 7 Date: Thu, 18 Dec 2014 22:38:19 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2014:2021 Important CentOS 7 jasper Security Update Message-ID: <20141218223819.GA2432(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:2021 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-2021.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 4aa69b59b645f86761df61064f9f1506fd9d8aefa9ef9742e2712ef414999c9b jasper-1.900.1-26.el7_0.2.x86_64.rpm 29dfc6896f8f640b84c7b22f2eeba6a48ff83fd07a3598f2bde3b2bdf90346e0 jasper-devel-1.900.1-26.el7_0.2.i686.rpm 634e4cd8b04d766ee989914eac2e322554d712018010db4fc4ec8f8446ea49b6 jasper-devel-1.900.1-26.el7_0.2.x86_64.rpm 199cc985c83ff5a93a1a310238b9343a5dbfc44de19ab102eb1650c45843c984 jasper-libs-1.900.1-26.el7_0.2.i686.rpm 548711a372716566f46f4d78a8fa2b8a8e0bc8ce0aaed3c297d467a94c65798c jasper-libs-1.900.1-26.el7_0.2.x86_64.rpm a054d436986562ffa83b16e5e44da352fd9402e407e30663d3a45184b819de77 jasper-utils-1.900.1-26.el7_0.2.x86_64.rpm Source: b56bfebabadaffd095fc340e97bf2b81bb54ca7feb3a1339e3c19057f0cd7534 jasper-1.900.1-26.el7_0.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 118, Issue 12 ************************************************

1 0

One-time reboot into alternate kernel?
by tony＠softins.co.uk 18 Dec '14

18 Dec '14

Apologies if this should be well-known, but I couldn't find anything! Situation: a system in a remote location, with no KVM, IPMI or iLO, and therefore no console access, only ssh. Multiple kernels listed in grub.conf. Is there a way to reboot temporarily into one of the other kernels listed in grub.conf, without changing the default= line, so that a subsequent reboot will default back to the original kernel? The problem I have is that having changed the default= line to select a kernel that doesn't boot properly, I need to have someone visit the console in order manually to select the working kernel again. I would like to avoid that situation if possible. Thanks, Tony -- Tony Mountifield Work: tony(a)softins.co.uk - http://www.softins.co.uk Play: tony(a)mountifield.org - http://tony.mountifield.org

2 1

Re: [CentOS] CentOS 6 - httpd 2.2.29
by James B. Byrne 18 Dec '14

18 Dec '14

On Thu, December 18, 2014 00:31, Jake Shipton wrote: > > Hi Alex, > > In this situation 2.2.29 actually does offer an advantage over CentOS > version 2.2.15. > > The version provided by CentOS does not support Forward Secrecy for SSL > or TLS 1.2. > > Version 2.2.24+ of upstream Apache includes patches which enable both > Forward Secrecy and TLS 1.2. > > Now that C6's OpenSSL can also support both TLS 1.2, and Forward > Secrecy, upgrading Apache slightly to be able to use both of those is a > very viable option. > > Although, in my case I cheat, I compile my own 2.2.29 RPM and then apply > any missing patches and new security patches from RHEL sources myself to > get the best of both worlds. > CentOS-6.6 <--- rpm -qi httpd Name : httpd Relocations: (not relocatable) Version : 2.2.15 Vendor: CentOS Release : 39.el6.centos Build Date: Thu 16 Oct 2014 10:49:26 EDT Install Date: Tue 21 Oct 2014 03:14:55 EDT Build Host: c6b9.bsys.dev.centos.org Group : System Environment/Daemons Source RPM: httpd-2.2.15-39.el6.centos.src.rpm Size : 3085394 License: ASL 2.0 Signature : RSA/SHA1, Fri 17 Oct 2014 04:02:19 EDT, Key ID 0946fca2c105b9de Packager : CentOS BuildSystem <http://bugs.centos.org> URL : http://httpd.apache.org/ Summary : Apache HTTP Server Description : The Apache HTTP Server is a powerful, efficient, and extensible web server. ---> This server supports both TLS-1.2 and PFS. The httpd configuration file for the server host above includes this line: SSLProtocol -all +TLSv1.1 +TLSv1.2 +TLSv1 And this produces no errors. I am writing this message over an https link to the aforementioned server running Squirrelmail. The Calomel Firefox plugin reports TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 as the cipher suite in use and that PFS is enabled on this link. I also have configured security.tls.version.min to 3 in Firefox's about:config to check and the link is not affected. This indicates that tls-1.2 is in fact supported. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

CentOS-announce Digest, Vol 118, Issue 11
by centos-announce-request＠centos.org 18 Dec '14

18 Dec '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2014:1997 Important CentOS 6 kernel Security Update (Johnny Hughes) 2. CEBA-2014:2004 CentOS 6 rsyslog BugFix Update (Johnny Hughes) 3. CEBA-2014:2002 CentOS 6 stunnel BugFix Update (Johnny Hughes) 4. CEBA-2014:2001 CentOS 6 openjpeg FASTTRACK BugFix Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 17 Dec 2014 12:13:22 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2014:1997 Important CentOS 6 kernel Security Update Message-ID: <20141217121322.GA47736(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:1997 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-1997.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a9c3a1a1f00cfe2f8dec2aa9d8955c3fc88175d63fd7e546d8fd31022a5e3fd5 kernel-2.6.32-504.3.3.el6.i686.rpm 7505fcd1f225f075c69d8e298bc1ef7e7e1a7c4133692ea2a360761cdc4552a0 kernel-abi-whitelists-2.6.32-504.3.3.el6.noarch.rpm 2da4c4dcc91e2aede356279458564d29161c0a42d870cf639aff2b8ce6a6fb82 kernel-debug-2.6.32-504.3.3.el6.i686.rpm 25c35628d6915f8eeb38453449d7dcceb18fb903bb353301da7d81a571b13fbd kernel-debug-devel-2.6.32-504.3.3.el6.i686.rpm 15b731d59bbc6f48f11443979eda4753b7ffccbb5f461287dd6858457d783c00 kernel-devel-2.6.32-504.3.3.el6.i686.rpm e95e10ce7f23bac3c9e14a0df2518e56b87a40b87bb23d521f3f824b5201695a kernel-doc-2.6.32-504.3.3.el6.noarch.rpm 98ffea48c454380812ec91b4a5a7c6bf5c7f6b0bdb5b11859f9255dd7831a5ab kernel-firmware-2.6.32-504.3.3.el6.noarch.rpm a1b715401fb7669f8d5cdddc7318ae6c86561ad13c27987aa2054c4213d6cbc5 kernel-headers-2.6.32-504.3.3.el6.i686.rpm ef4e90ed08f81abb52225b0be637297feffa263a5d406b1f8ef246ecff4cdf37 perf-2.6.32-504.3.3.el6.i686.rpm 0b6820042c174f63e74c549075656dbf3ff8fd94a7473cb6e8c030db86ead1ff python-perf-2.6.32-504.3.3.el6.i686.rpm x86_64: d401fbae56420ac87bab4be1eef55f1e0cdc59c4e6ac086e7c389af9ee95507c kernel-2.6.32-504.3.3.el6.x86_64.rpm 7505fcd1f225f075c69d8e298bc1ef7e7e1a7c4133692ea2a360761cdc4552a0 kernel-abi-whitelists-2.6.32-504.3.3.el6.noarch.rpm 3617b229c27488a475760cba8948e6f6d6f37c68a87cfcc2aad1323504989f21 kernel-debug-2.6.32-504.3.3.el6.x86_64.rpm 2daedae3ddffe8ba907191a3097f1b204ba10d0bb41e87eada8d69cc76be341b kernel-debug-devel-2.6.32-504.3.3.el6.x86_64.rpm 83546df48340c60758a3f6747c0e7ce8854da00804feda480b748a28c257b739 kernel-devel-2.6.32-504.3.3.el6.x86_64.rpm e95e10ce7f23bac3c9e14a0df2518e56b87a40b87bb23d521f3f824b5201695a kernel-doc-2.6.32-504.3.3.el6.noarch.rpm 98ffea48c454380812ec91b4a5a7c6bf5c7f6b0bdb5b11859f9255dd7831a5ab kernel-firmware-2.6.32-504.3.3.el6.noarch.rpm f85806c0fa62c0592d06b1599b05c3eacf03b0bc18b39e8a42239c478cfe836b kernel-headers-2.6.32-504.3.3.el6.x86_64.rpm 14c596cdd5075970ed25e1b3c8f583ad9cdf1d0cb9cfa2583f702cec3fe8f93f perf-2.6.32-504.3.3.el6.x86_64.rpm 4cd783cd4f6c0cbd2e87bbb33b7c19d5721cd4b6cb160f69a807194d35fa1e36 python-perf-2.6.32-504.3.3.el6.x86_64.rpm Source: 2de29e651647a79e10adeb2c1ad8c454330743bd51c6fb0553f0520add652c05 kernel-2.6.32-504.3.3.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 17 Dec 2014 12:14:23 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2014:2004 CentOS 6 rsyslog BugFix Update Message-ID: <20141217121423.GA47978(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:2004 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-2004.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 1f6ae8d081bd71062e5523c3185f7374ec4eb6d449e92bd47ac27ba3106b0897 rsyslog-5.8.10-10.el6_6.i686.rpm d707711459393c9cc4bf01998c56071a8d055b434ef27d208a909b90af193ff9 rsyslog-gnutls-5.8.10-10.el6_6.i686.rpm 5226d711e12b46f900d6b4a176c813f67f9c5af83d60809be1447cc3a7bbd103 rsyslog-gssapi-5.8.10-10.el6_6.i686.rpm ec26dd821c85e7ccebca43ed076465acba04eaf0d188805501cf74c4f4490ecb rsyslog-mysql-5.8.10-10.el6_6.i686.rpm 2fd08deec9dc733a17fdf178461a64e39c35f8184e94bf9584f37df1288cd343 rsyslog-pgsql-5.8.10-10.el6_6.i686.rpm ebe02441764c18aa15cae5ab5f7d1b74830bafddb5c137c8d6cf5d6c94f127f7 rsyslog-relp-5.8.10-10.el6_6.i686.rpm de7c826d4de2e5ea27b3e799586917737787649428f3dfae4f1c97c8df8e0da3 rsyslog-snmp-5.8.10-10.el6_6.i686.rpm x86_64: f6846a0085d03622b095e845ddae483def3365714ee245fad5a8141961e0873a rsyslog-5.8.10-10.el6_6.x86_64.rpm cf62c42f88d6c4c5aede900b1fdead6367f82d2e7277579cdd4aebbcc9ea6d07 rsyslog-gnutls-5.8.10-10.el6_6.x86_64.rpm 1c51213259d091b04f489806c6451b29a73a017fa9fbd7c99c2c096b76c70c1a rsyslog-gssapi-5.8.10-10.el6_6.x86_64.rpm d30a2928d0b732f6e122dd665c432f7fabe054da4a06bb941559ae80bb3ec9d2 rsyslog-mysql-5.8.10-10.el6_6.x86_64.rpm 25303f9e542bcb08b56eec2668dac510cd837591e5264c79b7ca5522367603a5 rsyslog-pgsql-5.8.10-10.el6_6.x86_64.rpm 45d2e2974591f84fa37183e87c7e205927b9074f5814dd97c9933a6154bf5f5e rsyslog-relp-5.8.10-10.el6_6.x86_64.rpm db7739e9754d3ca43fbb979348a9e21e4b4953228064328dda2634e6fd2d27fc rsyslog-snmp-5.8.10-10.el6_6.x86_64.rpm Source: 225f91f24a11bf29019e80952508985626de9bb581dda4f838e7c21936c87374 rsyslog-5.8.10-10.el6_6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Wed, 17 Dec 2014 12:15:01 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2014:2002 CentOS 6 stunnel BugFix Update Message-ID: <20141217121501.GA48168(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:2002 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-2002.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 8add9a55173beac8223b31ba94af28f5dd1a0db5ba5fdc30549b92502661306c stunnel-4.29-3.el6_6.1.i686.rpm x86_64: 919386ec4e04c5b3482c144304159df960176e4dd1beb51c8a83d8413ad58578 stunnel-4.29-3.el6_6.1.x86_64.rpm Source: a3ede9d528487365e8823d69a348755d56ca034faea125069bd2c4bec3ed900f stunnel-4.29-3.el6_6.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Wed, 17 Dec 2014 12:15:38 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2014:2001 CentOS 6 openjpeg FASTTRACK BugFix Update Message-ID: <20141217121538.GA48426(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:2001 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-2001.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a889ae4887a16de41779d261e7e6dc6233c5099bd113d2329a73c9225cc075af openjpeg-1.3-11.el6.i686.rpm 67c92553982ee9a436a44d4712f1533482eb8641eb510a4fd1229ede737594ae openjpeg-devel-1.3-11.el6.i686.rpm e5ecb082b2ac0619d49e70431edf1ffe6783a1be8930aad63acdaba902ec4f21 openjpeg-libs-1.3-11.el6.i686.rpm x86_64: 6faac8f70edd0e6d9cd394cf83d3c409faa2982333f5f5b7e898b8edca5020a5 openjpeg-1.3-11.el6.x86_64.rpm 67c92553982ee9a436a44d4712f1533482eb8641eb510a4fd1229ede737594ae openjpeg-devel-1.3-11.el6.i686.rpm 0cedfcd71c8205020fa02b04898df01eed9cc3384d9775347386f16248acafe9 openjpeg-devel-1.3-11.el6.x86_64.rpm e5ecb082b2ac0619d49e70431edf1ffe6783a1be8930aad63acdaba902ec4f21 openjpeg-libs-1.3-11.el6.i686.rpm 1ef1f1bdc64549c5241c4687cea701020d1bee5011ad3654c548a841a5fbb8ae openjpeg-libs-1.3-11.el6.x86_64.rpm Source: c4ddc1d738626bda621720e090181a3677526d39d6c839fa61cbe8f55fd2a964 openjpeg-1.3-11.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 118, Issue 11 ************************************************

1 0

rsync output under CentOS 6
by Niamh Holding 18 Dec '14

18 Dec '14

Hello, Many years ago, FC4 days, the following command run as a cron job would result in a nice summary email as follows /usr/bin/rsync -a --no-whole-file --delete /music /thecus-music/ ---------------------------------------------- building file list ... done sent 351583 bytes received 20 bytes 11527.97 bytes/sec total size is 62922572805 speedup is 178959.15 ---------------------------------------------- or ---------------------------------------------- building file list ... done Cat Stevens/The Very Best Of/23 - Peace Train.mp3 Cat Stevens/The Very Best Of/24 - If You Want To Sing Out, Sing Out.mp3 sent 378288 bytes received 27700 bytes 11436.28 bytes/sec total size is 62264729571 speedup is 153365.94 ---------------------------------------------- The same command under CentOS6 is silent, how do I get the nice summary email abain? -- Best regards, Niamh mailto:niamh@fullbore.co.uk

6 20

CentOS 6 - httpd 2.2.29
by For＠ll 18 Dec '14

18 Dec '14

Hi I had a two repo for cento6 where I can download httpd 2.2.29, (baseurl=http://centos.alt.ru/repository/centos/6/$basearch/) and baseurl=http://mirror.fserver.ru/centos-repo/6/$basearch For now this repo is not active, any other repo have 2.2.29 rpm which I can add to my repo....

6 6

bug report and resolved patch for remove_hrtimer in CentOS 6.x
by Jia He 17 Dec '14

17 Dec '14

Hi, I happened to meet with a similar issue like https://bugs.centos.org/view.php?id=7051 I found the root cause might be fixed by commit f13d4f979c518119bba5439dd2364d76d31dcd3f. The commit in branch linux-2.6.32-y is 0bd9ac380a44611e953b1657d7f54075b2f77fb0 This issue is existed in centOS 6.6 also any ideas B.R. Justin

2 1

Dropbox on CentOS 6?
by Niki Kovacs 17 Dec '14

17 Dec '14

Hi, I just spent a couple of unnerving hours trying to make Dropbox work on CentOS 6.6. Is there a way that 1. Actually works? 2. Doesn't include jumping through burning loops? Cheers from the sunny south of France, Niki -- Microlinux - Solutions informatiques 100% Linux et logiciels libres 7, place de l'église - 30730 Montpezat Web : http://www.microlinux.fr Mail : info(a)microlinux.fr Tél. : 04 66 63 10 32

6 14

selinux-policy update resets /etc/selinux/targeted/contexts/files/file_contexts?
by Patrick Bervoets 17 Dec '14

17 Dec '14

Hi, On an internal webserver (latest C6) I want smb-access to /var/www/html/ In april I did chcon -R -t public_content_rw_t /var/www/html/ setsebool -P allow_smbd_anon_write 1 setsebool -P allow_httpd_anon_write 1 echo "/var/www/html/ -- unconfined_u:object_r:public_content_rw_t:s0" >> /etc/selinux/targeted/contexts/files/file_contexts After the latest round of updates (including selinux-policy.noarch 0:3.7.19-260.el6_6.1 and selinux-policy-targeted.noarch 0:3.7.19-260.el6_6.1) samba-access to /var/www/html was denied. Applying the commands above re-enabled samba-access. Anyone knows how I can configure selinux to remeber this after an update to the policies? Thanks Patrick

3 4

How serious are we about not wanting to see...
by Clayton Kirkwood 17 Dec '14

17 Dec '14

Redhat in centos? I type help and the first line says redhat. Are we paranoid about red..t? Clayton You can tell the caliber of a man by his gun--c. kirkwood

4 5

Re: [CentOS] selinux-policy update resets /etc/selinux/targeted/contexts/files/file_contexts?
by James B. Byrne 17 Dec '14

17 Dec '14

On Wed, December 17, 2014 05:07, Patrick Bervoets wrote: > Hi, > > On an internal webserver (latest C6) I want smb-access to /var/www/html/ > In april I did > chcon -R -t public_content_rw_t /var/www/html/ > setsebool -P allow_smbd_anon_write 1 > setsebool -P allow_httpd_anon_write 1 > echo "/var/www/html/ -- unconfined_u:object_r:public_content_rw_t:s0" >> > /etc/selinux/targeted/contexts/files/file_contexts > > After the latest round of updates (including selinux-policy.noarch > 0:3.7.19-260.el6_6.1 and selinux-policy-targeted.noarch 0:3.7.19-260.el6_6.1) > samba-access to /var/www/html was denied. > Applying the commands above re-enabled samba-access. > > Anyone knows how I can configure selinux to remeber this after an update to > the policies? > > Thanks > Patrick > yum install policycoreutils-python man audit2why man audit2allow man semodule If you have setroubleshoot installed then the avc message in /var/log/messages should tell you to run sealert with the requisite parameters. Then follow the instructions. You will likely find it advisable to post your proposed custom se policy changes here first and get feedback about anything that is too broadly permissive. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

NVIDIA dropping support for older hardware (G8xxx, G9xxx and GT2xx chipsets)
by Ned Slider 17 Dec '14

17 Dec '14

Hi all, I just wanted to give a heads up to any NVIDIA users that NVIDIA are dropping support for older hardware based on G8xxx, G9xxx and GT2xx chipsets in their latest display drivers. The last version to support these older chipsets will be the current Long Lived 340.xx branch. If anyone is using NVIDIA driver packages from elrepo, legacy 340.xx driver packages are now available for those affected. There is a thread on the elrepo mailing list here: http://lists.elrepo.org/pipermail/elrepo/2014-September/002362.html http://lists.elrepo.org/pipermail/elrepo/2014-December/002447.html There is also an updated version of nvidia-detect (v343.36) available which will tell users if they are affected and need to switch to the new 340.xx legacy driver packages or whether their hardware will continue to be supported by future NVIDIA driver releases. Obviously we would like to avoid a situation where folks 'yum update' their drivers to a release that doesn't support their hardware and breaks their system. Thus we would like to help users who will be affected transition to the correct legacy driver now and so avoid future issues. If anyone needs any advice / help, please just ask.

1 0

CentOS-announce Digest, Vol 118, Issue 10
by centos-announce-request＠centos.org 17 Dec '14

17 Dec '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2014:1996 CentOS 7 selinux-policy BugFix Update (Johnny Hughes) 2. CESA-2014:1999 Moderate CentOS 6 mailx Security Update (Johnny Hughes) 3. CESA-2014:1999 Moderate CentOS 7 mailx Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 16 Dec 2014 17:19:06 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2014:1996 CentOS 7 selinux-policy BugFix Update Message-ID: <20141216171906.GA6656(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1996 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1996.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: df417c53ae850df24a70b10e5f7e770446699f60f721295ef3804b0fe8b16c88 selinux-policy-3.12.1-153.el7_0.13.noarch.rpm 0b50edf557adeae21b3625aa6dec734ba44785776042264d5534e8ade565763d selinux-policy-devel-3.12.1-153.el7_0.13.noarch.rpm bf749beedfe72656e549e9f63687922e7a372734279ea466e54d349038ac6750 selinux-policy-doc-3.12.1-153.el7_0.13.noarch.rpm 6c7d4275cdb5f79854785d95a1d9ba31d65721586b5fccc9009d80a7a451206a selinux-policy-minimum-3.12.1-153.el7_0.13.noarch.rpm 24f6e1123dc0c3137cd226a72bbbd4db71b47f4c20dbea8c03fa29d1bed1242e selinux-policy-mls-3.12.1-153.el7_0.13.noarch.rpm 002a0b6b6d5ab4e22218d498a9bda081a099855e4820aac5a81415354162bed9 selinux-policy-sandbox-3.12.1-153.el7_0.13.noarch.rpm af3502da2d3e223ab7835be0798dea9f1c49a25a91e25dcd527a37a6ac0576fc selinux-policy-targeted-3.12.1-153.el7_0.13.noarch.rpm Source: 2004bd1b7093be621c408ee9e784c90c15fb4897b72ffb04b89c01d4a27a8091 selinux-policy-3.12.1-153.el7_0.13.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Tue, 16 Dec 2014 20:39:59 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2014:1999 Moderate CentOS 6 mailx Security Update Message-ID: <20141216203959.GA10061(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:1999 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-1999.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: efa814c3336a5e9fcf0e499f5a54b89db7333546df8c722072dc80f1fdf22cc0 mailx-12.4-8.el6_6.i686.rpm x86_64: 87fa0a15a4fad791b7257b7dfe37c4fde6d731455b9426a576c525549d7ece17 mailx-12.4-8.el6_6.x86_64.rpm Source: 9b569d1398851e8bb2a35773567677753fd052f95002d31dc8cc7ce76c1d6d78 mailx-12.4-8.el6_6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Tue, 16 Dec 2014 20:46:34 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CESA-2014:1999 Moderate CentOS 7 mailx Security Update Message-ID: <20141216204634.GA19650(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:1999 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-1999.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 5145adac44326a40872e3428a84bc73edb54861f19e75d19b428fabc5f234ab8 mailx-12.5-12.el7_0.x86_64.rpm Source: b794bdb24f56c7f864642b96f56b4732f931ccdc3ef5032778ebfc1aba2b9b32 mailx-12.5-12.el7_0.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 118, Issue 10 ************************************************

1 0

Re: [CentOS] flash-plugin
by kqt4at5v＠gmail.com 16 Dec '14

16 Dec '14

On Tue, 16 Dec 2014, m.roth(a)5-cent.us wrote: > kqt4at5v(a)gmail.com wrote: >> Redhat updated flash-plugin last Thursday. It there one for CentOS or >> should I use the Redhat update? > > I yum updated flash-plugin last Friday, I think, for all of our CentOS > systems. > > mark > What am I doing wrong? # yum update flash-plugin Setting up Update Process No Packages marked for Update # yum install flash-plugin Setting up Install Process Package flash-plugin-11.2.202.394-0.1.el6.rf.i686 already installed and latest version Nothing to do

4 5

flash-plugin
by kqt4at5v＠gmail.com 16 Dec '14

16 Dec '14

Redhat updated flash-plugin last Thursday. It there one for CentOS or should I use the Redhat update?

2 1

Re: [CentOS] UC One-time reboot into alternate kernel?
by Michael Schumacher 16 Dec '14

16 Dec '14

Hi, > If you are using GRUB 0.97 (legacy GRUB), then this capability is > provided by the "default saved" and "fallback" commands. See sections > 4.3.1 and 4.3.2 in the manual: You should keep in mind that this may not save you from pressing the reset button if the system hangs at boot (as far as I understand). However, you are right that this is a mechanism to boot a fallback kernel if booting fails. best regards --- Michael Schumacher

1 0

CentOS-announce Digest, Vol 118, Issue 9
by centos-announce-request＠centos.org 16 Dec '14

16 Dec '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2014:1988 CentOS 7 opencryptoki BugFix Update (Johnny Hughes) 2. CEBA-2014:1990 CentOS 7 libkkc FASTTRACK BugFix Update (Johnny Hughes) 3. CEBA-2014:1994 CentOS 7 ibus-kkc FASTTRACK BugFix Update (Johnny Hughes) 4. CEBA-2014:1989 CentOS 6 resource-agents BugFix Update (Johnny Hughes) 5. CEBA-2014:1960 CentOS 7 publican FASTTRACK BugFix Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 15 Dec 2014 13:06:03 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2014:1988 CentOS 7 opencryptoki BugFix Update Message-ID: <20141215130603.GA17501(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1988 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1988.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: d6209a40121dd8bad6d6d58400a4c6d214a56097f7c01436034309e6531b27f0 opencryptoki-3.0-11.el7_0.1.i686.rpm 07662f632f141cd1f4816da0222b9e1f98b27d3119762319725cd96a428af4e8 opencryptoki-3.0-11.el7_0.1.x86_64.rpm f2fffba1b163939ed59cf19f3998517f00ec7538c55701a5749913eddf62f141 opencryptoki-devel-3.0-11.el7_0.1.i686.rpm bc8f777c136bebd26b3f432f6a13a0664a099ba0a3a3f928309ea0880cff84c6 opencryptoki-devel-3.0-11.el7_0.1.x86_64.rpm ac8fc215f0b422d749ba47e01e5534e4b64c59588be67b2f3ea7d5aa03620ac7 opencryptoki-icsftok-3.0-11.el7_0.1.i686.rpm d98c40c230079ceed85e26f9eb5310fc990aa817935029dd166477b88a06f417 opencryptoki-icsftok-3.0-11.el7_0.1.x86_64.rpm 45a79bbb90ac37ae8c50b2b0a8021cce0471fa24a5500b5c6fcacb894ff84971 opencryptoki-libs-3.0-11.el7_0.1.i686.rpm ff468453bb436bbda3a0e5086de4e64683a5ddd1c48cae58b597273d03b8a86a opencryptoki-libs-3.0-11.el7_0.1.x86_64.rpm 6e4ae5431fd446c67f7d30f5eddf9405b8a8a48d7fc009669115ae2dd679d898 opencryptoki-swtok-3.0-11.el7_0.1.i686.rpm f88cda9ee1ead1a12eac0a417f678b93bbf39d617eba01980887780e89c54041 opencryptoki-swtok-3.0-11.el7_0.1.x86_64.rpm e0c7a7d65f0484b29398db810a660365866601f5e266ae0c39c86f8e89c9d357 opencryptoki-tpmtok-3.0-11.el7_0.1.i686.rpm 40c1980d550163a467bc4792e4bae4341cb1a3ff66435a58fe755cb22fa26ed8 opencryptoki-tpmtok-3.0-11.el7_0.1.x86_64.rpm Source: 6e2b585c1bb95f7389a8600d0ab9cec46a40f273982752f2ea0da7e98523e731 opencryptoki-3.0-11.el7_0.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 15 Dec 2014 13:06:18 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2014:1990 CentOS 7 libkkc FASTTRACK BugFix Update Message-ID: <20141215130618.GA17957(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1990 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1990.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: a4fda80f94cd2dae1d1d3886eae33af2895f0cca94d7cd3d671781ab71a22e13 libkkc-0.3.1-5.el7.i686.rpm 2ef2cb05367f290906855179bf7db20cb8ab05df604270230c186550ab6aa203 libkkc-0.3.1-5.el7.x86_64.rpm 51315e296e4d2a37872f676bdea0508c670e7b63a4635068d93b525eab4175f5 libkkc-common-0.3.1-5.el7.noarch.rpm 1e1942873a6078677df85ec5faf4228ffd61a1d729e134cb09a8ff4801a737ec libkkc-data-0.3.1-5.el7.x86_64.rpm 5cbaac654e66a684b34c772e685742315411c298103c6c1f5512b7cead8dfb9a libkkc-devel-0.3.1-5.el7.i686.rpm ab232db1b9b2caa1347c2ce903f3af15229c3069143e32b69224291705ffb95f libkkc-devel-0.3.1-5.el7.x86_64.rpm 1ac261fb3b846bb19ac622252c640ba05cb480a19084372f47a628fb304e1cfb libkkc-tools-0.3.1-5.el7.x86_64.rpm Source: 9e3299d907b38078defcb9f2b44b9530a225056f9a2f7cb71fd35a6975148c4b libkkc-0.3.1-5.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Mon, 15 Dec 2014 13:06:32 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2014:1994 CentOS 7 ibus-kkc FASTTRACK BugFix Update Message-ID: <20141215130632.GA20512(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1994 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1994.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: ee80531cb445a2b5e646157569f445f026ef135785450f2581d7be91c92fe5e2 ibus-kkc-1.5.18-5.el7.x86_64.rpm Source: 8e7b7bcbc9be87d6eb84da150c398f91c2cb7c2088f134992ce7fa04c974b346 ibus-kkc-1.5.18-5.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Mon, 15 Dec 2014 13:18:12 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2014:1989 CentOS 6 resource-agents BugFix Update Message-ID: <20141215131812.GA28173(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1989 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1989.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 26a444a6923feacce3076d3cc599c8056f8f9f4da4ca0d2604e4ac542cdbf983 resource-agents-3.9.5-12.el6_6.1.i686.rpm x86_64: b955d04f3c4f85bd00aac3ef753e24f6d8510ef5dab79b188b5160219c2fbf3d resource-agents-3.9.5-12.el6_6.1.x86_64.rpm bc80e2628bb4ee5b9afb2cc9f79be2175342c367b0b719908111c43953b6761f resource-agents-sap-3.9.5-12.el6_6.1.x86_64.rpm Source: d56c89d09a8a9276bdf66c1797466394026e85b7e4cccd03c362db31f7322066 resource-agents-3.9.5-12.el6_6.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Mon, 15 Dec 2014 15:38:00 +0000 From: Johnny Hughes <johnny(a)centos.org> To: centos-announce(a)centos.org Subject: [CentOS-announce] CEBA-2014:1960 CentOS 7 publican FASTTRACK BugFix Update Message-ID: <20141215153800.GA38784(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1960 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1960.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: dc2b3a7f255b5c2ab4ffdabbef6a81dd6bb0130a6c1b8a29daf58da3ecda1525 publican-3.2.0-4.el7.noarch.rpm d580d770f4d36ea0371b6dbd3efd2facab597b635561625e0e24faf66f3f7968 publican-common-db5-web-3.2.0-4.el7.noarch.rpm f0045d7a9a12215fbbcd02bda8729dbdd7c0f1cf31657aa92c369713a290360d publican-common-web-3.2.0-4.el7.noarch.rpm a3f048249bb52ca5b9035f32fc83a4cd3f46718f37a68ff92cd343a29eabadca publican-doc-3.2.0-4.el7.noarch.rpm Source: 14cdd3f64022a5b3b89bc58c5f08b7c2f6ac95e91f819201b2fc00857dd4d5a1 publican-3.2.0-4.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 118, Issue 9 ***********************************************

1 0

Re: [CentOS] One-time reboot into alternate kernel?
by tony＠softins.co.uk 16 Dec '14

16 Dec '14

In article <20141215113303.E0AE4A00424(a)mail.centos.org>, Rushton Martin <JMRUSHTON(a)qinetiq.com> wrote: > If you are using GRUB 0.97 (legacy GRUB), then this capability is > provided by the "default saved" and "fallback" commands. See sections > 4.3.1 and 4.3.2 in the manual: > > http://www.gnu.org/software/grub/manual/legacy/grub.html Excellent - just what I was looking for. Thanks! Tony > >-----Original Message----- > >From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On > >Behalf Of Tony Mountifield > >Sent: 15 December 2014 11:01 > >To: centos(a)centos.org > >Subject: [CentOS] One-time reboot into alternate kernel? > > > >Apologies if this should be well-known, but I couldn't find anything! > > > >Situation: a system in a remote location, with no KVM, IPMI or iLO, and > >therefore no console access, only ssh. Multiple kernels listed in > >grub.conf. > > > >Is there a way to reboot temporarily into one of the other kernels > >listed in grub.conf, without changing the default= line, so that a > >subsequent reboot will default back to the original kernel? > > > >The problem I have is that having changed the default= line to select a > >kernel that doesn't boot properly, I need to have someone visit the > >console in order manually to select the working kernel again. I would > >like to avoid that situation if possible. > > > >Thanks, > >Tony -- Tony Mountifield Work: tony(a)softins.co.uk - http://www.softins.co.uk Play: tony(a)mountifield.org - http://tony.mountifield.org

1 0

Using a "compose key" on Centos6
by Fred Smith 15 Dec '14

15 Dec '14

Hi all! I ran into a description of how to set up a compose key for F21 and decided to see if it would work on C6. Well, the right configuration dialog exists, and I can choose a key to use, but after completion, the compose key doesn't seem to work. It works like a charm on Centos-7, though. If I select Right Win as the compose key, typing <compose>ae results in "�" as I expect. but doing the same thing on Centos-6 gives me an unadorned "ae", not the ligature, but the individual characters. i.e., it doesn't do anything helpful. Since the keyboard setup dialog includes the options to define a compose key I'm going to assume it's supposed to work, and th at I'm just overlooking something. Anybody got any good suggestions? thanks! -- ------------------------------------------------------------------------------- Under no circumstances will I ever purchase anything offered to me as the result of an unsolicited e-mail message. Nor will I forward chain letters, petitions, mass mailings, or virus warnings to large numbers of others. This is my contribution to the survival of the online community. --Roger Ebert, December, 1996 ----------------------------- The Boulder Pledge -----------------------------

1 1

[OT} Odd tmux behaviour on exit
by James B. Byrne 15 Dec '14

15 Dec '14

CentOS-6.6 tmux-1.6 (epel) Twice now I have experienced the situation where upon exiting from a tmux initiated session on a remote host instead of returning to the originating session I see this in the session terminal display: <pre> ················································································ ·································<infinite>····································· . . . <infinite lines of dots> . . . ·································<infinite>····································· ················································································ <pre> If I resize the terminal window then the dots expand to fill the available display. The scroll-back is not affected. I am unable to regain control of that terminal session from within the session itself. Looking at the processes runnin on that host from a direct ssh session shows this: <pre> # ps -ef | grep ssh root 1502 1 0 Dec12 ? 00:00:06 /usr/sbin/sshd root 10798 1502 0 10:00 ? 00:00:09 sshd: root@pts/0 root 13015 10810 0 10:12 pts/1 00:00:08 ssh inet07 -t -Y tmux || /bin/bash root 13017 1502 0 10:12 ? 00:00:08 sshd: root@pts/2 root 15622 1502 0 10:45 ? 00:00:00 sshd: root root 16033 1502 1 10:47 ? 00:00:00 sshd: root@pts/3 root 16099 16038 3 10:48 pts/3 00:00:00 grep ssh [root@inet07 ~]# ps -ef | grep 10810 root 10810 10809 0 10:00 pts/1 00:00:00 -bash root 13015 10810 0 10:12 pts/1 00:00:08 ssh inet07 -t -Y tmux || /bin/bash root 16113 16038 0 10:48 pts/3 00:00:00 grep 10810 [root@inet07 ~]# ps -ef | grep 10809 root 10809 1 0 10:00 ? 00:00:03 tmux root 10810 10809 0 10:00 pts/1 00:00:00 -bash root 16115 16038 3 10:48 pts/3 00:00:00 grep 10809 </pre> pts/3 is the diect ssh connection. pts/1 appears to be the tmux session instigated from the ssh login pts/2. I am guessing that the problem is somewhere in the shutdown of pts/1. If I kill 13015 (pts/1) from the direct ssh connection then I return control of the tmux session back to the terminal and I remain logged on to the remote host. If I then exit the remote host I return to the original host as expected. Tmux is called from the original session using a function named sshtn as defined below: # declare -f sshta () { ssh "$*" -t -Y 'tmux a || tmux || /bin/bash' } sshtn () { ssh "$*" -t -Y 'tmux || /bin/bash' } Anyone have any ideas on what might be causing this; and is there any way of preventing it? In this instance I had opened an X-Window application (gvim) in the remote tmux instance and had subsequently shut that down prior to exiting. Nonetheless, I am wondering if that has anything to do with the situation. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3 -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

Pre-packaged Python 2.7 for 32-bit CentOS 6?
by Alfred von Campe 15 Dec '14

15 Dec '14

Either this doesn’t exist or my Google-foo is failing me this morning. I keep coming across the Software Collections Repository (http://wiki.centos.org/AdditionalResources/Repositories/SCL) but that is for 64-bit only. Before I attempt to create Python-2.7 RPMs for 32-bit CentOS 6 to install into /usr/local or /opt/python-2.7, I wonder if someone else has done this so I don’t have to re-invent the wheel. Thanks, Alfred

2 2

Re: [CentOS] need guidance on getting started...again
by James B. Byrne 15 Dec '14

15 Dec '14

On Mon, December 15, 2014 05:43, John Doe wrote: > From: Darr247 <darr247(a)gmail.com> > >> And logging in as root for everyday tasks is generally discouraged, as well. >> Most admins will edit their /etc/sudoers file to give themselves sudo >> access, so they could run >> [username@machinename ~]$ sudo yum install man-1.6f* man-pages-3.22-* >> (which will then prompt for the user's password, not the root password) >> instead of logging in as root. > > > I must be a bad admin because I rarely use sudo (only to limit > some access to some commands to some users). > > That would make me prepand 99% of my daily commands with sudo. > After a while, that gets annoying... > IMHO, this rule is good for users/workstations, not admins/servers. > > And even on my workstation I have a dedicated root window where I do root > stuff. +1 from another 'bad-admin' I log on at the console with a non-privileged account. But then I immediately go into the X-Windows desktop and open a logon terminal session. There I su -l to root and leave it open; tmux'ing over ssh from there to all the other hosts as required. I do have that 'root' terminal session profiled with a red background. Just to remind me of where I am. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

Re: [CentOS] UC One-time reboot into alternate kernel?
by Rushton Martin 15 Dec '14

15 Dec '14

If you are using GRUB 0.97 (legacy GRUB), then this capability is provided by the "default saved" and "fallback" commands. See sections 4.3.1 and 4.3.2 in the manual: http://www.gnu.org/software/grub/manual/legacy/grub.html >-----Original Message----- >From: centos-bounces(a)centos.org [mailto:centos-bounces@centos.org] On >Behalf Of Tony Mountifield >Sent: 15 December 2014 11:01 >To: centos(a)centos.org >Subject: [CentOS] One-time reboot into alternate kernel? > >Apologies if this should be well-known, but I couldn't find anything! > >Situation: a system in a remote location, with no KVM, IPMI or iLO, and >therefore no console access, only ssh. Multiple kernels listed in >grub.conf. > >Is there a way to reboot temporarily into one of the other kernels listed >in grub.conf, without changing the default= line, so that a subsequent >reboot will default back to the original kernel? > >The problem I have is that having changed the default= line to select a >kernel that doesn't boot properly, I need to have someone visit the >console in order manually to select the working kernel again. I would >like to avoid that situation if possible. > >Thanks, >Tony >-- >Tony Mountifield >Work: tony(a)softins.co.uk - http://www.softins.co.uk >Play: tony(a)mountifield.org - http://tony.mountifield.org >_______________________________________________ >CentOS mailing list >CentOS(a)centos.org >http://lists.centos.org/mailman/listinfo/centos This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. QinetiQ may monitor email traffic data and also the content of email for the purposes of security. QinetiQ Limited (Registered in England & Wales: Company Number: 3796233) Registered office: Cody Technology Park, Ively Road, Farnborough, Hampshire, GU14 0LX http://www.qinetiq.com.

1 0

need guidance on getting started...again
by Clayton Kirkwood 15 Dec '14

15 Dec '14

Hello, It's been about 15 years since I've enjoyed working in the Unix space, and I am trying to reintegrate myself. A few things have changed in the intervening years. I've installed the first Centos6 iso without too much difficulty, but I am rusty on commands and such. It appears the install doesn't install mans so would somebody suggest a way to find and install them. It appears that there are several install package implementations. Which is the best to use? Any other helpful guidance would be greatly appreciated. I'm going with Centos 6 because I only have a 32 bit machine, otherwise I'd be up on 7, I would think. Thanks, Clayton You can tell the caliber of a man by his gun--c. kirkwood

4 5

Error: libusb-1.0.so.0 is needed....
by ken 15 Dec '14

15 Dec '14

Trying to install Canon printer driver package (rpm), I get a dependency error: libusb-1.0.so.0 is needed.... The version currently installed on my 5.9 system is libusb-0.1.12-6.el5 and, AFAIK (per yum), no upgrade to that is available. So question: Do higher centos versions have libusb-1.0.so ? (We could perform a quick inventory with: uname -r; rpm -q libusb Thanks.

4 4

Howto install Centos6/7 Comcast WA/OR
by david 15 Dec '14

15 Dec '14

Has anyone managed to install a Centos6 or Centos7 in Washington or Orgegon, or anywhere else that Comcast has deployed the IPV6to4 routers. The router in question is a Xfinity DCP3939 Router with Wireless, and I'm trying to get a Centos system working behind that router (with a wired connection), and enable SSH access from outside. Does one have to enable both IPV6 and IPV4? Can I enable IPV6 after install, or do I have to restart the installation from scratch (it has Centos6 installed via an earlier IPV4 router). How does one configure the router so that its DHCP system awards a known address to that machine, and how to forward port 22? The extra problem is that I'm trying to advise the owner of this configuration remotely. Behind that same router he has a working Windows 7 machine, and I can use Team Viewer to view the router's configuration from "inside". Any assistance would be appreciated. Comcast is of no help. David

2 1

Broadcom wireless card: installation script for Linux-STA driver
by Niki Kovacs 15 Dec '14

15 Dec '14

Hi, I just installed CentOS 6.6 on my HP Pavilion DM1 laptop. The wireless card is only poorly supported in the default setup, so I decided to write an installation script for the Linux-STA driver, which works perfectly. https://github.com/kikinovak/centos/blob/master/6.x/broadcom-sta/broadcom-s… Grab the files: # git clone https://github.com/kikinovak/centos Run the script: # cd centos/6.x/broadcom-sta # broadcom-sta.sh Reboot and you're ready to go. Cheers, Niki -- Microlinux - Solutions informatiques 100% Linux et logiciels libres 7, place de l'église - 30730 Montpezat Web : http://www.microlinux.fr Mail : info(a)microlinux.fr Tél. : 04 66 63 10 32

4 5

bug report and resolved patch for remove_hrtimer in CentOS 6.x
by Jia He 14 Dec '14

14 Dec '14

Hi, I happened to meet with a similar issue like https://bugs.centos.org/view.php?id=7051 I found the root cause might be fixed by commit f13d4f979c518119bba5439dd2364d76d31dcd3f. The commit in branch linux-2.6.32-y is 0bd9ac380a44611e953b1657d7f54075b2f77fb0 This issue is existed in centOS 6.6 also any ideas

1 0

Remote Git vs. GNOME on CentOS 6.6: cannot open display
by Niki Kovacs 13 Dec '14

13 Dec '14

Hi, I just installed a fresh CentOS 6.6 desktop. It's a client's machine, it is physically installed on a testbench in my office. Usually, when I perform installations, I start with the base system on the testbench, and once networking is configured, I SSH into it and then do all the fine-tuning remotely. My configuration files, scripts and HOWTOs are all stored in a Github repository. The problem I have with the default configuration of Git under CentOS is that GNOME "hijacks" Git's authentication process. Meaning whenever Git asks for credentials, this happens in a very ugly authentication window. But the real problem is in a remote session, where I can't use Git anymore. Here's what I get: [root@optiplex-330 ~]# git clone https://kikinovak@github.com/kikinovak/centos Initialized empty Git repository in /root/centos/.git/ (gnome-ssh-askpass:2440): Gtk-WARNING **: cannot open display: Anyone knows how to stop this annoying behavior? I'm typing these lines on a Slackware64 14.1 + KDE installation, and when I use Git on this machine, credentials are always asked for in the terminal itself, not in a GUI popup. Cheers, Niki -- Microlinux - Solutions informatiques 100% Linux et logiciels libres 7, place de l'église - 30730 Montpezat Web : http://www.microlinux.fr Mail : info(a)microlinux.fr Tél. : 04 66 63 10 32

1 1

AV on usb
by Rajagopal Swaminathan 13 Dec '14

13 Dec '14

Greetings. Could be a anybody please would be kind enough enough to point to USB burnable iso image(or the soit). . Regards, Rajagopal

1 0

Centos 7 how to make second disk of RAID1 bootable
by Jeff Boyce 12 Dec '14

12 Dec '14

Greetings - Ok, I have my CentOS 7 KVM host system installed and I want to be able to boot the system from either installed drive if one of them fails. My objective is to have the following layout for the two 3 TB disks. sda1 /boot/efi sda2 /boot sda3 RAID1 with sdb3 sdb1 /boot/efi sdb2 /boot sdb3 RAID1 with sda3 The system is installed and boots from sda[1,2] and md127 (sda3 and sdb3). sdb[1,2] were untouched during the installation, and had been partitioned as FAT32 prior to the installation exactly the same as sda[1,2] using GParted. A GPT partition table was added to both disks before partitioning. The current partition information for my two drives is: Disk /dev/sda: 5860533168 sectors, 2.7 TiB Logical sector size: 512 bytes Disk identifier (GUID): 0C26A36C-3857-4E97-85CC-2D4E57F4015A Partition table holds up to 128 entries First usable sector is 34, last usable sector is 5860533134 Partitions will be aligned on 2048-sector boundaries Total free space is 2925 sectors (1.4 MiB) Number Start (sector) End (sector) Size Code Name 1 2048 1026047 500.0 MiB EF00 EFI System Partition 2 1026048 2050047 500.0 MiB 0700 3 2050048 5860532223 2.7 TiB FD00 Disk /dev/sdb: 5860533168 sectors, 2.7 TiB Logical sector size: 512 bytes Disk identifier (GUID): A3F0F6C1-A395-4A24-8940-BDE803E5D073 Partition table holds up to 128 entries First usable sector is 34, last usable sector is 5860533134 Partitions will be aligned on 2048-sector boundaries Total free space is 2925 sectors (1.4 MiB) Number Start (sector) End (sector) Size Code Name 1 2048 1026047 500.0 MiB 0700 2 1026048 2050047 500.0 MiB 0700 3 2050048 5860532223 2.7 TiB FD00 sda1 and sda2 were reformatted during installation; with sda1 showing in GParted now as FAT16 and a boot flag, and sda2 showing as XFS without a boot flag. sdb[1,2] still show as FAT32 and have no files on them. What is the simplest and least error-prone way to make my second drive (sdb) bootable if the first drive (sda) were to fail? I have done a lot of Googling over the last few days to try and understand what needs to be done, and almost everything I find is outdated in that it does not reference using grub2, and does not reference UEFI booting. I am open to reading more how-to's if someone knows of a good one that I may have missed in the 50 plus guides I have looked at. I suspect that this is really not that difficult, but the detail that I need seems to be missing in what I have read. Any responses may cc me directly as I only get the daily digest. Thanks. Jeff Boyce Meridian Environmental

1 0

HOWTO Stratum 1 NTP server under CentOS 7
by xaos 12 Dec '14

12 Dec '14

Hello everyone, If anyone is interested, I have created a HOWTO on running a Motorola GPS receiver connected to a CentOS 7 box via serial port (com1), with 1PPS over DCD. The trick here is that CentOS 7 uses systemd and setup was a bit different. Anyway, everything works. The result is a highly accurate NTP server, Stratum 1. Here is the documentation. http://www.maximaphysics.com/Centos_7_GPS_Setup.html Let me know if something does not look right. -George, N2FGX

6 9

httpd listening only on IPv6 interface on CentOS 7
by Warren Young 12 Dec '14

12 Dec '14

I’ve held off reporting this since I thought it might just be some kind of fluke, but I’ve seen it now on three different boxes. The symptom is that the stock configuration of Apache only listens for IPv6 connections: $ netstat -na | grep :80.*LISTEN tcp6 0 0 :::80 :::* LISTEN You should see a second line there for IPv4, but you don't: tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN The stock httpd.conf file just says “Listen 80” which is documented as listening on both IPv4 and IPv6. [1] You’re supposed to need to go out of your way to get it to listen on just one or the other, but somehow CentOS 7’s Apache manages it. Since I only need IPv4, I’ve managed to hack it into working by changing that line in /etc/httpd/conf/httpd.conf to: Listen 0.0.0.0:80 Why do I need to do this? [1] https://httpd.apache.org/docs/2.4/mod/mpm_common.html#listen

4 5

More avc's wrt to email
by James B. Byrne 12 Dec '14

12 Dec '14

CentOS-6.6 Postfix-2.11.1 (local) ClamAV-0.98.5 (epel) Amavisd-new-2.9.1 (epel) opendkim-2.9.0 (centos) pypolicyd-spf-1.3.1 (epel) Is there something going on in selinuxland with respect to clamav, amavisd-new and postfix? Since the most recent update of clamav I seem to be detecting more avc's. It may be that it is because I am looking for them more frequently but it seems to me that something has happened external to my control. The most recent things I see are these: audit2allow -l -a #============= amavis_t ============== allow amavis_t sysfs_t:dir read; allow amavis_t sysfs_t:file open; #============= clamscan_t ============== #!!!! The source type 'clamscan_t' can write to a 'dir' of the following types: # clamscan_tmp_t, clamd_var_lib_t, tmp_t, root_t allow clamscan_t amavis_spool_t:dir write; #============= postfix_smtp_t ============== allow postfix_smtp_t postfix_spool_maildrop_t:file open; #============= spamd_t ============== allow spamd_t etc_runtime_t:file append; Is there anything wrong with just creating a local policy module for these and loading it? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss