- Discuss - lists.centos.org

Centos 7 and Network/Bridges
by Oliver Schad 17 Aug '14

17 Aug '14

Hi all, I'm a little bit confused about networking in Centos 7: I've copied my bridge setup from a Centos 6 for KVM networking to Centos 7. I changed the interface name to the new schema and I had expect that it would work. But: The Bridges didn't came up with the following log message: "Error: Device 'br61' is waiting for slaves before proceeding with activation" Config: DEVICE=br61 ONBOOT=yes TYPE=Bridge BOOTPROTO=none DELAY=3 STP=yes NM_CONTROLLED="no" Some more messages from the same type for other bridges. Sounds like a dependency problem. The bridges were created but they all were in state "down". The physical vlan tagged interfaces were not created, which should be bridged to those bridges above. Playing with STP and Delay didn't help. Because I saw no error, I removed the NetworkManager and it worked. Now when I reboot the system doesn't exit the SSH daemon before removing network interface so you end up in a hanging SSH connection. Ok, minor problem. Does somebody have similar dependency problems? Best Regards Oli

1 1

Re: [CentOS] Instaling LAMP on CentOS 7.x
by James B. Byrne 17 Aug '14

17 Aug '14

On Thu, August 14, 2014 11:26, John Plemons wrote: > If you are looking for another method for mySQL management, then > webmin.com works too. Download the RPM package, ver. 1.700, it will > allow you to do a great number of tasks remotely via the web. > I would advise that if you choose to use Webmin (and I do) then you should consider having it listen only on one IP address where more than one virtual IP is available. Further, the IP address and port (default is 10000) used by Webmin should be blocked by firewall settings to prevent direct access from the Internet. Instead you should use some form of tunnelling to establish a secure link to your LAN or to the host system itself. Even then you should only permit connections from known addresses from within your LAN. You should also enable and require TLS (https) connections for Webmin as otherwise privileged user credentials are exposed. There are configuration choices available in Webmin to do this but these present a chicken and egg problem as the default setup uses plain http. If this is an issue then you can get around this by manually changing the following configuration settings in /etc/webmin/miniserv.conf using an editor over an ssh connection after installing but before using Webmin: ssl=1 ssl_redirect=1 certfile=/etc/webmin/miniserv.pem # default set up with webmin install keyfile=/etc/webmin/miniserv.pem # default set up with webmin install Or you can use a one-time set of credentials and change them immediately after setting Webmin to use https. Regardless of how you set up Webmin's https access you also require this Perl module to get Webmin over https to work: yum install perl-Net-SSLeay For remote access the simplest tunnel I have discovered employs ssh and Firefox proxied to use SOCKSV on localhost port 2001 (127.0.0.1:2001). Something like: ssh -p 22 \ -o ServerAliveInterval=30 \ -o ServerAliveCountMax=10 \ user-id(a)internal.host.domain.tld \ -D 2001; As a refinement I set up a specially configured sshd service that also listens on ports 80 and 443. This permits me to change the ssh port from 22 to 80 or 443 whenever a network provider decides that ssh is not part of their service (Hello Westin. . .) If you are using PuTTY as the ssh client then you can do the same thing in the /Connection/SSH configuration by adding 2001 as a source port and selecting Dynamic as the destination type. You specify the ssh connection port in the Basic Options for the Session set up. HTH -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

1 0

centos6 selinux-policy-targeted not getting installed properly from kickstart
by Andrew Lau 17 Aug '14

17 Aug '14

Hi, I'm using this kickstart to build a centos AMI, https://gist.github.com/andrewklau/9c354a43976d951bdedd For some reason, selinux isn't getting installed correctly, on first boot: $ semodule -B libsemanage.semanage_link_sandbox: Could not access sandbox base file /etc/selinux/targeted/modules/tmp/base.pp. (No such file or directory). semodule: Failed! Proceeding to do anything else selinux related fails as well. The only solution has so far been to yum reinstall selinux-policy-targeted Anyone know why this could be happening? Thanks, Andrew

1 0

LVM Configuration
by Günther J. Niederwimmer 17 Aug '14

17 Aug '14

Hello, I miss the system-config-lvm tool for CentOS 7 can I found this on a other place? -- mit freundlichen Grüßen / best Regards, Günther J. Niederwimmer

6 8

Bind config question, centos 5.10
by Chuck Campbell 16 Aug '14

16 Aug '14

I must have something mis-configured in my bond setup. Things are working, but I'm getting TONS of this sort of stuff in my log: +2001:502:ad09::4#53: 1 Time(s) network unreachable resolving 'kns1.kuwaitnet.net/A/IN': +2001:503:231d::2:30#53: 1 Time(s) network unreachable resolving 'kns1.kuwaitnet.net/A/IN': +2001:503:a83e::2:30#53: 1 Time(s) network unreachable resolving 'kns1.kuwaitnet.net/AAAA/IN': +2001:503:231d::2:30#53: 1 Time(s) network unreachable resolving 'kns1.kuwaitnet.net/AAAA/IN': +2001:503:a83e::2:30#53: 1 Time(s) network unreachable resolving 'kns2.kuwaitnet.net/A/IN': +2001:503:231d::2:30#53: 1 Time(s) network unreachable resolving 'kns2.kuwaitnet.net/A/IN': +2001:503:a83e::2:30#53: 1 Time(s) network unreachable resolving 'kns2.kuwaitnet.net/AAAA/IN': +2001:503:231d::2:30#53: 1 Time(s) network unreachable resolving 'kns2.kuwaitnet.net/AAAA/IN': +2001:503:a83e::2:30#53: 1 Time(s) network unreachable resolving 'kns3.kuwaitnet.net/A/IN': +2001:503:231d::2:30#53: 1 Time(s) network unreachable resolving 'kns3.kuwaitnet.net/A/IN': +2001:503:a83e::2:30#53: 1 Time(s) network unreachable resolving 'kns3.kuwaitnet.net/AAAA/IN': +2001:503:231d::2:30#53: 1 Time(s) I'm not sure where to look. it may be the "any" in the named.conf lines below, but I'm not sure. My named.conf looks like this: options { listen-on port 53 { 127.0.0.1; any; }; # listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; // Those options should be used carefully because they disable port // randomization // query-source port 53; // query-source-v6 port 53; allow-query { localhost; any; }; allow-query-cache { localhost; any; }; # allow-query { localhost; }; # allow-query-cache { localhost; }; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; view localhost_resolver { match-clients { localhost; any; }; match-destinations { localhost; any; }; # match-clients { localhost; }; # match-destinations { localhost; }; recursion yes; include "/etc/named.rfc1912.zones"; }; -- ACCEL Services, Inc.| Specialists in Gravity, Magnetics | (713)993-0671 ph. | and Integrated Interpretation | (713)993-0608 fax 448 W. 19th St. #325| Since 1992 | (713)306-5794 cell Houston, TX, 77008 | Chuck Campbell | campbell(a)accelinc.com | President & Senior Geoscientist | "Integration means more than having all the maps at the same scale!"

3 2

Re: [CentOS] systemd and httpd
by galtsev＠kicp.uchicago.edu 16 Aug '14

16 Aug '14

I don't have passphrases on certificates () ++++++++++++++++++++++++++++++++++++++++ Valeri Galtsev Sr System Administrator Department of Astronomy and Astrophysics Kavli Institute for Cosmological Physics University of Chicago Phone: 773-702-4247 ++++++++++++++++++++++++++++++++++++++++ <div>-------- Original message --------</div><div>From: Jack Bailey <jack(a)internetguy.net> </div><div>Date:2014/08/15 16:52 (GMT-06:00) </div><div>To: centos(a)centos.org </div><div>Subject: Re: [CentOS] systemd and httpd </div><div> </div>On 08/15/14 14:48, Alexander Dalloz wrote: > Am 15.08.2014 um 23:29 schrieb Jack Bailey: >> Hello, >> >> On my new CentOS 7 server httpd stops running after about two minutes or >> so. strace shows me the process is asking for a password, and failing >> to get one, times out. In reading the docs I see an option to systemd: >> --no-ask-password. Can anyone tell me where and how to set this? > You are using a passphrase protected SSL key, aren't you? > > https://wiki.apache.org/httpd/RemoveSSLCertPassPhrase I'm moving a web site from CentOS 6 to CentOS 7 where the site currently works without prompting for a password. I'll check to see if the passphase is removed from the cert. Thanks, Jack _______________________________________________ CentOS mailing list CentOS(a)centos.org http://lists.centos.org/mailman/listinfo/centos

1 0

Webalizer not available for CentOS 7?
by Mike McCarthy, W1NR 15 Aug '14

15 Aug '14

It seems that the Webalizer WEB statistics reporting package is no longer available in CentOS 7. Rather than building from Sourceforge and writing custom configuration files for it, is there an alternative? Use the Fedora package? Another WEB analyzer? Thanks, Mike

2 1

systemd and httpd
by Jack Bailey 15 Aug '14

15 Aug '14

Hello, On my new CentOS 7 server httpd stops running after about two minutes or so. strace shows me the process is asking for a password, and failing to get one, times out. In reading the docs I see an option to systemd: --no-ask-password. Can anyone tell me where and how to set this? As a workaround, I added "KillMode=none" to httpd.service, but I'd rather use the option to just not ask for a password. Thanks, Jack

3 3

Centos7 - remove /home and expand / after install?
by Les Mikesell 15 Aug '14

15 Aug '14

I did a default install and after installing some other things I realized that a lot of space was allocated to /home as an lvm that is never going to be used. Is it possible to remove the lvm and grow the root (xfs) filesystem without starting over? -- Les Mikesell lesmikesell(a)gmail.com

2 1

el6 crash-trace-command vendor?
by Denniston, Todd A CIV NAVSURFWARCENDIV Crane 15 Aug '14

15 Aug '14

I was running a rpm -qa --qf "%{vendor} \t\t%{name}\n" |sort|grep -v CentOS looking for packages from other vendors installed on a machine and noticed a curious sight: Fujitsu Limited crash-trace-command It appears I am not the only one who has crash-trace-command from Fujitsu Limited https://www.centos.org/forums/viewtopic.php?f=13&t=1081&start=0#p6688 That is a good thing right? :) I was curious however to find it in my centos mirror, and apparently signed by the centos crew[2]. Would one of our gentle OS maintainers be kind enough to confirm this is just an extension of the issues in bug 5967[1]? (which I found near the end of my web search) Looking a little deeper it appears that there are a couple of other packages (rome) with odd vendors in the 6.5 tree: for i in centos/6/os/i386/Packages/*rpm; \ do rpm -q --qf "%{vendor} \t%{name}\n" -p $i; \ done |grep -v CentOS Fujitsu Limited crash-trace-command Red Hat, Inc. python-qpid-qmf Red Hat, Inc. qpid-qmf (none) rome (none) rome-javadoc Red Hat, Inc. ruby-qpid-qmf [1] http://bugs.centos.org/view.php?id=5967 [2] $ rpm -qa gpg-pubkey\* gpg-pubkey-c105b9de-4e0fd3a3 $ for i in centos/6/os/*/Packages/crash-trace-command-*; \ do echo $i;rpm -q --qf "%{vendor} \t%{name}\n" -p $i;done centos/6/os/i386/Packages/crash-trace-command-1.0-4.el6.i686.rpm Fujitsu Limited crash-trace-command centos/6/os/x86_64/Packages/crash-trace-command-1.0-4.el6.x86_64.rpm Fujitsu Limited crash-trace-command ##Note the lack of ##"warning: centos/6/os/i386/Packages/crash-trace-command-1.0-4.el6.i686.rpm: Header V3 RSA/SHA1 signature: NOKEY, key ID c105b9de" ## which I did get on a CentOS 5 machine doing the same check.

1 0

SELinux vs. logwatch and virsh
by Bill Gee 15 Aug '14

15 Aug '14

Hello everyone - I am stumped ... Does anyone have suggestions on how to proceed? Is there a way to get what I want? The environment: CentOS 7.0 with latest patches. The goal: I want logwatch to include a report on the status of kvm virtual computers. The problem: When run from anacron, SELinux denies permission for the virsh utility. Here is a portion of the logwatch output: --------------------- KVM libvirt status report Begin ------------------------ Date Range: yesterday /etc/logwatch/scripts/services/libvirt: line 15: /usr/bin/virsh: Permission denied ---------------------- KVM libvirt status report End ------------------------- If I "run-parts /etc/cron.daily" from a root console, it all works. Same if I run "logwatch" from a root console. I set SELinux to permissive and that allows virsh to run. Therefore I know it is something to do with SELinux. The logwatch script is: #Lots of comments /usr/bin/virsh list --all I see the selinux security context of virsh is system_u:object_r:virsh_exec_t:s0 while logwatch.pl runs as system_u:object_r:logwatch_exec_t:s0 As I understand it, selinux does not permit having multiple type settings for a file. Any file can have exactly one type setting. I ran this command hoping it would add another type to the virsh program. semanage fcontext -a -t logwatch_exec_t /usr/bin/virsh semanage fcontext --list /usr/bin/virsh | grep virsh /usr/bin/virsh all files system_u:object_r:logwatch_exec_t:s0 /usr/bin/virsh regular file system_u:object_r:virsh_exec_t:s0 /usr/sbin/xl regular file system_u:object_r:virsh_exec_t:s0 /usr/sbin/xm regular file system_u:object_r:virsh_exec_t:s0 Semanage did add the new type, but that did not fix the problem. Virsh still gets "permission denied" when logwatch tries to run it. Thanks - Bill Gee

2 2

Centos 7 as gateway - UDP performance is busted/awful?
by Tom Horsley 15 Aug '14

15 Aug '14

I just replaced a dead system disk on my KVM host that was running an ancient fedora 13. Since centos 7 was available, I decided to go with it to get some long term stability. The problem is that NFS mounts inside the virtual machines don't work for spit when talking to older NFS servers that must speak UDP. Is there something about UDP traffic that requires tweaks I don't know about for centos 7 to serve as a gateway machine? I've got the ip forwarding settings and other sysctl stuff that was set in the old fedora 13 system. I've got the bridges defined that same way as the old f13 system. I've got TCP stream connections working flawlessly, it is just the UDP traffic that seems to barf. Does this strike a familiar note with anyone? When I run wireshark on the KVM host machine, I see NFS packets retransmitting a lot and I also see ICMP messages about Destination Unreachable, Fragmentation Needed. (I don't know what any of it means though :-). This is an intel motherboard with these ethernets: 04:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01) 04:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01)

6 14

CentOS-announce Digest, Vol 114, Issue 9
by centos-announce-request＠centos.org 15 Aug '14

15 Aug '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2014:1056 CentOS 6 glibc Update (Johnny Hughes) 2. CEBA-2014:1057 CentOS 7 dhcp BugFix Update (Johnny Hughes) 3. CEBA-2014:1058 CentOS 7 lorax BugFix Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 14 Aug 2014 12:42:05 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:1056 CentOS 6 glibc Update To: centos-announce(a)centos.org Message-ID: <20140814124205.GA17801(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1056 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1056.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 0aa321759a9c2600d535e439f2d6f27c40414100327f3f55a79361fce806fd0a glibc-2.12-1.132.el6_5.3.i686.rpm 542994b792277a86f69f56169f6989ae4df3efad1722b6d8939269213dcff8cf glibc-common-2.12-1.132.el6_5.3.i686.rpm 41a52d240c8dbb9c3153cee50c03b763e8511a4cc43c94a5f7015c742c577f17 glibc-devel-2.12-1.132.el6_5.3.i686.rpm 7e8a8ffc38bb93ca282ee7f83b1a123ea47ac40c3b8457fa0bd1d38b9087d70e glibc-headers-2.12-1.132.el6_5.3.i686.rpm f1cdbf4132208c8dcfd92f76c6a1395580a4d9242561af95fb7524c7adbd3c56 glibc-static-2.12-1.132.el6_5.3.i686.rpm 948ed1bd86537cab571ae228cb4a2b40de35f1ced8e3bbb9af85c1c43b61d080 glibc-utils-2.12-1.132.el6_5.3.i686.rpm 393daaa3967f0451af17c6d0dd53614bffb84057f9570361e4edbec11b4da352 nscd-2.12-1.132.el6_5.3.i686.rpm x86_64: 0aa321759a9c2600d535e439f2d6f27c40414100327f3f55a79361fce806fd0a glibc-2.12-1.132.el6_5.3.i686.rpm f4849c174991014b0c68fbdd44e88e1ab2d1387f940df29910a42bd24f672c29 glibc-2.12-1.132.el6_5.3.x86_64.rpm 7c7086d89be068c7b0ccb0421e86a16804702af543576ed7d63ed47d3c2302c7 glibc-common-2.12-1.132.el6_5.3.x86_64.rpm 41a52d240c8dbb9c3153cee50c03b763e8511a4cc43c94a5f7015c742c577f17 glibc-devel-2.12-1.132.el6_5.3.i686.rpm 9d6d02d5d540c987f2ba40c5fcda2f249f5147d02ea4fd726b5499cad0c66e04 glibc-devel-2.12-1.132.el6_5.3.x86_64.rpm ffbb30250608e5d01056e3598a7fe4bd37f3680261b005ce76965ab56f2767b5 glibc-headers-2.12-1.132.el6_5.3.x86_64.rpm f1cdbf4132208c8dcfd92f76c6a1395580a4d9242561af95fb7524c7adbd3c56 glibc-static-2.12-1.132.el6_5.3.i686.rpm 7ee821b2f6382ef22cd7192665c67bfe7b2c44d11d2c982cca118a190200479d glibc-static-2.12-1.132.el6_5.3.x86_64.rpm 3958b8a205ae7df1f6cf6decbe70e5c5fad759d8d41b627bb3404674f20d51ed glibc-utils-2.12-1.132.el6_5.3.x86_64.rpm d71932c528b909552291356796420c455bcfb6122dbd21058bdc716fe8ddebf5 nscd-2.12-1.132.el6_5.3.x86_64.rpm Source: 92a4bad8ed4070c35c039c2e04ad72b929f934fdbaabc6e7033ae88876a52e67 glibc-2.12-1.132.el6_5.3.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Thu, 14 Aug 2014 13:39:26 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:1057 CentOS 7 dhcp BugFix Update To: centos-announce(a)centos.org Message-ID: <20140814133926.GA40694(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1057 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1057.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: a4084c7b74bdaa8da08fc6956c251f3e693948a2530bc2b181a65cf961480c8d dhclient-4.2.5-27.el7.centos.1.i686.rpm df3c78924f70cc4e720f0342c5d13b629672ce4cf14dc50ce65204b383c45de3 dhclient-4.2.5-27.el7.centos.1.x86_64.rpm 42f9f68872055407c2955d0fa534f7cf624a5de7eee4152e80ca944e467a65d3 dhcp-4.2.5-27.el7.centos.1.i686.rpm 4ccf970bb20cfaf202675f1941230e87c9f67e4aa838da84384e0add1a101ec1 dhcp-4.2.5-27.el7.centos.1.x86_64.rpm b5d01e7cc3f9a6d9f469765a98f625ed2178ea37ab979bf17324821ddb543b0d dhcp-common-4.2.5-27.el7.centos.1.i686.rpm 1bb58312cc303b1bc05ea03e4b456d8b4d381b7f028f590e396bfd8d7a310bae dhcp-common-4.2.5-27.el7.centos.1.x86_64.rpm c2cc9b5e0f787338ce25190e2722a2af0c761f21dc0d8f70527527bef192a168 dhcp-devel-4.2.5-27.el7.centos.1.i686.rpm 39a99e9a696d7884f68a54e7c8e34f3b45d68b8031f0a44c73b0a6c2e575d64f dhcp-devel-4.2.5-27.el7.centos.1.x86_64.rpm fe5d215ed35928d293326c75f2f2855632da787cefa3e31562afb842e13ca6d7 dhcp-libs-4.2.5-27.el7.centos.1.i686.rpm 28b415a65abf25b741c480260c3c54ce131e5120a477472d659c5bf490216ed7 dhcp-libs-4.2.5-27.el7.centos.1.x86_64.rpm Source: ebe241d0850b9e4a1145eb5777c0f1acbb51c9ec478711c3bb82a79a7f8e0b04 dhcp-4.2.5-27.el7.centos.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Thu, 14 Aug 2014 15:46:18 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:1058 CentOS 7 lorax BugFix Update To: centos-announce(a)centos.org Message-ID: <20140814154618.GA46445(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1058 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1058.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 2de4ca97484abf188c0e9ef38ede2f2e510fe68b6042b59659800f79a5aad541 lorax-19.6.28-3.el7_0.x86_64.rpm Source: 50c264f78b2f021bd5cd886e0ce951fb01fd26793e893fd2c59949b5b7574ed8 lorax-19.6.28-3.el7_0.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 114, Issue 9 ***********************************************

1 0

CentOS SSH Session Logging
by Matt 15 Aug '14

15 Aug '14

Have a OpenVZ Centos 7 Minimal instance running. Normally SSH sessions are logged too /var/log/secure. There is no such file. Where are they put then?

3 5

Instaling LAMP on CentOS 7.x
by Matt 14 Aug '14

14 Aug '14

Have a Centos 7 minimal openvz container I need to install a LAMP setup on. Does anyone recommend anything and have a link too it? I am guessing Mariadb is the new standard?

6 11

Centos Website
by Andreas Benzler 14 Aug '14

14 Aug '14

Hello Guys... Get Centos -> download Minimal Install Images point to 6.5 http://wiki.centos.org/Manuals/ReleaseNotes/CentOSMinimalCD6.5 something like http://wiki.centos.org/Manuals/ReleaseNotes/CentOSMinimalCD7.0 on the website remove http://isoredirect.centos.org/centos/6/isos/i386/ only http://centos.psw.net/centos/7/isos/x86_64/ Thanks.. AndyBe

3 3

CentOS-announce Digest, Vol 114, Issue 8
by centos-announce-request＠centos.org 14 Aug '14

14 Aug '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2014:1053 Moderate CentOS 5 openssl Update (Johnny Hughes) 2. CESA-2014:1052 Moderate CentOS 6 openssl Update (Johnny Hughes) 3. CESA-2014:1052 Moderate CentOS 7 openssl Security Update (Johnny Hughes) 4. CEBA-2014:1045 CentOS 7 kdesdk FASTTRACK BugFix Update (Johnny Hughes) 5. CEBA-2014:1055 CentOS 7 javapackages-tools BugFix Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 13 Aug 2014 19:52:24 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:1053 Moderate CentOS 5 openssl Update To: centos-announce(a)centos.org Message-ID: <20140813195224.GA27416(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:1053 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-1053.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e66f110fb31554cb34087c2109c8ecbeaf5fdab5d1aafba583eaa82bc6aa4d66 openssl-0.9.8e-27.el5_10.4.i386.rpm e9eaa4dc13d30630203c32211ff3566dac570c93b275808376c01de04c111b07 openssl-0.9.8e-27.el5_10.4.i686.rpm 703c2ede3a12adde1f68f6d8f21d01f756ef17f271ebeb9b13c2f25a4219eb1e openssl-devel-0.9.8e-27.el5_10.4.i386.rpm a2bb6855c1d0e614baffaf63b661ebcd35fe9839bc87e0cc472c5d917121fb76 openssl-perl-0.9.8e-27.el5_10.4.i386.rpm x86_64: e9eaa4dc13d30630203c32211ff3566dac570c93b275808376c01de04c111b07 openssl-0.9.8e-27.el5_10.4.i686.rpm 8cd1d4ec4ee5dd64b2c19e3f34f870f9a98211a49103c3419e60a230f146a293 openssl-0.9.8e-27.el5_10.4.x86_64.rpm 703c2ede3a12adde1f68f6d8f21d01f756ef17f271ebeb9b13c2f25a4219eb1e openssl-devel-0.9.8e-27.el5_10.4.i386.rpm 084868678f35a66700cf77f0cb3636551b833b666b44c3dec78a9386ab3c3870 openssl-devel-0.9.8e-27.el5_10.4.x86_64.rpm eca3e442d631bcd7c08092caab63909357746917ac86c1fcc4ae8d858d35095c openssl-perl-0.9.8e-27.el5_10.4.x86_64.rpm Source: e2a9caa34acbc9248f883f944919ae49e461f2cbf5170854f87a3df476579b37 openssl-0.9.8e-27.el5_10.4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 13 Aug 2014 20:10:43 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:1052 Moderate CentOS 6 openssl Update To: centos-announce(a)centos.org Message-ID: <20140813201043.GA40505(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:1052 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-1052.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 8ef27495e88c422646b43fe7339a4bdd7af4c6c435c05df053e89e429d096305 openssl-1.0.1e-16.el6_5.15.i686.rpm 5d4e276dd49951859da2b767973704838c73fb3bd3dedc7714cc0589404478db openssl-devel-1.0.1e-16.el6_5.15.i686.rpm daf7b8d231dd6d127229f97c4c6d6fc05df7511695b7bb3d4fe7931dfadbaf45 openssl-perl-1.0.1e-16.el6_5.15.i686.rpm 4d3d3ac04330820b13999c3b403cbb06f66eaffe2f93e72fdab63830f417c279 openssl-static-1.0.1e-16.el6_5.15.i686.rpm x86_64: 8ef27495e88c422646b43fe7339a4bdd7af4c6c435c05df053e89e429d096305 openssl-1.0.1e-16.el6_5.15.i686.rpm d4b0f9ed18c8b0e6ecfb051b28d1fc622845289516cdaeeefbf4a1d2b4d35b56 openssl-1.0.1e-16.el6_5.15.x86_64.rpm 5d4e276dd49951859da2b767973704838c73fb3bd3dedc7714cc0589404478db openssl-devel-1.0.1e-16.el6_5.15.i686.rpm 89e06875f20993af551125a888e273a2bce1c49f63106753ea60abb3e89621fd openssl-devel-1.0.1e-16.el6_5.15.x86_64.rpm a19e8eab1cc9b5b949987a7a9b1977d2de765906f42fa2840a77e0adf9844db5 openssl-perl-1.0.1e-16.el6_5.15.x86_64.rpm 90cd145a9bd2201d9d207fd41e09a0bd5655a91a26a998d307156d0e10210da7 openssl-static-1.0.1e-16.el6_5.15.x86_64.rpm Source: 368430d3e60f98db5ce8f1c288be26b627d2b75dfa911f46976d336be3ead96d openssl-1.0.1e-16.el6_5.15.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Wed, 13 Aug 2014 20:25:33 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:1052 Moderate CentOS 7 openssl Security Update To: centos-announce(a)centos.org Message-ID: <20140813202533.GA40990(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:1052 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-1052.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: b780a8547cc51e4b5047935df84596e8446f2d0ad5dc554ca4f96add24a49f91 openssl-1.0.1e-34.el7_0.4.x86_64.rpm c7a0dfd837209b6dd675e71f36cb578f741e9eafe111618576633eecebabab66 openssl-devel-1.0.1e-34.el7_0.4.i686.rpm 2bc4b629822d2bb697a6b9670acad799bd1470d40113555f9043413f7218ea43 openssl-devel-1.0.1e-34.el7_0.4.x86_64.rpm 8d806e95985fd72dad37ef401cb098e670595385fc4b6a9a6ad1725cd73c1a29 openssl-libs-1.0.1e-34.el7_0.4.i686.rpm 9ea2a47f988b8bc52d478621d60eb98508383d02bbb483baeefc2c7211df87e9 openssl-libs-1.0.1e-34.el7_0.4.x86_64.rpm 59cee3140e0fb02246a4304df6cb37327c2ac0dc2ec54d2fb02d9b79b9f339d8 openssl-perl-1.0.1e-34.el7_0.4.x86_64.rpm 2b8271ee8702c128d7f5ce3ee044f1960815e67844238880863958e40aab6eb1 openssl-static-1.0.1e-34.el7_0.4.i686.rpm 17982f5f7cc7c0e07370104d1a0662aa534f4328f339413f528520a71e8219ee openssl-static-1.0.1e-34.el7_0.4.x86_64.rpm Source: 4b66e465917405a1bd3c819f58b5835266f1174a65db6b2648926102da44a696 openssl-1.0.1e-34.el7_0.4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Thu, 14 Aug 2014 10:47:05 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:1045 CentOS 7 kdesdk FASTTRACK BugFix Update To: centos-announce(a)centos.org Message-ID: <20140814104705.GA15530(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1045 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1045.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 8bccc9a244ce4eba1cbdfc5fa9256861f6de5dcce600915c101dfcd0c926edc1 kdesdk-4.10.5-6.el7.x86_64.rpm 10373a636202e404b109ab07355f3ab859fd62397f8f9096495bac523bc06ebc kdesdk-cervisia-4.10.5-6.el7.x86_64.rpm 61d22e8a5069b0149bd319add2cf0c81af28826e6c072bb719fcf6fb95706a26 kdesdk-common-4.10.5-6.el7.noarch.rpm ec08ad017dce595c70de5c7ea1f580d094b2f39d208796dd65f85d58a0df9daf kdesdk-devel-4.10.5-6.el7.i686.rpm 1bbf55f4831d787a2c8d3ba4d379fc2e74cea615b1500d25ec7ad38c35c37f44 kdesdk-devel-4.10.5-6.el7.x86_64.rpm d64515673fe725804a2d97685302afedc2b7e92f431d595e288bf60a433d079c kdesdk-dolphin-plugins-4.10.5-6.el7.x86_64.rpm a54005a66c86869c375cf4bee9a58194815c491b4f35b7ffdf51fcedc724f3ba kdesdk-kapptemplate-4.10.5-6.el7.x86_64.rpm 6a3f30408b5765daf78afbc14421275ae460a34096d468416e89171164e73a7f kdesdk-kapptemplate-template-4.10.5-6.el7.noarch.rpm ae6983e79a80b2c1dd2ab4094fb03c0ff826e143479703d5e2f8c69fb4598a98 kdesdk-kcachegrind-4.10.5-6.el7.x86_64.rpm 8eba2433f32fb2c8616477465badd76bd663732f4d95f16bd0a84fbe17a8c129 kdesdk-kioslave-4.10.5-6.el7.x86_64.rpm e8396b0709e7ea7fe0a619c96e59434f1987dd1ace9c6263ad0c1feec86f217d kdesdk-kmtrace-4.10.5-6.el7.x86_64.rpm 84d6e2ee9c25bdcf8a9b4e7e0d204952f6d6a4f31544191ab15e1ef3a453a7e5 kdesdk-kmtrace-devel-4.10.5-6.el7.i686.rpm cadd079a23a068ebfcd8504a372c5f313e0294a69a66e9658e6c8b4d38624733 kdesdk-kmtrace-devel-4.10.5-6.el7.x86_64.rpm 22ff3433398f25783fd0f428adcc210332aa6018dff3301271c757ad79648149 kdesdk-kmtrace-libs-4.10.5-6.el7.i686.rpm c01d90bb5b30cf73ec4c8507fac318a21b54ab36649b9b03734557221033dffa kdesdk-kmtrace-libs-4.10.5-6.el7.x86_64.rpm 2390a5b1af4a154d91b964daf2be8edca6080f1c703df9ba5e480c934377bc83 kdesdk-kompare-4.10.5-6.el7.x86_64.rpm 0eb109235a70eb7e2b83449651f6c4613f62684013cd54f3f6ac68bd1762681f kdesdk-kompare-devel-4.10.5-6.el7.i686.rpm dc6adf6ebf0a2dec4d81906ed2811a8e608d1a3f27fdf0f1ef70ac53a89004ec kdesdk-kompare-devel-4.10.5-6.el7.x86_64.rpm 84bb48489be693ced461dece48d8246b9391f6eb6febd8a66660068fc2ccd389 kdesdk-kompare-libs-4.10.5-6.el7.i686.rpm 7e1403e4de3823450e206b74371ec3d5b2142914a626fc3276310238a3f5a739 kdesdk-kompare-libs-4.10.5-6.el7.x86_64.rpm 4e5c22bd90221b0bdd68c1d36edec942def1e7fd5016de364beea52872a7779e kdesdk-kpartloader-4.10.5-6.el7.x86_64.rpm bed13ddbf7a5c0f3c612234fb0c105505aed96eb64cdf93137c22cd542aeb492 kdesdk-kstartperf-4.10.5-6.el7.x86_64.rpm 69bc82b0baab234b53a65b79a6d0752747d85b8a13a34a00e52b473ec688df8b kdesdk-kuiviewer-4.10.5-6.el7.x86_64.rpm 2f91137813c4f57a7ec11859db5b9ecc045c07a42d609f49cc41ad4d6da0604a kdesdk-lokalize-4.10.5-6.el7.x86_64.rpm 3902ef68b4d1b445313db0a1bcb17380d4480c0ed26c76062236d5d5d45b2c23 kdesdk-okteta-4.10.5-6.el7.x86_64.rpm 365f1b4123d0afad7bbbb39fe10406d60e78bee1fa19081bcdd28c198f15c069 kdesdk-okteta-devel-4.10.5-6.el7.i686.rpm 4e6120852f9feaf0bc03d0dabd937798c419a26d59441c03f20a4a27a2d3b8df kdesdk-okteta-devel-4.10.5-6.el7.x86_64.rpm c6cc0663bf096093ed3eccbbd5a7c6998c16de3938ef7f1eccc3c30059d12f73 kdesdk-okteta-libs-4.10.5-6.el7.i686.rpm 283e46d59093fff62da86119b10c428aa2935aeb3ff6250e7d955db6433b21e8 kdesdk-okteta-libs-4.10.5-6.el7.x86_64.rpm 3a4515b889b3eff55605c98e94d7f8122c7ed1b7b6327da4a2bc03c1aec28c90 kdesdk-poxml-4.10.5-6.el7.x86_64.rpm 367fb9d022c43a0290e9945b7f63ae9e84d02b49a97521ee5bdff363215f1c0c kdesdk-scripts-4.10.5-6.el7.noarch.rpm 28f47e44cd4e366aed24dc59694eb495cb99353e1d833945c000c39e27c4f08a kdesdk-strigi-analyzer-4.10.5-6.el7.x86_64.rpm 15b5a589b2e172df4ba2425ecd25f5a2fe943ac2fbb0b6f6f1027f38f4f98dfd kdesdk-thumbnailers-4.10.5-6.el7.x86_64.rpm e5bb1f850fc9ba80d4c809f15bba02f7d379d4a41dd9875e18b3f5ad4287975b kdesdk-umbrello-4.10.5-6.el7.x86_64.rpm Source: 5fe46a9f0b2c53c50ae1213988e501513a568ef9182bae71ddcf71de1f92889f kdesdk-4.10.5-6.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Thu, 14 Aug 2014 10:47:17 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:1055 CentOS 7 javapackages-tools BugFix Update To: centos-announce(a)centos.org Message-ID: <20140814104717.GA15607(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1055 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1055.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: bbe652a45405fda9613216cb98b79e03f07d535b269cee23dca1967c4625d934 javapackages-tools-3.4.1-6.el7_0.noarch.rpm e7951fffd6c8a7f6546b49ed7337bca3e2a79c0eaf943c72f4231886334a4b4b maven-local-3.4.1-6.el7_0.noarch.rpm c214a8256e8ee1af007656a24d872ffd5c81ade6de156eef7d92bfa3ad17bc99 python-javapackages-3.4.1-6.el7_0.noarch.rpm Source: 95e43e2a26ed03a5aab3d2e4f21e462b798f175a6ac9d2aa8067a9e3eafada14 javapackages-tools-3.4.1-6.el7_0.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 114, Issue 8 ***********************************************

1 0

anaconda, kickstart, lvm over raid, logvol --grow, centos7 mystery
by Borislav Andric 14 Aug '14

14 Aug '14

I am testing some kickstarts on ESXi virtual machine with pair of 16GB disks. Partitioning is lvm over raid. If i am using "logvol --grow i get "ValueError: not enough free space in volume group" Only workaround i can find is to add --maxsize=XXX where XXX is at least 640MB less than available. (10 extents or 320Mb per created logical volume) Following snippet is failing with "DEBUG blivet: failed to set size: 640MB short" part raid.01 --size 512 --asprimary --ondrive=sda part raid.02 --size 1 --asprimary --ondrive=sda --grow part raid.11 --size 512 --asprimary --ondrive=sdb part raid.12 --size 1 --asprimary --ondrive=sdb --grow raid /boot --fstype="xfs" --device="md0" --level=RAID1 raid.01 raid.11 raid pv.01 --fstype="lvmpv" --device="md1" --level=RAID1 raid.02 raid.12 volgroup vg0 pv.01 logvol / --fstype="xfs" --grow --size=4096 --name=lvRoot --vgname=vg0 logvol swap --fstype="swap" --size=2048 --name=lvSwap --vgname=vg0 If i only add --maxsize=13164 everything is working. (but after install i have 640MB in 20 Free PE in vg0, for details see "after --maxsize install") logvol / --fstype="xfs" --grow --size=4096 --name=lvRoot --vgname=vg0 ------changed to -----> logvol / --fstype="xfs" --grow --size=4096 --name=lvRoot --vgname=vg0 --maxsize=13164 Some interesting DEBUG lines : > 15840MB lvmvg vg0 (26) > vg0 size is 15840MB > Adding vg0-lvRoot/4096MB to vg0 > vg vg0 has 11424MB free should it be 11744 or there is 320MB overhead ? > Adding vg0-lvSwap/2048MB to vg0 > vg vg0 has 9056MB free 320MB missing again, total of 640MB > vg vg0: 9056MB free ; lvs: ['lvRoot', 'lvSwap'] nice, i have 9056MB free in vg0 (640MB short but still ... ) > 1 requests and 303 (9696MB) left in chunk > adding 303 (9696MB) to 27 (vg0-lvRoot) wtf, who is counting what !! > failed to set size: 640MB short Could anyone shed some light ? P.S. "after --maxsize install" ========================= If i limit root logvol with --maxsize=13164, after installation i get 640MB of free space (20 Free PE). Missing 640Mb is free according to lvm : [root@c7-pxe-install ~]# pvdisplay --- Physical volume --- PV Name /dev/md1 VG Name vg0 PV Size 15.49 GiB / not usable 22.88 MiB Allocatable yes PE Size 32.00 MiB Total PE 495 >>>>>>>>>>Free PE 20<<<<<<<<<<<< Allocated PE 475 PV UUID uBLBqQ-Tpao-yPVj-1FVA-488x-Bs0K-ebQOmI And i can use it : [root@c7-pxe-install ~]# lvextend -L +640M vg0/lvRoot Extending logical volume lvRoot to 13.47 GiB Logical volume lvRoot successfully resized [root@c7-pxe-install ~]# xfs_growfs / meta-data=/dev/mapper/vg0-lvRoot isize=256 agcount=4, agsize=841728 blks = sectsz=512 attr=2, projid32bit=1 = crc=0 data = bsize=4096 blocks=3366912, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0 ftype=0 log =internal bsize=4096 blocks=2560, version=2 = sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 data blocks changed from 3366912 to 3530752 [root@c7-pxe-install ~]# pvdisplay --- Physical volume --- PV Name /dev/md1 VG Name vg0 PV Size 15.49 GiB / not usable 22.88 MiB Allocatable yes (but full) PE Size 32.00 MiB Total PE 495 Free PE 0 Allocated PE 495 PV UUID uBLBqQ-Tpao-yPVj-1FVA-488x-Bs0K-ebQOmI [root@c7-pxe-install ~]#

2 3

CentOS 7 - Firewall always allows outgoing packets?
by Neil Aggarwal 14 Aug '14

14 Aug '14

Hello all: I am looking at the documentation of the new firewalld service in CentOS 7. It looks like no matter what I configure with it, outgoing connections are still going to be allowed. That does not seem very secure. I always set my servers to default policy of DROP for everything incoming and outgoing and then add rules to allow very specific traffic through. Is this possible using the new firewalld service or should I disable it and go back to using iptables? Thanks, Neil -- Neil Aggarwal, (972) 834-1565 We lend money to investors to buy or refinance single family rent houses. No origination fees, quick approval, no credit check.

19 35

slow i/o with a raid 50 on a 3ware controller
by Chuck Campbell 14 Aug '14

14 Aug '14

I have a raid 50 array on a 3ware controller. The box is running centos 6.5 and the file system is ext4. I'm going to try some other filesystems, but could anyone suggest any alternative raid setups as well as stripe sizes I should try? The old server uses the same controller on a centos 5.10 setup, using ext3, and it performs much faster i/o. The old 3ware setup is raid 5. -chuck -- ACCEL Services, Inc.| Specialists in Gravity, Magnetics | (713)993-0671 ph. | and Integrated Interpretation | (713)993-0608 fax 448 W. 19th St. #325| Since 1992 | (713)306-5794 cell Houston, TX, 77008 | Chuck Campbell | campbell(a)accelinc.com | President & Senior Geoscientist | "Integration means more than having all the maps at the same scale!"

5 5

MySQL - replication - how to restore master?
by John Horne 13 Aug '14

13 Aug '14

Hello, We have MySQL running as a master which is replicating to a single slave server. We are, however, considering what is required when a 'disaster' of some sort happens to either server. By disaster, this could be some event which requires the entire server to be rebuilt, and which would usually include restoring from nightly backups directories such as '/var/lib/mysql' and '/var/log/mysql' (as set in our my.cnf file). It could also refer to an event which only affects the mysql service, but requires us to stop the mysql master service. This may involve reinstalling the mysql package, and, again, restoring the '/var/lib/mysql' and '/var/log/mysql' directories. In the case of losing the slave server, we have found instructions for rebuilding the slave database and restarting replication using a mysqldump backup taken from the master server. We have tested this and it works fine. However, I am having trouble finding out what to do should we lose the master server. Typically mysqldump backups of the master are done overnight, so a failure during the day would mean that the slave is ahead of the master backup. So this poses two questions: 1) If the master fails, and we perform (at that time) a mysqldump of the slave, we could import the data into the master, but what commands do we need to tell the master (and slave?) to start replication based on the imported data? As far as I can gather the master replication data is held in the '/var/log/mysql' directory (in our case) in the bin log files, and these would typically be restored after a disaster. 2) If the master fails and we import the overnight backup data, what commands do we then need to issue on the master and slave to restart replication from the imported data? In particular, on the master do we just delete the bin log files and let replication start afresh? And on the slave, which at that time would be ahead of the master, how do we sort out the replication? Do we drop the existing database and import the backup data into the slave as well, so that both the master and slave start with the same data? Thanks, John. -- John Horne Tel: +44 (0)1752 587287 Plymouth University, UK

3 2

Looking for SElinux help
by Robert Moskowitz 13 Aug '14

13 Aug '14

This is a little OT, but I hope that someone here could help me privately... The challenge is Redsleeve (EL6 for arm) was developed on armv5 and works just fine on armv7 if you have an armv7 kernel, which I do with the Fedora 19 remix. But no working SElinux, primarily because something like no SElinux in the armv5 kernel (little unclear as to why not, but it is not germaine to this problem). I know that my F19 remix has SELinux working. I have tested it. But my RSEL6 is showing SELinux disabled. So if someone has some time and can guide me or point me to some links, I would greatly appreciate it.

1 0

RH developer toolset
by Jerry Geis 13 Aug '14

13 Aug '14

I saw an article this morning about the RH developer toolset. basically it includes a couple of packages like PHP python mysql (etc) that are later packages than that included in the released version like a 6.4 for example. So instead of php 5.3 with patches it would be php 5.4 and so on. That is great for a couple packages - but what about more up to date libraries like glib. 6.4 is way behind on glib. Like a couple years behind. Are there any plans in the "toolset" to update core libraries also? Thanks, Jerry

6 6

Dual boot with 2 drives
by Joseph Hesse 13 Aug '14

13 Aug '14

Hi, I have a laptop with 2 hard drives. The first has Fedora 20 (no windows or anything else) and the second is unused. I would like to install CentOS7 on the unused drive so I can dual boot with the choice of the 2 OS's on the Grub menu. I am comfortable in partitioning drives and installing Linux distributions. I am afraid I may mess up the MBR and/or set up Grub incorrectly so I lose everything. Please point me to some documentation to help me. Thank you, Joe

6 6

CentOS-announce Digest, Vol 114, Issue 7
by centos-announce-request＠centos.org 13 Aug '14

13 Aug '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2014:1048 CentOS 6 hwloc Update (Johnny Hughes) 2. CEEA-2014:1046 CentOS 7 yum-utils Enhancement Update (Johnny Hughes) 3. CEBA-2014:1049 CentOS 7 libreswan BugFix Update (Johnny Hughes) 4. Re: CEBA-2014:1048 CentOS 6 hwloc Update (Karanbir Singh) 5. CEBA-2014:1048 CentOS 6 hwloc Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Tue, 12 Aug 2014 17:36:17 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:1048 CentOS 6 hwloc Update To: centos-announce(a)centos.org Message-ID: <20140812173617.GA58430(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1048 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1048.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a78248940b097ea5231b2c9fa1d5c9697365a869432b392daa4158eb93d5a380 hwloc-1.5-2.el6_5.i686.rpm 1e345b4d6d7bfb257e98cdbbb5f1ebb378fb394299daadf8635c7447e92c4f08 hwloc-devel-1.5-2.el6_5.i686.rpm x86_64: a78248940b097ea5231b2c9fa1d5c9697365a869432b392daa4158eb93d5a380 hwloc-1.5-2.el6_5.i686.rpm 1bb46dd739a3369249442f436ab49e3e0e290d9655a120e318db645ebbe4923d hwloc-1.5-2.el6_5.x86_64.rpm 1e345b4d6d7bfb257e98cdbbb5f1ebb378fb394299daadf8635c7447e92c4f08 hwloc-devel-1.5-2.el6_5.i686.rpm c57299cbfb26225b36aab0ba8913a15380f03606fa3c7fc648ca73d71a35559a hwloc-devel-1.5-2.el6_5.x86_64.rpm Source: 11f31bbd4e7bb2b9c80f0400cd10c1ca29c561eae37d07f1f7e464dedd5f99ad hwloc-1.5-2.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Tue, 12 Aug 2014 19:13:23 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2014:1046 CentOS 7 yum-utils Enhancement Update To: centos-announce(a)centos.org Message-ID: <20140812191323.GA7211(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2014:1046 Upstream details at : https://rhn.redhat.com/errata/RHEA-2014-1046.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: ea7e7baa17dd63572fef201446bb164a518ea38ef95f980f6c3ac38ab778c906 yum-NetworkManager-dispatcher-1.1.31-25.el7_0.noarch.rpm 99e02e21251aae1407b3856d8a463cfd1ad693ba98a2c75660b13fa8fa99f0e7 yum-plugin-aliases-1.1.31-25.el7_0.noarch.rpm 9aa713da4da89c0831d2faaa730ad71e8ee62a61276c95472431822fe77add03 yum-plugin-auto-update-debug-info-1.1.31-25.el7_0.noarch.rpm 676915fa0876f106a0a3f571ea6a8559d94828a5a305eddce0fdf3fce973eb95 yum-plugin-changelog-1.1.31-25.el7_0.noarch.rpm 49a1ce5f7a80c4d31701401dc894b67c6e3ba3d4bf297e78e408212823ac7ae5 yum-plugin-fastestmirror-1.1.31-25.el7_0.noarch.rpm cb8638873b0473ea38d0130089bd3e3301ed60c5b4b71895f11b5ec3e129520a yum-plugin-filter-data-1.1.31-25.el7_0.noarch.rpm 0d7568f4a6db357a69a2d5f015a1d23c38765e28773b7e59e71fe5df8e06f3fb yum-plugin-fs-snapshot-1.1.31-25.el7_0.noarch.rpm 1e43ca04c2f164396e3ae3056172de179a0a7f480ba9e72713bc3966c1a34ca4 yum-plugin-keys-1.1.31-25.el7_0.noarch.rpm d16bcfdc923ee29f6ac37407a2938327ef4aadaff189a48c6a691d9842861f75 yum-plugin-list-data-1.1.31-25.el7_0.noarch.rpm 371f70326a60d3a5b2147afcad36716ed6a779ad48d6142c1e1fbb3985dbd25a yum-plugin-local-1.1.31-25.el7_0.noarch.rpm ab84cccbea5698fccbd35e2a0b5078877cf3b2cd1f50091b7ed0bbd46489ada1 yum-plugin-merge-conf-1.1.31-25.el7_0.noarch.rpm 5d414b6ce2154fbc12a21d2b2abf71f3b8522ca66d8400096147b2d8451f9201 yum-plugin-post-transaction-actions-1.1.31-25.el7_0.noarch.rpm f9fb505035cc0fcde722b0cc61ec04f48a147aea803a6ec4313f799ed7c606a4 yum-plugin-priorities-1.1.31-25.el7_0.noarch.rpm 7ae589ea90b226d29677f54235fed5460ed5b27deabd5d5a79c0c606c3fdc537 yum-plugin-protectbase-1.1.31-25.el7_0.noarch.rpm 6cadbb650c45ff69159b020fa16b94f9b0780fc3473b0f1ae5ece4272e2badc4 yum-plugin-ps-1.1.31-25.el7_0.noarch.rpm b8588f3e50edc34585f67d5b60a2e2eba329bb6df0db9eb92857b1ea5e780ea2 yum-plugin-remove-with-leaves-1.1.31-25.el7_0.noarch.rpm 4ac167cf8b209a46962f3242d9f28c2a1975f4d6e3753478f3b29b529888c2cf yum-plugin-rpm-warm-cache-1.1.31-25.el7_0.noarch.rpm 7f35a162999acdd879a86ac58a1d9bf5e31891464edceda99fedd10655ca17f0 yum-plugin-show-leaves-1.1.31-25.el7_0.noarch.rpm 0103e7faad4000011d966b0e7ff93d98ec45b17fc1b8bd9e777bd4d83877ad4b yum-plugin-tmprepo-1.1.31-25.el7_0.noarch.rpm cd8c5f5461ca935407923cedc994fe68e06b157d606924ddb135010950e0bdf8 yum-plugin-tsflags-1.1.31-25.el7_0.noarch.rpm 56043d6c56a6f3733ba09e59f2274eb3e097e10304e9910c53504d9187282f80 yum-plugin-upgrade-helper-1.1.31-25.el7_0.noarch.rpm 662bd77cb9f2e0e258433d088fa45200922e5a782ef8ca990ecb9179f6b42bff yum-plugin-verify-1.1.31-25.el7_0.noarch.rpm 40555326f77f42bef00e9f2e9898e12ccfb46dd21004cabd1b928207c93cc56b yum-plugin-versionlock-1.1.31-25.el7_0.noarch.rpm bc1e372c809143a73bc7f0922b5a859d7df9947cb31baa5ecc3d30f7763cfa2b yum-updateonboot-1.1.31-25.el7_0.noarch.rpm 2e59d36ee01fdccee0c9d3938c42563e5a60afe6ac0521ca1f9ad1488f06fb53 yum-utils-1.1.31-25.el7_0.noarch.rpm Source: 6ce37a58d98cd5d891b06b60afdd1a2d0d59dc8a0cb51e81ca4237e92d80a412 yum-utils-1.1.31-25.el7_0.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Tue, 12 Aug 2014 19:13:42 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:1049 CentOS 7 libreswan BugFix Update To: centos-announce(a)centos.org Message-ID: <20140812191342.GA7275(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1049 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1049.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 0532466af117b18836183531a61f73b225b2d90c56fca8e6d2f4c320940b2bf4 libreswan-3.8-6.el7_0.x86_64.rpm Source: ac61643e7ccce744fe3e19f898fc935a7667f6a8f2fde0895cdd15db3a3da120 libreswan-3.8-6.el7_0.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Wed, 13 Aug 2014 01:54:22 +0100 From: Karanbir Singh <kbsingh(a)centos.org> Subject: Re: [CentOS-announce] CEBA-2014:1048 CentOS 6 hwloc Update To: centos-announce(a)centos.org Message-ID: <53EAB73E.6010602(a)centos.org> Content-Type: text/plain; charset=ISO-8859-1 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 There was a problem with these packages, and were accidentally shipped unsigned. I've now redone the process and validated, signed rpms are on the mirror network. there is another announcement with the right hash's following this email. On 08/12/2014 06:36 PM, Johnny Hughes wrote: > > CentOS Errata and Bugfix Advisory 2014:1048 > > Upstream details at : > https://rhn.redhat.com/errata/RHBA-2014-1048.html > > The following updated files have been uploaded and are currently > syncing to the mirrors: ( sha256sum Filename ) > > i386: > a78248940b097ea5231b2c9fa1d5c9697365a869432b392daa4158eb93d5a380 > hwloc-1.5-2.el6_5.i686.rpm > 1e345b4d6d7bfb257e98cdbbb5f1ebb378fb394299daadf8635c7447e92c4f08 > hwloc-devel-1.5-2.el6_5.i686.rpm > > x86_64: > a78248940b097ea5231b2c9fa1d5c9697365a869432b392daa4158eb93d5a380 > hwloc-1.5-2.el6_5.i686.rpm > 1bb46dd739a3369249442f436ab49e3e0e290d9655a120e318db645ebbe4923d > hwloc-1.5-2.el6_5.x86_64.rpm > 1e345b4d6d7bfb257e98cdbbb5f1ebb378fb394299daadf8635c7447e92c4f08 > hwloc-devel-1.5-2.el6_5.i686.rpm > c57299cbfb26225b36aab0ba8913a15380f03606fa3c7fc648ca73d71a35559a > hwloc-devel-1.5-2.el6_5.x86_64.rpm > > Source: > 11f31bbd4e7bb2b9c80f0400cd10c1ca29c561eae37d07f1f7e464dedd5f99ad > hwloc-1.5-2.el6_5.src.rpm > > > - -- Karanbir Singh, Project Lead, The CentOS Project +44-207-0999389 | http://www.centos.org/ | twitter.com/CentOS GnuPG Key : http://www.karan.org/publickey.asc -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iQEcBAEBAgAGBQJT6rc+AAoJEI3Oi2Mx7xbt+koH/2D4waLpQuj2+yNIrQWdxZdN cxqDWNpIOFan/OMKg1vewz8f93lh39J+WfwT9bXVTQ7fgN5p80SbB2OWMlP+7/Bw wqXHPtxhgC8nqsjB7EQkEBsJy/YLEPDl79WoE6pP3OAa1O30bO3ElIXoDAgy9Wor HI2JfrF9ohSe7EHRkhsbuspyYDUsRUhDCIL/aZtkXGoH/T5HtfGtIUVQdPIrpaBV 5Ycvv2UYFv5Y6Q8b7x7jLScxITkTU57Q8HxjBZukG0QucOSbdehlNpRJ/RIfcltx QlF/oLUj/rSqTtu9Zc3uxzlyLk6oXfYyyJRb1FasDf5a459TSkfeqMt9ABMgWOY= =smmv -----END PGP SIGNATURE----- ------------------------------ Message: 5 Date: Wed, 13 Aug 2014 00:41:38 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2014:1048 CentOS 6 hwloc Update To: centos-announce(a)centos.org Message-ID: <20140813004138.GA12299(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1048 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1048.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: cd7812109dc993e26fb78f2c722b71788cef869fd26b6d0ecf488f3b82b0103a hwloc-1.5-2.el6_5.i686.rpm 226a86dbd7ee1f86a9feec502a190696163ffc062febb1db7af26da100277fe8 hwloc-devel-1.5-2.el6_5.i686.rpm x86_64: cd7812109dc993e26fb78f2c722b71788cef869fd26b6d0ecf488f3b82b0103a hwloc-1.5-2.el6_5.i686.rpm 9e85302db90408efbc04fc8772716a79d27ab01ffe44f664525121b1393ea6e6 hwloc-1.5-2.el6_5.x86_64.rpm 226a86dbd7ee1f86a9feec502a190696163ffc062febb1db7af26da100277fe8 hwloc-devel-1.5-2.el6_5.i686.rpm 96f6d4d82eab38921c06b3748ffcacea46e668c892b623fdb6227ce7ed6fad2a hwloc-devel-1.5-2.el6_5.x86_64.rpm Source: fdbc2ace293a58aa8e970d7e97336477b0bf20901a9574c066fb5c356ef45289 hwloc-1.5-2.el6_5.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 114, Issue 7 ***********************************************

1 0

Package hwloc-1.5-2.el6_5.x86_64.rpm is not signed
by Leonard den Ottolander 13 Aug '14

13 Aug '14

Package hwloc-1.5-2.el6_5.x86_64.rpm is not signed -- mount -t life -o ro /dev/dna /genetic/research

3 2

Re: [CentOS] CentOS 7 - Firewall always allows outgoing packets?
by Kirk Bocek 12 Aug '14

12 Aug '14

On 8/11/2014 11:56 AM, Reindl Harald wrote: > Am 11.08.2014 um 20:47 schrieb Kirk Bocek: >> I have not even started to digest 7. What is the proper method of >> getting back to an industrial strength firewall under 7? Does one >> disable FirewallD and install iptables or does iptables install on top >> of FirewallD? You are making it sound like FirewallD can act as a >> management tool for iptables > jesus christ if you even not started then do it > > OMG if it's that important I will, I will! What's your malfunction? How about gathering information and knowledge before starting a major upgrade?

2 2

when will docker 1.1.2 for rhel7 be released?
by 彭勇 12 Aug '14

12 Aug '14

there are some bugs in docker-0.11.1-22.el7, when will latest version docker be relased for el7? -- Peng Yong

4 6

CentOS-announce Digest, Vol 114, Issue 6
by centos-announce-request＠centos.org 12 Aug '14

12 Aug '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2014:1030 CentOS 6 plymouth Update (Johnny Hughes) 2. CESA-2014:1038 Low CentOS 6 tomcat6 Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Mon, 11 Aug 2014 18:03:47 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:1030 CentOS 6 plymouth Update To: centos-announce(a)centos.org Message-ID: <20140811180347.GA26908(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1030 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1030.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 7568b606796a506f71743a9ecfcf173289d3c585b05ebbeda42226068fd23794 plymouth-0.8.3-27.el6.centos.1.i686.rpm 973a03c2e84adadbe891d373a58d3af6db377cd0388c655baf90a6d6f2cbf278 plymouth-core-libs-0.8.3-27.el6.centos.1.i686.rpm 056cf72c1481ed70265bf8d5ed75129e51a5d27384fd67c5a555320c0a3161a8 plymouth-devel-0.8.3-27.el6.centos.1.i686.rpm 19d971d21afc18d8ce467adeb9a03b8829056020065058d018dc0cc2a082e2c9 plymouth-gdm-hooks-0.8.3-27.el6.centos.1.i686.rpm 079e877497f68d38daafc9c240be99c3ed8756e8be7ef82d43d2d3211538e962 plymouth-graphics-libs-0.8.3-27.el6.centos.1.i686.rpm dfc10d3faebb5e2bc0824bafbc8379aea11c4bfa7b6272015fe7634de0f9567f plymouth-plugin-fade-throbber-0.8.3-27.el6.centos.1.i686.rpm b2d8841de5ec7113033e46546479ab251a99b22dee8de7ce585bd83e12930564 plymouth-plugin-label-0.8.3-27.el6.centos.1.i686.rpm 6dd6900747a71950ce1a6b940691f0b47127c2eff9d221c4d9e90425d1bee013 plymouth-plugin-script-0.8.3-27.el6.centos.1.i686.rpm ca60a9792a080d2a9e5ef3c7c868bdb116c5f8224009ca81408b6a357a4c1b97 plymouth-plugin-space-flares-0.8.3-27.el6.centos.1.i686.rpm 9cdaec4c9fde656de0abcef8ffee1eb5e4a1ecabd0e43858da89577857b18332 plymouth-plugin-throbgress-0.8.3-27.el6.centos.1.i686.rpm 0b966d04bf4bb40d43c4cfee210c3a64393bd6dd3cd253eb935d9214f081575a plymouth-plugin-two-step-0.8.3-27.el6.centos.1.i686.rpm 3a5317b38367ed63b8826d98549e65afdd2d8f86857cf9c3ecf7d88835bfd59d plymouth-scripts-0.8.3-27.el6.centos.1.i686.rpm 5ba143327bf4a936ce4376dba0db8990b3777e8eafaf29764c9056972e7595a6 plymouth-system-theme-0.8.3-27.el6.centos.1.noarch.rpm 0f2bb0fb73a08df09fbb69e3d0d00d3a0ed5622639d4f7b161c32435e0491ed0 plymouth-theme-fade-in-0.8.3-27.el6.centos.1.noarch.rpm d85c60009cf61d2275248488f3ed3b5b8d7f9839c9199764c2a73caf3f25d66b plymouth-theme-rings-0.8.3-27.el6.centos.1.noarch.rpm 147a72348c9a4ac228229c204105234ec6025096c57efd00f16b7442e11e1365 plymouth-theme-script-0.8.3-27.el6.centos.1.noarch.rpm 893d5878d4185af0adaa26a5b7b464cd1fb086329f945b04f46656e699e4fa35 plymouth-theme-solar-0.8.3-27.el6.centos.1.noarch.rpm cdd4244ea66efe5b504a8d8eb46f0cedc68917e3297807db505511c79f886e54 plymouth-theme-spinfinity-0.8.3-27.el6.centos.1.noarch.rpm c2e504cce74b5fa0f8ad020047483eb1f683bba3bdb384f3ca3971dde86c2cc6 plymouth-utils-0.8.3-27.el6.centos.1.i686.rpm x86_64: 7c256cc4b5e2f17ab04c62ba30e3835aa99c81756408c02dae9d20f6232d0fd8 plymouth-0.8.3-27.el6.centos.1.x86_64.rpm 973a03c2e84adadbe891d373a58d3af6db377cd0388c655baf90a6d6f2cbf278 plymouth-core-libs-0.8.3-27.el6.centos.1.i686.rpm a7450913b1b5a398447e555b29df5e38b89ebee7c7451b2962672c486351166c plymouth-core-libs-0.8.3-27.el6.centos.1.x86_64.rpm 056cf72c1481ed70265bf8d5ed75129e51a5d27384fd67c5a555320c0a3161a8 plymouth-devel-0.8.3-27.el6.centos.1.i686.rpm b484c1dde3979bb6a21953cc2bdf555bfaa7346af6eee647808d9e76ee7470a4 plymouth-devel-0.8.3-27.el6.centos.1.x86_64.rpm 08e458127bf25f8ed130320e9e276e5df8666334d41ace5284e29d4d941b0a35 plymouth-gdm-hooks-0.8.3-27.el6.centos.1.x86_64.rpm 079e877497f68d38daafc9c240be99c3ed8756e8be7ef82d43d2d3211538e962 plymouth-graphics-libs-0.8.3-27.el6.centos.1.i686.rpm 13ed3f9b216d9d04ac6df7570d9ea21aeae62351359893a2512b9787bc7b5154 plymouth-graphics-libs-0.8.3-27.el6.centos.1.x86_64.rpm d718c13d0b834b4107c325e6c4e5e6c648a072e80bce9b49aca014643369739e plymouth-plugin-fade-throbber-0.8.3-27.el6.centos.1.x86_64.rpm e9795e79cde9a0375706982ac06972e8c2535a275a3b035f2f1694f4a391e2c2 plymouth-plugin-label-0.8.3-27.el6.centos.1.x86_64.rpm 45dcc256e14833d101fc13e6cef9045de7e29b18ec4158e107832769b711297f plymouth-plugin-script-0.8.3-27.el6.centos.1.x86_64.rpm cc4181a2217c37f3ba9f8ad813eb3e06533609ffcaf63a0871c603a2cb90b476 plymouth-plugin-space-flares-0.8.3-27.el6.centos.1.x86_64.rpm 8008278dc1aaf03b18c114af99e79626f4bc2010fb9f78bce79f0f83850713fe plymouth-plugin-throbgress-0.8.3-27.el6.centos.1.x86_64.rpm 03775d60bc2f9b28b21c17c1f3bff0d5a7d59b2bf1e277f97f783be484da1ff1 plymouth-plugin-two-step-0.8.3-27.el6.centos.1.x86_64.rpm 7257b7b4f8c9dff4503558fe792d3498c38756b4abc379a4849eba99e396cbe5 plymouth-scripts-0.8.3-27.el6.centos.1.x86_64.rpm 5ba143327bf4a936ce4376dba0db8990b3777e8eafaf29764c9056972e7595a6 plymouth-system-theme-0.8.3-27.el6.centos.1.noarch.rpm 0f2bb0fb73a08df09fbb69e3d0d00d3a0ed5622639d4f7b161c32435e0491ed0 plymouth-theme-fade-in-0.8.3-27.el6.centos.1.noarch.rpm d85c60009cf61d2275248488f3ed3b5b8d7f9839c9199764c2a73caf3f25d66b plymouth-theme-rings-0.8.3-27.el6.centos.1.noarch.rpm 147a72348c9a4ac228229c204105234ec6025096c57efd00f16b7442e11e1365 plymouth-theme-script-0.8.3-27.el6.centos.1.noarch.rpm 893d5878d4185af0adaa26a5b7b464cd1fb086329f945b04f46656e699e4fa35 plymouth-theme-solar-0.8.3-27.el6.centos.1.noarch.rpm cdd4244ea66efe5b504a8d8eb46f0cedc68917e3297807db505511c79f886e54 plymouth-theme-spinfinity-0.8.3-27.el6.centos.1.noarch.rpm 4307b4770d4b303db08f59e19c887dd1e78f466f25689e765084e7242d38af93 plymouth-utils-0.8.3-27.el6.centos.1.x86_64.rpm Source: 9a9b9f18d8fe1ed32e5b4ba45c8f94fc404c3ce923aed7acf0e290039df0fb49 plymouth-0.8.3-27.el6.centos.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Mon, 11 Aug 2014 18:04:13 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:1038 Low CentOS 6 tomcat6 Update To: centos-announce(a)centos.org Message-ID: <20140811180413.GA27068(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:1038 Low Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-1038.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 1a750df6098a2ce54515a0a38da8612bc822bb52f3a16edd5480f6366b89dd54 tomcat6-6.0.24-78.el6_5.noarch.rpm 77c388da7d14541c820067b47a9c9fbe26ce876dd7d90e78069d7813318ae25b tomcat6-admin-webapps-6.0.24-78.el6_5.noarch.rpm 10d9e84e92759d73b594fc8805932ba1bd94ded7eefc57f1c2929eeb3af57183 tomcat6-docs-webapp-6.0.24-78.el6_5.noarch.rpm bd46526fdde56d117d96e223c3e1ebcda7ae378e26b70c4359900c82597eb5d4 tomcat6-el-2.1-api-6.0.24-78.el6_5.noarch.rpm 7a4a76572ddbda584f13ea26b27dbfac86252a1fcc0b1639f4169705bbcaf1dc tomcat6-javadoc-6.0.24-78.el6_5.noarch.rpm b8c505e5ea4cb9449190bad7be00c2c8ab9b1b1c0643e7f47aa5c42ec5df0f6a tomcat6-jsp-2.1-api-6.0.24-78.el6_5.noarch.rpm 803ddf28841c6063555a6cebb79ec36063d7c3d8634e10b2b54d7cbbdf7437fb tomcat6-lib-6.0.24-78.el6_5.noarch.rpm 59d800ddc41602b696c852a8e98b3030f56a9a5cf2f7d869d54a7bdd8fd5d4ac tomcat6-servlet-2.5-api-6.0.24-78.el6_5.noarch.rpm 2b6c3e6888cb9927547c47dee1a8032618b673729a8fe3ee7ce8eade88d1e643 tomcat6-webapps-6.0.24-78.el6_5.noarch.rpm x86_64: 1a750df6098a2ce54515a0a38da8612bc822bb52f3a16edd5480f6366b89dd54 tomcat6-6.0.24-78.el6_5.noarch.rpm 77c388da7d14541c820067b47a9c9fbe26ce876dd7d90e78069d7813318ae25b tomcat6-admin-webapps-6.0.24-78.el6_5.noarch.rpm 10d9e84e92759d73b594fc8805932ba1bd94ded7eefc57f1c2929eeb3af57183 tomcat6-docs-webapp-6.0.24-78.el6_5.noarch.rpm bd46526fdde56d117d96e223c3e1ebcda7ae378e26b70c4359900c82597eb5d4 tomcat6-el-2.1-api-6.0.24-78.el6_5.noarch.rpm 7a4a76572ddbda584f13ea26b27dbfac86252a1fcc0b1639f4169705bbcaf1dc tomcat6-javadoc-6.0.24-78.el6_5.noarch.rpm b8c505e5ea4cb9449190bad7be00c2c8ab9b1b1c0643e7f47aa5c42ec5df0f6a tomcat6-jsp-2.1-api-6.0.24-78.el6_5.noarch.rpm 803ddf28841c6063555a6cebb79ec36063d7c3d8634e10b2b54d7cbbdf7437fb tomcat6-lib-6.0.24-78.el6_5.noarch.rpm 59d800ddc41602b696c852a8e98b3030f56a9a5cf2f7d869d54a7bdd8fd5d4ac tomcat6-servlet-2.5-api-6.0.24-78.el6_5.noarch.rpm 2b6c3e6888cb9927547c47dee1a8032618b673729a8fe3ee7ce8eade88d1e643 tomcat6-webapps-6.0.24-78.el6_5.noarch.rpm Source: a1240c7c750144e466f26d5ea1db995489aa43cef9ec104632be73af687fc118 tomcat6-6.0.24-78.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 114, Issue 6 ***********************************************

1 0

Re: [CentOS] Use postfix and spamd on CentOS 6 - looking for a shortest guide
by Adam King 12 Aug '14

12 Aug '14

Thanks :) Adam King IT Systems Administrator Skipton Girls High School 01756 707600 www.sghs.org.uk ----- Original Message ----- From: "Reindl Harald" <h.reindl(a)thelounge.net> To: "CentOS mailing list" <centos(a)centos.org>, kinga(a)sghs.org.uk Sent: Monday, 11 August, 2014 5:55:22 PM Subject: Re: [CentOS] Use postfix and spamd on CentOS 6 - looking for a shortest guide Am 11.08.2014 um 18:43 schrieb Adam King: > Can you explain why you'd use milter over spamassassin? Genuinely interested as we could certainly get better spam filtering... just becaus eit is the only way where you can *block and reject* spam instead still deliver it with a special subject http://www.postfix.org/MILTER_README.html without a milter your only choices are: * deliver crap * get a backscatter and get blacklisted * drop messages while pretend you accepted them and go to jail "-r 6" = reject with a score of 6 and bigger spamass-milter -p /run/spamass-milter/spamass-milter.sock -g sa-milt -r 6 > ----- Original Message ----- > From: "Alexander Dalloz" <ad+lists(a)uni-x.org> > To: "CentOS mailing list" <centos(a)centos.org> > Sent: Monday, 11 August, 2014 5:01:16 PM > Subject: Re: [CentOS] Use postfix and spamd on CentOS 6 - looking for a shortest guide > > Am 2014-08-11 13:38, schrieb Alexander Farber: >> Hello fellow CentOS-users, >> >> on the net there are lots of Spamassassin related HOWTOs - describing >> how >> to create a shell script for Postfix and how to install Spamassassin >> and >> start its spamd daemon - step by step. Additionally antivirus setups >> are >> described... >> >> But I have a strong feeling, that this is unneeded on CentOS 6 - >> because >> there are already preconfigured stock packages for postfix and >> spamassassin. >> >> So I have installed the both packages and I have configured postfix (it >> works fine). >> >> Also I have started the spamd (and can see it in "ps uawx") with: >> >> # chkconfig spamassassin on >> # service spamassassin start >> >> So I'm just missing the connection between postfix and spamd. >> >> Could anybody using these 2 programs on CentOS 6 please share it with >> me? > > [ ... ] > > Do yourself a favour and use a milter instead of piping each single mail > through spamassassin. > > http://pkgs.org/centos-6/epel-x86_64/spamass-milter-0.3.2-3.el6.x86_64.rpm.… > > Then add something like > > smtpd_milters = unix:/var/run/spamass-milter/postfix/sock > inet:127.0.0.1:8891 > non_smtpd_milters = $smtpd_milters > milter_default_action = accept > > to your Postfix' main.cf and configure the milter flags in > /etc/sysconfig/spamass-milter

4 3

Question about dump on MySQL
by Rodrigo Pichiñual Norin 11 Aug '14

11 Aug '14

I need export an registers of a data base from command line. It is possible with mysqldump? for example: mysqldump -u user -ppass db "select *from users where id=20" ??? thank

4 4

Centos 6 : ClamAV out-of-date ???
by Always Learning 11 Aug '14

11 Aug '14

On one Centos 6.5 server, but not on other C 6.5 servers, Logwatch daily tells me:- Last Status: WARNING: Your ClamAV installation is OUTDATED! WARNING: Local version: 0.98.3 Recommended version: 0.98.4 ---------------- : freshclam -V ClamAV 0.98.4/19275/Sun Aug 10 17:26:35 2014 : clamd -V ClamAV 0.98.4/19275/Sun Aug 10 17:26:35 2014 : rpm -qa clam\* clamd-0.98.4-1.el6.rf.x86_64 clamav-db-0.98.4-1.el6.rf.x86_64 clamav-0.98.4-1.el6.rf.x86_64 I am puzzled and wonder how I can resolve this minor irritation. -- Regards, Paul. England, EU. Centos, Exim, Apache, Libre Office. Linux is the future. Micro$oft is the past.

3 4

Re: [CentOS] Centos 6 : ClamAV out-of-date ???
by Always Learning 11 Aug '14

11 Aug '14

On Mon, 2014-08-11 at 11:37 +0000, Richard wrote: > > From: Always Learning <centos(a)u62.u22.net> > > Last Status: > > WARNING: Your ClamAV installation is OUTDATED! > > WARNING: Local version: 0.98.3 Recommended version: 0.98.4 > > > > : freshclam -V > > ClamAV 0.98.4/19275/Sun Aug 10 17:26:35 2014 > > > > : clamd -V > > ClamAV 0.98.4/19275/Sun Aug 10 17:26:35 2014 > > > > : rpm -qa clam\* > > clamd-0.98.4-1.el6.rf.x86_64 > > clamav-db-0.98.4-1.el6.rf.x86_64 > > clamav-0.98.4-1.el6.rf.x86_64 > Make certain that your freshclam process has been restarted since > being updated. In some environments freshclam runs from a cron.daily > script, but it can also be set up to run as a "daemon" (I start mine > with an @reboot crontab entry, but it is sometimes in rc.local). In > the "daemon" case you have to explicitly stop and restart it as the > rpm update process doesn't handle that. Thank you. Your advice solved the riddle. : ps -A|grep fresh showed Freshclam was running. Killed it. Stopped and restarted clamd. : logwatch --range today shows the problem has been resolved. Freshclam updates are run by CRON. Many thanks Richard. -- Regards, Paul. England, EU. Centos, Exim, Apache, Libre Office. Linux is the future. Micro$oft is the past.

1 0

yum-cron email notification doesn't appear
by 1th＠setevoy.kiev.ua 11 Aug '14

11 Aug '14

Hi. I'm installed yum-cron and set: # by default MAILTO is unset, so crond mails the output by itself # example: MAILTO=root MAILTO="root(a)domain.org.ua" I see in log that yum-cron done it's job: # grep "yum" /var/log/cron Aug 11 03:08:02 venti run-parts(/etc/cron.daily)[4516]: starting 0yum.cron Aug 11 03:49:30 venti run-parts(/etc/cron.daily)[4761]: finished 0yum.cron And I see that packages really updated, but - I don't see email notifications in my mail box... I got notification from spamd, for example, but nothing from yum-cron. How can i find it in maillog? Some text from 'Subject'? # grep "yum" /var/log/maillog Doesn't give result. Or - some other way to check? Thanks for tips.

2 1

Centos 7 - iptables service failed to start
by Neil Aggarwal 11 Aug '14

11 Aug '14

Hello all: I did a fresh install of CentOS 7 on a new machine. I wrote /usr/local/bin/firewall.stop to remove all the firewall rules. It contains this code: # Flush the rules /usr/sbin/iptables -F # Set the default policies to accept /usr/sbin/iptables -P INPUT ACCEPT /usr/sbin/iptables -P OUTPUT ACCEPT /usr/sbin/iptables -P FORWARD ACCEPT I wrote /usr/local/bin/firewall.start to set the firewall rules. It contains this code: # IP definitions ETH0_IP=a.b.c.d # Load the FTP conntrak module /usr/sbin/modprobe nf_conntrack_ftp # Set the default policies to drop all packets /usr/sbin/iptables -P INPUT DROP /usr/sbin/iptables -P OUTPUT DROP /usr/sbin/iptables -P FORWARD DROP # Flush any existing rules /usr/sbin/iptables -F # Allow loopback traffic /usr/sbin/iptables -A INPUT -i lo -j ACCEPT /usr/sbin/iptables -A OUTPUT -o lo -j ACCEPT # Allow icmp protocol packets /usr/sbin/iptables -A INPUT -i eth0 -d $ETH0_IP -p icmp -j ACCEPT /usr/sbin/iptables -A OUTPUT -o eth0 -s $ETH0_IP -p icmp -j ACCEPT [ Additional allow rules here ] If I run the firewall.start script manually, it sets the iptables rules correctly. If I run the firewall.stop script manually, it removes the iptables rules correctly. The problem comes in when I am trying to execute this from systemd. I wrote /etc/systemd/system/firewall.service with this content: [Unit] Description=Iptables firewall Before=network.target Wants=network.target [Service] Type=oneshot ExecStart=/usr/local/bin/firewall.start ExecStop=/usr/local/bin/firewall.stop RemainAfterExit=yes [Install] WantedBy=multi-user.target Now, when I run systemctl start firewall.service, I get this output: Job for firewall.service failed. See 'systemctl status firewall.service' and 'journalctl -xn' for details. If I do systemctl status firewall.status, it gives me: firewall.status.service Loaded: not-found (Reason: No such file or directory) Active: inactive (dead) journalctl -xn gives me this output: Aug 10 06:09:38 jamm23.jammconsulting.com systemd[1]: Starting Iptables firewall... -- Subject: Unit firewall.service has begun with start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit firewall.service has begun starting up. Aug 10 06:09:38 jamm23.jammconsulting.com systemd[2268]: Failed at step EXEC spawning /usr/local/bin/firewall.start: Exec format error -- Subject: Process /usr/local/bin/firewall.start could not be executed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- The process /usr/local/bin/firewall.start could not be executed and failed. -- -- The error number returned while executing this process is 8. Aug 10 06:09:38 jamm23.jammconsulting.com systemd[1]: firewall.service: main process exited, code=exited, status=203/EXEC Aug 10 06:09:38 jamm23.jammconsulting.com systemd[1]: Failed to start Iptables firewall. -- Subject: Unit firewall.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit firewall.service has failed. -- -- The result is failed. Aug 10 06:09:38 jamm23.jammconsulting.com systemd[1]: Unit firewall.service entered failed state. Any ideas what is happening here? Thanks, Neil -- Neil Aggarwal, (972) 834-1565 We lend money to investors to buy or refinance single family rent houses. No origination fees, quick approval, no credit check.

4 4

v7 - /dev/shm mount options
by Markus Falb 10 Aug '14

10 Aug '14

Hi, There is no entry in fstab any more. Where can I change the mount options of /dev/shm in v7? -- Kind Regards, Markus Falb

1 0

CentOS 6.5 printer weirdness...
by Robert Heller 10 Aug '14

10 Aug '14

Ok, it is consistent and repeatable: *Everytime* I do a routine 'yum update' on the CentOS 6.5 server (64-bit) the printers (both of them networked laser printers, one an [old] HP Laserjet 4200 and one a [new] Brother MFC-9970CDW), cups loses the ability to print (its filter chain becomes broken). According to the CUPS mailing list, this error is 'never' because of of problem with cups, but always with the 'underlying operating system' -- eg the 'underlying operating system' has messed with the filters CUPS uses for the printers. So is this a *known* problem? Or is there something Redhat has done to the distributed cups RPM (or is it something the CentOS developers have done to the Redhat source rpm)? I noticed that the update I just did included an updated cups RPM. The *appearent* cure (workaround?) is to delete the printers, and re-install them. Has anyone else had this problem? -- Robert Heller -- 978-544-6933 Deepwoods Software -- Custom Software Services http://www.deepsoft.com/ -- Linux Administration Services heller(a)deepsoft.com -- Webhosting Services

5 4

centos 7 iscsi saveconfig doesn't
by me＠tdiehl.org 08 Aug '14

08 Aug '14

Hi, I am working to get iscsi running using targetcli. So far everything seems to be working except for the fact that when I run saveconfig, exit the targetcli shell and reboot, the iscsi configs are gone. If I run restoreconfig, the configuration gets reloaded and all is well. Can someone tell me how to get the targetcli configuration to persist through a reboot? Regards, -- Tom me(a)tdiehl.org Spamtrap address me123(a)tdiehl.org

1 0

Per process memory monitoring tool
by przemolicc＠poczta.fm 08 Aug '14

08 Aug '14

Hi all, I am looking for a tool which let me monitor memory consumption per process on CentOS 5/6. The tool should be able to save its history so I could see what amount of memory was consumed yesterday/week ago/etc by each process. Can you recommend anything like that ? Best regards P.

4 3

CentOS-announce Digest, Vol 114, Issue 5
by centos-announce-request＠centos.org 08 Aug '14

08 Aug '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2014:1029 CentOS 7 iw FASTTRACK BugFix Update (Johnny Hughes) 2. CESA-2014:1031 Important CentOS 6 389-ds-base Update (Johnny Hughes) 3. CESA-2014:1034 Low CentOS 7 tomcat Security Update (Johnny Hughes) 4. CESA-2014:1031 Important CentOS 7 389-ds-base Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 7 Aug 2014 13:36:05 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:1029 CentOS 7 iw FASTTRACK BugFix Update To: centos-announce(a)centos.org Message-ID: <20140807133605.GA54414(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1029 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1029.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: f415d3067a6526104536cf9b4e00cce18b0bbd2792caab51cd94cb08bb3da22f iw-3.10-6.el7.x86_64.rpm Source: dfe3180a04390035fdaf19b6fe269d0a9ec82070ce8d358a6dd8c5ab25335424 iw-3.10-6.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Thu, 7 Aug 2014 18:28:00 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:1031 Important CentOS 6 389-ds-base Update To: centos-announce(a)centos.org Message-ID: <20140807182800.GA59235(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:1031 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-1031.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 61ffc041abb4154279202b85294e858f56067ae1b4bfc7e1885df971b51fd602 389-ds-base-1.2.11.15-34.el6_5.i686.rpm d9118bd5605bda42be7968d4eae480f14f66d542d5e932814a42a9bfd37b19a7 389-ds-base-devel-1.2.11.15-34.el6_5.i686.rpm b1c8f62674be123500881fbecead7c8757a46139ff8e253dbfbe978c770fe8bf 389-ds-base-libs-1.2.11.15-34.el6_5.i686.rpm x86_64: 528df6340d14b0b8f36ca034efae360d052e157ec611c515c94d2c023b9b9603 389-ds-base-1.2.11.15-34.el6_5.x86_64.rpm d9118bd5605bda42be7968d4eae480f14f66d542d5e932814a42a9bfd37b19a7 389-ds-base-devel-1.2.11.15-34.el6_5.i686.rpm 76efb37b14dfa1aed34458e7e995274c075a2955cd4c94bbb7a5e076a008b3ab 389-ds-base-devel-1.2.11.15-34.el6_5.x86_64.rpm b1c8f62674be123500881fbecead7c8757a46139ff8e253dbfbe978c770fe8bf 389-ds-base-libs-1.2.11.15-34.el6_5.i686.rpm ee0a3f0b751e15b73178a8873c2e9968da820b43d0bc734878cd0c26fce1252b 389-ds-base-libs-1.2.11.15-34.el6_5.x86_64.rpm Source: bfbc716525d9eded6c1eb16309c02e41c23e23eb988a7c8b0dbdadbb5a5895b1 389-ds-base-1.2.11.15-34.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Thu, 7 Aug 2014 18:48:52 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:1034 Low CentOS 7 tomcat Security Update To: centos-announce(a)centos.org Message-ID: <20140807184852.GA6350(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:1034 Low Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-1034.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 46154503a0a9df3132177e14d0a3484952fe0839897069d349702f00f9918cfe tomcat-7.0.42-8.el7_0.noarch.rpm 3d9aef338c6f9fa247015e5c8008d7db1400a2906b409d06c859de4e1d2db418 tomcat-admin-webapps-7.0.42-8.el7_0.noarch.rpm 335f38ba69adbc15234e36f8d0f5b033cc192c02d78578f388d498f48b69942f tomcat-docs-webapp-7.0.42-8.el7_0.noarch.rpm ec29adfb033c31ca1b2e98f5e98ebb059a3d2717053f647c7366d22a39a32e55 tomcat-el-2.2-api-7.0.42-8.el7_0.noarch.rpm 7d1dc4c194c152812791f2547161111413bafb16ab50b6391800d752cf9efcb1 tomcat-javadoc-7.0.42-8.el7_0.noarch.rpm 75e275beca6dc7526a7fe165f25fc1c0f7360ba9dc50d5a9aecd7fb7aa69f0e6 tomcat-jsp-2.2-api-7.0.42-8.el7_0.noarch.rpm 136ccb6595709db15a8e79e5d61dfeab33c9d5f2e453a756fddfa952f2853e32 tomcat-jsvc-7.0.42-8.el7_0.noarch.rpm c94de7be252443eae38df3d0879665cdf1a6069ceea657ed54d42e6ba65cbed3 tomcat-lib-7.0.42-8.el7_0.noarch.rpm be0eeb73e6762be951ae949737174773710b0842cb405a482ee8cd204604f6c3 tomcat-servlet-3.0-api-7.0.42-8.el7_0.noarch.rpm a74ede810bb7db21964318da5a1a9e3b8930808e474e175e7bd76920ec97b89d tomcat-webapps-7.0.42-8.el7_0.noarch.rpm Source: d782337aa88bce7875c4eed4eee2cf512dbd6ab744e73e72f638af8450747433 tomcat-7.0.42-8.el7_0.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Thu, 7 Aug 2014 18:49:03 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:1031 Important CentOS 7 389-ds-base Security Update To: centos-announce(a)centos.org Message-ID: <20140807184903.GA6424(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:1031 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-1031.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 3dcfcdd848c268154b28a0af59848e8572a9854e8d9e5d5c20602a62cbc77953 389-ds-base-1.3.1.6-26.el7_0.x86_64.rpm d4c59636da3dd01e6d9500f1b768b602b75f1d215364955e33cedcabdaac56af 389-ds-base-devel-1.3.1.6-26.el7_0.x86_64.rpm 9461ddc7aec184cf6ec613a6460b41fb8d5a10b86f3aeae6dde72a16ef73b8f2 389-ds-base-libs-1.3.1.6-26.el7_0.x86_64.rpm Source: 33b1a4c95079f21fe391fbab8597e0f89874a18bba56d8be4e63a82ed33eccea 389-ds-base-1.3.1.6-26.el7_0.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 114, Issue 5 ***********************************************

1 0

sssd and authconfig and ldap database lookups
by Mauricio Tavares 07 Aug '14

07 Aug '14

So I am feeling rather frustrated with sssd today: 1. I see that when you install sssd (this is centos 6), sssd.conf is not created. https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/ht… implies that if I want to use sssd I need to create the sssd.conf file first. Any reason why? 2. I also noticed if sssd.conf is not there, authconfig won't create it even if you tell it to --enablesssd. How so? I thought that if you are using sssd, it would have stuff like kerberos and ldap (to pick a couple of examples) configured there. 3. It seems if I want to, say, define ldap_user_search_base I must do it directly in sssd.conf instead of passing some kind of argument to authconfig. Am I correct? If so, which files does authconfig affect? I thought it was the *proper* way to configure all the authentication thingies so to make sure they all played together. But, it seems that you have to configure sssd.conf and then use authconfig... or not. Brain hurts

4 6

KVM in CentOS 5?
by Marko Vojinovic 07 Aug '14

07 Aug '14

Hi folks, I've been trying to do some KVM virtualization on a C5 host, and to my surprise, there seems to be no kvm package in any of the repos. Yum install kvm says: No package kvm available. Nothing to do This machine is a CentOS release 5.10 (Final) with the 2.6.18-371.11.1.el5 kernel. Also, the docs related to C5 on http://wiki.centos.org/HowTos/KVM seem to be terribly outdated. What am I missing here? TIA, :-) Marko

5 10

rsyslog does not log on a separate partition/FS mounted on /var/log/
by Arun Khan 07 Aug '14

07 Aug '14

The system is an AWS Instance based on a community CentOS 6.4 AMI snapshot. The vdisk is as follows as shown below [1] The root LVM contains /var/log/ I have attached another block device with ext4 FS. I copied the files from /var/log to this device (mounted on /mnt) and then changed /etc/fstab to mount this device on /var/log on boot. However, I do not see anything being logged in /var/log/messages. To test the logging, I used the 'logger' command to log some string; nothing appears in /var/log/messages. 'service rsyslog status' reports the daemon is running. When I stop rsyslog, umount the /var/log device and then restart rsyslog, I can see that logs are being recorded in /var/log/messages. Using the 'logger' command I can see messages written in /var/log/messages. man pages of ryslog.conf and rsyslogd show nothing related to logs being on a separate device Any pointers to fix the problem would be much appreciated. [1] Disk /dev/xvda: 8589 MB, 8589934592 bytes Device Boot Start End Blocks Id System /dev/xvda1 * 1 64 512000 83 Linux /dev/xvda2 64 1045 7875584 8e Linux LVM Disk /dev/mapper/VolGroup-lv_root: 7205 MB, 7205814272 bytes Disk /dev/mapper/VolGroup-lv_swap: 855 MB, 855638016 bytes -- Arun Khan

6 8

CentOS 6 - Lost Console Login
by Kirk Bocek 07 Aug '14

07 Aug '14

Just had a problem with CentOS 6.5 x86_64 after the last kernel upgrade. It looks like the boot sector got hosed somehow and the system was unbootable. I was able to fix it with a boot to an install image USB and running grub-install. System is now bootable. However, I've lost the system console. No login prompt is provided at the console. The system boots and is remotely accessible. Services seem just fine. I don't see any error messages after booting, either dmesg or /var/log/messages. Can anyone tell me what packages provide console login so I can try a reinstall. Thanks.

2 7

Centos7 - Terminal not blanking
by david 07 Aug '14

07 Aug '14

Folks Apparently "new" in Centos 7 is that the terminal screen does not blank after a period of time. This is a server configuration, and no GUI is involved. Is there some magic setting I need to tweek? Thanks in advance David

3 3

Centos 6.5 em1 network can not up????
by mcclnx mcc 07 Aug '14

07 Aug '14

We just got DELL R920 and installed Centos 6.5 on it. After installation, network not function. We manually enter IP address, gateway and netmark on "em1". we also do following: 1. startup NetworkManager 2. /etc/sysconfig/network-scripts/ifcfg-em1 ==> NM_CONTROOLED=yes I tried to startup network and get error message: Bring up interface em1: connection activation failed Device not managed by NetworkManager or unavailable. Any ideal? Thanks.

3 2

kickstart - dont wipe data
by Markus Falb 07 Aug '14

07 Aug '14

Hi, I am struggling with kickstart. What I want to achieve is a reinstall, but some data partitions should survive the install, i.e. they should not be formatted. With a single disk this works, here is the relevant part from the kickstart file (I shortened the name of the volume group) ... zerombr clearpart --none --initlabel part /boot --fstype="xfs" --label=boot --onpart=vda1 part pv.00 --fstype="lvmpv" --onpart=vda2 --noformat volgroup v --noformat logvol / --fstype=xfs --name=wurzel --vgname=v --useexisting logvol /home --fstype=ext4 --name=home --vgname=v --noformat ... you see, / will be reformatted, /boot will be reformatted, but /home will not. Now a machine with md raid 1. I tried the following. ... #zerombr #clearpart --none --initlabel part raid.01 --onpart vda1 --noformat part raid.02 --onpart vdb1 --noformat raid /boot --fstype xfs --label boot --level 1 --device md0 --noformat part raid.11 --onpart vda2 --noformat part raid.12 --onpart vdb2 --noformat raid pv.00 --level 1 --device md1 --noformat volgroup v --noformat logvol / --fstype=xfs --name=wurzel --vgname=v --useexisting logvol /home --fstype=ext4 --name=home --vgname=v --noformat ... But I get ... 02:54:21,069 ERR anaconda: storage configuration failed: The following problem occurred on line 6 of the kickstart file: No preexisting RAID device with the name "0" was found. ... What is wrong? I really want preserve data and only wipe system. -- Kind Regards, Markus Falb

2 2

idle timeout on Centos6
by Johan Vermeulen 07 Aug '14

07 Aug '14

Dear All, I'm using Centos6 with Gnome Desktops. As far as I can tell the default idle timeout is 5 minutes. I try to set this to 15 minutes with this command: gconftool-2 --direct --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory --type int --set /apps/gnome-screensaver/idle_delay 15 This doesn't change the value in System-Preferences-Screensaver. And when timing the idle-timeout, it's still 5 minutes. Opening gconf-editor, I cannot find the standard 5 minutes, the standard here is 10 minutes under /apps/gnome-screensaver/idle_delay What am I doing wrong? Greetings, J. -- Johan Vermeulen IT-medewerker Caw De Kempen johan.vermeulen(a)cawdekempen.be 0479.82.01.41 Powered by Linux.

1 0

CentOS-announce Digest, Vol 114, Issue 4
by centos-announce-request＠centos.org 07 Aug '14

07 Aug '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2014:1013 Moderate CentOS 7 php Security Update (Johnny Hughes) 2. CESA-2014:1011 Moderate CentOS 7 resteasy-base Security Update (Johnny Hughes) 3. CESA-2014:1012 Moderate CentOS 6 php Update (Johnny Hughes) 4. CEBA-2014:1015 CentOS 6 ksh Update (Johnny Hughes) 5. CEBA-2014:1016 CentOS 6 cups Update (Johnny Hughes) 6. CESA-2014:1012 Moderate CentOS 5 php53 Update (Johnny Hughes) 7. CEBA-2014:1018 CentOS 7 libdb BugFix Update (Johnny Hughes) 8. CESA-2014:1023 Important CentOS 7 kernel Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 6 Aug 2014 14:38:20 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:1013 Moderate CentOS 7 php Security Update To: centos-announce(a)centos.org Message-ID: <20140806143820.GA13290(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:1013 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-1013.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: b5ef4bdcac98f69801f6950032788dc71c13e729e16aded45f4a5f8108db112d php-5.4.16-23.el7_0.x86_64.rpm 22265d01f4360d990b57b24d4db91989ee3abb72dd28d8245fef7a0830d2e530 php-bcmath-5.4.16-23.el7_0.x86_64.rpm 6aa4eb30729e984aac8e688c181014b5b24dbc2a4fe07ec9e5ddcc3abdc8bd98 php-cli-5.4.16-23.el7_0.x86_64.rpm ee24e82aac2931ac223815a99898a4c0e1a03d36fe0d429030660ef4807cbfa0 php-common-5.4.16-23.el7_0.x86_64.rpm 50514030164a79f7d2d00433d9e06f3e337ccd2f36c6e7ac48d90d6d04f72aa2 php-dba-5.4.16-23.el7_0.x86_64.rpm 19e592a10d7de9897bc22b80a46e6e04ee8d0cdca1765a6bda7f6175593bea56 php-devel-5.4.16-23.el7_0.x86_64.rpm 0b08cb10488d362f929f9fbe705fb6c67fcf7de5a69d5f49ff34f0c0a2898fa9 php-embedded-5.4.16-23.el7_0.x86_64.rpm ecb90846a122d9e4940b019f738f8cb3ac2f135a1111d4ac44f263b55ba5efd9 php-enchant-5.4.16-23.el7_0.x86_64.rpm 2dbd5e908245f6e0a5601fa6ae577306e7ab3f5cbe219419c272cacca39739a9 php-fpm-5.4.16-23.el7_0.x86_64.rpm b61f9949aecc5390727530d4d34ab078a8e62654ea151332f3c122f66f2bd630 php-gd-5.4.16-23.el7_0.x86_64.rpm d9df8bdfa537f8f57ebc63f9214c5ec15c9217133ee641ed2a9e55fab51e5a6f php-intl-5.4.16-23.el7_0.x86_64.rpm 8c67cc1f006e11bdd8ffb8e4db4b231c252d2157673a9816d1c243e0a186be95 php-ldap-5.4.16-23.el7_0.x86_64.rpm 63ad7b32ec17a38a3a025368504558793948cbda66f5e8b0623f9687fae67afd php-mbstring-5.4.16-23.el7_0.x86_64.rpm 88b410e42c4bb11f39724b9ff35e665eb3ef6452481c0a3d639c1587f90cd870 php-mysql-5.4.16-23.el7_0.x86_64.rpm d8c9707eb7d7a30753d9fd8a8211aadd2bd1a8131550b10461ff1c32a13d79e1 php-mysqlnd-5.4.16-23.el7_0.x86_64.rpm 84582b25643ab30225b35c18010c07cf4253c2ab5916eac14fd4f598c369e7bc php-odbc-5.4.16-23.el7_0.x86_64.rpm 2243ca2be011d78e89f1c20c41d84a009ea9228bf844e1d4d7a5841b61a81397 php-pdo-5.4.16-23.el7_0.x86_64.rpm eef7a0750a81b8642b74fa26bf93f7bae1c330183995cb0754384ca840ff28db php-pgsql-5.4.16-23.el7_0.x86_64.rpm bcd51ed79183446b2369033e3ad6350ad976bb2957e1c8d153f3dbbc810cb958 php-process-5.4.16-23.el7_0.x86_64.rpm b68e439c111666ee366be2257175db26fdb8173b01c6dbf6aff58a6c0efc0c71 php-pspell-5.4.16-23.el7_0.x86_64.rpm 8f0bad5c6983b80914c0f32d04d37d68f40803b20fa1ea27202eafc2c889ceeb php-recode-5.4.16-23.el7_0.x86_64.rpm db63ee619d8f160c37ec644fc73b95dc43e13cc807aa6d2918ba22ee9cc0f60d php-snmp-5.4.16-23.el7_0.x86_64.rpm 6dda4e1f55fd492a55a5d1c2dfad87dd1140a35c63ccaef27d8dcdb618b5f248 php-soap-5.4.16-23.el7_0.x86_64.rpm 945c20dcf3b9609f202e74e132ea6781444cd19b779c5a52ef6f350075c51251 php-xml-5.4.16-23.el7_0.x86_64.rpm 20d51363438741ae8218dfc2a366ab05929033239a3b71924dc10af5ba32a95b php-xmlrpc-5.4.16-23.el7_0.x86_64.rpm Source: d58e1ddad3a5942503d5003ae0f51bfe8f83cd2c7d26bf38edc2e4871770355b php-5.4.16-23.el7_0.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Wed, 6 Aug 2014 14:38:38 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:1011 Moderate CentOS 7 resteasy-base Security Update To: centos-announce(a)centos.org Message-ID: <20140806143838.GA13415(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:1011 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-1011.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 614181e7113b22b6fcf47582504f105eac9318a4293bbf7ebaf5a92b34f20d19 resteasy-base-2.3.5-3.el7_0.noarch.rpm 478e94c88ac285bf441fc1130421d30662d116cb79e0821f81b14f8636b04b1b resteasy-base-atom-provider-2.3.5-3.el7_0.noarch.rpm 02a021303c01e7b41ba98a7d460723d7e2c5a81fc48ef7712997315e4ac325fd resteasy-base-jackson-provider-2.3.5-3.el7_0.noarch.rpm 3a312b6eb210d12f94eff5364dab796ca8c596feaab024e6b723d5a8a604ddd0 resteasy-base-javadoc-2.3.5-3.el7_0.noarch.rpm 18bd090ae09bcb74817753ed4df84d747ecc56448367e8b5bb77a0b46cdfa2ae resteasy-base-jaxb-provider-2.3.5-3.el7_0.noarch.rpm dc369cbf575dddfa279e1e219ab50d734f1c4a6cfb2e63f44c2260b9e557c167 resteasy-base-jaxrs-2.3.5-3.el7_0.noarch.rpm 05fe07324c3e3bc14bd3f778895a2e498be1c56ffe6008ed918e370263407152 resteasy-base-jaxrs-all-2.3.5-3.el7_0.noarch.rpm 89eeef44c2e4e0b35dc10a5398372a16796d91f0bf5bdd2783b81487feebe596 resteasy-base-jaxrs-api-2.3.5-3.el7_0.noarch.rpm e62ee9a1f7d5dd61bd0c0d1aff9d829acf4afc93978d2457cefc3cec43aa77a4 resteasy-base-jettison-provider-2.3.5-3.el7_0.noarch.rpm 2224cd51ee821f60f12a0a21c5fd096eb6e3449fcde25799e22172b5bfe2a696 resteasy-base-providers-pom-2.3.5-3.el7_0.noarch.rpm 9c1b745a15baf75c07744d4e30d12b3513201223426cc410b25b42899a585779 resteasy-base-tjws-2.3.5-3.el7_0.noarch.rpm Source: 9e69a19d1f0a995a670be0d3906179d64cd4413763c7ad63e600b714c507ab5d resteasy-base-2.3.5-3.el7_0.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Wed, 6 Aug 2014 14:53:37 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:1012 Moderate CentOS 6 php Update To: centos-announce(a)centos.org Message-ID: <20140806145337.GA17725(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:1012 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-1012.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 8cf24ac8ef762128866d8095f54230a8b5e7a32e765faf88a88ed409eda62121 php-5.3.3-27.el6_5.1.i686.rpm b73aa076759ec634e82d952a20f6653d153ae08ecab7cff1ee6d72929a94f1a6 php-bcmath-5.3.3-27.el6_5.1.i686.rpm 71723f5d56c7a24b411b73f5a37ad5a2cc1ae42c7168a964413715191f5d85e7 php-cli-5.3.3-27.el6_5.1.i686.rpm 599cd1f563bfba791713a7c8592357d9c675199d33736468127fea97237b6fc3 php-common-5.3.3-27.el6_5.1.i686.rpm d0df282e0a411d18accd4b4d3b2205a991156bb8ae1989d7f3d7f2c5e41d9a14 php-dba-5.3.3-27.el6_5.1.i686.rpm f0655b9b0a8f77c8e2b692c46d473b447c389315114c7790308e286260f1cd57 php-devel-5.3.3-27.el6_5.1.i686.rpm e1058e324c721a9923923b4b0b080921fba6551b6f9b9293f2d0a2eda8442230 php-embedded-5.3.3-27.el6_5.1.i686.rpm d78ff999475221753e31375fe4e6d577fc03ba4975ea2f9d0276701ba9b5bedb php-enchant-5.3.3-27.el6_5.1.i686.rpm c34718cee768a9e3601b648925155b8f86b9bd90f9840993998aa56033e7350a php-fpm-5.3.3-27.el6_5.1.i686.rpm 5a4d56890c80161c343345a76b91e85672c6df190b7fbfacdfdf99b1139986b1 php-gd-5.3.3-27.el6_5.1.i686.rpm 92df2d90d45e211011460ca1a00b65df26996d9617baa3bcf64d1c52af65383d php-imap-5.3.3-27.el6_5.1.i686.rpm 5a5585f58a2f974ffe5af889c498cd6418c7d102db3655ce5e16d740ae5d0135 php-intl-5.3.3-27.el6_5.1.i686.rpm 7fc140d70f98a39eeb29435f5953d3d999993bf23a7b798793ab09a8f7ac6f57 php-ldap-5.3.3-27.el6_5.1.i686.rpm 13e8666bbb6abf2d0fff454a2323f6db331c046d48ca7fc547d3d4ad1b2ce46e php-mbstring-5.3.3-27.el6_5.1.i686.rpm f5b199849c365a71ff45b43e8f6d0c08c9e7af47d888514eed7b6019ad49ee82 php-mysql-5.3.3-27.el6_5.1.i686.rpm 684786c3e523266926a8f370961a091c0bcf08def92fafa8a5ffd2e57fc535c3 php-odbc-5.3.3-27.el6_5.1.i686.rpm 4eca66ab05be6c56f5c135666395ba1759ac2c571bf12e620bba2ca66da5ab08 php-pdo-5.3.3-27.el6_5.1.i686.rpm 10475ca3214fc92804b16bab67f8106c3ff717201ee05bddd333d4667e4cdb87 php-pgsql-5.3.3-27.el6_5.1.i686.rpm 7f0cf8143a4086cb4297465706740ff5c022cd2bfb5335863b08c1a3f506d05a php-process-5.3.3-27.el6_5.1.i686.rpm 54b7f57e3a9868aa9314556b625be75b6c449f2f6ac4169b33922c0b794c9589 php-pspell-5.3.3-27.el6_5.1.i686.rpm 5699a1ba94376b1dc39845b3083963993fde44b6d00206ede6044b6e3230f837 php-recode-5.3.3-27.el6_5.1.i686.rpm 2638c1d16855c014b78d3e23555be19fc28c0092dbc6ee7a7e06a15a5c1072b3 php-snmp-5.3.3-27.el6_5.1.i686.rpm 35c0c8a10bc203b3e38977db4d6cefa3c9d4c014b847f6c0ccb3df18f0ef5639 php-soap-5.3.3-27.el6_5.1.i686.rpm ea37a7114981135ed617bd7b565c3f380ac27b4a00f37e72769e2bce2195594a php-tidy-5.3.3-27.el6_5.1.i686.rpm e50a1230a4e043470e6e8c3bc128507cc0fd26ca58c7d602690aae846bca2632 php-xml-5.3.3-27.el6_5.1.i686.rpm d1adb137e04fdb88e31ac660d0c4b547a152b7b00550f1ff8bbc8f40f104e6a8 php-xmlrpc-5.3.3-27.el6_5.1.i686.rpm db4d4446f9fb72a9441849b968257eb8ae6ddba7cd16f488745cf457b5b80795 php-zts-5.3.3-27.el6_5.1.i686.rpm x86_64: 8081d15a0bd1a3219a9d11b41cfd4099337aab58d55006e0b5102acea7bfbdd9 php-5.3.3-27.el6_5.1.x86_64.rpm 12455c27819aa807911047cd628561b2b94cf16a99258ef5c5d3221f2d7718f9 php-bcmath-5.3.3-27.el6_5.1.x86_64.rpm 2b678546cb20406d84150c5c90bfb8160ed988a8cb8c6868980e01cc97cee33a php-cli-5.3.3-27.el6_5.1.x86_64.rpm 03e157e53effcc5045f759ea13f0f098498364d8dfff488b8cf7dd29d0892da1 php-common-5.3.3-27.el6_5.1.x86_64.rpm 55e56c8f7c031f7f018463cbc8545baec7efda8435195cf03db4adf1bca9431f php-dba-5.3.3-27.el6_5.1.x86_64.rpm 806e4f59a4b86a139cc6beba52505686acf5cd55e459fd7b306ee6322d4c945f php-devel-5.3.3-27.el6_5.1.x86_64.rpm a63ba983eaf09e39999edc8871b4ce02832bed29087fa1a207bd942d6bde18bb php-embedded-5.3.3-27.el6_5.1.x86_64.rpm dc9fb030b12c224c6d1ab098477a15dbe623c775ce3d5e25edbc52096aea7f77 php-enchant-5.3.3-27.el6_5.1.x86_64.rpm 39f7a0bc10cf6c9f5fe8cd844a4fed372e3ba0e1c3a84546083aa6506a3e834f php-fpm-5.3.3-27.el6_5.1.x86_64.rpm baf76f4eec0f31d1cfa14ad03ce9f2399346b7e8710edbe5d1bc80d3ddfa0e51 php-gd-5.3.3-27.el6_5.1.x86_64.rpm 93e05c73859b5963ae6f3cd70a4dcf3926bfbd6dc1db2567571710aabab3bf1e php-imap-5.3.3-27.el6_5.1.x86_64.rpm 71b8cce5cd882e4def900a5f64093267949ac9336b5e10f92684a4bccc56425d php-intl-5.3.3-27.el6_5.1.x86_64.rpm ec6b2c72cfc51afd73f93fb50b6e7ca92ae044106db726411e6249825523bbd6 php-ldap-5.3.3-27.el6_5.1.x86_64.rpm 37343492016b33e5e6132af216072ed9fded9312fb6069067155e9a7325ce14d php-mbstring-5.3.3-27.el6_5.1.x86_64.rpm 20ccbebe9fce2c91e5d58a8f17906012bffd4414d4f96a76bd82eafa24a5b30a php-mysql-5.3.3-27.el6_5.1.x86_64.rpm 737aeed98b1d6b05b58d61a102934dd9fbabd820c78b279c2e19a9fa9fc5369a php-odbc-5.3.3-27.el6_5.1.x86_64.rpm cb7c78ebcf8d443782af3f6d91ac5c78eb5f354c3726fd52cf7b5e8c9661f241 php-pdo-5.3.3-27.el6_5.1.x86_64.rpm c680b142f45d22b4fd564cd15cf3022d3eb7246ae8454bec106d5e3a1a6bc4b1 php-pgsql-5.3.3-27.el6_5.1.x86_64.rpm 7d05e10177d500498b1b31f45c78732834a83ef8b0b7fed96c0457c9e64d04e9 php-process-5.3.3-27.el6_5.1.x86_64.rpm 16351fa7d0c692d54dc00b5d7e63b1461f24035b41c238ab4e36bcdb1354a618 php-pspell-5.3.3-27.el6_5.1.x86_64.rpm dc68a3b1ddd1895a3f3da71367388f7863272c3b3f4968331546be6a8d1a515f php-recode-5.3.3-27.el6_5.1.x86_64.rpm 81afcd2e813553dddca4fae942175bac3af51bb62d333e6069d250fd98c1a8de php-snmp-5.3.3-27.el6_5.1.x86_64.rpm 4eed8309bd660443819ee141859a730b49ed585cb6fc689d8c9be13565e9efdb php-soap-5.3.3-27.el6_5.1.x86_64.rpm 3e4448c1f47992012372955567f66def815aba5477a745aaf0b1e95915321446 php-tidy-5.3.3-27.el6_5.1.x86_64.rpm ef40b60b7102fa96a065e7b3d428a7b0a9be7643531d849a013f8e322e7e1afe php-xml-5.3.3-27.el6_5.1.x86_64.rpm 998d659050947356bbf3b2760878fc52491e21ba2629a7bcd7e06e6c3438270d php-xmlrpc-5.3.3-27.el6_5.1.x86_64.rpm 917c6e459c333b85bdb0c7a5f4cbc178a3c8b26d3ee658990d53b4e974823a76 php-zts-5.3.3-27.el6_5.1.x86_64.rpm Source: 542772faf1c6d6c2e5a4382aec2a568cba0809e4da868e801e917bf6d6fdd812 php-5.3.3-27.el6_5.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Wed, 6 Aug 2014 15:07:17 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:1015 CentOS 6 ksh Update To: centos-announce(a)centos.org Message-ID: <20140806150717.GA18102(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1015 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1015.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 26a51d02db505d01a079879f1fee5eea3f6605f64ef883e1b0a0817d92dee8fd ksh-20120801-10.el6_5.8.i686.rpm x86_64: 665c80863217369f9a8fd08ee1bc5a59a23098f69d9adb74681d4ef7e34fbf63 ksh-20120801-10.el6_5.8.x86_64.rpm Source: 797e51ad4a6850c7739cc19aeca0724d362fa6be56f2972f7b00d799bcbd223d ksh-20120801-10.el6_5.8.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Wed, 6 Aug 2014 15:08:11 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:1016 CentOS 6 cups Update To: centos-announce(a)centos.org Message-ID: <20140806150811.GA18390(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1016 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1016.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: fecb1d7188cc96c840f41c86661286a94cbf2be8251088488e2059680ff13aec cups-1.4.2-52.el6_5.2.i686.rpm 206960bae48db662d8e06f795b14efd6ba42e807c77778e46cba00dff99b3eb7 cups-devel-1.4.2-52.el6_5.2.i686.rpm b9673d206770a5551da395f6e1df8968d4e39fd9ca5e3f370f37c9c3a8703a7f cups-libs-1.4.2-52.el6_5.2.i686.rpm ba51cd566aae3f0026c40aa1eba81d5caa478c990722a822ac46cf82ee5e0edd cups-lpd-1.4.2-52.el6_5.2.i686.rpm e417140951472b69350c8d4f6c79af529e842f9b4cdb3a35f128a19e89e3e28b cups-php-1.4.2-52.el6_5.2.i686.rpm x86_64: 0437279d6377470ba8d928cafc6bfeb826fc6f071c3a03c687c8e069b25ec81c cups-1.4.2-52.el6_5.2.x86_64.rpm 206960bae48db662d8e06f795b14efd6ba42e807c77778e46cba00dff99b3eb7 cups-devel-1.4.2-52.el6_5.2.i686.rpm f79e4c3e2f02569ebe2122e02e22a1a3062870a32c1abf5c99b874b5631375fc cups-devel-1.4.2-52.el6_5.2.x86_64.rpm b9673d206770a5551da395f6e1df8968d4e39fd9ca5e3f370f37c9c3a8703a7f cups-libs-1.4.2-52.el6_5.2.i686.rpm 57fb73171272e792bbb5324a61b9c03c2b52dc3456fd65d53ea83d6e8ce2d098 cups-libs-1.4.2-52.el6_5.2.x86_64.rpm d14e3cd98188171f63ad79caedddef9ced4eac42d0230c0cc9e7df3e09821c52 cups-lpd-1.4.2-52.el6_5.2.x86_64.rpm ac890dee45848b764275ea21ae93265b89442152da0dffb1e9947a5cccab03ba cups-php-1.4.2-52.el6_5.2.x86_64.rpm Source: 5a14657989585cfec84879235195b8d4730e7ab3108bfa7df5c2349d506e3001 cups-1.4.2-52.el6_5.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Wed, 6 Aug 2014 18:20:19 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:1012 Moderate CentOS 5 php53 Update To: centos-announce(a)centos.org Message-ID: <20140806182019.GA31036(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:1012 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-1012.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 4bca688c26b2e1e411b356b38c667706e71ed426ea4db73f6b89e62b71092bb6 php53-5.3.3-23.el5_10.i386.rpm bc518cb356a3c0ff0865c0c5b32b6abc3915f7ebf28eec65cdd5b1fae2bf94c3 php53-bcmath-5.3.3-23.el5_10.i386.rpm 59562f981392cb318335cdb9748224a61ffb61d0edc19dbb493056e1565bac3d php53-cli-5.3.3-23.el5_10.i386.rpm b97e68f1d43459ab418d478600df78d704e60fe471bac53c2b196a9d872164e1 php53-common-5.3.3-23.el5_10.i386.rpm da1bc54b63417fc5841b25b18393a6ae56f9803c35768b9fabf43692d46c07ef php53-dba-5.3.3-23.el5_10.i386.rpm d92c9345f7d05ef140cd4e6856d2992eac2ab92a5dd11be8bd90fdbd1b008086 php53-devel-5.3.3-23.el5_10.i386.rpm 58fa1ae8456faf0c4eb9e858afd7cf80393e2e5756daebf909ae2ac113a49762 php53-gd-5.3.3-23.el5_10.i386.rpm 3857846c73d5b7f5deb3dc1115b585608a3da824b84ece5bccc31ae9e9c45048 php53-imap-5.3.3-23.el5_10.i386.rpm d49a93c45cd2d87552c7cae7a29f3907385bbc8191a924d40492317b667ba207 php53-intl-5.3.3-23.el5_10.i386.rpm 06b34d89c19f8015955f5ca678022eea7583e558c096c5ca6f60944305f35180 php53-ldap-5.3.3-23.el5_10.i386.rpm 1d8dfb465720b6f2ada0957407376fa61ceb4571978979bd656c38c28e7a0818 php53-mbstring-5.3.3-23.el5_10.i386.rpm 48c8c2b09cd66c7cbb2841a63bdd5c16cfaca6a9007c200c1227c88a11de2dc1 php53-mysql-5.3.3-23.el5_10.i386.rpm fe7171b7f52ad2b7bdc9f7c3b4d020de2cda81717053e2de65c98b7c53e7389e php53-odbc-5.3.3-23.el5_10.i386.rpm 83688ffcefc4768e81607cf19760cf788131e465d9edb8b9172d55008e2121c7 php53-pdo-5.3.3-23.el5_10.i386.rpm f07d5b641fd2d148d6230a3696f3697873913e08bcdb120d65b9c9f40ad5bd38 php53-pgsql-5.3.3-23.el5_10.i386.rpm ee8c259e50e60b1944e25413000fdf83d3561bae07e627afde6780c343d21788 php53-process-5.3.3-23.el5_10.i386.rpm 2753489449a1990a14f1369fd20b10286a72c6066a827ff4c6c347f7e0c7e2f9 php53-pspell-5.3.3-23.el5_10.i386.rpm 0ecf19c3e1ccc8199910f572aa04718df38d8cf7ea8106224a8e4f1dc35af918 php53-snmp-5.3.3-23.el5_10.i386.rpm 65b088236df9d14dc0cc184a378590c7cf92afa0aba93eec578cf91200e49e83 php53-soap-5.3.3-23.el5_10.i386.rpm 897452308d675c5205c722ec934ebbe5d2fc10fa7d2b22679e664d4449ebadcc php53-xml-5.3.3-23.el5_10.i386.rpm aa4161e6395ecd8250f0821817ad6c8970dcf05b391beee346c9f4b1145f92fe php53-xmlrpc-5.3.3-23.el5_10.i386.rpm x86_64: 9434330ae8345e3f12c26f5d203d06bce81a531cdcaf92b0dc0c809dcdf74b27 php53-5.3.3-23.el5_10.x86_64.rpm c843af01a097902ccb6436317bf685d3ec7704212dc73f9dd2cbacbfecd85a63 php53-bcmath-5.3.3-23.el5_10.x86_64.rpm 430252b7f7e382852e2ac4bc2f06cf1769ddaf7edda540672f698d7fc570fe43 php53-cli-5.3.3-23.el5_10.x86_64.rpm e673dd339ecc1a7bd3a16799dabf196a4b920faf2a4311175cf6573a6338c99b php53-common-5.3.3-23.el5_10.x86_64.rpm 4f839f712639f9d0d64d143dbd0709db314a2c3fa4b8204ee3d678ec07df127b php53-dba-5.3.3-23.el5_10.x86_64.rpm 170b77cb676750d41cdf054a4b365c88ac04491e4a93d3fe2b6f34b8901158dd php53-devel-5.3.3-23.el5_10.x86_64.rpm f98bde0963761c204b9addc889150694b60ec7a3b0f9c1aa0df8904fde9cf0d6 php53-gd-5.3.3-23.el5_10.x86_64.rpm f71e42b8009ed375b222fff0f3ec5e180f711fb72d58b5a45a18685ff9287697 php53-imap-5.3.3-23.el5_10.x86_64.rpm 6e2e42d540546a636a6b51d4f7ccc4f9af51f5bd3d9aff0a56ae2986226deb20 php53-intl-5.3.3-23.el5_10.x86_64.rpm 8847638ef9076f0dd224af122b1206bbdf043992496d6a72d11f5bb890c08e07 php53-ldap-5.3.3-23.el5_10.x86_64.rpm 68781f3f2660c471ab24259ea0abda88e72261e968ff38921ccf43382039a8b2 php53-mbstring-5.3.3-23.el5_10.x86_64.rpm 40a1b889fa4f24c35c4e3c6b563fb0110192622dc6dc2094ca0d6ee73c6ca671 php53-mysql-5.3.3-23.el5_10.x86_64.rpm 53c33c924258ef6214ab14d8233ba0a21dcdae503624727fa042c281587fcc1a php53-odbc-5.3.3-23.el5_10.x86_64.rpm 524d32c9be143508672d5f68277472b3287f3edfcfa66a5b66f696bfa0b3f7c0 php53-pdo-5.3.3-23.el5_10.x86_64.rpm e274aba7e89e731f39110c53b1f91f0eeb7178287fd3dd85c5fc67c4143a0bc6 php53-pgsql-5.3.3-23.el5_10.x86_64.rpm 27d2744ce9744ffa44a49ef6d1381598875813443ac5e4e2915c071fe1334e8d php53-process-5.3.3-23.el5_10.x86_64.rpm 64b17384071597a3f850f0fe867c4ea6b1516dc1bba7e74528f4fada416567c8 php53-pspell-5.3.3-23.el5_10.x86_64.rpm 1ce43a2febe9f340debcb451162a9d2b4847eecc6b6ba850b1290dea837fb6ff php53-snmp-5.3.3-23.el5_10.x86_64.rpm 86ec6c676a430dda5b1fab593a4fb0d3073a1fbbb0736a249c1be29daf5e3ff0 php53-soap-5.3.3-23.el5_10.x86_64.rpm e5d434c6fce30731f01071fb646c4affe2ea10c6c718aa892b8112ed789b6863 php53-xml-5.3.3-23.el5_10.x86_64.rpm 71c92df7747e80b851a0dcf71facd18e77bdb7a225e361000d500305b7f26d45 php53-xmlrpc-5.3.3-23.el5_10.x86_64.rpm Source: b62f6b773a05e2f8238a85b053debcbf8b505d2211fc4f4c2a89c55635a64489 php53-5.3.3-23.el5_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 7 Date: Wed, 6 Aug 2014 18:51:17 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:1018 CentOS 7 libdb BugFix Update To: centos-announce(a)centos.org Message-ID: <20140806185117.GA34127(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1018 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1018.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 2f4181257a461258cbf7539abd11a16e04b47fcc5d4c3265b6eeeae1d056207f libdb-5.3.21-17.el7_0.1.i686.rpm c8da0653dac93057bc6dc3c657138c1dbf5de1f23dcac87eb5d61930e246aac7 libdb-5.3.21-17.el7_0.1.x86_64.rpm b7af142fad6f2b52273cfa9bfb64c98eb0891eaaa4318630bd74f888ed360be3 libdb-cxx-5.3.21-17.el7_0.1.i686.rpm e608b6f7a1d3eb4d897f69d09fd0f6a4eae5bf9e45a3f10a639d2fd03de8c66c libdb-cxx-5.3.21-17.el7_0.1.x86_64.rpm 7a8fa817977e2a3a17d5eec72fee281e2664d9eb80598b99e3ea73c2e7b3524f libdb-cxx-devel-5.3.21-17.el7_0.1.i686.rpm ea957f048186c315f4604d975d6060bd103b49ce58046b4731a86836c8c32de9 libdb-cxx-devel-5.3.21-17.el7_0.1.x86_64.rpm 3c93b7cc5d3d9e3797365060976688089338e5cbb0001f7de0953ceb727ec4ca libdb-devel-5.3.21-17.el7_0.1.i686.rpm 26fa53fb5d33e1decfc0691bed4cd490ba5ddfb0b0ca9087baddc8ce71ef4e51 libdb-devel-5.3.21-17.el7_0.1.x86_64.rpm d87d97516f208a6a3482bbdf2de793c7b985fac012e2cb3bab906fcad19e5347 libdb-devel-doc-5.3.21-17.el7_0.1.noarch.rpm b92bf2a11c29bd62c7c11a5220ccc17f917cabb5472a7b189d618a11840f8f7c libdb-devel-static-5.3.21-17.el7_0.1.i686.rpm 60bae5e3856dc82070458e9233ff9ec8d9e2057452a9b4a00319bf16f99cd1a2 libdb-devel-static-5.3.21-17.el7_0.1.x86_64.rpm 173ed146dc5a5881c141e9a552c7154b2e493402a7308fd83b5ec67fe96b2faa libdb-java-5.3.21-17.el7_0.1.i686.rpm 5ec0a5a9fcdad870ea0be7a475a279055e8ec19401aaa311aa12f760818bf262 libdb-java-5.3.21-17.el7_0.1.x86_64.rpm aac8fba875f2f962514b4e00a14c781ab3bf33fa02c91cfb6f6f95494bfbf4a5 libdb-java-devel-5.3.21-17.el7_0.1.i686.rpm 5bf6ef38db1f28566d8a3d31bf5b744a7757de82e1598958c91d41d6bb925010 libdb-java-devel-5.3.21-17.el7_0.1.x86_64.rpm 47377eaf6581f3627daf22212f9a90fa78f3f558dd95508a1205556e842c1499 libdb-sql-5.3.21-17.el7_0.1.i686.rpm 5e09ac8d1edaf8768945ae5067c8d7eb0d7ca714358f7fba7396c4263fd564bf libdb-sql-5.3.21-17.el7_0.1.x86_64.rpm c8dbf6d1ad6e088828f62b83f63f8ec195ceedd1fdf514781527d6666ab234ea libdb-sql-devel-5.3.21-17.el7_0.1.i686.rpm 01bfdc9db134b8ca5558162c19a8f79f01cbe5a1ed8f781777e944ae52091e56 libdb-sql-devel-5.3.21-17.el7_0.1.x86_64.rpm 695c494b27d12519a70da03c256d1c9fe5912d3fbe8c4344c1a641da5d1d29c9 libdb-tcl-5.3.21-17.el7_0.1.i686.rpm b81266b83c4b1b828cdf2622c34926506c9ce0bdf26825a4360f860ec42b4f73 libdb-tcl-5.3.21-17.el7_0.1.x86_64.rpm ba5cb256373726f4aa0c68f42b0a3a3aba6969d9c6dec60deecd0652ae0958fd libdb-tcl-devel-5.3.21-17.el7_0.1.i686.rpm 27d72daadeedde04d092a899577bfbe73fb95580fbd4df1ffb2e631b12ca7142 libdb-tcl-devel-5.3.21-17.el7_0.1.x86_64.rpm 4ace1300d643f53dbe1ecc8ffd2db958f8a1863629cb5f7c9098cbd8ec00284f libdb-utils-5.3.21-17.el7_0.1.x86_64.rpm Source: 3a48e7f6701f5804909f15c15fabab1e363dc2475045a47d893951fef7d473f1 libdb-5.3.21-17.el7_0.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 8 Date: Wed, 6 Aug 2014 23:41:07 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:1023 Important CentOS 7 kernel Security Update To: centos-announce(a)centos.org Message-ID: <20140806234107.GA40119(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:1023 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-1023.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: d1bcb6743886e4989289fbd25314aa84c9f9fbbffd5d3228a7843b470ee64a47 kernel-3.10.0-123.6.3.el7.x86_64.rpm 31a230d3efec87f8870659e8a87afd69d498b109b4611baf856e4001c5b6bafd kernel-abi-whitelists-3.10.0-123.6.3.el7.noarch.rpm 41bbe5c5dda4339f9fd650885d93ecc107b36baa8d8896dcbd3f03632b90319a kernel-debug-3.10.0-123.6.3.el7.x86_64.rpm 7e77a43698e992034e3ed066363fbb711093ffc3123ca8395eeb6dfbd88f8cd8 kernel-debug-devel-3.10.0-123.6.3.el7.x86_64.rpm 64704d364be87de48541649aa5bf1eb6ff93df740492f61db090c122e9459e91 kernel-devel-3.10.0-123.6.3.el7.x86_64.rpm e9978ca2e4c3065b58827b6de242c66227dead9d0ea5dca2982606f3c16e42d2 kernel-doc-3.10.0-123.6.3.el7.noarch.rpm 30932db8eb585e5cc4a9aa75bf2adfd8674df42bb350a03366c5fc23b8958c6f kernel-headers-3.10.0-123.6.3.el7.x86_64.rpm 826e401eec30a2bb3cdb89c499ea772a9b341782764cb634f1c931f37a6ddb33 kernel-tools-3.10.0-123.6.3.el7.x86_64.rpm 7b112ae0b51c0aff4543246e7efa31f3eb85f3c8ef5c952b887c80e30379a1c4 kernel-tools-libs-3.10.0-123.6.3.el7.x86_64.rpm 17519a4e19233fd05f15243d6cd5c9367f8aa84f24a2f9ed17eccff792566131 kernel-tools-libs-devel-3.10.0-123.6.3.el7.x86_64.rpm 20c897e7c99a72b419e7454cd15488fe01c09396497d456b83af377f9329de2e perf-3.10.0-123.6.3.el7.x86_64.rpm 90d3c0f4286e9a15b5ddefefb1cdc5cd4008716f42d4fb6463c35e3c7d178da8 python-perf-3.10.0-123.6.3.el7.x86_64.rpm Source: 7294b50ea24b9c3c13b79123f943f0e1b329f65a1550fa37d1d9e5a803a77181 kernel-3.10.0-123.6.3.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 114, Issue 4 ***********************************************

1 0

Automating the preparation of kernel sources
by BC 07 Aug '14

07 Aug '14

I have a driver that requires installing the kernel sources (into my own rpmbuild tree, not the system) prior to compiling. I followed the info for centos6 here: http://wiki.centos.org/HowTos/I_need_the_Kernel_Source#head-a8dae925eec1578… I can successfully compile and install the module from tarball after manually prepping the kernel sources, but I need to turn this into a proper RPM and am wondering if there are macros I'm not seeing for how to prep the kernel sources as part of a %prep or %build phase. I have looked at many real-world spec files and googled all afternoon and cannot find any info on this. As this will ultimately be a mock build, having to go into the mock shell and manually prep the sources would be a PITA. Am I looking for something that doesn't exist? Thanks for any suggestions you might have!

3 3

Returned mail: see transcript for details
by rgm＠htt-consult.com 07 Aug '14

07 Aug '14

The original message was included as attachment

2 1

Shut down DN2820FYKH with power button
by 尾登信吾 07 Aug '14

07 Aug '14

Hello. I've installed CentOS6.5 x86_64 on DN2820FYKH. I want to shut down with power button. But, the acpid daemon cannot work correctly. And, after I selected grub menu, the error message "ACPI: Unable to load the System Description Tables" is displayed. Does this message relate to the issue? I've checked, but the issue doesn't solve: *BIOS update ==> BIOS ver.0028 to 0038(latest) *BIOS setting *Legacy/UEFI boot *CentOS setting ==> /proc/acpi/ directory does not exist. Please can anyone help me with this issue? Regards, Onobori

3 2

Zombie users in Centos6
by Cosme Corrêa 06 Aug '14

06 Aug '14

Geetings, I have a machine with PAM using LDAP. Some old users do not disappear from: * getent passwd But, they are not in: * /etc/passwd or * LDAP Where are they? Any idea? Please, I am affraid of ghost. :-( TIA -- Cosme Faria Corrêa

3 4

SSSD and auto.master
by Simon 06 Aug '14

06 Aug '14

Hi, I have successfully configured autofs to use SSSD, which in turn retrieves information from an Active Directory. /etc/nsswitch.conf is set to check 'files sss' and I'd be really grateful if someone could confirm that I have configured my auto.master in a sensible way - it basically calls other auto.masters from AD. /etc/auto.master looks like this: * * * # Default stuff /misc /etc/auto.misc /net -hosts # Records in Active Directory +auto.master-fsa +auto.master-fsb * * * I ask because I have replicated my config on another similar server and SSSD logs report there are no maps which is a little odd. Thanks -- Simon

1 0

CentOS-announce Digest, Vol 114, Issue 3
by centos-announce-request＠centos.org 06 Aug '14

06 Aug '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CESA-2014:1004 Important CentOS 5 yum-updatesd Update (Johnny Hughes) 2. CEBA-2014:1005 CentOS 6 numad Update (Johnny Hughes) 3. CEBA-2014:1006 CentOS 6 pciutils FASTTRACK Update (Johnny Hughes) 4. CESA-2014:1009 Important CentOS 6 samba4 Update (Johnny Hughes) 5. CESA-2014:1008 Important CentOS 6 samba Security Update (Johnny Hughes) 6. CESA-2014:1008 Important CentOS 7 samba Security Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Tue, 5 Aug 2014 12:36:19 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:1004 Important CentOS 5 yum-updatesd Update To: centos-announce(a)centos.org Message-ID: <20140805123619.GA12498(a)chakra.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:1004 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-1004.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e593f9eab9fe9517cae767a1601e076ebd9d5a6e9d5a81428b72c4cc2c382573 yum-updatesd-0.9-6.el5_10.noarch.rpm x86_64: e593f9eab9fe9517cae767a1601e076ebd9d5a6e9d5a81428b72c4cc2c382573 yum-updatesd-0.9-6.el5_10.noarch.rpm Source: 454fca3b9daf3d7b81de69c7baf18360b738e25a276f2e5f45286ced508b4865 yum-updatesd-0.9-6.el5_10.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Tue, 5 Aug 2014 12:43:07 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:1005 CentOS 6 numad Update To: centos-announce(a)centos.org Message-ID: <20140805124307.GA30870(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1005 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1005.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 73775589315f57bc2cef333366efc3c94623f9fca3f5608ebadd7ff09e50e8ad numad-0.5-10.20140620git.el6_5.i686.rpm x86_64: 8c0ddd8a128903c136934f96f2faa20e244a174d8325009251a0d3cee971e01e numad-0.5-10.20140620git.el6_5.x86_64.rpm Source: 7a2464f91ddee9c5bdb4b672d5a168c388713f9e1f828dda5083fa04c88fb95b numad-0.5-10.20140620git.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Tue, 5 Aug 2014 12:44:03 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:1006 CentOS 6 pciutils FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20140805124403.GA30985(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:1006 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-1006.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: e0d1eec27dcdd4f176cdec2d1c3bb04b66bd03bb3c99ed05a409a19fa4d5dd34 pciutils-3.1.10-4.el6.i686.rpm e289369aed3aa5f7c5bcb4c6f2506368f70ba95e72d848923e436545529f9ff3 pciutils-devel-3.1.10-4.el6.i686.rpm e383c7a70e4cc800b7f039517a2ad67bf41710ed613d8532206d456145749fcb pciutils-devel-static-3.1.10-4.el6.i686.rpm 25afc9d5ea27afce205842d91e2044a6651ed2e4e2ab57c29c3d779b56a66e29 pciutils-libs-3.1.10-4.el6.i686.rpm x86_64: 032d8139acdddb79dbc85e8908a4e47cf797d8dfb73b5667c8e97f4fe902254d pciutils-3.1.10-4.el6.x86_64.rpm e289369aed3aa5f7c5bcb4c6f2506368f70ba95e72d848923e436545529f9ff3 pciutils-devel-3.1.10-4.el6.i686.rpm 4de7d5d29aef3ed87ccf89e5aa9dde0300abcf3cc3aa20b0232c202a5cb56ef7 pciutils-devel-3.1.10-4.el6.x86_64.rpm 77a9d5e8e7a16b4c709a7ccdccd77310aac708487b95fd1563efd5ec74c7d499 pciutils-devel-static-3.1.10-4.el6.x86_64.rpm 25afc9d5ea27afce205842d91e2044a6651ed2e4e2ab57c29c3d779b56a66e29 pciutils-libs-3.1.10-4.el6.i686.rpm b1a79ca5f71ef6efb20c8b9477ed18446264acd8bded5caea8b982f99e8936dc pciutils-libs-3.1.10-4.el6.x86_64.rpm Source: 9f42ada4692461505e6f508bcad431705178dde3ae8a3b93c238cc6ca83c0928 pciutils-3.1.10-4.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Tue, 5 Aug 2014 19:48:16 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:1009 Important CentOS 6 samba4 Update To: centos-announce(a)centos.org Message-ID: <20140805194816.GA48905(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:1009 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-1009.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 2b5e0dbb1a0e11baff46f089b17b26165f3eb107cb42098a922d0965bfa0890d samba4-4.0.0-63.el6_5.rc4.i686.rpm e63069452e40fb86b8fba2e5937270ec73b20058a03d894825e0f954f25608b4 samba4-client-4.0.0-63.el6_5.rc4.i686.rpm e0af066548245ba9e074e1fd8bef3d24e52ce1cc55e5db6278a8c79b14017893 samba4-common-4.0.0-63.el6_5.rc4.i686.rpm c6a9f9c9aad86930d867ae5e04d1bc6799336bde1629387344fd01eb55411d35 samba4-dc-4.0.0-63.el6_5.rc4.i686.rpm ef9491fdc7f29112cd61a95fca9a1f6c9a902828f87a128740b763199070c3a3 samba4-dc-libs-4.0.0-63.el6_5.rc4.i686.rpm 1369ad920e1dc8269f625dc5bab2b950448ddbd43b305e6e0e0682418ba81b6e samba4-devel-4.0.0-63.el6_5.rc4.i686.rpm 90e40375aeabcaf48b3188ca4bff967f74032683bffddc19495ef9d485ceea8a samba4-libs-4.0.0-63.el6_5.rc4.i686.rpm 16afe69b94118cc500680da3adae5dd4e7cbf547aec06bd9140ffdce0d1443fc samba4-pidl-4.0.0-63.el6_5.rc4.i686.rpm 4f37f7e89c48fd779796652be7dec957a53ec378ac8187e6b2fbf4b8c7763bc8 samba4-python-4.0.0-63.el6_5.rc4.i686.rpm 09b4ed0f44b7ef9e5bfe96fe0e849585c43e9ab7f8627bca1a481c55390a90e1 samba4-swat-4.0.0-63.el6_5.rc4.i686.rpm 79f618d9fb30cfcd9a08a63e39c49af3171c6582a3823d8bd120780a11c7d97c samba4-test-4.0.0-63.el6_5.rc4.i686.rpm 5098700ba5751367dec937c3d3f1203993e3faa5bb50830c421ed160fc372039 samba4-winbind-4.0.0-63.el6_5.rc4.i686.rpm 47f68f670c356a239dab751c36bc724418267193f51f0aa281d743fc82925542 samba4-winbind-clients-4.0.0-63.el6_5.rc4.i686.rpm fb345b365fd0ee18027b20110d2a322ecf311078c37cc3c08a2d14cc05fad5b6 samba4-winbind-krb5-locator-4.0.0-63.el6_5.rc4.i686.rpm x86_64: 18707cebc772b236217feb0758746f08965f0b3562ec4d19adbb64084fc1f90e samba4-4.0.0-63.el6_5.rc4.x86_64.rpm 956b66a7f77cad6bd4faa91092f85d7b7fea85dd0e28bcecd151c1f04b160a6c samba4-client-4.0.0-63.el6_5.rc4.x86_64.rpm 384e3921cd373d3069a3e09c7a3706fb6a77fba3dccc4aafc0896329de0df6f2 samba4-common-4.0.0-63.el6_5.rc4.x86_64.rpm 33df4eb26aeb5d3a394ddd1b4b430a520c0f6db470c7d5312b994c6cdf336df4 samba4-dc-4.0.0-63.el6_5.rc4.x86_64.rpm 6a12eec9c5c956da9990809071bee867b710071219b5d7d88270f7322db484e5 samba4-dc-libs-4.0.0-63.el6_5.rc4.x86_64.rpm 54f2c8df6780ccf1a9466fe51a0ce11aef5320da384575cf0da86b1863a3a019 samba4-devel-4.0.0-63.el6_5.rc4.x86_64.rpm b5ecf1803488f09ccf00c3d8b124658e19e19e3d813b94377d5e29368c362f85 samba4-libs-4.0.0-63.el6_5.rc4.x86_64.rpm 8983852f7e9833f32e74de340e03c18a224f2b63a48d2cdf9823249c501a1a9a samba4-pidl-4.0.0-63.el6_5.rc4.x86_64.rpm b0fe6ccc5ddaab3f6d5a0d8692e5a88d3ba6cc437e82bcb533e920e2bd2006a1 samba4-python-4.0.0-63.el6_5.rc4.x86_64.rpm 3ec7ac1b7d5bc9b3a3eef9033d92a78c177973d4aac705080f52f19ae049dafb samba4-swat-4.0.0-63.el6_5.rc4.x86_64.rpm b659b84cdc93051d2e95730ca3733f07b628ccce12e4bfe9fa9782efd6c64fc8 samba4-test-4.0.0-63.el6_5.rc4.x86_64.rpm 66ca0499193ddaaf439dad30ad30cf78bb64c90bed30f54beffaaf3cf0d38745 samba4-winbind-4.0.0-63.el6_5.rc4.x86_64.rpm 6d81c60c8a8948a2db35e73796281d980de42b1439935e6d18413783346a8e7d samba4-winbind-clients-4.0.0-63.el6_5.rc4.x86_64.rpm c92eb0fe79441051065686db661fa5f7a3b0681f75af22559626a48639ebc2a3 samba4-winbind-krb5-locator-4.0.0-63.el6_5.rc4.x86_64.rpm Source: c4eebf0a80f03d3eb8a2d337b91adec8ff3b8a18df87eec4ce22fe29f649a43d samba4-4.0.0-63.el6_5.rc4.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Tue, 5 Aug 2014 20:09:29 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:1008 Important CentOS 6 samba Security Update To: centos-announce(a)centos.org Message-ID: <20140805200929.GA57368(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:1008 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-1008.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 157af858bf13ec971678a8bf3fc6cb649d577e671edadf3c860723a87c736eab libsmbclient-4.1.1-37.el7_0.i686.rpm 90ea2064837184635e7d718b854ced1482b78514c35b26a75125242b342316c8 libsmbclient-4.1.1-37.el7_0.x86_64.rpm 8a02b8e75489ae6972d2dce9cdc641c303903e772913421ad5a0d18ba9b84ecc libsmbclient-devel-4.1.1-37.el7_0.i686.rpm 7fd666c9b7e9fcae08cfe87a1061de6f6bc70c1fe6f9e3b276e08281faaa74db libsmbclient-devel-4.1.1-37.el7_0.x86_64.rpm 6d227ef56d9c743db3ef6ca280232c92a7eac8b7ce831dd97d15eb34b4e456fc libwbclient-4.1.1-37.el7_0.i686.rpm 3b1c4905362c5bded2e3a6b700447adfa16c557a1bed8be96595598ff55f82a1 libwbclient-4.1.1-37.el7_0.x86_64.rpm 671ca7247062ed71122cd1ec1331edb2c1755f97750ed6f00e13400dd2fcc004 libwbclient-devel-4.1.1-37.el7_0.i686.rpm 83fe4ef003c71b863ea3ab01e8b04185659bc68d978c2df13125f43306fefd50 libwbclient-devel-4.1.1-37.el7_0.x86_64.rpm 7183caf7c6dcb326516712ac23575cea0be4e37a012df8cb7b63cf2086f0b397 samba-4.1.1-37.el7_0.x86_64.rpm 42e79f5eb71b4aa57bc6139067432248e594114cb0539675f8db50f5d6dd7711 samba-client-4.1.1-37.el7_0.x86_64.rpm 97cf6229313844589418c4575fa572fc080ecd692e188ec5104b4b380723b6f4 samba-common-4.1.1-37.el7_0.x86_64.rpm 80ad11b7505f5a817d53641187af395a2e91c55001b70266177e8f72129d0716 samba-dc-4.1.1-37.el7_0.x86_64.rpm 5130c403d7e2e4b9a833ba502a5e81653dde44c0a3899d4babab4108aafcf1c4 samba-dc-libs-4.1.1-37.el7_0.x86_64.rpm 95b8eae572868aece91f60d4fffe78d9a5d34f047a8a3ffbe974e2b5e3b305cb samba-devel-4.1.1-37.el7_0.i686.rpm 776351d3c3f934f3edf5fc2dacdac87f39e95d2eb74706e07a867aaf07cc0990 samba-devel-4.1.1-37.el7_0.x86_64.rpm 25f2c7b50fe3d21e2f2680f61b9ebc06623a6cbf1ed6736887e44082c1d3221e samba-libs-4.1.1-37.el7_0.i686.rpm 0d22204b7654868a76bc5d86363407e0385040d8c620ca5df003074ba410b1c0 samba-libs-4.1.1-37.el7_0.x86_64.rpm 25bcaa37576a798026f1d01ba5d2a7c14e4387488d7f90675a9dfd39821769a0 samba-pidl-4.1.1-37.el7_0.x86_64.rpm 4acd838c767daf12db6e6eb1ff7233d7c1bc08f3dcd84262bf4d4903e3fe4f24 samba-python-4.1.1-37.el7_0.x86_64.rpm b4c0063fd0c97ebf7bc526ef699ad24752b0e776045e5e4625935ad4d3de301c samba-test-4.1.1-37.el7_0.x86_64.rpm a71e33d535eba4fdb3a1f805a57e3f38fd759c9cc3f21ad348d4cb2e20b9813e samba-test-devel-4.1.1-37.el7_0.x86_64.rpm 1bc6a4552df2acf6e994c687197d8f21781ee55e168e3e8de23458da176a7069 samba-vfs-glusterfs-4.1.1-37.el7_0.x86_64.rpm 1b2f1392abdd2f3625e49d19a7cf8ea000171ed7474c776da31e5ff447f2d68e samba-winbind-4.1.1-37.el7_0.x86_64.rpm f98dc2d80bdc989c69c8df6efb7e6c649776a98f8abafb5d3cc02c8dcdc971dd samba-winbind-clients-4.1.1-37.el7_0.x86_64.rpm 748f67e477c152e657344950920ec12e4c2f7a1860fdcd490b240a237c862ffa samba-winbind-krb5-locator-4.1.1-37.el7_0.x86_64.rpm 9ce1a0a2584df28bd6d458744db305327b7b71975a58869896520ccdfe920de3 samba-winbind-modules-4.1.1-37.el7_0.i686.rpm 1eb8793ebaaa21ddd095c9bb9d44ba553851ef6c81d1f5cb3425bdef4169add4 samba-winbind-modules-4.1.1-37.el7_0.x86_64.rpm Source: a612d7cd49e4af813e78bdf8f87e0b7f40af01c0e3f7992e5075069621ce3416 samba-4.1.1-37.el7_0.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 6 Date: Tue, 05 Aug 2014 17:01:05 -0500 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:1008 Important CentOS 7 samba Security Update To: centos-announce(a)centos.org Message-ID: <53E15421.8080107(a)centos.org> Content-Type: text/plain; charset="windows-1252" NOTE: The SUBJ should have been CentOS 7, not CentOS 6 for this update. On 08/05/2014 03:09 PM, Johnny Hughes wrote: > > CentOS Errata and Security Advisory 2014:1008 Important > > Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-1008.html > > The following updated files have been uploaded and are currently > syncing to the mirrors: ( sha256sum Filename ) > > x86_64: > 157af858bf13ec971678a8bf3fc6cb649d577e671edadf3c860723a87c736eab libsmbclient-4.1.1-37.el7_0.i686.rpm > 90ea2064837184635e7d718b854ced1482b78514c35b26a75125242b342316c8 libsmbclient-4.1.1-37.el7_0.x86_64.rpm > 8a02b8e75489ae6972d2dce9cdc641c303903e772913421ad5a0d18ba9b84ecc libsmbclient-devel-4.1.1-37.el7_0.i686.rpm > 7fd666c9b7e9fcae08cfe87a1061de6f6bc70c1fe6f9e3b276e08281faaa74db libsmbclient-devel-4.1.1-37.el7_0.x86_64.rpm > 6d227ef56d9c743db3ef6ca280232c92a7eac8b7ce831dd97d15eb34b4e456fc libwbclient-4.1.1-37.el7_0.i686.rpm > 3b1c4905362c5bded2e3a6b700447adfa16c557a1bed8be96595598ff55f82a1 libwbclient-4.1.1-37.el7_0.x86_64.rpm > 671ca7247062ed71122cd1ec1331edb2c1755f97750ed6f00e13400dd2fcc004 libwbclient-devel-4.1.1-37.el7_0.i686.rpm > 83fe4ef003c71b863ea3ab01e8b04185659bc68d978c2df13125f43306fefd50 libwbclient-devel-4.1.1-37.el7_0.x86_64.rpm > 7183caf7c6dcb326516712ac23575cea0be4e37a012df8cb7b63cf2086f0b397 samba-4.1.1-37.el7_0.x86_64.rpm > 42e79f5eb71b4aa57bc6139067432248e594114cb0539675f8db50f5d6dd7711 samba-client-4.1.1-37.el7_0.x86_64.rpm > 97cf6229313844589418c4575fa572fc080ecd692e188ec5104b4b380723b6f4 samba-common-4.1.1-37.el7_0.x86_64.rpm > 80ad11b7505f5a817d53641187af395a2e91c55001b70266177e8f72129d0716 samba-dc-4.1.1-37.el7_0.x86_64.rpm > 5130c403d7e2e4b9a833ba502a5e81653dde44c0a3899d4babab4108aafcf1c4 samba-dc-libs-4.1.1-37.el7_0.x86_64.rpm > 95b8eae572868aece91f60d4fffe78d9a5d34f047a8a3ffbe974e2b5e3b305cb samba-devel-4.1.1-37.el7_0.i686.rpm > 776351d3c3f934f3edf5fc2dacdac87f39e95d2eb74706e07a867aaf07cc0990 samba-devel-4.1.1-37.el7_0.x86_64.rpm > 25f2c7b50fe3d21e2f2680f61b9ebc06623a6cbf1ed6736887e44082c1d3221e samba-libs-4.1.1-37.el7_0.i686.rpm > 0d22204b7654868a76bc5d86363407e0385040d8c620ca5df003074ba410b1c0 samba-libs-4.1.1-37.el7_0.x86_64.rpm > 25bcaa37576a798026f1d01ba5d2a7c14e4387488d7f90675a9dfd39821769a0 samba-pidl-4.1.1-37.el7_0.x86_64.rpm > 4acd838c767daf12db6e6eb1ff7233d7c1bc08f3dcd84262bf4d4903e3fe4f24 samba-python-4.1.1-37.el7_0.x86_64.rpm > b4c0063fd0c97ebf7bc526ef699ad24752b0e776045e5e4625935ad4d3de301c samba-test-4.1.1-37.el7_0.x86_64.rpm > a71e33d535eba4fdb3a1f805a57e3f38fd759c9cc3f21ad348d4cb2e20b9813e samba-test-devel-4.1.1-37.el7_0.x86_64.rpm > 1bc6a4552df2acf6e994c687197d8f21781ee55e168e3e8de23458da176a7069 samba-vfs-glusterfs-4.1.1-37.el7_0.x86_64.rpm > 1b2f1392abdd2f3625e49d19a7cf8ea000171ed7474c776da31e5ff447f2d68e samba-winbind-4.1.1-37.el7_0.x86_64.rpm > f98dc2d80bdc989c69c8df6efb7e6c649776a98f8abafb5d3cc02c8dcdc971dd samba-winbind-clients-4.1.1-37.el7_0.x86_64.rpm > 748f67e477c152e657344950920ec12e4c2f7a1860fdcd490b240a237c862ffa samba-winbind-krb5-locator-4.1.1-37.el7_0.x86_64.rpm > 9ce1a0a2584df28bd6d458744db305327b7b71975a58869896520ccdfe920de3 samba-winbind-modules-4.1.1-37.el7_0.i686.rpm > 1eb8793ebaaa21ddd095c9bb9d44ba553851ef6c81d1f5cb3425bdef4169add4 samba-winbind-modules-4.1.1-37.el7_0.x86_64.rpm > > Source: > a612d7cd49e4af813e78bdf8f87e0b7f40af01c0e3f7992e5075069621ce3416 samba-4.1.1-37.el7_0.src.rpm > > >

1 0

How to update MySQL with CentOS 6 in most unintrusive way - in regard to perl and PHP packages
by Alexander Farber 06 Aug '14

06 Aug '14

Dear fellow CentOS users, for my few hobby projects (web games + forums) I have been using CentOS 5 (then 6) with Drupal and PostgreSQL plus few custom PHP and Perl scripts written by mysef. Since PostgreSQL version delivered with CentOS package has been a bit dated, I always used the PGDG packages: # rpm -qa | grep -i pgdg pgdg-centos93-9.3-1.noarch postgresql93-9.3.5-1PGDG.rhel6.i686 postgresql93-libs-9.3.5-1PGDG.rhel6.i686 postgresql93-server-9.3.5-1PGDG.rhel6.i686 As a web developer this has been a very pleasant experience, since (by some great magic) all the other CentOS packages (like php-pgsql and perl-DBD-Pg) just worked with the PGDG packages. Now I have decided to switch to WordPress for my new projects and am (sadly) forced to switch the database too: I have to use MySQL or MariaDB with CentOS 6.5. So my question is: if anybody can recommend a similarly comfortable package repository for MySQL/MariaDB - which wouldn't mess up any other CentOS packages and which would update itself (with "yum update"). And please do not suggest something like Fedora or EPEL repositories, because other than for MySQL/MariaDB I would like not to add any additional packages to have my server as "stable" as possible. Thank you for any hints Alex

4 3

CentOS 7 missing package kio_mtp - required for digikam
by Greg Peterson 06 Aug '14

06 Aug '14

Greetings, Has anyone installed digikam-4.0 with yum on CentOS 7? On my CentOS 7 machine "yum install digikam" fails. Apparently "kio_mtp" is not available: greg@tss20:~$ sudo yum install digikam Loaded plugins: fastestmirror, langpacks Loading mirror speeds from cached hostfile * base: ftp.iij.ad.jp * epel: ftp.iij.ad.jp * extras: ftp.iij.ad.jp * updates: ftp.iij.ad.jp Resolving Dependencies --> Running transaction check ---> Package digikam.x86_64 0:4.0.0-3.el7 will be installed --> Processing Dependency: digikam-libs(x86-64) = 4.0.0-3.el7 for package: digikam-4.0.0-3.el7.x86_64 --> Processing Dependency: kio_mtp for package: digikam-4.0.0-3.el7.x86_64 --> Processing Dependency: libdigikamdatabase.so.4.0.0()(64bit) for package: digikam-4.0.0-3.el7.x86_64 --> Processing Dependency: libdigikamcore.so.4.0.0()(64bit) for package: digikam-4.0.0-3.el7.x86_64 --> Running transaction check ---> Package digikam.x86_64 0:4.0.0-3.el7 will be installed --> Processing Dependency: kio_mtp for package: digikam-4.0.0-3.el7.x86_64 ---> Package digikam-libs.x86_64 0:4.0.0-3.el7 will be installed --> Finished Dependency Resolution Error: Package: digikam-4.0.0-3.el7.x86_64 (epel) Requires: kio_mtp You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest greg@tss20:~$ greg@tss20:~$ sudo yum deplist digikam [sudo] password for greg: Loaded plugins: fastestmirror, langpacks Loading mirror speeds from cached hostfile * base: ftp.iij.ad.jp * epel: ftp.iij.ad.jp * extras: ftp.iij.ad.jp * updates: ftp.iij.ad.jp package: digikam.x86_64 4.0.0-3.el7 dependency: /bin/sh provider: bash.x86_64 4.2.45-5.el7 dependency: /usr/bin/perl provider: perl.x86_64 4:5.16.3-283.el7 dependency: digikam-libs(x86-64) = 4.0.0-3.el7 provider: digikam-libs.x86_64 4.0.0-3.el7 dependency: kcm_colors provider: kcm_colors.x86_64 4.10.5-18.el7 dependency: kde-runtime >= 4.10.5 provider: kde-runtime.x86_64 4.10.5-8.el7 provider: kde-runtime.i686 4.10.5-8.el7 dependency: kio_mtp Unsatisfied dependency ... [output deleted] Fedora 20 on another machine has a "kio_mtp" package: kio_mtp.x86_64 0.75-4.20131020git2063e75.fc20 greg@tpt510-home:~$ yum deplist digikam ... [output deleted] dependency: kio_mtp provider: kio_mtp.x86_64 0.75-4.20131020git2063e75.fc20 ... [output deleted] Is the package "kio_mtp.x86_64" available somewhere? Thanks. - Greg Peterson

2 2

[OT] Leveno HDD caddies
by James B. Byrne 05 Aug '14

05 Aug '14

This is very off topic but, I have no idea where else to ask. We obtained some used Leveno CTO7483 desktop units for experimentation. I had intended to install CentOS-7 on one of them. As they arrived with a vendor upgraded Windows 7ProSP1 install without media I decided to pull the disk drive and install onto a spare drive that I installed. Those of you with any experience with this model computer or its family can tell where this is going. Basically, the disk drive module for these things is disposable. The HDD is enclosed in a removable caddy but is welded to it. You can only replace the HDD with a pre-mounted HDD in yet another caddy, which item is available only from Leveno. My question is: Does anyone here know of a source for an after-market caddy that fits these machines ad which allows one to install a standard low profile 3.5 inch SATA HDD? My google-fu has failed in my attempts, but that may becuse I have no idea how to phrase a search for this situation. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

10 14

reset CentOS-7 lost root password
by Bonnie B Mtengwa 05 Aug '14

05 Aug '14

Hie I lost my CentOS 7 root password, so I tried booting the OS in single user mode but it prompts me for the root password when the system boots, Any ideas? Regards Bonnie

4 5

CentOS-announce Digest, Vol 114, Issue 2
by centos-announce-request＠centos.org 05 Aug '14

05 Aug '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2014:0996 CentOS 6 nfs-utils-lib Update (Karanbir Singh) 2. CEBA-2014:0997 CentOS 6 vsftpd Update (Karanbir Singh) 3. CEBA-2014:0998 CentOS 6 log4cpp Update (Karanbir Singh) ---------------------------------------------------------------------- Message: 1 Date: Mon, 4 Aug 2014 23:53:50 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0996 CentOS 6 nfs-utils-lib Update To: centos-announce(a)centos.org Message-ID: <20140804235350.GA64736(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0996 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0996.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: dd71486d9a7cad80ea0fa562d87729067c397dc4d1dc7361b1ebcfb92b51d927 nfs-utils-lib-1.1.5-6.el6_5.i686.rpm 98c215fec8f591560f4928f27eb4043cebc564a70f12e8f1a3bc19f603498eba nfs-utils-lib-devel-1.1.5-6.el6_5.i686.rpm x86_64: dd71486d9a7cad80ea0fa562d87729067c397dc4d1dc7361b1ebcfb92b51d927 nfs-utils-lib-1.1.5-6.el6_5.i686.rpm 61db894b44ce3580c4f8fa9f5847ab824da144e6ad582199675c4fb10eb15641 nfs-utils-lib-1.1.5-6.el6_5.x86_64.rpm 98c215fec8f591560f4928f27eb4043cebc564a70f12e8f1a3bc19f603498eba nfs-utils-lib-devel-1.1.5-6.el6_5.i686.rpm fe544e142e31baca6c8241cf099ea0deaa035ce3ac4a22cacd5e2230e219f4cd nfs-utils-lib-devel-1.1.5-6.el6_5.x86_64.rpm Source: fc606b69cf8e4fac59e3b89a346ac32e148882b0ee603871cbe209b06d25571d nfs-utils-lib-1.1.5-6.el6_5.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Tue, 5 Aug 2014 00:00:52 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0997 CentOS 6 vsftpd Update To: centos-announce(a)centos.org Message-ID: <20140805000052.GA9396(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0997 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0997.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 26150f0443d95a3a5c365b36b3e4bde00f7cff59c5db3b3e3be876e61bff50bc vsftpd-2.2.2-12.el6_5.1.i686.rpm x86_64: 54994e2c3989080a0f406f80257c26e28a226d25f39e655b020991fa989afd8a vsftpd-2.2.2-12.el6_5.1.x86_64.rpm Source: 486f755460feb43f7a82e509c76cc831d5f9875a603637e2c20560df38d4252f vsftpd-2.2.2-12.el6_5.1.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Tue, 5 Aug 2014 00:01:28 +0000 From: Karanbir Singh <kbsingh(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0998 CentOS 6 log4cpp Update To: centos-announce(a)centos.org Message-ID: <20140805000128.GA9644(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0998 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0998.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 71e97ffad8411de2b792f65efcdbc4692b0fecf17bc164ded045e4612a7195a1 log4cpp-1.0-13.el6_5.1.i686.rpm a0bccb1f6109e1faafe48c724984c8a878c9213f4aff3f53ea5e91cea4be162c log4cpp-devel-1.0-13.el6_5.1.i686.rpm x86_64: 71e97ffad8411de2b792f65efcdbc4692b0fecf17bc164ded045e4612a7195a1 log4cpp-1.0-13.el6_5.1.i686.rpm 026e0dcb2f4f69a8717d3bbbf465d09a63dfcb846820b42d0d09ff6208f7e382 log4cpp-1.0-13.el6_5.1.x86_64.rpm a0bccb1f6109e1faafe48c724984c8a878c9213f4aff3f53ea5e91cea4be162c log4cpp-devel-1.0-13.el6_5.1.i686.rpm 0f7c2f3b0c0ad7add8df8867d745e31057a591199a1aff6f82ccb7635ad16810 log4cpp-devel-1.0-13.el6_5.1.x86_64.rpm Source: fe5593834dcc482b6b825138acf9556d31c73e5d1149991b7a6ab39b99b8d990 log4cpp-1.0-13.el6_5.1.src.rpm -- Karanbir Singh CentOS Project { http://www.centos.org/ } irc: z00dax, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 114, Issue 2 ***********************************************

1 0

Re: [CentOS] UC reset CentOS-7 lost root password
by Rushton Martin 05 Aug '14

05 Aug '14

A live DVD or memory stick version of any recent Linux distro will allow you to boot. You can then mount the original disk as, say, /mnt. Go to /mnt/etc and edit the root password to be null or cut-and-paste a known password in. Reboot and set it. >Hie > >I lost my CentOS 7 root password, so I tried booting the OS in single user mode >but it prompts me for the root password when the system boots, > >Any ideas? > >Regards > >Bonnie This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. QinetiQ may monitor email traffic data and also the content of email for the purposes of security. QinetiQ Limited (Registered in England & Wales: Company Number: 3796233) Registered office: Cody Technology Park, Ively Road, Farnborough, Hampshire, GU14 0LX http://www.qinetiq.com.

1 0

What's the point of 'service mysqld reload'?
by Martin Božič 05 Aug '14

05 Aug '14

Hi, I've been looking at /etc/init.d/mysql init script and saw that 'reload' spits out just 'exit 3' and doesn't actually do anything else. I'm talking here about stock MySQL on CentOS 6.5. What's the reason to do this? It seems quite misleading! Regards, Martin

2 1

don't use centos 7 as a developer workstation
by Farkas Levente 04 Aug '14

04 Aug '14

Hi, May be it's not clear to everyone.. so this's just a quick notice to everyone. Don't use CentOS 7 as a developer workstation since currently there is not included any developer IDE. As eclipse was pulled out from the main distro and put into Red Hat Developer Toolset (which is imho a good idea not to use a 7 years old IDE). But Red Hat Developer Toolset is still not supported on rhel7 this means currently you have to install eclipse and all other packages from RHDT. Anyway RH said it will be supported... Regards. -- Levente "Si vis pacem para bellum!"

5 4

Re: [CentOS] don't use centos 7 as a developer workstation
by Farkas Levente 04 Aug '14

04 Aug '14

On 08/03/2014 01:27 PM, Reindl Harald wrote: > > > Am 03.08.2014 um 13:19 schrieb Farkas Levente: >> May be it's not clear to everyone.. so this's just a quick notice >> to everyone. Don't use CentOS 7 as a developer workstation since >> currently there is not included any developer IDE. As eclipse was >> pulled out... > > what a nonsense > > i am using Fedora and guess what - Eclipse package the last 7 years > lives uner /usr/local/ and not from the repos > > if one can't install an IDE because it is not in the repos he > likely has no developer qulifications anyways if one can't build and install a linux os because it is not in the repos he likely has no developer qualifications anyways:-) i already build and install a few (!?), but still like to install everything from rpm and not mess the whole os with packages and files like on windows.. -- Levente "Si vis pacem para bellum!"

2 1

Multi-Seat using Thin Clients
by Aaron Siegel 04 Aug '14

04 Aug '14

Hello I have been wanting to set up a multi-seat system built around my linux desktop. Several years ago I set up a multi-seat system using X11. It difficult to setup and cause many different system errors. My new desktop supports VT-d but the VGA passthru is still too experimental for me at this point. I have looked at the USB display link but sounds like there is a performance issue with Linux driver. I would prefer a Ethernet based thin client. I want to setup one or two thin clients that will connect to my Centos desktop for my home. Does anyone have any suggestion. At this point I will be satisfied with Linux terminals maybe windows in the future but I think there are some licensing issues. I have been prefer KVM for vitalization over xen. Thank you Aaron

2 1

How to install minimal KDE
by Gabor Boros 01 Aug '14

01 Aug '14

Hi, I want to install minimal KDE on minimal CentOS 7 installation. How can I do this? Gabor

3 4

Re: [CentOS] /etc/sysconfig/modules replacement in EL7?
by Ian Pilcher 01 Aug '14

01 Aug '14

On 08/01/2014 09:49 AM, Reindl Harald wrote: > > /etc/modprobe.d/ > /etc/modules-load.d/ > > are your friend and if you *really* need bash-stuff > just create a shell script and put it in it's own > systemd-unit with Type=oneshot > /etc/modules-load.d is what I was looking for. Thanks! -- ======================================================================== Ian Pilcher arequipeno(a)gmail.com -------- "I grew up before Mark Zuckerberg invented friendship" -------- ========================================================================

1 0

/etc/sysconfig/modules replacement in EL7?
by Ian Pilcher 01 Aug '14

01 Aug '14

Anyone found/know of a replacement for /etc/sysconfig/modules in RHEL/ CentOS 7? -- ======================================================================== Ian Pilcher arequipeno(a)gmail.com -------- "I grew up before Mark Zuckerberg invented friendship" -------- ========================================================================

1 0

question about etcd.conf
by Steve Ma 01 Aug '14

01 Aug '14

Hi, guys: I have installed coreos on three bare metal machines to form a cluster. I added /etc/etcd/etcd.conf to each machine according to the instruction in https://github.com/coreos/etcd/blob/master/Documentation/configuration.md however, when I do sudo systemctl start etcd, it keep start the etcd with "default" as name (although I set the name to be different in etcd.conf), and also whenever I start etcd with etcd.conf, the fleet have trouble communicate with etcd, and keep give me error "attempting to check latest fleet version in Registry: 501..." help please sincerely Steve

1 0

CentOS-announce Digest, Vol 114, Issue 1
by centos-announce-request＠centos.org 01 Aug '14

01 Aug '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. CEBA-2014:0945 CentOS 6 mutt FASTTRACK Update (Johnny Hughes) 2. CEBA-2014:0948 CentOS 6 aide FASTTRACK Update (Johnny Hughes) 3. CEBA-2014:0992 CentOS 6 libvirt Update (Johnny Hughes) 4. CEEA-2014:0993 CentOS 6 ca-certificates Update (Johnny Hughes) 5. CESA-2014:0981 Important CentOS 6 kernel Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Thu, 31 Jul 2014 19:27:20 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0945 CentOS 6 mutt FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20140731192720.GA26999(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0945 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0945.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 9a43ce3aee834f0a1c1dcf4ef6dafd600b6dae94653c9f950c194258906d295f mutt-1.5.20-7.20091214hg736b6a.el6.i686.rpm x86_64: b22d8185a4fe76689b9f64e9a909fe2ab47f045d0ebea8fc83890c3db2ae1e31 mutt-1.5.20-7.20091214hg736b6a.el6.x86_64.rpm Source: 0a74d631991d60e36529c9066da3c4a7609f10e05f5ce3bbb0571d2e1318ffa4 mutt-1.5.20-7.20091214hg736b6a.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 2 Date: Thu, 31 Jul 2014 19:27:53 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0948 CentOS 6 aide FASTTRACK Update To: centos-announce(a)centos.org Message-ID: <20140731192753.GA27190(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0948 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0948.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: d4286ed601702ca38db7688ff6c509e0ecd491c173e149546e20f9252e3012f2 aide-0.14-7.el6.i686.rpm x86_64: 045bff3612d5ba662378f0ab480af3fc5bd80238070ebb725dbd62866c7fb00a aide-0.14-7.el6.x86_64.rpm Source: 0920e91436125d28c6cdfec4ec17c7959ddb18ad67ccfe808687794d4a03a817 aide-0.14-7.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Thu, 31 Jul 2014 19:55:21 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0992 CentOS 6 libvirt Update To: centos-announce(a)centos.org Message-ID: <20140731195521.GA28247(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0992 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0992.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: b943273022a38b12a4d77817390e77d65e202870f3e52abe0ae2eba19c2d2b17 libvirt-0.10.2-29.el6_5.11.i686.rpm 66523e30591555196332482d684fbec15db3cbb70745e47e932ee8510168dd85 libvirt-client-0.10.2-29.el6_5.11.i686.rpm 97b84729f4860e77a34ec29c8e8882d6ac721338f791c2e6dea56dcf3c6d1281 libvirt-devel-0.10.2-29.el6_5.11.i686.rpm ee9f37610e7b353ae7f014ab58e859c2cdd9e8cc866a358ca2a03f82121453e4 libvirt-python-0.10.2-29.el6_5.11.i686.rpm x86_64: 6f2eb655c55a5383c06b02a3e466f70296c02ee7b45ff7283d69a5ae385733cd libvirt-0.10.2-29.el6_5.11.x86_64.rpm 66523e30591555196332482d684fbec15db3cbb70745e47e932ee8510168dd85 libvirt-client-0.10.2-29.el6_5.11.i686.rpm 083762a31d65ed05edb7634192bed9efd75334599f7438e388593e49e1a11b49 libvirt-client-0.10.2-29.el6_5.11.x86_64.rpm 97b84729f4860e77a34ec29c8e8882d6ac721338f791c2e6dea56dcf3c6d1281 libvirt-devel-0.10.2-29.el6_5.11.i686.rpm 20a31b0c6e5a3bcd023327d4d314f09e479ae63ff6859db8f051baa656dafc33 libvirt-devel-0.10.2-29.el6_5.11.x86_64.rpm b5faf33c5c0f7539f01977c9cdc184d0b89937caa119da47caf325b4005461f5 libvirt-lock-sanlock-0.10.2-29.el6_5.11.x86_64.rpm 479de0cf9cb3c2228a6a20f1a4260a8d06d75e43a1d8269c9b6c1e307efc589c libvirt-python-0.10.2-29.el6_5.11.x86_64.rpm Source: 2475522a3a931d6669d380df0578dc6df62c9aefe881e36cba7a3b07eecdda1c libvirt-0.10.2-29.el6_5.11.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Thu, 31 Jul 2014 19:56:43 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2014:0993 CentOS 6 ca-certificates Update To: centos-announce(a)centos.org Message-ID: <20140731195643.GA28345(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2014:0993 Upstream details at : https://rhn.redhat.com/errata/RHEA-2014-0993.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 8b32dc0749f753398c90ecab91179f709cd137d4a3a14e30e5e5111977bba350 ca-certificates-2014.1.98-65.0.el6_5.noarch.rpm x86_64: 8b32dc0749f753398c90ecab91179f709cd137d4a3a14e30e5e5111977bba350 ca-certificates-2014.1.98-65.0.el6_5.noarch.rpm Source: 450b27629d41b8dd0de9260b8b870609eccab071ee67018d64102fed8cbee626 ca-certificates-2014.1.98-65.0.el6_5.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Thu, 31 Jul 2014 19:57:06 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CESA-2014:0981 Important CentOS 6 kernel Update To: centos-announce(a)centos.org Message-ID: <20140731195706.GA28489(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Security Advisory 2014:0981 Important Upstream details at : https://rhn.redhat.com/errata/RHSA-2014-0981.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a33fddc2c29ed4fa890c0673d351cada355b6595aa7e4119691c47c539f719a0 kernel-2.6.32-431.23.3.el6.i686.rpm bfaf02c06dca59985d2466e06de9ca924a1bac24589978a12d8ea74047540698 kernel-abi-whitelists-2.6.32-431.23.3.el6.noarch.rpm 0896c8aadb4e7804de75cb08f4ef2b608d0ce8a46d08eeb2992117700a3bb3ba kernel-debug-2.6.32-431.23.3.el6.i686.rpm a636480b39b1ad3ca68bc551dc064e4fa73ca00e2d78882af64a132a2b6538f2 kernel-debug-devel-2.6.32-431.23.3.el6.i686.rpm 8f3780d92e3d93e393493acf7e5a96f48b579ac0d13512f32d0704e22fcf8806 kernel-devel-2.6.32-431.23.3.el6.i686.rpm 4ea181b90c3b96a04afaa6384a781c635ef6d1f4f4522c6fea171ea95a270c6f kernel-doc-2.6.32-431.23.3.el6.noarch.rpm 0e61c8998a6e8824c97321c50a4a63067dfbf40088cd4a3d7e4c4c714c24b812 kernel-firmware-2.6.32-431.23.3.el6.noarch.rpm f902714e0725651132f1bd0178f4cfeff2cf41b73ac99a5cab378545aba8000f kernel-headers-2.6.32-431.23.3.el6.i686.rpm e34b9965937e87f29b7adea548b6bc084b9c37844933b23ba9e4c377e3d5fd08 perf-2.6.32-431.23.3.el6.i686.rpm 0b13896d8453db79b410bafaca2473b6aa477152148796a1ba157d41fc985b18 python-perf-2.6.32-431.23.3.el6.i686.rpm x86_64: 86369f48087131b2ef554871c44ff342b37577be3d0878ce2ae001a404be0b6c kernel-2.6.32-431.23.3.el6.x86_64.rpm bfaf02c06dca59985d2466e06de9ca924a1bac24589978a12d8ea74047540698 kernel-abi-whitelists-2.6.32-431.23.3.el6.noarch.rpm 820424f2da378c70b7cfb56ec797d489d5b35f23eb48df5566246c31e1ed29d0 kernel-debug-2.6.32-431.23.3.el6.x86_64.rpm 6418fc38647218c6c12d1567416dfcb664d60a3e6911043025b70ab1dd7feb09 kernel-debug-devel-2.6.32-431.23.3.el6.x86_64.rpm a78e8517118353d53ec5cfca44c26478b5f8184ee1348d2f1f575149a76164d5 kernel-devel-2.6.32-431.23.3.el6.x86_64.rpm 4ea181b90c3b96a04afaa6384a781c635ef6d1f4f4522c6fea171ea95a270c6f kernel-doc-2.6.32-431.23.3.el6.noarch.rpm 0e61c8998a6e8824c97321c50a4a63067dfbf40088cd4a3d7e4c4c714c24b812 kernel-firmware-2.6.32-431.23.3.el6.noarch.rpm bee8e2f94872dec215ad7432fe6bac82234d164b43cf7c4e23fa689f1f3aba37 kernel-headers-2.6.32-431.23.3.el6.x86_64.rpm 4f1afc1e3642e344c0c6de139df775766a378cdd23fb414d4c98b536c1c85485 perf-2.6.32-431.23.3.el6.x86_64.rpm 65e302b3eb3b761ddaec42a4a22b4fd44747ee34414e38d7664d648b43bdc572 python-perf-2.6.32-431.23.3.el6.x86_64.rpm Source: 1c3c8ed232cc3dead9f50dd2b1a06398eb9b1ce7621f14ad993c6f00db269aa6 kernel-2.6.32-431.23.3.el6.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 114, Issue 1 ***********************************************

1 0

Re: [CentOS] wget: unable to resolve host address “xxxxx”
by Guy Harrison 01 Aug '14

01 Aug '14

On Wednesday 30 July 2014 15:40:56 Theodore Si wrote: > But how? Could you be more specific? > I am using NAT to connect my virtual machine to the Internet. We need more information off you. What kind of vmware? What host platform? What Centos? What is your exact 'wget' command & failure message? It may be a vmware problem in which case you may need to ask there. However (iirc) vmnet0 (bridged), vmnet1 (host-only) and vmnet8 (nat) are common psuedo network devices installed. Nat should work out of the box but note is effectively using whatever DNS is configured for the host. However, the fact other tools work, would, in the first instance, imply a problem with 'wget' usage. > 于2014年7月30日 22:39:04,Devin Reade写到: > >> On Jul 29, 2014, at 23:47, Gopu Krishnan <gopukrishnantec(a)gmail.com> > >> wrote: > >> > >> try adding google dns > >> 8.8.8.8 > >> in resolv.conf > > > > His IP is in private address space; google nameservers won't help. The > > correct answer is to fix his local DNS config. > > _______________________________________________ > > CentOS mailing list > > CentOS(a)centos.org > > http://lists.centos.org/mailman/listinfo/centos > > _______________________________________________ > CentOS mailing list > CentOS(a)centos.org > http://lists.centos.org/mailman/listinfo/centos

2 1

problem running grub during boot
by srikanth chakravarthula 01 Aug '14

01 Aug '14

Hi We are getting the below error while running the below grub command during boot time. grub --batch --no-floppy <<EOF >> $LOGFILE 2>&1 root (hd0,0) setup (hd0) EOF restorecon -v /sbin/grub >>$LOGFILE 2>&1 *grub: asmstub.c:234: grub_stage2: Assertion `simstack_alloc_base != ((void *) -1)' failed* this works fine when run after the boot. we tried disabling selinux and changing enforcing as well but we get the same above error. What could be the issue and how to resolve the above error during boot time. Regards, Srikanth

1 0

Query regarding grub.conf in centos 6.5 iso
by aravind J 01 Aug '14

01 Aug '14

Hello Greetings, I am trying to customize centos 6.5 iso and have few questions. I can't get the significance of grub.conf inside the isolinux folder. I thought it would be used by anaconda to generate /etc/grub.conf. But it seems that is not the case. I tried to make some changes to it, which haven't had any effect in /etc/grub.conf. So, may I ask what is the usage of that grub.conf in the iso? And how can I alter the /etc/grub.conf that is getting generated by anaconda ( I don't want to manually edit it, but I want to add some extra configurations to it as part of installation) Kindly correct me if I have misunderstood anything. Thanks & Regards, Aravind

2 2

dlink ethernet pci card not detected
by Sathish Kumar 31 Jul '14

31 Jul '14

my d-link ethernet pci card not detected in centos 7 even after i have installed kmod forcedth driver.. output of lscpi -nn 01:07.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105/VT6106S [Rhine-III] [1106:3106] (rev 8b) pl help with regards.. sathish

2 2

SOLVED: Centos 7: printing four copies with Libreoffice prints garbage
by Frank Cox 31 Jul '14

31 Jul '14

After much head scratching and throwing most of a ream of paper into the trash, I just found and solved the problem. Thinking that perhaps I have a cable issue, I was re-seating the usb cable that connects my Xerox Phaser 3250 printer to the computer and realized that the printer was plugged into a USB 3.0 port on my computer. When I moved it to a USB 2.0 port, the printer immediately started working properly using the Xerox Phaser 3150 driver that comes with cups, just like it always did under Centos 6. The computer must have been pushing data to the printer too quickly over the USB 3.0 port; the printer got a garbled postscript instruction and everything went downhill from there. Now I'm pretty happy -- my printer works again. I've taped a note to the printer to be damn sure that I remember to always plug it into a USB 2.0 port in the future. -- MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com

4 3

using Red Hat site for documentation
by Adrian Buciuman 31 Jul '14

31 Jul '14

Hi, Is using Red Hat site for documentation legal? If I understand correctly you have to be a customer of Red Hat to be allowed to use their bandwidth: https://access.redhat.com/help/terms/ "2. Terms Applicable to Red Hat Content. In order to access a Red Hat Portal and Red Hat Content, you must be a current Customer of Red Hat or its affiliates [.......] "Some Red Hat Content may have additional terms, license agreements, privacy terms, export terms, subscription agreements, or other terms and conditions ("Additional Terms") that apply to your access to or use of the applicable Red Hat Content. In the event of a conflict, inconsistency, or difference between these Terms of Use and the Additional Terms, the Additional Terms will control. [........] 6. Use of Content. Red Hat grants you a personal, non-assignable license to use Red Hat Content for your own internal use while you are a Red Hat Customer (as defined in Section 2 above). Distributing any portion of Red Hat Content to a third party, using any Red Hat Content for the benefit of a third party, or using Red Hat Content in connection with software other than Red Hat Software under an active Red Hat subscription are all prohibited. Red Hat authorizes you to display on your computer, download, play, and print the Red Hat Content provided: (a) the copyright notice is not removed, (b) Red Hat Content is not be altered, (c) Red Hat Content is used only for your personal, educational, and non-commercial use in support of your active valid subscriptions to Red Hat products and services and in accordance with your Customer Agreement, (d) you do not further redistribute or copy Red Hat Content, and (e) you comply with any Additional Terms. In the event of a conflict, inconsistency, or difference between this Section 6 and the terms of a License or Customer Agreement, the License or Customer Agreement will control (for example, for Red Hat Content licensed under a Creative Commons License, you will have the rights set forth in the applicable Creative Commons License)." --------------------------- The way I understand it, most RHEL documentation has a more permissive license, like CC-BY-SA: http://creativecommons.org/licenses/by-sa/3.0/ and can be redistributed under certain conditions. However, the terms of use still apply to using the Red Hat websites (=bandwidth). But if someone is a Red Hat customer, he can legally access the site, fetch the documentation and redistribute it to everyone. Since RHEL and CentOS are now collaborating, can they sort out this issue? Thanks, Adrian Buciuman

10 12

CentOS6: sound prefs, how to limit output volume to the un-amplified range?
by wwp 31 Jul '14

31 Jul '14

Hello there, recently installed CentOS6 on a (quite old) 64-bit system, and from the GNOME's sound preference app, I can see that the Output volume range is said "amplified" from 63% to 100%. Below 63% it's unamplified. No idea what's implied behind this amplification (I don't see this on other desktops), but I notice that when "amplified" the sound is pretty bad (at 100% and above, it's ridiculously bad). Below 63% it's simply very good and from far, loud enough. I wonder if there's a way to make the amplified range (63-100+) inaccessible? It makes no sense to me to allow the amplified range if it sounds bad (tested with different external speakers). lspci says, about the device: 00:14.5 Multimedia audio controller: Advanced Micro Devices, Inc. [AMD/ATI] IXP SB400 AC'97 Audio Controller (rev 02) Subsystem: Hewlett-Packard Company Device 2a2f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min), Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Kernel driver in use: ATI IXP AC97 controller Kernel modules: snd-atiixp More info about this sound config from alsa-info: http://www.alsa-project.org/db/?f=0d3c6aa7d09515bb9499c97e977ff8988ea8a4cb Regards, -- wwp

1 0

How to compile APUE code on centos 6.X
by Theodore Si 31 Jul '14

31 Jul '14

Hi all, I want to compile the source code of Advanced Programming in the Unix Environment(APUE) 3rd edition, and I encountered some difficulties. After executing "make", I got this message: gcc -ansi -I../include -Wall -DLINUX -D_GNU_SOURCE barrier.c -o barrier -L../lib -lapue -pthread -lrt -lbsd /tmp/cc0gG99O.o: In function `thr_fn': barrier.c:(.text+0x6e): undefined reference to `heapsort' collect2: ld returned 1 exit status make[1]: *** [barrier] Error 1 make[1]: Leaving directory `/home/drizzlex/apue.3e/threads' make: *** [all] Error 1 In barrier.c, I found this #ifdef SOLARIS #define heapsort qsort #else extern int heapsort(void *, size_t, size_t, int (*)(const void *, const void *)); #endif If I change these code to How to install libbsd to solve this problem on CentOS (this works on Ubuntu)?

3 11

CentOS-announce Digest, Vol 113, Issue 13
by centos-announce-request＠centos.org 31 Jul '14

31 Jul '14

Send CentOS-announce mailing list submissions to centos-announce(a)centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request(a)centos.org You can reach the person managing the list at centos-announce-owner(a)centos.org When replying, please edit your Subject line so it is more specific than "Re: Contents of CentOS-announce digest..." Today's Topics: 1. Docker Index image builds updated to 20140726 (Jim Perrin) 2. CEBA-2014:0947 CentOS 7 cronie FASTTRACK BugFix Update (Johnny Hughes) 3. CEBA-2014:0946 CentOS 7 unzip FASTTRACK BugFix Update (Johnny Hughes) 4. CEBA-2014:0989 CentOS 7 systemd BugFix Update (Johnny Hughes) 5. CEEA-2014:0990 CentOS 6 xorg-x11-drv-synaptics Enhancement Update (Johnny Hughes) ---------------------------------------------------------------------- Message: 1 Date: Wed, 30 Jul 2014 11:16:35 -0500 From: Jim Perrin <jperrin(a)centos.org> Subject: [CentOS-announce] Docker Index image builds updated to 20140726 To: centos-announce(a)centos.org Message-ID: <53D91A63.3050103(a)centos.org> Content-Type: text/plain; charset=ISO-8859-1 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 The CentOS images included in the docker index have been bumped to build 20140726. Fixes ===== This update resolves: 1. glibc locale errors for non-root users and applications for both CentOS-6 and CentOS-7. 2. libselinux multilib errors on some yum install actions for CentOS-6. 3. iputils and iproute are now included in the base install. 4. Includes recent updates current to 20140726. Usage ===== If you are using the CentOS images from the docker index, please run 'docker pull centos' to get the updates. After updating, you may need to rebuild your application images. Additional Information ====================== For detailed information or to see the code differences used in building the images, please see https://github.com/CentOS/sig-cloud-instance-build - -- Jim Perrin The CentOS Project | http://www.centos.org twitter: @BitIntegrity | GPG Key: FA09AD77 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAEBAgAGBQJT2RpiAAoJEBbHyC76Ca13XxoP/2wWyNPec+K2pdjdW4odFqUv 0YH+G1kfAocTOJL+rjTCrH4mp2TvijEwgk6F9zfXgYS/Orb32KOIbtDepYlhH6oU 2VohgkxdbSjLqptp7tDQuee4fmRmz+YCgfl2C6HXAoIRFA2VEf+At+83RgV3kQgq /yVE7eJuXoDsqw+hT2rI+hibhZm6IrAf0VWbOVnvrXAz6kGKrY7jnNMGfyUaboQv axTryFCy3G6dmlbuN9ojeNX108GsXXys9LE8/ODTji5CY+90IM0h/gNVzmIkYmjK NqC7w+DUVoB/1DYMPMGTZ0DiDWwsjbRJOQ28vwfm8CzpNdzvHJOCQqQkR3sNMvQn gp/ypFSQNWKiAs1shkW5FYPsn5q2VU7QchqLDTUZeDaEuxq3oYfuBnQH1sOW8v8W OSSPJTF6j76Lc/iBwHDVRhVJGAiux1V/uaMrdH3TqQEZMKw7SmsCNhNBFQITbGgq 7GMyecM2r6s+eX9O6Rf/jkHveimxoDPa+Z4OcGfPpMD1tZg/zjFse0aQnhn8tjp7 DNiSt3SatBlMfU/wzc0FL9iNVGiq3U22XZZYMQ1ntE5FA+mFDzepGY2GP3cTdBHA CdufkMz77HiAAfIpsD0CF8VnjQcqJWBfnribD5AkJNAjJGXfteiz2Gti5TImPzJb k3A6cEqPXaqn5Ztqdwzi =vglE -----END PGP SIGNATURE----- ------------------------------ Message: 2 Date: Wed, 30 Jul 2014 18:23:53 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0947 CentOS 7 cronie FASTTRACK BugFix Update To: centos-announce(a)centos.org Message-ID: <20140730182353.GA51635(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0947 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0947.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 64e6270ac3f7e319c370c4851115ca21e2626fba4a79de3aff88edb8ef509def cronie-1.4.11-13.el7.i686.rpm ef6ef700df6fc0b77f4a27dabdd9bf95fe3573953c4e4757add56dfb668ad715 cronie-1.4.11-13.el7.x86_64.rpm e936841a571b648394665b81759c6446f97d2991662ee5df7c1dd18a6035cb0b cronie-anacron-1.4.11-13.el7.i686.rpm 89d5b58600efddc0ca286433f7741b187076a5011c893d0f11cd0b53c7aea712 cronie-anacron-1.4.11-13.el7.x86_64.rpm 52fad07fd35781428c58cc71432aa4e1d1c341d6ed36043325fa4073ea7a514e cronie-noanacron-1.4.11-13.el7.i686.rpm 7cf0f0e26829988c3b79be4505bf73dbabbf6ba68c67010a6b53ab76e683bdd9 cronie-noanacron-1.4.11-13.el7.x86_64.rpm Source: 4e0d4e019cc32c1679a2b1d09bfd171082b11898323ad32d13a03bd441a08b51 cronie-1.4.11-13.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 3 Date: Wed, 30 Jul 2014 18:24:34 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0946 CentOS 7 unzip FASTTRACK BugFix Update To: centos-announce(a)centos.org Message-ID: <20140730182434.GA51715(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0946 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0946.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 2fffce30bede69193adc468a44f83275b72106082c5a7bde37b37fc953e85fbd unzip-6.0-14.el7.i686.rpm c9ed7221ad9f6814c44970ac2afa435a2e092a7b7d70ad614d56820b19a15154 unzip-6.0-14.el7.x86_64.rpm Source: c6f24e45734be959a29f8c746cf20c73641a88f730d7eacce0ff0acfa0a6eeba unzip-6.0-14.el7.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 4 Date: Wed, 30 Jul 2014 18:24:51 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEBA-2014:0989 CentOS 7 systemd BugFix Update To: centos-announce(a)centos.org Message-ID: <20140730182451.GA51821(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Bugfix Advisory 2014:0989 Upstream details at : https://rhn.redhat.com/errata/RHBA-2014-0989.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: fda4a49fa241de2f9e8c658eea0af652d06cc8057829f23523b2daacf6218f35 libgudev1-208-11.el7_0.2.i686.rpm 873ebf7ecc365eed0d4e88ffd99ff334e218cd9af74df4440479822a4db8eb7d libgudev1-208-11.el7_0.2.x86_64.rpm 2fa8960386331687d840e0e9866187702c119fc138c8bde9104f8ac59a7b65a5 libgudev1-devel-208-11.el7_0.2.i686.rpm d39540a22eb1a8fd9be477e5d357a56e323e11ac230cbf7abd58badf53628dcc libgudev1-devel-208-11.el7_0.2.x86_64.rpm 228860724648cc4087e960e2520640c373a64a9bf928625a2da4e88f9bafa20e systemd-208-11.el7_0.2.i686.rpm b7e09b24a7d3bf9fa1703c435537cef8d28363baa25fa29b611b4452b223de30 systemd-208-11.el7_0.2.x86_64.rpm 5c9932d0d13dea9260e1f34044f52cfaf3d3d28314091f2bcd3295b69c37520f systemd-devel-208-11.el7_0.2.i686.rpm 15bd748eff9ef524528758aec6308e827e201dbdaa7159ff10acc7885566fc38 systemd-devel-208-11.el7_0.2.x86_64.rpm 23c1a65b3f6c9999e226fd0d64454ba401dc960a1e38b50f624189494ec05b89 systemd-journal-gateway-208-11.el7_0.2.i686.rpm e683bcf4c0432c313c0cce46cfc6503e51f0101bd602405ac87fd5da8c0be7b9 systemd-journal-gateway-208-11.el7_0.2.x86_64.rpm 8068ed0f3555e39cf6d82d7817117b51326e5d537a50b3d28d5971f5db6e5413 systemd-libs-208-11.el7_0.2.i686.rpm faa0804ee60a61494e7319bef72613bffe755c2b5888106aff004d9b780f5735 systemd-libs-208-11.el7_0.2.x86_64.rpm 4b981398256ef43d4e94280f86b09bd5318441b971bfa19eb7e1128845bc8946 systemd-python-208-11.el7_0.2.i686.rpm d039620dd1338b4fc2b7636e163f084052375ef9a9d4e18405ff922fff8806f1 systemd-python-208-11.el7_0.2.x86_64.rpm 9ffa4344c0a9ab9a301252437acca726e2699e7bb52f29ad73cb3c19ed378701 systemd-sysv-208-11.el7_0.2.i686.rpm 80578e0fb65dd7e2270bbd1fa5b5467ce3b5a2b398d8c3d4ab0cb3a45404bd6f systemd-sysv-208-11.el7_0.2.x86_64.rpm Source: adb8a8b36f7c3268856653065e14e18d0c566b5353f0e433a7839f47d40b95c5 systemd-208-11.el7_0.2.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ Message: 5 Date: Wed, 30 Jul 2014 18:25:59 +0000 From: Johnny Hughes <johnny(a)centos.org> Subject: [CentOS-announce] CEEA-2014:0990 CentOS 6 xorg-x11-drv-synaptics Enhancement Update To: centos-announce(a)centos.org Message-ID: <20140730182559.GA51898(a)n04.lon1.karan.org> Content-Type: text/plain; charset=us-ascii CentOS Errata and Enhancement Advisory 2014:0990 Upstream details at : https://rhn.redhat.com/errata/RHEA-2014-0990.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 2e1a2064c699ee5f40daa74f22bfb952fd413863c0c0179b963bb062cb1d3054 xorg-x11-drv-synaptics-1.7.1-10.el7_0.1.i686.rpm 8cbe8be7f916ad0aebcfe931996632116d1350caac3ca6845ff0e6d128586697 xorg-x11-drv-synaptics-1.7.1-10.el7_0.1.x86_64.rpm 8702aea0ce927798738bd33a294d3a90d78ba12d4717b51f7958b31d15dcb88c xorg-x11-drv-synaptics-devel-1.7.1-10.el7_0.1.i686.rpm 605e860c00c8a079d67600e1fd9d20b83a72fed9152e4ae7c690c19644708564 xorg-x11-drv-synaptics-devel-1.7.1-10.el7_0.1.x86_64.rpm Source: 30641c7baab2fe4b3ecc7330cf70a3e5359f4ab1495a9b0074774ff09e031695 xorg-x11-drv-synaptics-1.7.1-10.el7_0.1.src.rpm -- Johnny Hughes CentOS Project { http://www.centos.org/ } irc: hughesjr, #centos(a)irc.freenode.net ------------------------------ _______________________________________________ CentOS-announce mailing list CentOS-announce(a)centos.org http://lists.centos.org/mailman/listinfo/centos-announce End of CentOS-announce Digest, Vol 113, Issue 13 ************************************************

1 0

Re: [CentOS] wget: unable to resolve host address “xxxxx”
by Shital Sakhare 31 Jul '14

31 Jul '14

Hello again.. you can use the Subnet IP to 192.168.0 and Mask to 255.255.255.0 into the NAT setting of Virtual Network Editor provided by vmware. On Thu, Jul 31, 2014 at 4:55 PM, Shital Sakhare <shital.sakhare1(a)gmail.com> wrote: > Hello, > > PFA. This may resolve your issue. Because this settings works for me > everytime. > > > On Wed, Jul 30, 2014 at 10:41 AM, Theodore Si <sjyzhxw(a)gmail.com> wrote: > >> Hi all, >> >> I find that in my CentOS, which is installed in vmware, I can use yum to >> install software from Internet, and I can also ping websites, but I >> cannot download stuff using wget. >> I receive error msg unable to resolve host address “xxxxx”. The IP >> address is 192.168.80.128, and this is the content of /etc/resolv.conf >> # Generated by NetworkManager >> domain localdomain >> search localdomain >> nameserver 192.168.80.2 >> >> I'd appreciate your help. >> _______________________________________________ >> CentOS mailing list >> CentOS(a)centos.org >> http://lists.centos.org/mailman/listinfo/centos >> > >

1 0

CentOS 6 and android connectivity (Nook)
by m.roth＠5-cent.us 31 Jul '14

31 Jul '14

So, I got my wife a Nook for her b'day. I just plugged it into my system, CentOS 6.5, and what I see is /media/NOOK, and it shows 257k or so - yes, k, not m or g. It's *not* seeing any directories, etc, and the small thing I'm guessing is firmware, since even when I try mount -o remount -rw, it is still r/o. Googling, I see mentions of fsmtp, I think it was, and yum shows some mtp libs, but I don't see anything that looks like a driver. Any suggestions (otherwise, I need to zip up the ebooks we want on her Nook, and take them downstairs to her's and the kid's system, Lose 8, er, Win8. I really need to solve this today - we're leaving shortly on vacation.... Thanks in advance. mark

10 17

wget: unable to resolve host address “xxxxx”
by Theodore Si 31 Jul '14

31 Jul '14

Hi all, I find that in my CentOS, which is installed in vmware, I can use yum to install software from Internet, and I can also ping websites, but I cannot download stuff using wget. I receive error msg unable to resolve host address “xxxxx”. The IP address is 192.168.80.128, and this is the content of /etc/resolv.conf # Generated by NetworkManager domain localdomain search localdomain nameserver 192.168.80.2 I'd appreciate your help.

8 9

Centos 7: printing four copies with Libreoffice prints garbage
by Frank Cox 30 Jul '14

30 Jul '14

I have a Xerox Phaser 3250 printer It worked perfectly under Centos 6 when I told cups that it was a Xerox Phaser 3150. It works under Centos 7, too. I can print pdf files from evince and whatnot with no problems, and printing one, two or three copies of a document from libreoffice works as well. However, if I tell libreoffice to print four copies of a document ("number of copies" =4) then I get garbage printed on the printer; many many pages containing one or two lines of garbage characters. If I run the spadmin program and tell it to print a test page, it prints fine. Two test pages, fine. Three, also fine. Four test pages, and I get page after page after page of garbage again. What could the problem be? -- MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com

3 2

Re: [CentOS] Install php-imap using yum or any on CentOS 7
by Vivek Patil 30 Jul '14

30 Jul '14

[epel] name=Extra Packages for Enterprise Linux 7 - $basearch #baseurl=http://download.fedoraproject.org/pub/epel/7/$basearch mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=epel-7&arch=$bas… failovermethod=priority enabled=1 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7 [epel-debuginfo] name=Extra Packages for Enterprise Linux 7 - $basearch - Debug #baseurl=http://download.fedoraproject.org/pub/epel/7/$basearch/debug mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=epel-debug-7&arc… failovermethod=priority enabled=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7 gpgcheck=1 [epel-source] name=Extra Packages for Enterprise Linux 7 - $basearch - Source #baseurl=http://download.fedoraproject.org/pub/epel/7/SRPMS mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=epel-source-7&ar… failovermethod=priority enabled=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7 gpgcheck=1 On 7/30/2014 5:46 PM, Reindl Harald wrote: > [epel] > name=Extra Packages for Enterprise Linux 7 - $basearch > # baseurl=http://download.fedoraproject.org/pub/epel/7/$basearch > mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=epel-7&arch=$bas… > failovermethod=priority > enabled=1 > gpgcheck=1 > gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-7

3 2

Re: [CentOS] Install php-imap using yum or any on CentOS 7
by Vivek Patil 30 Jul '14

30 Jul '14

Tryed all enable ( 0 to 1 ) but no luck > cat epel.repo [epel] name=Extra Packages for Enterprise Linux 6 - $basearch #baseurl=http://download.fedoraproject.org/pub/epel/6/$basearch mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=epel-6&arch=$bas… failovermethod=priority enabled=1 gpgcheck=1 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6 [epel-debuginfo] name=Extra Packages for Enterprise Linux 6 - $basearch - Debug #baseurl=http://download.fedoraproject.org/pub/epel/6/$basearch/debug mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=epel-debug-6&arc… failovermethod=priority enabled=0 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6 gpgcheck=1 [epel-source] name=Extra Packages for Enterprise Linux 6 - $basearch - Source #baseurl=http://download.fedoraproject.org/pub/epel/6/SRPMS mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=epel-source-6&ar… failovermethod=priority enabled=0 gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6 gpgcheck=1

3 2

Centos 7 - how to play mp3
by ambrogio cirillo 30 Jul '14

30 Jul '14

Dear Sirs, no way to play mp3 on Centos 7. I tried all suggestions w/o success! Could you please tell me how to? Thank you in advance. Best regards, Ambrus

6 5

Re: [CentOS] Install php-imap using yum or any on CentOS 7
by Vivek Patil 30 Jul '14

30 Jul '14

I tryied 7 also from the following link but no luck http://www.tecmint.com/how-to-enable-epel-repository-for-rhel-centos-6-5/ Please guide me if m going wrong On 7/30/2014 5:39 PM, Reindl Harald wrote: > Am 30.07.2014 13:41, schrieb Vivek Patil: >> Tryed all enable ( 0 to 1 ) but no luck >>> cat epel.repo >> [epel] >> name=Extra Packages for Enterprise Linux 6 - $basearch >> #baseurl=http://download.fedoraproject.org/pub/epel/6/$basearch > your subject mentions CentOS7 and you installed EPEL6 > just read what you post while you compose a mail >

2 1

Re: [CentOS] Install php-imap using yum or any on CentOS 7
by Vivek Patil 30 Jul '14

30 Jul '14

Thanks for reply. I have already added epel repo ( see attached file ) On 7/30/2014 4:54 PM, Reindl Harald wrote: > > Am 30.07.2014 13:10, schrieb Vivek Patil: >> Refer my subject line and help me out > just add the epel repo which can be called mandatory > for webservers since a lot of important packages are > only there > > Name: php-imap > Architektur: x86_64 > Version: 5.4.16 > Ausgabe: 2.el7 > Größe: 36 k > Quelle: epel/x86_64 >

1 0

Install php-imap using yum or any on CentOS 7
by Vivek Patil 30 Jul '14

30 Jul '14

Hi All, Refer my subject line and help me out. Vivek

1 0

[CentOS 6.5]mounting hgfs shares failed
by Theodore Si 30 Jul '14

30 Jul '14

Hi all, I instaled a CentOS 6.5 in Vmware and installed the vmware-tools. Howerver, when I start up, it gives me the message that mounting hgfs shares [failed] How do I solve this, any thoughts?

1 0

Shrinking a RAID array
by Stephen Harris 30 Jul '14

30 Jul '14

My google-fu appears to be weak today... I currently have 8*4Tb in a RAID6. So far I'm only using 6Tb PV VG Fmt Attr PSize PFree Used /dev/md6 Large lvm2 a-- 21.83t 15.37t 6.46t Let's say I wanted to remove 2 of these disks from the array and shrink it down to a 6*4Tb How would I do this? -- rgds Stephen

2 1

Convert "bare partition" to RAID1 / mdadm?
by Lists 30 Jul '14

30 Jul '14

I have a large disk full of data that I'd like to upgrade to SW RAID 1 with a minimum of downtime. Taking it offline for a day or more to rsync all the files over is a non-starter. Since I've mounted SW RAID1 drives directly with "mount -t ext3 /dev/sdX" it would seem possible to flip the process around, perhaps change the partition type with fdisk or parted, and remount as SW RAID1? I'm not trying to move over the O/S, just a data paritition with LOTS of data. So far, Google pounding has resulted in howtos like this one that's otherwise quite useful, but has a big "copy all your data over" step I'd like to skip: http://sysadmin.compxtreme.ro/how-to-migrate-a-single-disk-linux-system-to-… But it would seem to me that a sequence roughly like this should work without having to recopy all the files. 1) umount /var/data; 2) parted /dev/sdX (change type to fd - Linux RAID auto) 3) Set some volume parameters so it's seen as a RAID1 partition "Degraded". (parted?) 4) ??? Insert mdadm magic here ??? 5) Profit! `mount /dev/md1 /var/data` Wondering if anybody has done anything like this before... -Ben

12 23

Initial Boot from 6.3 minimal halts with strange video display
by James B. Byrne 29 Jul '14

29 Jul '14

I am using a Leveno M58 (model CTO7483 from 2008) for C6/7 experimentation purposes. The thing has a dual core and ~4Gb RAM with a (newly installed) 500GB HDD. I successfully installed CentOS-6.5-minimal from a freshly burned, and verified, DVD from and ISO image whose SHA has been checked and passed. everything about the display was normal throughout that process. When the system boots from disk then I get the normal display up to the point that the kernel is selected (whether by hand or automatically). I can edit the kernel command line and otherwise use the pre-boot selector facility. After that point the monitor, a BenQ 17" LCD, immediate goes into what I can only describe as a psychedelic snow field with two narrow black bands surrounding a broader white band displayed at the top of the screen and a single narrower black band at the bottom. I have tried booting into RL3 by appending a 3 to the end of the kernel command but this has not apparent effect on the outcome. Any suggestions on how to proceed? -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

5 10

[OT] Leveno HDD caddies
by James B. Byrne 29 Jul '14

29 Jul '14

Never mind. One can flex the caddy sufficiently to pop the drive. Although this is definitely not the supported procedure. The case is marked by the vendor with 'Non-Return Hard Drive Machine'. -- *** E-Mail is NOT a SECURE channel *** James B. Byrne mailto:ByrneJB@Harte-Lyne.ca Harte & Lyne Limited http://www.harte-lyne.ca 9 Brockley Drive vox: +1 905 561 1241 Hamilton, Ontario fax: +1 905 561 0757 Canada L8E 3C3

3 2

screensaver in C7
by Fred Smith 29 Jul '14

29 Jul '14

I'm at the stage of poking at a C7 install in Vbox, and am struggling to figure out how to control the screensaver. there doesn't seem to be a gnome screensaver package (like there was in gnome2), and I can't find any installed packages that control it. gconf-editor doesn't have anything that looks promising... how does one control the screensaver in Gnome 3? thanks! -- ---- Fred Smith -- fredex(a)fcshome.stoneham.ma.us ----------------------------- The Lord is like a strong tower. Those who do what is right can run to him for safety. --------------------------- Proverbs 18:10 (niv) -----------------------------

4 6

exim-mysql without MySQL support from epel
by Fosforo 29 Jul '14

29 Jul '14

# head -1 /etc/centos-release CentOS release 6.5 (Final) Anyone using exim with MySQL support from epel without compiling direct from sources? I installed both packages below from epel: Installing: exim x86_64 4.72-5.el6 epel 1.2 M exim-mysql x86_64 4.72-5.el6 epel 24 k # rpm -qa | grep exim exim-mysql-4.72-5.el6.x86_64 exim-4.72-5.el6.x86_64 The .so seems to be included: # locate lookup | grep mysql /usr/lib64/exim/4.72-5.el6/lookups/mysql.so but no suppport builtin in the binary: # exim -bV | grep Lookup Lookups (built-in): lsearch wildlsearch nwildlsearch iplsearch cdb dbm dbmnz dnsdb dsearch ldap ldapdn ldapm nis nis0 nisplus passwd sqlite Am I doing something wrong? -- []s Fosforo ------------------------------------------------------------- "Se eu tiver oito horas pra cortar uma arvore, passarei seis afiando meu machado." -Abraham Lincoln -------------------------------------------------------------

3 2

Try KDE Plasma Workspaces
by Wes James 29 Jul '14

29 Jul '14

I installed KDE Plasma Workspaces on centos 7 in virtualbox. I didn't find in any settings panel or during login a way to use it. I googled to see how to use it, but there are some that say do this but then someone says no do this (editing some files). I've used some linux distros that allow you to choose during login which to use. Since I don't see it at login after a reboot, is there a gui or a file to edit to allow me to try it? Thanks, -wes

2 2

Re: [CentOS] Balancing IRQs
by Jatin Davey 29 Jul '14

29 Jul '14

On 7/29/2014 12:03 PM, Reindl Harald wrote: > Am 29.07.2014 08:16, schrieb Jatin Davey: >> From the above output i can see that all the interrupts are hitting the >> cpu0 and thats why it is used more than any other core in the system. >> >> Can someone please help me in distributing the interrupts across all the >> cores so that all are used which will eventually result in a better >> performance of my system > yum install irqbalance > chkconfig irqbalance on > service irqbalance start > > anything above is out of your scope because it's the kernels job > Thanks Reindl, I will try out irqbalance and see if it helps. Appreciate your response in this regard. Thanks Jatin

1 0

Balancing IRQs
by Jatin Davey 29 Jul '14

29 Jul '14

Hi All I am using the following Linux version for my application: **************************************** [root@localhost ~]# uname -a Linux localhost.localdom 2.6.18-164.el5 #1 SMP Thu Sep 3 03:28:30 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux **************************************** **************************************** [root@localhost ~]# cat /etc/*release CentOS release 5.4 (Final) **************************************** When my application is running on the server i can see only one core being used heavily while the other cores are not being used much. My application has a major workload is collecting data from the eth0 interface and then doing a lot of processing with the data in the database. So i can say that the Disk I/O and Network I/O are the major contributors towards the workload. from the /proc/interrupts file i can see the following: **************************************************** [root@localhost ~]# cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 0: 16084980 0 0 0 IO-APIC-edge timer 1: 141 0 0 0 IO-APIC-edge i8042 6: 5 0 0 0 IO-APIC-edge floppy 7: 0 0 0 0 IO-APIC-edge parport0 8: 0 0 0 0 IO-APIC-edge rtc 9: 0 0 0 0 IO-APIC-level acpi 12: 251 0 0 0 IO-APIC-edge i8042 51: 2410224 0 0 0 IO-APIC-level ioc0 59: 11358257 0 0 0 IO-APIC-level eth0 NMI: 0 0 0 0 LOC: 16086147 16090336 16090320 16089691 ERR: 0 MIS: 0 **************************************************** From the above output i can see that all the interrupts are hitting the cpu0 and thats why it is used more than any other core in the system. Can someone please help me in distributing the interrupts across all the cores so that all are used which will eventually result in a better performance of my system. Appreciate your response in this regard. Thanks Jatin

3 4

How can I connect CentOS7 via xdmcp?
by Kosuke Yagi 29 Jul '14

29 Jul '14

Dear all, Does any one success to connect CentOS7 via xdmcp? I've tried, but not yet succeeded. 1) CentOS7 with Development and Creative workstation 2) Disabled SELinux by editing /etc/selinux/config 3) Disabled firewalld by systemctl disable firewalld 4) Enabled xdmcp by editing /etc/gdm/custom.conf Adding "Enable=true" in [xdmcp] section 5) reboot 7) connect from windows7 PC with Xming-6.9.0.31 "One window" mode with xdmcp connection -> This is not working. How I can do next step? Additional information, I can open single Xterm window through Xming "Multiple windows" mode, but I can't open gnome-terminal with same way. I guessed this means thomething wrong in gnome or gdm working witn remote X or xdmcp. But I have no idea to resolve it. Best regards, Kosuke Yagi

2 2

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Discuss